mirror of
				https://github.com/torvalds/linux.git
				synced 2025-11-04 10:40:15 +02:00 
			
		
		
		
	Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
		
			
				
	
	
		
			1340 lines
		
	
	
	
		
			38 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1340 lines
		
	
	
	
		
			38 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
 | 
						|
 *
 | 
						|
 * Copyright (c) 2008-2009 USI Co., Ltd.
 | 
						|
 * All rights reserved.
 | 
						|
 *
 | 
						|
 * Redistribution and use in source and binary forms, with or without
 | 
						|
 * modification, are permitted provided that the following conditions
 | 
						|
 * are met:
 | 
						|
 * 1. Redistributions of source code must retain the above copyright
 | 
						|
 *    notice, this list of conditions, and the following disclaimer,
 | 
						|
 *    without modification.
 | 
						|
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 | 
						|
 *    substantially similar to the "NO WARRANTY" disclaimer below
 | 
						|
 *    ("Disclaimer") and any redistribution must be conditioned upon
 | 
						|
 *    including a substantially similar Disclaimer requirement for further
 | 
						|
 *    binary redistribution.
 | 
						|
 * 3. Neither the names of the above-listed copyright holders nor the names
 | 
						|
 *    of any contributors may be used to endorse or promote products derived
 | 
						|
 *    from this software without specific prior written permission.
 | 
						|
 *
 | 
						|
 * Alternatively, this software may be distributed under the terms of the
 | 
						|
 * GNU General Public License ("GPL") version 2 as published by the Free
 | 
						|
 * Software Foundation.
 | 
						|
 *
 | 
						|
 * NO WARRANTY
 | 
						|
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 | 
						|
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 | 
						|
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 | 
						|
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 | 
						|
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 | 
						|
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 | 
						|
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 | 
						|
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 | 
						|
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 | 
						|
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 | 
						|
 * POSSIBILITY OF SUCH DAMAGES.
 | 
						|
 *
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/slab.h>
 | 
						|
#include "pm8001_sas.h"
 | 
						|
 | 
						|
/**
 | 
						|
 * pm8001_find_tag - from sas task to find out  tag that belongs to this task
 | 
						|
 * @task: the task sent to the LLDD
 | 
						|
 * @tag: the found tag associated with the task
 | 
						|
 */
 | 
						|
static int pm8001_find_tag(struct sas_task *task, u32 *tag)
 | 
						|
{
 | 
						|
	if (task->lldd_task) {
 | 
						|
		struct pm8001_ccb_info *ccb;
 | 
						|
		ccb = task->lldd_task;
 | 
						|
		*tag = ccb->ccb_tag;
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_tag_free - free the no more needed tag
 | 
						|
  * @pm8001_ha: our hba struct
 | 
						|
  * @tag: the found tag associated with the task
 | 
						|
  */
 | 
						|
void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
 | 
						|
{
 | 
						|
	void *bitmap = pm8001_ha->tags;
 | 
						|
	clear_bit(tag, bitmap);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_tag_alloc - allocate a empty tag for task used.
 | 
						|
  * @pm8001_ha: our hba struct
 | 
						|
  * @tag_out: the found empty tag .
 | 
						|
  */
 | 
						|
inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
 | 
						|
{
 | 
						|
	unsigned int tag;
 | 
						|
	void *bitmap = pm8001_ha->tags;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
 | 
						|
	tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
 | 
						|
	if (tag >= pm8001_ha->tags_num) {
 | 
						|
		spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
 | 
						|
		return -SAS_QUEUE_FULL;
 | 
						|
	}
 | 
						|
	set_bit(tag, bitmap);
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
 | 
						|
	*tag_out = tag;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	for (i = 0; i < pm8001_ha->tags_num; ++i)
 | 
						|
		pm8001_tag_free(pm8001_ha, i);
 | 
						|
}
 | 
						|
 | 
						|
 /**
 | 
						|
  * pm8001_mem_alloc - allocate memory for pm8001.
 | 
						|
  * @pdev: pci device.
 | 
						|
  * @virt_addr: the allocated virtual address
 | 
						|
  * @pphys_addr_hi: the physical address high byte address.
 | 
						|
  * @pphys_addr_lo: the physical address low byte address.
 | 
						|
  * @mem_size: memory size.
 | 
						|
  */
 | 
						|
int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
 | 
						|
	dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
 | 
						|
	u32 *pphys_addr_lo, u32 mem_size, u32 align)
 | 
						|
{
 | 
						|
	caddr_t mem_virt_alloc;
 | 
						|
	dma_addr_t mem_dma_handle;
 | 
						|
	u64 phys_align;
 | 
						|
	u64 align_offset = 0;
 | 
						|
	if (align)
 | 
						|
		align_offset = (dma_addr_t)align - 1;
 | 
						|
	mem_virt_alloc = dma_zalloc_coherent(&pdev->dev, mem_size + align,
 | 
						|
			&mem_dma_handle, GFP_KERNEL);
 | 
						|
	if (!mem_virt_alloc) {
 | 
						|
		pm8001_printk("memory allocation error\n");
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
	*pphys_addr = mem_dma_handle;
 | 
						|
	phys_align = (*pphys_addr + align_offset) & ~align_offset;
 | 
						|
	*virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
 | 
						|
	*pphys_addr_hi = upper_32_bits(phys_align);
 | 
						|
	*pphys_addr_lo = lower_32_bits(phys_align);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
/**
 | 
						|
  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
 | 
						|
  * find out our hba struct.
 | 
						|
  * @dev: the domain device which from sas layer.
 | 
						|
  */
 | 
						|
static
 | 
						|
struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
 | 
						|
{
 | 
						|
	struct sas_ha_struct *sha = dev->port->ha;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 | 
						|
	return pm8001_ha;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_phy_control - this function should be registered to
 | 
						|
  * sas_domain_function_template to provide libsas used, note: this is just
 | 
						|
  * control the HBA phy rather than other expander phy if you want control
 | 
						|
  * other phy, you should use SMP command.
 | 
						|
  * @sas_phy: which phy in HBA phys.
 | 
						|
  * @func: the operation.
 | 
						|
  * @funcdata: always NULL.
