ARM: arm-soc non-critical fixes for 3.10

Here is a collection of fixes (and some intermixed cleanups) that were
 considered less important and thus not included in the later parts of
 the 3.9-rc cycle.
 
 It's a bit all over the map, contents wise. A series of ux500 fixes
 and cleanups, a bunch of various fixes for OMAP and tegra, and some for
 Freescale i.MX and even Qualcomm MSM.
 
 Note that there's also a patch on this branch to globally turn off
 -Wmaybe-uninitialized when building with -Os. It's been posted several
 times by Arnd and no dissent was raised, but nobody seemed interested
 to pick it up. So here it is, as the topmost patch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggtQAAoJEIwa5zzehBx3TmYP/i4Kt3JDYEbYyAqNsH3nb0mN
 3kLwViUxDdS/aZCXEaNYLwZBUgl1Zyz3oRd39zFCo4dRM2uG1AW+lC73AP3/eW6n
 2oHxI43xzwjDNPxRkiipB4NXPyIoIdbRXM6/QIxXzM9zD3MJXj7BpBBpDgGAsLov
 BQ2r28idxZE6jB4puPjVZCuyG5UMjA0Ko2Fp2em7QXarQBBscDvhAtjqNZ3JPtlN
 thASsou1B8805J7jf5G8Wz6fNeVJg2wlWMgE9ywJpKFbut4cGM4riS/QvB0fTe6d
 tmkCae0bw3UD+D+N1gYcZpeGve8oPSHbeyhrSPAfI/wAVBh0J397MgJW5/f0vW8p
 DffLjQI+S450Kw0Bab41Tn0JnMnXtYUo56yjemdxa/NQJF34ycBFQ3HOm6nFxo7U
 6tce2O775uvG0+rJfDbX6M+Mu7QoIi0p8sOdg0/W+pFK08xvaezsOc1NjqTvuYoC
 s/2LYiIJqVG6tFVU0i/46duQhdp0I/Oj7wXtFXH0ZvZPBz0cDaSU3irB3QA9pNt5
 PI6JEBg0FUPUork24gShSUf7un4Itrjlq20HTkC9/z1skx87PbB3Wa7A8jnHeFme
 tpuPRvmfBWhIhp06AIA8znhDik9xuJ4B7ypsFNM0VyoV/qx+TSIHbViVQuwcOf9b
 nAidtuhMjE+P2sAu+VGU
 =bzsu
 -----END PGP SIGNATURE-----

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "Here is a collection of fixes (and some intermixed cleanups) that were
  considered less important and thus not included in the later parts of
  the 3.9-rc cycle.

  It's a bit all over the map, contents wise.  A series of ux500 fixes
  and cleanups, a bunch of various fixes for OMAP and tegra, and some
  for Freescale i.MX and even Qualcomm MSM.

  Note that there's also a patch on this branch to globally turn off
  -Wmaybe-uninitialized when building with -Os.  It's been posted
  several times by Arnd and no dissent was raised, but nobody seemed
  interested to pick it up.  So here it is, as the topmost patch."

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  Turn off -Wmaybe-uninitialized when building with -Os
  ARM: orion5x: include linux/cpu.h
  ARM: tegra: call cpu_do_idle from C code
  ARM: u300: fix ages old copy/paste bug
  ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
  ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
  ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
  ARM: tegra: fix build error when THUMB2_KERNEL enabled
  ARM: msm: Fix uncompess.h tx underrun check
  ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
  ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: mach-imx: mach-imx6q: Fix sparse warnings
  ARM: mach-imx: src: Include "common.h
  ARM: mach-imx: gpc: Include "common.h"
  ARM: mach-imx: avic: Staticize *avic_base
  ARM: mach-imx: tzic: Staticize *tzic_base
  ARM: mach-imx: clk: Include "clk.h"
  ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
  ...

Makefile

@@ -571,7 +571,7 @@ endif # $(dot-config)
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
 else
 KBUILD_CFLAGS	+= -O2
 endif

arch/arm/boot/dts/dbx5x0.dtsi

@@ -191,7 +191,7 @@ dma-controller@801C0000 {
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
@@ -674,10 +674,13 @@ vmmci: regulator-gpio {
 			compatible = "regulator-gpio";
 
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2600000>;
+			regulator-max-microvolt = <2900000>;
 			regulator-name = "mmci-reg";
 			regulator-type = "voltage";
 
+			startup-delay-us = <100>;
+			enable-active-high;
+
 			states = <1800000 0x1
 				  2900000 0x0>;
 

arch/arm/boot/dts/href.dtsi

@@ -87,6 +87,7 @@ sdi0_per1@80126000 {
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
 
 			cd-gpios  = <&tc3589x_gpio 3 0x4>;
 

arch/arm/boot/dts/hrefprev60.dts

@@ -25,6 +25,14 @@ button@1 {
 	};
 
 	soc-u9500 {
+		prcmu@80157000 {
+			ab8500@5 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+			};
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
@@ -40,7 +48,7 @@ bu21013_tp@0x5c {
 
 		vmmci: regulator-gpio {
 			gpios = <&tc3589x_gpio 18 0x4>;
-			gpio-enable = <&tc3589x_gpio 17 0x4>;
+			enable-gpio = <&tc3589x_gpio 17 0x4>;
 
 			status = "okay";
 		};

arch/arm/boot/dts/snowball.dts

@@ -299,6 +299,10 @@ db8500_esram34_ret_reg: db8500_esram34_ret {
 			};
 
 			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";

arch/arm/boot/dts/stuib.dtsi

@@ -15,7 +15,7 @@ i2c@80004000 {
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x1>;
+				interrupts = <26 0x2>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;
 

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -444,7 +444,7 @@ usb@c5004000 {
 	};
 
 	sdhci@c8000600 {
-		cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+		cd-gpios = <&gpio 23 1>; /* gpio PC7 */
 	};
 
 	sound {

arch/arm/boot/dts/tegra20-harmony.dts

@@ -437,7 +437,7 @@ usb-phy@c5004400 {
 
 	sdhci@c8000200 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 		bus-width = <4>;
@@ -445,7 +445,7 @@ sdhci@c8000200 {
 
 	sdhci@c8000600 {
 		status = "okay";
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <8>;

arch/arm/boot/dts/tegra20-paz00.dts

@@ -436,7 +436,7 @@ usb-phy@c5004400 {
 
 	sdhci@c8000000 {
 		status = "okay";
-		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
 		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 		bus-width = <4>;

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -584,7 +584,7 @@ sdhci@c8000000 {
 
 	sdhci@c8000400 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <4>;

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -465,7 +465,7 @@ usb@c5008000 {
 	};
 
 	sdhci@c8000600 {
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		bus-width = <4>;
 		status = "okay";

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -325,7 +325,7 @@ sdhci@c8000000 {
 
 	sdhci@c8000600 {
 		status = "okay";
-		cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+		cd-gpios = <&gpio 121 1>; /* gpio PP1 */
 		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
 		bus-width = <4>;
 	};

arch/arm/boot/dts/tegra20-ventana.dts

@@ -520,7 +520,7 @@ sdhci@c8000000 {
 
 	sdhci@c8000400 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <4>;

arch/arm/boot/dts/tegra20-whistler.dts

@@ -510,6 +510,7 @@ usb@c5008000 {
 
 	sdhci@c8000400 {
 		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
 		bus-width = <8>;
 	};

arch/arm/boot/dts/tegra30-beaver.dts

@@ -257,7 +257,7 @@ pmc {
 
 	sdhci@78000000 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
 		power-gpios = <&gpio 31 0>; /* gpio PD7 */
 		bus-width = <4>;

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -311,7 +311,7 @@ pmc {
 
 	sdhci@78000000 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
 		power-gpios = <&gpio 31 0>; /* gpio PD7 */
 		bus-width = <4>;

arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts

@@ -117,7 +117,7 @@ timer {
 	};
 
 	pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -134,7 +134,7 @@ timer {
 	};
 
 	pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

arch/arm/boot/dts/vexpress-v2p-ca5s.dts

@@ -111,7 +111,7 @@ L2: cache-controller@2c0f0000 {
 	};
 
 	pmu {
-		compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a5-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

arch/arm/mach-cns3xxx/core.c

@@ -31,16 +31,6 @@ static struct map_desc cns3xxx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_MISC_BASE_VIRT,
 		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -20,22 +20,16 @@
 #define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
 
 #define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-#define CNS3XXX_SWITCH_BASE_VIRT		0xFFF00000
 
 #define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-#define CNS3XXX_PPE_BASE_VIRT			0xFFF50000
 
 #define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT		0xFFF60000
 
 #define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-#define CNS3XXX_SSP_BASE_VIRT			0xFFF01000
 
 #define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-#define CNS3XXX_DMC_BASE_VIRT			0xFFF02000
 
 #define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-#define CNS3XXX_SMC_BASE_VIRT			0xFFF03000
 
 #define SMC_MEMC_STATUS_OFFSET			0x000
 #define SMC_MEMIF_CFG_OFFSET			0x004
@@ -74,13 +68,10 @@
 #define SMC_PCELL_ID_3_OFFSET			0xFFC
 
 #define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-#define CNS3XXX_GPIOA_BASE_VIRT			0xFFF04000
 
 #define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-#define CNS3XXX_GPIOB_BASE_VIRT			0xFFF05000
 
 #define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-#define CNS3XXX_RTC_BASE_VIRT			0xFFF06000
 
 #define RTC_SEC_OFFSET				0x00
 #define RTC_MIN_OFFSET				0x04
@@ -112,22 +103,16 @@
 #define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-#define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
 
 #define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-#define CNS3XXX_UART2_BASE_VIRT			0xFFF0B000
 
 #define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-#define CNS3XXX_DMAC_BASE_VIRT			0xFFF0D000
 
 #define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-#define CNS3XXX_CORESIGHT_BASE_VIRT		0xFFF0E000
 
 #define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-#define CNS3XXX_CRYPTO_BASE_VIRT		0xFFF0F000
 
 #define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-#define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
 #define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
@@ -150,42 +135,31 @@
 #define TIMER_FREERUN_CONTROL_OFFSET		0x44
 
 #define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-#define CNS3XXX_HCIE_BASE_VIRT			0xFFF30000
 
 #define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-#define CNS3XXX_RAID_BASE_VIRT			0xFFF12000
 
 #define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-#define CNS3XXX_AXI_IXC_BASE_VIRT		0xFFF13000
 
 #define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-#define CNS3XXX_CLCD_BASE_VIRT			0xFFF14000
 
 #define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-#define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
 
 #define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
 
 #define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
 #define CNS3XXX_SATA2_SIZE			SZ_16M
-#define CNS3XXX_SATA2_BASE_VIRT			0xFFF17000
 
 #define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-#define CNS3XXX_CAMERA_BASE_VIRT		0xFFF18000
 
 #define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-#define CNS3XXX_SDIO_BASE_VIRT			0xFFF19000
 
 #define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-#define CNS3XXX_I2S_TDM_BASE_VIRT		0xFFF1A000
 
 #define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-#define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
 
 #define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
 
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-#define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
 
 #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
 #define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
@@ -239,7 +213,6 @@
 #define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
 
 /*
  * Misc block

arch/arm/mach-imx/avic.c

@@ -51,7 +51,7 @@
 
 #define AVIC_NUM_IRQS 64
 
-void __iomem *avic_base;
+static void __iomem *avic_base;
 static struct irq_domain *domain;
 
 static u32 avic_saved_mask_reg[2];

arch/arm/mach-imx/clk-busy.c

@@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
 	return ret;
 }
 
-struct clk_ops clk_busy_mux_ops = {
+static struct clk_ops clk_busy_mux_ops = {
 	.get_parent = clk_busy_mux_get_parent,
 	.set_parent = clk_busy_mux_set_parent,
 };

arch/arm/mach-imx/clk-gate2.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include "clk.h"
 
