-----BEGIN PGP SIGNATURE-----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=SVmB
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two short fixes that would be good to have before rc1"
* tag 'for-6.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix PAGE_SIZE format specifier in open_ctree()
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
There is an instance of -Wformat when targeting 32-bit architectures due
to using a 'size_t' specifier (which is 'unsigned int' for 32-bit
platforms) to print PAGE_SIZE:
In file included from fs/btrfs/compression.h:17,
from fs/btrfs/extent_io.h:15,
from fs/btrfs/locking.h:13,
from fs/btrfs/ctree.h:19,
from fs/btrfs/disk-io.c:22:
fs/btrfs/disk-io.c: In function 'open_ctree':
include/linux/kern_levels.h:5:25: error: format '%zu' expects argument of type 'size_t', but argument 4 has type 'long unsigned int' [-Werror=format=]
...
fs/btrfs/disk-io.c:3398:17: note: in expansion of macro 'btrfs_warn'
3398 | btrfs_warn(fs_info,
| ^~~~~~~~~~
PAGE_SIZE is consistently defined as an 'unsigned long' in
include/vsdo/page.h so use '%lu' to clear up the warning.
Fixes: 98077f7f21 ("btrfs: enable experimental bs > ps support")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=9wY+
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are no new features, the changes are in the core code, notably
tree-log error handling and reporting improvements, and initial
support for block size > page size.
Performance improvements:
- search data checksums in the commit root (previous transaction) to
avoid locking contention, this improves parallelism of read
heavy/low write workloads, and also reduces transaction commit
time; on real and reproducer workload the sync time went from
minutes to tens of seconds (workload and numbers are in the
changelog)
Core:
- tree-log updates:
- error handling improvements, transaction aborts
- add new error state 'O' (printed in status messages) when log
replay fails and is aborted
- reduced number of btrfs_path allocations when traversing the
tree
- 'block size > page size' support
- basic implementation with limitations, under experimental build
- limitations: no direct io, raid56, encoded read (standalone and
in send ioctl), encoded write
- preparatory work for compression, removing implicit assumptions
of page and block sizes
- compression workspaces are now per-filesystem, we cannot assume
common block size for work memory among different filesystems
- tree-checker now verifies INODE_EXTREF item (which is implementing
hardlinks)
- tree leaf pretty printer updates, there were missing data from
items, keys/items
- move config option CONFIG_BTRFS_REF_VERIFY to CONFIG_BTRFS_DEBUG,
it's a debugging feature and not needed to be enabled separately
- more struct btrfs_path auto free updates
- use ref_tracker API for tracking delayed inodes, enabled by mount
option 'ref_verify', allowing to better pinpoint leaking references
- in zoned mode, avoid selecting data relocation zoned for ordinary
data block groups
- updated and enhanced error messages
- lots of cleanups and refactoring"
* tag 'for-6.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (113 commits)
btrfs: use smp_mb__after_atomic() when forcing COW in create_pending_snapshot()
btrfs: add unlikely annotations to branches leading to transaction abort
btrfs: add unlikely annotations to branches leading to EIO
btrfs: add unlikely annotations to branches leading to EUCLEAN
btrfs: more trivial BTRFS_PATH_AUTO_FREE conversions
btrfs: zoned: don't fail mount needlessly due to too many active zones
btrfs: use kmalloc_array() for open-coded arithmetic in kmalloc()
btrfs: enable experimental bs > ps support
btrfs: add extra ASSERT()s to catch unaligned bios
btrfs: fix symbolic link reading when bs > ps
btrfs: prepare scrub to support bs > ps cases
btrfs: prepare zlib to support bs > ps cases
btrfs: prepare lzo to support bs > ps cases
btrfs: prepare zstd to support bs > ps cases
btrfs: prepare compression folio alloc/free for bs > ps cases
btrfs: fix the incorrect max_bytes value for find_lock_delalloc_range()
btrfs: remove pointless key offset setup in create_pending_snapshot()
btrfs: annotate btrfs_is_testing() as unlikely and make it return bool
btrfs: make the rule checking more readable for should_cow_block()
btrfs: simplify inline extent end calculation at replay_one_extent()
...
