mirror of
https://github.com/torvalds/linux.git
synced 2025-11-01 17:18:25 +02:00
89 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
5472d60c12 |
tracing clean up and fixes for v6.18:
- Have osnoise tracer use memdup_user_nul()
The function osnoise_cpus_write() open codes a kmalloc() and then
a copy_from_user() and then adds a nul byte at the end which is the
same as simply using memdup_user_nul().
- Fix wakeup and irq tracers when failing to acquire calltime
When the wakeup and irq tracers use the function graph tracer for
tracing function times, it saves a timestamp into the fgraph shadow
stack. It is possible that this could fail to be stored. If that
happens, it exits the routine early. These functions also disable
nesting of the operations by incremeting the data "disable" counter.
But if the calltime exits out early, it never increments the counter
back to what it needs to be.
Since there's only a couple of lines of code that does work after
acquiring the calltime, instead of exiting out early, reverse the
if statement to be true if calltime is acquired, and place the code
that is to be done within that if block. The clean up will always
be done after that.
- Fix ring_buffer_map() return value on failure of __rb_map_vma()
If __rb_map_vma() fails in ring_buffer_map(), it does not return
an error. This means the caller will be working against a bad vma
mapping. Have ring_buffer_map() return an error when __rb_map_vma()
fails.
- Fix regression of writing to the trace_marker file
A bug fix was made to change __copy_from_user_inatomic() to
copy_from_user_nofault() in the trace_marker write function.
The trace_marker file is used by applications to write into
it (usually with a file descriptor opened at the start of the
program) to record into the tracing system. It's usually used
in critical sections so the write to trace_marker is highly
optimized.
The reason for copying in an atomic section is that the write
reserves space on the ring buffer and then writes directly into
it. After it writes, it commits the event. The time between
reserve and commit must have preemption disabled.
The trace marker write does not have any locking nor can it
allocate due to the nature of it being a critical path.
Unfortunately, converting __copy_from_user_inatomic() to
copy_from_user_nofault() caused a regression in Android.
Now all the writes from its applications trigger the fault that
is rejected by the _nofault() version that wasn't rejected by
the _inatomic() version. Instead of getting data, it now just
gets a trace buffer filled with:
tracing_mark_write: <faulted>
To fix this, on opening of the trace_marker file, allocate
per CPU buffers that can be used by the write call. Then
when entering the write call, do the following:
preempt_disable();
cpu = smp_processor_id();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
This works similarly to seqcount. As it must enabled preemption
to do a copy_from_user() into a per CPU buffer, if it gets
preempted, the buffer could be corrupted by another task.
To handle this, read the number of context switches of the current
CPU, disable migration, enable preemption, copy the data from
user space, then immediately disable preemption again.
If the number of context switches is the same, the buffer
is still valid. Otherwise it must be assumed that the buffer may
have been corrupted and it needs to try again.
Now the trace_marker write can get the user data even if it has
to fault it in, and still not grab any locks of its own.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOfVOhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq6oAP9y+zxuouWjtXIz9/z++aykFgKCkeau
XHSSdJdn4R+AQgEA4SE0UWKH0F6Bg7qwyocahMMQ1tIJRrpihfNrKBUmmQ4=
=wDGp
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing clean up and fixes from Steven Rostedt:
- Have osnoise tracer use memdup_user_nul()
The function osnoise_cpus_write() open codes a kmalloc() and then a
copy_from_user() and then adds a nul byte at the end which is the
same as simply using memdup_user_nul().
- Fix wakeup and irq tracers when failing to acquire calltime
When the wakeup and irq tracers use the function graph tracer for
tracing function times, it saves a timestamp into the fgraph shadow
stack. It is possible that this could fail to be stored. If that
happens, it exits the routine early. These functions also disable
nesting of the operations by incremeting the data "disable" counter.
But if the calltime exits out early, it never increments the counter
back to what it needs to be.
Since there's only a couple of lines of code that does work after
acquiring the calltime, instead of exiting out early, reverse the if
statement to be true if calltime is acquired, and place the code that
is to be done within that if block. The clean up will always be done
after that.
- Fix ring_buffer_map() return value on failure of __rb_map_vma()
If __rb_map_vma() fails in ring_buffer_map(), it does not return an
error. This means the caller will be working against a bad vma
mapping. Have ring_buffer_map() return an error when __rb_map_vma()
fails.
- Fix regression of writing to the trace_marker file
A bug fix was made to change __copy_from_user_inatomic() to
copy_from_user_nofault() in the trace_marker write function. The
trace_marker file is used by applications to write into it (usually
with a file descriptor opened at the start of the program) to record
into the tracing system. It's usually used in critical sections so
the write to trace_marker is highly optimized.
The reason for copying in an atomic section is that the write
reserves space on the ring buffer and then writes directly into it.
After it writes, it commits the event. The time between reserve and
commit must have preemption disabled.
The trace marker write does not have any locking nor can it allocate
due to the nature of it being a critical path.
Unfortunately, converting __copy_from_user_inatomic() to
copy_from_user_nofault() caused a regression in Android. Now all the
writes from its applications trigger the fault that is rejected by
the _nofault() version that wasn't rejected by the _inatomic()
version. Instead of getting data, it now just gets a trace buffer
filled with:
tracing_mark_write: <faulted>
To fix this, on opening of the trace_marker file, allocate per CPU
buffers that can be used by the write call. Then when entering the
write call, do the following:
preempt_disable();
cpu = smp_processor_id();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
This works similarly to seqcount. As it must enabled preemption to do
a copy_from_user() into a per CPU buffer, if it gets preempted, the
buffer could be corrupted by another task.
To handle this, read the number of context switches of the current
CPU, disable migration, enable preemption, copy the data from user
space, then immediately disable preemption again. If the number of
context switches is the same, the buffer is still valid. Otherwise it
must be assumed that the buffer may have been corrupted and it needs
to try again.
Now the trace_marker write can get the user data even if it has to
fault it in, and still not grab any locks of its own.
