mirror of
https://github.com/torvalds/linux.git
synced 2025-11-04 10:40:15 +02:00
144 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
bc3012f4e3 |
This update includes the following changes:
API: - Add virtual-address based lskcipher interface. - Optimise ahash/shash performance in light of costly indirect calls. - Remove ahash alignmask attribute. Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc. - Remove some uses of obsolete algorithms (md4, md5, sha1). - Add FIPS 202 SHA-3 support in pkcs1pad. - Add fast path for single-page messages in adiantum. - Remove zlib-deflate. Drivers: - Add support for S4 in meson RNG driver. - Add STM32MP13x support in stm32. - Add hwrng interface support in qcom-rng. - Add support for deflate algorithm in hisilicon/zip. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmVB3vgACgkQxycdCkmx i6dsOBAAykbnX8BpnpnOXYywE9ZWrl98rAk51MK0N9olZNfg78zRPIv7fFxFdC20 SDJrDSNPmn0Qvaa5e0EfoAdklsm0k2GkXL/BwPKMKWUsyIoJVYI3WrBMnjBy9xMp yfME+h0bKoXJCZKnYkIUSGUejmUPSyRlEylrXoFlH/VWYwAaii/x9zwreQoF+0LR KI24A1q8AYs6Dw9HSfndaAub9GOzrqKYs6fSaMG+77Y4UC5aoi5J9Bp2G3uVyHay x/0bZtIxKXS9wn+LeG/3GspX23x/I5VwBOdAoMigrYmAIaIg5qgyMszudltTAs4R zF1Kh7WsnM5+vpnBSeigzo+/GGOU3QTz8y3tBTg+3ZR7GWGOwQLiizhOYqCyOfAH pIm6c++sZw/OOHiL69Nt4HeLKzGNYYWk3s4X/B/6cqoouPfOsfBaQobZNx9zfy7q ZNEvSVBjrFX/L6wDSotny1LTWLUNjHbmLaMV5uQZ/SQKEtv19fp2Dl7SsLkHH+3v ldOAwfoJR6QcSwz3Ez02TUAvQhtP172Hnxi7u44eiZu2aUboLhCFr7aEU6kVdBCx 1rIRVHD1oqlOEDRwPRXzhF3I8R4QDORJIxZ6UUhg7yueuI+XCGDsBNC+LqBrBmSR IbdjqmSDUBhJyM5yMnt1VFYhqKQ/ZzwZ3JQviwW76Es9pwEIolM= =IZmR -----END PGP SIGNATURE----- Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ... |
||
|
Andrea Righi
|
17fc8084aa |
module/decompress: use kvmalloc() consistently
We consistently switched from kmalloc() to vmalloc() in module decompression to prevent potential memory allocation failures with large modules, however vmalloc() is not as memory-efficient and fast as kmalloc(). Since we don't know in general the size of the workspace required by the decompression algorithm, it is more reasonable to use kvmalloc() consistently, also considering that we don't have special memory requirements here. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
ea0b0bcef4 |
module: Annotate struct module_notes_attrs with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct module_notes_attrs. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Zhu Mao
|
fd06da7761 |
module: Fix comment typo
Delete duplicated word in comment. Signed-off-by: Zhu Mao <zhumao001@208suo.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Andrea Righi
|
3737df782c |
module/decompress: use vmalloc() for gzip decompression workspace
Use a similar approach as commit |
||
|
Dimitri John Ledkov
|
446b1e0b7b |
module: enable automatic module signing with FIPS 202 SHA-3
Add Kconfig options to use SHA-3 for kernel module signing. 256 size for RSA only, and higher sizes for RSA and NIST P-384. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Dimitri John Ledkov
|
fc3225fd6f |
module: Do not offer sha224 for built-in module signing
sha224 does not provide enough security against collision attacks relative to the default keys used for signing (RSA 4k & P-384). Also sha224 never became popular, as sha256 got widely adopter ahead of sha224 being introduced. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Dimitri John Ledkov
|
16ab7cb582 |
crypto: pkcs7 - remove sha1 support
Removes support for sha1 signed kernel modules, importing sha1 signed x.509 certificates. rsa-pkcs1pad keeps sha1 padding support, which seems to be used by virtio driver. sha1 remains available as there are many drivers and subsystems using it. Note only hmac(sha1) with secret keys remains cryptographically secure. In the kernel there are filesystems, IMA, tpm/pcr that appear to be using sha1. Maybe they can all start to be slowly upgraded to something else i.e. blake3, ParallelHash, SHAKE256 as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Andrea Righi
|
a419beac4a |
module/decompress: use vmalloc() for zstd decompression workspace
Using kmalloc() to allocate the decompression workspace for zstd may
trigger the following warning when large modules are loaded (i.e., xfs):
[ 2.961884] WARNING: CPU: 1 PID: 254 at mm/page_alloc.c:4453 __alloc_pages+0x2c3/0x350
...
[ 2.989033] Call Trace:
[ 2.989841] <TASK>
[ 2.990614] ? show_regs+0x6d/0x80
[ 2.991573] ? __warn+0x89/0x160
[ 2.992485] ? __alloc_pages+0x2c3/0x350
[ 2.993520] ? report_bug+0x17e/0x1b0
[ 2.994506] ? handle_bug+0x51/0xa0
[ 2.995474] ? exc_invalid_op+0x18/0x80
[ 2.996469] ? asm_exc_invalid_op+0x1b/0x20
[ 2.997530] ? module_zstd_decompress+0xdc/0x2a0
[ 2.998665] ? __alloc_pages+0x2c3/0x350
[ 2.999695] ? module_zstd_decompress+0xdc/0x2a0
[ 3.000821] __kmalloc_large_node+0x7a/0x150
[ 3.001920] __kmalloc+0xdb/0x170
[ 3.002824] module_zstd_decompress+0xdc/0x2a0
[ 3.003857] module_decompress+0x37/0xc0
[ 3.004688] init_module_from_file+0xd0/0x100
[ 3.005668] idempotent_init_module+0x11c/0x2b0
[ 3.006632] __x64_sys_finit_module+0x64/0xd0
[ 3.007568] do_syscall_64+0x59/0x90
[ 3.008373] ? ksys_read+0x73/0x100
[ 3.009395] ? exit_to_user_mode_prepare+0x30/0xb0
[ 3.010531] ? syscall_exit_to_user_mode+0x37/0x60
[ 3.011662] ? do_syscall_64+0x68/0x90
[ 3.012511] ? do_syscall_64+0x68/0x90
[ 3.013364] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
However, continuous physical memory does not seem to be required in
module_zstd_decompress(), so use vmalloc() instead, to prevent the
warning and avoid potential failures at loading compressed modules.
Fixes:
|
||
|
James Morse
|
2abcc4b5a6 |
module: Expose module_init_layout_section()
module_init_layout_section() choses whether the core module loader
considers a section as init or not. This affects the placement of the
exit section when module unloading is disabled. This code will never run,
so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying
relocations based on the section name. The init PLTs are stored separately
so they can be free()d. arm and arm64 both use within_module_init() to
decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading
is disabled, both architecture would need to take this into account when
counting the PLTs.
Today neither architecture does this, meaning when module unloading is
disabled there are insufficient PLTs in the init section to load some
modules, resulting in warnings:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Fixes:
|
||
|
Christoph Hellwig
|
9011e49d54 |
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
It has recently come to my attention that nvidia is circumventing the protection added in |
||
|
Palmer Dabbelt
|
ff09f6fd29 |
modpost, kallsyms: Treat add '$'-prefixed symbols as mapping symbols
Trying to restrict the '$'-prefix change to RISC-V caused some fallout,
so let's just treat all those symbols as special.
Fixes:
|
||
|
Palmer Dabbelt
|
c05780ef3c |
module: Ignore RISC-V mapping symbols too
RISC-V has an extended form of mapping symbols that we use to encode the ISA when it changes in the middle of an ELF. This trips up modpost as a build failure, I haven't yet verified it yet but I believe the kallsyms difference should result in stacks looking sane again. Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/all/9d9e2902-5489-4bf0-d9cb-556c8e5d71c2@infradead.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
f196220715 |
module: fix init_module_from_file() error handling
Vegard Nossum pointed out two different problems with the error handling
in init_module_from_file():
(a) the idempotent loading code didn't clean up properly in some error
cases, leaving the on-stack 'struct idempotent' element still in
the hash table
(b) failure to read the module file would nonsensically update the
'invalid_kread_bytes' stat counter with the error value
The first error is quite nasty, in that it can then cause subsequent
idempotent loads of that same file to access stale stack contents of the
previous failure. The case may not happen in any normal situation
(explaining all the "Tested-by's on the original change), and requires
admin privileges, but syzkaller triggers random bad behavior as a
result:
BUG: soft lockup in sys_finit_module
BUG: unable to handle kernel paging request in init_module_from_file
general protection fault in init_module_from_file
INFO: task hung in init_module_from_file
KASAN: out-of-bounds Read in init_module_from_file
KASAN: slab-out-of-bounds Read in init_module_from_file
...
The second error is fairly benign and just leads to nonsensical stats
(and has been around since the debug stats were added).
Vegard also provided a patch for the idempotent loading issue, but I'd
rather re-organize the code and make it more legible using another level
of helper functions than add the usual "goto out" error handling.
Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/
Fixes:
|
||
|
Linus Torvalds
|
ad2885979e |
Kbuild updates for v6.5
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with
the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the linux-image
Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
-----BEGIN PGP SIGNATURE-----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=Rc1z
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
|
||
|
Linus Torvalds
|
4e3c09e954 |
v6.5-rc1-modules-next
The changes queued up for v6.5-rc1 for modules are pretty tame, mostly code removal of moving of code. Only two minor functional changes are made, the only one which stands out is Sebastian Andrzej Siewior's simplification of module reference counting by removing preempt_disable() and that has been tested on linux-next for well over a month without no regressions. I'm now, I guess, also a kitchen sink for some kallsyms changes. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmScfl0SHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoin8oMP/0DQK+r3BZimknzz6rF0EBStNZ/dIK2W 1Q/r/ER4VKQKYxklc1M74K+7IX8ZDCYxqlaDS9lvAkRDWNC+t69aNZEib2odJleC p6WB30P0JIwfZZC0DS/ct3vrWZTyUhw7aOtvABRmjBfiJ3lFlU092Glvk1w1aFbD UrNRomPu4CujzfmnGj3VGc+HVSOEK0F1/GLm9ClrsR8SzKEpQmH4ALI/ON69B0ea PmL+d1Wyt6WEoH0hlV1TOXNdHUb3ZO1riSSfDYQ7TiG2AM5w1t4n26YRusc16hYU 6Bx4OGt52ZJYR3btsRQlcylF4R5DUo+boDkM0NqEDU/3ciGMg6DgKdHnYCBN1w+X ZO8aXK1MIgF7W6CqSz+8HCsu5CuCos55FgM22dPbpZr3OEFCWemqnV+cYCu1DA+M Gbnn883ZLtt+R+qikD3135s+LxYIvxSuQrj+B3ZoQeIKEtAlyxuhrUJbU0tOns0j 05PrkI8J1FtIysdlNZeIFg752IPtjp/0QNB4R46m40mT16L0TSjEP7c+zcPDryMb 84SdLqh1gis0QZRkoH6JbMBDeT2dtuxqtQ5dTPka4s1mtg3SvRYr53sCJg+gQ8e2 CBW6jgrIf3F4RIMMiSfXpSf4yVVxXxJAEFnGLRXhQ2HkUnk3mdGEfsZc7ucrsnlK f/KwaEzmLD9c =gjKD -----END PGP SIGNATURE----- Merge tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The changes queued up for modules are pretty tame, mostly code removal of moving of code. Only two minor functional changes are made, the only one which stands out is Sebastian Andrzej Siewior's simplification of module reference counting by removing preempt_disable() and that has been tested on linux-next for well over a month without no regressions. I'm now, I guess, also a kitchen sink for some kallsyms changes" [ There was a mis-communication about the concurrent module load changes that I had expected to come through Luis despite me authoring the patch. So some of the module updates were left hanging in the email ether, and I just committed them separately. It's my bad - I should have made it more clear that I expected my own patches to come through the module tree too. Now they missed linux-next, but hopefully that won't cause any issues - Linus ] * tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kallsyms: make kallsyms_show_value() as generic function kallsyms: move kallsyms_show_value() out of kallsyms.c kallsyms: remove unsed API lookup_symbol_attrs kallsyms: remove unused arch_get_kallsym() helper module: Remove preempt_disable() from module reference counting. |
||
|
Linus Torvalds
|
9b9879fc03 |
modules: catch concurrent module loads, treat them as idempotent
This is the new-and-improved attempt at avoiding huge memory load spikes
when the user space boot sequence tries to load hundreds (or even
thousands) of redundant duplicate modules in parallel.
See commit
|
||
|
Linus Torvalds
|
054a73009c |
module: split up 'finit_module()' into init_module_from_file() helper
This will simplify the next step, where we can then key off the inode to do one idempotent module load. Let's do the obvious re-organization in one step, and then the new code in another. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Masahiro Yamada
|
ddb5cdbafa |
kbuild: generate KSYMTAB entries by modpost
Commit |
||
|
Lucas De Marchi
|
fadb74f9f2 |
module/decompress: Fix error checking on zstd decompression
While implementing support for in-kernel decompression in kmod,
finit_module() was returning a very suspicious value:
finit_module(3, "", MODULE_INIT_COMPRESSED_FILE) = 18446744072717407296
It turns out the check for module_get_next_page() failing is wrong,
and hence the decompression was not really taking place. Invert
the condition to fix it.
Fixes:
|
||
|
Song Liu
|
db3e33dd8b |
module: fix module load for ia64
Frank reported boot regression in ia64 as: ELILO v3.16 for EFI/IA-64 .. Uncompressing Linux... done Loading file AC100221.initrd.img...done [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20 CEST 2023 [ 0.000000] efi: EFI v1.1 by HP [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000 [ 0.000000] PCDP: v3 at 0x3fe28000 [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options '9600n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP ) [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620 00000000 HP 00000000) [...] [ 3.793350] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 3.951100] ------------[ cut here ]------------ [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547 __layout_sections+0x370/0x3c0 [ 3.949512] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.951100] Modules linked in: [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1 [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1] [ 3.951774] Hardware name: hp server rx2620 , BIOS 04.29 11/30/2007 [ 3.951774] [ 3.951774] Call Trace: [ 3.958339] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.956161] Modules linked in: [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 [ 3.951774] sp=e000000183a67b20 bsp=e000000183a61628 [ 3.956161] [ 3.956161] which bisect to module_memory change [1]. Debug showed that ia64 uses some special sections: __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID All these sections are loaded to module core memory before [1]. Fix ia64 boot by loading these sections to MOD_DATA (core rw data). [1] commit |
||
|
Maninder Singh
|
4f521bab5b |
kallsyms: remove unsed API lookup_symbol_attrs
with commit '7878c231dae0 ("slab: remove /proc/slab_allocators")'
lookup_symbol_attrs usage is removed.
Thus removing redundant API.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
|
Sebastian Andrzej Siewior
|
cb0b50b813 |
module: Remove preempt_disable() from module reference counting.
The preempt_disable() section in module_put() was added in commit |
||
|
Harshit Mogalapalli
|
d36f6efbe0 |
module: Fix use-after-free bug in read_file_mod_stats()
Smatch warns:
kernel/module/stats.c:394 read_file_mod_stats()
warn: passing freed memory 'buf'
We are passing 'buf' to simple_read_from_buffer() after freeing it.
Fix this by changing the order of 'simple_read_from_buffer' and 'kfree'.
Fixes:
|
||
|
Arnd Bergmann
|
0b891c83d8 |
module: include internal.h in module/dups.c
Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':
kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
220 | void kmod_dup_request_announce(char *module_name, int ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit include to ensure the prototypes match.
Fixes:
|
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
vP7ugFnttneg
=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Luis Chamberlain
|
8660484ed1 |
module: add debugging auto-load duplicate module support
The finit_module() system call can in the worst case use up to more than twice of a module's size in virtual memory. Duplicate finit_module() system calls are non fatal, however they unnecessarily strain virtual memory during bootup and in the worst case can cause a system to fail to boot. This is only known to currently be an issue on systems with larger number of CPUs. To help debug this situation we need to consider the different sources for finit_module(). Requests from the kernel that rely on module auto-loading, ie, the kernel's *request_module() API, are one source of calls. Although modprobe checks to see if a module is already loaded prior to calling finit_module() there is a small race possible allowing userspace to trigger multiple modprobe calls racing against modprobe and this not seeing the module yet loaded. This adds debugging support to the kernel module auto-loader (*request_module() calls) to easily detect duplicate module requests. To aid with possible bootup failure issues incurred by this, it will converge duplicates requests to a single request. This avoids any possible strain on virtual memory during bootup which could be incurred by duplicate module autoloading requests. Folks debugging virtual memory abuse on bootup can and should enable this to see what pr_warn()s come on, to see if module auto-loading is to blame for their wores. If they see duplicates they can further debug this by enabling the module.enable_dups_trace kernel parameter or by enabling CONFIG_MODULE_DEBUG_AUTOLOAD_DUPS_TRACE. Current evidence seems to point to only a few duplicates for module auto-loading. And so the source for other duplicates creating heavy virtual memory pressure due to larger number of CPUs should becoming from another place (likely udev). Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Arnd Bergmann
|
a81b1fc8ea |
module: stats: fix invalid_mod_bytes typo
This was caught by randconfig builds but does not show up in
build testing without CONFIG_MODULE_DECOMPRESS:
kernel/module/stats.c: In function 'mod_stat_bump_invalid':
kernel/module/stats.c:229:42: error: 'invalid_mod_byte' undeclared (first use in this function); did you mean 'invalid_mod_bytes'?
229 | atomic_long_add(info->compressed_len, &invalid_mod_byte);
| ^~~~~~~~~~~~~~~~
| invalid_mod_bytes
Fixes:
|
||
|
Tom Rix
|
9f5cab173e |
module: remove use of uninitialized variable len
clang build reports
kernel/module/stats.c:307:34: error: variable
'len' is uninitialized when used here [-Werror,-Wuninitialized]
len = scnprintf(buf + 0, size - len,
^~~
At the start of this sequence, neither the '+ 0', nor the '- len' are needed.
So remove them and fix using 'len' uninitalized.
Fixes:
|
||
|
Arnd Bergmann
|
719ccd803e |
module: fix building stats for 32-bit targets
The new module statistics code mixes 64-bit types and wordsized 'long'
variables, which leads to build failures on 32-bit architectures:
kernel/module/stats.c: In function 'read_file_mod_stats':
kernel/module/stats.c:291:29: error: passing argument 1 of 'atomic64_read' from incompatible pointer type [-Werror=incompatible-pointer-types]
291 | total_size = atomic64_read(&total_mod_size);
x86_64-linux-ld: kernel/module/stats.o: in function `read_file_mod_stats':
stats.c:(.text+0x2b2): undefined reference to `__udivdi3'
To fix this, the code has to use one of the two types consistently.
Change them all to word-size types here.
Fixes:
|
||
|
Arnd Bergmann
|
635dc38314 |
module: stats: include uapi/linux/module.h
MODULE_INIT_COMPRESSED_FILE is defined in the uapi header, which
is not included indirectly from the normal linux/module.h, but
has to be pulled in explicitly:
kernel/module/stats.c: In function 'mod_stat_bump_invalid':
kernel/module/stats.c:227:14: error: 'MODULE_INIT_COMPRESSED_FILE' undeclared (first use in this function)
227 | if (flags & MODULE_INIT_COMPRESSED_FILE)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
|
Luis Chamberlain
|
064f4536d1 |
module: avoid allocation if module is already present and ready
The finit_module() system call can create unnecessary virtual memory
pressure for duplicate modules. This is because load_module() can in
the worse case allocate more than twice the size of a module in virtual
memory. This saves at least a full size of the module in wasted vmalloc
space memory by trying to avoid duplicates as soon as we can validate
the module name in the read module structure.
This can only be an issue if a system is getting hammered with userspace
loading modules. There are two ways to load modules typically on systems,
one is the kernel moduile auto-loading (*request_module*() calls in-kernel)
and the other is things like udev. The auto-loading is in-kernel, but that
pings back to userspace to just call modprobe. We already have a way to
restrict the amount of concurrent kernel auto-loads in a given time, however
that still allows multiple requests for the same module to go through
and force two threads in userspace racing to call modprobe for the same
exact module. Even though libkmod which both modprobe and udev does check
if a module is already loaded prior calling finit_module() races are
still possible and this is clearly evident today when you have multiple
CPUs.
To avoid memory pressure for such stupid cases put a stop gap for them.
The *earliest* we can detect duplicates from the modules side of things
is once we have blessed the module name, sadly after the first vmalloc
allocation. We can check for the module being present *before* a secondary
vmalloc() allocation.
There is a linear relationship between wasted virtual memory bytes and
the number of CPU counts. The reason is that udev ends up racing to call
tons of the same modules for each of the CPUs.
We can see the different linear relationships between wasted virtual
memory and CPU count during after boot in the following graph:
+----------------------------------------------------------------------------+
14GB |-+ + + + + *+ +-|
| **** |
| *** |
| ** |
12GB |-+ ** +-|
| ** |
| ** |
| ** |
| ** |
10GB |-+ ** +-|
| ** |
| ** |
| ** |
8GB |-+ ** +-|
waste | ** ### |
| ** #### |
| ** ####### |
6GB |-+ **** #### +-|
| * #### |
| * #### |
| ***** #### |
4GB |-+ ** #### +-|
| ** #### |
| ** #### |
| ** #### |
2GB |-+ ** ##### +-|
| * #### |
| * #### Before ******* |
| **## + + + + After ####### |
+----------------------------------------------------------------------------+
0 50 100 150 200 250 300
CPUs count
On the y-axis we can see gigabytes of wasted virtual memory during boot
due to duplicate module requests which just end up failing. Trying to
infer the slope this ends up being about ~463 MiB per CPU lost prior
to this patch. After this patch we only loose about ~230 MiB per CPU, for
a total savings of about ~233 MiB per CPU. This is all *just on bootup*!
On a 8vcpu 8 GiB RAM system using kdevops and testing against selftests
kmod.sh -t 0008 I see a saving in the *highest* side of memory
consumption of up to ~ 84 MiB with the Linux kernel selftests kmod
test 0008. With the new stress-ng module test I see a 145 MiB difference
in max memory consumption with 100 ops. The stress-ng module ops tests can be
pretty pathalogical -- it is not realistic, however it was used to
finally successfully reproduce issues which are only reported to happen on
system with over 400 CPUs [0] by just usign 100 ops on a 8vcpu 8 GiB RAM
system. Running out of virtual memory space is no surprise given the
above graph, since at least on x86_64 we're capped at 128 MiB, eventually
we'd hit a series of errors and once can use the above graph to
guestimate when. This of course will vary depending on the features
you have enabled. So for instance, enabling KASAN seems to make this
much worse.
The results with kmod and stress-ng can be observed and visualized below.
The time it takes to run the test is also not affected.
The kmod tests 0008:
The gnuplot is set to a range from 400000 KiB (390 Mib) - 580000 (566 Mib)
given the tests peak around that range.
cat kmod.plot
set term dumb
set output fileout
set yrange [400000:580000]
plot filein with linespoints title "Memory usage (KiB)"
Before:
root@kmod ~ # /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008
root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > log-0008-before.txt ^C
root@kmod ~ # sort -n -r log-0008-before.txt | head -1
528732
So ~516.33 MiB
After:
root@kmod ~ # /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008
root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > log-0008-after.txt ^C
root@kmod ~ # sort -n -r log-0008-after.txt | head -1
442516
So ~432.14 MiB
That's about 84 ~MiB in savings in the worst case. The graphs:
root@kmod ~ # gnuplot -e "filein='log-0008-before.txt'; fileout='graph-0008-before.txt'" kmod.plot
root@kmod ~ # gnuplot -e "filein='log-0008-after.txt'; fileout='graph-0008-after.txt'" kmod.plot
root@kmod ~ # cat graph-0008-before.txt
580000 +-----------------------------------------------------------------+
| + + + + + + + |
560000 |-+ Memory usage (KiB) ***A***-|
| |
540000 |-+ +-|
| |
| *A *AA*AA*A*AA *A*AA A*A*A *AA*A*AA*A A |
520000 |-+A*A*AA *AA*A *A*AA*A*AA *A*A A *A+-|
|*A |
500000 |-+ +-|
| |
480000 |-+ +-|
| |
460000 |-+ +-|
| |
| |
440000 |-+ +-|
| |
420000 |-+ +-|
| + + + + + + + |
400000 +-----------------------------------------------------------------+
0 5 10 15 20 25 30 35 40
root@kmod ~ # cat graph-0008-after.txt
580000 +-----------------------------------------------------------------+
| + + + + + + + |
560000 |-+ Memory usage (KiB) ***A***-|
| |
540000 |-+ +-|
| |
| |
520000 |-+ +-|
| |
500000 |-+ +-|
| |
480000 |-+ +-|
| |
460000 |-+ +-|
| |
| *A *A*A |
440000 |-+A*A*AA*A A A*A*AA A*A*AA*A*AA*A*AA*A*AA*AA*A*AA*A*AA-|
|*A *A*AA*A |
420000 |-+ +-|
| + + + + + + + |
400000 +-----------------------------------------------------------------+
0 5 10 15 20 25 30 35 40
The stress-ng module tests:
This is used to run the test to try to reproduce the vmap issues
reported by David:
echo 0 > /proc/sys/vm/oom_dump_tasks
./stress-ng --module 100 --module-name xfs
Prior to this commit:
root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > baseline-stress-ng.txt
root@kmod ~ # sort -n -r baseline-stress-ng.txt | head -1
|
||
|
Luis Chamberlain
|
df3e764d8e |
module: add debug stats to help identify memory pressure
Loading modules with finit_module() can end up using vmalloc(), vmap()
and vmalloc() again, for a total of up to 3 separate allocations in the
worst case for a single module. We always kernel_read*() the module,
that's a vmalloc(). Then vmap() is used for the module decompression,
and if so the last read buffer is freed as we use the now decompressed
module buffer to stuff data into our copy module. The last allocation is
specific to each architectures but pretty much that's generally a series
of vmalloc() calls or a variation of vmalloc to handle ELF sections with
special permissions.
Evaluation with new stress-ng module support [1] with just 100 ops
is proving that you can end up using GiBs of data easily even with all
care we have in the kernel and userspace today in trying to not load modules
which are already loaded. 100 ops seems to resemble the sort of pressure a
system with about 400 CPUs can create on module loading. Although issues
relating to duplicate module requests due to each CPU inucurring a new
module reuest is silly and some of these are being fixed, we currently lack
proper tooling to help diagnose easily what happened, when it happened
and who likely is to blame -- userspace or kernel module autoloading.
Provide an initial set of stats which use debugfs to let us easily scrape
post-boot information about failed loads. This sort of information can
be used on production worklaods to try to optimize *avoiding* redundant
memory pressure using finit_module().
There's a few examples that can be provided:
A 255 vCPU system without the next patch in this series applied:
Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s
graphical.target reached after 6.988s in userspace
And 13.58 GiB of virtual memory space lost due to failed module loading:
root@big ~ # cat /sys/kernel/debug/modules/stats
Mods ever loaded 67
Mods failed on kread 0
Mods failed on decompress 0
Mods failed on becoming 0
Mods failed on load 1411
Total module size 11464704
Total mod text size 4194304
Failed kread bytes 0
Failed decompress bytes 0
Failed becoming bytes 0
Failed kmod bytes 14588526272
Virtual mem wasted bytes 14588526272
Average mod size 171115
Average mod text size 62602
Average fail load bytes 10339140
Duplicate failed modules:
module-name How-many-times Reason
kvm_intel 249 Load
kvm 249 Load
irqbypass 8 Load
crct10dif_pclmul 128 Load
ghash_clmulni_intel 27 Load
sha512_ssse3 50 Load
sha512_generic 200 Load
aesni_intel 249 Load
crypto_simd 41 Load
cryptd 131 Load
evdev 2 Load
serio_raw 1 Load
virtio_pci 3 Load
nvme 3 Load
nvme_core 3 Load
virtio_pci_legacy_dev 3 Load
virtio_pci_modern_dev 3 Load
t10_pi 3 Load
virtio 3 Load
crc32_pclmul 6 Load
crc64_rocksoft 3 Load
crc32c_intel 40 Load
virtio_ring 3 Load
crc64 3 Load
The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the
next patch in this series applied, shows 226.53 MiB are wasted in virtual
memory allocations which due to duplicate module requests during boot.
It also shows an average module memory size of 167.10 KiB and an an
average module .text + .init.text size of 61.13 KiB. The end shows all
modules which were detected as duplicate requests and whether or not
they failed early after just the first kernel_read*() call or late after
we've already allocated the private space for the module in
layout_and_allocate(). A system with module decompression would reveal
more wasted virtual memory space.
We should put effort now into identifying the source of these duplicate
module requests and trimming these down as much possible. Larger systems
will obviously show much more wasted virtual memory allocations.
root@kmod ~ # cat /sys/kernel/debug/modules/stats
Mods ever loaded 67
Mods failed on kread 0
Mods failed on decompress 0
Mods failed on becoming 83
Mods failed on load 16
Total module size 11464704
Total mod text size 4194304
Failed kread bytes 0
Failed decompress bytes 0
Failed becoming bytes 228959096
Failed kmod bytes 8578080
Virtual mem wasted bytes 237537176
Average mod size 171115
Average mod text size 62602
Avg fail becoming bytes 2758544
Average fail load bytes 536130
Duplicate failed modules:
module-name How-many-times Reason
kvm_intel 7 Becoming
kvm 7 Becoming
irqbypass 6 Becoming & Load
crct10dif_pclmul 7 Becoming & Load
ghash_clmulni_intel 7 Becoming & Load
sha512_ssse3 6 Becoming & Load
sha512_generic 7 Becoming & Load
aesni_intel 7 Becoming
crypto_simd 7 Becoming & Load
cryptd 3 Becoming & Load
evdev 1 Becoming
serio_raw 1 Becoming
nvme 3 Becoming
nvme_core 3 Becoming
t10_pi 3 Becoming
virtio_pci 3 Becoming
crc32_pclmul 6 Becoming & Load
crc64_rocksoft 3 Becoming
crc32c_intel 3 Becoming
virtio_pci_modern_dev 2 Becoming
virtio_pci_legacy_dev 1 Becoming
crc64 2 Becoming
virtio 2 Becoming
virtio_ring 2 Becoming
[0] https://github.com/ColinIanKing/stress-ng.git
[1] echo 0 > /proc/sys/vm/oom_dump_tasks
./stress-ng --module 100 --module-name xfs
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
|
Luis Chamberlain
|
f71afa6a42 |
module: extract patient module check into helper
The patient module check inside add_unformed_module() is large enough as we need it. It is a bit hard to read too, so just move it to a helper and do the inverse checks first to help shift the code and make it easier to read. The new helper then is module_patient_check_exists(). To make this work we need to mvoe the finished_loading() up, we do that without making any functional changes to that routine. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
25a1b5b518 |
modules/kmod: replace implementation with a semaphore
Simplify the concurrency delimiter we use for kmod with the semaphore. I had used the kmod strategy to try to implement a similar concurrency delimiter for the kernel_read*() calls from the finit_module() path so to reduce vmalloc() memory pressure. That effort didn't provide yet conclusive results, but one thing that became clear is we can use the suggested alternative solution with semaphores which Linus hinted at instead of using the atomic / wait strategy. I've stress tested this with kmod test 0008: time /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 And I get only a *slight* delay. That delay however is small, a few seconds for a full test loop run that runs 150 times, for about ~30-40 seconds. The small delay is worth the simplfication IMHO. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
430bb0d1c3 |
module: fix kmemleak annotations for non init ELF sections
Commit |
||
|
Tiezhu Yang
|
0a3bf86092 |
module: Ignore L0 and rename is_arm_mapping_symbol()
The L0 symbol is generated when build module on LoongArch, ignore it in
modpost and when looking at module symbols, otherwise we can not see the
expected call trace.
Now is_arm_mapping_symbol() is not only for ARM, in order to reflect the
reality, rename is_arm_mapping_symbol() to is_mapping_symbol().
This is related with commit
|
||
|
Tiezhu Yang
|
987d2e0aaa |
module: Move is_arm_mapping_symbol() to module_symbol.h
In order to avoid duplicated code, move is_arm_mapping_symbol() to include/linux/module_symbol.h, then remove is_arm_mapping_symbol() in the other places. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Tiezhu Yang
|
87e5b1e8f2 |
module: Sync code of is_arm_mapping_symbol()
After commit |
||
|
Jiri Olsa
|
d099f594ad |
kallsyms: Disable preemption for find_kallsyms_symbol_value
Artem reported suspicious RCU usage [1]. The reason is that verifier
calls find_kallsyms_symbol_value with preemption enabled which will
trigger suspicious RCU usage warning in rcu_dereference_sched call.
Disabling preemption in find_kallsyms_symbol_value and adding
__find_kallsyms_symbol_value function.
Fixes:
|
||
|
Jim Cromie
|
33c951f629 |
module: already_uses() - reduce pr_debug output volume
already_uses() is unnecessarily chatty. `modprobe i915` yields 491 messages like: [ 64.108744] i915 uses drm! This is a normal situation, and isn't worth all the log entries. NOTE: I've preserved the "does not use %s" messages, which happens less often, but does happen. Its not clear to me what it tells a reader, or what info might improve the pr_debug's utility. [ 6847.584999] main:already_uses:569: amdgpu does not use ttm! [ 6847.585001] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585014] main:already_uses:569: amdgpu does not use drm! [ 6847.585016] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585024] main:already_uses:569: amdgpu does not use drm_display_helper! [ 6847.585025] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585084] main:already_uses:569: amdgpu does not use drm_kms_helper! [ 6847.585086] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585175] main:already_uses:569: amdgpu does not use drm_buddy! [ 6847.585176] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585202] main:already_uses:569: amdgpu does not use i2c_algo_bit! [ 6847.585204] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585249] main:already_uses:569: amdgpu does not use gpu_sched! [ 6847.585250] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585314] main:already_uses:569: amdgpu does not use video! [ 6847.585315] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585409] main:already_uses:569: amdgpu does not use iommu_v2! [ 6847.585410] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585816] main:already_uses:569: amdgpu does not use drm_ttm_helper! [ 6847.585818] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6848.762268] dyndbg: add-module: amdgpu.2533 sites no functional changes. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Jim Cromie
|
66a2301edf |
module: add section-size to move_module pr_debug
move_module() pr_debug's "Final section addresses for $modname". Add section addresses to the message, for anyone looking at these. no functional changes. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Jim Cromie
|
b10addf37b |
module: add symbol-name to pr_debug Absolute symbol
The pr_debug("Absolute symbol" ..) reports value, (which is usually
0), but not the name, which is more informative. So add it.
no functional changes
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
||
|
Jim Cromie
|
6ed81802d4 |
module: in layout_sections, move_module: add the modname
layout_sections() and move_module() each issue ~50 messages for each module loaded. Add mod-name into their 2 header lines, to help the reader find his module. no functional changes. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
25be451aa4 |
module: fold usermode helper kmod into modules directory
The kernel/kmod.c is already only built if we enabled modules, so just stuff it under kernel/module/kmod.c and unify the MAINTAINERS file for it. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
3d40bb903e |
module: merge remnants of setup_load_info() to elf validation
The setup_load_info() was actually had ELF validation checks of its own. To later cache useful variables as an secondary step just means looping again over the ELF sections we just validated. We can simply keep tabs of the key sections of interest as we validate the module ELF section in one swoop, so do that and merge the two routines together. Expand a bit on the documentation / intent / goals. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
1bb49db991 |
module: move more elf validity checks to elf_validity_check()
The symbol and strings section validation currently happen in setup_load_info() but since they are also doing validity checks move this to elf_validity_check(). Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
c7ee8aebf6 |
module: add stop-grap sanity check on module memcpy()
The integrity of the struct module we load is important, and although our ELF validator already checks that the module section must match struct module, add a stop-gap check before we memcpy() the final minted module. This also makes those inspecting the code what the goal is. While at it, clarify the goal behind updating the sh_addr address. The current comment is pretty misleading. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Luis Chamberlain
|
46752820f9 |
module: add sanity check for ELF module section
The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |