mirror of
https://github.com/torvalds/linux.git
synced 2025-11-04 10:40:15 +02:00
w1: w1_therm: Add support for GXCAS GX20MH01 device.
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ivan Zaentsev
Greg Kroah-Hartman
parent
021da53e65
commit
9ace0b4dab
3 changed files with 92 additions and 33 deletions
|
|
@ -49,7 +49,7 @@ Description:
|
|||
will be changed only in device RAM, so it will be cleared when
|
||||
power is lost. Trigger a 'save' to EEPROM command to keep
|
||||
values after power-on. Read or write are :
|
||||
* '9..12': device resolution in bit
|
||||
* '9..14': device resolution in bit
|
||||
or resolution to set in bit
|
||||
* '-xx': xx is kernel error when reading the resolution
|
||||
* Anything else: do nothing
|
||||
|
|
@ -89,7 +89,7 @@ Description:
|
|||
*write* :
|
||||
* '0' : save the 2 or 3 bytes to the device EEPROM
|
||||
(i.e. TH, TL and config register)
|
||||
* '9..12' : set the device resolution in RAM
|
||||
* '9..14' : set the device resolution in RAM
|
||||
(if supported)
|
||||
* Anything else: do nothing
|
||||
refer to Documentation/w1/slaves/w1_therm.rst for detailed
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ Supported chips:
|
|||
|
||||
* Maxim ds18*20 based temperature sensors.
|
||||
* Maxim ds1825 based temperature sensors.
|
||||
* GXCAS GC20MH01 temperature sensor.
|
||||
|
||||
Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
|
||||
|
||||
|
|
@ -13,8 +14,8 @@ Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
|
|||
Description
|
||||
-----------
|
||||
|
||||
w1_therm provides basic temperature conversion for ds18*20 devices, and the
|
||||
ds28ea00 device.
|
||||
w1_therm provides basic temperature conversion for ds18*20, ds28ea00, GX20MH01
|
||||
devices.
|
||||
|
||||
Supported family codes:
|
||||
|
||||
|
|
@ -130,4 +131,12 @@ conversion and temperature reads 85.00 (powerup value) or 127.94 (insufficient
|
|||
power), the driver returns a conversion error. Bit mask ``2`` enables poll for
|
||||
conversion completion (normal power only) by generating read cycles on the bus
|
||||
after conversion starts. In parasite power mode this feature is not available.
|
||||
Feature bit masks may be combined (OR).
|
||||
Feature bit masks may be combined (OR). See accompanying sysfs documentation:
|
||||
:ref:`Documentation/w1/slaves/w1_therm.rst <w1_therm>`
|
||||
|
||||
GX20MH01 device shares family number 0x28 with DS18*20. The device is generally
|
||||
compatible with DS18B20. Added are lowest 2^-5, 2^-6 temperature bits in Config
|
||||
register; R2 bit in Config register enabling 13 and 14 bit resolutions. The
|
||||
device is powered up in 14-bit resolution mode. The conversion times specified
|
||||
in the datasheet are too low and have to be increased. The device supports
|
||||
driver features ``1`` and ``2``.