 /**
  * DOC: basic gatable clock which can gate and ungate it's ouput

arch/arm/mach-imx/clk-pllv1.c

@@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
 	return ll;
 }
 
-struct clk_ops clk_pllv1_ops = {
+static struct clk_ops clk_pllv1_ops = {
 	.recalc_rate = clk_pllv1_recalc_rate,
 };
 

arch/arm/mach-imx/clk-pllv2.c

@@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw)
 	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 }
 
-struct clk_ops clk_pllv2_ops = {
+static struct clk_ops clk_pllv2_ops = {
 	.prepare = clk_pllv2_prepare,
 	.unprepare = clk_pllv2_unprepare,
 	.recalc_rate = clk_pllv2_recalc_rate,

arch/arm/mach-imx/clk.c

@@ -1,3 +1,4 @@
 #include <linux/spinlock.h>
+#include "clk.h"
 
 DEFINE_SPINLOCK(imx_ccm_lock);

arch/arm/mach-imx/cpu-imx5.c

@@ -18,6 +18,7 @@
 #include <linux/io.h>
 
 #include "hardware.h"
+#include "common.h"
 
 static int mx5_cpu_rev = -1;
 

arch/arm/mach-imx/cpu.c

@@ -3,6 +3,7 @@
 #include <linux/io.h>
 
 #include "hardware.h"
+#include "common.h"
 
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = {
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
 	/* UART4 */
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
@@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 
 	imx27_add_imx_uart1(&uart_pdata);
 	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	imx27_add_imx_uart3(&uart_pdata);
 #endif
 

arch/arm/mach-imx/gpc.c

@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/irqchip/arm-gic.h>
+#include "common.h"
 
 #define GPC_IMR1		0x008
 #define GPC_PGC_CPU_PDN		0x2a0

arch/arm/mach-imx/iomux-imx31.c

@@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock);
 
 #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
 
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
 /*
  * set the mode for a IOMUX pin.
  */

arch/arm/mach-imx/irq-common.c

@@ -21,25 +21,6 @@
 
 #include "irq-common.h"
 
-int imx_irq_set_priority(unsigned char irq, unsigned char prio)
-{
-	struct irq_chip_generic *gc;
-	struct mxc_extra_irq *exirq;
-	int ret;
-
-	ret = -ENOSYS;
-
-	gc = irq_get_chip_data(irq);
-	if (gc && gc->private) {
-		exirq = gc->private;
-		if (exirq->set_priority)
-			ret = exirq->set_priority(irq, prio);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(imx_irq_set_priority);
-
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 {
 	struct irq_chip_generic *gc;

arch/arm/mach-imx/mach-cpuimx27.c

@@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = {
 	PE14_PF_UART1_CTS,
 	PE15_PF_UART1_RTS,
 	/* UART4 */
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
@@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void)
 	/* SDHC2 can be used for Wifi */
 	imx27_add_mxc_mmc(1, NULL);
 #endif
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
 	imx27_add_imx_uart3(&uart_pdata);
 #endif

arch/arm/mach-imx/mach-imx6q.c

@@ -73,7 +73,7 @@ static int imx6q_revision(void)
 	}
 }
 
-void imx6q_restart(char mode, const char *cmd)
+static void imx6q_restart(char mode, const char *cmd)
 {
 	struct device_node *np;
 	void __iomem *wdog_base;
@@ -256,7 +256,7 @@ static void __init imx6q_opp_init(struct device *cpu_dev)
 	of_node_put(np);
 }
 
-struct platform_device imx6q_cpufreq_pdev = {
+static struct platform_device imx6q_cpufreq_pdev = {
 	.name = "imx6q-cpufreq",
 };
 

arch/arm/mach-imx/mm-imx3.c

@@ -82,7 +82,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
 
-void __init imx3_init_l2x0(void)
+static void __init imx3_init_l2x0(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base;

arch/arm/mach-imx/src.c

@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
+#include "common.h"
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020

arch/arm/mach-imx/tzic.c

@@ -49,7 +49,7 @@
 #define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
 #define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
 
-void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+static void __iomem *tzic_base;
 static struct irq_domain *domain;
 
 #define TZIC_NUM_IRQS 128

arch/arm/mach-msm/include/mach/uncompress.h

@@ -37,7 +37,7 @@ static void putc(int c)
 	 * Wait for TX_READY to be set; but skip it if we have a
 	 * TX underrun.
 	 */
-	if (UART_DM_SR & 0x08)
+	if (!(UART_DM_SR & 0x08))
 		while (!(UART_DM_ISR & 0x80))
 			cpu_relax();
 

arch/arm/mach-omap1/Kconfig

@@ -55,12 +55,6 @@ config MACH_OMAP_H3
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
-config MACH_OMAP_HTCWIZARD
-	bool "HTC Wizard"
-	depends on ARCH_OMAP850
-	help
-	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
-
 config MACH_HERALD
 	bool "HTC Herald"
 	depends on ARCH_OMAP850

arch/arm/mach-omap2/Kconfig

@@ -55,6 +55,7 @@ config SOC_HAS_REALTIME_COUNTER
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_OMAP2PLUS
+	depends on ARCH_MULTI_V6
 	default y
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
@@ -64,6 +65,7 @@ config ARCH_OMAP2
 config ARCH_OMAP3
 	bool "TI OMAP3"
 	depends on ARCH_OMAP2PLUS
+	depends on ARCH_MULTI_V7
 	default y
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
@@ -80,6 +82,7 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
@@ -99,6 +102,7 @@ config ARCH_OMAP4
 
 config SOC_OMAP5
 	bool "TI OMAP5"
+	depends on ARCH_MULTI_V7
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -135,6 +139,7 @@ config SOC_TI81XX
 
 config SOC_AM33XX
 	bool "AM33XX support"
+	depends on ARCH_MULTI_V7
 	default y
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
@@ -408,7 +413,7 @@ config OMAP3_SDRC_AC_TIMING
 
 config OMAP4_ERRATA_I688
 	bool "OMAP4 errata: Async Bridge Corruption"
-	depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
+	depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/board-2430sdp.c