* tag 'trace-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have trace_marker use per-cpu data to read user space
ring buffer: Propagate __rb_map_vma return value to caller
tracing: Fix irqoff tracers on failure of acquiring calltime
tracing: Fix wakeup tracers on failure of acquiring calltime
tracing/osnoise: Replace kmalloc + copy_from_user with memdup_user_nul
|
||
|
Thorsten Blum
|
f0c029d2ff |
tracing/osnoise: Replace kmalloc + copy_from_user with memdup_user_nul
Replace kmalloc() followed by copy_from_user() with memdup_user_nul() to simplify and improve osnoise_cpus_write(). Remove the manual NUL-termination. No functional changes intended. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20251001130907.364673-2-thorsten.blum@linux.dev Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
21fbefc588 |
tracing updates for v6.18:
- Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall tracepoints Individual system call trace events are pseudo events attached to the raw_syscall trace events that just trace the entry and exit of all system calls. When any of these individual system call trace events get enabled, an element in an array indexed by the system call number is assigned to the trace file that defines how to trace it. When the trace event triggers, it reads this array and if the array has an element, it uses that trace file to know what to write it (the trace file defines the output format of the corresponding system call). The issue is that it uses rcu_dereference_ptr() and marks the elements of the array as using RCU. This is incorrect. There is no RCU synchronization here. The event file that is pointed to has a completely different way to make sure its freed properly. The reading of the array during the system call trace event is only to know if there is a value or not. If not, it does nothing (it means this system call isn't being traced). If it does, it uses the information to store the system call data. The RCU usage here can simply be replaced by READ_ONCE() and WRITE_ONCE() macros. - Have the system call trace events use "0x" for hex values Some system call trace events display hex values but do not have "0x" in front of it. Seeing "count: 44" can be assumed that it is 44 decimal when in actuality it is 44 hex (68 decimal). Display "0x44" instead. - Use vmalloc_array() in tracing_map_sort_entries() The function tracing_map_sort_entries() used array_size() and vmalloc() when it could have simply used vmalloc_array(). - Use for_each_online_cpu() in trace_osnoise.c() Instead of open coding for_each_cpu(cpu, cpu_online_mask), use for_each_online_cpu(). - Move the buffer field in struct trace_seq to the end The buffer field in struct trace_seq is architecture dependent in size, and caused padding for the fields after it. By moving the buffer to the end of the structure, it compacts the trace_seq structure better. - Remove redundant zeroing of cmdline_idx field in saved_cmdlines_buffer() The structure that contains cmdline_idx is zeroed by memset(), no need to explicitly zero any of its fields after that. - Use system_percpu_wq instead of system_wq in user_event_mm_remove() As system_wq is being deprecated, use the new wq. - Add cond_resched() is ftrace_module_enable() Some modules have a lot of functions (thousands of them), and the enabling of those functions can take some time. On non preemtable kernels, it was triggering a watchdog timeout. Add a cond_resched() to prevent that. - Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power of 2 There's code that depends on PID_MAX_DEFAULT being a power of 2 or it will break. If in the future that changes, make sure the build fails to ensure that the code is fixed that depends on this. - Grab mutex_lock() before ever exiting s_start() The s_start() function is a seq_file start routine. As s_stop() is always called even if s_start() fails, and s_stop() expects the event_mutex to be held as it will always release it. That mutex must always be taken in s_start() even if that function fails. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaN/4phQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qpToAP4sENpZkZHFOl2PuikmAgjhB6PqiUtL LNuMDx45WygcLwD6Awy8DUlEBN6RzTPA761MSjs0+NMg16QLrhPLxWqFEgw= =nxDn -----END PGP SIGNATURE----- Merge tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall tracepoints Individual system call trace events are pseudo events attached to the raw_syscall trace events that just trace the entry and exit of all system calls. When any of these individual system call trace events get enabled, an element in an array indexed by the system call number is assigned to the trace file that defines how to trace it. When the trace event triggers, it reads this array and if the array has an element, it uses that trace file to know what to write it (the trace file defines the output format of the corresponding system call). The issue is that it uses rcu_dereference_ptr() and marks the elements of the array as using RCU. This is incorrect. There is no RCU synchronization here. The event file that is pointed to has a completely different way to make sure its freed properly. The reading of the array during the system call trace event is only to know if there is a value or not. If not, it does nothing (it means this system call isn't being traced). If it does, it uses the information to store the system call data. The RCU usage here can simply be replaced by READ_ONCE() and WRITE_ONCE() macros. - Have the system call trace events use "0x" for hex values Some system call trace events display hex values but do not have "0x" in front of it. Seeing "count: 44" can be assumed that it is 44 decimal when in actuality it is 44 hex (68 decimal). Display "0x44" instead. - Use vmalloc_array() in tracing_map_sort_entries() The function tracing_map_sort_entries() used array_size() and vmalloc() when it could have simply used vmalloc_array(). - Use for_each_online_cpu() in trace_osnoise.c() Instead of open coding for_each_cpu(cpu, cpu_online_mask), use for_each_online_cpu(). - Move the buffer field in struct trace_seq to the end The buffer field in struct trace_seq is architecture dependent in size, and caused padding for the fields after it. By moving the buffer to the end of the structure, it compacts the trace_seq structure better. - Remove redundant zeroing of cmdline_idx field in saved_cmdlines_buffer() The structure that contains cmdline_idx is zeroed by memset(), no need to explicitly zero any of its fields after that. - Use system_percpu_wq instead of system_wq in user_event_mm_remove() As system_wq is being deprecated, use the new wq. - Add cond_resched() is ftrace_module_enable() Some modules have a lot of functions (thousands of them), and the enabling of those functions can take some time. On non preemtable kernels, it was triggering a watchdog timeout. Add a cond_resched() to prevent that. - Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power of 2 There's code that depends on PID_MAX_DEFAULT being a power of 2 or it will break. If in the future that changes, make sure the build fails to ensure that the code is fixed that depends on this. - Grab mutex_lock() before ever exiting s_start() The s_start() function is a seq_file start routine. As s_stop() is always called even if s_start() fails, and s_stop() expects the event_mutex to be held as it will always release it. That mutex must always be taken in s_start() even if that function fails. * tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix lock imbalance in s_start() memory allocation failure path tracing: Ensure optimized hashing works ftrace: Fix softlockup in ftrace_module_enable tracing: replace use of system_wq with system_percpu_wq tracing: Remove redundant 0 value initialization tracing: Move buffer in trace_seq to end of struct tracing/osnoise: Use for_each_online_cpu() instead of for_each_cpu() tracing: Use vmalloc_array() to improve code tracing: Have syscall trace events show "0x" for values greater than 10 tracing: Replace syscall RCU pointer assignment with READ/WRITE_ONCE() |
||
|
Wang Liang
|
a2501032de |
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write().
