Drop reference to pages from the comment since the function is fully folio
aware and works regardless of how many pages are in the folio. Also while
at it, capitalize the first word and make it more explicit that
release_folio is a callback from struct address_space_operations.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag is set after inserting the eb to the buffer tree and cleared
on it's removal. It was added in commit 34b41acec1 ("Btrfs: use a
bit to track if we're in the radix tree") and wanted to make use of it,
faa2dbf004 ("Btrfs: add sanity tests for new qgroup accounting
code"). Both are 10+ years old, we can remove the flag.
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag was added by commit 656f30dba7 ("Btrfs: be aware of btree
inode write errors to avoid fs corruption") but it stopped being used
after commit 046b562b20 ("btrfs: use a separate end_io handler for
read_extent_buffer").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.
Fixes: c4aec299fa ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we're handling folios from filemap, we can no longer assume all
folios are page sized.
Thus for call sites assuming the folio is page sized, change the
PAGE_SIZE usage to folio_size() instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we can no longer assume page sized folio for data filemap folios,
allow btrfs_alloc_subpage() to accept a new parameter, @fsize,
indicating the folio size.
This doesn't follow the regular behavior of passing a folio directly,
because this function is shared by both data and metadata folios, and
for metadata folios we have extra allocation policy to ensure no large
folios whose sizes are larger than nodesize (unless it's page sized).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support large data folios, we can no longer assume every filemap
folio is page sized.
So btrfs_is_subpage() check must be done against a folio.
Thankfully for metadata folios, we have the full control and ensure a
large folio will not be large than nodesize, so
btrfs_meta_is_subpage() doesn't need this change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inline function btrfs_is_testing() is hardcoded to return 0 if
CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on
the compiler optimizing out the call to alloc_test_extent_buffer() in
btrfs_find_create_tree_block(), as it's not been defined (it's behind an
#ifdef).
Add a stub version of alloc_test_extent_buffer() to avoid linker errors
on non-standard optimization levels. This problem was seen on GCC 14
with -O0 and is helps to see symbols that would be otherwise optimized
out.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[OUT-OF-BAND DIRTY FOLIOS]
An out-of-band folio means the folio is marked dirty but without
notifying the filesystem.
This can lead to various problems, not limited to:
- No folio::private to track per block status
- No proper space reserved for such a dirty folio
[HISTORY IN BTRFS]
This used to be a problem related to get_user_page(), but with the
introduction of pin_user_pages*(), we should no longer hit such
case anymore.
In btrfs, we have a long history of catching such out-of-band dirty
folios by:
- Mark the folio ordered during delayed allocation
- Check the folio ordered flag during writeback
If the folio has no ordered flag, it means it doesn't go through
delayed allocation, thus it's definitely an out-of-band
one.
If we got one, we go through COW fixup, which will re-dirty the folio
with proper handling in another workqueue.
[PROBLEMS OF COW-FIXUP]
Such workaround is a blockage for us to migrate to iomap (it requires
extra flags to trace if a folio is dirtied by the fs or not) and I'd
argue it's not data checksum safe, since if a folio can be marked dirty
without informing the fs, the content can also change at any time.
But with the introduction of pin_user_pages*() during v5.8 merge
window, such out-of-band dirty folio such be treated as a bug.
Ext4 has treated such case by warning and erroring out even before
pin_user_pages*().
Furthermore, there are already proofs that such folio ordered flag
tracking can be screwed up by incorrect error handling, check the commit
messages of the following commits:
06f3642847 ("btrfs: do proper folio cleanup when cow_file_range() failed")
c2b47df81c ("btrfs: do proper folio cleanup when run_delalloc_nocow() failed")
[FIXES]
Unlike btrfs, ext4 and xfs (iomap) never bother handling such
out-of-band dirty folios.
- Ext4 just warns and errors out
- Iomap always follows the folio/block dirty flags
And there is nothing really COW specific, xfs also supports COW too.
Here we take one step towards ext4 by doing warning and erroring out.
But since the cow fixup thing is introduced from the beginning, we keep
the old behavior for non-experimental builds, and only do the new warning
for experimental builds before we're 100% sure and remove cow fixup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since the support of block size (sector size) < page size for btrfs,
test case generic/563 fails with 4K block size and 64K page size:
--- tests/generic/563.out 2024-04-25 18:13:45.178550333 +0930
+++ /home/adam/xfstests-dev/results//generic/563.out.bad 2024-09-30 09:09:16.155312379 +0930
@@ -3,7 +3,8 @@
read is in range
write is in range
write -> read/write
-read is in range
+read has value of 8388608
+read is NOT in range -33792 .. 33792
write is in range
...
