mirror of
				https://github.com/torvalds/linux.git
				synced 2025-11-04 02:30:34 +02:00 
			
		
		
		
	net: dsa: tag_sja1105: be dsa_loop-safe
Add support for tag_sja1105 running on non-sja1105 DSA ports, by making sure that every time we dereference dp->priv, we check the switch's dsa_switch_ops (otherwise we access a struct sja1105_port structure that is in fact something else). This adds an unconditional build-time dependency between sja1105 being built as module => tag_sja1105 must also be built as module. This was there only for PTP before. Some sane defaults must also take place when not running on sja1105 hardware. These are: - sja1105_xmit_tpid: the sja1105 driver uses different VLAN protocols depending on VLAN awareness and switch revision (when an encapsulated VLAN must be sent). Default to 0x8100. - sja1105_rcv_meta_state_machine: this aggregates PTP frames with their metadata timestamp frames. When running on non-sja1105 hardware, don't do that and accept all frames unmodified. - sja1105_defer_xmit: calls sja1105_port_deferred_xmit in sja1105_main.c which writes a management route over SPI. When not running on sja1105 hardware, bypass the SPI write and send the frame as-is. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
		
							parent
							
								
									93e271632c
								
							
						
					
					
						commit
						994d2cbb08
					
				
					 4 changed files with 48 additions and 16 deletions
				
			
		| 
						 | 
				
			
			@ -28,8 +28,6 @@
 | 
			
		|||
#define SJA1105_UNKNOWN_MULTICAST	0x010000000000ull
 | 
			
		||||
#define SJA1105_DEFAULT_VLAN		(VLAN_N_VID - 1)
 | 
			
		||||
 | 
			
		||||
static const struct dsa_switch_ops sja1105_switch_ops;
 | 
			
		||||
 | 
			
		||||
static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len,
 | 
			
		||||
			     unsigned int startup_delay)
 | 
			
		||||
{
 | 
			
		||||
| 
						 | 
				
			
			@ -3100,7 +3098,7 @@ static void sja1105_teardown(struct dsa_switch *ds)
 | 
			
		|||
	sja1105_static_config_free(&priv->static_config);
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
static const struct dsa_switch_ops sja1105_switch_ops = {
 | 
			
		||||
const struct dsa_switch_ops sja1105_switch_ops = {
 | 
			
		||||
	.get_tag_protocol	= sja1105_get_tag_protocol,
 | 
			
		||||
	.setup			= sja1105_setup,
 | 
			
		||||
	.teardown		= sja1105_teardown,
 | 
			
		||||
| 
						 | 
				
			
			@ -3149,6 +3147,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
 | 
			
		|||
	.port_bridge_tx_fwd_offload = dsa_tag_8021q_bridge_tx_fwd_offload,
 | 
			
		||||
	.port_bridge_tx_fwd_unoffload = dsa_tag_8021q_bridge_tx_fwd_unoffload,
 | 
			
		||||
};
 | 
			
		||||
EXPORT_SYMBOL_GPL(sja1105_switch_ops);
 | 
			
		||||
 | 
			
		||||
static const struct of_device_id sja1105_dt_ids[];
 | 
			
		||||
 | 
			
		||||
| 
						 | 
				
			
			
 | 
			
		|||
| 
						 | 
				
			
			@ -88,4 +88,22 @@ static inline void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port,
 | 
			
		|||
 | 
			
		||||
#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) */
 | 
			
		||||
 | 
			
		||||
#if IS_ENABLED(CONFIG_NET_DSA_SJA1105)
 | 
			
		||||
 | 
			
		||||
extern const struct dsa_switch_ops sja1105_switch_ops;
 | 
			
		||||
 | 
			
		||||
static inline bool dsa_port_is_sja1105(struct dsa_port *dp)
 | 
			
		||||
{
 | 
			
		||||
	return dp->ds->ops == &sja1105_switch_ops;
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
#else
 | 
			
		||||
 | 
			
		||||
static inline bool dsa_port_is_sja1105(struct dsa_port *dp)
 | 
			
		||||
{
 | 
			
		||||
	return false;
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
#endif
 | 
			
		||||
 | 
			
		||||
#endif /* _NET_DSA_SJA1105_H */
 | 
			
		||||
| 
						 | 
				
			
			
 | 
			
		|||
| 
						 | 
				
			
			@ -138,7 +138,7 @@ config NET_DSA_TAG_LAN9303
 | 
			
		|||
 | 
			
		||||
config NET_DSA_TAG_SJA1105
 | 
			
		||||
	tristate "Tag driver for NXP SJA1105 switches"
 | 
			
		||||
	depends on (NET_DSA_SJA1105 && NET_DSA_SJA1105_PTP) || !NET_DSA_SJA1105 || !NET_DSA_SJA1105_PTP
 | 
			
		||||
	depends on NET_DSA_SJA1105 || !NET_DSA_SJA1105
 | 
			
		||||
	select PACKING
 | 
			
		||||
	help
 | 
			
		||||
	  Say Y or M if you want to enable support for tagging frames with the
 | 
			
		||||
| 
						 | 
				
			
			
 | 
			
		|||
| 
						 | 
				
			
			@ -116,9 +116,14 @@ static inline bool sja1105_is_meta_frame(const struct sk_buff *skb)
 | 
			