@@ -166,7 +166,7 @@ static void __init sdp2430_display_init(void)
 	omap_display_init(&sdp2430_dss_data);
 }
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
 	.cs		= 5,

arch/arm/mach-omap2/board-h4.c

@@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void)
 		return 0;
 }
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
 	.cs		= 1,

arch/arm/mach-omap2/cclock33xx_data.c

@@ -958,6 +958,14 @@ int __init am33xx_clk_init(void)
 
 	clk_set_parent(&timer3_fck, &sys_clkin_ck);
 	clk_set_parent(&timer6_fck, &sys_clkin_ck);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
 
 	return 0;
 }

arch/arm/mach-omap2/dpll3xxx.c

@@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	_omap3_noncore_dpll_bypass(clk);
 
 	/*
-	 * Set jitter correction. No jitter correction for OMAP4 and 3630
+	 * Set jitter correction. Jitter correction applicable for OMAP343X
-	 * since freqsel field is no longer present
+	 * only since freqsel field is no longer present on other devices.
 	 */
-	if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
+	if (cpu_is_omap343x()) {
 		v = __raw_readl(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
@@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!dd)
 		return -EINVAL;
 
-	__clk_prepare(dd->clk_bypass);
-	clk_enable(dd->clk_bypass);
-	__clk_prepare(dd->clk_ref);
-	clk_enable(dd->clk_ref);
-
 	if (__clk_get_rate(dd->clk_bypass) == rate &&
 	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		pr_debug("%s: %s: set rate: entering bypass.\n",
 			 __func__, __clk_get_name(hw->clk));
 
+		__clk_prepare(dd->clk_bypass);
+		clk_enable(dd->clk_bypass);
 		ret = _omap3_noncore_dpll_bypass(clk);
 		if (!ret)
 			new_parent = dd->clk_bypass;
+		clk_disable(dd->clk_bypass);
+		__clk_unprepare(dd->clk_bypass);
 	} else {
+		__clk_prepare(dd->clk_ref);
+		clk_enable(dd->clk_ref);
+
 		if (dd->last_rounded_rate != rate)
 			rate = __clk_round_rate(hw->clk, rate);
 
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
 
-		/* No freqsel on AM335x, OMAP4 and OMAP3630 */
+		/* Freqsel is available only on OMAP343X devices */
-		if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
+		if (cpu_is_omap343x()) {
-		    !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			WARN_ON(!freqsel);
@@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		ret = omap3_noncore_dpll_program(clk, freqsel);
 		if (!ret)
 			new_parent = dd->clk_ref;
+		clk_disable(dd->clk_ref);
+		__clk_unprepare(dd->clk_ref);
 	}
 	/*
 	* FIXME - this is all wrong.  common code handles reparenting and
@@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!ret)
 		__clk_reparent(hw->clk, new_parent);
 
-	clk_disable(dd->clk_ref);
-	__clk_unprepare(dd->clk_ref);
-	clk_disable(dd->clk_bypass);
-	__clk_unprepare(dd->clk_bypass);
-
 	return 0;
 }
 

arch/arm/mach-omap2/dsp.c

@@ -26,7 +26,7 @@
 #include "control.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
 #include "omap-pm.h"
 #endif
 
@@ -35,7 +35,7 @@
 static struct platform_device *omap_dsp_pdev;
 
 static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
 	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
 	.dsp_get_opp = omap_pm_dsp_get_opp,
 	.cpu_set_freq = omap_pm_cpu_set_freq,

arch/arm/mach-omap2/id.c

@@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void)
 	case 0xb942:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP5430_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = OMAP5430_REV_ES2_0;
 		}
 		break;
 
 	case 0xb998:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP5432_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = OMAP5432_REV_ES2_0;
 		}
 		break;
 
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP5430_REV_ES1_0;
+		omap_revision = OMAP5430_REV_ES2_0;
 	}
 
 	pr_info("OMAP%04x ES%d.0\n",

arch/arm/mach-omap2/io.c

@@ -277,6 +277,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 		.length		= L4_PER_54XX_SIZE,
 		.type		= MT_DEVICE,
 	},
+#ifdef CONFIG_OMAP4_ERRATA_I688
+	{
+		.virtual	= OMAP4_SRAM_VA,
+		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
+		.length		= PAGE_SIZE,
+		.type		= MT_MEMORY_SO,
+	},
+#endif
 };
 #endif
 
@@ -329,6 +337,7 @@ void __init omap4_map_io(void)
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*

arch/arm/mach-omap2/omap4-common.c

@@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void)
  */
 static int __init omap4_sar_ram_init(void)
 {
+	unsigned long sar_base;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
 	 */
-	if (!cpu_is_omap44xx())
+	if (cpu_is_omap44xx())
+		sar_base = OMAP44XX_SAR_RAM_BASE;
+	else if (soc_is_omap54xx())
+		sar_base = OMAP54XX_SAR_RAM_BASE;
+	else
 		return -ENOMEM;
 
 	/* Static mapping, never released */
-	sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+	sar_ram_base = ioremap(sar_base, SZ_16K);
 	if (WARN_ON(!sar_ram_base))
 		return -ENOMEM;
 

arch/arm/mach-omap2/omap4-sar-layout.h

@@ -48,13 +48,13 @@
 #define SAR_BACKUP_STATUS_WAKEUPGEN		0x10
 
 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x8d4)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x9dc)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x8e8)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x9f0)
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x8fc)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0xa04)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0x910)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0xa18)
-#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0x924)
+#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0xa2c)
-#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x928)
+#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x930)
-#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0xa34)
 #define OMAP5_SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x800)
 
 #endif

arch/arm/mach-omap2/omap54xx.h

@@ -28,5 +28,6 @@
 #define OMAP54XX_PRCM_MPU_BASE		0x48243000
 #define OMAP54XX_SCM_BASE		0x4a002000
 #define OMAP54XX_CTRL_BASE		0x4a002800
+#define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
 #endif /* __ASM_SOC_OMAP555554XX_H */

arch/arm/mach-omap2/omap_hwmod.c

@@ -611,8 +611,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
-	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
-
 	return 0;
 }
 
