On macOS, we fall back eKeyPress event to native menu. Therefore, widget always requests a reply from remote process because it's difficult to check if the eKeyPress event will be sent to a remote process actually. If it's not sent to any remote processes, PresShell needs to dispatch the event into the DOM tree. Additionally, even if it's marked as "waiting reply from remote process", it needs to dispatch the DOM event in the main process first because we need to check if the key combination is reserved by chrome (if it's reserved, the eKeyPress event shouldn't be fired in the remote process).
Therefore, this patch makes EventStateManager::PreHandleEvent() resets the state when focused content isn't in any remote processes and the event's propagation hasn't been stopped.
Additionally, this patch makes PresShell::HandleEventInternal() checks WidgetEvent::PropgationStopped() with WidgetEvent::IsWaitingReplyFromRemoteProcess() before dispatching the event into the DOM tree.
MozReview-Commit-ID: FmgL3rCuQ8y
--HG--
extra : rebase_source : aa8d6b924fc78d1d9dd35a35c92976c35c758657
Currently, access key is handled in EventStateManager::PreHandleEvent() with eKeyPress event, i.e., before dispatching it into the DOM tree, if the access key is registered in EventStateManager. So, the main process does not check if the preceding eKeyDown event is consumed in focused remote process.
When preceding eKeyDown event is consumed in the main process, eKeyPress event won't be dispatched by widget. However, if remote process has focus, it's impossible widget to stop dispatching eKeyPress event because preceding eKeyDown event hasn't been handled in the focused remote process yet. Therefore, main process needs to post eKeyPress event to check if preceding eKeyDown event was consumed. When eKeyPress event is marked as "waiting reply from remote process", TabChild sends it back to the main process only when preceding eKeyDown event wasn't consumed. So, only when eKeyPress event is back to the main process, main process should handle accesskey with it.
This patch makes EventStateManager::PreHandleEvent() check if a remote target has focus before handling accesskey. If a remote process has accesskey and there is an accesskey matching with eKeyPress event, it marks the event as "waiting reply from remote content" and stop propagation in the process.
Finally, when eKeyPress event is sent back to TabParent, TabParent::RecvReplyKeyEvent() calls EventStateManager::HandleAccessKey() before dispatching the reply event into the DOM tree.
MozReview-Commit-ID: KsOkakaIVzb
--HG--
extra : rebase_source : 7e0c6966a1bde085e34d45bca4b0166b9fc2f3f1
DOM Standard defines that offset of Range is unsigned long. However, nsRange uses int32_t to them.
This patch makes nsRange use uint32_t instead. However, this patch does NOT allow to set over INT32_MAX as offset values since a lot of users of nsRange cannot treat the values as over INT32_MAX because a lot of internal APIs take int32_t as offsets.
For easier to search such points, this patch adds static_cast<int32_t> to uint32_t variables when they are used for int32_t arguments.
And note that nsContentUtils::ComparePoints() behaves odd. It accepts negative offset and compares such value with valid offset simply. This patch still uses int32_t offset variables in nsRange::CompareNodeToRange() even though it may be negative value if nsINode::IndexOf() returns -1 because the caller of it depends on this behavior.
MozReview-Commit-ID: 8RbOgA86JuT
--HG--
extra : rebase_source : 46d526c6d50dfa2f104439b19b8691477b17a4af
This commit changes async keyboard scrolling to be enabled only if the content to
scroll is from a selection. This works around the problem of detecting whether
an arbitrary element has key listeners that should prevent async key scrolling,
because when they have the focus we will have disabled async key scrolling.
MozReview-Commit-ID: 6HhSuGZNsMX
--HG--
extra : rebase_source : 98a6449dd1e913136ca66532a67df8e0bb717e52
This does NOT change variable names like |endNode| because it's not odd and somebody use it for nsINode and endContent for nsIContent. So, changing them needs more work.
MozReview-Commit-ID: 22imUltlu5R
--HG--
extra : rebase_source : 6c93069d0586b37c5084eaa71861085c01da7a7d
This does NOT change variable names like |startNode| because it's not odd and somebody use it for nsINode and startContent for nsIContent. So, changing them needs more work.
MozReview-Commit-ID: H19pTDprRuT
--HG--
extra : rebase_source : 7a7454ac14da48a597ff19a50c863d04dcaddd6e
Web standards use "Container" instead of "Parent". So, nsRange shouldn't use "Parent" for its members and methods.
MozReview-Commit-ID: Ho6N0diuWtE
--HG--
extra : rebase_source : ee4eb7068a68b118c7fe98e9e9e7fa9c9e7f13e2
Most of this patch is updating a few places that use gfxMatrix to use
the equivalent-but-differently-named functions on MatrixDouble:
- Translate/Rotate/Scale get turned into PreTranslate/PreRotate/PreScale
- Transform(Point) gets turned into TransformPoint(Point)
- gfxMatrix::TransformBounds(gfxRect) gets turned into
gfxRect::TransformBoundsBy(gfxMatrix).
- gfxMatrix::Transform(gfxRect) gets turned into
gfxRect::TransformBy(gfxMatrix).
The last two functions are added in this patch as convenience wrappers
to gfxRect instead of Matrix.h because we don't want Matrix.h to "know"
about gfxRect (to avoid adding gecko dependencies on Moz2D). Once we
turn gfxRect into a typedef for RectDouble these will be eliminated
anyway.
