mirror of
https://github.com/torvalds/linux.git
synced 2025-11-04 10:40:15 +02:00
cpufreq: intel_pstate: Document the current behavior and user interface
Add a document describing the current behavior and user space interface of the intel_pstate driver in the RST format and drop the existing outdated intel_pstate.txt document. Also update admin-guide/pm/cpufreq.rst with proper RST references to the new intel_pstate.rst document. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Rafael J. Wysocki
parent
2ea659a9ef
commit
33fc30b470
4 changed files with 766 additions and 290 deletions
|
|
@ -1,4 +1,5 @@
|
||||||
.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
|
.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
|
||||||
|
.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
|
||||||
|
|
||||||
=======================
|
=======================
|
||||||
CPU Performance Scaling
|
CPU Performance Scaling
|
||||||
|
|
@ -75,7 +76,7 @@ feedback registers, as that information is typically specific to the hardware
|
||||||
interface it comes from and may not be easily represented in an abstract,
|
interface it comes from and may not be easily represented in an abstract,
|
||||||
platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
|
platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
|
||||||
to bypass the governor layer and implement their own performance scaling
|
to bypass the governor layer and implement their own performance scaling
|
||||||
algorithms. That is done by the ``intel_pstate`` scaling driver.
|
algorithms. That is done by the |intel_pstate| scaling driver.
|
||||||
|
|
||||||
|
|
||||||
``CPUFreq`` Policy Objects
|
``CPUFreq`` Policy Objects
|
||||||
|
|
@ -174,13 +175,13 @@ necessary to restart the scaling governor so that it can take the new online CPU
|
||||||
into account. That is achieved by invoking the governor's ``->stop`` and
|
into account. That is achieved by invoking the governor's ``->stop`` and
|
||||||
``->start()`` callbacks, in this order, for the entire policy.
|
``->start()`` callbacks, in this order, for the entire policy.
|
||||||
|
|
||||||
As mentioned before, the ``intel_pstate`` scaling driver bypasses the scaling
|
As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
|
||||||
governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
|
governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
|
||||||
Consequently, if ``intel_pstate`` is used, scaling governors are not attached to
|
Consequently, if |intel_pstate| is used, scaling governors are not attached to
|
||||||
new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
|
new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
|
||||||
to register per-CPU utilization update callbacks for each policy. These
|
to register per-CPU utilization update callbacks for each policy. These
|
||||||
callbacks are invoked by the CPU scheduler in the same way as for scaling
|
callbacks are invoked by the CPU scheduler in the same way as for scaling
|
||||||
governors, but in the ``intel_pstate`` case they both determine the P-state to
|
governors, but in the |intel_pstate| case they both determine the P-state to
|
||||||
use and change the hardware configuration accordingly in one go from scheduler
|
use and change the hardware configuration accordingly in one go from scheduler
|
||||||
context.
|
context.
|
||||||
|
|
||||||
|
|
@ -257,7 +258,7 @@ are the following:
|
||||||
|
|
||||||
``scaling_available_governors``
|
``scaling_available_governors``
|
||||||
List of ``CPUFreq`` scaling governors present in the kernel that can
|
List of ``CPUFreq`` scaling governors present in the kernel that can
|
||||||
be attached to this policy or (if the ``intel_pstate`` scaling driver is
|
be attached to this policy or (if the |intel_pstate| scaling driver is
|
||||||
in use) list of scaling algorithms provided by the driver that can be
|
in use) list of scaling algorithms provided by the driver that can be
|
||||||
applied to this policy.
|
applied to this policy.
|
||||||
|
|
||||||
|
|
@ -274,7 +275,7 @@ are the following:
|
||||||
the CPU is actually running at (due to hardware design and other
|
the CPU is actually running at (due to hardware design and other
|
||||||
limitations).
|
limitations).
|
||||||
|
|
||||||
Some scaling drivers (e.g. ``intel_pstate``) attempt to provide
|
Some scaling drivers (e.g. |intel_pstate|) attempt to provide
|
||||||
information more precisely reflecting the current CPU frequency through
|
information more precisely reflecting the current CPU frequency through
|
||||||
this attribute, but that still may not be the exact current CPU
|
this attribute, but that still may not be the exact current CPU
|
||||||
frequency as seen by the hardware at the moment.
|
frequency as seen by the hardware at the moment.
|
||||||
|
|
@ -284,13 +285,13 @@ are the following:
|
||||||
|
|
||||||
``scaling_governor``
|
``scaling_governor``
|
||||||
The scaling governor currently attached to this policy or (if the
|
The scaling governor currently attached to this policy or (if the
|
||||||
``intel_pstate`` scaling driver is in use) the scaling algorithm
|
|intel_pstate| scaling driver is in use) the scaling algorithm
|
||||||
provided by the driver that is currently applied to this policy.
|
provided by the driver that is currently applied to this policy.
|
||||||
|
|
||||||
This attribute is read-write and writing to it will cause a new scaling
|
This attribute is read-write and writing to it will cause a new scaling
|
||||||
governor to be attached to this policy or a new scaling algorithm
|
governor to be attached to this policy or a new scaling algorithm
|
||||||
provided by the scaling driver to be applied to it (in the
|
provided by the scaling driver to be applied to it (in the
|
||||||
``intel_pstate`` case), as indicated by the string written to this
|
|intel_pstate| case), as indicated by the string written to this
|
||||||
attribute (which must be one of the names listed by the
|
attribute (which must be one of the names listed by the
|
||||||
``scaling_available_governors`` attribute described above).
|
``scaling_available_governors`` attribute described above).
|
||||||
|
|
||||||
|
|
@ -619,7 +620,7 @@ This file is located under :file:`/sys/devices/system/cpu/cpufreq/` and controls
|
||||||
the "boost" setting for the whole system. It is not present if the underlying
|
the "boost" setting for the whole system. It is not present if the underlying
|
||||||
scaling driver does not support the frequency boost mechanism (or supports it,
|
scaling driver does not support the frequency boost mechanism (or supports it,
|
||||||
but provides a driver-specific interface for controlling it, like
|
but provides a driver-specific interface for controlling it, like
|
||||||
``intel_pstate``).
|
|intel_pstate|).
|
||||||
|
|
||||||
If the value in this file is 1, the frequency boost mechanism is enabled. This
|
If the value in this file is 1, the frequency boost mechanism is enabled. This
|
||||||
means that either the hardware can be put into states in which it is able to
|
means that either the hardware can be put into states in which it is able to
|
||||||
|
|
|
||||||
|
|
@ -6,6 +6,7 @@ Power Management
|
||||||
:maxdepth: 2
|
:maxdepth: 2
|
||||||
|
|
||||||
cpufreq
|
cpufreq
|
||||||
|
intel_pstate
|
||||||
|
|
||||||
.. only:: subproject and html
|
.. only:: subproject and html
|
||||||
|
|
||||||
|
|
|
||||||
755
Documentation/admin-guide/pm/intel_pstate.rst
Normal file
755
Documentation/admin-guide/pm/intel_pstate.rst
Normal file
|
|
@ -0,0 +1,755 @@
|
||||||
|
===============================================
|
||||||
|
``intel_pstate`` CPU Performance Scaling Driver
|
||||||
|
===============================================
|
||||||
|
|
||||||
|
::
|
||||||
|
|
||||||
|
Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||||||
|
|
||||||
|
|
||||||
|
General Information
|
||||||
|
===================
|
||||||
|
|
||||||
|
``intel_pstate`` is a part of the
|
||||||
|
:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
|
||||||
|
(``CPUFreq``). It is a scaling driver for the Sandy Bridge and later
|
||||||
|
generations of Intel processors. Note, however, that some of those processors
|
||||||
|
may not be supported. [To understand ``intel_pstate`` it is necessary to know
|
||||||
|
how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
|
||||||
|
you have not done that yet.]