@@ -646,8 +644,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
-	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
-
 	return 0;
 }
 

arch/arm/mach-omap2/omap_hwmod.h

@@ -482,15 +482,13 @@ struct omap_hwmod_omap4_prcm {
  * These are for internal use only and are managed by the omap_hwmod code.
  *
  * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
  * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
  * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
  *     causes the first call to _enable() to only update the pinmux
  */
 #define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+#define _HWMOD_SKIP_ENABLE			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
 
 /*
  * omap_hwmod._state definitions

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -28,6 +28,7 @@
 #include "prm-regbits-33xx.h"
 #include "i2c.h"
 #include "mmc.h"
+#include "wd_timer.h"
 
 /*
  * IP blocks
@@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
 };
 
 /* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
+	.sysc		= &wdt_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
 };
 
 /*
@@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = {
 	.name		= "wd_timer2",
 	.class		= &am33xx_wd_timer_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
 	.main_clk	= "wdt1_fck",
 	.prcm		= {
 		.omap4	= {

arch/arm/mach-omap2/powerdomain.c

@@ -52,7 +52,6 @@ enum {
 #define ALREADYACTIVE_SWITCH		0
 #define FORCEWAKEUP_SWITCH		1
 #define LOWPOWERSTATE_SWITCH		2
-#define ERROR_SWITCH			3
 
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
@@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
 {
 	u8 sleep_switch;
 
-	if (curr_pwrst < 0) {
+	if (curr_pwrst < PWRDM_POWER_ON) {
-		WARN_ON(1);
-		sleep_switch = ERROR_SWITCH;
-	} else if (curr_pwrst < PWRDM_POWER_ON) {
 		if (curr_pwrst > pwrst &&
 		    pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
 		    arch_pwrdm->pwrdm_set_lowpwrstchange) {
@@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm)
  */
 int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 {
-	u8 curr_pwrst, next_pwrst, sleep_switch;
+	u8 next_pwrst, sleep_switch;
+	int curr_pwrst;
 	int ret = 0;
 	bool hwsup = false;
 
@@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	pwrdm_lock(pwrdm);
 
 	curr_pwrst = pwrdm_read_pwrst(pwrdm);
+	if (curr_pwrst < 0) {
+		ret = -EINVAL;
+		goto osps_out;
+	}
+
 	next_pwrst = pwrdm_read_next_pwrst(pwrdm);
 	if (curr_pwrst == pwrst && next_pwrst == pwrst)
 		goto osps_out;
 
 	sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
 							    pwrst, &hwsup);
-	if (sleep_switch == ERROR_SWITCH) {
-		ret = -EINVAL;
-		goto osps_out;
-	}
 
 	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
 	if (ret)

arch/arm/mach-omap2/prm44xx.c

@@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
 /* Read a register in a CM/PRM instance in the PRM module */
 u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
+	return __raw_readl(prm_base + inst + reg);
 }
 
 /* Write into a register in a CM/PRM instance in the PRM module */
 void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
+	__raw_writel(val, prm_base + inst + reg);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
@@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
 		return 0;
 
 	return prm_register(&omap44xx_prm_ll_data);

arch/arm/mach-omap2/soc.h

@@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #define OMAP54XX_CLASS		0x54000054
 #define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
 #define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);

arch/arm/mach-omap2/timer.c

@@ -62,6 +62,7 @@
 #define OMAP2_MPU_SOURCE	"sys_ck"
 #define OMAP3_MPU_SOURCE	OMAP2_MPU_SOURCE
 #define OMAP4_MPU_SOURCE	"sys_clkin_ck"
+#define OMAP5_MPU_SOURCE	"sys_clkin"
 #define OMAP2_32K_SOURCE	"func_32k_ck"
 #define OMAP3_32K_SOURCE	"omap_32k_fck"
 #define OMAP4_32K_SOURCE	"sys_32k_ck"
@@ -487,7 +488,7 @@ static void __init realtime_counter_init(void)
 		pr_err("%s: ioremap failed\n", __func__);
 		return;
 	}
-	sys_clk = clk_get(NULL, "sys_clkin_ck");
+	sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE);
 	if (IS_ERR(sys_clk)) {
 		pr_err("%s: failed to get system clock handle\n", __func__);
 		iounmap(base);
@@ -620,7 +621,7 @@ void __init omap4_local_timer_init(void)
 
 #ifdef CONFIG_SOC_OMAP5
 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP4_MPU_SOURCE);
+			2, OMAP5_MPU_SOURCE);
 void __init omap5_realtime_timer_init(void)
 {
 	int err;

arch/arm/mach-orion5x/common.c

@@ -19,6 +19,7 @@
 #include <linux/ata_platform.h>
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
+#include <linux/cpu.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>

arch/arm/mach-tegra/board-harmony-pcie.c

@@ -62,7 +62,11 @@ int __init harmony_pcie_init(void)
 		goto err_reg;
 	}
 
-	regulator_enable(regulator);
+	err = regulator_enable(regulator);
+	if (err) {
+		pr_err("%s: regulator_enable failed: %d\n", __func__, err);
+		goto err_en;
+	}
 
 	err = tegra_pcie_init(true, true);
 	if (err) {
@@ -74,6 +78,7 @@ int __init harmony_pcie_init(void)
 
 err_pcie:
 	regulator_disable(regulator);
+err_en:
 	regulator_put(regulator);
 err_reg:
 	gpio_free(en_vdd_1v05);

arch/arm/mach-tegra/cpuidle-tegra30.c

@@ -99,12 +99,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
 
 	smp_wmb();
 
-	save_cpu_arch_register();
-
 	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
 
-	restore_cpu_arch_register();
-
 	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
 
 	return true;

arch/arm/mach-tegra/headsmp.S

@@ -7,8 +7,5 @@
 
 ENTRY(tegra_secondary_startup)
         bl      v7_invalidate_l1
-	/* Enable coresight */
-	mov32	r0, 0xC5ACCE55
-	mcr	p14, 0, r0, c7, c12, 6
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)

arch/arm/mach-tegra/platsmp.c

@@ -91,7 +91,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
 	if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
 		timeout = jiffies + msecs_to_jiffies(50);
 		do {
-			if (!tegra_powergate_is_powered(pwrgateid))
+			if (tegra_powergate_is_powered(pwrgateid))
 				goto remove_clamps;
 			udelay(10);
 		} while (time_before(jiffies, timeout));
@@ -124,6 +124,9 @@ static int tegra30_power_up_cpu(unsigned int cpu)
 