 | 
						|
  */
 | 
						|
int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
 | 
						|
	void *funcdata)
 | 
						|
{
 | 
						|
	int rc = 0, phy_id = sas_phy->id;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = NULL;
 | 
						|
	struct sas_phy_linkrates *rates;
 | 
						|
	struct sas_ha_struct *sas_ha;
 | 
						|
	struct pm8001_phy *phy;
 | 
						|
	DECLARE_COMPLETION_ONSTACK(completion);
 | 
						|
	unsigned long flags;
 | 
						|
	pm8001_ha = sas_phy->ha->lldd_ha;
 | 
						|
	phy = &pm8001_ha->phy[phy_id];
 | 
						|
	pm8001_ha->phy[phy_id].enable_completion = &completion;
 | 
						|
	switch (func) {
 | 
						|
	case PHY_FUNC_SET_LINK_RATE:
 | 
						|
		rates = funcdata;
 | 
						|
		if (rates->minimum_linkrate) {
 | 
						|
			pm8001_ha->phy[phy_id].minimum_linkrate =
 | 
						|
				rates->minimum_linkrate;
 | 
						|
		}
 | 
						|
		if (rates->maximum_linkrate) {
 | 
						|
			pm8001_ha->phy[phy_id].maximum_linkrate =
 | 
						|
				rates->maximum_linkrate;
 | 
						|
		}
 | 
						|
		if (pm8001_ha->phy[phy_id].phy_state ==  PHY_LINK_DISABLE) {
 | 
						|
			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 | 
						|
			wait_for_completion(&completion);
 | 
						|
		}
 | 
						|
		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 | 
						|
					      PHY_LINK_RESET);
 | 
						|
		break;
 | 
						|
	case PHY_FUNC_HARD_RESET:
 | 
						|
		if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
 | 
						|
			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 | 
						|
			wait_for_completion(&completion);
 | 
						|
		}
 | 
						|
		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 | 
						|
					      PHY_HARD_RESET);
 | 
						|
		break;
 | 
						|
	case PHY_FUNC_LINK_RESET:
 | 
						|
		if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
 | 
						|
			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 | 
						|
			wait_for_completion(&completion);
 | 
						|
		}
 | 
						|
		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 | 
						|
					      PHY_LINK_RESET);
 | 
						|
		break;
 | 
						|
	case PHY_FUNC_RELEASE_SPINUP_HOLD:
 | 
						|
		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 | 
						|
					      PHY_LINK_RESET);
 | 
						|
		break;
 | 
						|
	case PHY_FUNC_DISABLE:
 | 
						|
		if (pm8001_ha->chip_id != chip_8001) {
 | 
						|
			if (pm8001_ha->phy[phy_id].phy_state ==
 | 
						|
				PHY_STATE_LINK_UP_SPCV) {
 | 
						|
				sas_ha = pm8001_ha->sas;
 | 
						|
				sas_phy_disconnected(&phy->sas_phy);
 | 
						|
				sas_ha->notify_phy_event(&phy->sas_phy,
 | 
						|
					PHYE_LOSS_OF_SIGNAL);
 | 
						|
				phy->phy_attached = 0;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			if (pm8001_ha->phy[phy_id].phy_state ==
 | 
						|
				PHY_STATE_LINK_UP_SPC) {
 | 
						|
				sas_ha = pm8001_ha->sas;
 | 
						|
				sas_phy_disconnected(&phy->sas_phy);
 | 
						|
				sas_ha->notify_phy_event(&phy->sas_phy,
 | 
						|
					PHYE_LOSS_OF_SIGNAL);
 | 
						|
				phy->phy_attached = 0;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
 | 
						|
		break;
 | 
						|
	case PHY_FUNC_GET_EVENTS:
 | 
						|
		spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
		if (pm8001_ha->chip_id == chip_8001) {
 | 
						|
			if (-1 == pm8001_bar4_shift(pm8001_ha,
 | 
						|
					(phy_id < 4) ? 0x30000 : 0x40000)) {
 | 
						|
				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
				return -EINVAL;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		{
 | 
						|
			struct sas_phy *phy = sas_phy->phy;
 | 
						|
			uint32_t *qp = (uint32_t *)(((char *)
 | 
						|
				pm8001_ha->io_mem[2].memvirtaddr)
 | 
						|
				+ 0x1034 + (0x4000 * (phy_id & 3)));
 | 
						|
 | 
						|
			phy->invalid_dword_count = qp[0];
 | 
						|
			phy->running_disparity_error_count = qp[1];
 | 
						|
			phy->loss_of_dword_sync_count = qp[3];
 | 
						|
			phy->phy_reset_problem_count = qp[4];
 | 
						|
		}
 | 
						|
		if (pm8001_ha->chip_id == chip_8001)
 | 
						|
			pm8001_bar4_shift(pm8001_ha, 0);
 | 
						|
		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
		return 0;
 | 
						|
	default:
 | 
						|
		rc = -EOPNOTSUPP;
 | 
						|
	}
 | 
						|
	msleep(300);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
 | 
						|
  * command to HBA.
 | 
						|
  * @shost: the scsi host data.
 | 
						|
  */
 | 
						|
void pm8001_scan_start(struct Scsi_Host *shost)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 | 
						|
	pm8001_ha = sha->lldd_ha;
 | 
						|
	/* SAS_RE_INITIALIZATION not available in SPCv/ve */
 | 
						|
	if (pm8001_ha->chip_id == chip_8001)
 | 
						|
		PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
 | 
						|
	for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
 | 
						|
		PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
 | 
						|
}
 | 
						|
 | 
						|
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
 | 
						|
{
 | 
						|
	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
 | 
						|
 | 
						|
	/* give the phy enabling interrupt event time to come in (1s
 | 
						|
	* is empirically about all it takes) */
 | 
						|
	if (time < HZ)
 | 
						|
		return 0;
 | 
						|
	/* Wait for discovery to finish */
 | 
						|
	sas_drain_work(ha);
 | 
						|
	return 1;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  * @ccb: the ccb which attached to smp task
 | 
						|
  */
 | 
						|
static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct pm8001_ccb_info *ccb)
 | 
						|
{
 | 
						|
	return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
 | 
						|
}
 | 
						|
 | 
						|
u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
 | 
						|
{
 | 
						|
	struct ata_queued_cmd *qc = task->uldd_task;
 | 
						|
	if (qc) {
 | 
						|
		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
 | 
						|
		    qc->tf.command == ATA_CMD_FPDMA_READ ||
 | 
						|
		    qc->tf.command == ATA_CMD_FPDMA_RECV ||
 | 
						|
		    qc->tf.command == ATA_CMD_FPDMA_SEND ||
 | 
						|
		    qc->tf.command == ATA_CMD_NCQ_NON_DATA) {
 | 
						|
			*tag = qc->tag;
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  * @ccb: the ccb which attached to sata task
 | 
						|
  */
 | 
						|
static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct pm8001_ccb_info *ccb)
 | 
						|
{
 | 
						|
	return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  * @ccb: the ccb which attached to TM
 | 
						|
  * @tmf: the task management IU
 | 
						|
  */
 | 
						|
static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
 | 
						|
{
 | 
						|
	return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  * @ccb: the ccb which attached to ssp task
 | 
						|
  */
 | 
						|
static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct pm8001_ccb_info *ccb)
 | 
						|
{
 | 
						|
	return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
 | 
						|
}
 | 
						|
 | 
						|
 /* Find the local port id that's attached to this device */
 | 
						|
static int sas_find_local_port_id(struct domain_device *dev)
 | 
						|
{
 | 
						|
	struct domain_device *pdev = dev->parent;
 | 
						|
 | 
						|
	/* Directly attached device */
 | 
						|
	if (!pdev)
 | 
						|
		return dev->port->id;
 | 
						|
	while (pdev) {
 | 
						|
		struct domain_device *pdev_p = pdev->parent;
 | 
						|
		if (!pdev_p)
 | 
						|
			return pdev->port->id;
 | 
						|
		pdev = pdev->parent;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
 | 
						|
  * @task: the task to be execute.