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <tglozar@redhat.com>
Link: https://lore.kernel.org/20250916063948.3154627-1-wangliang74@huawei.com
Fixes:
|
||
|
Fushuai Wang
|
1d67d67a8c |
tracing/osnoise: Use for_each_online_cpu() instead of for_each_cpu()
Replace the opencoded for_each_cpu(cpu, cpu_online_mask) loop with the more readable and equivalent for_each_online_cpu(cpu) macro. Link: https://lore.kernel.org/20250811064158.2456-1-wangfushuai@baidu.com Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Wang Liang
|
c1628c00c4 |
tracing/osnoise: Fix null-ptr-deref in bitmap_parselist()
A crash was observed with the following output:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 #138 PREEMPT(voluntary)
RIP: 0010:bitmap_parselist+0x53/0x3e0
Call Trace:
<TASK>
osnoise_cpus_write+0x7a/0x190
vfs_write+0xf8/0x410
? do_sys_openat2+0x88/0xd0
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, "0-2", 0);
When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return
ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which
trigger the null pointer dereference. Add check for the parameter 'count'.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <tglozar@redhat.com>
Link: https://lore.kernel.org/20250906035610.3880282-1-wangliang74@huawei.com
Fixes:
|
||
|
Tomas Glozar
|
85a3bce695 |
tracing/osnoise: Fix crash in timerlat_dump_stack()
We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit |
||
|
Tomas Glozar
|
17f89102fe |
tracing/osnoise: Allow arbitrarily long CPU string
Allocate kernel memory for processing CPU string (/sys/kernel/tracing/osnoise/cpus) also in osnoise_cpus_write to allow the writing of a CPU string of an arbitrary length. This replaces the 256-byte buffer, which is insufficient with the rising number of CPUs. For example, if I wanted to measure on every even CPU on a system with 256 CPUs, the string would be 456 characters long. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250425091839.343289-1-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
744fab2d9f |
tracing updates for v6.15:
- Add option traceoff_after_boot In order to debug kernel boot, it sometimes is helpful to enable tracing via the kernel command line. Unfortunately, by the time the login prompt appears, the trace is overwritten by the init process and other user space start up applications. Adding a "traceoff_after_boot" will disable tracing when the kernel passes control to init which will allow developers to be able to see the traces that occurred during boot. - Clean up the mmflags macros that display the GFP flags in trace events The macros to print the GFP flags for trace events had a bit of duplication. The code was restructured to remove duplication and in the process it also adds some flags that were missed before. - Removed some dead code and scripts/draw_functrace.py draw_functrace.py hasn't worked in years and as nobody complained about it, remove it. - Constify struct event_trigger_ops The event_trigger_ops is just a structure that has function pointers that are assigned when the variables are created. These variables should all be constants. - Other minor clean ups and fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+V9IhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4RAP9JhE3n69pGuOVaJTN/LGLr2Axl59n4 KqZSZS1nUM76/gD6AxYpR7nxyxgJ7VjNkLptS9tSjJVdPDxGAl0v3eO04w4= =SU30 -----END PGP SIGNATURE----- Merge tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add option traceoff_after_boot In order to debug kernel boot, it sometimes is helpful to enable tracing via the kernel command line. Unfortunately, by the time the login prompt appears, the trace is overwritten by the init process and other user space start up applications. Adding a "traceoff_after_boot" will disable tracing when the kernel passes control to init which will allow developers to be able to see the traces that occurred during boot. - Clean up the mmflags macros that display the GFP flags in trace events The macros to print the GFP flags for trace events had a bit of duplication. The code was restructured to remove duplication and in the process it also adds some flags that were missed before. - Removed some dead code and scripts/draw_functrace.py draw_functrace.py hasn't worked in years and as nobody complained about it, remove it. - Constify struct event_trigger_ops The event_trigger_ops is just a structure that has function pointers that are assigned when the variables are created. These variables should all be constants. - Other minor clean ups and fixes * tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Replace strncpy with memcpy for fixed-length substring copy tracing: Fix synth event printk format for str fields tracing: Do not use PERF enums when perf is not defined tracing: Ensure module defining synth event cannot be unloaded while tracing tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER tracing/osnoise: Fix possible recursive locking for cpus_read_lock() tracing: Align synth event print fmt tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format tracepoint: Print the function symbol when tracepoint_debug is set tracing: Constify struct event_trigger_ops scripts/tracing: Remove scripts/tracing/draw_functrace.py tracing: Update MAINTAINERS file to include tracepoint.c tracing/user_events: Slightly simplify user_seq_show() tracing/user_events: Don't use %pK through printk tracing: gfp: Remove duplication of recording GFP flags tracing: Remove orphaned event_trace_printk ring-buffer: Fix typo in comment about header page pointer tracing: Add traceoff_after_boot option |
||
|
Linus Torvalds
|
88221ac0d5 |
Latency tracing changes for v6.15:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as well as
allows BPF programs to be attached to these locations to extract even more
data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing the
build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the cumulative
model is equivalent to running single components using the same
reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing but
an empty container for other monitors. Controlling the sched monitor
(enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+QhuxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg62AP9bkeNDbiCuAqjZGddV09Hw26wC3yum
kQoNSebD8G52rQEA9GDjK37xGzYwW/fJokhJVTV39qfub6inAJE5dS6WeQY=
=8Ikv
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
||
|
Linus Torvalds
|
a50b4fe095 |