 	/* Remove I/O clamps. */
 	ret = tegra_powergate_remove_clamping(pwrgateid);
+	if (ret)
+		return ret;
+
 	udelay(10);
 
 	/* Clear flow controller CSR. */

arch/arm/mach-tegra/pm.c

@@ -46,26 +46,11 @@
 #define PMC_CPUPWROFF_TIMER	0xcc
 
 #ifdef CONFIG_PM_SLEEP
-static unsigned int g_diag_reg;
 static DEFINE_SPINLOCK(tegra_lp2_lock);
 static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
 static struct clk *tegra_pclk;
 void (*tegra_tear_down_cpu)(void);
 
-void save_cpu_arch_register(void)
-{
-	/* read diagnostic register */
-	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
-	return;
-}
-
-void restore_cpu_arch_register(void)
-{
-	/* write diagnostic register */
-	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
-	return;
-}
-
 static void set_power_timers(unsigned long us_on, unsigned long us_off)
 {
 	unsigned long long ticks;
@@ -119,8 +104,6 @@ static void restore_cpu_complex(void)
 	tegra_cpu_clock_resume();
 
 	flowctrl_cpu_suspend_exit(cpu);
-
-	restore_cpu_arch_register();
 }
 
 /*
@@ -145,8 +128,6 @@ static void suspend_cpu_complex(void)
 	tegra_cpu_clock_suspend();
 
 	flowctrl_cpu_suspend_enter(cpu);
-
-	save_cpu_arch_register();
 }
 
 void tegra_clear_cpu_in_lp2(int phy_cpu_id)
@@ -181,6 +162,11 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id)
 	return last_cpu;
 }
 
+int tegra_cpu_do_idle(void)
+{
+	return cpu_do_idle();
+}
+
 static int tegra_sleep_cpu(unsigned long v2p)
 {
 	/* Switch to the identity mapping. */

arch/arm/mach-tegra/powergate.c

@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/seq_file.h>
@@ -75,7 +76,7 @@ static int tegra_powergate_set(int id, bool new_state)
 
 	if (status == new_state) {
 		spin_unlock_irqrestore(&tegra_powergate_lock, flags);
-		return -EINVAL;
+		return 0;
 	}
 
 	pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE);
@@ -168,6 +169,7 @@ int tegra_powergate_sequence_power_up(int id, struct clk *clk)
 err_power:
 	return ret;
 }
+EXPORT_SYMBOL(tegra_powergate_sequence_power_up);
 
 int tegra_cpu_powergate_id(int cpuid)
 {

arch/arm/mach-tegra/reset-handler.S

@@ -41,12 +41,10 @@
  */
 ENTRY(tegra_resume)
 	bl	v7_invalidate_l1
-	/* Enable coresight */
-	mov32	r0, 0xC5ACCE55
-	mcr	p14, 0, r0, c7, c12, 6
 
 	cpu_id	r0
 	cmp	r0, #0				@ CPU0?
+ THUMB(	it	ne )
 	bne	cpu_resume			@ no
 
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
@@ -99,6 +97,8 @@ ENTRY(__tegra_cpu_reset_handler_start)
  *
  * Register usage within the reset handler:
  *
+ *      Others: scratch
+ *      R6  = SoC ID << 8
  *      R7  = CPU present (to the OS) mask
  *      R8  = CPU in LP1 state mask
  *      R9  = CPU in LP2 state mask
@@ -114,6 +114,40 @@ ENTRY(__tegra_cpu_reset_handler_start)
 ENTRY(__tegra_cpu_reset_handler)
 
 	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
+
+	mov32	r6, TEGRA_APB_MISC_BASE
+	ldr	r6, [r6, #APB_MISC_GP_HIDREV]
+	and	r6, r6, #0xff00
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+t20_check:
+	cmp	r6, #(0x20 << 8)
+	bne	after_t20_check
+t20_errata:
+	# Tegra20 is a Cortex-A9 r1p1
+	mrc	p15, 0, r0, c1, c0, 0   @ read system control register
+	orr	r0, r0, #1 << 14        @ erratum 716044
+	mcr	p15, 0, r0, c1, c0, 0   @ write system control register
+	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
+	orr	r0, r0, #1 << 4         @ erratum 742230
+	orr	r0, r0, #1 << 11        @ erratum 751472
+	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
+	b	after_errata
+after_t20_check:
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+t30_check:
+	cmp	r6, #(0x30 << 8)
+	bne	after_t30_check
+t30_errata:
+	# Tegra30 is a Cortex-A9 r2p9
+	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
+	orr	r0, r0, #1 << 6         @ erratum 743622
+	orr	r0, r0, #1 << 11        @ erratum 751472
+	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
+	b	after_errata
+after_t30_check:
+#endif
+after_errata:
 	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
 	and	r10, r10, #0x3			@ R10 = CPU number
 	mov	r11, #1
@@ -129,16 +163,13 @@ ENTRY(__tegra_cpu_reset_handler)
 
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
+	cmp	r6, #(0x20 << 8)
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
 	bne	1f
 	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r6, TEGRA_PMC_BASE
+	mov32	r5, TEGRA_PMC_BASE
 	mov	r0, #0
 	cmp	r10, #0
-	strne	r0, [r6, #PMC_SCRATCH41]
+	strne	r0, [r5, #PMC_SCRATCH41]
 1:
 #endif
 

arch/arm/mach-tegra/sleep-tegra20.S

@@ -197,7 +197,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
 	mov	r3, #CPU_RESETTABLE
 	str	r3, [r0]
 
-	bl	cpu_do_idle
+	bl	tegra_cpu_do_idle
 
 	/*
 	 * cpu may be reset while in wfi, which will return through

arch/arm/mach-tegra/sleep-tegra30.S

@@ -66,7 +66,9 @@ ENTRY(tegra30_cpu_shutdown)
 		FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
 		FLOW_CTRL_CSR_ENABLE
 	mov	r4, #(1 << 4)
-	orr	r12, r12, r4, lsl r3
+ ARM(	orr	r12, r12, r4, lsl r3	)
+ THUMB(	lsl	r4, r4, r3		)
+ THUMB(	orr	r12, r12, r4		)
 	str	r12, [r1]
 