MozReview-Commit-ID: BnOjHzmOSKn
--HG--
extra : rebase_source : cf1692d1f0d44a4b05d684a66678739181a426d5
We need to call nsBindingManager's method from ServoStyleSet in a later
patch.
Also, we call nsStyleSet::SetBindingManager() immediately after we call
nsStyleSet::Init(). Therefore, we could pass binding manager to Init()
directly, and delete SetBindingManager().
MozReview-Commit-ID: 43WTpW3mSKX
--HG--
extra : rebase_source : f24f6085c51dfae1a969aee1e073720097d240d5
This commit also schedules empty transactions on input events that trigger a
focus sequence number update.
MozReview-Commit-ID: 1FWXfStLsGv
--HG--
extra : rebase_source : 02c6f07287b6909493f6f88345a3cca93ab3e45b
When keyboard apz is disabled, we don't need to calculate focus targets and
we don't need to update focus state. It should be harmless even if it's done,
but I think it's good to not add something on this critical path that doesn't
do anything.
This commit also disable keyboard map generation in this case too for similar
reasoning. This has the side effect that you can't turn on keyboard apz without
doing a restart.
MozReview-Commit-ID: LxmofT2g7qs
--HG--
extra : rebase_source : 719d29efd80498b824fee03a5be1c1fd05c83074
extra : histedit_source : 7ad71a19782fc6dd203207afbdc7a73a936b3e04
Focus can change at any moment in a document. This causes non-determinism and
correctness problems for doing keyboard apz scrolling. To get around this, we
will maintain deterministic behavior for focus changes initiated by input events
and see if we can get away with more non-determinism for things like `setTimeout`
In order to do this, we disable async keyboard scrolling when an input event is
processed that could have a event listener. We then attach a sequence number to
that input event and dispatch it to content. In content, we record the highest
sequence number that we have processed from an event, and send that on each focus
update. Using this, we can determine in APZ if we have a current focus target or
if we are still waiting for an input event to be processed and focus to be
reconfirmed.
MozReview-Commit-ID: CWcu8YEFQz4
--HG--
extra : rebase_source : 8c54a619bd4f5ee892f0cc8768a10f3e1e4e0b59
extra : histedit_source : 601ca293a028787883841adc6b40e62c0cc829e5
This commit modifies PresShell and nsDisplayList to send a FocusTarget update on
every layer transaction. Ideally we would like to send updates as often as possible,
but this seems like it works well. This can be iterated on later, if necessary.
MozReview-Commit-ID: 8PFqIOhzH77
--HG--
extra : rebase_source : 1e2c3b5620f5d7e6e789848da57b2486c3d74f14
This commit begins the work needed for tracking focus by creating two new classes,
FocusTarget and FocusState. FocusState is created and used by APZCTreeManager to
track the global focus information, while FocusTarget is created per layer tree and
sent to APZ with local focus information. Between the two we are able to figure out
what the correct scrollable layer is to use in response to a keyboard scroll.
See the comment in `FocusState.h` for more details on the architecture and things
needed in future patches to complete this.
MozReview-Commit-ID: F75VZv3i9U2
--HG--
extra : rebase_source : 3d04bced8e13a9884f0c1b320bad8ba2205d7011
This patch makes the following changes to the macros.
- Removes PROFILER_LABEL_FUNC. It's only suitable for use in functions outside
classes, due to PROFILER_FUNCTION_NAME not getting class names, and it was
mostly misused.
- Removes PROFILER_FUNCTION_NAME. It's no longer used, and __func__ is
universally available now anyway.
- Combines the first two string literal arguments of PROFILER_LABEL and
PROFILER_LABEL_DYNAMIC into a single argument. There was no good reason for
them to be separate, and it forced a '::' in the label, which isn't always
appropriate. Also, the meaning of the "name_space" argument was interpreted
in an interesting variety of ways.
- Adds an "AUTO_" prefix to PROFILER_LABEL and PROFILER_LABEL_DYNAMIC, to make
it clearer they construct RAII objects rather than just being function calls.
(I myself have screwed up the scoping because of this in the past.)
- Fills in the 'js::ProfileEntry::Category::' qualifier within the macro, so
the caller doesn't need to. This makes a *lot* more of the uses fit onto a
single line.
The patch also makes the following changes to the macro uses (beyond those
required by the changes described above).
- Fixes a bunch of labels that had gotten out of sync with the name of the
class and/or function that encloses them.
- Removes a useless PROFILER_LABEL use within a trivial scope in
EventStateManager::DispatchMouseOrPointerEvent(). It clearly wasn't serving
any useful purpose. It also serves as extra evidence that the AUTO_ prefix is
a good idea.
- Tweaks DecodePool::SyncRunIf{Preferred,Possible} so that the labelling is
done within them, instead of at their callsites, because that's a more
standard way of doing things.
--HG--
extra : rebase_source : 318d1bc6fc1425a94aacbf489dd46e4f83211de4
This patch reduces the differences between builds where the profiler is enabled
and those where the profiler is disabled. It does this by removing numerous
MOZ_GECKO_PROFILER checks.
These changes have the following consequences.
- Various functions and classes are now defined in all builds, and so can be
used unconditionally: profiler_add_marker(), profiler_set_js_context(),
profiler_clear_js_context(), profiler_get_pseudo_stack(), AutoProfilerLabel.
(They are effectively no-ops in non-profiler builds, of course.)
- The no-op versions of PROFILER_* are now gone. The remaining versions are
almost no-ops when the profiler isn't built.
--HG--
extra : rebase_source : 8fb5e8757600210c2f77865694d25162f0b7698a