 | 
						|
  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 | 
						|
  * we always execute one one time.
 | 
						|
  * @gfp_flags: gfp_flags.
 | 
						|
  * @is_tmf: if it is task management task.
 | 
						|
  * @tmf: the task management IU
 | 
						|
  */
 | 
						|
#define DEV_IS_GONE(pm8001_dev)	\
 | 
						|
	((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
 | 
						|
static int pm8001_task_exec(struct sas_task *task,
 | 
						|
	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 | 
						|
{
 | 
						|
	struct domain_device *dev = task->dev;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct pm8001_device *pm8001_dev;
 | 
						|
	struct pm8001_port *port = NULL;
 | 
						|
	struct sas_task *t = task;
 | 
						|
	struct pm8001_ccb_info *ccb;
 | 
						|
	u32 tag = 0xdeadbeef, rc, n_elem = 0;
 | 
						|
	unsigned long flags = 0;
 | 
						|
 | 
						|
	if (!dev->port) {
 | 
						|
		struct task_status_struct *tsm = &t->task_status;
 | 
						|
		tsm->resp = SAS_TASK_UNDELIVERED;
 | 
						|
		tsm->stat = SAS_PHY_DOWN;
 | 
						|
		if (dev->dev_type != SAS_SATA_DEV)
 | 
						|
			t->task_done(t);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(task->dev);
 | 
						|
	if (pm8001_ha->controller_fatal_error) {
 | 
						|
		struct task_status_struct *ts = &t->task_status;
 | 
						|
 | 
						|
		ts->resp = SAS_TASK_UNDELIVERED;
 | 
						|
		t->task_done(t);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
	PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
 | 
						|
	spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
	do {
 | 
						|
		dev = t->dev;
 | 
						|
		pm8001_dev = dev->lldd_dev;
 | 
						|
		port = &pm8001_ha->port[sas_find_local_port_id(dev)];
 | 
						|
		if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
 | 
						|
			if (sas_protocol_ata(t->task_proto)) {
 | 
						|
				struct task_status_struct *ts = &t->task_status;
 | 
						|
				ts->resp = SAS_TASK_UNDELIVERED;
 | 
						|
				ts->stat = SAS_PHY_DOWN;
 | 
						|
 | 
						|
				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
				t->task_done(t);
 | 
						|
				spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
				continue;
 | 
						|
			} else {
 | 
						|
				struct task_status_struct *ts = &t->task_status;
 | 
						|
				ts->resp = SAS_TASK_UNDELIVERED;
 | 
						|
				ts->stat = SAS_PHY_DOWN;
 | 
						|
				t->task_done(t);
 | 
						|
				continue;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		rc = pm8001_tag_alloc(pm8001_ha, &tag);
 | 
						|
		if (rc)
 | 
						|
			goto err_out;
 | 
						|
		ccb = &pm8001_ha->ccb_info[tag];
 | 
						|
 | 
						|
		if (!sas_protocol_ata(t->task_proto)) {
 | 
						|
			if (t->num_scatter) {
 | 
						|
				n_elem = dma_map_sg(pm8001_ha->dev,
 | 
						|
					t->scatter,
 | 
						|
					t->num_scatter,
 | 
						|
					t->data_dir);
 | 
						|
				if (!n_elem) {
 | 
						|
					rc = -ENOMEM;
 | 
						|
					goto err_out_tag;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			n_elem = t->num_scatter;
 | 
						|
		}
 | 
						|
 | 
						|
		t->lldd_task = ccb;
 | 
						|
		ccb->n_elem = n_elem;
 | 
						|
		ccb->ccb_tag = tag;
 | 
						|
		ccb->task = t;
 | 
						|
		ccb->device = pm8001_dev;
 | 
						|
		switch (t->task_proto) {
 | 
						|
		case SAS_PROTOCOL_SMP:
 | 
						|
			rc = pm8001_task_prep_smp(pm8001_ha, ccb);
 | 
						|
			break;
 | 
						|
		case SAS_PROTOCOL_SSP:
 | 
						|
			if (is_tmf)
 | 
						|
				rc = pm8001_task_prep_ssp_tm(pm8001_ha,
 | 
						|
					ccb, tmf);
 | 
						|
			else
 | 
						|
				rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
 | 
						|
			break;
 | 
						|
		case SAS_PROTOCOL_SATA:
 | 
						|
		case SAS_PROTOCOL_STP:
 | 
						|
			rc = pm8001_task_prep_ata(pm8001_ha, ccb);
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			dev_printk(KERN_ERR, pm8001_ha->dev,
 | 
						|
				"unknown sas_task proto: 0x%x\n",
 | 
						|
				t->task_proto);
 | 
						|
			rc = -EINVAL;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (rc) {
 | 
						|
			PM8001_IO_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("rc is %x\n", rc));
 | 
						|
			goto err_out_tag;
 | 
						|
		}
 | 
						|
		/* TODO: select normal or high priority */
 | 
						|
		spin_lock(&t->task_state_lock);
 | 
						|
		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 | 
						|
		spin_unlock(&t->task_state_lock);
 | 
						|
		pm8001_dev->running_req++;
 | 
						|
	} while (0);
 | 
						|
	rc = 0;
 | 
						|
	goto out_done;
 | 
						|
 | 
						|
err_out_tag:
 | 
						|
	pm8001_tag_free(pm8001_ha, tag);
 | 
						|
err_out:
 | 
						|
	dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
 | 
						|
	if (!sas_protocol_ata(t->task_proto))
 | 
						|
		if (n_elem)
 | 
						|
			dma_unmap_sg(pm8001_ha->dev, t->scatter, t->num_scatter,
 | 
						|
				t->data_dir);
 | 
						|
out_done:
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_queue_command - register for upper layer used, all IO commands sent
 | 
						|
  * to HBA are from this interface.
 | 
						|
  * @task: the task to be execute.
