mirror of
https://github.com/torvalds/linux.git
synced 2025-11-04 10:40:15 +02:00
arm64: dts: Add support for NXP LS1028A SoC
LS1028A contains two ARM v8 CortexA72 processor cores
with 32 KB L1-D cache and 48 KB L1-I cache
Features summary
Two 32-bit / 64-bit ARM v8 Cortex-A72 CPUs
- Arranged as single clusters of two cores sharing a 1 MB L2 cache
- Speed Up to 1.3 GHz
- Support for cluster power-gating.
Cache coherent interconnect (CCI-400)
- Hardware-managed data coherency
- Up to 400 MHz
32-bit DDR4 SDRAM memory controller with ECC
Two PCIe 3.0 controllers
One serial ATA (SATA 3.0) controller
Two high-speed USB 3.0 controllers with integrated PHY
Following levels of DTSI/DTS files have been created for the LS1028A
SoC family:
- fsl-ls1028a.dtsi:
DTS-Include file for NXP LS1028A SoC.
- fsl-ls1028a-qds.dts:
DTS file for NXP LS1028A QDS board.
- fsl-ls1028a-rdb.dts:
DTS file for NXP LS1028A RDB board
Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Bhaskar Upadhaya
Shawn Guo
parent
1fa35bc09d
commit
8897f3255c
4 changed files with 507 additions and 0 deletions
|
|
@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
|
|||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
|
||||
|
|
|
|||
93
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
Normal file
93
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
Normal file
|
|
@ -0,0 +1,93 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device Tree file for NXP LS1028A QDS Board.
|
||||
*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* Harninder Rai <harninder.rai@nxp.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "fsl-ls1028a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LS1028A QDS Board";
|
||||
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
|
||||
|
||||
aliases {
|
||||
gpio0 = &gpio1;
|
||||
gpio1 = &gpio2;
|
||||
gpio2 = &gpio3;
|
||||
serial0 = &duart0;
|
||||
serial1 = &duart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x1 0x00000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&duart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&duart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@77 {
|
||||
compatible = "nxp,pca9847";
|
||||
reg = <0x77>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2>;
|
||||
|
||||
current-monitor@40 {
|
||||
compatible = "ti,ina220";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
|
||||
current-monitor@41 {
|
||||
compatible = "ti,ina220";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x3>;
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf2129";
|
||||
reg = <0x51>;
|
||||
};
|
||||
|
||||
eeprom@56 {
|
||||
compatible = "atmel,24c512";
|
||||
reg = <0x56>;
|
||||
};
|
||||
|
||||
eeprom@57 {
|
||||
compatible = "atmel,24c512";
|
||||
reg = <0x57>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
73
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
Normal file
73
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
Normal file
|
|
@ -0,0 +1,73 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device Tree file for NXP LS1028A RDB Board.
|
||||
*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* Harninder Rai <harninder.rai@nxp.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "fsl-ls1028a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LS1028A RDB Board";
|
||||
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
|
||||
|
||||
aliases {
|
||||
serial0 = &duart0;
|
||||
serial1 = &duart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x1 0x0000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
i2c-mux@77 {
|
||||
compatible = "nxp,pca9847";
|
||||
reg = <0x77>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x02>;
|
||||
|
||||
current-monitor@40 {
|
||||
compatible = "ti,ina220";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <500>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x3>;
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf2129";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&duart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&duart1 {
|
||||
status = "okay";
|
||||
};
|
||||
339
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
Normal file
339
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
Normal file
|
|
@ -0,0 +1,339 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device Tree Include file for NXP Layerscape-1028A family SoC.
|
||||
*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* Harninder Rai <harninder.rai@nxp.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
|
||||
/ {
|
||||
compatible = "fsl,ls1028a";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x0>;
|
||||
enable-method = "psci";
|
||||
clocks = <&clockgen 1 0>;
|
||||
next-level-cache = <&l2>;
|
||||
cpu-idle-states = <&CPU_PH20>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x1>;
|
||||
enable-method = "psci";
|
||||
clocks = <&clockgen 1 0>;
|
||||
next-level-cache = <&l2>;
|
||||
cpu-idle-states = <&CPU_PH20>;
|
||||
};
|
||||
|
||||
l2: l2-cache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
idle-states {
|
||||
/*
|
||||
* PSCI node is not added default, U-boot will add missing
|
||||
* parts if it determines to use PSCI.
