counter: 104-quad-8: Support Filter Clock Prescaler

The ACCES 104-QUAD-8 series does active filtering on the quadrature
input signals via the PC/104 bus clock (OSC 14.318 MHz). This patch
exposes the filter clock prescaler available on each channel.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/ABI/testing/sysfs-bus-counter-104-quad-8

@@ -1,3 +1,10 @@
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Filter clock factor for input Signal Y. This prescaler value
+		affects the inputs of both quadrature pair signals.
+
 What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org

drivers/counter/104-quad-8.c

@@ -43,6 +43,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  */
 struct quad8_iio {
 	struct counter_device counter;
+	unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
 	unsigned int preset[QUAD8_NUM_COUNTERS];
 	unsigned int count_mode[QUAD8_NUM_COUNTERS];
 	unsigned int quadrature_mode[QUAD8_NUM_COUNTERS];
@@ -84,6 +85,8 @@ struct quad8_iio {
 #define QUAD8_RLD_PRESET_CNTR 0x08
 /* Transfer Counter to Output Latch */
 #define QUAD8_RLD_CNTR_OUT 0x10
+/* Transfer Preset Register LSB to FCK Prescaler */
+#define QUAD8_RLD_PRESET_PSC 0x18
 #define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
 #define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
 #define QUAD8_CMR_QUADRATURE_X1 0x08
@@ -1140,6 +1143,50 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
 	return len;
 }
 
+static ssize_t quad8_signal_fck_prescaler_read(struct counter_device *counter,
+	struct counter_signal *signal, void *private, char *buf)
+{
+	const struct quad8_iio *const priv = counter->priv;
+	const size_t channel_id = signal->id / 2;
+
+	return sprintf(buf, "%u\n", priv->fck_prescaler[channel_id]);
+}
+
+static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter,
+	struct counter_signal *signal, void *private, const char *buf,
+	size_t len)
+{
+	struct quad8_iio *const priv = counter->priv;
+	const size_t channel_id = signal->id / 2;
+	const int base_offset = priv->base + 2 * channel_id;
+	u8 prescaler;
+	int ret;
+
+	ret = kstrtou8(buf, 0, &prescaler);
+	if (ret)
+		return ret;
+
+	priv->fck_prescaler[channel_id] = prescaler;
+
+	/* Reset Byte Pointer */
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+	/* Set filter clock factor */
+	outb(prescaler, base_offset);
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
+	     base_offset + 1);
+
+	return len;
+}
+
+static const struct counter_signal_ext quad8_signal_ext[] = {
+	{
+		.name = "filter_clock_prescaler",
+		.read = quad8_signal_fck_prescaler_read,
+		.write = quad8_signal_fck_prescaler_write
+	}
+};
+
 static const struct counter_signal_ext quad8_index_ext[] = {
 	COUNTER_SIGNAL_ENUM("index_polarity", &quad8_index_pol_enum),
 	COUNTER_SIGNAL_ENUM_AVAILABLE("index_polarity",	&quad8_index_pol_enum),
@@ -1147,9 +1194,11 @@ static const struct counter_signal_ext quad8_index_ext[] = {
 	COUNTER_SIGNAL_ENUM_AVAILABLE("synchronous_mode", &quad8_syn_mode_enum)
 };
 
-#define	QUAD8_QUAD_SIGNAL(_id, _name) {	\
+#define QUAD8_QUAD_SIGNAL(_id, _name) {		\
-	.id = (_id),			\
+	.id = (_id),				\
-	.name = (_name)			\
+	.name = (_name),			\
+	.ext = quad8_signal_ext,		\
+	.num_ext = ARRAY_SIZE(quad8_signal_ext)	\
 }
 
 #define	QUAD8_INDEX_SIGNAL(_id, _name) {	\
@@ -1314,6 +1363,12 @@ static int quad8_probe(struct device *dev, unsigned int id)
 		base_offset = base[id] + 2 * i;
 		/* Reset Byte Pointer */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+		/* Reset filter clock factor */
+		outb(0, base_offset);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
+		     base_offset + 1);
+		/* Reset Byte Pointer */
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 		/* Reset Preset Register */
 		for (j = 0; j < 3; j++)
 			outb(0x00, base_offset);

drivers/iio/pressure/icp10100.c

@@ -364,7 +364,7 @@ static int icp10100_read_raw_measures(struct iio_dev *indio_dev,
 	default:
 		ret = -EINVAL;
 		break;
-	};
+	}
 
 error_release:
 	iio_device_release_direct_mode(indio_dev);