|
||||||
|
|
||||||
|
For the processors supported by ``intel_pstate``, the P-state concept is broader
|
||||||
|
than just an operating frequency or an operating performance point (see the
|
||||||
|
`LinuxCon Europe 2015 presentation by Kristen Accardi <LCEU2015_>`_ for more
|
||||||
|
information about that). For this reason, the representation of P-states used
|
||||||
|
by ``intel_pstate`` internally follows the hardware specification (for details
|
||||||
|
refer to `Intel® 64 and IA-32 Architectures Software Developer’s Manual
|
||||||
|
Volume 3: System Programming Guide <SDM_>`_). However, the ``CPUFreq`` core
|
||||||
|
uses frequencies for identifying operating performance points of CPUs and
|
||||||
|
frequencies are involved in the user space interface exposed by it, so
|
||||||
|
``intel_pstate`` maps its internal representation of P-states to frequencies too
|
||||||
|
(fortunately, that mapping is unambiguous). At the same time, it would not be
|
||||||
|
practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
|
||||||
|
available frequencies due to the possible size of it, so the driver does not do
|
||||||
|
that. Some functionality of the core is limited by that.
|
||||||
|
|
||||||
|
Since the hardware P-state selection interface used by ``intel_pstate`` is
|
||||||
|
available at the logical CPU level, the driver always works with individual
|
||||||
|
CPUs. Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
|
||||||
|
object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
|
||||||
|
equivalent to CPUs. In particular, this means that they become "inactive" every
|
||||||
|
time the corresponding CPU is taken offline and need to be re-initialized when
|
||||||
|
it goes back online.
|
||||||
|
|
||||||
|
``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
|
||||||
|
only way to pass early-configuration-time parameters to it is via the kernel
|
||||||
|
command line. However, its configuration can be adjusted via ``sysfs`` to a
|
||||||
|
great extent. In some configurations it even is possible to unregister it via
|
||||||
|
``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
|
||||||
|
registered (see `below <status_attr_>`_).
|
||||||
|
|
||||||
|
|
||||||
|
Operation Modes
|
||||||
|
===============
|
||||||
|
|
||||||
|
``intel_pstate`` can operate in three different modes: in the active mode with
|
||||||
|
or without hardware-managed P-states support and in the passive mode. Which of
|
||||||
|
them will be in effect depends on what kernel command line options are used and
|
||||||
|
on the capabilities of the processor.
|
||||||
|
|
||||||
|
Active Mode
|
||||||
|
-----------
|
||||||
|
|
||||||
|
This is the default operation mode of ``intel_pstate``. If it works in this
|
||||||
|
mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
|
||||||
|
policies contains the string "intel_pstate".
|
||||||
|
|
||||||
|
In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
|
||||||
|
provides its own scaling algorithms for P-state selection. Those algorithms
|
||||||
|
can be applied to ``CPUFreq`` policies in the same way as generic scaling
|
||||||
|
governors (that is, through the ``scaling_governor`` policy attribute in
|
||||||
|
``sysfs``). [Note that different P-state selection algorithms may be chosen for
|
||||||
|
different policies, but that is not recommended.]
|
||||||
|
|
||||||
|
They are not generic scaling governors, but their names are the same as the
|
||||||
|
names of some of those governors. Moreover, confusingly enough, they generally
|
||||||
|
do not work in the same way as the generic governors they share the names with.
|
||||||
|
For example, the ``powersave`` P-state selection algorithm provided by
|
||||||
|
``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
|
||||||
|
(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
|
||||||
|
|
||||||
|
There are two P-state selection algorithms provided by ``intel_pstate`` in the
|
||||||
|
active mode: ``powersave`` and ``performance``. The way they both operate
|
||||||
|
depends on whether or not the hardware-managed P-states (HWP) feature has been
|
||||||
|
enabled in the processor and possibly on the processor model.
|
||||||
|
|
||||||
|
Which of the P-state selection algorithms is used by default depends on the
|
||||||
|
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
|
||||||
|
Namely, if that option is set, the ``performance`` algorithm will be used by
|
||||||
|
default, and the other one will be used by default if it is not set.
|
||||||
|
|
||||||
|
Active Mode With HWP
|
||||||
|
~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
If the processor supports the HWP feature, it will be enabled during the
|
||||||
|
processor initialization and cannot be disabled after that. It is possible
|
||||||
|
to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
|
||||||
|
kernel in the command line.
|
||||||
|
|
||||||
|
If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
|
||||||
|
select P-states by itself, but still it can give hints to the processor's
|
||||||
|
internal P-state selection logic. What those hints are depends on which P-state
|
||||||
|
selection algorithm has been applied to the given policy (or to the CPU it
|
||||||
|
corresponds to).
|
||||||
|
|
||||||
|
Even though the P-state selection is carried out by the processor automatically,
|
||||||
|
``intel_pstate`` registers utilization update callbacks with the CPU scheduler
|
||||||
|
in this mode. However, they are not used for running a P-state selection
|
||||||
|
algorithm, but for periodic updates of the current CPU frequency information to
|
||||||
|
be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
|
||||||
|
|
||||||
|
HWP + ``performance``
|
||||||
|
.....................
|
||||||
|
|
||||||
|
In this configuration ``intel_pstate`` will write 0 to the processor's
|
||||||
|
Energy-Performance Preference (EPP) knob (if supported) or its
|
||||||
|
Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
|
||||||
|
internal P-state selection logic is expected to focus entirely on performance.
|
||||||
|
|
||||||
|
This will override the EPP/EPB setting coming from the ``sysfs`` interface
|
||||||
|
(see `Energy vs Performance Hints`_ below).
|
||||||
|
|
||||||
|
Also, in this configuration the range of P-states available to the processor's
|
||||||
|
internal P-state selection logic is always restricted to the upper boundary
|
||||||
|
(that is, the maximum P-state that the driver is allowed to use).
|
||||||
|
|
||||||
|
HWP + ``powersave``
|
||||||
|
...................
|
||||||
|
|
||||||
|
In this configuration ``intel_pstate`` will set the processor's
|
||||||
|
Energy-Performance Preference (EPP) knob (if supported) or its
|
||||||
|
Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
|
||||||
|
previously set to via ``sysfs`` (or whatever default value it was
|
||||||
|
set to by the platform firmware). This usually causes the processor's
|
||||||
|
internal P-state selection logic to be less performance-focused.
|
||||||
|
|
||||||
|
Active Mode Without HWP
|
||||||
|
~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
This is the default operation mode for processors that do not support the HWP
|
||||||
|
feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
|
||||||
|
in the kernel command line. However, in this mode ``intel_pstate`` may refuse
|
||||||
|
to work with the given processor if it does not recognize it. [Note that
|
||||||
|
``intel_pstate`` will never refuse to work with any processor with the HWP
|
||||||
|
feature enabled.]
|
||||||
|
|
||||||
|
In this mode ``intel_pstate`` registers utilization update callbacks with the
|
||||||
|
CPU scheduler in order to run a P-state selection algorithm, either
|
||||||
|
``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
|
||||||
|
setting in ``sysfs``. The current CPU frequency information to be made
|
||||||
|
available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
|
||||||
|
periodically updated by those utilization update callbacks too.
|
||||||
|
|
||||||
|
``performance``
|
||||||
|
...............
|
||||||
|
|
||||||
|
Without HWP, this P-state selection algorithm is always the same regardless of
|
||||||
|
the processor model and platform configuration.
|
||||||
|
|
||||||
|
It selects the maximum P-state it is allowed to use, subject to limits set via
|
||||||
|
``sysfs``, every time the P-state selection computations are carried out by the
|
||||||
|
driver's utilization update callback for the given CPU (that does not happen
|
||||||
|
more often than every 10 ms), but the hardware configuration will not be changed
|
||||||
|
if the new P-state is the same as the current one.
|
||||||
|
|
||||||
|
This is the default P-state selection algorithm if the
|
||||||
|
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
|
||||||
|
is set.
|
||||||
|
|
||||||
|
``powersave``
|
||||||
|
.............
|
||||||
|
|
||||||
|
Without HWP, this P-state selection algorithm generally depends on the
|
||||||
|
processor model and/or the system profile setting in the ACPI tables and there
|
||||||
|
are two variants of it.
|
||||||
|
|
||||||
|
One of them is used with processors from the Atom line and (regardless of the
|
||||||
|
processor model) on platforms with the system profile in the ACPI tables set to
|
||||||
|
"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or
|
||||||
|
"workstation". It is also used with processors supporting the HWP feature if
|
||||||
|
that feature has not been enabled (that is, with the ``intel_pstate=no_hwp``
|
||||||
|
argument in the kernel command line). It is similar to the algorithm
|
||||||
|
implemented by the generic ``schedutil`` scaling governor except that the
|
||||||
|
utilization metric used by it is based on numbers coming from feedback
|
||||||
|
registers of the CPU. It generally selects P-states proportional to the
|
||||||
|
current CPU utilization, so it is referred to as the "proportional" algorithm.
|
||||||
|
|
||||||
|
The second variant of the ``powersave`` P-state selection algorithm, used in all
|
||||||
|
of the other cases (generally, on processors from the Core line, so it is
|
||||||
|
referred to as the "Core" algorithm), is based on the values read from the APERF
|
||||||
|
and MPERF feedback registers and the previously requested target P-state.
|
||||||
|
It does not really take CPU utilization into account explicitly, but as a rule
|
||||||
|
it causes the CPU P-state to ramp up very quickly in response to increased
|
||||||
|
utilization which is generally desirable in server environments.
|
||||||
|
|
||||||
|
Regardless of the variant, this algorithm is run by the driver's utilization
|
||||||
|
update callback for the given CPU when it is invoked by the CPU scheduler, but
|
||||||
|
not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this
|
||||||
|
particular case <Tuning Interface in debugfs_>`_). Like in the ``performance``
|
||||||
|
case, the hardware configuration is not touched if the new P-state turns out to
|
||||||
|
be the same as the current one.
|
||||||
|
|
||||||
|
This is the default P-state selection algorithm if the
|
||||||
|
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
|
||||||
|
is not set.
|
||||||
|
|
||||||
|
Passive Mode
|
||||||
|
------------
|
||||||
|
|
||||||
|
This mode is used if the ``intel_pstate=passive`` argument is passed to the
|
||||||
|
kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
|
||||||
|
Like in the active mode without HWP support, in this mode ``intel_pstate`` may
|
||||||
|
refuse to work with the given processor if it does not recognize it.
|
||||||
|
|
||||||
|
If the driver works in this mode, the ``scaling_driver`` policy attribute in
|
||||||
|
``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
|
||||||
|
Then, the driver behaves like a regular ``CPUFreq`` scaling driver. That is,
|
||||||
|
it is invoked by generic scaling governors when necessary to talk to the
|
||||||
|
hardware in order to change the P-state of a CPU (in particular, the
|
||||||
|
``schedutil`` governor can invoke it directly from scheduler context).
|
||||||
|
|
||||||
|
While in this mode, ``intel_pstate`` can be used with all of the (generic)
|
||||||
|
scaling governors listed by the ``scaling_available_governors`` policy attribute
|
||||||
|
in ``sysfs`` (and the P-state selection algorithms described above are not
|
||||||
|
used). Then, it is responsible for the configuration of policy objects
|
||||||
|
corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
|
||||||
|
governors attached to the policy objects) with accurate information on the
|
||||||
|
maximum and minimum operating frequencies supported by the hardware (including
|
||||||
|
the so-called "turbo" frequency ranges). In other words, in the passive mode
|
||||||
|
the entire range of available P-states is exposed by ``intel_pstate`` to the
|
||||||
|
``CPUFreq`` core. However, in this mode the driver does not register
|
||||||
|
utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
|
||||||
|
information comes from the ``CPUFreq`` core (and is the last frequency selected
|
||||||
|
by the current scaling governor for the given policy).
|
||||||
|
|
||||||
|
|
||||||
|
.. _turbo:
|
||||||
|
|
||||||
|
Turbo P-states Support
|
||||||
|
======================
|
||||||
|
|
||||||
|
In the majority of cases, the entire range of P-states available to
|
||||||
|
``intel_pstate`` can be divided into two sub-ranges that correspond to
|
||||||
|
different types of processor behavior, above and below a boundary that
|
||||||
|
will be referred to as the "turbo threshold" in what follows.
|
||||||
|
|
||||||
|
The P-states above the turbo threshold are referred to as "turbo P-states" and
|
||||||
|
the whole sub-range of P-states they belong to is referred to as the "turbo
|
||||||
|
range". These names are related to the Turbo Boost technology allowing a
|
||||||
|
multicore processor to opportunistically increase the P-state of one or more
|
||||||
|
cores if there is enough power to do that and if that is not going to cause the
|
||||||
|
thermal envelope of the processor package to be exceeded.
|
||||||
|
|
||||||
|
Specifically, if software sets the P-state of a CPU core within the turbo range
|
||||||
|
(that is, above the turbo threshold), the processor is permitted to take over
|
||||||
|
performance scaling control for that core and put it into turbo P-states of its
|
||||||
|
choice going forward. However, that permission is interpreted differently by
|
||||||
|
different processor generations. Namely, the Sandy Bridge generation of
|
||||||
|
processors will never use any P-states above the last one set by software for
|
||||||
|
the given core, even if it is within the turbo range, whereas all of the later
|
||||||
|
processor generations will take it as a license to use any P-states from the
|
||||||
|
turbo range, even above the one set by software. In other words, on those
|
||||||
|
processors setting any P-state from the turbo range will enable the processor
|
||||||
|
to put the given core into all turbo P-states up to and including the maximum
|
||||||
|
supported one as it sees fit.
|
||||||
|
|
||||||
|
One important property of turbo P-states is that they are not sustainable. More
|
||||||
|
precisely, there is no guarantee that any CPUs will be able to stay in any of
|
||||||
|
those states indefinitely, because the power distribution within the processor
|
||||||
|
package may change over time or the thermal envelope it was designed for might
|
||||||
|
be exceeded if a turbo P-state was used for too long.
|
||||||
|
|
||||||
|
In turn, the P-states below the turbo threshold generally are sustainable. In
|
||||||
|
fact, if one of them is set by software, the processor is not expected to change
|
||||||
|
it to a lower one unless in a thermal stress or a power limit violation
|
||||||
|
situation (a higher P-state may still be used if it is set for another CPU in
|
||||||
|
the same package at the same time, for example).
|
||||||
|
|
||||||
|
Some processors allow multiple cores to be in turbo P-states at the same time,
|
||||||
|
but the maximum P-state that can be set for them generally depends on the number
|
||||||
|
of cores running concurrently. The maximum turbo P-state that can be set for 3
|
||||||
|
cores at the same time usually is lower than the analogous maximum P-state for
|
||||||
|
2 cores, which in turn usually is lower than the maximum turbo P-state that can
|
||||||
|
be set for 1 core. The one-core maximum turbo P-state is thus the maximum
|
||||||
|
supported one overall.
