drm/panel: Add Visionox G2647FB105 panel driver

Add the driver for Visionox G2647FB105 6.47" FHD Plus CMD mode AMOLED panel
support found in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250414172637.197792-3-sanyapilot496@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250414172637.197792-3-sanyapilot496@gmail.com

drivers/gpu/drm/panel/Kconfig

@@ -1007,6 +1007,15 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_G2647FB105
+	tristate "Visionox G2647FB105"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Visionox
+	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
+
 config DRM_PANEL_VISIONOX_R66451
 	tristate "Visionox R66451"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -102,6 +102,7 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_G2647FB105) += panel-visionox-g2647fb105.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM692E5) += panel-visionox-rm692e5.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o

drivers/gpu/drm/panel/panel-visionox-g2647fb105.c

@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ *   Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *   Copyright (c) 2025, Alexander Baransky <sanyapilot496@gmail.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct visionox_g2647fb105 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data *supplies;
+};
+
+static const struct regulator_bulk_data visionox_g2647fb105_supplies[] = {
+	{ .supply = "vdd3p3" },
+	{ .supply = "vddio" },
+	{ .supply = "vsn" },
+	{ .supply = "vsp" },
+};
+
+static inline
+struct visionox_g2647fb105 *to_visionox_g2647fb105(struct drm_panel *panel)
+{
+	return container_of(panel, struct visionox_g2647fb105, panel);
+}
+
+static void visionox_g2647fb105_reset(struct visionox_g2647fb105 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int visionox_g2647fb105_on(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4d, 0x32);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbe, 0x17);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbf, 0xbb);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0xdd);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1, 0xff);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0xd0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x24);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x03);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x08);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+
+	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x0000);
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 100);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_off(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_prepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	visionox_g2647fb105_reset(ctx);
+
+	ret = visionox_g2647fb105_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int visionox_g2647fb105_unprepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = visionox_g2647fb105_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(visionox_g2647fb105_supplies), ctx->supplies);
+
+	return 0;
+}
+
+static const struct drm_display_mode visionox_g2647fb105_mode = {
+	.clock = (1080 + 28 + 4 + 36) * (2340 + 8 + 4 + 4) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 4,
+	.htotal = 1080 + 28 + 4 + 36,
+	.vdisplay = 2340,
+	.vsync_start = 2340 + 8,
+	.vsync_end = 2340 + 8 + 4,
+	.vtotal = 2340 + 8 + 4 + 4,
+	.width_mm = 69,
+	.height_mm = 149,
+};
+
+static int visionox_g2647fb105_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &visionox_g2647fb105_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs visionox_g2647fb105_panel_funcs = {
+	.prepare = visionox_g2647fb105_prepare,
+	.unprepare = visionox_g2647fb105_unprepare,
+	.get_modes = visionox_g2647fb105_get_modes,
+};
+
+static int visionox_g2647fb105_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct backlight_ops visionox_g2647fb105_bl_ops = {
+	.update_status = visionox_g2647fb105_bl_update_status,
+};
+
+static struct backlight_device *
+visionox_g2647fb105_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 1023,
+		.max_brightness = 2047,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &visionox_g2647fb105_bl_ops, &props);
+}
+
+static int visionox_g2647fb105_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct visionox_g2647fb105 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ret = devm_regulator_bulk_get_const(dev,
+					    ARRAY_SIZE(visionox_g2647fb105_supplies),
+					    visionox_g2647fb105_supplies,
+					    &ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
+
+	ctx->panel.prepare_prev_first = true;
+
+	drm_panel_init(&ctx->panel, dev, &visionox_g2647fb105_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = visionox_g2647fb105_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = devm_mipi_dsi_attach(dev, dsi);
+	if (ret < 0) {
+		drm_panel_remove(&ctx->panel);
+		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+	}
+
+	return 0;
+}
+
+static void visionox_g2647fb105_remove(struct mipi_dsi_device *dsi)
+{
+	struct visionox_g2647fb105 *ctx = mipi_dsi_get_drvdata(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id visionox_g2647fb105_of_match[] = {
+	{ .compatible = "visionox,g2647fb105" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, visionox_g2647fb105_of_match);
+
+static struct mipi_dsi_driver visionox_g2647fb105_driver = {
+	.probe = visionox_g2647fb105_probe,
+	.remove = visionox_g2647fb105_remove,
+	.driver = {
+		.name = "panel-visionox-g2647fb105",
+		.of_match_table = visionox_g2647fb105_of_match,
+	},
+};
+module_mipi_dsi_driver(visionox_g2647fb105_driver);
+
+MODULE_AUTHOR("Alexander Baransky <sanyapilot496@gmail.com>");
+MODULE_DESCRIPTION("DRM driver for Visionox G2647FB105 AMOLED DSI panel");
+MODULE_LICENSE("GPL");