linux/drivers/net/can/vcan.c
Vincent Mailhol b98aceb65e can: enable CAN XL for virtual CAN devices by default
In commit 97edec3a11 ("can: enable CAN FD for virtual CAN devices by
default"), vcan and vxcan default MTU was set to CANFD_MTU by default.
The reason was that users were confused on how to activate CAN FD on
virtual interfaces.

Following the introduction of CAN XL, the same logic should be
applied. Set the MTU to CANXL_MTU by default.

The users who really wish to use a Classical CAN only or a CAN FD
virtual device can do respectively:

  $ ip link set vcan0 mtu 16

or

  $ ip link set vcan0 mtu 72

to force the old behaviour.

Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-4-581bde113f52@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-24 17:05:34 +02:00

197 lines
5.6 KiB
C

/* vcan.c - Virtual CAN interface
*
* Copyright (c) 2002-2017 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/ethtool.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/can.h>
#include <linux/can/can-ml.h>
#include <linux/can/dev.h>
#include <linux/can/skb.h>
#include <linux/slab.h>
#include <net/rtnetlink.h>
#define DRV_NAME "vcan"
MODULE_DESCRIPTION("virtual CAN interface");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
MODULE_ALIAS_RTNL_LINK(DRV_NAME);
/* CAN test feature:
* Enable the echo on driver level for testing the CAN core echo modes.
* See Documentation/networking/can.rst for details.
*/
static bool echo; /* echo testing. Default: 0 (Off) */
module_param(echo, bool, 0444);
MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
{
struct net_device_stats *stats = &dev->stats;
stats->rx_packets++;
stats->rx_bytes += can_skb_get_data_len(skb);
skb->pkt_type = PACKET_BROADCAST;
skb->dev = dev;
skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx(skb);
}
static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
{
struct net_device_stats *stats = &dev->stats;
unsigned int len;
int loop;
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
len = can_skb_get_data_len(skb);
stats->tx_packets++;
stats->tx_bytes += len;
/* set flag whether this packet has to be looped back */
loop = skb->pkt_type == PACKET_LOOPBACK;
skb_tx_timestamp(skb);
if (!echo) {
/* no echo handling available inside this driver */
if (loop) {
/* only count the packets here, because the
* CAN core already did the echo for us
*/
stats->rx_packets++;
stats->rx_bytes += len;
}
consume_skb(skb);
return NETDEV_TX_OK;
}
/* perform standard echo handling for CAN network interfaces */
if (loop) {
skb = can_create_echo_skb(skb);
if (!skb)
return NETDEV_TX_OK;
/* receive with packet counting */
vcan_rx(skb, dev);
} else {
/* no looped packets => no counting */
consume_skb(skb);
}
return NETDEV_TX_OK;
}
static int vcan_change_mtu(struct net_device *dev, int new_mtu)
{
/* Do not allow changing the MTU while running */
if (dev->flags & IFF_UP)
return -EBUSY;
if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU &&
!can_is_canxl_dev_mtu(new_mtu))
return -EINVAL;
WRITE_ONCE(dev->mtu, new_mtu);
return 0;
}
static const struct net_device_ops vcan_netdev_ops = {
.ndo_start_xmit = vcan_tx,
.ndo_change_mtu = vcan_change_mtu,
};
static const struct ethtool_ops vcan_ethtool_ops = {
.get_ts_info = ethtool_op_get_ts_info,
};
static void vcan_setup(struct net_device *dev)
{
dev->type = ARPHRD_CAN;
dev->mtu = CANXL_MTU;
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 0;
dev->flags = IFF_NOARP;
can_set_ml_priv(dev, netdev_priv(dev));
/* set flags according to driver capabilities */
if (echo)
dev->flags |= IFF_ECHO;
dev->netdev_ops = &vcan_netdev_ops;
dev->ethtool_ops = &vcan_ethtool_ops;
dev->needs_free_netdev = true;
}
static struct rtnl_link_ops vcan_link_ops __read_mostly = {
.kind = DRV_NAME,
.priv_size = sizeof(struct can_ml_priv),
.setup = vcan_setup,
};
static __init int vcan_init_module(void)
{
pr_info("Virtual CAN interface driver\n");
if (echo)
pr_info("enabled echo on driver level.\n");
return rtnl_link_register(&vcan_link_ops);
}
static __exit void vcan_cleanup_module(void)
{
rtnl_link_unregister(&vcan_link_ops);
}
module_init(vcan_init_module);
module_exit(vcan_cleanup_module);