bnxt_en: add support for rx-copybreak ethtool command

The bnxt_en driver supports rx-copybreak, but it couldn't be set by
userspace. Only the default value(256) has worked.
This patch makes the bnxt_en driver support following command.
`ethtool --set-tunable <devname> rx-copybreak <value> ` and
`ethtool --get-tunable <devname> rx-copybreak`.

By this patch, hds_threshol is set to the rx-copybreak value.
But it will be set by `ethtool -G eth0 hds-thresh N`
in the next patch.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-7-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -81,7 +81,6 @@ MODULE_DESCRIPTION("Broadcom NetXtreme network driver");
 
 #define BNXT_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
 #define BNXT_RX_DMA_OFFSET NET_SKB_PAD
-#define BNXT_RX_COPY_THRESH 256
 
 #define BNXT_TX_PUSH_THRESH 164
 
@@ -1343,13 +1342,13 @@ static struct sk_buff *bnxt_copy_data(struct bnxt_napi *bnapi, u8 *data,
 	if (!skb)
 		return NULL;
 
-	dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copy_thresh,
+	dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copybreak,
 				bp->rx_dir);
 
 	memcpy(skb->data - NET_IP_ALIGN, data - NET_IP_ALIGN,
 	       len + NET_IP_ALIGN);
 
-	dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copy_thresh,
+	dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copybreak,
 				   bp->rx_dir);
 
 	skb_put(skb, len);
@@ -1842,7 +1841,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
 		return NULL;
 	}
 
-	if (len <= bp->rx_copy_thresh) {
+	if (len <= bp->rx_copybreak) {
 		skb = bnxt_copy_skb(bnapi, data_ptr, len, mapping);
 		if (!skb) {
 			bnxt_abort_tpa(cpr, idx, agg_bufs);
@@ -2176,7 +2175,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 		}
 	}
 
-	if (len <= bp->rx_copy_thresh) {
+	if (len <= bp->rx_copybreak) {
 		if (!xdp_active)
 			skb = bnxt_copy_skb(bnapi, data_ptr, len, dma_addr);
 		else
@@ -4608,6 +4607,11 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
 		bp->flags |= BNXT_FLAG_GRO;
 }
 
+static void bnxt_init_ring_params(struct bnxt *bp)
+{
+	bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
+}
+
 /* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
  * be set on entry.
  */
@@ -4622,7 +4626,6 @@ void bnxt_set_ring_params(struct bnxt *bp)
 	rx_space = rx_size + ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) +
 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
-	bp->rx_copy_thresh = BNXT_RX_COPY_THRESH;
 	ring_size = bp->rx_ring_size;
 	bp->rx_agg_ring_size = 0;
 	bp->rx_agg_nr_pages = 0;
@@ -4667,7 +4670,9 @@ void bnxt_set_ring_params(struct bnxt *bp)
 				  ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) -
 				  SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 		} else {
-			rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
+			rx_size = SKB_DATA_ALIGN(max(BNXT_DEFAULT_RX_COPYBREAK,
+						     bp->rx_copybreak) +
+						 NET_IP_ALIGN);
 			rx_space = rx_size + NET_SKB_PAD +
 				SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 		}
@@ -6573,16 +6578,14 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
 
 	req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT);
 	req->enables = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID);
+	req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
 
-	if (BNXT_RX_PAGE_MODE(bp)) {
+	if (!BNXT_RX_PAGE_MODE(bp) && (bp->flags & BNXT_FLAG_AGG_RINGS)) {
-		req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
-	} else {
 		req->flags |= cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
 					  VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
 		req->enables |=
 			cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
-		req->jumbo_thresh = cpu_to_le16(bp->rx_copy_thresh);
+		req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
-		req->hds_threshold = cpu_to_le16(bp->rx_copy_thresh);
 	}
 	req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
 	return hwrm_req_send(bp, req);
@@ -16261,6 +16264,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	bnxt_init_l2_fltr_tbl(bp);
 	bnxt_set_rx_skb_mode(bp, false);
 	bnxt_set_tpa_flags(bp);
+	bnxt_init_ring_params(bp);
 	bnxt_set_ring_params(bp);
 	bnxt_rdma_aux_device_init(bp);
 	rc = bnxt_set_dflt_rings(bp, true);

drivers/net/ethernet/broadcom/bnxt/bnxt.h

@@ -34,6 +34,9 @@
 #include <linux/firmware/broadcom/tee_bnxt_fw.h>
 #endif
 
+#define BNXT_DEFAULT_RX_COPYBREAK 256
+#define BNXT_MAX_RX_COPYBREAK 1024
+
 extern struct list_head bnxt_block_cb_list;
 
 struct page_pool;
@@ -2347,7 +2350,7 @@ struct bnxt {
 	enum dma_data_direction	rx_dir;
 	u32			rx_ring_size;
 	u32			rx_agg_ring_size;
-	u32			rx_copy_thresh;
+	u32			rx_copybreak;
 	u32			rx_ring_mask;
 	u32			rx_agg_ring_mask;
 	int			rx_nr_pages;

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

@@ -4328,6 +4328,45 @@ static int bnxt_get_eee(struct net_device *dev, struct ethtool_keee *edata)
 	return 0;
 }
 
+static int bnxt_set_tunable(struct net_device *dev,
+			    const struct ethtool_tunable *tuna,
+			    const void *data)
+{
+	struct bnxt *bp = netdev_priv(dev);
+	u32 rx_copybreak;
+
+	switch (tuna->id) {
+	case ETHTOOL_RX_COPYBREAK:
+		rx_copybreak = *(u32 *)data;
+		if (rx_copybreak > BNXT_MAX_RX_COPYBREAK)
+			return -ERANGE;
+		if (rx_copybreak != bp->rx_copybreak) {
+			if (netif_running(dev))
+				return -EBUSY;
+			bp->rx_copybreak = rx_copybreak;
+		}
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int bnxt_get_tunable(struct net_device *dev,
+			    const struct ethtool_tunable *tuna, void *data)
+{
+	struct bnxt *bp = netdev_priv(dev);
+
+	switch (tuna->id) {
+	case ETHTOOL_RX_COPYBREAK:
+		*(u32 *)data = bp->rx_copybreak;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
 static int bnxt_read_sfp_module_eeprom_info(struct bnxt *bp, u16 i2c_addr,
 					    u16 page_number, u8 bank,
 					    u16 start_addr, u16 data_length,
@@ -4790,7 +4829,8 @@ static int bnxt_run_loopback(struct bnxt *bp)
 	cpr = &rxr->bnapi->cp_ring;
 	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
 		cpr = rxr->rx_cpr;
-	pkt_size = min(bp->dev->mtu + ETH_HLEN, bp->rx_copy_thresh);
+	pkt_size = min(bp->dev->mtu + ETH_HLEN, max(BNXT_DEFAULT_RX_COPYBREAK,
+						    bp->rx_copybreak));
 	skb = netdev_alloc_skb(bp->dev, pkt_size);
 	if (!skb)
 		return -ENOMEM;
@@ -5372,6 +5412,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
 	.get_link_ext_stats	= bnxt_get_link_ext_stats,
 	.get_eee		= bnxt_get_eee,
 	.set_eee		= bnxt_set_eee,
+	.get_tunable		= bnxt_get_tunable,
+	.set_tunable		= bnxt_set_tunable,
 	.get_module_info	= bnxt_get_module_info,
 	.get_module_eeprom	= bnxt_get_module_eeprom,
 	.get_module_eeprom_by_page = bnxt_get_module_eeprom_by_page,