 | 
						|
  * @gfp_flags: gfp_flags
 | 
						|
  */
 | 
						|
int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
 | 
						|
{
 | 
						|
	return pm8001_task_exec(task, gfp_flags, 0, NULL);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  * @ccb: the ccb which attached to ssp task
 | 
						|
  * @task: the task to be free.
 | 
						|
  * @ccb_idx: ccb index.
 | 
						|
  */
 | 
						|
void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
 | 
						|
{
 | 
						|
	if (!ccb->task)
 | 
						|
		return;
 | 
						|
	if (!sas_protocol_ata(task->task_proto))
 | 
						|
		if (ccb->n_elem)
 | 
						|
			dma_unmap_sg(pm8001_ha->dev, task->scatter,
 | 
						|
				task->num_scatter, task->data_dir);
 | 
						|
 | 
						|
	switch (task->task_proto) {
 | 
						|
	case SAS_PROTOCOL_SMP:
 | 
						|
		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
 | 
						|
			DMA_FROM_DEVICE);
 | 
						|
		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
 | 
						|
			DMA_TO_DEVICE);
 | 
						|
		break;
 | 
						|
 | 
						|
	case SAS_PROTOCOL_SATA:
 | 
						|
	case SAS_PROTOCOL_STP:
 | 
						|
	case SAS_PROTOCOL_SSP:
 | 
						|
	default:
 | 
						|
		/* do nothing */
 | 
						|
		break;
 | 
						|
	}
 | 
						|
	task->lldd_task = NULL;
 | 
						|
	ccb->task = NULL;
 | 
						|
	ccb->ccb_tag = 0xFFFFFFFF;
 | 
						|
	ccb->open_retry = 0;
 | 
						|
	pm8001_tag_free(pm8001_ha, ccb_idx);
 | 
						|
}
 | 
						|
 | 
						|
 /**
 | 
						|
  * pm8001_alloc_dev - find a empty pm8001_device
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  */
 | 
						|
static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 | 
						|
{
 | 
						|
	u32 dev;
 | 
						|
	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 | 
						|
		if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
 | 
						|
			pm8001_ha->devices[dev].id = dev;
 | 
						|
			return &pm8001_ha->devices[dev];
 | 
						|
		}
 | 
						|
	}
 | 
						|
	if (dev == PM8001_MAX_DEVICES) {
 | 
						|
		PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("max support %d devices, ignore ..\n",
 | 
						|
			PM8001_MAX_DEVICES));
 | 
						|
	}
 | 
						|
	return NULL;
 | 
						|
}
 | 
						|
/**
 | 
						|
  * pm8001_find_dev - find a matching pm8001_device
 | 
						|
  * @pm8001_ha: our hba card information
 | 
						|
  */
 | 
						|
struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
 | 
						|
					u32 device_id)
 | 
						|
{
 | 
						|
	u32 dev;
 | 
						|
	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 | 
						|
		if (pm8001_ha->devices[dev].device_id == device_id)
 | 
						|
			return &pm8001_ha->devices[dev];
 | 
						|
	}
 | 
						|
	if (dev == PM8001_MAX_DEVICES) {
 | 
						|
		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
 | 
						|
				"DEVICE FOUND !!!\n"));
 | 
						|
	}
 | 
						|
	return NULL;
 | 
						|
}
 | 
						|
 | 
						|
static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 | 
						|
{
 | 
						|
	u32 id = pm8001_dev->id;
 | 
						|
	memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 | 
						|
	pm8001_dev->id = id;
 | 
						|
	pm8001_dev->dev_type = SAS_PHY_UNUSED;
 | 
						|
	pm8001_dev->device_id = PM8001_MAX_DEVICES;
 | 
						|
	pm8001_dev->sas_device = NULL;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_dev_found_notify - libsas notify a device is found.
 | 
						|
  * @dev: the device structure which sas layer used.
 | 
						|
  *
 | 
						|
  * when libsas find a sas domain device, it should tell the LLDD that
 | 
						|
  * device is found, and then LLDD register this device to HBA firmware
 | 
						|
  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
 | 
						|
  * device ID(according to device's sas address) and returned it to LLDD. From
 | 
						|
  * now on, we communicate with HBA FW with the device ID which HBA assigned
 | 
						|
  * rather than sas address. it is the necessary step for our HBA but it is
 | 
						|
  * the optional for other HBA driver.
 | 
						|
  */
 | 
						|
static int pm8001_dev_found_notify(struct domain_device *dev)
 | 
						|
{
 | 
						|
	unsigned long flags = 0;
 | 
						|
	int res = 0;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = NULL;
 | 
						|
	struct domain_device *parent_dev = dev->parent;
 | 
						|
	struct pm8001_device *pm8001_device;
 | 
						|
	DECLARE_COMPLETION_ONSTACK(completion);
 | 
						|
	u32 flag = 0;
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
 | 
						|
	pm8001_device = pm8001_alloc_dev(pm8001_ha);
 | 
						|
	if (!pm8001_device) {
 | 
						|
		res = -1;
 | 
						|
		goto found_out;
 | 
						|
	}
 | 
						|
	pm8001_device->sas_device = dev;
 | 
						|
	dev->lldd_dev = pm8001_device;
 | 
						|
	pm8001_device->dev_type = dev->dev_type;
 | 
						|
	pm8001_device->dcompletion = &completion;
 | 
						|
	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
 | 
						|
		int phy_id;
 | 
						|
		struct ex_phy *phy;
 | 
						|
		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
 | 
						|
		phy_id++) {
 | 
						|
			phy = &parent_dev->ex_dev.ex_phy[phy_id];
 | 
						|
			if (SAS_ADDR(phy->attached_sas_addr)
 | 
						|
				== SAS_ADDR(dev->sas_addr)) {
 | 
						|
				pm8001_device->attached_phy = phy_id;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		if (phy_id == parent_dev->ex_dev.num_phys) {
 | 
						|
			PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("Error: no attached dev:%016llx"
 | 
						|
			" at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
 | 
						|
				SAS_ADDR(parent_dev->sas_addr)));
 | 
						|
			res = -1;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		if (dev->dev_type == SAS_SATA_DEV) {
 | 
						|
			pm8001_device->attached_phy =
 | 
						|
				dev->rphy->identify.phy_identifier;
 | 
						|
				flag = 1; /* directly sata*/
 | 
						|
		}
 | 
						|
	} /*register this device to HBA*/
 | 
						|
	PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
 | 
						|
	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
	wait_for_completion(&completion);
 | 
						|
	if (dev->dev_type == SAS_END_DEVICE)
 | 
						|
		msleep(50);
 | 
						|
	pm8001_ha->flags = PM8001F_RUN_TIME;
 | 
						|
	return 0;
 | 
						|
found_out:
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
int pm8001_dev_found(struct domain_device *dev)
 | 
						|
{
 | 
						|
	return pm8001_dev_found_notify(dev);
 | 
						|
}
 | 
						|
 | 
						|
void pm8001_task_done(struct sas_task *task)
 | 
						|
{
 | 
						|
	if (!del_timer(&task->slow_task->timer))
 | 
						|
		return;
 | 
						|
	complete(&task->slow_task->completion);
 | 
						|
}
 | 
						|
 | 
						|
static void pm8001_tmf_timedout(struct timer_list *t)
 | 
						|
{
 | 
						|
	struct sas_task_slow *slow = from_timer(slow, t, timer);
 | 
						|
	struct sas_task *task = slow->task;
 | 
						|
 | 
						|
	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 | 
						|
	complete(&task->slow_task->completion);
 | 
						|
}
 | 
						|
 | 
						|
#define PM8001_TASK_TIMEOUT 20
 | 
						|
/**
 | 
						|
  * pm8001_exec_internal_tmf_task - execute some task management commands.
