mirror of
https://github.com/torvalds/linux.git
synced 2025-11-04 02:30:34 +02:00
drm/i2c: tda9950: add CEC driver
Add a CEC driver for the TDA9950, which is a stand-alone I2C CEC device, but is also integrated into HDMI transceivers such as the TDA9989 and TDA19989. The TDA9950 contains a command processor which handles retransmissions and the low level bus protocol. The driver just has to read and write the messages, and handle error conditions. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This commit is contained in:
Russell King
parent
ba8975f15b
commit
f0316f9389
4 changed files with 531 additions and 0 deletions
|
|
@ -26,4 +26,9 @@ config DRM_I2C_NXP_TDA998X
|
|||
help
|
||||
Support for NXP Semiconductors TDA998X HDMI encoders.
|
||||
|
||||
config DRM_I2C_NXP_TDA9950
|
||||
tristate "NXP Semiconductors TDA9950/TDA998X HDMI CEC"
|
||||
select CEC_NOTIFIER
|
||||
select CEC_CORE
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -7,3 +7,4 @@ obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o
|
|||
|
||||
tda998x-y := tda998x_drv.o
|
||||
obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o
|
||||
obj-$(CONFIG_DRM_I2C_NXP_TDA9950) += tda9950.o
|
||||
|
|
|
|||
509
drivers/gpu/drm/i2c/tda9950.c
Normal file
509
drivers/gpu/drm/i2c/tda9950.c
Normal file
|
|
@ -0,0 +1,509 @@
|
|||
/*
|
||||
* TDA9950 Consumer Electronics Control driver
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* The NXP TDA9950 implements the HDMI Consumer Electronics Control
|
||||
* interface. The host interface is similar to a mailbox: the data
|
||||
* registers starting at REG_CDR0 are written to send a command to the
|
||||
* internal CPU, and replies are read from these registers.
|
||||
*
|
||||
* As the data registers represent a mailbox, they must be accessed
|
||||
* as a single I2C transaction. See the TDA9950 data sheet for details.
|
||||
*/
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_data/tda9950.h>
|
||||
#include <linux/slab.h>
|
||||
#include <drm/drm_edid.h>
|
||||
#include <media/cec.h>
|
||||
#include <media/cec-notifier.h>
|
||||
|
||||
enum {
|
||||
REG_CSR = 0x00,
|
||||
CSR_BUSY = BIT(7),
|
||||
CSR_INT = BIT(6),
|
||||
CSR_ERR = BIT(5),
|
||||
|
||||
REG_CER = 0x01,
|
||||
|
||||
REG_CVR = 0x02,
|
||||
|
||||
REG_CCR = 0x03,
|
||||
CCR_RESET = BIT(7),
|
||||
CCR_ON = BIT(6),
|
||||
|
||||
REG_ACKH = 0x04,
|
||||
REG_ACKL = 0x05,
|
||||
|
||||
REG_CCONR = 0x06,
|
||||
CCONR_ENABLE_ERROR = BIT(4),
|
||||
CCONR_RETRY_MASK = 7,
|
||||
|
||||
REG_CDR0 = 0x07,
|
||||
|
||||
CDR1_REQ = 0x00,
|
||||
CDR1_CNF = 0x01,
|
||||
CDR1_IND = 0x81,
|
||||
CDR1_ERR = 0x82,
|
||||
CDR1_IER = 0x83,
|
||||
|
||||
CDR2_CNF_SUCCESS = 0x00,
|
||||
CDR2_CNF_OFF_STATE = 0x80,
|
||||