|
||||||
|
|
||||||
|
The maximum supported turbo P-state, the turbo threshold (the maximum supported
|
||||||
|
non-turbo P-state) and the minimum supported P-state are specific to the
|
||||||
|
processor model and can be determined by reading the processor's model-specific
|
||||||
|
registers (MSRs). Moreover, some processors support the Configurable TDP
|
||||||
|
(Thermal Design Power) feature and, when that feature is enabled, the turbo
|
||||||
|
threshold effectively becomes a configurable value that can be set by the
|
||||||
|
platform firmware.
|
||||||
|
|
||||||
|
Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
|
||||||
|
the entire range of available P-states, including the whole turbo range, to the
|
||||||
|
``CPUFreq`` core and (in the passive mode) to generic scaling governors. This
|
||||||
|
generally causes turbo P-states to be set more often when ``intel_pstate`` is
|
||||||
|
used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
|
||||||
|
for more information).
|
||||||
|
|
||||||
|
Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
|
||||||
|
(even if the Configurable TDP feature is enabled in the processor), its
|
||||||
|
``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
|
||||||
|
work as expected in all cases (that is, if set to disable turbo P-states, it
|
||||||
|
always should prevent ``intel_pstate`` from using them).
|
||||||
|
|
||||||
|
|
||||||
|
Processor Support
|
||||||
|
=================
|
||||||
|
|
||||||
|
To handle a given processor ``intel_pstate`` requires a number of different
|
||||||
|
pieces of information on it to be known, including:
|
||||||
|
|
||||||
|
* The minimum supported P-state.
|
||||||
|
|
||||||
|
* The maximum supported `non-turbo P-state <turbo_>`_.
|
||||||
|
|
||||||
|
* Whether or not turbo P-states are supported at all.
|
||||||
|
|
||||||
|
* The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
|
||||||
|
are supported).
|
||||||
|
|
||||||
|
* The scaling formula to translate the driver's internal representation
|
||||||
|
of P-states into frequencies and the other way around.
|
||||||
|
|
||||||
|
Generally, ways to obtain that information are specific to the processor model
|
||||||
|
or family. Although it often is possible to obtain all of it from the processor
|
||||||
|
itself (using model-specific registers), there are cases in which hardware
|
||||||
|
manuals need to be consulted to get to it too.
|
||||||
|
|
||||||
|
For this reason, there is a list of supported processors in ``intel_pstate`` and
|
||||||
|
the driver initialization will fail if the detected processor is not in that
|
||||||
|
list, unless it supports the `HWP feature <Active Mode_>`_. [The interface to
|
||||||
|
obtain all of the information listed above is the same for all of the processors
|
||||||
|
supporting the HWP feature, which is why they all are supported by
|
||||||
|
``intel_pstate``.]
|
||||||
|
|
||||||
|
|
||||||
|
User Space Interface in ``sysfs``
|
||||||
|
=================================
|
||||||
|
|
||||||
|
Global Attributes
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
|
||||||
|
control its functionality at the system level. They are located in the
|
||||||
|
``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
|
||||||
|
CPUs.
|
||||||
|
|
||||||
|
Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
|
||||||
|
argument is passed to the kernel in the command line.
|
||||||
|
|
||||||
|
``max_perf_pct``
|
||||||
|
Maximum P-state the driver is allowed to set in percent of the
|
||||||
|
maximum supported performance level (the highest supported `turbo
|
||||||
|
P-state <turbo_>`_).
|
||||||
|
|
||||||
|
This attribute will not be exposed if the
|
||||||
|
``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
|
||||||
|
command line.
|
||||||
|
|
||||||
|
``min_perf_pct``
|
||||||
|
Minimum P-state the driver is allowed to set in percent of the
|
||||||
|
maximum supported performance level (the highest supported `turbo
|
||||||
|
P-state <turbo_>`_).
|
||||||
|
|
||||||
|
This attribute will not be exposed if the
|
||||||
|
``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
|
||||||
|
command line.
|
||||||
|
|
||||||
|
``num_pstates``
|
||||||
|
Number of P-states supported by the processor (between 0 and 255
|
||||||
|
inclusive) including both turbo and non-turbo P-states (see
|
||||||
|
`Turbo P-states Support`_).
|
||||||
|
|
||||||
|
The value of this attribute is not affected by the ``no_turbo``
|
||||||
|
setting described `below <no_turbo_attr_>`_.
|
||||||
|
|
||||||
|
This attribute is read-only.
|
||||||
|
|
||||||
|
``turbo_pct``
|
||||||
|
Ratio of the `turbo range <turbo_>`_ size to the size of the entire
|
||||||
|
range of supported P-states, in percent.
|
||||||
|
|
||||||
|
This attribute is read-only.
|
||||||
|
|
||||||
|
.. _no_turbo_attr:
|
||||||
|
|
||||||
|
``no_turbo``
|
||||||
|
If set (equal to 1), the driver is not allowed to set any turbo P-states
|
||||||
|
(see `Turbo P-states Support`_). If unset (equalt to 0, which is the
|
||||||
|
default), turbo P-states can be set by the driver.
|
||||||
|
[Note that ``intel_pstate`` does not support the general ``boost``
|
||||||
|
attribute (supported by some other scaling drivers) which is replaced
|
||||||
|
by this one.]
|
||||||
|
|
||||||
|
This attrubute does not affect the maximum supported frequency value
|
||||||
|
supplied to the ``CPUFreq`` core and exposed via the policy interface,
|
||||||
|
but it affects the maximum possible value of per-policy P-state limits
|
||||||
|
(see `Interpretation of Policy Attributes`_ below for details).
|
||||||
|
|
||||||
|
.. _status_attr:
|
||||||
|
|
||||||
|
``status``
|
||||||
|
Operation mode of the driver: "active", "passive" or "off".
|
||||||
|
|
||||||
|
"active"
|
||||||
|
The driver is functional and in the `active mode
|
||||||
|
<Active Mode_>`_.
|
||||||
|
|
||||||
|
"passive"
|
||||||
|
The driver is functional and in the `passive mode
|
||||||
|
<Passive Mode_>`_.
|
||||||
|
|
||||||
|
"off"
|
||||||
|
The driver is not functional (it is not registered as a scaling
|
||||||
|
driver with the ``CPUFreq`` core).
|
||||||
|
|
||||||
|
This attribute can be written to in order to change the driver's
|
||||||
|
operation mode or to unregister it. The string written to it must be
|
||||||
|
one of the possible values of it and, if successful, the write will
|
||||||
|
cause the driver to switch over to the operation mode represented by
|
||||||
|
that string - or to be unregistered in the "off" case. [Actually,
|
||||||
|
switching over from the active mode to the passive mode or the other
|
||||||
|
way around causes the driver to be unregistered and registered again
|
||||||
|
with a different set of callbacks, so all of its settings (the global
|
||||||
|
as well as the per-policy ones) are then reset to their default
|
||||||
|
values, possibly depending on the target operation mode.]
|
||||||
|
|
||||||
|
That only is supported in some configurations, though (for example, if
|
||||||
|
the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
|
||||||
|
the operation mode of the driver cannot be changed), and if it is not
|
||||||
|
supported in the current configuration, writes to this attribute with
|
||||||
|
fail with an appropriate error.
|
||||||
|
|
||||||
|
Interpretation of Policy Attributes
|
||||||
|
-----------------------------------
|
||||||
|
|
||||||
|
The interpretation of some ``CPUFreq`` policy attributes described in
|
||||||
|
:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
|
||||||
|
and it generally depends on the driver's `operation mode <Operation Modes_>`_.
|
||||||
|
|
||||||
|
First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
|
||||||
|
``scaling_cur_freq`` attributes are produced by applying a processor-specific
|
||||||
|
multiplier to the internal P-state representation used by ``intel_pstate``.
|
||||||
|
Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
|
||||||
|
attributes are capped by the frequency corresponding to the maximum P-state that
|
||||||
|
the driver is allowed to set.