		|||
}
 | 
			
		||||
 | 
			
		||||
/* Calls sja1105_port_deferred_xmit in sja1105_main.c */
 | 
			
		||||
static struct sk_buff *sja1105_defer_xmit(struct sja1105_port *sp,
 | 
			
		||||
static struct sk_buff *sja1105_defer_xmit(struct dsa_port *dp,
 | 
			
		||||
					  struct sk_buff *skb)
 | 
			
		||||
{
 | 
			
		||||
	struct sja1105_port *sp = dp->priv;
 | 
			
		||||
 | 
			
		||||
	if (!dsa_port_is_sja1105(dp))
 | 
			
		||||
		return skb;
 | 
			
		||||
 | 
			
		||||
	/* Increase refcount so the kfree_skb in dsa_slave_xmit
 | 
			
		||||
	 * won't really free the packet.
 | 
			
		||||
	 */
 | 
			
		||||
| 
						 | 
				
			
			@ -128,8 +133,13 @@ static struct sk_buff *sja1105_defer_xmit(struct sja1105_port *sp,
 | 
			
		|||
	return NULL;
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
static u16 sja1105_xmit_tpid(struct sja1105_port *sp)
 | 
			
		||||
static u16 sja1105_xmit_tpid(struct dsa_port *dp)
 | 
			
		||||
{
 | 
			
		||||
	struct sja1105_port *sp = dp->priv;
 | 
			
		||||
 | 
			
		||||
	if (unlikely(!dsa_port_is_sja1105(dp)))
 | 
			
		||||
		return ETH_P_8021Q;
 | 
			
		||||
 | 
			
		||||
	return sp->xmit_tpid;
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
| 
						 | 
				
			
			@ -155,7 +165,7 @@ static struct sk_buff *sja1105_imprecise_xmit(struct sk_buff *skb,
 | 
			
		|||
	 */
 | 
			
		||||
	tx_vid = dsa_8021q_bridge_tx_fwd_offload_vid(dp->bridge_num);
 | 
			
		||||
 | 
			
		||||
	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv), tx_vid);
 | 
			
		||||
	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp), tx_vid);
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
 | 
			
		||||
| 
						 | 
				
			
			@ -174,9 +184,9 @@ static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
 | 
			
		|||
	 * is the .port_deferred_xmit driver callback.
 | 
			
		||||
	 */
 | 
			
		||||
	if (unlikely(sja1105_is_link_local(skb)))
 | 
			
		||||
		return sja1105_defer_xmit(dp->priv, skb);
 | 
			
		||||
		return sja1105_defer_xmit(dp, skb);
 | 
			
		||||
 | 
			
		||||
	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv),
 | 
			
		||||
	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp),
 | 
			
		||||
			     ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
 | 
			
		||||
}
 | 
			
		||||
 | 
			
		||||
| 
						 | 
				
			
			@ -200,7 +210,7 @@ static struct sk_buff *sja1110_xmit(struct sk_buff *skb,
 | 
			
		|||
	 * tag_8021q TX VLANs.
 | 
			
		||||
	 */
 | 
			
		||||
	if (likely(!sja1105_is_link_local(skb)))
 | 
			
		||||
		return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv),
 | 
			
		||||
		return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp),
 | 
			
		||||
				     ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
 | 
			
		||||
 | 
			
		||||
	skb_push(skb, SJA1110_HEADER_LEN);
 | 
			
		||||
| 
						 | 
				
			
			@ -265,16 +275,16 @@ static struct sk_buff
 | 
			
		|||
				bool is_link_local,
 | 
			
		||||
				bool is_meta)
 | 
			
		||||
{
 | 
			
		||||
	struct sja1105_port *sp;
 | 
			
		||||
	struct dsa_port *dp;
 | 
			
		||||
 | 
			
		||||
	dp = dsa_slave_to_port(skb->dev);
 | 
			
		||||
	sp = dp->priv;
 | 
			
		||||
 | 
			
		||||
	/* Step 1: A timestampable frame was received.
 | 
			
		||||
	 * Buffer it until we get its meta frame.
 | 
			
		||||
	 */
 | 
			
		||||
	if (is_link_local) {
 | 
			
		||||
		struct dsa_port *dp = dsa_slave_to_port(skb->dev);
 | 
			
		||||
		struct sja1105_port *sp = dp->priv;
 | 
			
		||||
 | 
			
		||||
		if (unlikely(!dsa_port_is_sja1105(dp)))
 | 
			
		||||
			return skb;
 | 
			
		||||
 | 
			
		||||
		if (!test_bit(SJA1105_HWTS_RX_EN, &sp->data->state))
 | 
			
		||||
			/* Do normal processing. */
 | 
			
		||||
			return skb;
 | 
			
		||||
| 
						 | 
				
			
			@ -307,8 +317,13 @@ static struct sk_buff
 | 
			
		|||
	 * frame, which serves no further purpose).
 | 
			
		||||
	 */
 | 
			
		||||
	} else if (is_meta) {
 | 
			
		||||
		struct dsa_port *dp = dsa_slave_to_port(skb->dev);
 | 
			
		||||
		struct sja1105_port *sp = dp->priv;
 | 
			
		||||
		struct sk_buff *stampable_skb;
 | 
			
		||||
 | 
			
		||||
		if (unlikely(!dsa_port_is_sja1105(dp)))
 | 
			
		||||
			return skb;
 | 
			
		||||
 | 
			
		||||
		/* Drop the meta frame if we're not in the right state
 | 
			
		||||
		 * to process it.
 | 
			
		||||
		 */
 | 
			
		||||
| 
						 | 
				
			
			
 | 
			
		|||
		Loading…
	
		Reference in a new issue