mirror of
https://github.com/torvalds/linux.git
synced 2025-11-01 09:09:47 +02:00
0851d34a8c
This patch adds support for non-threaded IRQs and handlers through irq::Registration and the irq::Handler trait. Registering an irq is dependent upon having a IrqRequest that was previously allocated by a given device. This will be introduced in subsequent patches. Tested-by: Joel Fernandes <joelagnelf@nvidia.com> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-3-0485dcd9bcbf@collabora.com [ Remove expect(dead_code) from Flags::into_inner(), add expect(dead_code) to IrqRequest::new(), fix intra-doc links. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
124 lines
5 KiB
Rust
124 lines
5 KiB
Rust
// SPDX-License-Identifier: GPL-2.0
|
|
// SPDX-FileCopyrightText: Copyright 2025 Collabora ltd.
|
|
|
|
use crate::bindings;
|
|
use crate::prelude::*;
|
|
|
|
/// Flags to be used when registering IRQ handlers.
|
|
///
|
|
/// Flags can be used to request specific behaviors when registering an IRQ
|
|
/// handler, and can be combined using the `|`, `&`, and `!` operators to
|
|
/// further control the system's behavior.
|
|
///
|
|
/// A common use case is to register a shared interrupt, as sharing the line
|
|
/// between devices is increasingly common in modern systems and is even
|
|
/// required for some buses. This requires setting [`Flags::SHARED`] when
|
|
/// requesting the interrupt. Other use cases include setting the trigger type
|
|
/// through `Flags::TRIGGER_*`, which determines when the interrupt fires, or
|
|
/// controlling whether the interrupt is masked after the handler runs by using
|
|
/// [`Flags::ONESHOT`].
|
|
///
|
|
/// If an invalid combination of flags is provided, the system will refuse to
|
|
/// register the handler, and lower layers will enforce certain flags when
|
|
/// necessary. This means, for example, that all the
|
|
/// [`crate::irq::Registration`] for a shared interrupt have to agree on
|
|
/// [`Flags::SHARED`] and on the same trigger type, if set.
|
|
#[derive(Clone, Copy, PartialEq, Eq)]
|
|
pub struct Flags(c_ulong);
|
|
|
|
impl Flags {
|
|
/// Use the interrupt line as already configured.
|
|
pub const TRIGGER_NONE: Flags = Flags::new(bindings::IRQF_TRIGGER_NONE);
|
|
|
|
/// The interrupt is triggered when the signal goes from low to high.
|
|
pub const TRIGGER_RISING: Flags = Flags::new(bindings::IRQF_TRIGGER_RISING);
|
|
|
|
/// The interrupt is triggered when the signal goes from high to low.
|
|
pub const TRIGGER_FALLING: Flags = Flags::new(bindings::IRQF_TRIGGER_FALLING);
|
|
|
|
/// The interrupt is triggered while the signal is held high.
|
|
pub const TRIGGER_HIGH: Flags = Flags::new(bindings::IRQF_TRIGGER_HIGH);
|
|
|
|
/// The interrupt is triggered while the signal is held low.
|
|
pub const TRIGGER_LOW: Flags = Flags::new(bindings::IRQF_TRIGGER_LOW);
|
|
|
|
/// Allow sharing the IRQ among several devices.
|
|
pub const SHARED: Flags = Flags::new(bindings::IRQF_SHARED);
|
|
|
|
/// Set by callers when they expect sharing mismatches to occur.
|
|
pub const PROBE_SHARED: Flags = Flags::new(bindings::IRQF_PROBE_SHARED);
|
|
|
|
/// Flag to mark this interrupt as timer interrupt.
|
|
pub const TIMER: Flags = Flags::new(bindings::IRQF_TIMER);
|
|
|
|
/// Interrupt is per CPU.
|
|
pub const PERCPU: Flags = Flags::new(bindings::IRQF_PERCPU);
|
|
|
|
/// Flag to exclude this interrupt from irq balancing.
|
|
pub const NOBALANCING: Flags = Flags::new(bindings::IRQF_NOBALANCING);
|
|
|
|
/// Interrupt is used for polling (only the interrupt that is registered
|
|
/// first in a shared interrupt is considered for performance reasons).
|
|
pub const IRQPOLL: Flags = Flags::new(bindings::IRQF_IRQPOLL);
|
|
|
|
/// Interrupt is not re-enabled after the hardirq handler finished. Used by
|
|
/// threaded interrupts which need to keep the irq line disabled until the
|
|
/// threaded handler has been run.
|
|
pub const ONESHOT: Flags = Flags::new(bindings::IRQF_ONESHOT);
|
|
|
|
/// Do not disable this IRQ during suspend. Does not guarantee that this
|
|
/// interrupt will wake the system from a suspended state.
|
|
pub const NO_SUSPEND: Flags = Flags::new(bindings::IRQF_NO_SUSPEND);
|
|
|
|
/// Force enable it on resume even if [`Flags::NO_SUSPEND`] is set.
|
|
pub const FORCE_RESUME: Flags = Flags::new(bindings::IRQF_FORCE_RESUME);
|
|
|
|
/// Interrupt cannot be threaded.
|
|
pub const NO_THREAD: Flags = Flags::new(bindings::IRQF_NO_THREAD);
|
|
|
|
/// Resume IRQ early during syscore instead of at device resume time.
|
|
pub const EARLY_RESUME: Flags = Flags::new(bindings::IRQF_EARLY_RESUME);
|
|
|
|
/// If the IRQ is shared with a [`Flags::NO_SUSPEND`] user, execute this
|
|
/// interrupt handler after suspending interrupts. For system wakeup devices
|
|
/// users need to implement wakeup detection in their interrupt handlers.
|
|
pub const COND_SUSPEND: Flags = Flags::new(bindings::IRQF_COND_SUSPEND);
|
|
|
|
/// Don't enable IRQ or NMI automatically when users request it. Users will
|
|
/// enable it explicitly by `enable_irq` or `enable_nmi` later.
|
|
pub const NO_AUTOEN: Flags = Flags::new(bindings::IRQF_NO_AUTOEN);
|
|
|
|
/// Exclude from runnaway detection for IPI and similar handlers, depends on
|
|
/// `PERCPU`.
|
|
pub const NO_DEBUG: Flags = Flags::new(bindings::IRQF_NO_DEBUG);
|
|
|
|
pub(crate) fn into_inner(self) -> c_ulong {
|
|
self.0
|
|
}
|
|
|
|
const fn new(value: u32) -> Self {
|
|
build_assert!(value as u64 <= c_ulong::MAX as u64);
|
|
Self(value as c_ulong)
|
|
}
|
|
}
|
|
|
|
impl core::ops::BitOr for Flags {
|
|
type Output = Self;
|
|
fn bitor(self, rhs: Self) -> Self::Output {
|
|
Self(self.0 | rhs.0)
|
|
}
|
|
}
|
|
|
|
impl core::ops::BitAnd for Flags {
|
|
type Output = Self;
|
|
fn bitand(self, rhs: Self) -> Self::Output {
|
|
Self(self.0 & rhs.0)
|
|
}
|
|
}
|
|
|
|
impl core::ops::Not for Flags {
|
|
type Output = Self;
|
|
fn not(self) -> Self::Output {
|
|
Self(!self.0)
|
|
}
|
|
}
|