|
||||||
|
|
||||||
|
If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
|
||||||
|
not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
|
||||||
|
and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
|
||||||
|
Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
|
||||||
|
``scaling_min_freq`` to go down to that value if they were above it before.
|
||||||
|
However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
|
||||||
|
restored after unsetting ``no_turbo``, unless these attributes have been written
|
||||||
|
to after ``no_turbo`` was set.
|
||||||
|
|
||||||
|
If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
|
||||||
|
and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
|
||||||
|
which also is the value of ``cpuinfo_max_freq`` in either case.
|
||||||
|
|
||||||
|
Next, the following policy attributes have special meaning if
|
||||||
|
``intel_pstate`` works in the `active mode <Active Mode_>`_:
|
||||||
|
|
||||||
|
``scaling_available_governors``
|
||||||
|
List of P-state selection algorithms provided by ``intel_pstate``.
|
||||||
|
|
||||||
|
``scaling_governor``
|
||||||
|
P-state selection algorithm provided by ``intel_pstate`` currently in
|
||||||
|
use with the given policy.
|
||||||
|
|
||||||
|
``scaling_cur_freq``
|
||||||
|
Frequency of the average P-state of the CPU represented by the given
|
||||||
|
policy for the time interval between the last two invocations of the
|
||||||
|
driver's utilization update callback by the CPU scheduler for that CPU.
|
||||||
|
|
||||||
|
The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
|
||||||
|
same as for other scaling drivers.
|
||||||
|
|
||||||
|
Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
|
||||||
|
depends on the operation mode of the driver. Namely, it is either
|
||||||
|
"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
|
||||||
|
`passive mode <Passive Mode_>`_).
|
||||||
|
|
||||||
|
Coordination of P-State Limits
|
||||||
|
------------------------------
|
||||||
|
|
||||||
|
``intel_pstate`` allows P-state limits to be set in two ways: with the help of
|
||||||
|
the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
|
||||||
|
<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
|
||||||
|
``CPUFreq`` policy attributes. The coordination between those limits is based
|
||||||
|
on the following rules, regardless of the current operation mode of the driver:
|
||||||
|
|
||||||
|
1. All CPUs are affected by the global limits (that is, none of them can be
|
||||||
|
requested to run faster than the global maximum and none of them can be
|
||||||
|
requested to run slower than the global minimum).
|
||||||
|
|
||||||
|
2. Each individual CPU is affected by its own per-policy limits (that is, it
|
||||||
|
cannot be requested to run faster than its own per-policy maximum and it
|
||||||
|
cannot be requested to run slower than its own per-policy minimum).
|
||||||
|
|
||||||
|
3. The global and per-policy limits can be set independently.
|
||||||
|
|
||||||
|
If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the
|
||||||
|
resulting effective values are written into its registers whenever the limits
|
||||||
|
change in order to request its internal P-state selection logic to always set
|
||||||
|
P-states within these limits. Otherwise, the limits are taken into account by
|
||||||
|
scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
|
||||||
|
every time before setting a new P-state for a CPU.
|
||||||
|
|
||||||
|
Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
|
||||||
|
is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
|
||||||
|
at all and the only way to set the limits is by using the policy attributes.
|
||||||
|
|
||||||
|
|
||||||
|
Energy vs Performance Hints
|
||||||
|
---------------------------
|
||||||
|
|
||||||
|
If ``intel_pstate`` works in the `active mode with the HWP feature enabled
|
||||||
|
<Active Mode With HWP_>`_ in the processor, additional attributes are present
|
||||||
|
in every ``CPUFreq`` policy directory in ``sysfs``. They are intended to allow
|
||||||
|
user space to help ``intel_pstate`` to adjust the processor's internal P-state
|
||||||
|
selection logic by focusing it on performance or on energy-efficiency, or
|
||||||
|
somewhere between the two extremes:
|
||||||
|
|
||||||
|
``energy_performance_preference``
|
||||||
|
Current value of the energy vs performance hint for the given policy
|
||||||
|
(or the CPU represented by it).
|
||||||
|
|
||||||
|
The hint can be changed by writing to this attribute.
|
||||||
|
|
||||||
|
``energy_performance_available_preferences``
|
||||||
|
List of strings that can be written to the
|
||||||
|
``energy_performance_preference`` attribute.
|
||||||
|
|
||||||
|
They represent different energy vs performance hints and should be
|
||||||
|
self-explanatory, except that ``default`` represents whatever hint
|
||||||
|
value was set by the platform firmware.
|
||||||
|
|
||||||
|
Strings written to the ``energy_performance_preference`` attribute are
|
||||||
|
internally translated to integer values written to the processor's
|
||||||
|
Energy-Performance Preference (EPP) knob (if supported) or its
|
||||||
|
Energy-Performance Bias (EPB) knob.
|
||||||
|
|
||||||
|
[Note that tasks may by migrated from one CPU to another by the scheduler's
|
||||||
|
load-balancing algorithm and if different energy vs performance hints are
|
||||||
|
set for those CPUs, that may lead to undesirable outcomes. To avoid such
|
||||||
|
issues it is better to set the same energy vs performance hint for all CPUs
|
||||||
|
or to pin every task potentially sensitive to them to a specific CPU.]
|
||||||
|
|
||||||
|
.. _acpi-cpufreq:
|
||||||
|
|
||||||
|
``intel_pstate`` vs ``acpi-cpufreq``
|
||||||
|
====================================
|
||||||
|
|
||||||
|
On the majority of systems supported by ``intel_pstate``, the ACPI tables
|
||||||
|
provided by the platform firmware contain ``_PSS`` objects returning information
|
||||||
|
that can be used for CPU performance scaling (refer to the `ACPI specification`_
|
||||||
|
for details on the ``_PSS`` objects and the format of the information returned
|
||||||
|
by them).
|
||||||
|
|
||||||
|
The information returned by the ACPI ``_PSS`` objects is used by the
|
||||||
|
``acpi-cpufreq`` scaling driver. On systems supported by ``intel_pstate``
|
||||||
|
the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
|
||||||
|
interface, but the set of P-states it can use is limited by the ``_PSS``
|
||||||
|
output.
|
||||||
|
|
||||||
|
On those systems each ``_PSS`` object returns a list of P-states supported by
|
||||||
|
the corresponding CPU which basically is a subset of the P-states range that can
|
||||||
|
be used by ``intel_pstate`` on the same system, with one exception: the whole
|
||||||
|
`turbo range <turbo_>`_ is represented by one item in it (the topmost one). By
|
||||||
|
convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
|
||||||
|
than the frequency of the highest non-turbo P-state listed by it, but the
|
||||||
|
corresponding P-state representation (following the hardware specification)
|
||||||
|
returned for it matches the maximum supported turbo P-state (or is the
|
||||||
|
special value 255 meaning essentially "go as high as you can get").
|
||||||
|
|
||||||
|
The list of P-states returned by ``_PSS`` is reflected by the table of
|
||||||
|
available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
|
||||||
|
scaling governors and the minimum and maximum supported frequencies reported by
|
||||||
|
it come from that list as well. In particular, given the special representation
|
||||||
|
of the turbo range described above, this means that the maximum supported
|
||||||
|
frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
|
||||||
|
of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
|
||||||
|
affects decisions made by the scaling governors, except for ``powersave`` and
|
||||||
|
``performance``.
|
||||||
|
|
||||||
|
For example, if a given governor attempts to select a frequency proportional to
|
||||||
|
estimated CPU load and maps the load of 100% to the maximum supported frequency
|
||||||
|
(possibly multiplied by a constant), then it will tend to choose P-states below
|
||||||
|
the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
|
||||||
|
in that case the turbo range corresponds to a small fraction of the frequency
|
||||||
|
band it can use (1 MHz vs 1 GHz or more). In consequence, it will only go to
|
||||||
|
the turbo range for the highest loads and the other loads above 50% that might
|
||||||
|
benefit from running at turbo frequencies will be given non-turbo P-states
|
||||||
|
instead.