 | 
						|
  * @dev: the wanted device.
 | 
						|
  * @tmf: which task management wanted to be take.
 | 
						|
  * @para_len: para_len.
 | 
						|
  * @parameter: ssp task parameter.
 | 
						|
  *
 | 
						|
  * when errors or exception happened, we may want to do something, for example
 | 
						|
  * abort the issued task which result in this execption, it is done by calling
 | 
						|
  * this function, note it is also with the task execute interface.
 | 
						|
  */
 | 
						|
static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 | 
						|
	void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
 | 
						|
{
 | 
						|
	int res, retry;
 | 
						|
	struct sas_task *task = NULL;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	struct pm8001_device *pm8001_dev = dev->lldd_dev;
 | 
						|
	DECLARE_COMPLETION_ONSTACK(completion_setstate);
 | 
						|
 | 
						|
	for (retry = 0; retry < 3; retry++) {
 | 
						|
		task = sas_alloc_slow_task(GFP_KERNEL);
 | 
						|
		if (!task)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
		task->dev = dev;
 | 
						|
		task->task_proto = dev->tproto;
 | 
						|
		memcpy(&task->ssp_task, parameter, para_len);
 | 
						|
		task->task_done = pm8001_task_done;
 | 
						|
		task->slow_task->timer.function = pm8001_tmf_timedout;
 | 
						|
		task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
 | 
						|
		add_timer(&task->slow_task->timer);
 | 
						|
 | 
						|
		res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf);
 | 
						|
 | 
						|
		if (res) {
 | 
						|
			del_timer(&task->slow_task->timer);
 | 
						|
			PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("Executing internal task "
 | 
						|
				"failed\n"));
 | 
						|
			goto ex_err;
 | 
						|
		}
 | 
						|
		wait_for_completion(&task->slow_task->completion);
 | 
						|
		if (pm8001_ha->chip_id != chip_8001) {
 | 
						|
			pm8001_dev->setds_completion = &completion_setstate;
 | 
						|
				PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 | 
						|
					pm8001_dev, 0x01);
 | 
						|
			wait_for_completion(&completion_setstate);
 | 
						|
		}
 | 
						|
		res = -TMF_RESP_FUNC_FAILED;
 | 
						|
		/* Even TMF timed out, return direct. */
 | 
						|
		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 | 
						|
			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 | 
						|
				PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
					pm8001_printk("TMF task[%x]timeout.\n",
 | 
						|
					tmf->tmf));
 | 
						|
				goto ex_err;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (task->task_status.resp == SAS_TASK_COMPLETE &&
 | 
						|
			task->task_status.stat == SAM_STAT_GOOD) {
 | 
						|
			res = TMF_RESP_FUNC_COMPLETE;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (task->task_status.resp == SAS_TASK_COMPLETE &&
 | 
						|
		task->task_status.stat == SAS_DATA_UNDERRUN) {
 | 
						|
			/* no error, but return the number of bytes of
 | 
						|
			* underrun */
 | 
						|
			res = task->task_status.residual;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (task->task_status.resp == SAS_TASK_COMPLETE &&
 | 
						|
			task->task_status.stat == SAS_DATA_OVERRUN) {
 | 
						|
			PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("Blocked task error.\n"));
 | 
						|
			res = -EMSGSIZE;
 | 
						|
			break;
 | 
						|
		} else {
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
				pm8001_printk(" Task to dev %016llx response:"
 | 
						|
				"0x%x status 0x%x\n",
 | 
						|
				SAS_ADDR(dev->sas_addr),
 | 
						|
				task->task_status.resp,
 | 
						|
				task->task_status.stat));
 | 
						|
			sas_free_task(task);
 | 
						|
			task = NULL;
 | 
						|
		}
 | 
						|
	}
 | 
						|
ex_err:
 | 
						|
	BUG_ON(retry == 3 && task != NULL);
 | 
						|
	sas_free_task(task);
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
 | 
						|
	u32 task_tag)
 | 
						|
{
 | 
						|
	int res, retry;
 | 
						|
	u32 ccb_tag;
 | 
						|
	struct pm8001_ccb_info *ccb;
 | 
						|
	struct sas_task *task = NULL;
 | 
						|
 | 
						|
	for (retry = 0; retry < 3; retry++) {
 | 
						|
		task = sas_alloc_slow_task(GFP_KERNEL);
 | 
						|
		if (!task)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
		task->dev = dev;
 | 
						|
		task->task_proto = dev->tproto;
 | 
						|
		task->task_done = pm8001_task_done;
 | 
						|
		task->slow_task->timer.function = pm8001_tmf_timedout;
 | 
						|
		task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
 | 
						|
		add_timer(&task->slow_task->timer);
 | 
						|
 | 
						|
		res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
 | 
						|
		if (res)
 | 
						|
			return res;
 | 
						|
		ccb = &pm8001_ha->ccb_info[ccb_tag];
 | 
						|
		ccb->device = pm8001_dev;
 | 
						|
		ccb->ccb_tag = ccb_tag;
 | 
						|
		ccb->task = task;
 | 
						|
		ccb->n_elem = 0;
 | 
						|
 | 
						|
		res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
 | 
						|
			pm8001_dev, flag, task_tag, ccb_tag);
 | 
						|
 | 
						|
		if (res) {
 | 
						|
			del_timer(&task->slow_task->timer);
 | 
						|
			PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("Executing internal task "
 | 
						|
				"failed\n"));
 | 
						|
			goto ex_err;
 | 
						|
		}
 | 
						|
		wait_for_completion(&task->slow_task->completion);
 | 
						|
		res = TMF_RESP_FUNC_FAILED;
 | 
						|
		/* Even TMF timed out, return direct. */
 | 
						|
		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 | 
						|
			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 | 
						|
				PM8001_FAIL_DBG(pm8001_ha,
 | 
						|
					pm8001_printk("TMF task timeout.\n"));
 | 
						|
				goto ex_err;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (task->task_status.resp == SAS_TASK_COMPLETE &&
 | 
						|
			task->task_status.stat == SAM_STAT_GOOD) {
 | 
						|
			res = TMF_RESP_FUNC_COMPLETE;
 | 
						|
			break;
 | 
						|
 | 
						|
		} else {
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
				pm8001_printk(" Task to dev %016llx response: "
 | 
						|
					"0x%x status 0x%x\n",
 | 
						|
				SAS_ADDR(dev->sas_addr),
 | 
						|
				task->task_status.resp,
 | 
						|
				task->task_status.stat));
 | 
						|
			sas_free_task(task);
 | 
						|
			task = NULL;
 | 
						|
		}
 | 
						|
	}
 | 
						|
ex_err:
 | 
						|
	BUG_ON(retry == 3 && task != NULL);
 | 
						|
	sas_free_task(task);
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
 | 
						|
  * @dev: the device structure which sas layer used.
 | 
						|
  */
 | 
						|
static void pm8001_dev_gone_notify(struct domain_device *dev)
 | 
						|
{
 | 
						|
	unsigned long flags = 0;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct pm8001_device *pm8001_dev = dev->lldd_dev;
 | 
						|
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
	if (pm8001_dev) {
 | 
						|
		u32 device_id = pm8001_dev->device_id;
 | 
						|
 | 
						|
		PM8001_DISC_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("found dev[%d:%x] is gone.\n",
 | 
						|
			pm8001_dev->device_id, pm8001_dev->dev_type));
 | 
						|
		if (pm8001_dev->running_req) {
 | 
						|
			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
			pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 | 
						|
				dev, 1, 0);
 | 
						|
			spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
		}
 | 
						|
		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
 | 
						|
		pm8001_free_dev(pm8001_dev);
 | 
						|
	} else {
 | 
						|
		PM8001_DISC_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("Found dev has gone.\n"));
 | 
						|
	}
 | 
						|
	dev->lldd_dev = NULL;
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
void pm8001_dev_gone(struct domain_device *dev)
 | 
						|
{
 | 
						|
	pm8001_dev_gone_notify(dev);
 | 
						|
}
 | 
						|
 | 
						|
static int pm8001_issue_ssp_tmf(struct domain_device *dev,
 | 
						|
	u8 *lun, struct pm8001_tmf_task *tmf)
 | 
						|
{
 | 
						|
	struct sas_ssp_task ssp_task;
 | 
						|
	if (!(dev->tproto & SAS_PROTOCOL_SSP))
 | 
						|
		return TMF_RESP_FUNC_ESUPP;
 | 
						|
 | 
						|
	strncpy((u8 *)&ssp_task.LUN, lun, 8);
 | 
						|
	return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
 | 
						|
		tmf);
 | 
						|
}
 | 
						|
 | 
						|
/* retry commands by ha, by task and/or by device */
 | 
						|
void pm8001_open_reject_retry(
 | 
						|
	struct pm8001_hba_info *pm8001_ha,
 | 
						|
	struct sas_task *task_to_close,
 | 
						|
	struct pm8001_device *device_to_close)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (pm8001_ha == NULL)
 | 
						|
		return;
 | 
						|
 | 
						|
	spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
 | 
						|
	for (i = 0; i < PM8001_MAX_CCB; i++) {
 | 
						|
		struct sas_task *task;
 | 
						|
		struct task_status_struct *ts;
 | 
						|
		struct pm8001_device *pm8001_dev;
 | 
						|
		unsigned long flags1;
 | 
						|
		u32 tag;
 | 
						|
		struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
 | 
						|
 | 
						|
		pm8001_dev = ccb->device;
 | 
						|
		if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
 | 
						|
			continue;
 | 
						|
		if (!device_to_close) {
 | 
						|
			uintptr_t d = (uintptr_t)pm8001_dev
 | 
						|
					- (uintptr_t)&pm8001_ha->devices;
 | 
						|
			if (((d % sizeof(*pm8001_dev)) != 0)
 | 
						|
			 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
 | 
						|
				continue;
 | 
						|
		} else if (pm8001_dev != device_to_close)
 | 
						|
			continue;
 | 
						|
		tag = ccb->ccb_tag;
 | 
						|
		if (!tag || (tag == 0xFFFFFFFF))
 | 
						|
			continue;
 | 
						|
		task = ccb->task;
 | 
						|
		if (!task || !task->task_done)
 | 
						|
			continue;
 | 
						|
		if (task_to_close && (task != task_to_close))
 | 
						|
			continue;
 | 
						|
		ts = &task->task_status;
 | 
						|
		ts->resp = SAS_TASK_COMPLETE;
 | 
						|
		/* Force the midlayer to retry */
 | 
						|
		ts->stat = SAS_OPEN_REJECT;
 | 
						|
		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
 | 
						|
		if (pm8001_dev)
 | 
						|
			pm8001_dev->running_req--;
 | 
						|
		spin_lock_irqsave(&task->task_state_lock, flags1);
 | 
						|
		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 | 
						|
		task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
 | 
						|
		task->task_state_flags |= SAS_TASK_STATE_DONE;
 | 
						|
		if (unlikely((task->task_state_flags
 | 
						|
				& SAS_TASK_STATE_ABORTED))) {
 | 
						|
			spin_unlock_irqrestore(&task->task_state_lock,
 | 
						|
				flags1);
 | 
						|
			pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 | 
						|
		} else {
 | 
						|
			spin_unlock_irqrestore(&task->task_state_lock,
 | 
						|
				flags1);
 | 
						|
			pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 | 
						|
			mb();/* in order to force CPU ordering */
 | 
						|
			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
			task->task_done(task);
 | 
						|
			spin_lock_irqsave(&pm8001_ha->lock, flags);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
  * Standard mandates link reset for ATA  (type 0) and hard reset for
 | 
						|
  * SSP (type 1) , only for RECOVERY
 | 
						|
  */
 | 
						|
int pm8001_I_T_nexus_reset(struct domain_device *dev)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_device *pm8001_dev;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct sas_phy *phy;
 | 
						|
 | 
						|
	if (!dev || !dev->lldd_dev)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	pm8001_dev = dev->lldd_dev;
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	phy = sas_get_local_phy(dev);
 | 
						|
 | 
						|
	if (dev_is_sata(dev)) {
 | 
						|
		if (scsi_is_sas_phy_local(phy)) {
 | 
						|
			rc = 0;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
		rc = sas_phy_reset(phy, 1);
 | 
						|
		if (rc) {
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("phy reset failed for device %x\n"
 | 
						|
			"with rc %d\n", pm8001_dev->device_id, rc));
 | 
						|
			rc = TMF_RESP_FUNC_FAILED;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
		msleep(2000);
 | 
						|
		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 | 
						|
			dev, 1, 0);
 | 
						|
		if (rc) {
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("task abort failed %x\n"
 | 
						|
			"with rc %d\n", pm8001_dev->device_id, rc));
 | 
						|
			rc = TMF_RESP_FUNC_FAILED;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		rc = sas_phy_reset(phy, 1);
 | 
						|
		msleep(2000);
 | 
						|
	}
 | 
						|
	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
 | 
						|
		pm8001_dev->device_id, rc));
 | 
						|
 out:
 | 
						|
	sas_put_local_phy(phy);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
* This function handle the IT_NEXUS_XXX event or completion
 | 
						|
* status code for SSP/SATA/SMP I/O request.
 | 
						|
*/
 | 
						|
int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_device *pm8001_dev;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct sas_phy *phy;
 | 
						|
 | 
						|
	if (!dev || !dev->lldd_dev)
 | 
						|
		return -1;
 | 
						|
 | 
						|
	pm8001_dev = dev->lldd_dev;
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
 | 
						|
	PM8001_EH_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("I_T_Nexus handler invoked !!"));
 | 
						|
 | 
						|
	phy = sas_get_local_phy(dev);
 | 
						|
 | 
						|
	if (dev_is_sata(dev)) {
 | 
						|
		DECLARE_COMPLETION_ONSTACK(completion_setstate);
 | 
						|
		if (scsi_is_sas_phy_local(phy)) {
 | 
						|
			rc = 0;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
		/* send internal ssp/sata/smp abort command to FW */
 | 
						|
		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 | 
						|
							dev, 1, 0);
 | 
						|
		msleep(100);
 | 
						|
 | 
						|
		/* deregister the target device */
 | 
						|
		pm8001_dev_gone_notify(dev);
 | 
						|
		msleep(200);
 | 
						|
 | 
						|
		/*send phy reset to hard reset target */
 | 
						|
		rc = sas_phy_reset(phy, 1);
 | 
						|
		msleep(2000);
 | 
						|
		pm8001_dev->setds_completion = &completion_setstate;
 | 
						|
 | 
						|
		wait_for_completion(&completion_setstate);
 | 
						|
	} else {
 | 
						|
		/* send internal ssp/sata/smp abort command to FW */
 | 
						|
		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 | 
						|
							dev, 1, 0);
 | 
						|
		msleep(100);
 | 
						|
 | 
						|
		/* deregister the target device */
 | 
						|
		pm8001_dev_gone_notify(dev);
 | 
						|
		msleep(200);
 | 
						|
 | 
						|
		/*send phy reset to hard reset target */
 | 
						|
		rc = sas_phy_reset(phy, 1);
 | 
						|
		msleep(2000);
 | 
						|
	}
 | 
						|
	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
 | 
						|
		pm8001_dev->device_id, rc));
 | 
						|
out:
 | 
						|
	sas_put_local_phy(phy);
 | 
						|
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
/* mandatory SAM-3, the task reset the specified LUN*/
 | 
						|
int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
	struct pm8001_device *pm8001_dev = dev->lldd_dev;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	DECLARE_COMPLETION_ONSTACK(completion_setstate);
 | 
						|
	if (dev_is_sata(dev)) {
 | 
						|
		struct sas_phy *phy = sas_get_local_phy(dev);
 | 
						|
		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 | 
						|
			dev, 1, 0);
 | 
						|
		rc = sas_phy_reset(phy, 1);
 | 
						|
		sas_put_local_phy(phy);
 | 
						|
		pm8001_dev->setds_completion = &completion_setstate;
 | 
						|
		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 | 
						|
			pm8001_dev, 0x01);
 | 
						|
		wait_for_completion(&completion_setstate);
 | 
						|
	} else {
 | 
						|
		tmf_task.tmf = TMF_LU_RESET;
 | 
						|
		rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
 | 
						|
	}
 | 
						|
	/* If failed, fall-through I_T_Nexus reset */
 | 
						|
	PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
 | 
						|
		pm8001_dev->device_id, rc));
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/* optional SAM-3 */
 | 
						|
int pm8001_query_task(struct sas_task *task)
 | 
						|
{
 | 
						|
	u32 tag = 0xdeadbeef;
 | 
						|
	int i = 0;
 | 
						|
	struct scsi_lun lun;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	if (unlikely(!task || !task->lldd_task || !task->dev))
 | 
						|
		return rc;
 | 
						|
 | 
						|
	if (task->task_proto & SAS_PROTOCOL_SSP) {
 | 
						|
		struct scsi_cmnd *cmnd = task->uldd_task;
 | 
						|
		struct domain_device *dev = task->dev;
 | 
						|
		struct pm8001_hba_info *pm8001_ha =
 | 
						|
			pm8001_find_ha_by_dev(dev);
 | 
						|
 | 
						|
		int_to_scsilun(cmnd->device->lun, &lun);
 | 
						|
		rc = pm8001_find_tag(task, &tag);
 | 
						|
		if (rc == 0) {
 | 
						|
			rc = TMF_RESP_FUNC_FAILED;
 | 
						|
			return rc;
 | 
						|
		}
 | 
						|
		PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
 | 
						|
		for (i = 0; i < 16; i++)
 | 
						|
			printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
 | 
						|
		printk(KERN_INFO "]\n");
 | 
						|
		tmf_task.tmf = 	TMF_QUERY_TASK;
 | 
						|
		tmf_task.tag_of_task_to_be_managed = tag;
 | 
						|
 | 
						|
		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
 | 
						|
		switch (rc) {
 | 
						|
		/* The task is still in Lun, release it then */
 | 
						|
		case TMF_RESP_FUNC_SUCC:
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("The task is still in Lun\n"));
 | 
						|
			break;
 | 
						|
		/* The task is not in Lun or failed, reset the phy */
 | 
						|
		case TMF_RESP_FUNC_FAILED:
 | 
						|
		case TMF_RESP_FUNC_COMPLETE:
 | 
						|
			PM8001_EH_DBG(pm8001_ha,
 | 
						|
			pm8001_printk("The task is not in Lun or failed,"
 | 
						|
			" reset the phy\n"));
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	pm8001_printk(":rc= %d\n", rc);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
 | 
						|
int pm8001_abort_task(struct sas_task *task)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
	u32 tag;
 | 
						|
	struct domain_device *dev ;
 | 
						|
	struct pm8001_hba_info *pm8001_ha;
 | 
						|
	struct scsi_lun lun;
 | 
						|
	struct pm8001_device *pm8001_dev;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED, ret;
 | 
						|
	u32 phy_id;
 | 
						|
	struct sas_task_slow slow_task;
 | 
						|
	if (unlikely(!task || !task->lldd_task || !task->dev))
 | 
						|
		return TMF_RESP_FUNC_FAILED;
 | 
						|
	dev = task->dev;
 | 
						|
	pm8001_dev = dev->lldd_dev;
 | 
						|
	pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
	phy_id = pm8001_dev->attached_phy;
 | 
						|
	rc = pm8001_find_tag(task, &tag);
 | 
						|
	if (rc == 0) {
 | 
						|
		pm8001_printk("no tag for task:%p\n", task);
 | 
						|
		return TMF_RESP_FUNC_FAILED;
 | 
						|
	}
 | 
						|
	spin_lock_irqsave(&task->task_state_lock, flags);
 | 
						|
	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 | 
						|
		spin_unlock_irqrestore(&task->task_state_lock, flags);
 | 
						|
		return TMF_RESP_FUNC_COMPLETE;
 | 
						|
	}
 | 
						|
	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 | 
						|
	if (task->slow_task == NULL) {
 | 
						|
		init_completion(&slow_task.completion);
 | 
						|
		task->slow_task = &slow_task;
 | 
						|
	}
 | 
						|
	spin_unlock_irqrestore(&task->task_state_lock, flags);
 | 
						|
	if (task->task_proto & SAS_PROTOCOL_SSP) {
 | 
						|
		struct scsi_cmnd *cmnd = task->uldd_task;
 | 
						|
		int_to_scsilun(cmnd->device->lun, &lun);
 | 
						|
		tmf_task.tmf = TMF_ABORT_TASK;
 | 
						|
		tmf_task.tag_of_task_to_be_managed = tag;
 | 
						|
		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
 | 
						|
		pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
 | 
						|
			pm8001_dev->sas_device, 0, tag);
 | 
						|
	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
 | 
						|
		task->task_proto & SAS_PROTOCOL_STP) {
 | 
						|
		if (pm8001_ha->chip_id == chip_8006) {
 | 
						|
			DECLARE_COMPLETION_ONSTACK(completion_reset);
 | 
						|
			DECLARE_COMPLETION_ONSTACK(completion);
 | 
						|
			struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
 | 
						|
 | 
						|
			/* 1. Set Device state as Recovery */
 | 
						|
			pm8001_dev->setds_completion = &completion;
 | 
						|
			PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 | 
						|
				pm8001_dev, 0x03);
 | 
						|
			wait_for_completion(&completion);
 | 
						|
 | 
						|
			/* 2. Send Phy Control Hard Reset */
 | 
						|
			reinit_completion(&completion);
 | 
						|
			phy->reset_success = false;
 | 
						|
			phy->enable_completion = &completion;
 | 
						|
			phy->reset_completion = &completion_reset;
 | 
						|
			ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 | 
						|
				PHY_HARD_RESET);
 | 
						|
			if (ret)
 | 
						|
				goto out;
 | 
						|
			PM8001_MSG_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("Waiting for local phy ctl\n"));
 | 
						|
			wait_for_completion(&completion);
 | 
						|
			if (!phy->reset_success)
 | 
						|
				goto out;
 | 
						|
 | 
						|
			/* 3. Wait for Port Reset complete / Port reset TMO */
 | 
						|
			PM8001_MSG_DBG(pm8001_ha,
 | 
						|
				pm8001_printk("Waiting for Port reset\n"));
 | 
						|
			wait_for_completion(&completion_reset);
 | 
						|
			if (phy->port_reset_status)
 | 
						|
				goto out;
 | 
						|
 | 
						|
			/*
 | 
						|
			 * 4. SATA Abort ALL
 | 
						|
			 * we wait for the task to be aborted so that the task
 | 
						|
			 * is removed from the ccb. on success the caller is
 | 
						|
			 * going to free the task.
 | 
						|
			 */
 | 
						|
			ret = pm8001_exec_internal_task_abort(pm8001_ha,
 | 
						|
				pm8001_dev, pm8001_dev->sas_device, 1, tag);
 | 
						|
			if (ret)
 | 
						|
				goto out;
 | 
						|
			ret = wait_for_completion_timeout(
 | 
						|
				&task->slow_task->completion,
 | 
						|
				PM8001_TASK_TIMEOUT * HZ);
 | 
						|
			if (!ret)
 | 
						|
				goto out;
 | 
						|
 | 
						|
			/* 5. Set Device State as Operational */
 | 
						|
			reinit_completion(&completion);
 | 
						|
			pm8001_dev->setds_completion = &completion;
 | 
						|
			PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 | 
						|
				pm8001_dev, 0x01);
 | 
						|
			wait_for_completion(&completion);
 | 
						|
		} else {
 | 
						|
			rc = pm8001_exec_internal_task_abort(pm8001_ha,
 | 
						|
				pm8001_dev, pm8001_dev->sas_device, 0, tag);
 | 
						|
		}
 | 
						|
		rc = TMF_RESP_FUNC_COMPLETE;
 | 
						|
	} else if (task->task_proto & SAS_PROTOCOL_SMP) {
 | 
						|
		/* SMP */
 | 
						|
		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
 | 
						|
			pm8001_dev->sas_device, 0, tag);
 | 
						|
 | 
						|
	}
 | 
						|
out:
 | 
						|
	spin_lock_irqsave(&task->task_state_lock, flags);
 | 
						|
	if (task->slow_task == &slow_task)
 | 
						|
		task->slow_task = NULL;
 | 
						|
	spin_unlock_irqrestore(&task->task_state_lock, flags);
 | 
						|
	if (rc != TMF_RESP_FUNC_COMPLETE)
 | 
						|
		pm8001_printk("rc= %d\n", rc);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
 | 
						|
	tmf_task.tmf = TMF_ABORT_TASK_SET;
 | 
						|
	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
 | 
						|
	tmf_task.tmf = TMF_CLEAR_ACA;
 | 
						|
	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
 | 
						|
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
 | 
						|
{
 | 
						|
	int rc = TMF_RESP_FUNC_FAILED;
 | 
						|
	struct pm8001_tmf_task tmf_task;
 | 
						|
	struct pm8001_device *pm8001_dev = dev->lldd_dev;
 | 
						|
	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 | 
						|
 | 
						|
	PM8001_EH_DBG(pm8001_ha,
 | 
						|
		pm8001_printk("I_T_L_Q clear task set[%x]\n",
 | 
						|
		pm8001_dev->device_id));
 | 
						|
	tmf_task.tmf = TMF_CLEAR_TASK_SET;
 | 
						|
	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 |