|
||||
|
|
|
|||
|
|
@ -80,6 +80,18 @@ static u16 bulk_read_device_counter; /* =0 as per C standard */
|
|||
#define W1_POLL_CONVERT_TEMP 2000 /* Timeout for W1_CONVERT_TEMP, ms */
|
||||
#define W1_POLL_RECALL_EEPROM 500 /* Timeout for W1_RECALL_EEPROM, ms*/
|
||||
|
||||
/* Masks for resolution functions, work with all devices */
|
||||
/* Bit mask for config register for all devices, bits 7,6,5 */
|
||||
#define W1_THERM_RESOLUTION_MASK 0xE0
|
||||
/* Bit offset of resolution in config register for all devices */
|
||||
#define W1_THERM_RESOLUTION_SHIFT 5
|
||||
/* Bit offset of resolution in config register for all devices */
|
||||
#define W1_THERM_RESOLUTION_SHIFT 5
|
||||
/* Add this to bit value to get resolution */
|
||||
#define W1_THERM_RESOLUTION_MIN 9
|
||||
/* Maximum allowed value */
|
||||
#define W1_THERM_RESOLUTION_MAX 14
|
||||
|
||||
/* Helpers Macros */
|
||||
|
||||
/*
|
||||
|
|
@ -523,7 +535,9 @@ static inline int w1_DS18B20_convert_time(struct w1_slave *sl)
|
|||
if (SLAVE_CONV_TIME_OVERRIDE(sl) != CONV_TIME_DEFAULT)
|
||||
return SLAVE_CONV_TIME_OVERRIDE(sl);
|
||||
|
||||
/* Return the conversion time from datasheet, depending on resolution */
|
||||
/* Return the conversion time, depending on resolution,
|
||||
* select maximum conversion time among all compatible devices
|
||||
*/
|
||||
switch (SLAVE_RESOLUTION(sl)) {
|
||||
case 9:
|
||||
ret = 95;
|
||||
|
|
@ -535,6 +549,14 @@ static inline int w1_DS18B20_convert_time(struct w1_slave *sl)
|
|||
ret = 375;
|
||||
break;
|
||||
case 12:
|
||||
ret = 750;
|
||||
break;
|
||||
case 13:
|
||||
ret = 850; /* GX20MH01 only. Datasheet says 500ms, but that's not enough. */
|
||||
break;
|
||||
case 14:
|
||||
ret = 1600; /* GX20MH01 only. Datasheet says 1000ms - not enough */
|
||||
break;
|
||||
default:
|
||||
ret = 750;
|
||||
}
|
||||
|
|
@ -568,62 +590,71 @@ static inline int w1_DS18S20_write_data(struct w1_slave *sl,
|
|||
static inline int w1_DS18B20_set_resolution(struct w1_slave *sl, int val)
|
||||
{
|
||||
int ret;
|
||||
u8 new_config_register[3]; /* array of data to be written */
|
||||
struct therm_info info, info2;
|
||||
|
||||
/* resolution of DS18B20 is in the range [9..12] bits */
|
||||
if (val < 9 || val > 12)
|
||||
/* DS18B20 resolution is 9 to 12 bits */
|
||||
/* GX20MH01 resolution is 9 to 14 bits */
|
||||
if (val < W1_THERM_RESOLUTION_MIN || val > W1_THERM_RESOLUTION_MAX)
|
||||
return -EINVAL;
|
||||
|
||||
val -= 9; /* soustract 9 the lowest resolution in bit */
|
||||
val = (val << 5); /* shift to position bit 5 & bit 6 */
|
||||
/* Calc bit value from resolution */
|
||||
val = (val - W1_THERM_RESOLUTION_MIN) << W1_THERM_RESOLUTION_SHIFT;
|
||||
|
||||
/*
|
||||
* Read the scratchpad to change only the required bits
|
||||
* (bit5 & bit 6 from byte 4)
|
||||
*/
|
||||
ret = read_scratchpad(sl, &info);
|
||||
if (!ret) {
|
||||
new_config_register[0] = info.rom[2];
|
||||
new_config_register[1] = info.rom[3];
|
||||
/* config register is byte 4 & mask 0b10011111*/
|
||||
new_config_register[2] = (info.rom[4] & 0x9F) |
|
||||
(u8) val;
|
||||
} else
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
|
||||
info.rom[4] &= ~W1_THERM_RESOLUTION_MASK;
|
||||
info.rom[4] |= val;
|
||||
|
||||
/* Write data in the device RAM */
|
||||
ret = w1_DS18B20_write_data(sl, new_config_register);
|
||||
ret = w1_DS18B20_write_data(sl, info.rom + 2);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Some DS18B20 clones don't support resolution change, read back to verify */
|
||||
/* Have to read back the resolution to verify an actual value
|
||||
* GX20MH01 and DS18B20 are indistinguishable by family number, but resolutions differ
|
||||
* Some DS18B20 clones don't support resolution change
|
||||
*/
|
||||
ret = read_scratchpad(sl, &info2);
|
||||
if (ret)
|
||||
/* Scratchpad read fail */
|
||||
return ret;
|
||||
|
||||
if ((info2.rom[4] & 0x9F) == (info.rom[4] & 0x9F))
|
||||
if ((info2.rom[4] & W1_THERM_RESOLUTION_MASK) == (info.rom[4] & W1_THERM_RESOLUTION_MASK))
|
||||
return 0;
|
||||
else
|
||||
return -EIO;
|
||||
|
||||
/* Resolution verify error */
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static inline int w1_DS18B20_get_resolution(struct w1_slave *sl)
|
||||
{
|
||||
int ret;
|
||||
u8 config_register;
|
||||
int resolution;
|
||||
struct therm_info info;
|
||||
|
||||
ret = read_scratchpad(sl, &info);
|
||||
|
||||
if (!ret) {
|
||||
config_register = info.rom[4]; /* config register is byte 4 */
|
||||
config_register &= 0x60; /* 0b01100000 keep only bit 5 & 6 */
|
||||
config_register = (config_register >> 5); /* shift */
|
||||
config_register += 9; /* add 9 the lowest resolution in bit */
|
||||
ret = (int) config_register;
|
||||
}
|
||||
return ret;
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
resolution = ((info.rom[4] & W1_THERM_RESOLUTION_MASK) >> W1_THERM_RESOLUTION_SHIFT)
|
||||
+ W1_THERM_RESOLUTION_MIN;
|
||||
/* GX20MH01 has one special case:
|
||||
* >=14 means 14 bits when getting resolution from bit value.
|
||||
* Other devices have no more then 12 bits.
|
||||
*/
|
||||
if (resolution > W1_THERM_RESOLUTION_MAX)
|
||||
resolution = W1_THERM_RESOLUTION_MAX;
|
||||
|
||||
return resolution;
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -636,11 +667,28 @@ static inline int w1_DS18B20_get_resolution(struct w1_slave *sl)
|
|||
*/
|
||||
static inline int w1_DS18B20_convert_temp(u8 rom[9])
|
||||
{
|
||||
s16 t = le16_to_cpup((__le16 *)rom);
|
||||
int t;
|
||||
u32 bv;
|
||||
|
||||
/* Config register bit R2 = 1 - GX20MH01 in 13 or 14 bit resolution mode */
|
||||
if (rom[4] & 0x80) {
|
||||
/* Signed 16-bit value to unsigned, cpu order */
|
||||
bv = le16_to_cpup((__le16 *)rom);
|
||||
|
||||
/* Insert two temperature bits from config register */
|
||||
/* Avoid arithmetic shift of signed value */
|
||||
bv = (bv << 2) | (rom[4] & 3);
|
||||
|
||||
t = (int) sign_extend32(bv, 17); /* Degrees, lowest bit is 2^-6 */
|
||||
return (t*1000)/64; /* Millidegrees */
|
||||
}
|
||||
|
||||
t = (int)le16_to_cpup((__le16 *)rom);
|
||||
return t*1000/16;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* w1_DS18S20_convert_temp() - temperature computation for DS18S20
|
||||
* @rom: data read from device RAM (8 data bytes + 1 CRC byte)
|
||||
|
|
@ -672,6 +720,7 @@ static inline int w1_DS18S20_convert_temp(u8 rom[9])
|
|||
}
|
||||
|
||||
/* Device capability description */
|
||||
/* GX20MH01 device shares family number and structure with DS18B20 */
|
||||
|
||||
static struct w1_therm_family_converter w1_therm_families[] = {
|
||||
{
|
||||
|
|
@ -693,6 +742,7 @@ static struct w1_therm_family_converter w1_therm_families[] = {
|
|||
.bulk_read = true
|
||||
},
|
||||
{
|
||||
/* Also used for GX20MH01 */
|
||||
.f = &w1_therm_family_DS18B20,
|
||||
.convert = w1_DS18B20_convert_temp,
|
||||
.get_conversion_time = w1_DS18B20_convert_time,
|
||||
|
|
|
|||
Loading…
Reference in a new issue