[CAUSE]
The test case creates a 8MiB file, then does buffered write into the 8MiB
using 4K block size, to overwrite the whole file.
On 4K page sized systems, since the write range covers the full block and
page, btrfs will not bother reading the page, just like what XFS and EXT4
do.
But on 64K page sized systems, although the 4K sized write is still block
aligned, it's not page aligned anymore, thus btrfs will read the full
page, which will be accounted by cgroup and fail the test.
As the test case itself expects such 4K block aligned write should not
trigger any read.
Such expected behavior is an optimization to reduce folio reads when
possible, and unfortunately btrfs does not implement such optimization.
[FIX]
To skip the full page read, we need to do the following modification:
- Do not trigger full page read as long as the buffered write is block
aligned
This is pretty simple by modifying the check inside
prepare_uptodate_page().
- Skip already uptodate blocks during full page read
Or we can lead to the following data corruption:
0 32K 64K
|///////| |
Where the file range [0, 32K) is dirtied by buffered write, the
remaining range [32K, 64K) is not.
When reading the full page, since [0,32K) is only dirtied but not
written back, there is no data extent map for it, but a hole covering
[0, 64k).
If we continue reading the full page range [0, 64K), the dirtied range
will be filled with 0 (since there is only a hole covering the whole
range).
This causes the dirtied range to get lost.
With this optimization, btrfs can pass generic/563 even if the page size
is larger than fs block size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if btrfs has its block size (the older sector size) smaller
than the page size, btrfs_do_readpage() will handle the range extent by
extent, this is good for performance as it doesn't need to re-lookup the
same extent map again and again.
(Although get_extent_map() already does extra cached em check, thus
the optimization is not that obvious.)
This is totally fine and is a valid optimization, but it has an
assumption that there is no partial uptodate range in the page.
Meanwhile there is an incoming feature, requiring btrfs to skip the full
page read if a buffered write range covers a full block but not a full
page.
In that case, we can have a page that is partially uptodate, and the
current per-extent lookup cannot handle such case.
So here we change btrfs_do_readpage() to do block-by-block read, this
simplifies the following things:
- Remove the need for @iosize variable
Because we just use sectorsize as our increment.
- Remove @pg_offset, and calculate it inside the loop when needed
It's just offset_in_folio().
- Use a for() loop instead of a while() loop
This will slightly reduce the read performance for subpage cases, but for
the future where we need to skip already uptodate blocks, it should still
be worth.
For block size == page size, this brings no performance change.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're using btrfs_lock_and_flush_ordered_range() for both
btrfs_read_folio() and btrfs_readahead(), but it has one critical
problem for future subpage optimizations:
- It will call btrfs_start_ordered_extent() to writeback the involved
folios
But remember we're calling btrfs_lock_and_flush_ordered_range() at
read paths, meaning the folio is already locked by read path.
If we really trigger writeback for those already locked folios, this
will lead to a deadlock and writeback cannot get the folio lock.
Such dead lock is prevented by the fact that btrfs always keeps a
dirty folio also uptodate, by either dirtying all blocks of the folio,
or by reading the whole folio before dirtying.
To prepare for the incoming patch which allows btrfs to skip full folio
read if the buffered write is block aligned, we have to start by solving
the possible deadlock first.
Instead of blindly calling btrfs_start_ordered_extent(), introduce a
new helper, which is smarter in the following ways:
- Only wait and flush the ordered extent if
* The folio doesn't even have private bit set
* Part of the blocks of the ordered extent are not uptodate
This can happen by:
* The folio writeback finished, then got invalidated.
There are a lot of reasons that a folio can get invalidated,
from memory pressure to direct IO (which invalidates all folios
of the range).
But OE not yet finished.
We have to wait for the ordered extent, as the OE may contain
to-be-inserted data checksum.
Without waiting, our read can fail due to the missing checksum.
But either way, the OE should not need any extra flush inside the
locked folio range.
- Skip the ordered extent completely if
* All the blocks are dirty
This happens when OE creation is caused by a folio writeback whose
file offset is before our folio.
