mirror of
				https://github.com/torvalds/linux.git
				synced 2025-10-30 00:06:59 +02:00 
			
		
		
		
	 d9b05321e2
			
		
	
	
		d9b05321e2
		
	
	
	
	
		
			
			To avoid a memory leak via mm_alloc() + mmdrop() the futex cleanup code
has been moved to __mmdrop(). This resulted in a warnings if the futex
hash table has been allocated via vmalloc() the mmdrop() was invoked
from atomic context.
The free path must stay in __mmput() to ensure it is invoked from
preemptible context.
In order to avoid the memory leak, delay the allocation of
mm_struct::mm->futex_ref to futex_hash_allocate(). This works because
neither the per-CPU counter nor the private hash has been allocated and
therefore
- futex_private_hash() callers (such as exit_pi_state_list()) don't
  acquire reference if there is no private hash yet. There is also no
  reference put.
- Regular callers (futex_hash()) fallback to global hash. No reference
  counting here.
The futex_ref member can be allocated in futex_hash_allocate() before
the private hash itself is allocated. This happens either while the
first thread is created or on request. In both cases the process has
just a single thread so there can be either futex operation in progress
or the request to create a private hash.
Move futex_hash_free() back to __mmput();
Move the allocation of mm_struct::futex_ref to futex_hash_allocate().
  [ bp: Fold a follow-up fix to prevent a use-after-free:
    https://lore.kernel.org/r/20250830213806.sEKuuGSm@linutronix.de ]
Fixes:  e703b7e247 ("futex: Move futex cleanup to __mmdrop()")
Closes: https://lore.kernel.org/all/20250821102721.6deae493@kernel.org/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lkml.kernel.org/r/20250822141238.PfnkTjFb@linutronix.de
		
	
			
		
			
				
	
	
		
			2012 lines
		
	
	
	
		
			51 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2012 lines
		
	
	
	
		
