Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a random MAC address is not requested during scan request, unicast probe
response frames are only accepted if the destination address matches the
interface address. This works fine for non-ML interfaces. However, with
MLO, the same interface can have multiple links, and a scan on a link would
be requested with the link address. In such cases, the probe response frame
gets dropped which is incorrect.
Therefore, add logic to check if any of the link addresses match the
destination address if the interface address does not match.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-2-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP interface is already beaconing, a subsequent scan is not allowed
unless the user space explicitly sets the flag NL80211_SCAN_FLAG_AP in the
scan request. If this flag is not set, the scan request will be returned
with the error code -EOPNOTSUPP. However, this restriction currently
applies only to non-ML interfaces. For ML interfaces, scans are allowed
without this flag being explicitly set by the user space which is wrong.
This is because the beaconing check currently uses only the deflink, which
does not get set during MLO.
Hence to fix this, during MLO, use the existing helper
ieee80211_num_beaconing_links() to know if any of the link is beaconing.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-1-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, ieee80211_num_beaconing_links() returns 0 when the interface
operates in non-ML mode. However, non-MLO mode is equivalent to having a
single link. Therefore, the function can handle the non-MLO case as well.
This adjustment will also eliminate the need for deflink usage in certain
scenarios.
Hence, implement changes to handle the non-MLO case as well. There is
no change in functionality, and no existing user-visible bug is getting
fixed. This update simply makes the function generic to handle all cases.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/linux-wireless/16499ad8e4b060ee04c8a8b3615fe8952aa7b07b.camel@sipsolutions.net/
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250515-fix_num_beaconing_links-v1-1-4a39e2704314@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Reviewed-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://patch.msgid.link/20250430191042.3287004-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The status code should be type of __le16.
Fixes: 83e897a961 ("wifi: ieee80211: add definitions for negotiated TID to Link map")
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250505081946.3927214-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities
advertised during Association contains information such as EMLSR
transition delay, padding delay and transition timeout values.
Save the EML capabilities information that is received during station
addition and capabilities update in ieee80211_sta so that drivers can use
it for triggering EMLSR operation.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently for MLO, sending out multicast frames on each link is handled by
mac80211 only when IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX flag is not set.
Dynamic VLAN multicast traffic utilizes software encryption.
Due to this, mac80211 should handle transmitting multicast frames on
all links for multicast VLAN traffic.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-4-muna.sinada@oss.qualcomm.com
[remove unnecessary parentheses]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, MLD links for an AP_VLAN interface type is not fully
supported.
Add allocation of separate links for each VLAN interface and copy
chanctx and chandef of AP bss to VLAN where necessary. Separate
links are created because for Dynamic VLAN each link will have its own
default_multicast_key.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-3-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently before iterating through valid links we are utilizing
open-coding when checking if vif valid_links is a non-zero value.
Add new macro, for_each_link_data(), which iterates through link_id
and checks if it is set on vif valid_links. If it is a valid link then
access link data for that link id.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-2-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408092220.2267754-1-julian@outer-limits.org
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 484a54c2e5. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
net/mac80211/spectmgmt.c:151:47: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
net/mac80211/spectmgmt.c:155:48: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SQdHZljwAgIlp9@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
-----BEGIN PGP SIGNATURE-----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=FdK4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a handful of fixes, notably
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
* tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error
wifi: iwlwifi: pcie: set state to no-FW before reset handshake
wifi: wl1251: fix memory leak in wl1251_tx_work
wifi: brcmfmac: fix memory leak in brcmf_get_module_param
wifi: iwlwifi: mld: silence uninitialized variable warning
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()
wifi: at76c50x: fix use after free access in at76_disconnect
wifi: add wireless list to MAINTAINERS
iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled
wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning
wifi: iwlwifi: mld: reduce scope for uninitialized variable
====================
Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit a104042e2b.
Since the original bug seems to have been around for years,
but a new issue was report with the fix, revert the fix for
now. We have a couple of weeks to figure it out for this
release, if needed.
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/linux-wireless/20250410215527.3001-1-spasswolf@web.de
Fixes: a104042e2b ("wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point).
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/ff7849e268562456274213c0476e09481a48f489.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211 skb control block key (set when skb was queued) could have
been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue()
already called ieee80211_tx_h_select_key() to get the current key, but
the latter do not update the key in skb control block in case it is
NULL. Because some drivers actually use this key in their TX callbacks
(e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free
below:
BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c
Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440
CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2
Hardware name: HW (DT)
Workqueue: bat_events batadv_send_outstanding_bcast_packet
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x58/0x74
print_report+0x164/0x4c0
kasan_report+0xac/0xe8
__asan_report_load4_noabort+0x1c/0x24
ath11k_mac_op_tx+0x590/0x61c
ieee80211_handle_wake_tx_queue+0x12c/0x1c8
ieee80211_queue_skb+0xdcc/0x1b4c
ieee80211_tx+0x1ec/0x2bc
ieee80211_xmit+0x224/0x324
__ieee80211_subif_start_xmit+0x85c/0xcf8
ieee80211_subif_start_xmit+0xc0/0xec4
dev_hard_start_xmit+0xf4/0x28c
__dev_queue_xmit+0x6ac/0x318c
batadv_send_skb_packet+0x38c/0x4b0
batadv_send_outstanding_bcast_packet+0x110/0x328
process_one_work+0x578/0xc10
worker_thread+0x4bc/0xc7c
kthread+0x2f8/0x380
ret_from_fork+0x10/0x20
Allocated by task 1906:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_alloc_info+0x3c/0x4c
__kasan_kmalloc+0xac/0xb0
__kmalloc_noprof+0x1b4/0x380
ieee80211_key_alloc+0x3c/0xb64
ieee80211_add_key+0x1b4/0x71c
nl80211_new_key+0x2b4/0x5d8
genl_family_rcv_msg_doit+0x198/0x240
<...>
Freed by task 1494:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_free_info+0x48/0x94
__kasan_slab_free+0x48/0x60
kfree+0xc8/0x31c
kfree_sensitive+0x70/0x80
ieee80211_key_free_common+0x10c/0x174
ieee80211_free_keys+0x188/0x46c
ieee80211_stop_mesh+0x70/0x2cc
ieee80211_leave_mesh+0x1c/0x60
cfg80211_leave_mesh+0xe0/0x280
cfg80211_leave+0x1e0/0x244
<...>
Reset SKB control block key before calling ieee80211_tx_h_select_key()
to avoid that.
Fixes: bb42f2d13f ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
-----BEGIN PGP SIGNATURE-----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=HSDM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a few places in the tree which compute the length of the
string representation of a MAC address as 3 * ETH_ALEN - 1. Define a
constant for this and use it where relevant. No functionality changes
are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://patch.msgid.link/20250312-netconsole-v6-1-3437933e79b8@purestorage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When userspace sets supported rates for a new station via
NL80211_CMD_NEW_STATION, it might send a list that's empty
or contains only invalid values. Currently, we process these
values in sta_link_apply_parameters() without checking the result of
ieee80211_parse_bitrates(), which can lead to an empty rates bitmap.
A similar issue was addressed for NL80211_CMD_SET_BSS in commit
ce04abc3fc ("wifi: mac80211: check basic rates validity").
This patch applies the same approach in sta_link_apply_parameters()
for NL80211_CMD_NEW_STATION, ensuring there is at least one valid
rate by inspecting the result of ieee80211_parse_bitrates().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: b95eb7f0ee ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's some confusing indentation, I thought even that braces
were missing. Fix indentation here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For multi-link reconfiguration, we shouldn't have any BSS
membership selectors that are different from the association.
Track the association selectors and use them to check the new
link(s) added during reconfiguration.
Fixes: 36e05b0b83 ("wifi: mac80211: Support dynamic link addition and removal")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250311121004.771de0c36a75.I72f87d048c8693919b99dd9d4eee39833f06d15f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The MPDU length is only configured using the EHT capabilities element on
2.4 GHz. On 5/6 GHz it is configured using the VHT or HE capabilities
respectively.
Fixes: cf00792797 ("wifi: mac80211: parse A-MSDU len from EHT capabilities")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250311121704.0634d31f0883.I28063e4d3ef7d296b7e8a1c303460346a30bf09c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the multi-link reconfiguration frame, the per-STA profile for
added links shouldn't include the multi-link element. Set the
association ID to an invalid value, so it doesn't erroneously
match the link ID if that happens to be zero.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.8e5be244c70f.I3472cd5c347814ee3600869a88488997bcd43224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If disconnecting while ML reconfiguration is in progress,
the data isn't freed because the reset call is too late,
after the vif already switches to non-MLD. Move the call
to fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.abaea69cde42.I7e6b35731ded94fc2d68a2d4ecf81873712c268e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If multi-link reconfiguration fails, we can disconnect with a local link
already allocated but the BSS entry not assigned yet, which leads to a
warning in cfg80211. Add a check to avoid the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.699bd9cbabe5.I599d5ff69092a65e916e2acd25137ae9df8debe8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Spotted during code review, the selectors need to be large
enough for a 128-bit bitmap, not a single unsigned long,
otherwise we have stack corruption.
We should also allow passing selectors from userspace, but
that should be a separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.8f1bcf96a504.Ibeb8970c82a30c97279a4cc4e68faca5df1813a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If U-APSD isn't enabled by us, then IEEE80211_STA_UAPSD_ENABLED
won't be set, but the AP can still support it in that case. Only
require U-APSD from the AP if we enabled it, don't require it to
be disabled on the AP if we didn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.b4674be12a38.I01959e448c6a2a3e8bc5d561bbae9e8d2cca616a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support passing the value from userspace on to the AP in the
association and ML link reconfiguration requests. We may need
to also add a driver value to or in with the field, but for
now have no feature that is controlled by the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.2e555beb0a76.I623f59023b47ec202fc0c7520f2b5f575b439927@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