E.g. 16K page size and 4K block size
0 8K 16K 24K 32K
|//////////////||///////| |
The writeback of folio 0 created an OE for range [0, 24K), but since
folio 16K is not fully uptodate, a read is triggered for folio 16K.
The writeback will never happen (we're holding the folio lock for
read), nor will the OE finish.
Thus we must skip the range.
* All the blocks are uptodate
This happens when the writeback finished, but OE not yet finished.
Since the blocks are already uptodate, we can skip the OE range.
The new helper lock_extents_for_read() will do a loop for the target
range by:
1) Lock the full range
2) If there is no ordered extent in the remaining range, exit
3) If there is an ordered extent that we can skip
Skip to the end of the OE, and continue checking
We do not trigger writeback nor wait for the OE.
4) If there is an ordered extent that we cannot skip
Unlock the whole extent range and start the ordered extent.
And also update btrfs_start_ordered_extent() to add two more parameters:
@nowriteback_start and @nowriteback_len, to prevent triggering flush for
a certain range.
This will allow us to handle the following case properly in the future:
16K page size, 4K btrfs block size:
0 4K 8K 12K 16K 20K 24K 28K 32K
|/////////////////////////////||////////////////| | |
|<-------------------- OE 2 ------------------->| |< OE 1 >|
The folio has been written back before, thus we have an OE at
[28K, 32K).
Although the OE 1 finished its IO, the OE is not yet removed from IO
tree.
The folio got invalidated after writeback completed and before the
ordered extent finished.
And [16K, 24K) range is dirty and uptodate, caused by a block aligned
buffered write (and future enhancements allowing btrfs to skip full
folio read for such case).
But writeback for folio 0 has began, thus it generated OE 2, covering
range [0, 24K).
Since the full folio 16K is not uptodate, if we want to read the folio,
the existing btrfs_lock_and_flush_ordered_range() will dead lock, by:
btrfs_read_folio()
| Folio 16K is already locked
|- btrfs_lock_and_flush_ordered_range()
|- btrfs_start_ordered_extent() for range [16K, 24K)
|- filemap_fdatawrite_range() for range [16K, 24K)
|- extent_write_cache_pages()
folio_lock() on folio 16K, deadlock.
But now we will have the following sequence:
btrfs_read_folio()
| Folio 16K is already locked
|- lock_extents_for_read()
|- can_skip_ordered_extent() for range [16K, 24K)
| Returned true, the range [16K, 24K) will be skipped.
|- can_skip_ordered_extent() for range [28K, 32K)
| Returned false.
|- btrfs_start_ordered_extent() for range [28K, 32K) with
[16K, 32K) as no writeback range
No writeback for folio 16K will be triggered.
And there will be no more possible deadlock on the same folio.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the helper num_extent_folios() is now __pure, we can use it in for
loop without storing its value in a variable explicitly, the compiler
will do this for us.
The effects on btrfs.ko is -200 bytes and there are stack space savings
too:
btrfs_clone_extent_buffer -8 (32 -> 24)
btrfs_clear_buffer_dirty -8 (48 -> 40)
clear_extent_buffer_uptodate -8 (40 -> 32)
set_extent_buffer_dirty -8 (32 -> 24)
write_one_eb -8 (88 -> 80)
set_extent_buffer_uptodate -8 (40 -> 32)
read_extent_buffer_pages_nowait -16 (64 -> 48)
find_extent_buffer -8 (32 -> 24)
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike folio helpers for date the ones for metadata always take the
extent buffer start and length, so they can be simplified to take the
eb only. The fs_info can be obtained from eb too so it can be dropped
as parameter.
Added in patch "btrfs: use metadata specific helpers to simplify extent
buffer helpers".
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After previous patch removing nodesize from parameters,
__alloc_dummy_extent_buffer() and alloc_dummy_extent_buffer() are
identical so we can drop one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass a valid fs_info so we can read the nodesize from that
instead of passing it as parameter.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have btrfs_meta_is_subpage(), we should make btrfs_is_subpage()
to be data inode specific.
This change involves:
- Simplify btrfs_is_subpage()
Now we only need to do a very simple sectorsize check against
PAGE_SIZE.
And since the function is pretty simple now, just make it an inline
function.
- Add an extra ASSERT() to make sure btrfs_is_subpage() is only called
on data inode mapping
- Migrate btree_csum_one_bio() to use btrfs_meta_folio_*() helpers
- Migrate alloc_extent_buffer() to use btrfs_meta_folio_*() helpers
- Migrate end_bbio_meta_write() to use btrfs_meta_folio_*() helpers
Or we will trigger the ASSERT() due to calling btrfs_folio_*() on
metadata folios.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By using a shared bio_add_folio_nofail() with calculated
range_start/range_len, so no more explicit subpage routine needed.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently inside write_one_eb() we have two different ways of handling
subpage and regular metadata.
The differences are:
- Extra offset/length calculation when adding the folio range to bio for
subpage cases
- Only decrease wbc->nr_to_write if the whole page is no longer dirty
for subpage cases
- Use subpage helper for subpage cases
Merge the tow ways into a shared one:
- Always calculate the to-be-queued range
So that bio_add_folio() can use the same calculated resulted length
and offset for both cases.
- Use btrfs_meta_folio_clear_dirty() and
btrfs_meta_folio_set_writeback() helpers
This will cover both cases.
- Only decrease wbc->nr_to_write if the folio is no longer dirty
Since we have the folio locked, no one else can modify the folio dirty
flags (set_extent_buffer_dirty() will also lock the folio for subpage
cases).
Thus after our btrfs_meta_folio_clear_dirty() call, if the whole folio
is no longer dirty, we're submitting the last dirty eb of the folio,
and can decrease wbc->nr_to_write properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_clear_buffer_dirty() is called on dirty extent buffer
that will not be written back.
The function will call btree_clear_folio_dirty() to clear the folio
dirty flag and also clear PAGECACHE_TAG_DIRTY flag.
And we split the subpage and regular handling, as for subpage cases we
should only clear PAGECACHE_TAG_DIRTY if the last dirty extent buffer in
the page is cleared.
So here we can simplify the function by:
- Use the newly introduced btrfs_meta_folio_clear_and_test_dirty() helper
The helper will return true if we cleared the folio dirty flag.
With that we can use the same helper for both subpage and regular
cases.
- Rename btree_clear_folio_dirty() to btree_clear_folio_dirty_tag()
As we move the folio dirty clearing in the btrfs_clear_buffer_dirty().
- Call btrfs_meta_folio_clear_and_test_dirty() to clear the dirty flags
for both regular and subpage metadata cases
- Only call btree_clear_folio_dirty_tag() when the folio is no longer
dirty
- Update the comment inside set_extent_buffer_dirty()
As there is no separate clear_subpage_extent_buffer_dirty() anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following functions are doing metadata specific checks:
- set_extent_buffer_uptodate()
- clear_extent_buffer_uptodate()
The reason why we do not use btrfs_folio_*() helpers for those helpers
is, btrfs_is_subpage() cannot handle dummy extent buffer if nodesize >=
PAGE_SIZE but block size < PAGE_SIZE.
In that case, we do not need to attach extra bitmaps to the extent
buffer folio. But since dummy extent buffer folios are not attached to
btree inode, btrfs_is_subpage() will return true, causing problems.
And the following are using btrfs_folio_*() helpers for metadata, but
in theory we should use metadata specific checks:
- set_extent_buffer_dirty()
This is not causing problems because a dummy extent buffer should never
be marked dirty.
To make code simpler, introduce btrfs_meta_folio_*() helpers, to do
the metadata specific handling, so that we do not to open-code such
checks in above involved functions.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently subpage attach/detach is not doing proper dummy extent buffer
subpage check, as btrfs_is_subpage() is not reliable for dummy extent
buffer folios.
Since we have a metadata specific check now, use that for
btrfs_attach_subpage() first.
Then enhance btrfs_detach_subpage() to accept a type parameter, so that
we can do extra checks for dummy extent buffers properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have only one btrfs_is_subpage() to cover both data and
metadata.
But there is a special case for metadata:
- dummy extent buffer, sector size < PAGE_SIZE and node size >= PAGE_SIZE
In such case, btrfs_is_subpage() will return true for extent buffer
folio.
But that is not correct, and that's exactly why we have some open-coded
checks for functions like set_extent_buffer_uptodate() and
clear_extent_buffer_uptodate().
Just extract the metadata specific checks into a helper, and replace
those call sites.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the future large folio support, our filemap can have folios with
different sizes, thus we can no longer rely on a fixed blocks_per_page
value.
To prepare for that future, here we do:
- Remove btrfs_fs_info::sectors_per_page
- Introduce a helper, btrfs_blocks_per_folio()
Which uses the folio size to calculate the number of blocks for each
folio.
- Migrate the existing btrfs_fs_info::sectors_per_page to use that
helper
There are some exceptions:
* Metadata nodesize < page size support
In the future, even if we support large folios, we will only
allocate a folio that matches our nodesize.
Thus we won't have a folio covering multiple metadata unless
nodesize < page size.
* Existing subpage bitmap dump
We use a single unsigned long to store the bitmap.
That means until we change the bitmap dumping code, our upper limit
for folio size will only be 256K (4K block size, 64 bit unsigned
long).
* btrfs_is_subpage() check
This will be migrated into a future patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_do_readpage() if we get an extent map for a prealloc extent we
end up assigning twice to the 'block_start' variable, first the value
returned by extent_map_block_start() and then EXTENT_MAP_HOLE. This is
pointless so make it more clear by using an if-else statement and doing
only one assignment. Also, while at it, move the declaration of
'block_start' into the while loop's scope, since it's not used outside of
it and the related 'disk_bytenr' is also declared in this scope.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In that function we call set_extent_buffer_uptodate() or
clear_extent_buffer_uptodate(), which will already update the uptodate
flag for all the involved extent buffer folios.
Thus there is no need to update the folio uptodate flags again.
Just remove the open-coded part.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove references to the page lock and page->mapping. Also btrfs folios
can never be swizzled into swap (mentioned in extent_write_cache_pages()).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=0hI+
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
After commit ac325fc2aa ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
$ ./check generic/418
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
--- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
btrfs_release_folio() ->
__btrfs_release_folio() ->
try_release_extent_mapping() ->
try_release_extent_state()
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aa ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aa ("btrfs: do not hold the extent lock for entire read")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is meaningless to shift a byte count by folio_shift(). The folio index
is in units of PAGE_SIZE, not folio_size(). We can use folio_contains()
to make this work for arbitrary-order folios, so remove the assertion
that the folios are of order 0.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes the
page allocator so we end up with the ability to allocate and free
zero-refcount pages. So that callers (ie, slab) can avoid a refcount
inc & dec.
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use
large folios other than PMD-sized ones.
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and
fixes for this small built-in kernel selftest.
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part of
the mapletree code.
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups.
- "simplify split calculation" from Wei Yang provides a few fixes and a
test for the mapletree code.
- "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes
continues the work of moving vma-related code into the (relatively) new
mm/vma.c.
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the page
allocator.
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue. It
should reduce the amount of unnecessary reading.
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated
(https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/).
Qi's series addresses this windup by synchronously freeing PTE memory
within the context of madvise(MADV_DONTNEED).
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests code
when optional compiler warnings are enabled.
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from David
Hildenbrand tightens the allocator's observance of __GFP_HARDWALL.
- "pkeys kselftests improvements" from Kevin Brodsky implements various
fixes and cleanups in the MM selftests code, mainly pertaining to the
pkeys tests.
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size.
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic.
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based
kernel build was demonstrated.
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of zram_write_page().
A watchdog softlockup warning was eliminated.
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky
cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed.
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging logic.
- "Account page tables at all levels" from Kevin Brodsky cleans up and
regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy.
- "mm/damon: replace most damon_callback usages in sysfs with new core
functions" from SeongJae Park cleans up and generalizes DAMON's sysfs
file interface logic.
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is presented in
response to DAMOS actions.
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes
DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs
is completed.
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter
Xu cleans up and generalizes the hugetlb reservation accounting.
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface.
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting), but
also inclusion (allowing) behavior.
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
"introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to reduce
the size of struct page and to enable dynamic allocation of memory
descriptors."
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes and
simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel build
time with swap-on-zram.
- "mm: update mips to use do_mmap(), make mmap_region() internal" from
Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal.
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU
regressions and otherwise improves MGLRU performance.
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park
updates DAMON documentation.
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing.
- "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand
provides various cleanups in the areas of hugetlb folios, THP folios and
migration.
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache
reading and writing. To permite userspace to address issues with
massive buildup of useless pagecache when reading/writing fast devices.
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA
jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz
uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE=
=Ib2s
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
The previous commit removed the page_list argument from
alloc_pages_bulk_noprof() along with the alloc_pages_bulk_list() function.
Now that only the *_array() flavour of the API remains, we can do the
following renaming (along with the _noprof() ones):
alloc_pages_bulk_array -> alloc_pages_bulk
alloc_pages_bulk_array_mempolicy -> alloc_pages_bulk_mempolicy
alloc_pages_bulk_array_node -> alloc_pages_bulk_node
Link: https://lkml.kernel.org/r/275a3bbc0be20fbe9002297d60045e67ab3d4ada.1734991165.git.luizcap@redhat.com
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the error handling bugs I hit so far are all -ENOSPC from either:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
Previously when those functions failed, there was no error message at
all, making the debugging much harder.
So here we introduce extra error messages for:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
- writepage_delalloc() when btrfs_run_delalloc_range() failed
- extent_writepage() when extent_writepage_io() failed
One example of the new debug error messages is the following one:
run fstests generic/750 at 2024-12-08 12:41:41
BTRFS: device fsid 461b25f5-e240-4543-8deb-e7c2bd01a6d3 devid 1 transid 8 /dev/mapper/test-scratch1 (253:4) scanned by mount (2436600)
BTRFS info (device dm-4): first mount of filesystem 461b25f5-e240-4543-8deb-e7c2bd01a6d3
BTRFS info (device dm-4): using crc32c (crc32c-arm64) checksum algorithm
BTRFS info (device dm-4): forcing free space tree for sector size 4096 with page size 65536
BTRFS info (device dm-4): using free-space-tree
BTRFS warning (device dm-4): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-4): checking UUID tree
BTRFS error (device dm-4): cow_file_range failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): run_delalloc_nocow failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): failed to run delalloc range, root=363 ino=412 folio=458752 submit_bitmap=11-15 start=503808 len=98304: -28
Which shows an error from cow_file_range() which is called inside a
nocow write attempt, along with the extra bitmap from
writepage_delalloc().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If submit_one_sector() failed inside extent_writepage_io() for sector
size < page size cases (e.g. 4K sector size and 64K page size), then
we can hit double ordered extent accounting error.
This should be very rare, as submit_one_sector() only fails when we
failed to grab the extent map, and such extent map should exist inside
the memory and has been pinned.
[CAUSE]
For example we have the following folio layout:
0 4K 32K 48K 60K 64K
|//| |//////| |///|
Where |///| is the dirty range we need to writeback. The 3 different
dirty ranges are submitted for regular COW.
Now we hit the following sequence:
- submit_one_sector() returned 0 for [0, 4K)
- submit_one_sector() returned 0 for [32K, 48K)
- submit_one_sector() returned error for [60K, 64K)
- btrfs_mark_ordered_io_finished() called for the whole folio
This will mark the following ranges as finished:
* [0, 4K)
* [32K, 48K)
Both ranges have their IO already submitted, this cleanup will
lead to double accounting.
* [60K, 64K)
That's the correct cleanup.
The only good news is, this error is only theoretical, as the target
extent map is always pinned, thus we should directly grab it from
memory, other than reading it from the disk.
[FIX]
Instead of calling btrfs_mark_ordered_io_finished() for the whole folio
range, which can touch ranges we should not touch, instead
move the error handling inside extent_writepage_io().
So that we can cleanup exact sectors that ought to be submitted but failed.
This provides much more accurate cleanup, avoiding the double accounting.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs with block size (4K) smaller than page size (64K,
aarch64), there is a very high chance to crash the kernel at
generic/750, with the following messages:
(before the call traces, there are 3 extra debug messages added)
BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-3): checking UUID tree
hrtimer: interrupt took 5451385 ns
BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs]
CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs]
lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs]
Call trace:
can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P)
can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L)
btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs]
extent_writepage+0x10c/0x3b8 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x160 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x74/0xa0
start_delalloc_inodes+0x17c/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x17c/0x288 [btrfs]
shrink_delalloc+0x11c/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0
CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write)
pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : process_one_work+0x110/0x680
lr : worker_thread+0x1bc/0x360
Call trace:
process_one_work+0x110/0x680 (P)
worker_thread+0x1bc/0x360 (L)
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x275bb9540000 from 0xffff800080000000
PHYS_OFFSET: 0xffff8fbba0000000
CPU features: 0x100,00000070,00801250,8201720b
[CAUSE]
The above warning is triggered immediately after the delalloc range
failure, this happens in the following sequence:
- Range [1568K, 1636K) is dirty
1536K 1568K 1600K 1636K 1664K
| |/////////|////////| |
Where 1536K, 1600K and 1664K are page boundaries (64K page size)
- Enter extent_writepage() for page 1536K
- Enter run_delalloc_nocow() with locked page 1536K and range
[1568K, 1636K)
This is due to the inode having preallocated extents.
- Enter cow_file_range() with locked page 1536K and range
[1568K, 1636K)
- btrfs_reserve_extent() only reserved two extents
The main loop of cow_file_range() only reserved two data extents,
Now we have:
1536K 1568K 1600K 1636K 1664K
| |<-->|<--->|/|///////| |
1584K 1596K
Range [1568K, 1596K) has an ordered extent reserved.
- btrfs_reserve_extent() failed inside cow_file_range() for file offset
1596K
This is already a bug in our space reservation code, but for now let's
focus on the error handling path.
Now cow_file_range() returned -ENOSPC.
- btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE
Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range
[1568K, 1636K)
Function btrfs_cleanup_ordered_extents() normally needs to skip the
ranges inside the folio, as it will normally be cleaned up by
extent_writepage().
Such split error handling is already problematic in the first place.
What's worse is the folio range skipping itself, which is not taking
subpage cases into consideration at all, it will only skip the range
if the page start >= the range start.
In our case, the page start < the range start, since for subpage cases
we can have delalloc ranges inside the folio but not covering the
folio.
So it doesn't skip the page range at all.
This means all the ordered extents, both [1568K, 1584K) and
[1584K, 1596K) will be marked as IOERR.
And these two ordered extents have no more pending ios, they are marked
finished, and *QUEUED* to be deleted from the io tree.
- extent_writepage() do error cleanup
Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K).
Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the
deletion from io tree is async, it may or may not happen at this
time.
If the ranges have not yet been removed, we will do double cleaning on
those ranges, triggering the above ordered extent warnings.
In theory there are other bugs, like the cleanup in extent_writepage()
can cause double accounting on ranges that are submitted asynchronously
(compression for example).
But that's much harder to trigger because normally we do not mix regular
and compression delalloc ranges.
[FIX]
The folio range split is already buggy and not subpage compatible, it
was introduced a long time ago where subpage support was not even considered.
So instead of splitting the ordered extents cleanup into the folio range
and out of folio range, do all the cleanup inside writepage_delalloc().
- Pass @NULL as locked_folio for btrfs_cleanup_ordered_extents() in
btrfs_run_delalloc_range()
- Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc()
failed
So all ordered extents are only cleaned up by
btrfs_run_delalloc_range().
- Handle the ranges that already have ordered extents allocated
If part of the folio already has ordered extent allocated, and
btrfs_run_delalloc_range() failed, we also need to cleanup that range.
Now we have a concentrated error handling for ordered extents during
btrfs_run_delalloc_range().
Fixes: d1051d6ebf ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Same pattern in both functions, we really only use index, start_index is
redundant.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Another conversion to folio API, use the folio locking directly instead
of back and forth page <-> folio conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check function pattern is supposed to return true/false, currently
there's only one error code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the folio API, remove page_folio/folio_page conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Continue page to folio updates, sync what the function does with it's
name.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the kmem cache freeing directly is clear enough, we don't need to
wrap it. All the users are in the same file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The simple helper can be inlined, no need for the separate function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As extent_writepage() is internal helper we should use our inode type,
so change it from struct inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The double underscore naming scheme does not apply here, there's only
only get_extent_map(). As the definition is changed also pass the struct
btrfs_inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function set_page_extent_mapped() is now a simple wrapper so use the
folio helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the leading underscores in '__unlock_for_delalloc()' and rename it
to 'unlock_delalloc_folio()'. This also ensures naming parity with
'lock_delalloc_folios()'.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 449813515d ("block, fs: Restore the per-bio/request data
lifetime fields") restored write-hint support in btrfs. But that is
applicable only for direct IO. This patch supports passing
write-hint for buffered IO from btrfs file system to block layer
by filling bi_write_hint of struct bio in alloc_new_bio().
There's an ongoing discussion which devices can use that,
https://lore.kernel.org/all/20240910150200.6589-6-joshi.k@samsung.com,
in SCSI there's support using sd_group_number() and
sd_setup_rw32_cmnd().
The hint goes from the application directly to the block device so it's
up to the application to set up everything properly to utilize the
different hint classes.
Link: https://lore.kernel.org/all/20240910150200.6589-6-joshi.k@samsung.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jing Xia <j.xia@samsung.com>
[ Add more context and use case. ]
Signed-off-by: David Sterba <dsterba@suse.com>
