mirror of
				https://github.com/torvalds/linux.git
				synced 2025-11-04 10:40:15 +02:00 
			
		
		
		
	The MDIO_WT_DONE() macro tests bit 31, which is always 0 (== done) as
readw_poll_timeout_atomic() does a 16-bit read. Replace with the readl
variant.
[kwilczynski: commit log]
Fixes: ca5dcc7631 ("PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()")
Link: https://lore.kernel.org/linux-pci/20240217133722.14391-1-wahrenst@gmx.net
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Krzysztof WilczyĆski <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
		
	
			
		
			
				
	
	
		
			1704 lines
		
	
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1704 lines
		
	
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0+
 | 
						|
/* Copyright (C) 2009 - 2019 Broadcom */
 | 
						|
 | 
						|
#include <linux/bitfield.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/compiler.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/iopoll.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/irqchip/chained_irq.h>
 | 
						|
#include <linux/irqdomain.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/list.h>
 | 
						|
#include <linux/log2.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/msi.h>
 | 
						|
#include <linux/of_address.h>
 | 
						|
#include <linux/of_irq.h>
 | 
						|
#include <linux/of_pci.h>
 | 
						|
#include <linux/of_platform.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/pci-ecam.h>
 | 
						|
#include <linux/printk.h>
 | 
						|
#include <linux/regulator/consumer.h>
 | 
						|
#include <linux/reset.h>
 | 
						|
#include <linux/sizes.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/string.h>
 | 
						|
#include <linux/types.h>
 | 
						|
 | 
						|
#include "../pci.h"
 | 
						|
 | 
						|
/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
 | 
						|
#define BRCM_PCIE_CAP_REGS				0x00ac
 | 
						|
 | 
						|
/* Broadcom STB PCIe Register Offsets */
 | 
						|
#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1				0x0188
 | 
						|
#define  PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK	0xc
 | 
						|
#define  PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN			0x0
 | 
						|
 | 
						|
#define PCIE_RC_CFG_PRIV1_ID_VAL3			0x043c
 | 
						|
#define  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK	0xffffff
 | 
						|
 | 
						|
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc
 | 
						|
#define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00
 | 
						|
 | 
						|
#define PCIE_RC_CFG_PRIV1_ROOT_CAP			0x4f8
 | 
						|
#define  PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK	0xf8
 | 
						|
 | 
						|
#define PCIE_RC_DL_MDIO_ADDR				0x1100
 | 
						|
#define PCIE_RC_DL_MDIO_WR_DATA				0x1104
 | 
						|
#define PCIE_RC_DL_MDIO_RD_DATA				0x1108
 | 
						|
 | 
						|
#define PCIE_MISC_MISC_CTRL				0x4008
 | 
						|
#define  PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK	0x80
 | 
						|
#define  PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK	0x400
 | 
						|
#define  PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK		0x1000
 | 
						|
#define  PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK	0x2000
 | 
						|
#define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000
 | 
						|
 | 
						|
#define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000
 | 
						|
#define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000
 | 
						|
#define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f
 | 
						|
#define  SCB_SIZE_MASK(x) PCIE_MISC_MISC_CTRL_SCB ## x ## _SIZE_MASK
 | 
						|
 | 
						|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c
 | 
						|
#define PCIE_MEM_WIN0_LO(win)	\
 | 
						|
		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 8)
 | 
						|
 | 
						|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI		0x4010
 | 
						|
#define PCIE_MEM_WIN0_HI(win)	\
 | 
						|
		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8)
 | 
						|
 | 
						|
#define PCIE_MISC_RC_BAR1_CONFIG_LO			0x402c
 | 
						|
#define  PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK		0x1f
 | 
						|
 | 
						|
#define PCIE_MISC_RC_BAR2_CONFIG_LO			0x4034
 | 
						|
#define  PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK		0x1f
 | 
						|
#define PCIE_MISC_RC_BAR2_CONFIG_HI			0x4038
 | 
						|
 | 
						|
#define PCIE_MISC_RC_BAR3_CONFIG_LO			0x403c
 | 
						|
#define  PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK		0x1f
 | 
						|
 | 
						|
#define PCIE_MISC_MSI_BAR_CONFIG_LO			0x4044
 | 
						|
#define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048
 | 
						|
 | 
						|
#define PCIE_MISC_MSI_DATA_CONFIG			0x404c
 | 
						|
#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_32		0xffe06540
 | 
						|
#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_8		0xfff86540
 | 
						|
 | 
						|
#define PCIE_MISC_PCIE_CTRL				0x4064
 | 
						|
#define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1
 | 
						|
#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK		0x4
 | 
						|
 | 
						|
#define PCIE_MISC_PCIE_STATUS				0x4068
 | 
						|
#define  PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK		0x80
 | 
						|
#define  PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK	0x20
 | 
						|
#define  PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK	0x10
 | 
						|
#define  PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK	0x40
 | 
						|
 | 
						|
#define PCIE_MISC_REVISION				0x406c
 | 
						|
#define  BRCM_PCIE_HW_REV_33				0x0303
 | 
						|
#define  BRCM_PCIE_HW_REV_3_20				0x0320
 | 
						|
 | 
						|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
 | 
						|
#define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
 | 
						|
#define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0
 | 
						|
#define PCIE_MEM_WIN0_BASE_LIMIT(win)	\
 | 
						|
		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
 | 
						|
 | 
						|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI			0x4080
 | 
						|
#define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK	0xff
 | 
						|
#define PCIE_MEM_WIN0_BASE_HI(win)	\
 | 
						|
		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
 | 
						|
 | 
						|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI			0x4084
 | 
						|
#define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK	0xff
 | 
						|
#define PCIE_MEM_WIN0_LIMIT_HI(win)	\
 | 
						|
		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
 | 
						|
 | 
						|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG					0x4204
 | 
						|
#define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
 | 
						|
#define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK		0x200000
 | 
						|
#define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
 | 
						|
#define  PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x00800000
 | 
						|
#define  PCIE_CLKREQ_MASK \
 | 
						|
	  (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
 | 
						|
	   PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
 | 
						|
 | 
						|
#define PCIE_INTR2_CPU_BASE		0x4300
 | 
						|
#define PCIE_MSI_INTR2_BASE		0x4500
 | 
						|
/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
 | 
						|
#define  MSI_INT_STATUS			0x0
 | 
						|
#define  MSI_INT_CLR			0x8
 | 
						|
#define  MSI_INT_MASK_SET		0x10
 | 
						|
#define  MSI_INT_MASK_CLR		0x14
 | 
						|
 | 
						|
#define PCIE_EXT_CFG_DATA				0x8000
 | 
						|
#define PCIE_EXT_CFG_INDEX				0x9000
 | 
						|
 | 
						|
#define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
 | 
						|
#define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
 | 
						|