The unlikely() annotation is a static prediction hint that compiler may
use to reorder code out of hot path. We use it elsewhere (namely
tree-checker.c) for error branches that almost never happen, where
EIO is one of them.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The unlikely() annotation is a static prediction hint that compiler may
use to reorder code out of hot path. We use it elsewhere (namely
tree-checker.c) for error branches that almost never happen, where
EUCLEAN (a corruption) is one of them.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With all the preparation patches, we're able to finally enable btrfs
block size (sector size) larger than page size support and give it a
full fstests run.
And obviously this new feature is hidden behind experimental flags, and
should not be considered as a core feature yet as btrfs' default block
size is still 4K.
But this is still a feature that will shine in the future where 16K
block sized device are widely adopted.
For now there are some features explicitly disabled:
- Direct IO
This is the most complex part to support, the root reason is we can
not control the pages of iov iter passed in.
User space programs can only ensure the virtual addresses are
contiguous, but have no control on their physical addresses.
Our bs > ps support heavily relies on large folios, and direct IO
memory can easily break it.
So direct IO is disabled and will always fall back to buffered IO.
- RAID56
In theory we can convert RAID56 to use large folios, but it will need
to be converted back to page based if we want to support direct IO in
the future.
So just reject it for now.
- Encoded send
- Encoded read
Both are utilizing btrfs_encoded_read_regular_fill_pages(), and send
is utilizing vmallocated memory.
Unfortunately for vmallocated memory we can not guarantee the minimal
folio order.
For send, it will just always fallback to regular writes, which reads
from page cache and will follow the existing folio order requirement.
- Encoded write
Encoded write itself is allocating pages by themselves, and we can
easily change it to follow the minimal order.
But since encoded read is already disabled, there is no need to only
enable encoded write.
Finally just like what we did for bs < ps support in the past, add a
warning message for bs > ps mounts.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can annotate btrfs_is_testing() as unlikely since that's the most
expected scenario and it's desirable for the compiler to optimize for
the case we are not running the self tests. So add the annotation to
btrfs_is_testing() and while at it also make it return bool instead of
int.
Also make two of the existing callers use btrfs_is_testing() directly
instead of storing its result in a local variable.
On x86_64 with Debian's gcc 14.2.0-19 this resulted in a very tiny object
code reduction.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1913263 161567 15592 2090422 1fe5b6 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1913257 161567 15592 2090416 1fe5b0 fs/btrfs/btrfs.ko
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have this odd behaviour:
1) At btrfs_replay_log() we drop the reference of the log root tree if
the call to btrfs_recover_log_trees() failed;
2) But if the call to btrfs_recover_log_trees() did not fail, we don't
drop the reference in btrfs_replay_log() - we expect that
btrfs_recover_log_trees() does it in case it returns success.
Let's simplify this and make btrfs_replay_log() always drop the reference
on the log root tree, not only this simplifies code as it's what makes
sense since it's btrfs_replay_log() who grabbed the reference in the first
place.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside btrfs_fs_info we cache several bits shift like sectorsize_bits.
Apply this to max and min folio orders so that every time mapping order
needs to be applied we can skip the calculation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Annual typo fixing pass. Strangely codespell found only about 30% of
what is in this patch, the rest was done manually using text
spellchecker with a custom dictionary of acceptable terms.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
This involves:
- Add zstd_alloc_workspace_manager() and zstd_free_workspace_manager()
Those two functions will accept an fs_info pointer, and alloc/free
fs_info->compr_wsm[BTRFS_COMPRESS_ZSTD] pointer.
- Add btrfs_alloc_compress_wsm() and btrfs_free_compress_wsm()
Those are helpers allocating the workspace managers for all
algorithms.