|
||||||
|
|
||||||
|
One more issue related to that may appear on systems supporting the
|
||||||
|
`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
|
||||||
|
turbo threshold. Namely, if that is not coordinated with the lists of P-states
|
||||||
|
returned by ``_PSS`` properly, there may be more than one item corresponding to
|
||||||
|
a turbo P-state in those lists and there may be a problem with avoiding the
|
||||||
|
turbo range (if desirable or necessary). Usually, to avoid using turbo
|
||||||
|
P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
|
||||||
|
by ``_PSS``, but that is not sufficient when there are other turbo P-states in
|
||||||
|
the list returned by it.
|
||||||
|
|
||||||
|
Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
|
||||||
|
`passive mode <Passive Mode_>`_, except that the number of P-states it can set
|
||||||
|
is limited to the ones listed by the ACPI ``_PSS`` objects.
|
||||||
|
|
||||||
|
|
||||||
|
Kernel Command Line Options for ``intel_pstate``
|
||||||
|
================================================
|
||||||
|
|
||||||
|
Several kernel command line options can be used to pass early-configuration-time
|
||||||
|
parameters to ``intel_pstate`` in order to enforce specific behavior of it. All
|
||||||
|
of them have to be prepended with the ``intel_pstate=`` prefix.
|
||||||
|
|
||||||
|
``disable``
|
||||||
|
Do not register ``intel_pstate`` as the scaling driver even if the
|
||||||
|
processor is supported by it.
|
||||||
|
|
||||||
|
``passive``
|
||||||
|
Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
|
||||||
|
start with.
|
||||||
|
|
||||||
|
This option implies the ``no_hwp`` one described below.
|
||||||
|
|
||||||
|
``force``
|
||||||
|
Register ``intel_pstate`` as the scaling driver instead of
|
||||||
|
``acpi-cpufreq`` even if the latter is preferred on the given system.
|
||||||
|
|
||||||
|
This may prevent some platform features (such as thermal controls and
|
||||||
|
power capping) that rely on the availability of ACPI P-states
|
||||||
|
information from functioning as expected, so it should be used with
|
||||||
|
caution.
|
||||||
|
|
||||||
|
This option does not work with processors that are not supported by
|
||||||
|
``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
|
||||||
|
driver is used instead of ``acpi-cpufreq``.
|
||||||
|
|
||||||
|
``no_hwp``
|
||||||
|
Do not enable the `hardware-managed P-states (HWP) feature
|
||||||
|
<Active Mode With HWP_>`_ even if it is supported by the processor.
|
||||||
|
|
||||||
|
``hwp_only``
|
||||||
|
Register ``intel_pstate`` as the scaling driver only if the
|
||||||
|
`hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is
|
||||||
|
supported by the processor.
|
||||||
|
|
||||||
|
``support_acpi_ppc``
|
||||||
|
Take ACPI ``_PPC`` performance limits into account.
|
||||||
|
|
||||||
|
If the preferred power management profile in the FADT (Fixed ACPI
|
||||||
|
Description Table) is set to "Enterprise Server" or "Performance
|
||||||
|
Server", the ACPI ``_PPC`` limits are taken into account by default
|
||||||
|
and this option has no effect.
|
||||||
|
|
||||||
|
``per_cpu_perf_limits``
|
||||||
|
Use per-logical-CPU P-State limits (see `Coordination of P-state
|
||||||
|
Limits`_ for details).
|
||||||
|
|
||||||
|
|
||||||
|
Diagnostics and Tuning
|
||||||
|
======================
|
||||||
|
|
||||||
|
Trace Events
|
||||||
|
------------
|
||||||
|
|
||||||
|
There are two static trace events that can be used for ``intel_pstate``
|
||||||
|
diagnostics. One of them is the ``cpu_frequency`` trace event generally used
|
||||||
|
by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
|
||||||
|
to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if
|
||||||
|
it works in the `active mode <Active Mode_>`_.
|
||||||
|
|
||||||
|
The following sequence of shell commands can be used to enable them and see
|
||||||
|
their output (if the kernel is generally configured to support event tracing)::
|
||||||
|
|
||||||
|
# cd /sys/kernel/debug/tracing/
|
||||||
|
# echo 1 > events/power/pstate_sample/enable
|
||||||
|
# echo 1 > events/power/cpu_frequency/enable
|
||||||
|
# cat trace
|
||||||
|
gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
|
||||||
|
cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
|
||||||
|
|
||||||
|
If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
|
||||||
|
``cpu_frequency`` trace event will be triggered either by the ``schedutil``
|
||||||
|
scaling governor (for the policies it is attached to), or by the ``CPUFreq``
|
||||||
|
core (for the policies with other scaling governors).
|
||||||
|
|
||||||
|
``ftrace``
|
||||||
|
----------
|
||||||
|
|
||||||
|
The ``ftrace`` interface can be used for low-level diagnostics of
|
||||||
|
``intel_pstate``. For example, to check how often the function to set a
|
||||||
|
P-state is called, the ``ftrace`` filter can be set to to
|
||||||
|
:c:func:`intel_pstate_set_pstate`::
|
||||||
|
|
||||||
|
# cd /sys/kernel/debug/tracing/
|
||||||
|
# cat available_filter_functions | grep -i pstate
|
||||||
|
intel_pstate_set_pstate
|
||||||
|
intel_pstate_cpu_init
|
||||||
|
...
|
||||||
|
# echo intel_pstate_set_pstate > set_ftrace_filter
|
||||||
|
# echo function > current_tracer
|
||||||
|
# cat trace | head -15
|
||||||
|
# tracer: function
|
||||||
|
#
|
||||||
|
# entries-in-buffer/entries-written: 80/80 #P:4
|
||||||
|
#
|
||||||
|
# _-----=> irqs-off
|
||||||
|
# / _----=> need-resched
|
||||||
|
# | / _---=> hardirq/softirq
|
||||||
|
# || / _--=> preempt-depth
|
||||||
|
# ||| / delay
|
||||||
|
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
|
||||||
|
# | | | |||| | |
|
||||||
|
Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
|
||||||
|
gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
|
||||||
|
gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
|
||||||
|
<idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
|
||||||
|
|
||||||
|
Tuning Interface in ``debugfs``
|
||||||
|
-------------------------------
|
||||||
|
|
||||||
|
The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of
|
||||||
|
processors in the active mode <powersave_>`_ is based on a `PID controller`_
|
||||||
|
whose parameters were chosen to address a number of different use cases at the
|
||||||
|
same time. However, it still is possible to fine-tune it to a specific workload
|
||||||
|
and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is
|
||||||
|
provided for this purpose. [Note that the ``pstate_snb`` directory will be
|
||||||
|
present only if the specific P-state selection algorithm matching the interface
|
||||||
|
in it actually is in use.]
|
||||||
|
|
||||||
|
The following files present in that directory can be used to modify the PID
|
||||||
|
controller parameters at run time:
|
||||||
|
|
||||||
|
| ``deadband``
|
||||||
|
| ``d_gain_pct``
|
||||||
|
| ``i_gain_pct``
|
||||||
|
| ``p_gain_pct``
|
||||||
|
| ``sample_rate_ms``
|
||||||
|
| ``setpoint``
|
||||||
|
|
||||||
|
Note, however, that achieving desirable results this way generally requires
|
||||||
|
expert-level understanding of the power vs performance tradeoff, so extra care
|
||||||
|
is recommended when attempting to do that.