CDR2_CNF_BAD_REQ = 0x81,
|
||||
CDR2_CNF_CEC_ACCESS = 0x82,
|
||||
CDR2_CNF_ARB_ERROR = 0x83,
|
||||
CDR2_CNF_BAD_TIMING = 0x84,
|
||||
CDR2_CNF_NACK_ADDR = 0x85,
|
||||
CDR2_CNF_NACK_DATA = 0x86,
|
||||
};
|
||||
|
||||
struct tda9950_priv {
|
||||
struct i2c_client *client;
|
||||
struct device *hdmi;
|
||||
struct cec_adapter *adap;
|
||||
struct tda9950_glue *glue;
|
||||
u16 addresses;
|
||||
struct cec_msg rx_msg;
|
||||
struct cec_notifier *notify;
|
||||
bool open;
|
||||
};
|
||||
|
||||
static int tda9950_write_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
|
||||
{
|
||||
struct i2c_msg msg;
|
||||
u8 buf[cnt + 1];
|
||||
int ret;
|
||||
|
||||
buf[0] = addr;
|
||||
memcpy(buf + 1, p, cnt);
|
||||
|
||||
msg.addr = client->addr;
|
||||
msg.flags = 0;
|
||||
msg.len = cnt + 1;
|
||||
msg.buf = buf;
|
||||
|
||||
dev_dbg(&client->dev, "wr 0x%02x: %*ph\n", addr, cnt, p);
|
||||
|
||||
ret = i2c_transfer(client->adapter, &msg, 1);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
|
||||
return ret < 0 ? ret : 0;
|
||||
}
|
||||
|
||||
static void tda9950_write(struct i2c_client *client, u8 addr, u8 val)
|
||||
{
|
||||
tda9950_write_range(client, addr, &val, 1);
|
||||
}
|
||||
|
||||
static int tda9950_read_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
|
||||
{
|
||||
struct i2c_msg msg[2];
|
||||
int ret;
|
||||
|
||||
msg[0].addr = client->addr;
|
||||
msg[0].flags = 0;
|
||||
msg[0].len = 1;
|
||||
msg[0].buf = &addr;
|
||||
msg[1].addr = client->addr;
|
||||
msg[1].flags = I2C_M_RD;
|
||||
msg[1].len = cnt;
|
||||
msg[1].buf = p;
|
||||
|
||||
ret = i2c_transfer(client->adapter, msg, 2);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr);
|
||||
|
||||
dev_dbg(&client->dev, "rd 0x%02x: %*ph\n", addr, cnt, p);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static u8 tda9950_read(struct i2c_client *client, u8 addr)
|
||||
{
|
||||
int ret;
|
||||
u8 val;
|
||||
|
||||
ret = tda9950_read_range(client, addr, &val, 1);
|
||||
if (ret < 0)
|
||||
val = 0;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static irqreturn_t tda9950_irq(int irq, void *data)
|
||||
{
|
||||
struct tda9950_priv *priv = data;
|
||||
unsigned int tx_status;
|
||||
u8 csr, cconr, buf[19];
|
||||
u8 arb_lost_cnt, nack_cnt, err_cnt;
|
||||
|
||||
if (!priv->open)
|
||||
return IRQ_NONE;
|
||||
|
||||
csr = tda9950_read(priv->client, REG_CSR);
|
||||
if (!(csr & CSR_INT))
|
||||
return IRQ_NONE;
|
||||
|
||||
cconr = tda9950_read(priv->client, REG_CCONR) & CCONR_RETRY_MASK;
|
||||
|
||||
tda9950_read_range(priv->client, REG_CDR0, buf, sizeof(buf));
|
||||
|
||||
/*
|
||||
* This should never happen: the data sheet says that there will
|
||||
* always be a valid message if the interrupt line is asserted.
|
||||
*/
|
||||
if (buf[0] == 0) {
|
||||
dev_warn(&priv->client->dev, "interrupt pending, but no message?\n");
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
switch (buf[1]) {
|
||||
case CDR1_CNF: /* transmit result */
|
||||
arb_lost_cnt = nack_cnt = err_cnt = 0;
|
||||
switch (buf[2]) {
|
||||
case CDR2_CNF_SUCCESS:
|
||||
tx_status = CEC_TX_STATUS_OK;
|
||||
break;
|
||||
|
||||
case CDR2_CNF_ARB_ERROR:
|
||||
tx_status = CEC_TX_STATUS_ARB_LOST;
|
||||
arb_lost_cnt = cconr;
|
||||
break;
|
||||
|
||||
case CDR2_CNF_NACK_ADDR:
|
||||
tx_status = CEC_TX_STATUS_NACK;
|
||||
nack_cnt = cconr;
|
||||
break;
|
||||
|
||||
default: /* some other error, refer to TDA9950 docs */
|
||||
dev_err(&priv->client->dev, "CNF reply error 0x%02x\n",
|
||||
buf[2]);
|
||||
tx_status = CEC_TX_STATUS_ERROR;
|
||||
err_cnt = cconr;
|
||||
break;
|
||||
}
|
||||
/* TDA9950 executes all retries for us */
|
||||
tx_status |= CEC_TX_STATUS_MAX_RETRIES;
|
||||
cec_transmit_done(priv->adap, tx_status, arb_lost_cnt,
|
||||
nack_cnt, 0, err_cnt);
|
||||
break;
|
||||
|
||||
case CDR1_IND:
|
||||
priv->rx_msg.len = buf[0] - 2;
|
||||
if (priv->rx_msg.len > CEC_MAX_MSG_SIZE)
|
||||
priv->rx_msg.len = CEC_MAX_MSG_SIZE;
|
||||
|
||||
memcpy(priv->rx_msg.msg, buf + 2, priv->rx_msg.len);
|
||||
cec_received_msg(priv->adap, &priv->rx_msg);
|
||||
break;
|
||||
|
||||
default: /* unknown */
|
||||
dev_err(&priv->client->dev, "unknown service id 0x%02x\n",
|
||||
buf[1]);
|
||||
break;
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int tda9950_cec_transmit(struct cec_adapter *adap, u8 attempts,
|
||||
u32 signal_free_time, struct cec_msg *msg)
|
||||
{
|
||||
struct tda9950_priv *priv = adap->priv;
|
||||
u8 buf[CEC_MAX_MSG_SIZE + 2];
|
||||
|
||||
buf[0] = 2 + msg->len;
|
||||
buf[1] = CDR1_REQ;
|
||||
memcpy(buf + 2, msg->msg, msg->len);
|
||||
|
||||
if (attempts > 5)
|
||||
attempts = 5;
|
||||
|
||||
tda9950_write(priv->client, REG_CCONR, attempts);
|
||||
|
||||
return tda9950_write_range(priv->client, REG_CDR0, buf, 2 + msg->len);
|
||||
}
|
||||
|
||||
static int tda9950_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
|
||||
{
|
||||
struct tda9950_priv *priv = adap->priv;
|
||||
u16 addresses;
|
||||
u8 buf[2];
|
||||
|
||||
if (addr == CEC_LOG_ADDR_INVALID)
|
||||
addresses = priv->addresses = 0;
|
||||
else
|
||||
addresses = priv->addresses |= BIT(addr);
|
||||
|
||||
/* TDA9950 doesn't want address 15 set */
|
||||
addresses &= 0x7fff;
|
||||
buf[0] = addresses >> 8;
|
||||
buf[1] = addresses;
|
||||
|
||||
return tda9950_write_range(priv->client, REG_ACKH, buf, 2);
|
||||
}
|
||||
|
||||
/*
|
||||
* When operating as part of the TDA998x, we need additional handling
|
||||
* to initialise and shut down the TDA9950 part of the device. These
|
||||
* two hooks are provided to allow the TDA998x code to perform those
|
||||
* activities.