A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff5jQTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoVvRD/wKtuwmiA66NJFgXC0qVq82A6fO3bY8 GBdbfysDJIbqGu5PTcULTbJ8qkqv3jeLUv6CcXvS4sZ7y/uJQl2lzf8yrD/0bbwc rLI6sHiPSZmK93kNVN4X5H7kvt7cE/DYC9nnEOgK3BY5FgKc4n9887d4aVBhL8Lv ODwVXvZ+xi351YCj7qRyPU24zt/p4tkkT1o2k4a0HBluqLI0D+V20fke9IERUL8r d1uWKlcn0TqYDesE8HXKIhbst3gx52rMJrXBJDHwFmG6v8Pj1fkTXCVpPo8QcBz8 OTVkpomN9f/Tx4+GZwhZOF86LhLL3OhxD6pT7JhFCXdmSGv+Ez8uyk1YZysM/XpV Juy/1yAcBpDIDkmhMFGdAAn48Nn9Fotty0r4je60zSEp1d/4QMXcFme29qr2JTUE iWnQ/HD6DxUjVHqy7CYvvo26Xegg1C7qgyOVt4PYZwAM1VKF5P3kzYTb4SAdxtop Tpji1sfW9QV08jqMNo6XntD32DSP9S2HqjO9LwBw700jnx2jjJ35fcJs6iodMOUn gckIZLMn3L0OoglPdyA5O7SNTbKE7aFiRKdnT/cJtR3Fa39Qu27CwC5gfiyuie9I Q+LG8GLuYSBHXAR+PBK4GWlzJ7Dn8k3eqmbnLeKpRMsU6ZzcttgA64xhaviN2wN0 iJbvLJeisXr3GA== =bYAX -----END PGP SIGNATURE----- Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ... |
||
|
Ran Xiaokai
|
7e6b3fcc9c |
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes:
|
||
|
Ankur Arora
|
9fd858cc5a |
osnoise: provide quiescent states
To reduce RCU noise for nohz_full configurations, osnoise depends on cond_resched() providing quiescent states for PREEMPT_RCU=n configurations. For PREEMPT_RCU=y configurations -- where cond_resched() is a stub -- we do this by directly calling rcu_momentary_eqs(). With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), however, we have a configuration with (PREEMPTION=y, PREEMPT_RCU=n) where neither of the above can help. Handle that by providing an explicit quiescent state here for all configurations. As mentioned above this is not needed for non-stubbed cond_resched(), but, providing a quiescent state here just pulls in one that a future cond_resched() would provide, so doesn't cause any extra work for this configuration. Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> |
||
|
Tomas Glozar
|
a065bbf776 |
trace/osnoise: Add trace events for samples
Add trace events that fire at osnoise and timerlat sample generation, in addition to the already existing noise and threshold events. This allows processing the samples directly in the kernel, either with ftrace triggers or with BPF. Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250203090418.1458923-1-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Nam Cao
|
19fec9c443 |
tracing/osnoise: Switch to use hrtimer_setup()
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/all/ff8e6e11df5f928b2b97619ac847b4fa045376a1.1738746821.git.namcao@linutronix.de |
||
|
Linus Torvalds
|
90ab2117f4 |
Runtime verifier and osnoise fixes for 6.14:
- Reset idle tasks on reset for runtime verifier When the runtime verifier is reset, it resets the task's data that is being monitored. But it only iterates for_each_process() which does not include the idle tasks. As the idle tasks can be monitored, they need to be reset as well. - Fix the enabling and disabling of tracepoints in osnoise If timerlat is enabled and the WORKLOAD flag is not set, then the osnoise tracer will enable the migrate task tracepoint to monitor it for its own workload. The test to enable the tracepoint is done against user space modifiable parameters. On disabling of the tracer, those same parameters are used to determine if the tracepoint should be disabled. The problem is if user space were to modify the parameters after it enables the tracer then it may not disable the tracepoint. Instead, a static variable is used to keep track if the tracepoint was enabled or not. Then when the tracer shuts down, it will use this variable to decide to disable the tracepoint or not, instead of looking at the user space parameters. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5UJ1BQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qo46AQDjr1yVTyUmzvxe1bMLDoDOq1xeRMRe 4f8CdpOJRxbi0QEAwnl5Ey9Rvcuy8GFpt/USESr4VYWAN10fvsPx7pkphAs= =RYyn -----END PGP SIGNATURE----- Merge tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull runtime verifier and osnoise fixes from Steven Rostedt: - Reset idle tasks on reset for runtime verifier When the runtime verifier is reset, it resets the task's data that is being monitored. But it only iterates for_each_process() which does not include the idle tasks. As the idle tasks can be monitored, they need to be reset as well. - Fix the enabling and disabling of tracepoints in osnoise If timerlat is enabled and the WORKLOAD flag is not set, then the osnoise tracer will enable the migrate task tracepoint to monitor it for its own workload. The test to enable the tracepoint is done against user space modifiable parameters. On disabling of the tracer, those same parameters are used to determine if the tracepoint should be disabled. The problem is if user space were to modify the parameters after it enables the tracer then it may not disable the tracepoint. Instead, a static variable is used to keep track if the tracepoint was enabled or not. Then when the tracer shuts down, it will use this variable to decide to disable the tracepoint or not, instead of looking at the user space parameters. * tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/osnoise: Fix resetting of tracepoints rv: Reset per-task monitors also for idle tasks |
||
|
Steven Rostedt
|
e3ff424592 |
tracing/osnoise: Fix resetting of tracepoints
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250123204159.4450c88e@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
930d2b32c0 |
tracing: Switch trace_osnoise.c code over to use guard() and __free()
The osnoise_hotplug_workfn() grabs two mutexes and cpu_read_lock(). It has various gotos to handle unlocking them. Switch them over to guard() and let the compiler worry about it. The osnoise_cpus_read() has a temporary mask_str allocated and there's some gotos to make sure it gets freed on error paths. Switch that over to __free() to let the compiler worry about it. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/20241225222931.517329690@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Zheng Yejian
|
49e4154f4b |
tracing: Remove TRACE_EVENT_FL_FILTERED logic
After commit
|
||
|
Wei Li
|
829e0c9f08 |
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-4-liwei391@huawei.com
Fixes:
|
||
|
Wei Li
|
b484a02c9c |
tracing/timerlat: Drop interface_lock in stop_kthread()
stop_kthread() is the offline callback for "trace/osnoise:online", since commit |
||
|
Wei Li
|
0bb0a5c12e |
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
osnoise_hotplug_workfn() is the asynchronous online callback for
"trace/osnoise:online". It may be congested when a CPU goes online and
offline repeatedly and is invoked for multiple times after a certain
online.