|
||||||
|
|
||||||
|
|
||||||
|
.. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
|
||||||
|
.. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
|
||||||
|
.. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
|
||||||
|
.. _PID controller: https://en.wikipedia.org/wiki/PID_controller
|
||||||
|
|
@ -1,281 +0,0 @@
|
||||||
Intel P-State driver
|
|
||||||
--------------------
|
|
||||||
|
|
||||||
This driver provides an interface to control the P-State selection for the
|
|
||||||
SandyBridge+ Intel processors.
|
|
||||||
|
|
||||||
The following document explains P-States:
|
|
||||||
http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
|
|
||||||
As stated in the document, P-State doesn’t exactly mean a frequency. However, for
|
|
||||||
the sake of the relationship with cpufreq, P-State and frequency are used
|
|
||||||
interchangeably.
|
|
||||||
|
|
||||||
Understanding the cpufreq core governors and policies are important before
|
|
||||||
discussing more details about the Intel P-State driver. Based on what callbacks
|
|
||||||
a cpufreq driver provides to the cpufreq core, it can support two types of
|
|
||||||
drivers:
|
|
||||||
- with target_index() callback: In this mode, the drivers using cpufreq core
|
|
||||||
simply provide the minimum and maximum frequency limits and an additional
|
|
||||||
interface target_index() to set the current frequency. The cpufreq subsystem
|
|
||||||
has a number of scaling governors ("performance", "powersave", "ondemand",
|
|
||||||
etc.). Depending on which governor is in use, cpufreq core will call for
|
|
||||||
transitions to a specific frequency using target_index() callback.
|
|
||||||
- setpolicy() callback: In this mode, drivers do not provide target_index()
|
|
||||||
callback, so cpufreq core can't request a transition to a specific frequency.
|
|
||||||
The driver provides minimum and maximum frequency limits and callbacks to set a
|
|
||||||
policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
|
|
||||||
The cpufreq core can request the driver to operate in any of the two policies:
|
|
||||||
"performance" and "powersave". The driver decides which frequency to use based
|
|
||||||
on the above policy selection considering minimum and maximum frequency limits.
|
|
||||||
|
|
||||||
The Intel P-State driver falls under the latter category, which implements the
|
|
||||||
setpolicy() callback. This driver decides what P-State to use based on the
|
|
||||||
requested policy from the cpufreq core. If the processor is capable of
|
|
||||||
selecting its next P-State internally, then the driver will offload this
|
|
||||||
responsibility to the processor (aka HWP: Hardware P-States). If not, the
|
|
||||||
driver implements algorithms to select the next P-State.
|
|
||||||
|
|
||||||
Since these policies are implemented in the driver, they are not same as the
|
|
||||||
cpufreq scaling governors implementation, even if they have the same name in
|
|
||||||
the cpufreq sysfs (scaling_governors). For example the "performance" policy is
|
|
||||||
similar to cpufreq’s "performance" governor, but "powersave" is completely
|
|
||||||
different than the cpufreq "powersave" governor. The strategy here is similar
|
|
||||||
to cpufreq "ondemand", where the requested P-State is related to the system load.
|
|
||||||
|
|
||||||
Sysfs Interface
|
|
||||||
|
|
||||||
In addition to the frequency-controlling interfaces provided by the cpufreq
|
|
||||||
core, the driver provides its own sysfs files to control the P-State selection.
|
|
||||||
These files have been added to /sys/devices/system/cpu/intel_pstate/.
|
|
||||||
Any changes made to these files are applicable to all CPUs (even in a
|
|
||||||
multi-package system, Refer to later section on placing "Per-CPU limits").
|
|
||||||
|
|
||||||
max_perf_pct: Limits the maximum P-State that will be requested by
|
|
||||||
the driver. It states it as a percentage of the available performance. The
|
|
||||||
available (P-State) performance may be reduced by the no_turbo
|
|
||||||
setting described below.
|
|
||||||
|
|
||||||
min_perf_pct: Limits the minimum P-State that will be requested by
|
|
||||||
the driver. It states it as a percentage of the max (non-turbo)
|
|
||||||
performance level.
|
|
||||||
|
|
||||||
no_turbo: Limits the driver to selecting P-State below the turbo
|
|
||||||
frequency range.
|
|
||||||
|
|
||||||
turbo_pct: Displays the percentage of the total performance that
|
|
||||||
is supported by hardware that is in the turbo range. This number
|
|
||||||
is independent of whether turbo has been disabled or not.
|
|
||||||
|
|
||||||
num_pstates: Displays the number of P-States that are supported
|
|
||||||
by hardware. This number is independent of whether turbo has
|
|
||||||
been disabled or not.
|
|
||||||
|
|
||||||
For example, if a system has these parameters:
|
|
||||||
Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
|
|
||||||
Max non turbo ratio: 0x17
|
|
||||||
Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
|
|
||||||
|
|
||||||
Sysfs will show :
|
|
||||||
max_perf_pct:100, which corresponds to 1 core ratio
|
|
||||||
min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
|
|
||||||
no_turbo:0, turbo is not disabled
|
|
||||||
num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
|
|
||||||
turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
|
|
||||||
|
|
||||||
Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
|
|
||||||
Volume 3: System Programming Guide" to understand ratios.
|
|
||||||
|
|
||||||
There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/
|
|
||||||
that can be used for controlling the operation mode of the driver:
|
|
||||||
|
|
||||||
status: Three settings are possible:
|
|
||||||
"off" - The driver is not in use at this time.
|
|
||||||
"active" - The driver works as a P-state governor (default).
|
|
||||||
"passive" - The driver works as a regular cpufreq one and collaborates
|
|
||||||
with the generic cpufreq governors (it sets P-states as
|
|
||||||
requested by those governors).
|
|
||||||
The current setting is returned by reads from this attribute. Writing one
|
|
||||||
of the above strings to it changes the operation mode as indicated by that
|
|
||||||
string, if possible. If HW-managed P-states (HWP) are enabled, it is not
|
|
||||||
possible to change the driver's operation mode and attempts to write to
|
|
||||||
this attribute will fail.
|
|
||||||
|
|
||||||
cpufreq sysfs for Intel P-State
|
|
||||||
|
|
||||||
Since this driver registers with cpufreq, cpufreq sysfs is also presented.
|
|
||||||
There are some important differences, which need to be considered.
|
|
||||||
|
|
||||||
scaling_cur_freq: This displays the real frequency which was used during
|
|
||||||
the last sample period instead of what is requested. Some other cpufreq driver,
|
|
||||||
like acpi-cpufreq, displays what is requested (Some changes are on the
|
|
||||||
way to fix this for acpi-cpufreq driver). The same is true for frequencies
|
|
||||||
displayed at /proc/cpuinfo.
|
|
||||||
|
|
||||||
scaling_governor: This displays current active policy. Since each CPU has a
|
|
||||||
cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
|
|
||||||
is not possible with Intel P-States, as there is one common policy for all
|
|
||||||
CPUs. Here, the last requested policy will be applicable to all CPUs. It is
|
|
||||||
suggested that one use the cpupower utility to change policy to all CPUs at the
|
|
||||||
same time.
|
|
||||||
|
|
||||||
scaling_setspeed: This attribute can never be used with Intel P-State.
|
|
||||||
|
|
||||||
scaling_max_freq/scaling_min_freq: This interface can be used similarly to
|
|
||||||
the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
|
|
||||||
are converted to nearest possible P-State, this is prone to rounding errors.
|
|
||||||
This method is not preferred to limit performance.
|
|
||||||
|
|
||||||
affected_cpus: Not used
|
|
||||||
related_cpus: Not used
|
|
||||||
|
|
||||||
For contemporary Intel processors, the frequency is controlled by the
|
|
||||||
processor itself and the P-State exposed to software is related to
|
|
||||||
performance levels. The idea that frequency can be set to a single
|
|
||||||
frequency is fictional for Intel Core processors. Even if the scaling
|
|
||||||
driver selects a single P-State, the actual frequency the processor
|
|
||||||
will run at is selected by the processor itself.
|
|
||||||
|
|
||||||
Per-CPU limits
|
|
||||||
|
|
||||||
The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
|
|
||||||
the intel_pstate driver to use per-CPU performance limits. When it is set,
|
|
||||||
the sysfs control interface described above is subject to limitations.
|
|
||||||
- The following controls are not available for both read and write
|
|
||||||
/sys/devices/system/cpu/intel_pstate/max_perf_pct
|
|
||||||
/sys/devices/system/cpu/intel_pstate/min_perf_pct
|
|
||||||
- The following controls can be used to set performance limits, as far as the
|
|
||||||
architecture of the processor permits:
|
|
||||||
/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
|
|
||||||
/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
|
|
||||||
/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
|
|
||||||
- User can still observe turbo percent and number of P-States from
|
|
||||||
/sys/devices/system/cpu/intel_pstate/turbo_pct
|
|
||||||
/sys/devices/system/cpu/intel_pstate/num_pstates
|
|
||||||
- User can read write system wide turbo status
|
|
||||||
/sys/devices/system/cpu/no_turbo
|
|
||||||
|
|
||||||
Support of energy performance hints
|
|
||||||
It is possible to provide hints to the HWP algorithms in the processor
|
|
||||||
to be more performance centric to more energy centric. When the driver
|
|
||||||
is using HWP, two additional cpufreq sysfs attributes are presented for
|
|
||||||
each logical CPU.
|
|
||||||
These attributes are:
|
|
||||||
- energy_performance_available_preferences
|
|
||||||
- energy_performance_preference
|
|
||||||
|
|
||||||
To get list of supported hints:
|
|
||||||
$ cat energy_performance_available_preferences
|
|
||||||
default performance balance_performance balance_power power
|
|
||||||
|
|
||||||
The current preference can be read or changed via cpufreq sysfs
|
|
||||||
attribute "energy_performance_preference". Reading from this attribute
|
|
||||||
will display current effective setting. User can write any of the valid
|
|
||||||
preference string to this attribute. User can always restore to power-on
|
|
||||||
default by writing "default".
|
|
||||||
|
|
||||||
Since threads can migrate to different CPUs, this is possible that the
|
|
||||||
new CPU may have different energy performance preference than the previous
|
|
||||||
one. To avoid such issues, either threads can be pinned to specific CPUs
|
|
||||||
or set the same energy performance preference value to all CPUs.
|
|
||||||
|
|
||||||
Tuning Intel P-State driver
|
|
||||||
|
|
||||||
When the performance can be tuned using PID (Proportional Integral
|
|
||||||
Derivative) controller, debugfs files are provided for adjusting performance.
|
|
||||||
They are presented under:
|
|
||||||
/sys/kernel/debug/pstate_snb/
|
|
||||||
|
|
||||||
The PID tunable parameters are:
|
|
||||||
deadband
|
|
||||||
d_gain_pct
|
|
||||||
i_gain_pct
|
|
||||||
p_gain_pct
|
|
||||||
sample_rate_ms
|
|
||||||
setpoint
|
|
||||||
|
|
||||||
To adjust these parameters, some understanding of driver implementation is
|
|
||||||
necessary. There are some tweeks described here, but be very careful. Adjusting
|
|
||||||
them requires expert level understanding of power and performance relationship.
|
|
||||||
These limits are only useful when the "powersave" policy is active.
|
|
||||||
|
|
||||||
-To make the system more responsive to load changes, sample_rate_ms can
|
|
||||||
be adjusted (current default is 10ms).
|
|
||||||
-To make the system use higher performance, even if the load is lower, setpoint
|
|
||||||
can be adjusted to a lower number. This will also lead to faster ramp up time
|
|
||||||
to reach the maximum P-State.
|
|
||||||
If there are no derivative and integral coefficients, The next P-State will be
|
|
||||||
equal to:
|
|
||||||
current P-State - ((setpoint - current cpu load) * p_gain_pct)
|
|
||||||
|
|
||||||
For example, if the current PID parameters are (Which are defaults for the core
|
|
||||||
processors like SandyBridge):
|
|
||||||
deadband = 0
|
|
||||||
d_gain_pct = 0
|
|
||||||
i_gain_pct = 0
|
|
||||||
p_gain_pct = 20
|
|
||||||
sample_rate_ms = 10
|
|
||||||
setpoint = 97
|
|
||||||
|
|
||||||
If the current P-State = 0x08 and current load = 100, this will result in the
|
|
||||||
next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
|
|
||||||
goes up by only 1. If during next sample interval the current load doesn't
|
|
||||||
change and still 100, then P-State goes up by one again. This process will
|
|
||||||
continue as long as the load is more than the setpoint until the maximum P-State
|
|
||||||
is reached.
|
|
||||||
|
|
||||||
For the same load at setpoint = 60, this will result in the next P-State
|
|
||||||
= 0x08 - ((60 - 100) * 0.2) = 16
|
|
||||||
So by changing the setpoint from 97 to 60, there is an increase of the
|
|
||||||
next P-State from 9 to 16. So this will make processor execute at higher
|
|
||||||
P-State for the same CPU load. If the load continues to be more than the
|
|
||||||
setpoint during next sample intervals, then P-State will go up again till the
|
|
||||||
maximum P-State is reached. But the ramp up time to reach the maximum P-State
|
|
||||||
will be much faster when the setpoint is 60 compared to 97.
|
|
||||||
|
|
||||||
Debugging Intel P-State driver
|
|
||||||
|
|
||||||
Event tracing
|
|
||||||
To debug P-State transition, the Linux event tracing interface can be used.
|
|
||||||
There are two specific events, which can be enabled (Provided the kernel
|
|
||||||
configs related to event tracing are enabled).
|
|
||||||
|
|
||||||
# cd /sys/kernel/debug/tracing/
|
|
||||||
# echo 1 > events/power/pstate_sample/enable
|
|
||||||
# echo 1 > events/power/cpu_frequency/enable
|
|
||||||
# cat trace
|
|
||||||
gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
|
|
||||||
scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
|
|
||||||
freq=2474476
|
|
||||||
cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
|
|
||||||
|
|
||||||
|
|
||||||
Using ftrace
|
|
||||||
|
|
||||||
If function level tracing is required, the Linux ftrace interface can be used.
|
|
||||||
For example if we want to check how often a function to set a P-State is
|
|
||||||
called, we can set ftrace filter to intel_pstate_set_pstate.
|
|
||||||
|
|
||||||
# cd /sys/kernel/debug/tracing/
|
|
||||||
# cat available_filter_functions | grep -i pstate
|
|
||||||
intel_pstate_set_pstate
|
|
||||||
intel_pstate_cpu_init
|
|
||||||
...
|
|
||||||
|
|
||||||
# echo intel_pstate_set_pstate > set_ftrace_filter
|
|
||||||
# echo function > current_tracer
|
|
||||||
# cat trace | head -15
|
|
||||||
# tracer: function
|
|
||||||
#
|
|
||||||
# entries-in-buffer/entries-written: 80/80 #P:4
|
|
||||||
#
|
|
||||||
# _-----=> irqs-off
|
|
||||||
# / _----=> need-resched
|
|
||||||
# | / _---=> hardirq/softirq
|
|
||||||
# || / _--=> preempt-depth
|
|
||||||
# ||| / delay
|
|
||||||
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
|
|
||||||
# | | | |||| | |
|
|
||||||
Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
|
|
||||||
gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
|
|
||||||
gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
|
|
||||||
<idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
|
|
||||||
Loading…
Reference in a new issue