 | 
						|
#define RGR1_SW_INIT_1_INIT_GENERIC_MASK		0x2
 | 
						|
#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT		0x1
 | 
						|
#define RGR1_SW_INIT_1_INIT_7278_MASK			0x1
 | 
						|
#define RGR1_SW_INIT_1_INIT_7278_SHIFT			0x0
 | 
						|
 | 
						|
/* PCIe parameters */
 | 
						|
#define BRCM_NUM_PCIE_OUT_WINS		0x4
 | 
						|
#define BRCM_INT_PCI_MSI_NR		32
 | 
						|
#define BRCM_INT_PCI_MSI_LEGACY_NR	8
 | 
						|
#define BRCM_INT_PCI_MSI_SHIFT		0
 | 
						|
#define BRCM_INT_PCI_MSI_MASK		GENMASK(BRCM_INT_PCI_MSI_NR - 1, 0)
 | 
						|
#define BRCM_INT_PCI_MSI_LEGACY_MASK	GENMASK(31, \
 | 
						|
						32 - BRCM_INT_PCI_MSI_LEGACY_NR)
 | 
						|
 | 
						|
/* MSI target addresses */
 | 
						|
#define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
 | 
						|
#define BRCM_MSI_TARGET_ADDR_GT_4GB	0xffffffffcULL
 | 
						|
 | 
						|
/* MDIO registers */
 | 
						|
#define MDIO_PORT0			0x0
 | 
						|
#define MDIO_DATA_MASK			0x7fffffff
 | 
						|
#define MDIO_PORT_MASK			0xf0000
 | 
						|
#define MDIO_REGAD_MASK			0xffff
 | 
						|
#define MDIO_CMD_MASK			0xfff00000
 | 
						|
#define MDIO_CMD_READ			0x1
 | 
						|
#define MDIO_CMD_WRITE			0x0
 | 
						|
#define MDIO_DATA_DONE_MASK		0x80000000
 | 
						|
#define MDIO_RD_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
 | 
						|
#define MDIO_WT_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
 | 
						|
#define SSC_REGS_ADDR			0x1100
 | 
						|
#define SET_ADDR_OFFSET			0x1f
 | 
						|
#define SSC_CNTL_OFFSET			0x2
 | 
						|
#define SSC_CNTL_OVRD_EN_MASK		0x8000
 | 
						|
#define SSC_CNTL_OVRD_VAL_MASK		0x4000
 | 
						|
#define SSC_STATUS_OFFSET		0x1
 | 
						|
#define SSC_STATUS_SSC_MASK		0x400
 | 
						|
#define SSC_STATUS_PLL_LOCK_MASK	0x800
 | 
						|
#define PCIE_BRCM_MAX_MEMC		3
 | 
						|
 | 
						|
#define IDX_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_INDEX])
 | 
						|
#define DATA_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_DATA])
 | 
						|
#define PCIE_RGR1_SW_INIT_1(pcie)	(pcie->reg_offsets[RGR1_SW_INIT_1])
 | 
						|
 | 
						|
/* Rescal registers */
 | 
						|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS			0x3
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK		0x4
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT	0x2
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK		0x2
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT		0x1
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK		0x1
 | 
						|
#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT		0x0
 | 
						|
 | 
						|
/* Forward declarations */
 | 
						|
struct brcm_pcie;
 | 
						|
 | 
						|
enum {
 | 
						|
	RGR1_SW_INIT_1,
 | 
						|
	EXT_CFG_INDEX,
 | 
						|
	EXT_CFG_DATA,
 | 
						|
};
 | 
						|
 | 
						|
enum {
 | 
						|
	RGR1_SW_INIT_1_INIT_MASK,
 | 
						|
	RGR1_SW_INIT_1_INIT_SHIFT,
 | 
						|
};
 | 
						|
 | 
						|
enum pcie_type {
 | 
						|
	GENERIC,
 | 
						|
	BCM7425,
 | 
						|
	BCM7435,
 | 
						|
	BCM4908,
 | 
						|
	BCM7278,
 | 
						|
	BCM2711,
 | 
						|
};
 | 
						|
 | 
						|
struct pcie_cfg_data {
 | 
						|
	const int *offsets;
 | 
						|
	const enum pcie_type type;
 | 
						|
	void (*perst_set)(struct brcm_pcie *pcie, u32 val);
 | 
						|
	void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
 | 
						|
};
 | 
						|
 | 
						|
struct subdev_regulators {
 | 
						|
	unsigned int num_supplies;
 | 
						|
	struct regulator_bulk_data supplies[];
 | 
						|
};
 | 
						|
 | 
						|
struct brcm_msi {
 | 
						|
	struct device		*dev;
 | 
						|
	void __iomem		*base;
 | 
						|
	struct device_node	*np;
 | 
						|
	struct irq_domain	*msi_domain;
 | 
						|
	struct irq_domain	*inner_domain;
 | 
						|
	struct mutex		lock; /* guards the alloc/free operations */
 | 
						|
	u64			target_addr;
 | 
						|
	int			irq;
 | 
						|
	DECLARE_BITMAP(used, BRCM_INT_PCI_MSI_NR);
 | 
						|
	bool			legacy;
 | 
						|
	/* Some chips have MSIs in bits [31..24] of a shared register. */
 | 
						|
	int			legacy_shift;
 | 
						|
	int			nr; /* No. of MSI available, depends on chip */
 | 
						|
	/* This is the base pointer for interrupt status/set/clr regs */
 | 
						|
	void __iomem		*intr_base;
 | 
						|
};
 | 
						|
 | 
						|
/* Internal PCIe Host Controller Information.*/
 | 
						|
struct brcm_pcie {
 | 
						|
	struct device		*dev;
 | 
						|
	void __iomem		*base;
 | 
						|
	struct clk		*clk;
 | 
						|
	struct device_node	*np;
 | 
						|
	bool			ssc;
 | 
						|
	int			gen;
 | 
						|
	u64			msi_target_addr;
 | 
						|
	struct brcm_msi		*msi;
 | 
						|
	const int		*reg_offsets;
 | 
						|
	enum pcie_type		type;
 | 
						|
	struct reset_control	*rescal;
 | 
						|
	struct reset_control	*perst_reset;
 | 
						|
	int			num_memc;
 | 
						|
	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 | 
						|
	u32			hw_rev;
 | 
						|
	void			(*perst_set)(struct brcm_pcie *pcie, u32 val);
 | 
						|
	void			(*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
 | 
						|
	struct subdev_regulators *sr;
 | 
						|
	bool			ep_wakeup_capable;
 | 
						|
};
 | 
						|
 | 
						|
static inline bool is_bmips(const struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	return pcie->type == BCM7435 || pcie->type == BCM7425;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * This is to convert the size of the inbound "BAR" region to the
 | 
						|
 * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
 | 
						|
 */
 | 
						|
static int brcm_pcie_encode_ibar_size(u64 size)
 | 
						|
{
 | 
						|
	int log2_in = ilog2(size);
 | 
						|
 | 
						|
	if (log2_in >= 12 && log2_in <= 15)
 | 
						|
		/* Covers 4KB to 32KB (inclusive) */
 | 
						|
		return (log2_in - 12) + 0x1c;
 | 
						|
	else if (log2_in >= 16 && log2_in <= 35)
 | 
						|
		/* Covers 64KB to 32GB, (inclusive) */
 | 
						|
		return log2_in - 15;
 | 
						|
	/* Something is awry so disable */
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd)
 | 
						|
{
 | 
						|
	u32 pkt = 0;
 | 
						|
 | 
						|
	pkt |= FIELD_PREP(MDIO_PORT_MASK, port);
 | 
						|
	pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad);
 | 
						|
	pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd);
 | 
						|
 | 
						|
	return pkt;
 | 
						|
}
 | 
						|
 | 
						|
/* negative return value indicates error */
 | 
						|
static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val)
 | 
						|
{
 | 
						|
	u32 data;
 | 
						|
	int err;
 | 
						|
 | 
						|
	writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ),
 | 
						|
		   base + PCIE_RC_DL_MDIO_ADDR);
 | 
						|
	readl(base + PCIE_RC_DL_MDIO_ADDR);
 | 
						|
	err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_RD_DATA, data,
 | 
						|
					MDIO_RD_DONE(data), 10, 100);
 | 
						|
	*val = FIELD_GET(MDIO_DATA_MASK, data);
 | 
						|
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
/* negative return value indicates error */
 | 
						|
static int brcm_pcie_mdio_write(void __iomem *base, u8 port,
 | 
						|
				u8 regad, u16 wrdata)
 | 
						|
{
 | 
						|
	u32 data;
 | 
						|
	int err;
 | 
						|
 | 
						|
	writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
 | 
						|
		   base + PCIE_RC_DL_MDIO_ADDR);
 | 
						|
	readl(base + PCIE_RC_DL_MDIO_ADDR);
 | 
						|
	writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
 | 
						|
 | 
						|
	err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_WR_DATA, data,
 | 
						|
					MDIO_WT_DONE(data), 10, 100);
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Configures device for Spread Spectrum Clocking (SSC) mode; a negative
 | 
						|
 * return value indicates error.
 | 
						|
 */
 | 
						|
static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	int pll, ssc;
 | 
						|
	int ret;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET,
 | 
						|
				   SSC_REGS_ADDR);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
 | 
						|
				  SSC_CNTL_OFFSET, &tmp);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK);
 | 
						|
	u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK);
 | 
						|
	ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0,
 | 
						|
				   SSC_CNTL_OFFSET, tmp);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	usleep_range(1000, 2000);
 | 
						|
	ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
 | 
						|
				  SSC_STATUS_OFFSET, &tmp);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp);
 | 
						|
	pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp);
 | 
						|
 | 
						|
	return ssc && pll ? 0 : -EIO;
 | 
						|
}
 | 
						|
 | 
						|
/* Limits operation to a specific generation (1, 2, or 3) */
 | 
						|
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
 | 
						|
{
 | 
						|
	u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
 | 
						|
	u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
 | 
						|
 | 
						|
	lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
 | 
						|
	writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
 | 
						|
 | 
						|
	lnkctl2 = (lnkctl2 & ~0xf) | gen;
 | 
						|
	writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
 | 
						|
				       unsigned int win, u64 cpu_addr,
 | 
						|
				       u64 pcie_addr, u64 size)
 | 
						|
{
 | 
						|
	u32 cpu_addr_mb_high, limit_addr_mb_high;
 | 
						|
	phys_addr_t cpu_addr_mb, limit_addr_mb;
 | 
						|
	int high_addr_shift;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	/* Set the base of the pcie_addr window */
 | 
						|
	writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win));
 | 
						|
	writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win));
 | 
						|
 | 
						|
	/* Write the addr base & limit lower bits (in MBs) */
 | 
						|
	cpu_addr_mb = cpu_addr / SZ_1M;
 | 
						|
	limit_addr_mb = (cpu_addr + size - 1) / SZ_1M;
 | 
						|
 | 
						|
	tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
 | 
						|
	u32p_replace_bits(&tmp, cpu_addr_mb,
 | 
						|
			  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
 | 
						|
	u32p_replace_bits(&tmp, limit_addr_mb,
 | 
						|
			  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
 | 
						|
	writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
 | 
						|
 | 
						|
	if (is_bmips(pcie))
 | 
						|
		return;
 | 
						|
 | 
						|
	/* Write the cpu & limit addr upper bits */
 | 
						|
	high_addr_shift =
 | 
						|
		HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
 | 
						|
 | 
						|
	cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift;
 | 
						|
	tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
 | 
						|
	u32p_replace_bits(&tmp, cpu_addr_mb_high,
 | 
						|
			  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK);
 | 
						|
	writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
 | 
						|
 | 
						|
	limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
 | 
						|
	tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
 | 
						|
	u32p_replace_bits(&tmp, limit_addr_mb_high,
 | 
						|
			  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
 | 
						|
	writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
 | 
						|
}
 | 
						|
 | 
						|
static struct irq_chip brcm_msi_irq_chip = {
 | 
						|
	.name            = "BRCM STB PCIe MSI",
 | 
						|
	.irq_ack         = irq_chip_ack_parent,
 | 
						|
	.irq_mask        = pci_msi_mask_irq,
 | 
						|
	.irq_unmask      = pci_msi_unmask_irq,
 | 
						|
};
 | 
						|
 | 
						|
static struct msi_domain_info brcm_msi_domain_info = {
 | 
						|
	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
 | 
						|
		   MSI_FLAG_MULTI_PCI_MSI),
 | 
						|
	.chip	= &brcm_msi_irq_chip,
 | 
						|
};
 | 
						|
 | 
						|
static void brcm_pcie_msi_isr(struct irq_desc *desc)
 | 
						|
{
 | 
						|
	struct irq_chip *chip = irq_desc_get_chip(desc);
 | 
						|
	unsigned long status;
 | 
						|
	struct brcm_msi *msi;
 | 
						|
	struct device *dev;
 | 
						|
	u32 bit;
 | 
						|
 | 
						|
	chained_irq_enter(chip, desc);
 | 
						|
	msi = irq_desc_get_handler_data(desc);
 | 
						|
	dev = msi->dev;
 | 
						|
 | 
						|
	status = readl(msi->intr_base + MSI_INT_STATUS);
 | 
						|
	status >>= msi->legacy_shift;
 | 
						|
 | 
						|
	for_each_set_bit(bit, &status, msi->nr) {
 | 
						|
		int ret;
 | 
						|
		ret = generic_handle_domain_irq(msi->inner_domain, bit);
 | 
						|
		if (ret)
 | 
						|
			dev_dbg(dev, "unexpected MSI\n");
 | 
						|
	}
 | 
						|
 | 
						|
	chained_irq_exit(chip, desc);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 | 
						|
{
 | 
						|
	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
 | 
						|
 | 
						|
	msg->address_lo = lower_32_bits(msi->target_addr);
 | 
						|
	msg->address_hi = upper_32_bits(msi->target_addr);
 | 
						|
	msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq;
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_msi_set_affinity(struct irq_data *irq_data,
 | 
						|
				 const struct cpumask *mask, bool force)
 | 
						|
{
 | 
						|
	return -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_msi_ack_irq(struct irq_data *data)
 | 
						|
{
 | 
						|
	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
 | 
						|
	const int shift_amt = data->hwirq + msi->legacy_shift;
 | 
						|
 | 
						|
	writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static struct irq_chip brcm_msi_bottom_irq_chip = {
 | 
						|
	.name			= "BRCM STB MSI",
 | 
						|
	.irq_compose_msi_msg	= brcm_msi_compose_msi_msg,
 | 
						|
	.irq_set_affinity	= brcm_msi_set_affinity,
 | 
						|
	.irq_ack                = brcm_msi_ack_irq,
 | 
						|
};
 | 
						|
 | 
						|
static int brcm_msi_alloc(struct brcm_msi *msi, unsigned int nr_irqs)
 | 
						|
{
 | 
						|
	int hwirq;
 | 
						|
 | 
						|
	mutex_lock(&msi->lock);
 | 
						|
	hwirq = bitmap_find_free_region(msi->used, msi->nr,
 | 
						|
					order_base_2(nr_irqs));
 | 
						|
	mutex_unlock(&msi->lock);
 | 
						|
 | 
						|
	return hwirq;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq,
 | 
						|
			  unsigned int nr_irqs)
 | 
						|
{
 | 
						|
	mutex_lock(&msi->lock);
 | 
						|
	bitmap_release_region(msi->used, hwirq, order_base_2(nr_irqs));
 | 
						|
	mutex_unlock(&msi->lock);
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 | 
						|
				 unsigned int nr_irqs, void *args)
 | 
						|
{
 | 
						|
	struct brcm_msi *msi = domain->host_data;
 | 
						|
	int hwirq, i;
 | 
						|
 | 
						|
	hwirq = brcm_msi_alloc(msi, nr_irqs);
 | 
						|
 | 
						|
	if (hwirq < 0)
 | 
						|
		return hwirq;
 | 
						|
 | 
						|
	for (i = 0; i < nr_irqs; i++)
 | 
						|
		irq_domain_set_info(domain, virq + i, hwirq + i,
 | 
						|
				    &brcm_msi_bottom_irq_chip, domain->host_data,
 | 
						|
				    handle_edge_irq, NULL, NULL);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_irq_domain_free(struct irq_domain *domain,
 | 
						|
				 unsigned int virq, unsigned int nr_irqs)
 | 
						|
{
 | 
						|
	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
 | 
						|
	struct brcm_msi *msi = irq_data_get_irq_chip_data(d);
 | 
						|
 | 
						|
	brcm_msi_free(msi, d->hwirq, nr_irqs);
 | 
						|
}
 | 
						|
 | 
						|
static const struct irq_domain_ops msi_domain_ops = {
 | 
						|
	.alloc	= brcm_irq_domain_alloc,
 | 
						|
	.free	= brcm_irq_domain_free,
 | 
						|
};
 | 
						|
 | 
						|
static int brcm_allocate_domains(struct brcm_msi *msi)
 | 
						|
{
 | 
						|
	struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
 | 
						|
	struct device *dev = msi->dev;
 | 
						|
 | 
						|
	msi->inner_domain = irq_domain_add_linear(NULL, msi->nr, &msi_domain_ops, msi);
 | 
						|
	if (!msi->inner_domain) {
 | 
						|
		dev_err(dev, "failed to create IRQ domain\n");
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
 | 
						|
						    &brcm_msi_domain_info,
 | 
						|
						    msi->inner_domain);
 | 
						|
	if (!msi->msi_domain) {
 | 
						|
		dev_err(dev, "failed to create MSI domain\n");
 | 
						|
		irq_domain_remove(msi->inner_domain);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_free_domains(struct brcm_msi *msi)
 | 
						|
{
 | 
						|
	irq_domain_remove(msi->msi_domain);
 | 
						|
	irq_domain_remove(msi->inner_domain);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_msi_remove(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	struct brcm_msi *msi = pcie->msi;
 | 
						|
 | 
						|
	if (!msi)
 | 
						|
		return;
 | 
						|
	irq_set_chained_handler_and_data(msi->irq, NULL, NULL);
 | 
						|
	brcm_free_domains(msi);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_msi_set_regs(struct brcm_msi *msi)
 | 
						|
{
 | 
						|
	u32 val = msi->legacy ? BRCM_INT_PCI_MSI_LEGACY_MASK :
 | 
						|
				BRCM_INT_PCI_MSI_MASK;
 | 
						|
 | 
						|
	writel(val, msi->intr_base + MSI_INT_MASK_CLR);
 | 
						|
	writel(val, msi->intr_base + MSI_INT_CLR);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
 | 
						|
	 * enable, which we set to 1.