|
||||
*/
|
||||
static int tda9950_glue_open(struct tda9950_priv *priv)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (priv->glue && priv->glue->open)
|
||||
ret = priv->glue->open(priv->glue->data);
|
||||
|
||||
priv->open = true;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void tda9950_glue_release(struct tda9950_priv *priv)
|
||||
{
|
||||
priv->open = false;
|
||||
|
||||
if (priv->glue && priv->glue->release)
|
||||
priv->glue->release(priv->glue->data);
|
||||
}
|
||||
|
||||
static int tda9950_open(struct tda9950_priv *priv)
|
||||
{
|
||||
struct i2c_client *client = priv->client;
|
||||
int ret;
|
||||
|
||||
ret = tda9950_glue_open(priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Reset the TDA9950, and wait 250ms for it to recover */
|
||||
tda9950_write(client, REG_CCR, CCR_RESET);
|
||||
msleep(250);
|
||||
|
||||
tda9950_cec_adap_log_addr(priv->adap, CEC_LOG_ADDR_INVALID);
|
||||
|
||||
/* Start the command processor */
|
||||
tda9950_write(client, REG_CCR, CCR_ON);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tda9950_release(struct tda9950_priv *priv)
|
||||
{
|
||||
struct i2c_client *client = priv->client;
|
||||
int timeout = 50;
|
||||
u8 csr;
|
||||
|
||||
/* Stop the command processor */
|
||||
tda9950_write(client, REG_CCR, 0);
|
||||
|
||||
/* Wait up to .5s for it to signal non-busy */
|
||||
do {
|
||||
csr = tda9950_read(client, REG_CSR);
|
||||
if (!(csr & CSR_BUSY) || --timeout)
|
||||
break;
|
||||
msleep(10);
|
||||
} while (1);
|
||||
|
||||
/* Warn the user that their IRQ may die if it's shared. */
|
||||
if (csr & CSR_BUSY)
|
||||
dev_warn(&client->dev, "command processor failed to stop, irq%d may die (csr=0x%02x)\n",
|
||||
client->irq, csr);
|
||||
|
||||
tda9950_glue_release(priv);
|
||||
}
|
||||
|
||||
static int tda9950_cec_adap_enable(struct cec_adapter *adap, bool enable)
|
||||
{
|
||||
struct tda9950_priv *priv = adap->priv;
|
||||
|
||||
if (!enable) {
|
||||
tda9950_release(priv);
|
||||
return 0;
|
||||
} else {
|
||||
return tda9950_open(priv);
|
||||
}
|
||||
}
|
||||
|
||||
static const struct cec_adap_ops tda9950_cec_ops = {
|
||||
.adap_enable = tda9950_cec_adap_enable,
|
||||
.adap_log_addr = tda9950_cec_adap_log_addr,
|
||||
.adap_transmit = tda9950_cec_transmit,
|
||||
};
|
||||
|
||||
/*
|
||||
* When operating as part of the TDA998x, we need to claim additional
|
||||
* resources. These two hooks permit the management of those resources.
|
||||
*/
|
||||
static void tda9950_devm_glue_exit(void *data)
|
||||
{
|
||||
struct tda9950_glue *glue = data;
|
||||
|
||||
if (glue && glue->exit)
|
||||
glue->exit(glue->data);
|
||||
}
|
||||
|
||||
static int tda9950_devm_glue_init(struct device *dev, struct tda9950_glue *glue)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (glue && glue->init) {
|
||||
ret = glue->init(glue->data);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_add_action(dev, tda9950_devm_glue_exit, glue);
|
||||
if (ret)
|
||||
tda9950_devm_glue_exit(glue);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void tda9950_cec_del(void *data)
|
||||
{
|
||||
struct tda9950_priv *priv = data;
|
||||
|
||||
cec_delete_adapter(priv->adap);
|
||||
}
|
||||
|
||||
static int tda9950_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct tda9950_glue *glue = client->dev.platform_data;
|
||||
struct device *dev = &client->dev;
|
||||
struct tda9950_priv *priv;
|
||||
unsigned long irqflags;
|
||||
int ret;
|
||||
u8 cvr;
|
||||
|
||||
/*
|
||||
* We must have I2C functionality: our multi-byte accesses
|
||||
* must be performed as a single contiguous transaction.
|
||||
*/
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
||||
dev_err(&client->dev,
|
||||
"adapter does not support I2C functionality\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
/* We must have an interrupt to be functional. */
|
||||
if (client->irq <= 0) {
|
||||
dev_err(&client->dev, "driver requires an interrupt\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->client = client;
|
||||
priv->glue = glue;
|
||||
|
||||
i2c_set_clientdata(client, priv);
|
||||
|
||||
/*
|
||||
* If we're part of a TDA998x, we want the class devices to be
|
||||
* associated with the HDMI Tx so we have a tight relationship
|
||||
* between the HDMI interface and the CEC interface.
|
||||
*/
|
||||
priv->hdmi = dev;
|
||||
if (glue && glue->parent)
|
||||
priv->hdmi = glue->parent;
|
||||
|
||||
priv->adap = cec_allocate_adapter(&tda9950_cec_ops, priv, "tda9950",
|
||||
CEC_CAP_DEFAULTS,
|
||||
CEC_MAX_LOG_ADDRS);
|
||||
if (IS_ERR(priv->adap))
|
||||
return PTR_ERR(priv->adap);
|
||||
|
||||
ret = devm_add_action(dev, tda9950_cec_del, priv);
|
||||
if (ret) {
|
||||
cec_delete_adapter(priv->adap);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = tda9950_devm_glue_init(dev, glue);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = tda9950_glue_open(priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
cvr = tda9950_read(client, REG_CVR);
|
||||
|
||||
dev_info(&client->dev,
|
||||
"TDA9950 CEC interface, hardware version %u.%u\n",
|
||||
cvr >> 4, cvr & 15);
|
||||
|
||||
tda9950_glue_release(priv);
|
||||
|
||||
irqflags = IRQF_TRIGGER_FALLING;
|
||||
if (glue)
|
||||
irqflags = glue->irq_flags;
|
||||
|
||||
ret = devm_request_threaded_irq(dev, client->irq, NULL, tda9950_irq,
|
||||
irqflags | IRQF_SHARED | IRQF_ONESHOT,
|
||||
dev_name(&client->dev), priv);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
priv->notify = cec_notifier_get(priv->hdmi);
|
||||
if (!priv->notify)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = cec_register_adapter(priv->adap, priv->hdmi);
|
||||
if (ret < 0) {
|
||||
cec_notifier_put(priv->notify);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* CEC documentation says we must not call cec_delete_adapter
|
||||
* after a successful call to cec_register_adapter().
|
||||
*/
|
||||
devm_remove_action(dev, tda9950_cec_del, priv);
|
||||
|
||||
cec_register_cec_notifier(priv->adap, priv->notify);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tda9950_remove(struct i2c_client *client)
|
||||
{
|
||||
struct tda9950_priv *priv = i2c_get_clientdata(client);
|
||||
|
||||
cec_unregister_adapter(priv->adap);
|
||||
cec_notifier_put(priv->notify);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_device_id tda9950_ids[] = {
|
||||
{ "tda9950", 0 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, tda9950_ids);
|
||||
|
||||
static struct i2c_driver tda9950_driver = {
|
||||
.probe = tda9950_probe,
|
||||
.remove = tda9950_remove,
|
||||
.driver = {
|
||||
.name = "tda9950",
|
||||
},
|
||||
.id_table = tda9950_ids,
|
||||
};
|
||||
|
||||
module_i2c_driver(tda9950_driver);
|
||||
|
||||
MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
|
||||
MODULE_DESCRIPTION("TDA9950/TDA998x Consumer Electronics Control Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
16
include/linux/platform_data/tda9950.h
Normal file
16
include/linux/platform_data/tda9950.h
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
#ifndef LINUX_PLATFORM_DATA_TDA9950_H
|
||||
#define LINUX_PLATFORM_DATA_TDA9950_H
|
||||
|
||||
struct device;
|
||||
|
||||
struct tda9950_glue {
|
||||
struct device *parent;
|
||||
unsigned long irq_flags;
|
||||
void *data;
|
||||
int (*init)(void *);
|
||||
void (*exit)(void *);
|
||||
int (*open)(void *);
|
||||
void (*release)(void *);
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue