By design the MES will return an array result that is twice the number
of hung doorbells it can report.
i.e. if up k reported doorbells are supported, then the
second half of the array, also of length k, holds the HQD information
(type/queue/pipe) where queue 1 corresponds to index 0 and k,
queue 2 corresponds to index 1 and k + 1 etc ...
The driver will use the HDQ info to target queue/pipe reset for
hardware scheduled user compute queues.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the suspend and resume API rather than remove queue
and add queue API. The former just preempts the queue
while the latter remove it from the scheduler completely.
There is no need to do that, we only need preemption
in this case.
V2: replace queue_active with queue state
v3: set the suspend_fence_addr
v4: allocate another per queue buffer for the suspend fence, and set the sequence number.
also wait for the suspend fence. (Alex)
v5: use a wb slot (Alex)
v6: Change the timeout period. For MES, the default timeout is 2100000; /* 2100 ms */ (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will help on validating the userq input args, and
rejecting for the invalid userq request at the IOCTLs
first place.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a detect and reset callback and add the implementation
for mes. The callback will detect all hung queues of a
particular ip type (e.g., GFX or compute or SDMA) and
reset them.
v2: increase reset counter and set fence force completion
v3: Removed userq_mutex in mes_userq_detect_and_reset since the driver holds it when calling
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the state of the queue rather than simple active vs
not. This is needed for other states (hung, preempted, etc.).
While we are at it, move the state tracking into the user
queue front end code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we initialize the MQD as a secure queue.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the queue priority set by the user.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull it out of the MES code and into the generic code.
It's not MES specific and needs to be applied to all user
queues regardless of the backend.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split out the queue map from the mqd create call and split
out the queue unmap from the mqd destroy call. This splits
the queue setup and teardown with the actual enablement
in the firmware.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename to map and umap to better align with what is happening
at the firmware level and remove the extra level of indirection
in the MES userq code.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES queue deactivation and active status are already set in
mes_userq_unmap|map(), so the caller needn't set the queue_active
bit again.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take a reference when we create a queue and drop it
when we destroy the queue. We need to keep the device
active while user queues are active.
v2: squash in fix from Sunil
v3: squash in fix from Prike
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the MES process va end limit to max pfn.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a field in struct amdgpu_mqd_prop for userqueue
secure sem fence address since now we have a generic
file for mes_userqueue.c
- Add secure sem fence address mqd support to gfx12 into
their corresponding init functions.
- Enable secure semaphore IRQ handling
V2: Address review comment from Alex:
Use fence_address instead of fenceaddress (Shashank)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that all of the IP specific code has been moved into
the IP specific functions, we can make this code generic.
V2: Fixed build errors and porting logics (Shashank)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08 16:48:19 -04:00
Renamed from drivers/gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c (Browse further)