			51 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  *  Fast Userspace Mutexes (which I call "Futexes!").
 | |
|  *  (C) Rusty Russell, IBM 2002
 | |
|  *
 | |
|  *  Generalized futexes, futex requeueing, misc fixes by Ingo Molnar
 | |
|  *  (C) Copyright 2003 Red Hat Inc, All Rights Reserved
 | |
|  *
 | |
|  *  Removed page pinning, fix privately mapped COW pages and other cleanups
 | |
|  *  (C) Copyright 2003, 2004 Jamie Lokier
 | |
|  *
 | |
|  *  Robust futex support started by Ingo Molnar
 | |
|  *  (C) Copyright 2006 Red Hat Inc, All Rights Reserved
 | |
|  *  Thanks to Thomas Gleixner for suggestions, analysis and fixes.
 | |
|  *
 | |
|  *  PI-futex support started by Ingo Molnar and Thomas Gleixner
 | |
|  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
 | |
|  *  Copyright (C) 2006 Timesys Corp., Thomas Gleixner <tglx@timesys.com>
 | |
|  *
 | |
|  *  PRIVATE futexes by Eric Dumazet
 | |
|  *  Copyright (C) 2007 Eric Dumazet <dada1@cosmosbay.com>
 | |
|  *
 | |
|  *  Requeue-PI support by Darren Hart <dvhltc@us.ibm.com>
 | |
|  *  Copyright (C) IBM Corporation, 2009
 | |
|  *  Thanks to Thomas Gleixner for conceptual design and careful reviews.
 | |
|  *
 | |
|  *  Thanks to Ben LaHaise for yelling "hashed waitqueues" loudly
 | |
|  *  enough at me, Linus for the original (flawed) idea, Matthew
 | |
|  *  Kirkwood for proof-of-concept implementation.
 | |
|  *
 | |
|  *  "The futexes are also cursed."
 | |
|  *  "But they come in a choice of three flavours!"
 | |
|  */
 | |
| #include <linux/compat.h>
 | |
| #include <linux/jhash.h>
 | |
| #include <linux/pagemap.h>
 | |
| #include <linux/debugfs.h>
 | |
| #include <linux/plist.h>
 | |
| #include <linux/gfp.h>
 | |
| #include <linux/vmalloc.h>
 | |
| #include <linux/memblock.h>
 | |
| #include <linux/fault-inject.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/prctl.h>
 | |
| #include <linux/mempolicy.h>
 | |
| #include <linux/mmap_lock.h>
 | |
| 
 | |
| #include "futex.h"
 | |
| #include "../locking/rtmutex_common.h"
 | |
| 
 | |
| /*
 | |
|  * The base of the bucket array and its size are always used together
 | |
|  * (after initialization only in futex_hash()), so ensure that they
 | |
|  * reside in the same cacheline.
 | |
|  */
 | |
| static struct {
 | |
| 	unsigned long            hashmask;
 | |
| 	unsigned int		 hashshift;
 | |
| 	struct futex_hash_bucket *queues[MAX_NUMNODES];
 | |
| } __futex_data __read_mostly __aligned(2*sizeof(long));
 | |
| 
 | |
| #define futex_hashmask	(__futex_data.hashmask)
 | |
| #define futex_hashshift	(__futex_data.hashshift)
 | |
| #define futex_queues	(__futex_data.queues)
 | |
| 
 | |
| struct futex_private_hash {
 | |
| 	int		state;
 | |
| 	unsigned int	hash_mask;
 | |
| 	struct rcu_head	rcu;
 | |
| 	void		*mm;
 | |
| 	bool		custom;
 | |
| 	struct futex_hash_bucket queues[];
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Fault injections for futexes.
 | |
|  */
 | |
| #ifdef CONFIG_FAIL_FUTEX
 | |
| 
 | |
| static struct {
 | |
| 	struct fault_attr attr;
 | |
| 
 | |
| 	bool ignore_private;
 | |
| } fail_futex = {
 | |
| 	.attr = FAULT_ATTR_INITIALIZER,
 | |
| 	.ignore_private = false,
 | |
| };
 | |
| 
 | |
| static int __init setup_fail_futex(char *str)
 | |
| {
 | |
| 	return setup_fault_attr(&fail_futex.attr, str);
 | |
| }
 | |
| __setup("fail_futex=", setup_fail_futex);
 | |
| 
 | |
| bool should_fail_futex(bool fshared)
 | |
| {
 | |
| 	if (fail_futex.ignore_private && !fshared)
 | |
| 		return false;
 | |
| 
 | |
| 	return should_fail(&fail_futex.attr, 1);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
 | |
| 
 | |
| static int __init fail_futex_debugfs(void)
 | |
| {
 | |
| 	umode_t mode = S_IFREG | S_IRUSR | S_IWUSR;
 | |
| 	struct dentry *dir;
 | |
| 
 | |
| 	dir = fault_create_debugfs_attr("fail_futex", NULL,
 | |
| 					&fail_futex.attr);
 | |
| 	if (IS_ERR(dir))
 | |
| 		return PTR_ERR(dir);
 | |
| 
 | |
| 	debugfs_create_bool("ignore-private", mode, dir,
 | |
| 			    &fail_futex.ignore_private);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| late_initcall(fail_futex_debugfs);
 | |
| 
 | |
| #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
 | |
| 
 | |
| #endif /* CONFIG_FAIL_FUTEX */
 | |
| 
 | |
| static struct futex_hash_bucket *
 | |
| __futex_hash(union futex_key *key, struct futex_private_hash *fph);
 | |
| 
 | |
| #ifdef CONFIG_FUTEX_PRIVATE_HASH
 | |
| static bool futex_ref_get(struct futex_private_hash *fph);
 | |
| static bool futex_ref_put(struct futex_private_hash *fph);
 | |
| static bool futex_ref_is_dead(struct futex_private_hash *fph);
 | |
| 
 | |
| enum { FR_PERCPU = 0, FR_ATOMIC };
 | |
| 
 | |
| static inline bool futex_key_is_private(union futex_key *key)
 | |
| {
 | |
| 	/*
 | |
| 	 * Relies on get_futex_key() to set either bit for shared
 | |
| 	 * futexes -- see comment with union futex_key.
 | |
| 	 */
 | |
| 	return !(key->both.offset & (FUT_OFF_INODE | FUT_OFF_MMSHARED));
 | |
| }
 | |
| 
 | |
| static bool futex_private_hash_get(struct futex_private_hash *fph)
 | |
| {
 | |
| 	return futex_ref_get(fph);
 | |
| }
 | |
| 
 | |
| void futex_private_hash_put(struct futex_private_hash *fph)
 | |
| {
 | |
| 	if (futex_ref_put(fph))
 | |
| 		wake_up_var(fph->mm);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * futex_hash_get - Get an additional reference for the local hash.
 | |
|  * @hb:                    ptr to the private local hash.
 | |
|  *
 | |
|  * Obtain an additional reference for the already obtained hash bucket. The
 | |
|  * caller must already own an reference.
 | |
|  */
 | |
| void futex_hash_get(struct futex_hash_bucket *hb)
 | |
| {
 | |
| 	struct futex_private_hash *fph = hb->priv;
 | |
| 
 | |
| 	if (!fph)
 | |
| 		return;
 | |
| 	WARN_ON_ONCE(!futex_private_hash_get(fph));
 | |
| }
 | |
| 
 | |
| void futex_hash_put(struct futex_hash_bucket *hb)
 | |
| {
 | |
| 	struct futex_private_hash *fph = hb->priv;
 | |
| 
 | |
| 	if (!fph)
 | |
| 		return;
 | |
| 	futex_private_hash_put(fph);
 | |
| }
 | |
| 
 | |
| static struct futex_hash_bucket *
 | |
| __futex_hash_private(union futex_key *key, struct futex_private_hash *fph)
 | |
| {
 | |
| 	u32 hash;
 | |
| 
 | |
| 	if (!futex_key_is_private(key))
 | |
| 		return NULL;
 | |
| 
 | |
| 	if (!fph)
 | |
| 		fph = rcu_dereference(key->private.mm->futex_phash);
 | |
| 	if (!fph || !fph->hash_mask)
 | |
| 		return NULL;
 | |
| 
 | |
| 	hash = jhash2((void *)&key->private.address,
 | |
| 		      sizeof(key->private.address) / 4,
 | |
| 		      key->both.offset);
 | |
| 	return &fph->queues[hash & fph->hash_mask];
 | |
| }
 | |
| 
 | |
| static void futex_rehash_private(struct futex_private_hash *old,
 | |
| 				 struct futex_private_hash *new)
 | |
| {
 | |
| 	struct futex_hash_bucket *hb_old, *hb_new;
 | |
| 	unsigned int slots = old->hash_mask + 1;
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	for (i = 0; i < slots; i++) {
 | |
| 		struct futex_q *this, *tmp;
 | |
| 
 | |
| 		hb_old = &old->queues[i];
 | |
| 
 | |
| 		spin_lock(&hb_old->lock);
 | |
| 		plist_for_each_entry_safe(this, tmp, &hb_old->chain, list) {
 | |
| 
 | |
| 			plist_del(&this->list, &hb_old->chain);
 | |
| 			futex_hb_waiters_dec(hb_old);
 | |
| 
 | |
| 			WARN_ON_ONCE(this->lock_ptr != &hb_old->lock);
 | |
| 
 | |
| 			hb_new = __futex_hash(&this->key, new);
 | |
| 			futex_hb_waiters_inc(hb_new);
 | |
| 			/*
 | |
| 			 * The new pointer isn't published yet but an already
 | |
| 			 * moved user can be unqueued due to timeout or signal.
 | |
| 			 */
 | |
| 			spin_lock_nested(&hb_new->lock, SINGLE_DEPTH_NESTING);
 | |
| 			plist_add(&this->list, &hb_new->chain);
 | |
| 			this->lock_ptr = &hb_new->lock;
 | |
| 			spin_unlock(&hb_new->lock);
 | |
| 		}
 | |
| 		spin_unlock(&hb_old->lock);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static bool __futex_pivot_hash(struct mm_struct *mm,
 | |
| 			       struct futex_private_hash *new)
 | |
| {
 | |
| 	struct futex_private_hash *fph;
 | |
| 
 | |
| 	WARN_ON_ONCE(mm->futex_phash_new);
 | |
| 
 | |
| 	fph = rcu_dereference_protected(mm->futex_phash,
 | |
| 					lockdep_is_held(&mm->futex_hash_lock));
 | |
| 	if (fph) {
 | |
| 		if (!futex_ref_is_dead(fph)) {
 | |
| 			mm->futex_phash_new = new;
 | |
| 			return false;
 | |
| 		}
 | |
| 
 | |
| 		futex_rehash_private(fph, new);
 | |
| 	}
 | |
| 	new->state = FR_PERCPU;
 | |
| 	scoped_guard(rcu) {
 | |
| 		mm->futex_batches = get_state_synchronize_rcu();
 | |
| 		rcu_assign_pointer(mm->futex_phash, new);
 | |
| 	}
 | |
| 	kvfree_rcu(fph, rcu);
 | |
| 	return true;
 | |
| }
 | |
| 
 | |
| static void futex_pivot_hash(struct mm_struct *mm)
 | |
| {
 | |
| 	scoped_guard(mutex, &mm->futex_hash_lock) {
 | |
| 		struct futex_private_hash *fph;
 | |
| 
 | |
| 		fph = mm->futex_phash_new;
 | |
| 		if (fph) {
 | |
| 			mm->futex_phash_new = NULL;
 | |
| 			__futex_pivot_hash(mm, fph);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| struct futex_private_hash *futex_private_hash(void)
 | |
| {
 | |
| 	struct mm_struct *mm = current->mm;
 | |
| 	/*
 | |
| 	 * Ideally we don't loop. If there is a replacement in progress
 | |
| 	 * then a new private hash is already prepared and a reference can't be
 | |
| 	 * obtained once the last user dropped it's.
 | |
| 	 * In that case we block on mm_struct::futex_hash_lock and either have
 | |
| 	 * to perform the replacement or wait while someone else is doing the
 | |
| 	 * job. Eitherway, on the second iteration we acquire a reference on the
 | |
| 	 * new private hash or loop again because a new replacement has been
 | |
| 	 * requested.
 | |
| 	 */
 | |
| again:
 | |
| 	scoped_guard(rcu) {
 | |
| 		struct futex_private_hash *fph;
 | |
| 
 | |
| 		fph = rcu_dereference(mm->futex_phash);
 | |
| 		if (!fph)
 | |
| 			return NULL;
 | |
| 
 | |
| 		if (futex_private_hash_get(fph))
 | |
| 			return fph;
 | |
| 	}
 | |
| 	futex_pivot_hash(mm);
 | |
| 	goto again;
 | |
| }
 | |
| 
 | |
| struct futex_hash_bucket *futex_hash(union futex_key *key)
 | |
| {
 | |
| 	struct futex_private_hash *fph;
 | |
| 	struct futex_hash_bucket *hb;
 | |
| 
 | |
| again:
 | |
| 	scoped_guard(rcu) {
 | |
| 		hb = __futex_hash(key, NULL);
 | |
| 		fph = hb->priv;
 | |
| 
 | |
| 		if (!fph || futex_private_hash_get(fph))
 | |
| 			return hb;
 | |
| 	}
 | |
| 	futex_pivot_hash(key->private.mm);
 | |
| 	goto again;
 | |
| }
 | |
| 
 | |
| #else /* !CONFIG_FUTEX_PRIVATE_HASH */
 | |
| 
 | |
| static struct futex_hash_bucket *
 | |
| __futex_hash_private(union futex_key *key, struct futex_private_hash *fph)
 | |
| {
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| struct futex_hash_bucket *futex_hash(union futex_key *key)
 | |
| {
 | |
| 	return __futex_hash(key, NULL);
 | |
| }
 | |
| 
 | |
| #endif /* CONFIG_FUTEX_PRIVATE_HASH */
 | |
| 
 | |
| #ifdef CONFIG_FUTEX_MPOL
 | |
| 
 | |
| static int __futex_key_to_node(struct mm_struct *mm, unsigned long addr)
 | |
| {
 | |
| 	struct vm_area_struct *vma = vma_lookup(mm, addr);
 | |
| 	struct mempolicy *mpol;
 | |
| 	int node = FUTEX_NO_NODE;
 | |
| 
 | |
| 	if (!vma)
 | |
| 		return FUTEX_NO_NODE;
 | |
| 
 | |
| 	mpol = vma_policy(vma);
 | |
| 	if (!mpol)
 | |
| 		return FUTEX_NO_NODE;
 | |
| 
 | |
| 	switch (mpol->mode) {
 | |
| 	case MPOL_PREFERRED:
 | |
| 		node = first_node(mpol->nodes);
 | |
| 		break;
 | |
| 	case MPOL_PREFERRED_MANY:
 | |
| 	case MPOL_BIND:
 | |
| 		if (mpol->home_node != NUMA_NO_NODE)
 | |
| 			node = mpol->home_node;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return node;
 | |
| }
 | |
| 
 | |
| static int futex_key_to_node_opt(struct mm_struct *mm, unsigned long addr)
 | |
| {
 | |
| 	int seq, node;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 
 | |
| 	if (!mmap_lock_speculate_try_begin(mm, &seq))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	node = __futex_key_to_node(mm, addr);
 | |
| 
 | |
| 	if (mmap_lock_speculate_retry(mm, seq))
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	return node;
 | |
| }
 | |
| 
 | |
| static int futex_mpol(struct mm_struct *mm, unsigned long addr)
 | |
| {
 | |
| 	int node;
 | |
| 
 | |
| 	node = futex_key_to_node_opt(mm, addr);
 | |
| 	if (node >= FUTEX_NO_NODE)
 | |
| 		return node;
 | |
| 
 | |
| 	guard(mmap_read_lock)(mm);
 | |
| 	return __futex_key_to_node(mm, addr);
 | |
| }
 | |
| 
 | |
| #else /* !CONFIG_FUTEX_MPOL */
 | |
| 
 | |
| static int futex_mpol(struct mm_struct *mm, unsigned long addr)
 | |
| {
 | |
| 	return FUTEX_NO_NODE;
 | |
| }
 | |
| 
 | |
| #endif /* CONFIG_FUTEX_MPOL */
 | |
| 
 | |
| /**
 | |
|  * __futex_hash - Return the hash bucket
 | |
|  * @key:	Pointer to the futex key for which the hash is calculated
 | |
|  * @fph:	Pointer to private hash if known
 | |
|  *
 | |
|  * We hash on the keys returned from get_futex_key (see below) and return the
 | |
|  * corresponding hash bucket.
 | |
|  * If the FUTEX is PROCESS_PRIVATE then a per-process hash bucket (from the
 | |
|  * private hash) is returned if existing. Otherwise a hash bucket from the
 | |
|  * global hash is returned.
 | |
|  */
 | |
| static struct futex_hash_bucket *
 | |
| __futex_hash(union futex_key *key, struct futex_private_hash *fph)
 | |
| {
 | |
| 	int node = key->both.node;
 | |
| 	u32 hash;
 | |
| 
 | |
| 	if (node == FUTEX_NO_NODE) {
 | |
| 		struct futex_hash_bucket *hb;
 | |
| 
 | |
| 		hb = __futex_hash_private(key, fph);
 | |
| 		if (hb)
 | |
| 			return hb;
 | |
| 	}
 | |
| 
 | |
| 	hash = jhash2((u32 *)key,
 | |
| 		      offsetof(typeof(*key), both.offset) / sizeof(u32),
 | |
| 		      key->both.offset);
 | |
| 
 | |
| 	if (node == FUTEX_NO_NODE) {
 | |
| 		/*
 | |
| 		 * In case of !FLAGS_NUMA, use some unused hash bits to pick a
 | |
| 		 * node -- this ensures regular futexes are interleaved across
 | |
| 		 * the nodes and avoids having to allocate multiple
 | |
| 		 * hash-tables.
 | |
| 		 *
 | |
| 		 * NOTE: this isn't perfectly uniform, but it is fast and
 | |
| 		 * handles sparse node masks.
 | |
| 		 */
 | |
| 		node = (hash >> futex_hashshift) % nr_node_ids;
 | |
| 		if (!node_possible(node)) {
 | |
| 			node = find_next_bit_wrap(node_possible_map.bits,
 | |
| 						  nr_node_ids, node);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return &futex_queues[node][hash & futex_hashmask];
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * futex_setup_timer - set up the sleeping hrtimer.
 | |
|  * @time:	ptr to the given timeout value
 | |
|  * @timeout:	the hrtimer_sleeper structure to be set up
 | |
|  * @flags:	futex flags
 | |
|  * @range_ns:	optional range in ns
 | |
|  *
 | |
|  * Return: Initialized hrtimer_sleeper structure or NULL if no timeout
 | |
|  *	   value given
 | |
|  */
 | |
| struct hrtimer_sleeper *
 | |
| futex_setup_timer(ktime_t *time, struct hrtimer_sleeper *timeout,
 | |
| 		  int flags, u64 range_ns)
 | |
| {
 | |
| 	if (!time)
 | |
| 		return NULL;
 | |
| 
 | |
| 	hrtimer_setup_sleeper_on_stack(timeout,
 | |
| 				       (flags & FLAGS_CLOCKRT) ? CLOCK_REALTIME : CLOCK_MONOTONIC,
 | |
| 				       HRTIMER_MODE_ABS);
 | |
| 	/*
 | |
| 	 * If range_ns is 0, calling hrtimer_set_expires_range_ns() is
 | |
| 	 * effectively the same as calling hrtimer_set_expires().
 | |
| 	 */
 | |
| 	hrtimer_set_expires_range_ns(&timeout->timer, *time, range_ns);
 | |
| 
 | |
| 	return timeout;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Generate a machine wide unique identifier for this inode.
 | |
|  *
 | |
|  * This relies on u64 not wrapping in the life-time of the machine; which with
 | |
|  * 1ns resolution means almost 585 years.
 | |
|  *
 | |
|  * This further relies on the fact that a well formed program will not unmap
 | |
|  * the file while it has a (shared) futex waiting on it. This mapping will have
 | |
|  * a file reference which pins the mount and inode.
 | |
|  *
 | |
|  * If for some reason an inode gets evicted and read back in again, it will get
 | |
|  * a new sequence number and will _NOT_ match, even though it is the exact same
 | |
|  * file.
 | |
|  *
 | |
|  * It is important that futex_match() will never have a false-positive, esp.
 | |
|  * for PI futexes that can mess up the state. The above argues that false-negatives
 | |
|  * are only possible for malformed programs.
 | |
|  */
 | |
| static u64 get_inode_sequence_number(struct inode *inode)
 | |
| {
 | |
| 	static atomic64_t i_seq;
 | |
| 	u64 old;
 | |
| 
 | |
| 	/* Does the inode already have a sequence number? */
 | |
| 	old = atomic64_read(&inode->i_sequence);
 | |
| 	if (likely(old))
 | |
| 		return old;
 | |
| 
 | |
| 	for (;;) {
 | |
| 		u64 new = atomic64_inc_return(&i_seq);
 | |
| 		if (WARN_ON_ONCE(!new))
 | |
| 			continue;
 | |
| 
 | |
| 		old = 0;
 | |
| 		if (!atomic64_try_cmpxchg_relaxed(&inode->i_sequence, &old, new))
 | |
| 			return old;
 | |
| 		return new;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * get_futex_key() - Get parameters which are the keys for a futex
 | |
|  * @uaddr:	virtual address of the futex
 | |
|  * @flags:	FLAGS_*
 | |
|  * @key:	address where result is stored.
 | |
|  * @rw:		mapping needs to be read/write (values: FUTEX_READ,
 | |
|  *              FUTEX_WRITE)
 | |
|  *
 | |
|  * Return: a negative error code or 0
 | |
|  *
 | |
|  * The key words are stored in @key on success.
 | |
|  *
 | |
|  * For shared mappings (when @fshared), the key is:
 | |
|  *
 | |
|  *   ( inode->i_sequence, page offset within mapping, offset_within_page )
 | |
|  *
 | |
|  * [ also see get_inode_sequence_number() ]
 | |
|  *
 | |
|  * For private mappings (or when !@fshared), the key is:
 | |
|  *
 | |
|  *   ( current->mm, address, 0 )
 | |
|  *
 | |
|  * This allows (cross process, where applicable) identification of the futex
 | |
|  * without keeping the page pinned for the duration of the FUTEX_WAIT.
 | |
|  *
 | |
|  * lock_page() might sleep, the caller should not hold a spinlock.
 | |
|  */
 | |
| int get_futex_key(u32 __user *uaddr, unsigned int flags, union futex_key *key,
 | |
| 		  enum futex_access rw)
 | |
| {
 | |
| 	unsigned long address = (unsigned long)uaddr;
 | |
| 	struct mm_struct *mm = current->mm;
 | |
| 	struct page *page;
 | |
| 	struct folio *folio;
 | |
| 	struct address_space *mapping;
 | |
| 	int node, err, size, ro = 0;
 | |
| 	bool node_updated = false;
 | |
| 	bool fshared;
 | |
| 
 | |
| 	fshared = flags & FLAGS_SHARED;
 | |
| 	size = futex_size(flags);
 | |
| 	if (flags & FLAGS_NUMA)
 | |
| 		size *= 2;
 | |
| 
 | |
| 	/*
 | |
| 	 * The futex address must be "naturally" aligned.
 | |
| 	 */
 | |
| 	key->both.offset = address % PAGE_SIZE;
 | |
| 	if (unlikely((address % size) != 0))
 | |
| 		return -EINVAL;
 | |
| 	address -= key->both.offset;
 | |
| 
 | |
| 	if (unlikely(!access_ok(uaddr, size)))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	if (unlikely(should_fail_futex(fshared)))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	node = FUTEX_NO_NODE;
 | |
| 
 | |
| 	if (flags & FLAGS_NUMA) {
 | |
| 		u32 __user *naddr = (void *)uaddr + size / 2;
 | |
| 
 | |
| 		if (futex_get_value(&node, naddr))
 | |
| 			return -EFAULT;
 | |
| 
 | |
| 		if ((node != FUTEX_NO_NODE) &&
 | |
| 		    ((unsigned int)node >= MAX_NUMNODES || !node_possible(node)))
 | |
| 			return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (node == FUTEX_NO_NODE && (flags & FLAGS_MPOL)) {
 | |
| 		node = futex_mpol(mm, address);
 | |
| 		node_updated = true;
 | |
| 	}
 | |
| 
 | |
| 	if (flags & FLAGS_NUMA) {
 | |
| 		u32 __user *naddr = (void *)uaddr + size / 2;
 | |
| 
 | |
| 		if (node == FUTEX_NO_NODE) {
 | |
| 			node = numa_node_id();
 | |
| 			node_updated = true;
 | |
| 		}
 | |
| 		if (node_updated && futex_put_value(node, naddr))
 | |
| 			return -EFAULT;
 | |
| 	}
 | |
| 
 | |
| 	key->both.node = node;
 | |
| 
 | |
| 	/*
 | |
| 	 * PROCESS_PRIVATE futexes are fast.
 | |
| 	 * As the mm cannot disappear under us and the 'key' only needs
 | |
| 	 * virtual address, we dont even have to find the underlying vma.
 | |
| 	 * Note : We do have to check 'uaddr' is a valid user address,
 | |
| 	 *        but access_ok() should be faster than find_vma()
 | |
| 	 */
 | |
| 	if (!fshared) {
 | |
| 		/*
 | |
| 		 * On no-MMU, shared futexes are treated as private, therefore
 | |
| 		 * we must not include the current process in the key. Since
 | |
| 		 * there is only one address space, the address is a unique key
 | |
| 		 * on its own.
 | |
| 		 */
 | |
| 		if (IS_ENABLED(CONFIG_MMU))
 | |
| 			key->private.mm = mm;
 | |
| 		else
 | |
| 			key->private.mm = NULL;
 | |
| 
 | |
| 		key->private.address = address;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| again:
 | |
| 	/* Ignore any VERIFY_READ mapping (futex common case) */
 | |
| 	if (unlikely(should_fail_futex(true)))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	err = get_user_pages_fast(address, 1, FOLL_WRITE, &page);
 | |
| 	/*
 | |
| 	 * If write access is not required (eg. FUTEX_WAIT), try
 | |
| 	 * and get read-only access.
 | |
| 	 */
 | |
| 	if (err == -EFAULT && rw == FUTEX_READ) {
 | |
| 		err = get_user_pages_fast(address, 1, 0, &page);
 | |
| 		ro = 1;
 | |
| 	}
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 	else
 | |
| 		err = 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * The treatment of mapping from this point on is critical. The folio
 | |
| 	 * lock protects many things but in this context the folio lock
 | |
| 	 * stabilizes mapping, prevents inode freeing in the shared
 | |
| 	 * file-backed region case and guards against movement to swap cache.
 | |
| 	 *
 | |
| 	 * Strictly speaking the folio lock is not needed in all cases being
 | |
| 	 * considered here and folio lock forces unnecessarily serialization.
 | |
| 	 * From this point on, mapping will be re-verified if necessary and
 | |
| 	 * folio lock will be acquired only if it is unavoidable
 | |
| 	 *
 | |
| 	 * Mapping checks require the folio so it is looked up now. For
 | |
| 	 * anonymous pages, it does not matter if the folio is split
 | |
| 	 * in the future as the key is based on the address. For
 | |
| 	 * filesystem-backed pages, the precise page is required as the
 | |
| 	 * index of the page determines the key.
 | |
| 	 */
 | |
| 	folio = page_folio(page);
 | |
| 	mapping = READ_ONCE(folio->mapping);
 | |
| 
 | |
| 	/*
 | |
| 	 * If folio->mapping is NULL, then it cannot be an anonymous
 | |
| 	 * page; but it might be the ZERO_PAGE or in the gate area or
 | |
| 	 * in a special mapping (all cases which we are happy to fail);
 | |
| 	 * or it may have been a good file page when get_user_pages_fast
 | |
| 	 * found it, but truncated or holepunched or subjected to
 | |
| 	 * invalidate_complete_page2 before we got the folio lock (also
 | |
| 	 * cases which we are happy to fail).  And we hold a reference,
 | |
| 	 * so refcount care in invalidate_inode_page's remove_mapping
 | |
| 	 * prevents drop_caches from setting mapping to NULL beneath us.
 | |
| 	 *
 | |
| 	 * The case we do have to guard against is when memory pressure made
 | |
| 	 * shmem_writepage move it from filecache to swapcache beneath us:
 | |
| 	 * an unlikely race, but we do need to retry for folio->mapping.
 | |
| 	 */
 | |
| 	if (unlikely(!mapping)) {
 | |
| 		int shmem_swizzled;
 | |
| 
 | |
| 		/*
 | |
| 		 * Folio lock is required to identify which special case above
 | |
| 		 * applies. If this is really a shmem page then the folio lock
 | |
| 		 * will prevent unexpected transitions.
 | |
| 		 */
 | |
| 		folio_lock(folio);
 | |
| 		shmem_swizzled = folio_test_swapcache(folio) || folio->mapping;
 | |
| 		folio_unlock(folio);
 | |
| 		folio_put(folio);
 | |
| 
 | |
| 		if (shmem_swizzled)
 | |
| 			goto again;
 | |
| 
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Private mappings are handled in a simple way.
 | |
| 	 *
 | |
| 	 * If the futex key is stored in anonymous memory, then the associated
 | |
| 	 * object is the mm which is implicitly pinned by the calling process.
 | |
| 	 *
 | |
| 	 * NOTE: When userspace waits on a MAP_SHARED mapping, even if
 | |
| 	 * it's a read-only handle, it's expected that futexes attach to
 | |
| 	 * the object not the particular process.
 | |
| 	 */
 | |
| 	if (folio_test_anon(folio)) {
 | |
| 		/*
 | |
| 		 * A RO anonymous page will never change and thus doesn't make
 | |
| 		 * sense for futex operations.
 | |
| 		 */
 | |
| 		if (unlikely(should_fail_futex(true)) || ro) {
 | |
| 			err = -EFAULT;
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		key->both.offset |= FUT_OFF_MMSHARED; /* ref taken on mm */
 | |
| 		key->private.mm = mm;
 | |
| 		key->private.address = address;
 | |
| 
 | |
| 	} else {
 | |
| 		struct inode *inode;
 | |
| 
 | |
| 		/*
 | |
| 		 * The associated futex object in this case is the inode and
 | |
| 		 * the folio->mapping must be traversed. Ordinarily this should
 | |
| 		 * be stabilised under folio lock but it's not strictly
 | |
| 		 * necessary in this case as we just want to pin the inode, not
 | |
| 		 * update i_pages or anything like that.
 | |
| 		 *
 | |
| 		 * The RCU read lock is taken as the inode is finally freed
 | |
| 		 * under RCU. If the mapping still matches expectations then the
 | |
| 		 * mapping->host can be safely accessed as being a valid inode.
 | |
| 		 */
 | |
| 		rcu_read_lock();
 | |
| 
 | |
| 		if (READ_ONCE(folio->mapping) != mapping) {
 | |
| 			rcu_read_unlock();
 | |
| 			folio_put(folio);
 | |
| 
 | |
| 			goto again;
 | |
| 		}
 | |
| 
 | |
| 		inode = READ_ONCE(mapping->host);
 | |
| 		if (!inode) {
 | |
| 			rcu_read_unlock();
 | |
| 			folio_put(folio);
 | |
| 
 | |
| 			goto again;
 | |
| 		}
 | |
| 
 | |
| 		key->both.offset |= FUT_OFF_INODE; /* inode-based key */
 | |
| 		key->shared.i_seq = get_inode_sequence_number(inode);
 | |
| 		key->shared.pgoff = page_pgoff(folio, page);
 | |
| 		rcu_read_unlock();
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	folio_put(folio);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * fault_in_user_writeable() - Fault in user address and verify RW access
 | |
|  * @uaddr:	pointer to faulting user space address
 | |
|  *
 | |
|  * Slow path to fixup the fault we just took in the atomic write
 | |
|  * access to @uaddr.
 | |
|  *
 | |
|  * We have no generic implementation of a non-destructive write to the
 | |
|  * user address. We know that we faulted in the atomic pagefault
 | |
|  * disabled section so we can as well avoid the #PF overhead by
 | |
|  * calling get_user_pages() right away.
 | |
|  */
 | |
| int fault_in_user_writeable(u32 __user *uaddr)
 | |
| {
 | |
| 	struct mm_struct *mm = current->mm;
 | |
| 	int ret;
 | |
| 
 | |
| 	mmap_read_lock(mm);
 | |
| 	ret = fixup_user_fault(mm, (unsigned long)uaddr,
 | |
| 			       FAULT_FLAG_WRITE, NULL);
 | |
| 	mmap_read_unlock(mm);
 | |
| 
 | |
| 	return ret < 0 ? ret : 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * futex_top_waiter() - Return the highest priority waiter on a futex
 | |
|  * @hb:		the hash bucket the futex_q's reside in
 | |
|  * @key:	the futex key (to distinguish it from other futex futex_q's)
 | |
|  *
 | |
|  * Must be called with the hb lock held.
 | |
|  */
 | |
| struct futex_q *futex_top_waiter(struct futex_hash_bucket *hb, union futex_key *key)
 | |
| {
 | |
| 	struct futex_q *this;
 | |
| 
 | |
| 	plist_for_each_entry(this, &hb->chain, list) {
 | |
| 		if (futex_match(&this->key, key))
 | |
| 			return this;
 | |
| 	}
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * wait_for_owner_exiting - Block until the owner has exited
 | |
|  * @ret: owner's current futex lock status
 | |
|  * @exiting:	Pointer to the exiting task
 | |
|  *
 | |
|  * Caller must hold a refcount on @exiting.
 | |
|  */
 | |
| void wait_for_owner_exiting(int ret, struct task_struct *exiting)
 | |
| {
 | |
| 	if (ret != -EBUSY) {
 | |
| 		WARN_ON_ONCE(exiting);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (WARN_ON_ONCE(ret == -EBUSY && !exiting))
 | |
| 		return;
 | |
| 
 | |
| 	mutex_lock(&exiting->futex_exit_mutex);
 | |
| 	/*
 | |
| 	 * No point in doing state checking here. If the waiter got here
 | |
| 	 * while the task was in exec()->exec_futex_release() then it can
 | |
| 	 * have any FUTEX_STATE_* value when the waiter has acquired the
 | |
| 	 * mutex. OK, if running, EXITING or DEAD if it reached exit()
 | |
| 	 * already. Highly unlikely and not a problem. Just one more round
 | |
| 	 * through the futex maze.
 | |
| 	 */
 | |
| 	mutex_unlock(&exiting->futex_exit_mutex);
 | |
| 
 | |
| 	put_task_struct(exiting);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * __futex_unqueue() - Remove the futex_q from its futex_hash_bucket
 | |
|  * @q:	The futex_q to unqueue
 | |
|  *
 | |
|  * The q->lock_ptr must not be NULL and must be held by the caller.
 | |
|  */
 | |
| void __futex_unqueue(struct futex_q *q)
 | |
| {
 | |
| 	struct futex_hash_bucket *hb;
 | |
| 
 | |
| 	if (WARN_ON_SMP(!q->lock_ptr) || WARN_ON(plist_node_empty(&q->list)))
 | |
| 		return;
 | |
| 	lockdep_assert_held(q->lock_ptr);
 | |
| 
 | |
| 	hb = container_of(q->lock_ptr, struct futex_hash_bucket, lock);
 | |
| 	plist_del(&q->list, &hb->chain);
 | |
| 	futex_hb_waiters_dec(hb);
 | |
| }
 | |
| 
 | |
| /* The key must be already stored in q->key. */
 | |
| void futex_q_lock(struct futex_q *q, struct futex_hash_bucket *hb)
 | |
| 	__acquires(&hb->lock)
 | |
| {
 | |
| 	/*
 | |
| 	 * Increment the counter before taking the lock so that
 | |
| 	 * a potential waker won't miss a to-be-slept task that is
 | |
| 	 * waiting for the spinlock. This is safe as all futex_q_lock()
 | |
| 	 * users end up calling futex_queue(). Similarly, for housekeeping,
 | |
| 	 * decrement the counter at futex_q_unlock() when some error has
 | |
| 	 * occurred and we don't end up adding the task to the list.
 | |
| 	 */
 | |
| 	futex_hb_waiters_inc(hb); /* implies smp_mb(); (A) */
 | |
| 
 | |
| 	q->lock_ptr = &hb->lock;
 | |
| 
 | |
| 	spin_lock(&hb->lock);
 | |
| }
 | |
| 
 | |
| void futex_q_unlock(struct futex_hash_bucket *hb)
 | |
| 	__releases(&hb->lock)
 | |
| {
 | |
| 	futex_hb_waiters_dec(hb);
 | |
| 	spin_unlock(&hb->lock);
 | |
| }
 | |
| 
 | |
| void __futex_queue(struct futex_q *q, struct futex_hash_bucket *hb,
 | |
| 		   struct task_struct *task)
 | |
| {
 | |
| 	int prio;
 | |
| 
 | |
| 	/*
 | |
| 	 * The priority used to register this element is
 | |
| 	 * - either the real thread-priority for the real-time threads
 | |
| 	 * (i.e. threads with a priority lower than MAX_RT_PRIO)
 | |
| 	 * - or MAX_RT_PRIO for non-RT threads.
 | |
| 	 * Thus, all RT-threads are woken first in priority order, and
 | |
| 	 * the others are woken last, in FIFO order.
 | |
| 	 */
 | |
| 	prio = min(current->normal_prio, MAX_RT_PRIO);
 | |
| 
 | |
| 	plist_node_init(&q->list, prio);
 | |
| 	plist_add(&q->list, &hb->chain);
 | |
| 	q->task = task;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * futex_unqueue() - Remove the futex_q from its futex_hash_bucket
 | |
|  * @q:	The futex_q to unqueue
 | |
|  *
 | |
|  * The q->lock_ptr must not be held by the caller. A call to futex_unqueue() must
 | |
|  * be paired with exactly one earlier call to futex_queue().
 | |
|  *
 | |
|  * Return:
 | |
|  *  - 1 - if the futex_q was still queued (and we removed unqueued it);
 | |
|  *  - 0 - if the futex_q was already removed by the waking thread
 | |
|  */
 | |
| int futex_unqueue(struct futex_q *q)
 | |
| {
 | |
| 	spinlock_t *lock_ptr;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* RCU so lock_ptr is not going away during locking. */
 | |
| 	guard(rcu)();
 | |
| 	/* In the common case we don't take the spinlock, which is nice. */
 | |
| retry:
 | |
| 	/*
 | |
| 	 * q->lock_ptr can change between this read and the following spin_lock.
 | |
| 	 * Use READ_ONCE to forbid the compiler from reloading q->lock_ptr and
 | |
| 	 * optimizing lock_ptr out of the logic below.
 | |
| 	 */
 | |
| 	lock_ptr = READ_ONCE(q->lock_ptr);
 | |
| 	if (lock_ptr != NULL) {
 | |
| 		spin_lock(lock_ptr);
 | |
| 		/*
 | |
| 		 * q->lock_ptr can change between reading it and
 | |
| 		 * spin_lock(), causing us to take the wrong lock.  This
 | |
| 		 * corrects the race condition.
 | |
| 		 *
 | |
| 		 * Reasoning goes like this: if we have the wrong lock,
 | |
| 		 * q->lock_ptr must have changed (maybe several times)
 | |
| 		 * between reading it and the spin_lock().  It can
 | |
| 		 * change again after the spin_lock() but only if it was
 | |
| 		 * already changed before the spin_lock().  It cannot,
 | |
| 		 * however, change back to the original value.  Therefore
 | |
| 		 * we can detect whether we acquired the correct lock.
 | |
| 		 */
 | |
| 		if (unlikely(lock_ptr != q->lock_ptr)) {
 | |
| 			spin_unlock(lock_ptr);
 | |
| 			goto retry;
 | |
| 		}
 | |
| 		__futex_unqueue(q);
 | |
| 
 | |
| 		BUG_ON(q->pi_state);
 | |
| 
 | |
| 		spin_unlock(lock_ptr);
 | |
| 		ret = 1;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| void futex_q_lockptr_lock(struct futex_q *q)
 | |
| {
 | |
| 	spinlock_t *lock_ptr;
 | |
| 
 | |
| 	/*
 | |
| 	 * See futex_unqueue() why lock_ptr can change.
 | |
| 	 */
 | |
| 	guard(rcu)();
 | |
| retry:
 | |
| 	lock_ptr = READ_ONCE(q->lock_ptr);
 | |
| 	spin_lock(lock_ptr);
 | |
| 
 | |
| 	if (unlikely(lock_ptr != q->lock_ptr)) {
 | |
| 		spin_unlock(lock_ptr);
 | |
| 		goto retry;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * PI futexes can not be requeued and must remove themselves from the hash
 | |
|  * bucket. The hash bucket lock (i.e. lock_ptr) is held.
 | |
|  */
 | |
| void futex_unqueue_pi(struct futex_q *q)
 | |
| {
 | |
| 	/*
 | |
| 	 * If the lock was not acquired (due to timeout or signal) then the
 | |
| 	 * rt_waiter is removed before futex_q is. If this is observed by
 | |
| 	 * an unlocker after dropping the rtmutex wait lock and before
 | |
| 	 * acquiring the hash bucket lock, then the unlocker dequeues the
 | |
| 	 * futex_q from the hash bucket list to guarantee consistent state
 | |
| 	 * vs. userspace. Therefore the dequeue here must be conditional.
 | |
| 	 */
 | |
| 	if (!plist_node_empty(&q->list))
 | |
| 		__futex_unqueue(q);
 | |
| 
 | |
| 	BUG_ON(!q->pi_state);
 | |
| 	put_pi_state(q->pi_state);
 | |
| 	q->pi_state = NULL;
 | |
| }
 | |
| 
 | |
| /* Constants for the pending_op argument of handle_futex_death */
 | |
| #define HANDLE_DEATH_PENDING	true
 | |
| #define HANDLE_DEATH_LIST	false
 | |
| 
 | |
| /*
 | |
|  * Process a futex-list entry, check whether it's owned by the
 | |
|  * dying task, and do notification if so:
 | |
|  */
 | |
| static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
 | |
| 			      bool pi, bool pending_op)
 | |
| {
 | |
| 	u32 uval, nval, mval;
 | |
| 	pid_t owner;
 | |
| 	int err;
 | |
| 
 | |
| 	/* Futex address must be 32bit aligned */
 | |
| 	if ((((unsigned long)uaddr) % sizeof(*uaddr)) != 0)
 | |
| 		return -1;
 | |
| 
 | |
| retry:
 | |
| 	if (get_user(uval, uaddr))
 | |
| 		return -1;
 | |
| 
 | |
| 	/*
 | |
| 	 * Special case for regular (non PI) futexes. The unlock path in
 | |
| 	 * user space has two race scenarios:
 | |
| 	 *
 | |
| 	 * 1. The unlock path releases the user space futex value and
 | |
| 	 *    before it can execute the futex() syscall to wake up
 | |
| 	 *    waiters it is killed.
 | |
| 	 *
 | |
| 	 * 2. A woken up waiter is killed before it can acquire the
 | |
| 	 *    futex in user space.
 | |
| 	 *
 | |
| 	 * In the second case, the wake up notification could be generated
 | |
| 	 * by the unlock path in user space after setting the futex value
 | |
| 	 * to zero or by the kernel after setting the OWNER_DIED bit below.
 | |
| 	 *
 | |
| 	 * In both cases the TID validation below prevents a wakeup of
 | |
| 	 * potential waiters which can cause these waiters to block
 | |
| 	 * forever.
 | |
| 	 *
 | |
| 	 * In both cases the following conditions are met:
 | |
| 	 *
 | |
| 	 *	1) task->robust_list->list_op_pending != NULL
 | |
| 	 *	   @pending_op == true
 | |
| 	 *	2) The owner part of user space futex value == 0
 | |
| 	 *	3) Regular futex: @pi == false
 | |
| 	 *
 | |
| 	 * If these conditions are met, it is safe to attempt waking up a
 | |
| 	 * potential waiter without touching the user space futex value and
 | |
| 	 * trying to set the OWNER_DIED bit. If the futex value is zero,
 | |
| 	 * the rest of the user space mutex state is consistent, so a woken
 | |
| 	 * waiter will just take over the uncontended futex. Setting the
 | |
| 	 * OWNER_DIED bit would create inconsistent state and malfunction
 | |
| 	 * of the user space owner died handling. Otherwise, the OWNER_DIED
 | |
| 	 * bit is already set, and the woken waiter is expected to deal with
 | |
| 	 * this.
 | |
| 	 */
 | |
| 	owner = uval & FUTEX_TID_MASK;
 | |
| 
 | |
| 	if (pending_op && !pi && !owner) {
 | |
| 		futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1,
 | |
| 			   FUTEX_BITSET_MATCH_ANY);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	if (owner != task_pid_vnr(curr))
 | |
| 		return 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * Ok, this dying thread is truly holding a futex
 | |
| 	 * of interest. Set the OWNER_DIED bit atomically
 | |
| 	 * via cmpxchg, and if the value had FUTEX_WAITERS
 | |
| 	 * set, wake up a waiter (if any). (We have to do a
 | |
| 	 * futex_wake() even if OWNER_DIED is already set -
 | |
| 	 * to handle the rare but possible case of recursive
 | |
| 	 * thread-death.) The rest of the cleanup is done in
 | |
| 	 * userspace.
 | |
| 	 */
 | |
| 	mval = (uval & FUTEX_WAITERS) | FUTEX_OWNER_DIED;
 | |
| 
 | |
| 	/*
 | |
| 	 * We are not holding a lock here, but we want to have
 | |
| 	 * the pagefault_disable/enable() protection because
 | |
| 	 * we want to handle the fault gracefully. If the
 | |
| 	 * access fails we try to fault in the futex with R/W
 | |
| 	 * verification via get_user_pages. get_user() above
 | |
| 	 * does not guarantee R/W access. If that fails we
 | |
| 	 * give up and leave the futex locked.
 | |
| 	 */
 | |
| 	if ((err = futex_cmpxchg_value_locked(&nval, uaddr, uval, mval))) {
 | |
| 		switch (err) {
 | |
| 		case -EFAULT:
 | |
| 			if (fault_in_user_writeable(uaddr))
 | |
| 				return -1;
 | |
| 			goto retry;
 | |
| 
 | |
| 		case -EAGAIN:
 | |
| 			cond_resched();
 | |
| 			goto retry;
 | |
| 
 | |
| 		default:
 | |
| 			WARN_ON_ONCE(1);
 | |
| 			return err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (nval != uval)
 | |
| 		goto retry;
 | |
| 
 | |
| 	/*
 | |
| 	 * Wake robust non-PI futexes here. The wakeup of
 | |
| 	 * PI futexes happens in exit_pi_state():
 | |
| 	 */
 | |
| 	if (!pi && (uval & FUTEX_WAITERS)) {
 | |
| 		futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1,
 | |
| 			   FUTEX_BITSET_MATCH_ANY);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Fetch a robust-list pointer. Bit 0 signals PI futexes:
 | |
|  */
 | |
| static inline int fetch_robust_entry(struct robust_list __user **entry,
 | |
| 				     struct robust_list __user * __user *head,
 | |
| 				     unsigned int *pi)
 | |
| {
 | |
| 	unsigned long uentry;
 | |
| 
 | |
| 	if (get_user(uentry, (unsigned long __user *)head))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	*entry = (void __user *)(uentry & ~1UL);
 | |
| 	*pi = uentry & 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Walk curr->robust_list (very carefully, it's a userspace list!)
 | |
|  * and mark any locks found there dead, and notify any waiters.
 | |
|  *
 | |
|  * We silently return on any sign of list-walking problem.
 | |
|  */
 | |
| static void exit_robust_list(struct task_struct *curr)
 | |
| {
 | |
| 	struct robust_list_head __user *head = curr->robust_list;
 | |
| 	struct robust_list __user *entry, *next_entry, *pending;
 | |
| 	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
 | |
| 	unsigned int next_pi;
 | |
| 	unsigned long futex_offset;
 | |
| 	int rc;
 | |
| 
 | |
| 	/*
 | |
| 	 * Fetch the list head (which was registered earlier, via
 | |
| 	 * sys_set_robust_list()):
 | |
| 	 */
 | |
| 	if (fetch_robust_entry(&entry, &head->list.next, &pi))
 | |
| 		return;
 | |
| 	/*
 | |
| 	 * Fetch the relative futex offset:
 | |
| 	 */
 | |
| 	if (get_user(futex_offset, &head->futex_offset))
 | |
| 		return;
 | |
| 	/*
 | |
| 	 * Fetch any possibly pending lock-add first, and handle it
 | |
| 	 * if it exists:
 | |
| 	 */
 | |
| 	if (fetch_robust_entry(&pending, &head->list_op_pending, &pip))
 | |
| 		return;
 | |
| 
 | |
| 	next_entry = NULL;	/* avoid warning with gcc */
 | |
| 	while (entry != &head->list) {
 | |
| 		/*
 | |
| 		 * Fetch the next entry in the list before calling
 | |
| 		 * handle_futex_death:
 | |
| 		 */
 | |
| 		rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi);
 | |
| 		/*
 | |
| 		 * A pending lock might already be on the list, so
 | |
| 		 * don't process it twice:
 | |
| 		 */
 | |
| 		if (entry != pending) {
 | |
| 			if (handle_futex_death((void __user *)entry + futex_offset,
 | |
| 						curr, pi, HANDLE_DEATH_LIST))
 | |
| 				return;
 | |
| 		}
 | |
| 		if (rc)
 | |
| 			return;
 | |
| 		entry = next_entry;
 | |
| 		pi = next_pi;
 | |
| 		/*
 | |
| 		 * Avoid excessively long or circular lists:
 | |
| 		 */
 | |
| 		if (!--limit)
 | |
| 			break;
 | |
| 
 | |
| 		cond_resched();
 | |
| 	}
 | |
| 
 | |
| 	if (pending) {
 | |
| 		handle_futex_death((void __user *)pending + futex_offset,
 | |
| 				   curr, pip, HANDLE_DEATH_PENDING);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_COMPAT
 | |
| static void __user *futex_uaddr(struct robust_list __user *entry,
 | |
| 				compat_long_t futex_offset)
 | |
| {
 | |
| 	compat_uptr_t base = ptr_to_compat(entry);
 | |
| 	void __user *uaddr = compat_ptr(base + futex_offset);
 | |
| 
 | |
| 	return uaddr;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Fetch a robust-list pointer. Bit 0 signals PI futexes:
 | |
|  */
 | |
| static inline int
 | |
| compat_fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry,
 | |
| 		   compat_uptr_t __user *head, unsigned int *pi)
 | |
| {
 | |
| 	if (get_user(*uentry, head))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	*entry = compat_ptr((*uentry) & ~1);
 | |
| 	*pi = (unsigned int)(*uentry) & 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Walk curr->robust_list (very carefully, it's a userspace list!)
 | |
|  * and mark any locks found there dead, and notify any waiters.
 | |
|  *
 | |
|  * We silently return on any sign of list-walking problem.
 | |
|  */
 | |
| static void compat_exit_robust_list(struct task_struct *curr)
 | |
| {
 | |
| 	struct compat_robust_list_head __user *head = curr->compat_robust_list;
 | |
| 	struct robust_list __user *entry, *next_entry, *pending;
 | |
| 	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
 | |
| 	unsigned int next_pi;
 | |
| 	compat_uptr_t uentry, next_uentry, upending;
 | |
| 	compat_long_t futex_offset;
 | |
| 	int rc;
 | |
| 
 | |
| 	/*
 | |
| 	 * Fetch the list head (which was registered earlier, via
 | |
| 	 * sys_set_robust_list()):
 | |
| 	 */
 | |
| 	if (compat_fetch_robust_entry(&uentry, &entry, &head->list.next, &pi))
 | |
| 		return;
 | |
| 	/*
 | |
| 	 * Fetch the relative futex offset:
 | |
| 	 */
 | |
| 	if (get_user(futex_offset, &head->futex_offset))
 | |
| 		return;
 | |
| 	/*
 | |
| 	 * Fetch any possibly pending lock-add first, and handle it
 | |
| 	 * if it exists:
 | |
| 	 */
 | |
| 	if (compat_fetch_robust_entry(&upending, &pending,
 | |
| 			       &head->list_op_pending, &pip))
 | |
| 		return;
 | |
| 
 | |
| 	next_entry = NULL;	/* avoid warning with gcc */
 | |
| 	while (entry != (struct robust_list __user *) &head->list) {
 | |
| 		/*
 | |
| 		 * Fetch the next entry in the list before calling
 | |
| 		 * handle_futex_death:
 | |
| 		 */
 | |
| 		rc = compat_fetch_robust_entry(&next_uentry, &next_entry,
 | |
| 			(compat_uptr_t __user *)&entry->next, &next_pi);
 | |
| 		/*
 | |
| 		 * A pending lock might already be on the list, so
 | |
| 		 * dont process it twice:
 | |
| 		 */
 | |
| 		if (entry != pending) {
 | |
| 			void __user *uaddr = futex_uaddr(entry, futex_offset);
 | |
| 
 | |
| 			if (handle_futex_death(uaddr, curr, pi,
 | |
| 					       HANDLE_DEATH_LIST))
 | |
| 				return;
 | |
| 		}
 | |
| 		if (rc)
 | |
| 			return;
 | |
| 		uentry = next_uentry;
 | |
| 		entry = next_entry;
 | |
| 		pi = next_pi;
 | |
| 		/*
 | |
| 		 * Avoid excessively long or circular lists:
 | |
| 		 */
 | |
| 		if (!--limit)
 | |
| 			break;
 | |
| 
 | |
| 		cond_resched();
 | |
| 	}
 | |
| 	if (pending) {
 | |
| 		void __user *uaddr = futex_uaddr(pending, futex_offset);
 | |
| 
 | |
| 		handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING);
 | |
| 	}
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_FUTEX_PI
 | |
| 
 | |
| /*
 | |
|  * This task is holding PI mutexes at exit time => bad.
 | |
|  * Kernel cleans up PI-state, but userspace is likely hosed.
 | |
|  * (Robust-futex cleanup is separate and might save the day for userspace.)
 | |
|  */
 | |
| static void exit_pi_state_list(struct task_struct *curr)
 | |
| {
 | |
| 	struct list_head *next, *head = &curr->pi_state_list;
 | |
| 	struct futex_pi_state *pi_state;
 | |
| 	union futex_key key = FUTEX_KEY_INIT;
 | |
| 
 | |
| 	/*
 | |
| 	 * The mutex mm_struct::futex_hash_lock might be acquired.
 | |
| 	 */
 | |
| 	might_sleep();
 | |
| 	/*
 | |
| 	 * Ensure the hash remains stable (no resize) during the while loop
 | |
| 	 * below. The hb pointer is acquired under the pi_lock so we can't block
 | |
| 	 * on the mutex.
 | |
| 	 */
 | |
| 	WARN_ON(curr != current);
 | |
| 	guard(private_hash)();
 | |
| 	/*
 | |
| 	 * We are a ZOMBIE and nobody can enqueue itself on
 | |
| 	 * pi_state_list anymore, but we have to be careful
 | |
| 	 * versus waiters unqueueing themselves:
 | |
| 	 */
 | |
| 	raw_spin_lock_irq(&curr->pi_lock);
 | |
| 	while (!list_empty(head)) {
 | |
| 		next = head->next;
 | |
| 		pi_state = list_entry(next, struct futex_pi_state, list);
 | |
| 		key = pi_state->key;
 | |
| 		if (1) {
 | |
| 			CLASS(hb, hb)(&key);
 | |
| 
 | |
| 			/*
 | |
| 			 * We can race against put_pi_state() removing itself from the
 | |
| 			 * list (a waiter going away). put_pi_state() will first
 | |
| 			 * decrement the reference count and then modify the list, so
 | |
| 			 * its possible to see the list entry but fail this reference
 | |
| 			 * acquire.
 | |
| 			 *
 | |
| 			 * In that case; drop the locks to let put_pi_state() make
 | |
| 			 * progress and retry the loop.
 | |
| 			 */
 | |
| 			if (!refcount_inc_not_zero(&pi_state->refcount)) {
 | |
| 				raw_spin_unlock_irq(&curr->pi_lock);
 | |
| 				cpu_relax();
 | |
| 				raw_spin_lock_irq(&curr->pi_lock);
 | |
| 				continue;
 | |
| 			}
 | |
| 			raw_spin_unlock_irq(&curr->pi_lock);
 | |
| 
 | |
| 			spin_lock(&hb->lock);
 | |
| 			raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock);
 | |
| 			raw_spin_lock(&curr->pi_lock);
 | |
| 			/*
 | |
| 			 * We dropped the pi-lock, so re-check whether this
 | |
| 			 * task still owns the PI-state:
 | |
| 			 */
 | |
| 			if (head->next != next) {
 | |
| 				/* retain curr->pi_lock for the loop invariant */
 | |
| 				raw_spin_unlock(&pi_state->pi_mutex.wait_lock);
 | |
| 				spin_unlock(&hb->lock);
 | |
| 				put_pi_state(pi_state);
 | |
| 				continue;
 | |
| 			}
 | |
| 
 | |
| 			WARN_ON(pi_state->owner != curr);
 | |
| 			WARN_ON(list_empty(&pi_state->list));
 | |
| 			list_del_init(&pi_state->list);
 | |
| 			pi_state->owner = NULL;
 | |
| 
 | |
| 			raw_spin_unlock(&curr->pi_lock);
 | |
| 			raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock);
 | |
| 			spin_unlock(&hb->lock);
 | |
| 		}
 | |
| 
 | |
| 		rt_mutex_futex_unlock(&pi_state->pi_mutex);
 | |
| 		put_pi_state(pi_state);
 | |
| 
 | |
| 		raw_spin_lock_irq(&curr->pi_lock);
 | |
| 	}
 | |
| 	raw_spin_unlock_irq(&curr->pi_lock);
 | |
| }
 | |
| #else
 | |
| static inline void exit_pi_state_list(struct task_struct *curr) { }
 | |
| #endif
 | |
| 
 | |
| static void futex_cleanup(struct task_struct *tsk)
 | |
| {
 | |
| 	if (unlikely(tsk->robust_list)) {
 | |
| 		exit_robust_list(tsk);
 | |
| 		tsk->robust_list = NULL;
 | |
| 	}
 | |
| 
 | |
| #ifdef CONFIG_COMPAT
 | |
| 	if (unlikely(tsk->compat_robust_list)) {
 | |
| 		compat_exit_robust_list(tsk);
 | |
| 		tsk->compat_robust_list = NULL;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	if (unlikely(!list_empty(&tsk->pi_state_list)))
 | |
| 		exit_pi_state_list(tsk);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD
 | |
|  * @tsk:	task to set the state on
 | |
|  *
 | |
|  * Set the futex exit state of the task lockless. The futex waiter code
 | |
|  * observes that state when a task is exiting and loops until the task has
 | |
|  * actually finished the futex cleanup. The worst case for this is that the
 | |
|  * waiter runs through the wait loop until the state becomes visible.
 | |
|  *
 | |
|  * This is called from the recursive fault handling path in make_task_dead().
 | |
|  *
 | |
|  * This is best effort. Either the futex exit code has run already or
 | |
|  * not. If the OWNER_DIED bit has been set on the futex then the waiter can
 | |
|  * take it over. If not, the problem is pushed back to user space. If the
 | |
|  * futex exit code did not run yet, then an already queued waiter might
 | |
|  * block forever, but there is nothing which can be done about that.
 | |
|  */
 | |
| void futex_exit_recursive(struct task_struct *tsk)
 | |
| {
 | |
| 	/* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */
 | |
| 	if (tsk->futex_state == FUTEX_STATE_EXITING)
 | |
| 		mutex_unlock(&tsk->futex_exit_mutex);
 | |
| 	tsk->futex_state = FUTEX_STATE_DEAD;
 | |
| }
 | |
| 
 | |
| static void futex_cleanup_begin(struct task_struct *tsk)
 | |
| {
 | |
| 	/*
 | |
| 	 * Prevent various race issues against a concurrent incoming waiter
 | |
| 	 * including live locks by forcing the waiter to block on
 | |
| 	 * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in
 | |
| 	 * attach_to_pi_owner().
 | |
| 	 */
 | |
| 	mutex_lock(&tsk->futex_exit_mutex);
 | |
| 
 | |
| 	/*
 | |
| 	 * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock.
 | |
| 	 *
 | |
| 	 * This ensures that all subsequent checks of tsk->futex_state in
 | |
| 	 * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with
 | |
| 	 * tsk->pi_lock held.
 | |
| 	 *
 | |
| 	 * It guarantees also that a pi_state which was queued right before
 | |
| 	 * the state change under tsk->pi_lock by a concurrent waiter must
 | |
| 	 * be observed in exit_pi_state_list().
 | |
| 	 */
 | |
| 	raw_spin_lock_irq(&tsk->pi_lock);
 | |
| 	tsk->futex_state = FUTEX_STATE_EXITING;
 | |
| 	raw_spin_unlock_irq(&tsk->pi_lock);
 | |
| }
 | |
| 
 | |
| static void futex_cleanup_end(struct task_struct *tsk, int state)
 | |
| {
 | |
| 	/*
 | |
| 	 * Lockless store. The only side effect is that an observer might
 | |
| 	 * take another loop until it becomes visible.
 | |
| 	 */
 | |
| 	tsk->futex_state = state;
 | |
| 	/*
 | |
| 	 * Drop the exit protection. This unblocks waiters which observed
 | |
| 	 * FUTEX_STATE_EXITING to reevaluate the state.
 | |
| 	 */
 | |
| 	mutex_unlock(&tsk->futex_exit_mutex);
 | |
| }
 | |
| 
 | |
| void futex_exec_release(struct task_struct *tsk)
 | |
| {
 | |
| 	/*
 | |
| 	 * The state handling is done for consistency, but in the case of
 | |
| 	 * exec() there is no way to prevent further damage as the PID stays
 | |
| 	 * the same. But for the unlikely and arguably buggy case that a
 | |
| 	 * futex is held on exec(), this provides at least as much state
 | |
| 	 * consistency protection which is possible.
 | |
| 	 */
 | |
| 	futex_cleanup_begin(tsk);
 | |
| 	futex_cleanup(tsk);
 | |
| 	/*
 | |
| 	 * Reset the state to FUTEX_STATE_OK. The task is alive and about
 | |
| 	 * exec a new binary.
 | |
| 	 */
 | |
| 	futex_cleanup_end(tsk, FUTEX_STATE_OK);
 | |
| }
 | |
| 
 | |
| void futex_exit_release(struct task_struct *tsk)
 | |
| {
 | |
| 	futex_cleanup_begin(tsk);
 | |
| 	futex_cleanup(tsk);
 | |
| 	futex_cleanup_end(tsk, FUTEX_STATE_DEAD);
 | |
| }
 | |
| 
 | |
| static void futex_hash_bucket_init(struct futex_hash_bucket *fhb,
 | |
| 				   struct futex_private_hash *fph)
 | |
| {
 | |
| #ifdef CONFIG_FUTEX_PRIVATE_HASH
 | |
| 	fhb->priv = fph;
 | |
| #endif
 | |
| 	atomic_set(&fhb->waiters, 0);
 | |
| 	plist_head_init(&fhb->chain);
 | |
| 	spin_lock_init(&fhb->lock);
 | |
| }
 | |
| 
 | |
| #define FH_CUSTOM	0x01
 | |
| 
 | |
| #ifdef CONFIG_FUTEX_PRIVATE_HASH
 | |
| 
 | |
| /*
 | |
|  * futex-ref
 | |
|  *
 | |
|  * Heavily inspired by percpu-rwsem/percpu-refcount; not reusing any of that
 | |
|  * code because it just doesn't fit right.
 | |
|  *
 | |
|  * Dual counter, per-cpu / atomic approach like percpu-refcount, except it
 | |
|  * re-initializes the state automatically, such that the fph swizzle is also a
 | |
|  * transition back to per-cpu.
 | |
|  */
 | |
| 
 | |
| static void futex_ref_rcu(struct rcu_head *head);
 | |
| 
 | |
| static void __futex_ref_atomic_begin(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 
 | |
| 	/*
 | |
| 	 * The counter we're about to switch to must have fully switched;
 | |
| 	 * otherwise it would be impossible for it to have reported success
 | |
| 	 * from futex_ref_is_dead().
 | |
| 	 */
 | |
| 	WARN_ON_ONCE(atomic_long_read(&mm->futex_atomic) != 0);
 | |
| 
 | |
| 	/*
 | |
| 	 * Set the atomic to the bias value such that futex_ref_{get,put}()
 | |
| 	 * will never observe 0. Will be fixed up in __futex_ref_atomic_end()
 | |
| 	 * when folding in the percpu count.
 | |
| 	 */
 | |
| 	atomic_long_set(&mm->futex_atomic, LONG_MAX);
 | |
| 	smp_store_release(&fph->state, FR_ATOMIC);
 | |
| 
 | |
| 	call_rcu_hurry(&mm->futex_rcu, futex_ref_rcu);
 | |
| }
 | |
| 
 | |
| static void __futex_ref_atomic_end(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 	unsigned int count = 0;
 | |
| 	long ret;
 | |
| 	int cpu;
 | |
| 
 | |
| 	/*
 | |
| 	 * Per __futex_ref_atomic_begin() the state of the fph must be ATOMIC
 | |
| 	 * and per this RCU callback, everybody must now observe this state and
 | |
| 	 * use the atomic variable.
 | |
| 	 */
 | |
| 	WARN_ON_ONCE(fph->state != FR_ATOMIC);
 | |
| 
 | |
| 	/*
 | |
| 	 * Therefore the per-cpu counter is now stable, sum and reset.
 | |
| 	 */
 | |
| 	for_each_possible_cpu(cpu) {
 | |
| 		unsigned int *ptr = per_cpu_ptr(mm->futex_ref, cpu);
 | |
| 		count += *ptr;
 | |
| 		*ptr = 0;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Re-init for the next cycle.
 | |
| 	 */
 | |
| 	this_cpu_inc(*mm->futex_ref); /* 0 -> 1 */
 | |
| 
 | |
| 	/*
 | |
| 	 * Add actual count, subtract bias and initial refcount.
 | |
| 	 *
 | |
| 	 * The moment this atomic operation happens, futex_ref_is_dead() can
 | |
| 	 * become true.
 | |
| 	 */
 | |
| 	ret = atomic_long_add_return(count - LONG_MAX - 1, &mm->futex_atomic);
 | |
| 	if (!ret)
 | |
| 		wake_up_var(mm);
 | |
| 
 | |
| 	WARN_ON_ONCE(ret < 0);
 | |
| 	mmput_async(mm);
 | |
| }
 | |
| 
 | |
| static void futex_ref_rcu(struct rcu_head *head)
 | |
| {
 | |
| 	struct mm_struct *mm = container_of(head, struct mm_struct, futex_rcu);
 | |
| 	struct futex_private_hash *fph = rcu_dereference_raw(mm->futex_phash);
 | |
| 
 | |
| 	if (fph->state == FR_PERCPU) {
 | |
| 		/*
 | |
| 		 * Per this extra grace-period, everybody must now observe
 | |
| 		 * fph as the current fph and no previously observed fph's
 | |
| 		 * are in-flight.
 | |
| 		 *
 | |
| 		 * Notably, nobody will now rely on the atomic
 | |
| 		 * futex_ref_is_dead() state anymore so we can begin the
 | |
| 		 * migration of the per-cpu counter into the atomic.
 | |
| 		 */
 | |
| 		__futex_ref_atomic_begin(fph);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	__futex_ref_atomic_end(fph);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Drop the initial refcount and transition to atomics.
 | |
|  */
 | |
| static void futex_ref_drop(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 
 | |
| 	/*
 | |
| 	 * Can only transition the current fph;
 | |
| 	 */
 | |
| 	WARN_ON_ONCE(rcu_dereference_raw(mm->futex_phash) != fph);
 | |
| 	/*
 | |
| 	 * We enqueue at least one RCU callback. Ensure mm stays if the task
 | |
| 	 * exits before the transition is completed.
 | |
| 	 */
 | |
| 	mmget(mm);
 | |
| 
 | |
| 	/*
 | |
| 	 * In order to avoid the following scenario:
 | |
| 	 *
 | |
| 	 * futex_hash()			__futex_pivot_hash()
 | |
| 	 *   guard(rcu);		  guard(mm->futex_hash_lock);
 | |
| 	 *   fph = mm->futex_phash;
 | |
| 	 *				  rcu_assign_pointer(&mm->futex_phash, new);
 | |
| 	 *				futex_hash_allocate()
 | |
| 	 *				  futex_ref_drop()
 | |
| 	 *				    fph->state = FR_ATOMIC;
 | |
| 	 *				    atomic_set(, BIAS);
 | |
| 	 *
 | |
| 	 *   futex_private_hash_get(fph); // OOPS
 | |
| 	 *
 | |
| 	 * Where an old fph (which is FR_ATOMIC) and should fail on
 | |
| 	 * inc_not_zero, will succeed because a new transition is started and
 | |
| 	 * the atomic is bias'ed away from 0.
 | |
| 	 *
 | |
| 	 * There must be at least one full grace-period between publishing a
 | |
| 	 * new fph and trying to replace it.
 | |
| 	 */
 | |
| 	if (poll_state_synchronize_rcu(mm->futex_batches)) {
 | |
| 		/*
 | |
| 		 * There was a grace-period, we can begin now.
 | |
| 		 */
 | |
| 		__futex_ref_atomic_begin(fph);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	call_rcu_hurry(&mm->futex_rcu, futex_ref_rcu);
 | |
| }
 | |
| 
 | |
| static bool futex_ref_get(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 
 | |
| 	if (smp_load_acquire(&fph->state) == FR_PERCPU) {
 | |
| 		this_cpu_inc(*mm->futex_ref);
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return atomic_long_inc_not_zero(&mm->futex_atomic);
 | |
| }
 | |
| 
 | |
| static bool futex_ref_put(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 
 | |
| 	if (smp_load_acquire(&fph->state) == FR_PERCPU) {
 | |
| 		this_cpu_dec(*mm->futex_ref);
 | |
| 		return false;
 | |
| 	}
 | |
| 
 | |
| 	return atomic_long_dec_and_test(&mm->futex_atomic);
 | |
| }
 | |
| 
 | |
| static bool futex_ref_is_dead(struct futex_private_hash *fph)
 | |
| {
 | |
| 	struct mm_struct *mm = fph->mm;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 
 | |
| 	if (smp_load_acquire(&fph->state) == FR_PERCPU)
 | |
| 		return false;
 | |
| 
 | |
| 	return atomic_long_read(&mm->futex_atomic) == 0;
 | |
| }
 | |
| 
 | |
| int futex_mm_init(struct mm_struct *mm)
 | |
| {
 | |
| 	mutex_init(&mm->futex_hash_lock);
 | |
| 	RCU_INIT_POINTER(mm->futex_phash, NULL);
 | |
| 	mm->futex_phash_new = NULL;
 | |
| 	/* futex-ref */
 | |
| 	mm->futex_ref = NULL;
 | |
| 	atomic_long_set(&mm->futex_atomic, 0);
 | |
| 	mm->futex_batches = get_state_synchronize_rcu();
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void futex_hash_free(struct mm_struct *mm)
 | |
| {
 | |
| 	struct futex_private_hash *fph;
 | |
| 
 | |
| 	free_percpu(mm->futex_ref);
 | |
| 	kvfree(mm->futex_phash_new);
 | |
| 	fph = rcu_dereference_raw(mm->futex_phash);
 | |
| 	if (fph)
 | |
| 		kvfree(fph);
 | |
| }
 | |
| 
 | |
| static bool futex_pivot_pending(struct mm_struct *mm)
 | |
| {
 | |
| 	struct futex_private_hash *fph;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 
 | |
| 	if (!mm->futex_phash_new)
 | |
| 		return true;
 | |
| 
 | |
| 	fph = rcu_dereference(mm->futex_phash);
 | |
| 	return futex_ref_is_dead(fph);
 | |
| }
 | |
| 
 | |
| static bool futex_hash_less(struct futex_private_hash *a,
 | |
| 			    struct futex_private_hash *b)
 | |
| {
 | |
| 	/* user provided always wins */
 | |
| 	if (!a->custom && b->custom)
 | |
| 		return true;
 | |
| 	if (a->custom && !b->custom)
 | |
| 		return false;
 | |
| 
 | |
| 	/* zero-sized hash wins */
 | |
| 	if (!b->hash_mask)
 | |
| 		return true;
 | |
| 	if (!a->hash_mask)
 | |
| 		return false;
 | |
| 
 | |
| 	/* keep the biggest */
 | |
| 	if (a->hash_mask < b->hash_mask)
 | |
| 		return true;
 | |
| 	if (a->hash_mask > b->hash_mask)
 | |
| 		return false;
 | |
| 
 | |
| 	return false; /* equal */
 | |
| }
 | |
| 
 | |
| static int futex_hash_allocate(unsigned int hash_slots, unsigned int flags)
 | |
| {
 | |
| 	struct mm_struct *mm = current->mm;
 | |
| 	struct futex_private_hash *fph;
 | |
| 	bool custom = flags & FH_CUSTOM;
 | |
| 	int i;
 | |
| 
 | |
| 	if (hash_slots && (hash_slots == 1 || !is_power_of_2(hash_slots)))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/*
 | |
| 	 * Once we've disabled the global hash there is no way back.
 | |
| 	 */
 | |
| 	scoped_guard(rcu) {
 | |
| 		fph = rcu_dereference(mm->futex_phash);
 | |
| 		if (fph && !fph->hash_mask) {
 | |
| 			if (custom)
 | |
| 				return -EBUSY;
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!mm->futex_ref) {
 | |
| 		/*
 | |
| 		 * This will always be allocated by the first thread and
 | |
| 		 * therefore requires no locking.
 | |
| 		 */
 | |
| 		mm->futex_ref = alloc_percpu(unsigned int);
 | |
| 		if (!mm->futex_ref)
 | |
| 			return -ENOMEM;
 | |
| 		this_cpu_inc(*mm->futex_ref); /* 0 -> 1 */
 | |
| 	}
 | |
| 
 | |
| 	fph = kvzalloc(struct_size(fph, queues, hash_slots),
 | |
| 		       GFP_KERNEL_ACCOUNT | __GFP_NOWARN);
 | |
| 	if (!fph)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	fph->hash_mask = hash_slots ? hash_slots - 1 : 0;
 | |
| 	fph->custom = custom;
 | |
| 	fph->mm = mm;
 | |
| 
 | |
| 	for (i = 0; i < hash_slots; i++)
 | |
| 		futex_hash_bucket_init(&fph->queues[i], fph);
 | |
| 
 | |
| 	if (custom) {
 | |
| 		/*
 | |
| 		 * Only let prctl() wait / retry; don't unduly delay clone().
 | |
| 		 */
 | |
| again:
 | |
| 		wait_var_event(mm, futex_pivot_pending(mm));
 | |
| 	}
 | |
| 
 | |
| 	scoped_guard(mutex, &mm->futex_hash_lock) {
 | |
| 		struct futex_private_hash *free __free(kvfree) = NULL;
 | |
| 		struct futex_private_hash *cur, *new;
 | |
| 
 | |
| 		cur = rcu_dereference_protected(mm->futex_phash,
 | |
| 						lockdep_is_held(&mm->futex_hash_lock));
 | |
| 		new = mm->futex_phash_new;
 | |
| 		mm->futex_phash_new = NULL;
 | |
| 
 | |
| 		if (fph) {
 | |
| 			if (cur && !cur->hash_mask) {
 | |
| 				/*
 | |
| 				 * If two threads simultaneously request the global
 | |
| 				 * hash then the first one performs the switch,
 | |
| 				 * the second one returns here.
 | |
| 				 */
 | |
| 				free = fph;
 | |
| 				mm->futex_phash_new = new;
 | |
| 				return -EBUSY;
 | |
| 			}
 | |
| 			if (cur && !new) {
 | |
| 				/*
 | |
| 				 * If we have an existing hash, but do not yet have
 | |
| 				 * allocated a replacement hash, drop the initial
 | |
| 				 * reference on the existing hash.
 | |
| 				 */
 | |
| 				futex_ref_drop(cur);
 | |
| 			}
 | |
| 
 | |
| 			if (new) {
 | |
| 				/*
 | |
| 				 * Two updates raced; throw out the lesser one.
 | |
| 				 */
 | |
| 				if (futex_hash_less(new, fph)) {
 | |
| 					free = new;
 | |
| 					new = fph;
 | |
| 				} else {
 | |
| 					free = fph;
 | |
| 				}
 | |
| 			} else {
 | |
| 				new = fph;
 | |
| 			}
 | |
| 			fph = NULL;
 | |
| 		}
 | |
| 
 | |
| 		if (new) {
 | |
| 			/*
 | |
| 			 * Will set mm->futex_phash_new on failure;
 | |
| 			 * futex_private_hash_get() will try again.
 | |
| 			 */
 | |
| 			if (!__futex_pivot_hash(mm, new) && custom)
 | |
| 				goto again;
 | |
| 		}
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int futex_hash_allocate_default(void)
 | |
| {
 | |
| 	unsigned int threads, buckets, current_buckets = 0;
 | |
| 	struct futex_private_hash *fph;
 | |
| 
 | |
| 	if (!current->mm)
 | |
| 		return 0;
 | |
| 
 | |
| 	scoped_guard(rcu) {
 | |
| 		threads = min_t(unsigned int,
 | |
| 				get_nr_threads(current),
 | |
| 				num_online_cpus());
 | |
| 
 | |
| 		fph = rcu_dereference(current->mm->futex_phash);
 | |
| 		if (fph) {
 | |
| 			if (fph->custom)
 | |
| 				return 0;
 | |
| 
 | |
| 			current_buckets = fph->hash_mask + 1;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * The default allocation will remain within
 | |
| 	 *   16 <= threads * 4 <= global hash size
 | |
| 	 */
 | |
| 	buckets = roundup_pow_of_two(4 * threads);
 | |
| 	buckets = clamp(buckets, 16, futex_hashmask + 1);
 | |
| 
 | |
| 	if (current_buckets >= buckets)
 | |
| 		return 0;
 | |
| 
 | |
| 	return futex_hash_allocate(buckets, 0);
 | |
| }
 | |
| 
 | |
| static int futex_hash_get_slots(void)
 | |
| {
 | |
| 	struct futex_private_hash *fph;
 | |
| 
 | |
| 	guard(rcu)();
 | |
| 	fph = rcu_dereference(current->mm->futex_phash);
 | |
| 	if (fph && fph->hash_mask)
 | |
| 		return fph->hash_mask + 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #else
 | |
| 
 | |
| static int futex_hash_allocate(unsigned int hash_slots, unsigned int flags)
 | |
| {
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static int futex_hash_get_slots(void)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #endif
 | |
| 
 | |
| int futex_hash_prctl(unsigned long arg2, unsigned long arg3, unsigned long arg4)
 | |
| {
 | |
| 	unsigned int flags = FH_CUSTOM;
 | |
| 	int ret;
 | |
| 
 | |
| 	switch (arg2) {
 | |
| 	case PR_FUTEX_HASH_SET_SLOTS:
 | |
| 		if (arg4)
 | |
| 			return -EINVAL;
 | |
| 		ret = futex_hash_allocate(arg3, flags);
 | |
| 		break;
 | |
| 
 | |
| 	case PR_FUTEX_HASH_GET_SLOTS:
 | |
| 		ret = futex_hash_get_slots();
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		ret = -EINVAL;
 | |
| 		break;
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int __init futex_init(void)
 | |
| {
 | |
| 	unsigned long hashsize, i;
 | |
| 	unsigned int order, n;
 | |
| 	unsigned long size;
 | |
| 
 | |
| #ifdef CONFIG_BASE_SMALL
 | |
| 	hashsize = 16;
 | |
| #else
 | |
| 	hashsize = 256 * num_possible_cpus();
 | |
| 	hashsize /= num_possible_nodes();
 | |
| 	hashsize = max(4, hashsize);
 | |
| 	hashsize = roundup_pow_of_two(hashsize);
 | |
| #endif
 | |
| 	futex_hashshift = ilog2(hashsize);
 | |
| 	size = sizeof(struct futex_hash_bucket) * hashsize;
 | |
| 	order = get_order(size);
 | |
| 
 | |
| 	for_each_node(n) {
 | |
| 		struct futex_hash_bucket *table;
 | |
| 
 | |
| 		if (order > MAX_PAGE_ORDER)
 | |
| 			table = vmalloc_huge_node(size, GFP_KERNEL, n);
 | |
| 		else
 | |
| 			table = alloc_pages_exact_nid(n, size, GFP_KERNEL);
 | |
| 
 | |
| 		BUG_ON(!table);
 | |
| 
 | |
| 		for (i = 0; i < hashsize; i++)
 | |
| 			futex_hash_bucket_init(&table[i], NULL);
 | |
| 
 | |
| 		futex_queues[n] = table;
 | |
| 	}
 | |
| 
 | |
| 	futex_hashmask = hashsize - 1;
 | |
| 	pr_info("futex hash table entries: %lu (%lu bytes on %d NUMA nodes, total %lu KiB, %s).\n",
 | |
| 		hashsize, size, num_possible_nodes(), size * num_possible_nodes() / 1024,
 | |
| 		order > MAX_PAGE_ORDER ? "vmalloc" : "linear");
 | |
| 	return 0;
 | |
| }
 | |
| core_initcall(futex_init);
 |