<!-- Please describe your changes on the following line: -->
… so that Stylo can re-use it.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1295865
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refator
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 626d093245066755c751510d2c09a9b864b129fd
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes partially fix#12415 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because they do not add any features
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a466f43fe532157d2100788080e132b00864dd36
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
These new functions are derived from the existing uniform*fv
functions. They get used in a lot of demo code, so it should greatly
improve our compatibility.
This regresses uniformMatrixBadArgs.html, which gets at an existing
problem in our uniform matrix support (failure to validate
that the uniform is a matrix before calling down) but previously just
failed because it only called the 'fv' variants and never the existing
'f' variants.
Source-Repo: https://github.com/servo/servo
Source-Revision: aab9d61025fe72bdcb37f13c9cc53b787a636036
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
This is a change set with multiple intentions:
* Be correct.
* Unlock tests that are blocking @anholt.
* Ease the transition to typed arrays once the changes by @Ms2ger start rolling
in, since I expect the amount of test expectations to update to be
non-trivial.
I expect having it to run on try a few times, but... r? @nox or @KiChjang
Source-Repo: https://github.com/servo/servo
Source-Revision: ddff5ce2eb635ff1c51ed7fee2d33e890c541221
Instead of letting the compositor try to find the correct scroll
layer for a touch event, switch touch events to work the same way
that mouse events do.
Touch events are now dispatched to the root pipeline, and then
forwarded to child iframes as required.
Source-Repo: https://github.com/servo/servo
Source-Revision: 9d3fc76463cb226ffeb9a6aca7239bbe36543802
<!-- Please describe your changes on the following line: -->
minimal SVG element implementation
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12974 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: dad3b4785a73aa6ddea5ed50ee4ef01bd4049c8d
<!-- Please describe your changes on the following line: -->
This PR stores the FrameId as well as the PipelineId in an html iframe. The iframes are now responsible for creating frame ids, not the constellation.
This is the first step in fixing #633, because it means we know the frame id of each script thread when it is created. It also means we can share the frame id, for example using it in the debugger.
cc @jdm, @ConnorGBrewster and @ejpbruel.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's a refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d01a8662154924a551c8d7a2f12b22bcaf998a7c
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
--HG--
rename : servo/components/script/dom/webidls/ServoXMLParser.webidl => servo/components/script/dom/webidls/GlobalScope.webidl
<!-- Please describe your changes on the following line: -->
The session history is stored in the constellation and accessed via the `History` object, so `BrowsingContext` doesn't need to track it.
cc @jdm @ConnorGBrewster @Ms2ger
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's a refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 896be066dd34e4d5f5f2c6425c093f5fa091401b
<!-- Please describe your changes on the following line: -->
Cleans up code as described in #13586 by returning early instead of nesting everything in an `if` statement.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13586
<!-- Either: -->
- [x] These changes do not require tests because the change is a cleanup of code and the author of the issue stated that new tests were not required.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
…istener
Source-Repo: https://github.com/servo/servo
Source-Revision: 596fdf2fef0c2e0a3d02ce9f7ed3cd5a1c0480a6
<!-- Please describe your changes on the following line: -->
As part of #13127.
cc @aneeshusa
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 19a5a30113c3b58d69b6010c79db35b9bd8978c9
<!-- Please describe your changes on the following line: -->
As discussed in https://bugzilla.mozilla.org/show_bug.cgi?id=1305141Closes#13176
---
Original PR title: Stop relying on `impl<T: HeapSizeOf> HeapSizeOf for Arc<T>`
https://github.com/servo/heapsize/issues/37#issuecomment-249861171
This builds on top of that.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: aea9545e16fd6ea4a6b1234d1b969457313a5fa7
--HG--
rename : servo/components/style/domrefcell.rs => servo/components/script/dom/bindings/cell.rs
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13481 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d42235ee905acf6bea7f5983c77124b8be9656fc
<!-- Please describe your changes on the following line: -->
Implement WebGLRenderingContext::{validateProgram, getProgramInfoLog} and improve WebGL testcase to show shader link and validation errors.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13199 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fc251384a76547167c027d69c28deae8c410c626
The same expanded hyper::method::Method method was used throughout the file, causing unneeded repetition. Import this method as HttpMethod and replace all references in the file.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13543 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bdeb76b27b1327d98f533fe7fa25b0aa3cf42c7d
Remove the ignore-heap-size comment to enable the memory measurement.
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#6909
- [x] These changes do not require tests because they just enabled memory measurement
@jdm the build fails, and I'm not so sure why. Assistance please? 😄
Source-Repo: https://github.com/servo/servo
Source-Revision: 36222cf543731af71b22d5fb8e3f17c6c51af895
<!-- Please describe your changes on the following line: -->
Initial patch to support promises in WebBluetooth.
This will allow us to use the expected syntax in webpages.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0c80ac9a1ba14966165ddb6b91f7c6efda6c2eae
<!-- Please describe your changes on the following line: -->
The spec removed it. Check the scheme instead, data is always same origin now,
except for workers.
Closes#13362
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13362 .
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they only remove code.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e494dedce5e5215d6d0953ab28668825234237dc
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13451 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
The `forEach` method installed on iterable DOM interfaces uses SpiderMonkey's self-hosted implementation of `Array.prototype.forEach`, but it has the wrong value for `nargs`, causing failing asserts in debug and wrong behavior in release builds.
Fixes#13451
Source-Repo: https://github.com/servo/servo
Source-Revision: c212234258524af4cd7346b5ee1224a94ebedca9
<!-- Please describe your changes on the following line: -->
This PR implements the fetch method, which is described in [the Fetch Spec](https://fetch.spec.whatwg.org/#fetch-method). The expected wpt results are updated as well.
A few comments about the current fetch implementation:
- The fetch method manually calls `JSAutoCompartment` in order to prevent SpiderMonkey from crashing. This may have to change in the future.
- Not all `FetchResponseListener` methods are implemented.
- `net_traits::CoreResourceMsg::Fetch` message takes a `net_traits::request::RequestInit`. However, when the fetch method is called, a `RequestBinding::RequestInit` is given. The fetch method constructs a `dom::request::Request` with the given `RequestInit`, then creates `net_traits::request::RequestInit` from the dom Request object for the fetch message.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11898 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5996e008a34dd92602acb7bbd3ea41a880053110
<!-- Please describe your changes on the following line: -->
This PR adds dom::Response and dom::Request's `Text()`, `Blob()`, `Json()`, and (part of the) `FormData()` functions, part of the [Body mixin](https://fetch.spec.whatwg.org/#body). The corresponding tests have also been updated as passing.
@jeenalee also contributed to this PR, primarily the `Blob()`, `Json()`, and `FormData()` implementations.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a03a5e814a7003ba9697aa37d7492cf9e6425ea4
This also causes a number of tests that currently time out to fail quickly.
Source-Repo: https://github.com/servo/servo
Source-Revision: 0ee35a3b34a8b314ec2503354c385f5d58d70518
First pass at fixing #10580.
I've added a new macro that returns a DomString with either the attr val or the doc url.
I then made the form element use that macro on the action attribute.
I also added a test that contains an iframe with a form and base url that submits to a page in
a resources directory.
I made all these changes based on https://github.com/servo/servo/pull/11219#issuecomment-223318881.
The only thing I'm confused on is how to change step 8. It looks to just be getting the action so I'm wondering if I need to change either step 9 or 10 instead?
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#10580 (github issue number if applicable).
- [X] There are tests for these changes OR
using that macro with the form action,
making the form submit process use base url,
adding tests.
Source-Repo: https://github.com/servo/servo
Source-Revision: 040075ad085f7e74f207241fedba144d710f42b7
Media element network response processing code should invoke failure steps if there's no metadata.
Fixes#13375.
Source-Repo: https://github.com/servo/servo
Source-Revision: ec5ae8562d2c1f78a4fc65254b31759cf8b1b0cd
All of our generated code for script contains inline code like this:
```
let result = panic::catch_unwind(AssertUnwindSafe(|| {
...
};
match result {
Ok(result) => result,
Err(error) => {
store_panic_result(error);
return false;
}
}
```
This PR change it to something like this:
```
wrap_panic(|| { ... }, false)
```
---
- [X] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [X] These changes fix#13377
- [ ] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 06bb57bdcb7eb60ffe4058ced7301a5f285eede5
Step 2 of: https://html.spec.whatwg.org/multipage/browsers.html#dom-location-assign says we should throw an error. This makes it do that.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13420 (github issue number if applicable).
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: ef1b594f4836a0ff9f82960c5bdcbd038f72f8f0
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13231 (github issue number if applicable).
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d03f0a20cc0f98ee55fbca65d71ff59026bee323
<!-- Please describe your changes on the following line: -->
Implement HTMLOptionsCollection and related HTMLSelectElement items
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13129 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7de13a6e26665322f5d9a6c51b7aa99caaa96110
Fixes#13196
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13196.
- [X] These changes do not require tests because the functionality hasn't changed
Source-Repo: https://github.com/servo/servo
Source-Revision: 9b7708063aec5dbabc96cd93e16028e0ee6e14cd
<!-- Please describe your changes on the following line: -->
The old specification URL is
https://slightlyoff.github.io/ServiceWorker/spec/service_worker/, which has
been replaced by the new one at https://w3c.github.io/ServiceWorker/.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13408 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because all the changes are in commented parts of the code.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
The old specification URL is
https://slightlyoff.github.io/ServiceWorker/spec/service_worker/ has
been replaced by the new one at https://w3c.github.io/ServiceWorker/.
Source-Repo: https://github.com/servo/servo
Source-Revision: d00639c55f9a342765483d347a3c29d4647f7411
Implement FormData's iterator
Rebased from #13104.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13020
- [X] There are tests for these changes (It adds `./mach test-wpt tests/wpt/web-platform-tests/XMLHttpRequest/formdata-foreach.html`)
Notice: Our `FormData` is implemented by `HashMap` , which is different from [Gecko's array implementation](3c6ff93c8f/dom/base/FormData.h (L160)). So our `FormData`'s iterator order is different from Gecko's, as there is no way to keep our key's original insertion order.
Source-Repo: https://github.com/servo/servo
Source-Revision: 89804bb2516dc9a1e718e667b77cee4fe2552101