 | 
						|
	 */
 | 
						|
	writel(lower_32_bits(msi->target_addr) | 0x1,
 | 
						|
	       msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO);
 | 
						|
	writel(upper_32_bits(msi->target_addr),
 | 
						|
	       msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
 | 
						|
 | 
						|
	val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 : PCIE_MISC_MSI_DATA_CONFIG_VAL_32;
 | 
						|
	writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	struct brcm_msi *msi;
 | 
						|
	int irq, ret;
 | 
						|
	struct device *dev = pcie->dev;
 | 
						|
 | 
						|
	irq = irq_of_parse_and_map(dev->of_node, 1);
 | 
						|
	if (irq <= 0) {
 | 
						|
		dev_err(dev, "cannot map MSI interrupt\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL);
 | 
						|
	if (!msi)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	mutex_init(&msi->lock);
 | 
						|
	msi->dev = dev;
 | 
						|
	msi->base = pcie->base;
 | 
						|
	msi->np = pcie->np;
 | 
						|
	msi->target_addr = pcie->msi_target_addr;
 | 
						|
	msi->irq = irq;
 | 
						|
	msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Sanity check to make sure that the 'used' bitmap in struct brcm_msi
 | 
						|
	 * is large enough.
 | 
						|
	 */
 | 
						|
	BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
 | 
						|
 | 
						|
	if (msi->legacy) {
 | 
						|
		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
 | 
						|
		msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
 | 
						|
		msi->legacy_shift = 24;
 | 
						|
	} else {
 | 
						|
		msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
 | 
						|
		msi->nr = BRCM_INT_PCI_MSI_NR;
 | 
						|
		msi->legacy_shift = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = brcm_allocate_domains(msi);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi);
 | 
						|
 | 
						|
	brcm_msi_set_regs(msi);
 | 
						|
	pcie->msi = msi;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* The controller is capable of serving in both RC and EP roles */
 | 
						|
static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	u32 val = readl(base + PCIE_MISC_PCIE_STATUS);
 | 
						|
 | 
						|
	return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val);
 | 
						|
}
 | 
						|
 | 
						|
static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
 | 
						|
	u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val);
 | 
						|
	u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val);
 | 
						|
 | 
						|
	return dla && plu;
 | 
						|
}
 | 
						|
 | 
						|
static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
 | 
						|
				       unsigned int devfn, int where)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = bus->sysdata;
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	int idx;
 | 
						|
 | 
						|
	/* Accesses to the RC go right to the RC registers if !devfn */
 | 
						|
	if (pci_is_root_bus(bus))
 | 
						|
		return devfn ? NULL : base + PCIE_ECAM_REG(where);
 | 
						|
 | 
						|
	/* An access to our HW w/o link-up will cause a CPU Abort */
 | 
						|
	if (!brcm_pcie_link_up(pcie))
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	/* For devices, write to the config space index register */
 | 
						|
	idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
 | 
						|
	writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
 | 
						|
	return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
 | 
						|
}
 | 
						|
 | 
						|
static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
 | 
						|
					   unsigned int devfn, int where)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = bus->sysdata;
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	int idx;
 | 
						|
 | 
						|
	/* Accesses to the RC go right to the RC registers if !devfn */
 | 
						|
	if (pci_is_root_bus(bus))
 | 
						|
		return devfn ? NULL : base + PCIE_ECAM_REG(where);
 | 
						|
 | 
						|
	/* An access to our HW w/o link-up will cause a CPU Abort */
 | 
						|
	if (!brcm_pcie_link_up(pcie))
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	/* For devices, write to the config space index register */
 | 
						|
	idx = PCIE_ECAM_OFFSET(bus->number, devfn, where);
 | 
						|
	writel(idx, base + IDX_ADDR(pcie));
 | 
						|
	return base + DATA_ADDR(pcie);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
 | 
						|
{
 | 
						|
	u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
 | 
						|
	u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
 | 
						|
 | 
						|
	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
	tmp = (tmp & ~mask) | ((val << shift) & mask);
 | 
						|
	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
 | 
						|
{
 | 
						|
	u32 tmp, mask =  RGR1_SW_INIT_1_INIT_7278_MASK;
 | 
						|
	u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT;
 | 
						|
 | 
						|
	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
	tmp = (tmp & ~mask) | ((val << shift) & mask);
 | 
						|
	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
 | 
						|
{
 | 
						|
	if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
 | 
						|
		return;
 | 
						|
 | 
						|
	if (val)
 | 
						|
		reset_control_assert(pcie->perst_reset);
 | 
						|
	else
 | 
						|
		reset_control_deassert(pcie->perst_reset);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
 | 
						|
{
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	/* Perst bit has moved and assert value is 0 */
 | 
						|
	tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
 | 
						|
	u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
 | 
						|
	writel(tmp, pcie->base +  PCIE_MISC_PCIE_CTRL);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val)
 | 
						|
{
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
 | 
						|
	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
 | 
						|
							u64 *rc_bar2_size,
 | 
						|
							u64 *rc_bar2_offset)
 | 
						|
{
 | 
						|
	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 | 
						|
	struct resource_entry *entry;
 | 
						|
	struct device *dev = pcie->dev;
 | 
						|
	u64 lowest_pcie_addr = ~(u64)0;
 | 
						|
	int ret, i = 0;
 | 
						|
	u64 size = 0;
 | 
						|
 | 
						|
	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
 | 
						|
		u64 pcie_beg = entry->res->start - entry->offset;
 | 
						|
 | 
						|
		size += entry->res->end - entry->res->start + 1;
 | 
						|
		if (pcie_beg < lowest_pcie_addr)
 | 
						|
			lowest_pcie_addr = pcie_beg;
 | 
						|
	}
 | 
						|
 | 
						|
	if (lowest_pcie_addr == ~(u64)0) {
 | 
						|
		dev_err(dev, "DT node has no dma-ranges\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
 | 
						|
						  PCIE_BRCM_MAX_MEMC);
 | 
						|
 | 
						|
	if (ret <= 0) {
 | 
						|
		/* Make an educated guess */
 | 
						|
		pcie->num_memc = 1;
 | 
						|
		pcie->memc_size[0] = 1ULL << fls64(size - 1);
 | 
						|
	} else {
 | 
						|
		pcie->num_memc = ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Each memc is viewed through a "port" that is a power of 2 */
 | 
						|
	for (i = 0, size = 0; i < pcie->num_memc; i++)
 | 
						|
		size += pcie->memc_size[i];
 | 
						|
 | 
						|
	/* System memory starts at this address in PCIe-space */
 | 
						|
	*rc_bar2_offset = lowest_pcie_addr;
 | 
						|
	/* The sum of all memc views must also be a power of 2 */
 | 
						|
	*rc_bar2_size = 1ULL << fls64(size - 1);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * We validate the inbound memory view even though we should trust
 | 
						|
	 * whatever the device-tree provides. This is because of an HW issue on
 | 
						|
	 * early Raspberry Pi 4's revisions (bcm2711). It turns out its
 | 
						|
	 * firmware has to dynamically edit dma-ranges due to a bug on the
 | 
						|
	 * PCIe controller integration, which prohibits any access above the
 | 
						|
	 * lower 3GB of memory. Given this, we decided to keep the dma-ranges
 | 
						|
	 * in check, avoiding hard to debug device-tree related issues in the
 | 
						|
	 * future:
 | 
						|
	 *
 | 
						|
	 * The PCIe host controller by design must set the inbound viewport to
 | 
						|
	 * be a contiguous arrangement of all of the system's memory.  In
 | 
						|
	 * addition, its size mut be a power of two.  To further complicate
 | 
						|
	 * matters, the viewport must start on a pcie-address that is aligned
 | 
						|
	 * on a multiple of its size.  If a portion of the viewport does not
 | 
						|
	 * represent system memory -- e.g. 3GB of memory requires a 4GB
 | 
						|
	 * viewport -- we can map the outbound memory in or after 3GB and even
 | 
						|
	 * though the viewport will overlap the outbound memory the controller
 | 
						|
	 * will know to send outbound memory downstream and everything else
 | 
						|
	 * upstream.