 	/* Halt this CPU. */

arch/arm/mach-tegra/sleep.h

@@ -92,7 +92,7 @@
 
 #ifdef CONFIG_CACHE_L2X0
 .macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
-	adr	\tmp1, \phys_l2x0_saved_regs
+	W(adr)	\tmp1, \phys_l2x0_saved_regs
 	ldr	\tmp1, [\tmp1]
 	ldr	\tmp2, [\tmp1, #L2X0_R_PHY_BASE]
 	ldr	\tmp3, [\tmp2, #L2X0_CTRL]

arch/arm/mach-u300/include/mach/u300-regs.h

@@ -95,7 +95,7 @@
 #define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
 
 /* Fast UART1 on U335 only */
-#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#define U300_UART1_BASE			(U300_FAST_PER_PHYS_BASE+0x7000)
 
 /*
  * SLOW peripherals

arch/arm/mach-ux500/board-mop500-regulators.c

@@ -30,6 +30,20 @@ struct regulator_init_data gpio_en_3v3_regulator = {
        .consumer_supplies = gpio_en_3v3_consumers,
 };
 
+static struct regulator_consumer_supply sdi0_reg_consumers[] = {
+        REGULATOR_SUPPLY("vqmmc", "sdi0"),
+};
+
+struct regulator_init_data sdi0_reg_init_data = {
+        .constraints = {
+                .min_uV         = 1800000,
+                .max_uV         = 2900000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS,
+        },
+        .num_consumer_supplies  = ARRAY_SIZE(sdi0_reg_consumers),
+        .consumer_supplies      = sdi0_reg_consumers,
+};
+
 /*
  * TPS61052 regulator
  */

arch/arm/mach-ux500/board-mop500-regulators.h

@@ -18,6 +18,7 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
 extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
 extern struct regulator_init_data tps61052_regulator;
 extern struct regulator_init_data gpio_en_3v3_regulator;
+extern struct regulator_init_data sdi0_reg_init_data;
 
 void mop500_regulator_init(void);
 

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -31,35 +31,6 @@
  * SDI 0 (MicroSD slot)
  */
 
-/* GPIO pins used by the sdi0 level shifter */
-static int sdi0_en = -1;
-static int sdi0_vsel = -1;
-
-static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios)
-{
-	switch (ios->power_mode) {
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		/*
-		 * Level shifter voltage should depend on vdd to when deciding
-		 * on either 1.8V or 2.9V. Once the decision has been made the
-		 * level shifter must be disabled and re-enabled with a changed
-		 * select signal in order to switch the voltage. Since there is
-		 * no framework support yet for indicating 1.8V in vdd, use the
-		 * default 2.9V.
-		 */
-		gpio_direction_output(sdi0_vsel, 0);
-		gpio_direction_output(sdi0_en, 1);
-		break;
-	case MMC_POWER_OFF:
-		gpio_direction_output(sdi0_vsel, 0);
-		gpio_direction_output(sdi0_en, 0);
-		break;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
@@ -100,22 +71,6 @@ struct mmci_platform_data mop500_sdi0_data = {
 
 static void sdi0_configure(struct device *parent)
 {
-	int ret;
-
-	ret = gpio_request(sdi0_en, "level shifter enable");
-	if (!ret)
-		ret = gpio_request(sdi0_vsel,
-				   "level shifter 1v8-3v select");
-
-	if (ret) {
-		pr_warning("unable to config sdi0 gpios for level shifter.\n");
-		return;
-	}
-
-	/* Select the default 2.9V and enable level shifter */
-	gpio_direction_output(sdi0_vsel, 0);
-	gpio_direction_output(sdi0_en, 1);
-
 	/* Add the device, force v2 to subrevision 1 */
 	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
@@ -123,8 +78,6 @@ static void sdi0_configure(struct device *parent)
 void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_en = GPIO_SDMMC_EN;
-	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
 	sdi0_configure(parent);
 }
 
@@ -263,8 +216,6 @@ void __init snowball_sdi_init(struct device *parent)
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
-	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
 	sdi0_configure(parent);
 }
 
@@ -276,8 +227,6 @@ void __init hrefv60_sdi_init(struct device *parent)
 	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_en = HREFV60_SDMMC_EN_GPIO;
-	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
 	sdi0_configure(parent);
 	/* WLAN SDIO channel */
 	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);

arch/arm/mach-ux500/board-mop500.c

@@ -25,6 +25,8 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
@@ -90,6 +92,37 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
        },
 };
 
+/* Dynamically populated. */
+static struct gpio sdi0_reg_gpios[] = {
+	{ 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" },
+};
+
+static struct gpio_regulator_state sdi0_reg_states[] = {
+	{ .value = 2900000, .gpios = (0 << 0) },
+	{ .value = 1800000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config sdi0_reg_info = {
+	.supply_name		= "ext-mmc-level-shifter",
+	.gpios			= sdi0_reg_gpios,
+	.nr_gpios		= ARRAY_SIZE(sdi0_reg_gpios),
+	.states			= sdi0_reg_states,
+	.nr_states		= ARRAY_SIZE(sdi0_reg_states),
+	.type			= REGULATOR_VOLTAGE,
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &sdi0_reg_init_data,
+	.startup_delay		= 100,
+};
+
+static struct platform_device sdi0_regulator = {
+	.name = "gpio-regulator",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &sdi0_reg_info,
+	},
+};
+
 static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
 };
@@ -488,6 +521,7 @@ static struct hash_platform_data u8500_hash1_platform_data = {
 /* add any platform devices here - TODO */
 static struct platform_device *mop500_platform_devs[] __initdata = {
 	&mop500_gpio_keys_device,
+	&sdi0_regulator,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -631,6 +665,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_gpio_en_3v3_regulator_dev,
 	&u8500_thsens_device,
 	&u8500_cpufreq_cooling_device,
+	&sdi0_regulator,
 };
 
 static void __init mop500_init_machine(void)
@@ -642,6 +677,9 @@ static void __init mop500_init_machine(void)
 	platform_device_register(&db8500_prcmu_device);
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
+	sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
+	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
+
 	mop500_pinmaps_init();
 	parent = u8500_init_devices(&ab8500_platdata);
 
@@ -675,6 +713,10 @@ static void __init snowball_init_machine(void)
 	int i;
 
 	platform_device_register(&db8500_prcmu_device);
+
+	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
+	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
+
 	snowball_pinmaps_init();
 	parent = u8500_init_devices(&ab8500_platdata);
 
@@ -710,6 +752,9 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
+	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
+	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
+
 	hrefv60_pinmaps_init();
 	parent = u8500_init_devices(&ab8500_platdata);
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -282,6 +282,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
+	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),

drivers/clk/tegra/clk-tegra20.c

@@ -711,8 +711,8 @@ static void tegra20_pll_init(void)
 }
 
 static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
-				      "pll_p_cclk", "pll_p_out4_cclk",
+				      "pll_p", "pll_p_out4",
-				      "pll_p_out3_cclk", "clk_d", "pll_x" };
+				      "pll_p_out3", "clk_d", "pll_x" };
 static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
 				      "pll_p_out3", "pll_p_out2", "clk_d",
 				      "clk_32k", "pll_m_out1" };
@@ -721,38 +721,6 @@ static void tegra20_super_clk_init(void)
 {
 	struct clk *clk;
 
-	/*
-	 * DIV_U71 dividers for CCLK, these dividers are used only
-	 * if parent clock is fixed rate.
-	 */
-
-	/*
-	 * Clock input to cclk divided from pll_p using
-	 * U71 divider of cclk.
-	 */
-	clk = tegra_clk_register_divider("pll_p_cclk", "pll_p",
-				clk_base + SUPER_CCLK_DIVIDER, 0,
-				TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
-	clk_register_clkdev(clk, "pll_p_cclk", NULL);
-
-	/*
-	 * Clock input to cclk divided from pll_p_out3 using
-	 * U71 divider of cclk.
-	 */
-	clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3",
-				clk_base + SUPER_CCLK_DIVIDER, 0,
-				TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
-	clk_register_clkdev(clk, "pll_p_out3_cclk", NULL);
-
-	/*
-	 * Clock input to cclk divided from pll_p_out4 using
-	 * U71 divider of cclk.
-	 */
-	clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4",
-				clk_base + SUPER_CCLK_DIVIDER, 0,
-				TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
-	clk_register_clkdev(clk, "pll_p_out4_cclk", NULL);
-
 	/* CCLK */
 	clk = tegra_clk_register_super_mux("cclk", cclk_parents,
 			      ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,

drivers/clk/ux500/u8500_clk.c

@@ -324,7 +324,8 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
 				BIT(0), 0);
-	clk_register_clkdev(clk, NULL, "fsmc");
+	clk_register_clkdev(clk, "fsmc", NULL);
+	clk_register_clkdev(clk, NULL, "smsc911x");
 
 	clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
 				BIT(1), 0);

drivers/mmc/host/mmci.c

@@ -1141,6 +1141,11 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
+		if (!IS_ERR(mmc->supply.vqmmc) &&
+		    regulator_is_enabled(mmc->supply.vqmmc))
+			regulator_disable(mmc->supply.vqmmc);
+
 		break;
 	case MMC_POWER_UP:
 		if (!IS_ERR(mmc->supply.vmmc))
@@ -1155,6 +1160,10 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 		break;
 	case MMC_POWER_ON:
+		if (!IS_ERR(mmc->supply.vqmmc) &&
+		    !regulator_is_enabled(mmc->supply.vqmmc))
+			regulator_enable(mmc->supply.vqmmc);
+
 		pwr |= MCI_PWR_ON;
 		break;
 	}

drivers/net/ethernet/smsc/smsc911x.c

@@ -33,6 +33,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/crc32.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/etherdevice.h>
@@ -144,6 +145,9 @@ struct smsc911x_data {
 
 	/* regulators */
 	struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];
+
+	/* clock */
+	struct clk *clk;
 };
 
 /* Easy access to information */
@@ -369,7 +373,7 @@ smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
 }
 
 /*
- * enable resources, currently just regulators.
+ * enable regulator and clock resources.
  */
 static int smsc911x_enable_resources(struct platform_device *pdev)
 {
@@ -382,6 +386,13 @@ static int smsc911x_enable_resources(struct platform_device *pdev)
 	if (ret)
 		netdev_err(ndev, "failed to enable regulators %d\n",
 				ret);
+
+	if (!IS_ERR(pdata->clk)) {
+		ret = clk_prepare_enable(pdata->clk);
+		if (ret < 0)
+			netdev_err(ndev, "failed to enable clock %d\n", ret);
+	}
+
 	return ret;
 }
 
@@ -396,6 +407,10 @@ static int smsc911x_disable_resources(struct platform_device *pdev)
 
 	ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies),
 			pdata->supplies);
+
+	if (!IS_ERR(pdata->clk))
+		clk_disable_unprepare(pdata->clk);
+
 	return ret;
 }
 
@@ -421,6 +436,12 @@ static int smsc911x_request_resources(struct platform_device *pdev)
 	if (ret)
 		netdev_err(ndev, "couldn't get regulators %d\n",
 				ret);
+
+	/* Request clock */
+	pdata->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pdata->clk))
+		netdev_warn(ndev, "couldn't get clock %li\n", PTR_ERR(pdata->clk));
+
 	return ret;
 }
 
@@ -436,6 +457,12 @@ static void smsc911x_free_resources(struct platform_device *pdev)
 	/* Free regulators */
 	regulator_bulk_free(ARRAY_SIZE(pdata->supplies),
 			pdata->supplies);
+
+	/* Free clock */
+	if (!IS_ERR(pdata->clk)) {
+		clk_put(pdata->clk);
+		pdata->clk = NULL;
+	}
 }
 
 /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read