This will lead to kthread leak and timer corruption. Add a check
in start_kthread() to prevent this situation.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-2-liwei391@huawei.com
Fixes:
|
||
|
Linus Torvalds
|
067610ebaa |
RCU pull request for v6.12
This pull request contains the following branches:
context_tracking.15.08.24a: Rename context tracking state related
symbols and remove references to "dynticks" in various context
tracking state variables and related helpers; force
context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section.
csd.lock.15.08.24a: Enhance CSD-lock diagnostic reports; add an API
to provide an indication of ongoing CSD-lock stall.
nocb.09.09.24a: Update and simplify RCU nocb code to handle
(de-)offloading of callbacks only for offline CPUs; fix RT
throttling hrtimer being armed from offline CPU.
rcutorture.14.08.24a: Remove redundant rcu_torture_ops get_gp_completed
fields; add SRCU ->same_gp_state and ->get_comp_state
functions; add generic test for NUM_ACTIVE_*RCU_POLL* for
testing RCU and SRCU polled grace periods; add CFcommon.arch
for arch-specific Kconfig options; print number of update types
in rcu_torture_write_types();
add rcutree.nohz_full_patience_delay testing to the TREE07
scenario; add a stall_cpu_repeat module parameter to test
repeated CPU stalls; add argument to limit number of CPUs a
guest OS can use in torture.sh;
rcustall.09.09.24a: Abbreviate RCU CPU stall warnings during CSD-lock
stalls; Allow dump_cpu_task() to be called without disabling
preemption; defer printing stall-warning backtrace when holding
rcu_node lock.
srcu.12.08.24a: Make SRCU gp seq wrap-around faster; add KCSAN checks
for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays; mark idle SRCU-barrier
callbacks to help identify stuck SRCU-barrier callback.
rcu.tasks.14.08.24a: Remove RCU Tasks Rude asynchronous APIs as they
are no longer used; stop testing RCU Tasks Rude asynchronous
APIs; fix access to non-existent percpu regions; check
processor-ID assumptions during chosen CPU calculation for
callback enqueuing; update description of rtp->tasks_gp_seq
grace-period sequence number; add rcu_barrier_cb_is_done()
to identify whether a given rcu_barrier callback is stuck;
mark idle Tasks-RCU-barrier callbacks; add
*torture_stats_print() functions to print detailed
diagnostics for Tasks-RCU variants; capture start time of
rcu_barrier_tasks*() operation to help distinguish a hung
barrier operation from a long series of barrier operations.
rcu_scaling_tests.15.08.24a:
refscale: Add a TINY scenario to support tests of Tiny RCU
and Tiny SRCU; Optimize process_durations() operation;
rcuscale: Dump stacks of stalled rcu_scale_writer() instances;
dump grace-period statistics when rcu_scale_writer() stalls;
mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks; print detailed grace-period and barrier diagnostics
on rcu_scale_writer() hangs for Tasks-RCU variants; warn if
async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude;
make all writer tasks report upon hang; tolerate repeated
GFP_KERNEL failure in rcu_scale_writer(); use special allocator
for rcu_scale_writer(); NULL out top-level pointers to heap
memory to avoid double-free bugs on modprobe failures; maintain
per-task instead of per-CPU callbacks count to avoid any issues
with migration of either tasks or callbacks; constify struct
ref_scale_ops.
fixes.12.08.24a: Use system_unbound_wq for kfree_rcu work to avoid
disturbing isolated CPUs.
misc.11.08.24a: Warn on unexpected rcu_state.srs_done_tail state;
Better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines; annotate struct
kvfree_rcu_bulk_data with __counted_by().
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZt8+8wAKCRAAHS7/6Z0w
pTqoAPwPN//tlEoJx2PRs6t0q+nD1YNvnZawPaRmdzgdM8zJogD+PiSN+XhqRr80
jzyvMDU4Aa0wjUNP3XsCoaCxo7L/lQk=
=bZ9z
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
||
|
Steven Rostedt
|
af17814334 |
tracing/osnoise: Fix build when timerlat is not enabled
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Helena Anna" <helena.anna.dubel@intel.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
5bfbcd1ee5 |
tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.
Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.
Remove unneeded "return;" in stop_kthread().
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
e6a53481da |
tracing/timerlat: Only clear timer if a kthread exists
The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.
Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.
Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
177e1cc2f4 |
tracing/osnoise: Use a cpumask to know what threads are kthreads
The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:
while true; do
rtla timerlat top -u -q & PID=$!;
sleep 5;
kill -INT $PID;
sleep 0.001;
kill -TERM $PID;
wait $PID;
done
Causing the following OOPS:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:hrtimer_active+0x58/0x300
Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x154/0x230
? asm_exc_general_protection+0x26/0x30
? hrtimer_active+0x58/0x300
? __pfx_mutex_lock+0x10/0x10
? __pfx_locks_remove_file+0x10/0x10
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x8e/0x1f0
? security_file_release+0x43/0x80
__fput+0x372/0xb10
task_work_run+0x11e/0x1f0
? _raw_spin_lock+0x85/0xe0
? __pfx_task_work_run+0x10/0x10
? poison_slab_object+0x109/0x170
? do_exit+0x7a0/0x24b0
do_exit+0x7bd/0x24b0
? __pfx_migrate_enable+0x10/0x10
? __pfx_do_exit+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x64/0x140
? _raw_spin_lock_irq+0x86/0xe0
do_group_exit+0xb0/0x220
get_signal+0x17ba/0x1b50
? vfs_read+0x179/0xa40
? timerlat_fd_read+0x30b/0x9d0
? __pfx_get_signal+0x10/0x10
? __pfx_timerlat_fd_read+0x10/0x10
arch_do_signal_or_restart+0x8c/0x570
? __pfx_arch_do_signal_or_restart+0x10/0x10
? vfs_read+0x179/0xa40
? ksys_read+0xfe/0x1d0
? __pfx_ksys_read+0x10/0x10
syscall_exit_to_user_mode+0xbc/0x130
do_syscall_64+0x74/0x110
? __pfx___rseq_handle_notify_resume+0x10/0x10
? __pfx_ksys_read+0x10/0x10
? fpregs_restore_userregs+0xdb/0x1e0
? fpregs_restore_userregs+0xdb/0x1e0
? syscall_exit_to_user_mode+0x116/0x130
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7ff0070eca9c
Code: Unable to access opcode bytes at 0x7ff0070eca72.
RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
</TASK>
Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
---[ end trace 0000000000000000 ]---
This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.
Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
This was debugged by using the persistent ring buffer:
Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/
Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:
https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes:
|
||
|
Valentin Schneider
|
32a9f26e5e |
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to RCU_WATCHING, replace "dyntick_idle" into "eqs" to drop the dyntick reference. Signed-off-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
||
|
Luis Claudio R. Goncalves
|
c40583e19e |
rtla/osnoise: set the default threshold to 1us
Change the default threshold for osnoise to 1us, so that any noise equal or above this value is recorded. Let the user set a higher threshold if necessary. Link: https://lore.kernel.org/linux-trace-kernel/Zmb-QhiiiI6jM9To@uudg.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Jonathan Corbet <corbet@lwn.net> Suggested-by: Daniel Bristot de Oliveira <bristot@kernel.org> Reviewed-by: Clark Williams <williams@redhat.com> Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
1389358bb0 |
tracing/timerlat: Move hrtimer_init to timerlat_fd open()
Currently, the timerlat's hrtimer is initialized at the first read of
timerlat_fd, and destroyed at close(). It works, but it causes an error
if the user program open() and close() the file without reading.
Here's an example:
# echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options
# echo timerlat > /sys/kernel/debug/tracing/current_tracer
# cat <<EOF > ./timerlat_load.py
# !/usr/bin/env python3
timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r')
timerlat_fd.close();
EOF
# ./taskset -c 0 ./timerlat_load.py
<BOOM>
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:hrtimer_active+0xd/0x50
Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d
RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286
RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08
RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08
R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000
FS: 00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? srso_alias_return_thunk+0x5/0x7f
? avc_has_extended_perms+0x237/0x520
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? hrtimer_active+0xd/0x50
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x48/0xe0
__fput+0xf5/0x290
__x64_sys_close+0x3d/0x80
do_syscall_64+0x60/0x90
? srso_alias_return_thunk+0x5/0x7f
? __x64_sys_ioctl+0x72/0xd0
? srso_alias_return_thunk+0x5/0x7f
? syscall_exit_to_user_mode+0x2b/0x40
? srso_alias_return_thunk+0x5/0x7f
? do_syscall_64+0x6c/0x90
? srso_alias_return_thunk+0x5/0x7f
? exit_to_user_mode_prepare+0x142/0x1f0
? srso_alias_return_thunk+0x5/0x7f
? syscall_exit_to_user_mode+0x2b/0x40
? srso_alias_return_thunk+0x5/0x7f
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f2ffb321594
Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d
RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000
R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003
R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668
</TASK>
CR2: 0000000000000010
---[ end trace 0000000000000000 ]---
Move hrtimer_init to timerlat_fd open() to avoid this problem.
Link: https://lore.kernel.org/linux-trace-kernel/7324dd3fc0035658c99b825204a66049389c56e3.1706798888.git.bristot@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Daniel Bristot de Oliveira
|
e88ed227f6 |
tracing/timerlat: Add user-space interface
Going a step further, we propose a way to use any user-space
workload as the task waiting for the timerlat timer. This is done
via a per-CPU file named osnoise/cpu$id/timerlat_fd file.
The tracef_fd allows a task to open at a time. When a task reads
the file, the timerlat timer is armed for future osnoise/timerlat_period_us
time. When the timer fires, it prints the IRQ latency and
wakes up the user-space thread waiting in the timerlat_fd.
The thread then starts to run, executes the timerlat measurement, prints
the thread scheduling latency and returns to user-space.
When the thread rereads the timerlat_fd, the tracer will print the
user-ret(urn) latency, which is an additional metric.
This additional metric is also traced by the tracer and can be used, for
example of measuring the context switch overhead from kernel-to-user and
user-to-kernel, or the response time for an arbitrary execution in
user-space.
The tracer supports one thread per CPU, the thread must be pinned to
the CPU, and it cannot migrate while holding the timerlat_fd. The reason
is that the tracer is per CPU (nothing prohibits the tracer from
allowing migrations in the future). The tracer monitors the migration
of the thread and disables the tracer if detected.
The timerlat_fd is only available for opening/reading when timerlat
tracer is enabled, and NO_OSNOISE_WORKLOAD is set.
The simplest way to activate this feature from user-space is:
-------------------------------- %< -----------------------------------
int main(void)
{
char buffer[1024];
int timerlat_fd;
int retval;
long cpu = 0; /* place in CPU 0 */
cpu_set_t set;
CPU_ZERO(&set);
CPU_SET(cpu, &set);
if (sched_setaffinity(gettid(), sizeof(set), &set) == -1)
return 1;
snprintf(buffer, sizeof(buffer),
"/sys/kernel/tracing/osnoise/per_cpu/cpu%ld/timerlat_fd",
cpu);
timerlat_fd = open(buffer, O_RDONLY);
if (timerlat_fd < 0) {
printf("error opening %s: %s\n", buffer, strerror(errno));
exit(1);
}
for (;;) {
retval = read(timerlat_fd, buffer, 1024);
if (retval < 0)
break;
}
close(timerlat_fd);
exit(0);
}
-------------------------------- >% -----------------------------------
When disabling timerlat, if there is a workload holding the timerlat_fd,
the SIGKILL will be sent to the thread.