 | 
						|
	 *
 | 
						|
	 * For example:
 | 
						|
	 *
 | 
						|
	 * - The best-case scenario, memory up to 3GB, is to place the inbound
 | 
						|
	 *   region in the first 4GB of pcie-space, as some legacy devices can
 | 
						|
	 *   only address 32bits. We would also like to put the MSI under 4GB
 | 
						|
	 *   as well, since some devices require a 32bit MSI target address.
 | 
						|
	 *
 | 
						|
	 * - If the system memory is 4GB or larger we cannot start the inbound
 | 
						|
	 *   region at location 0 (since we have to allow some space for
 | 
						|
	 *   outbound memory @ 3GB). So instead it will  start at the 1x
 | 
						|
	 *   multiple of its size
 | 
						|
	 */
 | 
						|
	if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
 | 
						|
	    (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
 | 
						|
		dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
 | 
						|
			*rc_bar2_size, *rc_bar2_offset);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_setup(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	u64 rc_bar2_offset, rc_bar2_size;
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	struct pci_host_bridge *bridge;
 | 
						|
	struct resource_entry *entry;
 | 
						|
	u32 tmp, burst, aspm_support;
 | 
						|
	int num_out_wins = 0;
 | 
						|
	int ret, memc;
 | 
						|
 | 
						|
	/* Reset the bridge */
 | 
						|
	pcie->bridge_sw_init_set(pcie, 1);
 | 
						|
 | 
						|
	/* Ensure that PERST# is asserted; some bootloaders may deassert it. */
 | 
						|
	if (pcie->type == BCM2711)
 | 
						|
		pcie->perst_set(pcie, 1);
 | 
						|
 | 
						|
	usleep_range(100, 200);
 | 
						|
 | 
						|
	/* Take the bridge out of reset */
 | 
						|
	pcie->bridge_sw_init_set(pcie, 0);
 | 
						|
 | 
						|
	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
	if (is_bmips(pcie))
 | 
						|
		tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
 | 
						|
	else
 | 
						|
		tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
 | 
						|
	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
	/* Wait for SerDes to be stable */
 | 
						|
	usleep_range(100, 200);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * SCB_MAX_BURST_SIZE is a two bit field.  For GENERIC chips it
 | 
						|
	 * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it
 | 
						|
	 * is encoded as 0=Rsvd, 1=128, 2=256, 3=512.
 | 
						|
	 */
 | 
						|
	if (is_bmips(pcie))
 | 
						|
		burst = 0x1; /* 256 bytes */
 | 
						|
	else if (pcie->type == BCM2711)
 | 
						|
		burst = 0x0; /* 128 bytes */
 | 
						|
	else if (pcie->type == BCM7278)
 | 
						|
		burst = 0x3; /* 512 bytes */
 | 
						|
	else
 | 
						|
		burst = 0x2; /* 512 bytes */
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN,
 | 
						|
	 * RCB_MPS_MODE, RCB_64B_MODE
 | 
						|
	 */
 | 
						|
	tmp = readl(base + PCIE_MISC_MISC_CTRL);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
 | 
						|
	u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 | 
						|
 | 
						|
	ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
 | 
						|
						    &rc_bar2_offset);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	tmp = lower_32_bits(rc_bar2_offset);
 | 
						|
	u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
 | 
						|
			  PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
 | 
						|
	writel(upper_32_bits(rc_bar2_offset),
 | 
						|
	       base + PCIE_MISC_RC_BAR2_CONFIG_HI);
 | 
						|
 | 
						|
	tmp = readl(base + PCIE_MISC_MISC_CTRL);
 | 
						|
	for (memc = 0; memc < pcie->num_memc; memc++) {
 | 
						|
		u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15;
 | 
						|
 | 
						|
		if (memc == 0)
 | 
						|
			u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(0));
 | 
						|
		else if (memc == 1)
 | 
						|
			u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(1));
 | 
						|
		else if (memc == 2)
 | 
						|
			u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(2));
 | 
						|
	}
 | 
						|
	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * We ideally want the MSI target address to be located in the 32bit
 | 
						|
	 * addressable memory area. Some devices might depend on it. This is
 | 
						|
	 * possible either when the inbound window is located above the lower
 | 
						|
	 * 4GB or when the inbound area is smaller than 4GB (taking into
 | 
						|
	 * account the rounding-up we're forced to perform).
 | 
						|
	 */
 | 
						|
	if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) < SZ_4G)
 | 
						|
		pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB;
 | 
						|
	else
 | 
						|
		pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB;
 | 
						|
 | 
						|
	if (!brcm_pcie_rc_mode(pcie)) {
 | 
						|
		dev_err(pcie->dev, "PCIe RC controller misconfigured as Endpoint\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* disable the PCIe->GISB memory window (RC_BAR1) */
 | 
						|
	tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO);
 | 
						|
	tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK;
 | 
						|
	writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO);
 | 
						|
 | 
						|
	/* disable the PCIe->SCB memory window (RC_BAR3) */
 | 
						|
	tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO);
 | 
						|
	tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
 | 
						|
	writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
 | 
						|
 | 
						|
	/* Don't advertise L0s capability if 'aspm-no-l0s' */
 | 
						|
	aspm_support = PCIE_LINK_STATE_L1;
 | 
						|
	if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
 | 
						|
		aspm_support |= PCIE_LINK_STATE_L0S;
 | 
						|
	tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
 | 
						|
	u32p_replace_bits(&tmp, aspm_support,
 | 
						|
		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
 | 
						|
	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * For config space accesses on the RC, show the right class for
 | 
						|
	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
 | 
						|
	 */
 | 
						|
	tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
 | 
						|
	u32p_replace_bits(&tmp, 0x060400,
 | 
						|
			  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
 | 
						|
	writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
 | 
						|
 | 
						|
	bridge = pci_host_bridge_from_priv(pcie);
 | 
						|
	resource_list_for_each_entry(entry, &bridge->windows) {
 | 
						|
		struct resource *res = entry->res;
 | 
						|
 | 
						|
		if (resource_type(res) != IORESOURCE_MEM)
 | 
						|
			continue;
 | 
						|
 | 
						|
		if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
 | 
						|
			dev_err(pcie->dev, "too many outbound wins\n");
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (is_bmips(pcie)) {
 | 
						|
			u64 start = res->start;
 | 
						|
			unsigned int j, nwins = resource_size(res) / SZ_128M;
 | 
						|
 | 
						|
			/* bmips PCIe outbound windows have a 128MB max size */
 | 
						|
			if (nwins > BRCM_NUM_PCIE_OUT_WINS)
 | 
						|
				nwins = BRCM_NUM_PCIE_OUT_WINS;
 | 
						|
			for (j = 0; j < nwins; j++, start += SZ_128M)
 | 
						|
				brcm_pcie_set_outbound_win(pcie, j, start,
 | 
						|
							   start - entry->offset,
 | 
						|
							   SZ_128M);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start,
 | 
						|
					   res->start - entry->offset,
 | 
						|
					   resource_size(res));
 | 
						|
		num_out_wins++;
 | 
						|
	}
 | 
						|
 | 
						|
	/* PCIe->SCB endian mode for BAR */
 | 
						|
	tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
 | 
						|
	u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN,
 | 
						|
		PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK);
 | 
						|
	writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * This extends the timeout period for an access to an internal bus.  This
 | 
						|
 * access timeout may occur during L1SS sleep periods, even without the
 | 
						|
 * presence of a PCIe access.
 | 
						|
 */
 | 
						|
static void brcm_extend_rbus_timeout(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	/* TIMEOUT register is two registers before RGR1_SW_INIT_1 */
 | 
						|
	const unsigned int REG_OFFSET = PCIE_RGR1_SW_INIT_1(pcie) - 8;
 | 
						|
	u32 timeout_us = 4000000; /* 4 seconds, our setting for L1SS */
 | 
						|
 | 
						|
	/* Each unit in timeout register is 1/216,000,000 seconds */
 | 
						|
	writel(216 * timeout_us, pcie->base + REG_OFFSET);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_config_clkreq(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	static const char err_msg[] = "invalid 'brcm,clkreq-mode' DT string\n";
 | 
						|
	const char *mode = "default";
 | 
						|
	u32 clkreq_cntl;
 | 
						|
	int ret, tmp;
 | 
						|
 | 
						|
	ret = of_property_read_string(pcie->np, "brcm,clkreq-mode", &mode);
 | 
						|
	if (ret && ret != -EINVAL) {
 | 
						|
		dev_err(pcie->dev, err_msg);
 | 
						|
		mode = "safe";
 | 
						|
	}
 | 
						|
 | 
						|
	/* Start out assuming safe mode (both mode bits cleared) */
 | 
						|
	clkreq_cntl = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
	clkreq_cntl &= ~PCIE_CLKREQ_MASK;
 | 
						|
 | 
						|
	if (strcmp(mode, "no-l1ss") == 0) {
 | 
						|
		/*
 | 
						|
		 * "no-l1ss" -- Provides Clock Power Management, L0s, and
 | 
						|
		 * L1, but cannot provide L1 substate (L1SS) power
 | 
						|
		 * savings. If the downstream device connected to the RC is
 | 
						|
		 * L1SS capable AND the OS enables L1SS, all PCIe traffic
 | 
						|
		 * may abruptly halt, potentially hanging the system.
 | 
						|
		 */
 | 
						|
		clkreq_cntl |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
 | 
						|
		/*
 | 
						|
		 * We want to un-advertise L1 substates because if the OS
 | 
						|
		 * tries to configure the controller into using L1 substate
 | 
						|
		 * power savings it may fail or hang when the RC HW is in
 | 
						|
		 * "no-l1ss" mode.
 | 
						|
		 */
 | 
						|
		tmp = readl(pcie->base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
 | 
						|
		u32p_replace_bits(&tmp, 2, PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK);
 | 
						|
		writel(tmp, pcie->base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
 | 
						|
 | 
						|
	} else if (strcmp(mode, "default") == 0) {
 | 
						|
		/*
 | 
						|
		 * "default" -- Provides L0s, L1, and L1SS, but not
 | 
						|
		 * compliant to provide Clock Power Management;
 | 
						|
		 * specifically, may not be able to meet the Tclron max
 | 
						|
		 * timing of 400ns as specified in "Dynamic Clock Control",
 | 
						|
		 * section 3.2.5.2.2 of the PCIe spec.  This situation is
 | 
						|
		 * atypical and should happen only with older devices.
 | 
						|
		 */
 | 
						|
		clkreq_cntl |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK;
 | 
						|
		brcm_extend_rbus_timeout(pcie);
 | 
						|
 | 
						|
	} else {
 | 
						|
		/*
 | 
						|
		 * "safe" -- No power savings; refclk is driven by RC
 | 
						|
		 * unconditionally.
 | 
						|
		 */
 | 
						|
		if (strcmp(mode, "safe") != 0)
 | 
						|
			dev_err(pcie->dev, err_msg);
 | 
						|
		mode = "safe";
 | 
						|
	}
 | 
						|
	writel(clkreq_cntl, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
 | 
						|
	dev_info(pcie->dev, "clkreq-mode set to %s\n", mode);
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	struct device *dev = pcie->dev;
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	u16 nlw, cls, lnksta;
 | 
						|
	bool ssc_good = false;
 | 
						|
	int ret, i;
 | 
						|
 | 
						|
	/* Unassert the fundamental reset */
 | 
						|
	pcie->perst_set(pcie, 0);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Wait for 100ms after PERST# deassertion; see PCIe CEM specification
 | 
						|
	 * sections 2.2, PCIe r5.0, 6.6.1.
 | 
						|
	 */
 | 
						|
	msleep(100);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Give the RC/EP even more time to wake up, before trying to
 | 
						|
	 * configure RC.  Intermittently check status for link-up, up to a
 | 
						|
	 * total of 100ms.
 | 
						|
	 */
 | 
						|
	for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
 | 
						|
		msleep(5);
 | 
						|
 | 
						|
	if (!brcm_pcie_link_up(pcie)) {
 | 
						|
		dev_err(dev, "link down\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	brcm_config_clkreq(pcie);
 | 
						|
 | 
						|
	if (pcie->gen)
 | 
						|
		brcm_pcie_set_gen(pcie, pcie->gen);
 | 
						|
 | 
						|
	if (pcie->ssc) {
 | 
						|
		ret = brcm_pcie_set_ssc(pcie);
 | 
						|
		if (ret == 0)
 | 
						|
			ssc_good = true;
 | 
						|
		else
 | 
						|
			dev_err(dev, "failed attempt to enter ssc mode\n");
 | 
						|
	}
 | 
						|
 | 
						|
	lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
 | 
						|
	cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta);
 | 
						|
	nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
 | 
						|
	dev_info(dev, "link up, %s x%u %s\n",
 | 
						|
		 pci_speed_string(pcie_link_speed[cls]), nlw,
 | 
						|
		 ssc_good ? "(SSC)" : "(!SSC)");
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const char * const supplies[] = {
 | 
						|
	"vpcie3v3",
 | 
						|
	"vpcie3v3aux",
 | 
						|
	"vpcie12v",
 | 
						|
};
 | 
						|
 | 
						|
static void *alloc_subdev_regulators(struct device *dev)
 | 
						|
{
 | 
						|
	const size_t size = sizeof(struct subdev_regulators) +
 | 
						|
		sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
 | 
						|
	struct subdev_regulators *sr;
 | 
						|
	int i;
 | 
						|
 | 
						|
	sr = devm_kzalloc(dev, size, GFP_KERNEL);
 | 
						|
	if (sr) {
 | 
						|
		sr->num_supplies = ARRAY_SIZE(supplies);
 | 
						|
		for (i = 0; i < ARRAY_SIZE(supplies); i++)
 | 
						|
			sr->supplies[i].supply = supplies[i];
 | 
						|
	}
 | 
						|
 | 
						|
	return sr;
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_add_bus(struct pci_bus *bus)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = bus->sysdata;
 | 
						|
	struct device *dev = &bus->dev;
 | 
						|
	struct subdev_regulators *sr;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!bus->parent || !pci_is_root_bus(bus->parent))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (dev->of_node) {
 | 
						|
		sr = alloc_subdev_regulators(dev);
 | 
						|
		if (!sr) {
 | 
						|
			dev_info(dev, "Can't allocate regulators for downstream device\n");
 | 
						|
			goto no_regulators;
 | 
						|
		}
 | 
						|
 | 
						|
		pcie->sr = sr;
 | 
						|
 | 
						|
		ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
 | 
						|
		if (ret) {
 | 
						|
			dev_info(dev, "No regulators for downstream device\n");
 | 
						|
			goto no_regulators;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
 | 
						|
		if (ret) {
 | 
						|
			dev_err(dev, "Can't enable regulators for downstream device\n");
 | 
						|
			regulator_bulk_free(sr->num_supplies, sr->supplies);
 | 
						|
			pcie->sr = NULL;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
no_regulators:
 | 
						|
	brcm_pcie_start_link(pcie);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_remove_bus(struct pci_bus *bus)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = bus->sysdata;
 | 
						|
	struct subdev_regulators *sr = pcie->sr;
 | 
						|
	struct device *dev = &bus->dev;
 | 
						|
 | 
						|
	if (!sr)
 | 
						|
		return;
 | 
						|
 | 
						|
	if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
 | 
						|
		dev_err(dev, "Failed to disable regulators for downstream device\n");
 | 
						|
	regulator_bulk_free(sr->num_supplies, sr->supplies);
 | 
						|
	pcie->sr = NULL;
 | 
						|
}
 | 
						|
 | 
						|
/* L23 is a low-power PCIe link state */
 | 
						|
static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	int l23, i;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	/* Assert request for L23 */
 | 
						|
	tmp = readl(base + PCIE_MISC_PCIE_CTRL);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_PCIE_CTRL);
 | 
						|
 | 
						|
	/* Wait up to 36 msec for L23 */
 | 
						|
	tmp = readl(base + PCIE_MISC_PCIE_STATUS);
 | 
						|
	l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp);
 | 
						|
	for (i = 0; i < 15 && !l23; i++) {
 | 
						|
		usleep_range(2000, 2400);
 | 
						|
		tmp = readl(base + PCIE_MISC_PCIE_STATUS);
 | 
						|
		l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK,
 | 
						|
				tmp);
 | 
						|
	}
 | 
						|
 | 
						|
	if (!l23)
 | 
						|
		dev_err(pcie->dev, "failed to enter low-power link state\n");
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
 | 
						|
{
 | 
						|
	static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT,
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT,
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,};
 | 
						|
	static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK,
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK,
 | 
						|
		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,};
 | 
						|
	const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1;
 | 
						|
	const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1;
 | 
						|
	u32 tmp, combined_mask = 0;
 | 
						|
	u32 val;
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	int i, ret;
 | 
						|
 | 
						|
	for (i = beg; i != end; start ? i++ : i--) {
 | 
						|
		val = start ? BIT_MASK(shifts[i]) : 0;
 | 
						|
		tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
 | 
						|
		tmp = (tmp & ~masks[i]) | (val & masks[i]);
 | 
						|
		writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
 | 
						|
		usleep_range(50, 200);
 | 
						|
		combined_mask |= masks[i];
 | 
						|
	}
 | 
						|
 | 
						|
	tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
 | 
						|
	val = start ? combined_mask : 0;
 | 
						|
 | 
						|
	ret = (tmp & combined_mask) == val ? 0 : -EIO;
 | 
						|
	if (ret)
 | 
						|
		dev_err(pcie->dev, "failed to %s phy\n", (start ? "start" : "stop"));
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static inline int brcm_phy_start(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
 | 
						|
}
 | 
						|
 | 
						|
static inline int brcm_phy_stop(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	void __iomem *base = pcie->base;
 | 
						|
	int tmp;
 | 
						|
 | 
						|
	if (brcm_pcie_link_up(pcie))
 | 
						|
		brcm_pcie_enter_l23(pcie);
 | 
						|
	/* Assert fundamental reset */
 | 
						|
	pcie->perst_set(pcie, 1);
 | 
						|
 | 
						|
	/* Deassert request for L23 in case it was asserted */
 | 
						|
	tmp = readl(base + PCIE_MISC_PCIE_CTRL);
 | 
						|
	u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_PCIE_CTRL);
 | 
						|
 | 
						|
	/* Turn off SerDes */
 | 
						|
	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
	u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
 | 
						|
	/* Shutdown PCIe bridge */
 | 
						|
	pcie->bridge_sw_init_set(pcie, 1);
 | 
						|
}
 | 
						|
 | 
						|
static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
 | 
						|
{
 | 
						|
	bool *ret = data;
 | 
						|
 | 
						|
	if (device_may_wakeup(&dev->dev)) {
 | 
						|
		*ret = true;
 | 
						|
		dev_info(&dev->dev, "Possible wake-up device; regulators will not be disabled\n");
 | 
						|
	}
 | 
						|
	return (int) *ret;
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_suspend_noirq(struct device *dev)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = dev_get_drvdata(dev);
 | 
						|
	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	brcm_pcie_turn_off(pcie);
 | 
						|
	/*
 | 
						|
	 * If brcm_phy_stop() returns an error, just dev_err(). If we
 | 
						|
	 * return the error it will cause the suspend to fail and this is a
 | 
						|
	 * forgivable offense that will probably be erased on resume.
 | 
						|
	 */
 | 
						|
	if (brcm_phy_stop(pcie))
 | 
						|
		dev_err(dev, "Could not stop phy for suspend\n");
 | 
						|
 | 
						|
	ret = reset_control_rearm(pcie->rescal);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "Could not rearm rescal reset\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	if (pcie->sr) {
 | 
						|
		/*
 | 
						|
		 * Now turn off the regulators, but if at least one
 | 
						|
		 * downstream device is enabled as a wake-up source, do not
 | 
						|
		 * turn off regulators.
 | 
						|
		 */
 | 
						|
		pcie->ep_wakeup_capable = false;
 | 
						|
		pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
 | 
						|
			     &pcie->ep_wakeup_capable);
 | 
						|
		if (!pcie->ep_wakeup_capable) {
 | 
						|
			ret = regulator_bulk_disable(pcie->sr->num_supplies,
 | 
						|
						     pcie->sr->supplies);
 | 
						|
			if (ret) {
 | 
						|
				dev_err(dev, "Could not turn off regulators\n");
 | 
						|
				reset_control_reset(pcie->rescal);
 | 
						|
				return ret;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
	clk_disable_unprepare(pcie->clk);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int brcm_pcie_resume_noirq(struct device *dev)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = dev_get_drvdata(dev);
 | 
						|
	void __iomem *base;
 | 
						|
	u32 tmp;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	base = pcie->base;
 | 
						|
	ret = clk_prepare_enable(pcie->clk);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = reset_control_reset(pcie->rescal);
 | 
						|
	if (ret)
 | 
						|
		goto err_disable_clk;
 | 
						|
 | 
						|
	ret = brcm_phy_start(pcie);
 | 
						|
	if (ret)
 | 
						|
		goto err_reset;
 | 
						|
 | 
						|
	/* Take bridge out of reset so we can access the SERDES reg */
 | 
						|
	pcie->bridge_sw_init_set(pcie, 0);
 | 
						|
 | 
						|
	/* SERDES_IDDQ = 0 */
 | 
						|
	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
	u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
 | 
						|
	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
 | 
						|
 | 
						|
	/* wait for serdes to be stable */
 | 
						|
	udelay(100);
 | 
						|
 | 
						|
	ret = brcm_pcie_setup(pcie);
 | 
						|
	if (ret)
 | 
						|
		goto err_reset;
 | 
						|
 | 
						|
	if (pcie->sr) {
 | 
						|
		if (pcie->ep_wakeup_capable) {
 | 
						|
			/*
 | 
						|
			 * We are resuming from a suspend.  In the suspend we
 | 
						|
			 * did not disable the power supplies, so there is
 | 
						|
			 * no need to enable them (and falsely increase their
 | 
						|
			 * usage count).
 | 
						|
			 */
 | 
						|
			pcie->ep_wakeup_capable = false;
 | 
						|
		} else {
 | 
						|
			ret = regulator_bulk_enable(pcie->sr->num_supplies,
 | 
						|
						    pcie->sr->supplies);
 | 
						|
			if (ret) {
 | 
						|
				dev_err(dev, "Could not turn on regulators\n");
 | 
						|
				goto err_reset;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = brcm_pcie_start_link(pcie);
 | 
						|
	if (ret)
 | 
						|
		goto err_regulator;
 | 
						|
 | 
						|
	if (pcie->msi)
 | 
						|
		brcm_msi_set_regs(pcie->msi);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_regulator:
 | 
						|
	if (pcie->sr)
 | 
						|
		regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
 | 
						|
err_reset:
 | 
						|
	reset_control_rearm(pcie->rescal);
 | 
						|
err_disable_clk:
 | 
						|
	clk_disable_unprepare(pcie->clk);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 | 
						|
{
 | 
						|
	brcm_msi_remove(pcie);
 | 
						|
	brcm_pcie_turn_off(pcie);
 | 
						|
	if (brcm_phy_stop(pcie))
 | 
						|
		dev_err(pcie->dev, "Could not stop phy\n");
 | 
						|
	if (reset_control_rearm(pcie->rescal))
 | 
						|
		dev_err(pcie->dev, "Could not rearm rescal reset\n");
 | 
						|
	clk_disable_unprepare(pcie->clk);
 | 
						|
}
 | 
						|
 | 
						|
static void brcm_pcie_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct brcm_pcie *pcie = platform_get_drvdata(pdev);
 | 
						|
	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 | 
						|
 | 
						|
	pci_stop_root_bus(bridge->bus);
 | 
						|
	pci_remove_root_bus(bridge->bus);
 | 
						|
	__brcm_pcie_remove(pcie);
 | 
						|
}
 | 
						|
 | 
						|
static const int pcie_offsets[] = {
 | 
						|
	[RGR1_SW_INIT_1] = 0x9210,
 | 
						|
	[EXT_CFG_INDEX]  = 0x9000,
 | 
						|
	[EXT_CFG_DATA]   = 0x9004,
 | 
						|
};
 | 
						|
 | 
						|
static const int pcie_offsets_bmips_7425[] = {
 | 
						|
	[RGR1_SW_INIT_1] = 0x8010,
 | 
						|
	[EXT_CFG_INDEX]  = 0x8300,
 | 
						|
	[EXT_CFG_DATA]   = 0x8304,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data generic_cfg = {
 | 
						|
	.offsets	= pcie_offsets,
 | 
						|
	.type		= GENERIC,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_generic,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data bcm7425_cfg = {
 | 
						|
	.offsets	= pcie_offsets_bmips_7425,
 | 
						|
	.type		= BCM7425,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_generic,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data bcm7435_cfg = {
 | 
						|
	.offsets	= pcie_offsets,
 | 
						|
	.type		= BCM7435,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_generic,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data bcm4908_cfg = {
 | 
						|
	.offsets	= pcie_offsets,
 | 
						|
	.type		= BCM4908,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_4908,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 | 
						|
};
 | 
						|
 | 
						|
static const int pcie_offset_bcm7278[] = {
 | 
						|
	[RGR1_SW_INIT_1] = 0xc010,
 | 
						|
	[EXT_CFG_INDEX] = 0x9000,
 | 
						|
	[EXT_CFG_DATA] = 0x9004,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data bcm7278_cfg = {
 | 
						|
	.offsets	= pcie_offset_bcm7278,
 | 
						|
	.type		= BCM7278,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_7278,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
 | 
						|
};
 | 
						|
 | 
						|
static const struct pcie_cfg_data bcm2711_cfg = {
 | 
						|
	.offsets	= pcie_offsets,
 | 
						|
	.type		= BCM2711,
 | 
						|
	.perst_set	= brcm_pcie_perst_set_generic,
 | 
						|
	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 | 
						|
};
 | 
						|
 | 
						|
static const struct of_device_id brcm_pcie_match[] = {
 | 
						|
	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
 | 
						|
	{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
 | 
						|
	{ .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
 | 
						|
	{},
 | 
						|
};
 | 
						|
 | 
						|
static struct pci_ops brcm_pcie_ops = {
 | 
						|
	.map_bus = brcm_pcie_map_bus,
 | 
						|
	.read = pci_generic_config_read,
 | 
						|
	.write = pci_generic_config_write,
 | 
						|
	.add_bus = brcm_pcie_add_bus,
 | 
						|
	.remove_bus = brcm_pcie_remove_bus,
 | 
						|
};
 | 
						|
 | 
						|
static struct pci_ops brcm7425_pcie_ops = {
 | 
						|
	.map_bus = brcm7425_pcie_map_bus,
 | 
						|
	.read = pci_generic_config_read32,
 | 
						|
	.write = pci_generic_config_write32,
 | 
						|
	.add_bus = brcm_pcie_add_bus,
 | 
						|
	.remove_bus = brcm_pcie_remove_bus,
 | 
						|
};
 | 
						|
 | 
						|
static int brcm_pcie_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct device_node *np = pdev->dev.of_node, *msi_np;
 | 
						|
	struct pci_host_bridge *bridge;
 | 
						|
	const struct pcie_cfg_data *data;
 | 
						|
	struct brcm_pcie *pcie;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
 | 
						|
	if (!bridge)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	data = of_device_get_match_data(&pdev->dev);
 | 
						|
	if (!data) {
 | 
						|
		pr_err("failed to look up compatible string\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	pcie = pci_host_bridge_priv(bridge);
 | 
						|
	pcie->dev = &pdev->dev;
 | 
						|
	pcie->np = np;
 | 
						|
	pcie->reg_offsets = data->offsets;
 | 
						|
	pcie->type = data->type;
 | 
						|
	pcie->perst_set = data->perst_set;
 | 
						|
	pcie->bridge_sw_init_set = data->bridge_sw_init_set;
 | 
						|
 | 
						|
	pcie->base = devm_platform_ioremap_resource(pdev, 0);
 | 
						|
	if (IS_ERR(pcie->base))
 | 
						|
		return PTR_ERR(pcie->base);
 | 
						|
 | 
						|
	pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie");
 | 
						|
	if (IS_ERR(pcie->clk))
 | 
						|
		return PTR_ERR(pcie->clk);
 | 
						|
 | 
						|
	ret = of_pci_get_max_link_speed(np);
 | 
						|
	pcie->gen = (ret < 0) ? 0 : ret;
 | 
						|
 | 
						|
	pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
 | 
						|
 | 
						|
	ret = clk_prepare_enable(pcie->clk);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "could not enable clock\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
	pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
 | 
						|
	if (IS_ERR(pcie->rescal)) {
 | 
						|
		clk_disable_unprepare(pcie->clk);
 | 
						|
		return PTR_ERR(pcie->rescal);
 | 
						|
	}
 | 
						|
	pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
 | 
						|
	if (IS_ERR(pcie->perst_reset)) {
 | 
						|
		clk_disable_unprepare(pcie->clk);
 | 
						|
		return PTR_ERR(pcie->perst_reset);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = reset_control_reset(pcie->rescal);
 | 
						|
	if (ret)
 | 
						|
		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
 | 
						|
 | 
						|
	ret = brcm_phy_start(pcie);
 | 
						|
	if (ret) {
 | 
						|
		reset_control_rearm(pcie->rescal);
 | 
						|
		clk_disable_unprepare(pcie->clk);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = brcm_pcie_setup(pcie);
 | 
						|
	if (ret)
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
 | 
						|
	if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
 | 
						|
		dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto fail;
 | 
						|
	}
 | 
						|
 | 
						|
	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
 | 
						|
	if (pci_msi_enabled() && msi_np == pcie->np) {
 | 
						|
		ret = brcm_pcie_enable_msi(pcie);
 | 
						|
		if (ret) {
 | 
						|
			dev_err(pcie->dev, "probe of internal MSI failed");
 | 
						|
			goto fail;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
 | 
						|
	bridge->sysdata = pcie;
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, pcie);
 | 
						|
 | 
						|
	ret = pci_host_probe(bridge);
 | 
						|
	if (!ret && !brcm_pcie_link_up(pcie))
 | 
						|
		ret = -ENODEV;
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		brcm_pcie_remove(pdev);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
fail:
 | 
						|
	__brcm_pcie_remove(pcie);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 | 
						|
 | 
						|
static const struct dev_pm_ops brcm_pcie_pm_ops = {
 | 
						|
	.suspend_noirq = brcm_pcie_suspend_noirq,
 | 
						|
	.resume_noirq = brcm_pcie_resume_noirq,
 | 
						|
};
 | 
						|
 | 
						|
static struct platform_driver brcm_pcie_driver = {
 | 
						|
	.probe = brcm_pcie_probe,
 | 
						|
	.remove_new = brcm_pcie_remove,
 | 
						|
	.driver = {
 | 
						|
		.name = "brcm-pcie",
 | 
						|
		.of_match_table = brcm_pcie_match,
 | 
						|
		.pm = &brcm_pcie_pm_ops,
 | 
						|
	},
 | 
						|
};
 | 
						|
module_platform_driver(brcm_pcie_driver);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
 | 
						|
MODULE_AUTHOR("Broadcom");
 |