For now only zstd is supported, and the timing is a little unusual,
the btrfs_alloc_compress_wsm() should only be called after the
sectorsize being initialized.
Meanwhile btrfs_free_fs_info_compress() is called in
btrfs_free_fs_info().
- Move the definition of btrfs_compression_type to "fs.h"
The reason is that "compression.h" has already included "fs.h", thus
we can not just include "compression.h" to get the definition of
BTRFS_NR_COMPRESS_TYPES to define fs_info::compr_wsm[].
For now the per-fs zstd workspace manager won't really have any effect,
and all compression is still going through the global workspace manager.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're almost done cleaning misused int/bool parameters. Convert a bunch
of them, found by manual grepping. Note that btrfs_sync_fs() needs an
int as it's mandated by the struct super_operations prototype.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we manually check the block size against 3 different values:
- 4K
- PAGE_SIZE
- MIN_BLOCKSIZE
Those 3 values can match or differ from each other. This makes it
pretty complex to output the supported block sizes.
Considering we're going to add block size > page size support soon, this
can make the support block size sysfs attribute much harder to
implement.
To make it easier, factor out a helper, btrfs_supported_blocksize() to
do a simple check for the block size.
Then utilize it in the two locations:
- btrfs_validate_super()
This is very straightforward
- supported_sectorsizes_show()
Iterate through all valid block sizes, and only output supported ones.
This is to make future full range block sizes support much easier.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
extent_buffers are global and shared so their pages should not belong to
any particular cgroup (currently whichever cgroups happens to allocate the
extent_buffer).
Btrfs tree operations should not arbitrarily block on cgroup reclaim or
have the shared extent_buffer pages on a cgroup's reclaim lists.
Link: https://lkml.kernel.org/r/2ee99832619a3fdfe80bf4dc9760278662d2d746.1755812945.git.boris@bur.io
Signed-off-by: Boris Burkov <boris@bur.io>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Tested-by: syzbot@syzkaller.appspotmail.com
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Updates for the kernel's CRC (cyclic redundancy check) code:
- Reorganize the architecture-optimized CRC code. It now lives in
lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/, and it is no
longer artificially split into separate generic and arch modules.
This allows better inlining and dead code elimination. The generic
CRC code is also no longer exported, simplifying the API. (This
mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request.)
- Improve crc32c() performance on newer x86_64 CPUs on long messages
by enabling the VPCLMULQDQ optimized code.
- Simplify the crypto_shash wrappers for crc32_le() and crc32c().
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code.
- Remove unused and obsolete drivers for hardware CRC engines.
- Remove CRC-32 combination functions that are no longer used.
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c().
- Convert the crc32() macro to an inline function.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ8rRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3yOAP9OuoCirD42ZHNSgQeGTzhhZ2jCHiPN
BPvHChwtE2MSRwEA0ddNX36aOiEKmpjog3TMllOIBz7wBrwZV7KgoX75+AU=
=uAY8
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
It's just a simple wrapper around btrfs_clear_extent_bit() that passes a
NULL for its last argument (a cached extent state record), plus there is
not counter part - we have a btrfs_set_extent_bit() but we do not have a
btrfs_set_extent_bits() (plural version). So just remove it and make all
callers use btrfs_clear_extent_bit() directly.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So far we've been deriving the buffer tree index using the sector size.
But each extent buffer covers multiple sectors. This makes the buffer
tree rather sparse.
For example the typical and quite common configuration uses sector size
of 4KiB and node size of 16KiB. In this case it means the buffer tree is
using up to the maximum of 25% of it's slots. Or in other words at least
75% of the tree slots are wasted as never used.
We can score significant memory savings on the required tree nodes by
indexing the tree using the node size instead. As a result far less
slots are wasted and the tree can now use up to all 100% of it's slots
this way.