Link: https://lkml.kernel.org/r/69fe66a863d2792ff4c3a149bf9e32e26468bb3a.1686063934.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: William White <chwhite@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Daniel Bristot de Oliveira
|
cb7ca871c8 |
tracing/osnoise: Skip running osnoise if all instances are off
In the case of all tracing instances being off, sleep for the entire period. Q: Why not kill all threads so? A: It is valid and useful to start the threads with tracing off. For example, rtla disables tracing, starts the tracer, applies the scheduling setup to the threads, e.g., sched priority and cgroup, and then begin tracing with all set. Skipping the period helps to speed up rtla setup and save the trace after a stop tracing. Link: https://lkml.kernel.org/r/aa4dd9b7e76fcb63901fe5407e15ec002b318599.1686063934.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: William White <chwhite@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
4998e7fda1 |
tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable
Currently, osnoise/timerlat threads run with PF_NO_SETAFFINITY set. It works well, however, cgroups do not allow PF_NO_SETAFFINITY threads to be accepted, and this creates a limitation to osnoise/timerlat. To avoid this limitation, disable migration of the threads as soon as they start to run, and then clean the PF_NO_SETAFFINITY flag (still) used during thread creation. If for some reason a thread migration is requested, e.g., via sched_settafinity, the tracer thread will notice and exit. Link: https://lkml.kernel.org/r/8ba8bc9c15b3ea40cf73cf67a9bc061a264609f0.1686063934.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: William White <chwhite@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
632478a058 |
tracing/timerlat: Always wakeup the timerlat thread
While testing rtla timerlat auto analysis, I reach a condition where
the interface was not receiving tracing data. I was able to manually
reproduce the problem with these steps:
# echo 0 > tracing_on # disable trace
# echo 1 > osnoise/stop_tracing_us # stop trace if timerlat irq > 1 us
# echo timerlat > current_tracer # enable timerlat tracer
# sleep 1 # wait... that is the time when rtla
# apply configs like prio or cgroup
# echo 1 > tracing_on # start tracing
# cat trace
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# ||||| ACTIVATION
# TASK-PID CPU# ||||| TIMESTAMP ID CONTEXT LATENCY
# | | | ||||| | | | |
NOTHING!
Then, trying to enable tracing again with echo 1 > tracing_on resulted
in no change: the trace was still not tracing.
This problem happens because the timerlat IRQ hits the stop tracing
condition while tracing is off, and do not wake up the timerlat thread,
so the timerlat threads are kept sleeping forever, resulting in no
trace, even after re-enabling the tracer.
Avoid this condition by always waking up the threads, even after stopping
tracing, allowing the tracer to return to its normal operating after
a new tracing on.
Link: https://lore.kernel.org/linux-trace-kernel/1ed8f830638b20a39d535d27d908e319a9a3c4e2.1683822622.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
5dfb75e842 |
RCU Changes for 6.4:
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
||
|
Uladzislau Rezki (Sony)
|
cae16f2c2e |
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
The kvfree_rcu() macro's single-argument form is deprecated. Therefore switch to the new kvfree_rcu_mightsleep() variant. The goal is to avoid accidental use of the single-argument forms, which can introduce functionality bugs in atomic contexts and latency bugs in non-atomic contexts. Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> |
||
|
Daniel Bristot de Oliveira
|
d3cba7f02c |
tracing/osnoise: Fix notify new tracing_max_latency
osnoise/timerlat tracers are reporting new max latency on instances
where the tracing is off, creating inconsistencies between the max
reported values in the trace and in the tracing_max_latency. Thus
only report new tracing_max_latency on active tracing instances.
Link: https://lkml.kernel.org/r/ecd109fde4a0c24ab0f00ba1e9a144ac19a91322.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Daniel Bristot de Oliveira
|
b9f451a902 |
tracing/timerlat: Notify new max thread latency
timerlat is not reporting a new tracing_max_latency for the thread
latency. The reason is that it is not calling notify_new_max_latency()
function after the new thread latency is sampled.
Call notify_new_max_latency() after computing the thread latency.
Link: https://lkml.kernel.org/r/16e18d61d69073d0192ace07bf61e405cca96e9c.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Tom Rix
|
7a025e066e |
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
smatch reports several similar warnings kernel/trace/trace_osnoise.c:220:1: warning: symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:243:1: warning: symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:335:14: warning: symbol 'interface_lock' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2242:5: warning: symbol 'timerlat_min_period' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2243:5: warning: symbol 'timerlat_max_period' was not declared. Should it be static? These variables are only used in trace_osnoise.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Davidlohr Bueso
|
b18c58af29 |
tracing/osnoise: No need for schedule_hrtimeout range
No slack time is being passed, just use schedule_hrtimeout(). Link: https://lore.kernel.org/linux-trace-kernel/20230123234649.17968-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Chuang Wang
|
685b64e4d6 |
tracing/osnoise: Use built-in RCU list checking
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence false lockdep
warning when CONFIG_PROVE_RCU_LIST is enabled.
Execute as follow:
[tracing]# echo osnoise > current_tracer
[tracing]# echo 1 > tracing_on
[tracing]# echo 0 > tracing_on
The trace_types_lock is held when osnoise_tracer_stop() or
timerlat_tracer_stop() are called in the non-RCU read side section.
So, pass lockdep_is_held(&trace_types_lock) to silence false lockdep
warning.