|
||||
*/
|
||||
entry-method = "arm,psci";
|
||||
|
||||
CPU_PH20: cpu-ph20 {
|
||||
compatible = "arm,idle-state";
|
||||
idle-state-name = "PH20";
|
||||
arm,psci-suspend-param = <0x00010000>;
|
||||
entry-latency-us = <1000>;
|
||||
exit-latency-us = <1000>;
|
||||
min-residency-us = <3000>;
|
||||
};
|
||||
};
|
||||
|
||||
sysclk: clock-sysclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
clock-output-names = "sysclk";
|
||||
};
|
||||
|
||||
reboot {
|
||||
compatible ="syscon-reboot";
|
||||
regmap = <&dcfg>;
|
||||
offset = <0xb0>;
|
||||
mask = <0x02>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
gic: interrupt-controller@6000000 {
|
||||
compatible= "arm,gic-v3";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
|
||||
<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
|
||||
#interrupt-cells= <3>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
|
||||
IRQ_TYPE_LEVEL_LOW)>;
|
||||
its: gic-its@6020000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
msi-controller;
|
||||
reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ddr: memory-controller@1080000 {
|
||||
compatible = "fsl,qoriq-memory-controller";
|
||||
reg = <0x0 0x1080000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
|
||||
big-endian;
|
||||
};
|
||||
|
||||
dcfg: syscon@1e00000 {
|
||||
compatible = "fsl,ls1028a-dcfg", "syscon";
|
||||
reg = <0x0 0x1e00000 0x0 0x10000>;
|
||||
big-endian;
|
||||
};
|
||||
|
||||
scfg: syscon@1fc0000 {
|
||||
compatible = "fsl,ls1028a-scfg", "syscon";
|
||||
reg = <0x0 0x1fc0000 0x0 0x10000>;
|
||||
big-endian;
|
||||
};
|
||||
|
||||
clockgen: clock-controller@1300000 {
|
||||
compatible = "fsl,ls1028a-clockgen";
|
||||
reg = <0x0 0x1300000 0x0 0xa0000>;
|
||||
#clock-cells = <2>;
|
||||
clocks = <&sysclk>;
|
||||
};
|
||||
|
||||
i2c0: i2c@2000000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2000000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@2010000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2010000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@2020000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2020000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c@2030000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2030000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c@2040000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2040000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c@2050000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2050000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c@2060000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2060000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c7: i2c@2070000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x2070000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
duart0: serial@21c0500 {
|
||||
compatible = "fsl,ns16550", "ns16550a";
|
||||
reg = <0x00 0x21c0500 0x0 0x100>;
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
duart1: serial@21c0600 {
|
||||
compatible = "fsl,ns16550", "ns16550a";
|
||||
reg = <0x00 0x21c0600 0x0 0x100>;
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio1: gpio@2300000 {
|
||||
compatible = "fsl,qoriq-gpio";
|
||||
reg = <0x0 0x2300000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio@2310000 {
|
||||
compatible = "fsl,qoriq-gpio";
|
||||
reg = <0x0 0x2310000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio3: gpio@2320000 {
|
||||
compatible = "fsl,qoriq-gpio";
|
||||
reg = <0x0 0x2320000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
wdog0: watchdog@23c0000 {
|
||||
compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt";
|
||||
reg = <0x0 0x23c0000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
big-endian;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sata: sata@3200000 {
|
||||
compatible = "fsl,ls1028a-ahci";
|
||||
reg = <0x0 0x3200000 0x0 0x10000>,
|
||||
<0x0 0x20140520 0x0 0x4>;
|
||||
reg-names = "ahci", "sata-ecc";
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen 4 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
smmu: iommu@5000000 {
|
||||
compatible = "arm,mmu-500";
|
||||
reg = <0 0x5000000 0 0x800000>;
|
||||
#global-interrupts = <8>;
|
||||
#iommu-cells = <1>;
|
||||
stream-match-mask = <0x7c00>;
|
||||
/* global secure fault */
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||||
/* combined secure interrupt */
|
||||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
/* global non-secure fault */
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
||||
/* combined non-secure interrupt */
|
||||
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
||||
/* performance counter interrupts 0-7 */
|
||||
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
|
||||
/* per context interrupt, 64 interrupts */
|
||||
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in a new issue