Note: This works even with unaligned tree blocks as we can still get
unique index by doing eb->start >> nodesize_shift.
Getting some stats from running fio write test, there is a bit of
variance. The values presented in the table below are medians from 5
test runs. The numbers are:
- # of allocated ebs in the tree
- # of leaf tree nodes
- highest index in the tree (radix tree width)):
ebs / leaves / Index | bare for-next | with fix
---------------------+--------------------+-------------------
post mount | 16 / 11 / 10e5c | 16 / 10 / 4240
post test | 5810 / 891 / 11cfc | 4420 / 252 / 473a
post rm | 574 / 300 / 10ef0 | 540 / 163 / 46e9
In this case (10GiB filesystem) the height of the tree is still 3 levels
but the 4x width reduction is clearly visible as expected. But since the
tree is more dense we can see the 54-72% reduction of leaf nodes. That's
very close to ideal with this test. It means the tree is getting really
dense with this kind of workload.
Also, the fio results show no performance change.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although btrfs is not yet implementing blk_holder_ops, there is a
requirement for proper blk_holder_ops:
- blkdev_put() must not be called under sb->s_umount
The blkdev_put()/bdev_fput() must not be called under sb->s_umount to
avoid lock order reversal with disk->open_mutex.
This is for the proper blk_holder_ops callbacks.
Currently we're fine because we call regular fput() which defers the
blk holder reclaiming.
To prepare for the future of blk_holder_ops, move the
btrfs_close_devices() calls into btrfs_free_fs_info().
That will be called from kill_sb() callbacks, which is also called for
error handing during mount failures, or there is already an existing
super block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used anymore after commit 0913445082 ("btrfs: qgroup: use
qgroup_iterator in qgroup_convert_meta()"), so remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an exported function and therefore it should have a 'btrfs_'
prefix, to make it clear it's btrfs specific, avoid future name collisions
with code outside btrfs, and make its naming consistent with most other
btrfs exported functions.
So add a 'btrfs_' prefix to it and make it return bool instead of int,
since all we need is to return true or false.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our message helpers accept NULL for the fs_info in the context that does
not provide and print the common header of the message. The use of pr_*
helpers is only for special reasons, like module loading, device
scanning or multi-line output (print-tree).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The RCU protection is now done in the plain helpers, we can remove the
"_in_rcu" and "_rl_in_rcu".
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a block group dedicated for data relocation on mount of a zoned
filesystem.
If there is already more than one empty DATA block group on mount, this
one is picked for the data relocation block group, instead of a newly
created one.
This is done to ensure, there is always space for performing garbage
collection and the filesystem is not hitting ENOSPC under heavy overwrite
workloads.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To determine whether the crc32c implementation is "fast", use
crc32_optimizations() instead of parsing the crypto_shash driver name.
This keeps the code working as intended after the driver name is changed
by the next commit.
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20250613183753.31864-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree.
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Longxing Li <coregee2000@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reported an assertion failure due to an attempt to add a delayed
iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info
state:
WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Modules linked in:
CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Workqueue: btrfs-endio-write btrfs_work_helper
RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Code: 4e ad 5d (...)
RSP: 0018:ffffc9000213f780 EFLAGS: 00010293
RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00
RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c
R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001
R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100
FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635
btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312
btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
This can happen due to a race with the async reclaim worker like this:
1) The async metadata reclaim worker enters shrink_delalloc(), which calls
btrfs_start_delalloc_roots() with an nr_pages argument that has a value
less than LONG_MAX, and that in turn enters start_delalloc_inodes(),
which sets the local variable 'full_flush' to false because
wbc->nr_to_write is less than LONG_MAX;
2) There it finds inode X in a root's delalloc list, grabs a reference for
inode X (with igrab()), and triggers writeback for it with
filemap_fdatawrite_wbc(), which creates an ordered extent for inode X;
3) The unmount sequence starts from another task, we enter close_ctree()
and we flush the workqueue fs_info->endio_write_workers, which waits
for the ordered extent for inode X to complete and when dropping the
last reference of the ordered extent, with btrfs_put_ordered_extent(),
when we call btrfs_add_delayed_iput() we don't add the inode to the
list of delayed iputs because it has a refcount of 2, so we decrement
it to 1 and return;
4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which
runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT
in the fs_info state;
5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now
calls btrfs_add_delayed_iput() for inode X and there we trigger an
assertion failure since the fs_info state has the flag
BTRFS_FS_STATE_NO_DELAYED_IPUT set.
Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for
the async reclaim workers to finish, after we call cancel_work_sync() for
them at close_ctree(), and by running delayed iputs after wait for the
reclaim workers to finish and before setting the bit.
This race was recently introduced by commit 19e60b2a95 ("btrfs: add
extra warning if delayed iput is added when it's not allowed"). Without
the new validation at btrfs_add_delayed_iput(), this described scenario
was safe because close_ctree() later calls btrfs_commit_super(). That
will run any final delayed iputs added by reclaim workers in the window
between the btrfs_run_delayed_iputs() and the the reclaim workers being
shut down.
Reported-by: syzbot+0ed30ad435bf6f5b7a42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6840481c.a00a0220.d4325.000c.GAE@google.com/T/#u
Fixes: 19e60b2a95 ("btrfs: add extra warning if delayed iput is added when it's not allowed")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a warning for leaked delayed_nodes when putting a root. We currently
do this for inodes, but not delayed_nodes.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When writing super blocks, at write_dev_supers(), we log an error message
when we get some error but we don't show which error we got and we have
that information. So enhance the error messages with the error codes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to add a dedicated block_rsv for tree-log, because the block_rsv
serves for a tree node allocation in btrfs_alloc_tree_block(). Currently,
tree-log tree uses fs_info->empty_block_rsv, which is shared across trees
and points to the normal metadata space_info. Instead, we add a dedicated
block_rsv and that block_rsv can use the dedicated sub-space_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is introduced by commit a512bbf855 ("Btrfs: superblock
duplication") at the beginning of btrfs.
It leaved a comment saying we'd need a special mount option to read all
super blocks, but it's never been implemented and there was not
need/request for it. The check/rescue tools are able to start from a
specific copy and use it as primary eventually.
This means btrfs_read_dev_super() is always reading the first super
block, making all the code finding the latest super block unnecessary.
Just remove that function and replace all call sites with
btrfs_read_disk_super(bdev, 0, false).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two functions to read a super block from a block device:
- btrfs_read_dev_one_super()
Exported from disk-io.c
- btrfs_read_disk_super()
Local to volumes.c
And they have some minor differences:
- btrfs_read_dev_one_super() uses @copy_num
Meanwhile btrfs_read_disk_super() relies on the physical and expected
bytenr passed from the caller.
The parameter list of btrfs_read_dev_one_super() is more user
friendly.
- btrfs_read_disk_super() makes sure the label is NUL terminated
We do not need two different functions doing the same job, so merge the
behavior into btrfs_read_disk_super() by:
- Remove btrfs_read_dev_one_super()
- Export btrfs_read_disk_super()
The name pairs with btrfs_release_disk_super() perfectly.
- Change the parameter list of btrfs_read_disk_super() to mimic
btrfs_read_dev_one_super()
All existing callers are calculating the physical address and expect
bytenr before calling btrfs_read_disk_super() already.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to fully utilize xarray tagging to improve writeback we need to
convert the buffer_radix to a proper xarray. This conversion is
relatively straightforward as the radix code uses the xarray underneath.
Using xarray directly allows for quite a lot less code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use the "btrfs-" prefix for our workqueues, the discard has
underscore instead of dash, so unify it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type blk_status_t is from block layer and not related to checksums
in our context. Use int internally and do the conversions to blk_status_t
as needed in btrfs_bio_csum().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the helper makes it a bit more clear that we're accessing the
first list entry.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the conditional warning instead of typing the whole condition.
Optional message is printed where it seems clear what could be the
problem.
Conversion is left out in btree_csum_one_bio() because of the additional
condition.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using physical address has the following advantages:
- All involved callers only need a single pointer
Instead of the old @folio + @offset pair.
- No complex poking into the bio_vec structure
As a bio_vec can be single or multiple paged, grabbing the real page
can be quite complex if the bio_vec is a multi-page one.
Instead bvec_phys() will always give a single physical address, and it
cab be easily converted to a page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename all the exported functions from extent_map.h that don't have a
'btrfs_' prefix in their names, so that they are consistent with all the
other functions, to make it clear they are btrfs specific functions and
to avoid potential name collisions in the future with functions defined
elsewhere in the kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an exported function so it should have a 'btrfs_' prefix by
convention, to make it clear it's btrfs specific and to avoid collisions
with functions from elsewhere in the kernel.
Rename the function to add 'btrfs_' prefix to it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their name to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their name to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel. One of them has a
double underscore prefix which is also discouraged.
So remove double underscore prefix where applicable and add a 'btrfs_'
prefix to their name to make it clear they are from btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag is no longer being used. It was added by commit a826d6dcb3
("Btrfs: check items for correctness as we search") but it's no longer
being used after commit f26c923860 ("btrfs: remove reada
infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=HZ/U
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
[BUG]
There is a syzbot report that the ASSERT() inside write_dev_supers() got
triggered:
assertion failed: folio_order(folio) == 0, in fs/btrfs/disk-io.c:3858
------------[ cut here ]------------
kernel BUG at fs/btrfs/disk-io.c:3858!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 6730 Comm: syz-executor378 Not tainted 6.14.0-syzkaller-03565-gf6e0150b2003 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:write_dev_supers fs/btrfs/disk-io.c:3858 [inline]
RIP: 0010:write_all_supers+0x400f/0x4090 fs/btrfs/disk-io.c:4155
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eda/0x3750 fs/btrfs/transaction.c:2528
btrfs_quota_enable+0xfcc/0x21a0 fs/btrfs/qgroup.c:1226
btrfs_ioctl_quota_ctl+0x144/0x1c0 fs/btrfs/ioctl.c:3677
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5ad1f20289
</TASK>
---[ end trace 0000000000000000 ]---
[CAUSE]
Since commit f93ee0df51 ("btrfs: convert super block writes to folio
in write_dev_supers()") and commit c94b7349b8 ("btrfs: convert super
block writes to folio in wait_dev_supers()"), the super block writeback
path is converted to use folio.
Since the original code is using page based interfaces, we have an
"ASSERT(folio_order(folio) == 0);" added to make sure everything is not
changed.
But the folio here is not from any btrfs inode, but from the block
device, and we have no control on the folio order in bdev, the device
can choose whatever folio size they want/need.
E.g. the bdev may even have a block size of multiple pages.
So the ASSERT() is triggered.
[FIX]
The super block writeback path has taken larger folios into
consideration, so there is no need for the ASSERT().
And since commit bc00965dbf ("btrfs: count super block write errors in
device instead of tracking folio error state"), the wait path no longer
checks the folio status but only wait for the folio writeback to finish,
there is nothing requiring the ASSERT() either.
So we can remove both ASSERT()s safely now.
Reported-by: syzbot+34122898a11ab689518a@syzkaller.appspotmail.com
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 2a9bb78cfd ("btrfs: validate system chunk array at
btrfs_validate_super()") introduces a call to validate_sys_chunk_array()
in btrfs_validate_super(), which clobbers the value of ret set earlier.
This has the effect of negating the validity checks done earlier, making
it so btrfs could potentially try to mount invalid filesystems.
Fixes: 2a9bb78cfd ("btrfs: validate system chunk array at btrfs_validate_super()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