Link: https://lkml.kernel.org/r/20221227023036.784337-1-nashuiliang@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
|
||
|
Daniel Bristot de Oliveira
|
b5dce20025 |
tracing/osnoise: Add preempt and/or irq disabled options
The osnoise workload runs with preemption and IRQs enabled in such a way as to allow all sorts of noise to disturb osnoise's execution. hwlat tracer has a similar workload but works with irq disabled, allowing only NMIs and the hardware to generate noise. While thinking about adding an options file to hwlat tracer to allow the system to panic, and other features I was thinking to add, like having a tracepoint at each noise detection, it came to my mind that is easier to make osnoise and also do hardware latency detection than making hwlat "feature compatible" with osnoise. Other points are: - osnoise already has an independent cpu file. - osnoise has a more intuitive interface, e.g., runtime/period vs. window/width (and people often need help remembering what it is). - osnoise: tracepoints - osnoise stop options - osnoise options file itself Moreover, the user-space side (in rtla) is simplified by reusing the existing osnoise code. Finally, people have been asking me about using osnoise for hw latency detection, and I have to explain that it was sufficient but not necessary. These options make it sufficient and necessary. Adding a Suggested-by Clark, as he often asked me about this possibility. Link: https://lkml.kernel.org/r/d9c6c19135497054986900f94c8e47410b15316a.1670623111.git.bristot@kernel.org Cc: Suggested-by: Clark Williams <williams@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
1603dda477 |
tracing/osnoise: Add PANIC_ON_STOP option
Often the latency observed in a CPU is not caused by the work being done in the CPU itself, but by work done on another CPU that causes the hardware to stall all CPUs. In this case, it is interesting to know what is happening on ALL CPUs, and the best way to do this is via crash dump analysis. Add the PANIC_ON_STOP option to osnoise/timerlat tracers. The default behavior is having this option off. When enabled by the user, the system will panic after hitting a stop tracing condition. This option was motivated by a real scenario that Juri Lelli and I were debugging. Link: https://lkml.kernel.org/r/249ce4287c6725543e6db845a6e0df621dc67db5.1670623111.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
ec370890f9 |
tracing/osnoise: Make osnoise_options static
Make osnoise_options static, as reported by the kernel test robot. Link: https://lkml.kernel.org/r/63255826485400d7a2270e9c5e66111079671e7a.1670228712.git.bristot@kernel.org Reported-by: kernel test robot <lkp@intel.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
30838fcd81 |
tracing/osnoise: Add OSNOISE_WORKLOAD option
The osnoise tracer is not only a tracer, and a set of tracepoints,
but also a workload dispatcher.
In preparation for having other workloads, e.g., in user-space,
add an option to avoid dispatching the workload.
By not dispatching the workload, the osnoise: tracepoints become
generic events to measure the execution time of *any* task on Linux.
For example:
# cd /sys/kernel/tracing/
# cat osnoise/options
DEFAULTS OSNOISE_WORKLOAD
# echo NO_OSNOISE_WORKLOAD > osnoise/options
# cat osnoise/options
NO_DEFAULTS NO_OSNOISE_WORKLOAD
# echo osnoise > set_event
# echo osnoise > current_tracer
# tail -8 trace
make-94722 [002] d..3. 1371.794507: thread_noise: make:94722 start 1371.794302286 duration 200897 ns
sh-121042 [020] d..3. 1371.794534: thread_noise: sh:121042 start 1371.781610976 duration 8943683 ns
make-121097 [005] d..3. 1371.794542: thread_noise: make:121097 start 1371.794481522 duration 60444 ns
<...>-40 [005] d..3. 1371.794550: thread_noise: migration/5:40 start 1371.794542256 duration 7154 ns
<idle>-0 [018] dNh2. 1371.794554: irq_noise: reschedule:253 start 1371.794553547 duration 40 ns
<idle>-0 [018] dNh2. 1371.794561: irq_noise: local_timer:236 start 1371.794556222 duration 4890 ns
<idle>-0 [018] .Ns2. 1371.794563: softirq_noise: SCHED:7 start 1371.794561803 duration 992 ns
<idle>-0 [018] d..3. 1371.794566: thread_noise: swapper/18:0 start 1371.781368110 duration 13191798 ns
In preparation for the rtla exec_time tracer/tool and
rtla osnoise --user option.
Link: https://lkml.kernel.org/r/f5cfbd37aefd419eefe9243b4d2fc38ed5753fe4.1668692096.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Daniel Bristot de Oliveira
|
b179d48b6a |
tracing/osnoise: Add osnoise/options file
Add the tracing/osnoise/options file to control osnoise/timerlat tracer features. It is a single file to contain multiple features, similar to the sched/features file. Reading the file displays a list of options. Writing the OPTION_NAME enables it, writing NO_OPTION_NAME disables it. The DEAFULTS is a particular option that resets the options to the default ones. It uses a bitmask to keep track of the status of the option. When needed, we can add a list of static keys, but for now it does not justify the memory increase. Link: https://lkml.kernel.org/r/f8d34aefdb225d2603fcb4c02a120832a0cd3339.1668692096.git.bristot@kernel.org Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
022632f6c4 |
tracing/osnoise: Fix duration type
The duration type is a 64 long value, not an int. This was
causing some long noise to report wrong values.
Change the duration to a 64 bits value.
Link: https://lkml.kernel.org/r/a93d8a8378c7973e9c609de05826533c9e977939.1668692096.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes:
|
||
|
Nico Pache
|
99ee9317a1 |
tracing/osnoise: Fix possible recursive locking in stop_per_cpu_kthreads
There is a recursive lock on the cpu_hotplug_lock.
In kernel/trace/trace_osnoise.c:<start/stop>_per_cpu_kthreads:
- start_per_cpu_kthreads calls cpus_read_lock() and if
start_kthreads returns a error it will call stop_per_cpu_kthreads.
- stop_per_cpu_kthreads then calls cpus_read_lock() again causing
deadlock.
Fix this by calling cpus_read_unlock() before calling
stop_per_cpu_kthreads. This behavior can also be seen in commit
|
||
|
Linus Torvalds
|
76bfd3de34 |
tracing updates for 5.19:
- The majority of the changes are for fixes and clean ups.
Noticeable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to having it
embedded in initram). This is useful for embedded boards without initram
disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use more than
59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset>
instead of using the name of the function before it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
=+nDD
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
||
|
Daniel Bristot de Oliveira
|
9c556e5a4d |
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
There is no need to wakeup the timerlat/ thread if stop tracing is hit at the timerlat's IRQ handler. Return before waking up timerlat's thread. Link: https://lkml.kernel.org/r/b392356c91b56aedd2b289513cc56a84cf87e60d.1652175637.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |