forked from mirrors/linux
		
	i2c: add support for Socionext SynQuacer I2C controller
This is a cleaned up version of the I2C controller driver for the Fujitsu F_I2C IP, which was never supported upstream, and has now been incorporated into the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [wsa: updated MAINTAINERS entry and removed two empty lines] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
		
							parent
							
								
									730b35e08c
								
							
						
					
					
						commit
						0d676a6c43
					
				
					 4 changed files with 685 additions and 0 deletions
				
			
		|  | @ -12816,6 +12816,13 @@ F:	include/media/soc* | ||||||
| F:	drivers/media/i2c/soc_camera/ | F:	drivers/media/i2c/soc_camera/ | ||||||
| F:	drivers/media/platform/soc_camera/ | F:	drivers/media/platform/soc_camera/ | ||||||
| 
 | 
 | ||||||
|  | SOCIONEXT SYNQUACER I2C DRIVER | ||||||
|  | M:	Ard Biesheuvel <ard.biesheuvel@linaro.org> | ||||||
|  | L:	linux-i2c@vger.kernel.org | ||||||
|  | S:	Maintained | ||||||
|  | F:	drivers/i2c/busses/i2c-synquacer.c | ||||||
|  | F:	Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | ||||||
|  | 
 | ||||||
| SOCIONEXT UNIPHIER SOUND DRIVER | SOCIONEXT UNIPHIER SOUND DRIVER | ||||||
| M:	Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> | M:	Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> | ||||||
| L:	alsa-devel@alsa-project.org (moderated for non-subscribers) | L:	alsa-devel@alsa-project.org (moderated for non-subscribers) | ||||||
|  |  | ||||||
|  | @ -997,6 +997,16 @@ config I2C_SUN6I_P2WI | ||||||
| 	  This interface is used to connect to specific PMIC devices (like the | 	  This interface is used to connect to specific PMIC devices (like the | ||||||
| 	  AXP221). | 	  AXP221). | ||||||
| 
 | 
 | ||||||
|  | config I2C_SYNQUACER | ||||||
|  | 	tristate "Socionext SynQuacer I2C controller" | ||||||
|  | 	depends on ARCH_SYNQUACER || COMPILE_TEST | ||||||
|  | 	help | ||||||
|  | 	  Say Y here to include support for the I2C controller used in some | ||||||
|  | 	  Fujitsu and Socionext SoCs. | ||||||
|  | 
 | ||||||
|  | 	  This driver can also be built as a module. If so, the module | ||||||
|  | 	  will be called i2c-synquacer. | ||||||
|  | 
 | ||||||
| config I2C_TEGRA | config I2C_TEGRA | ||||||
| 	tristate "NVIDIA Tegra internal I2C controller" | 	tristate "NVIDIA Tegra internal I2C controller" | ||||||
| 	depends on ARCH_TEGRA | 	depends on ARCH_TEGRA | ||||||
|  |  | ||||||
|  | @ -98,6 +98,7 @@ obj-$(CONFIG_I2C_STM32F4)	+= i2c-stm32f4.o | ||||||
| obj-$(CONFIG_I2C_STM32F7)	+= i2c-stm32f7.o | obj-$(CONFIG_I2C_STM32F7)	+= i2c-stm32f7.o | ||||||
| obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o | obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o | ||||||
| obj-$(CONFIG_I2C_SUN6I_P2WI)	+= i2c-sun6i-p2wi.o | obj-$(CONFIG_I2C_SUN6I_P2WI)	+= i2c-sun6i-p2wi.o | ||||||
|  | obj-$(CONFIG_I2C_SYNQUACER)	+= i2c-synquacer.o | ||||||
| obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o | obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o | ||||||
| obj-$(CONFIG_I2C_TEGRA_BPMP)	+= i2c-tegra-bpmp.o | obj-$(CONFIG_I2C_TEGRA_BPMP)	+= i2c-tegra-bpmp.o | ||||||
| obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o | obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o | ||||||
|  |  | ||||||
							
								
								
									
										667
									
								
								drivers/i2c/busses/i2c-synquacer.c
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										667
									
								
								drivers/i2c/busses/i2c-synquacer.c
									
									
									
									
									
										Normal file
									
								
							|  | @ -0,0 +1,667 @@ | ||||||
|  | // SPDX-License-Identifier: GPL-2.0
 | ||||||
|  | /*
 | ||||||
|  |  * Copyright (C) 2012 FUJITSU SEMICONDUCTOR LIMITED | ||||||
|  |  */ | ||||||
|  | 
 | ||||||
|  | #include <linux/acpi.h> | ||||||
|  | #include <linux/clk.h> | ||||||
|  | #include <linux/delay.h> | ||||||
|  | #include <linux/device.h> | ||||||
|  | #include <linux/err.h> | ||||||
|  | #include <linux/errno.h> | ||||||
|  | #include <linux/i2c.h> | ||||||
|  | #include <linux/interrupt.h> | ||||||
|  | #include <linux/io.h> | ||||||
|  | #include <linux/kernel.h> | ||||||
|  | #include <linux/module.h> | ||||||
|  | #include <linux/platform_device.h> | ||||||
|  | #include <linux/sched.h> | ||||||
|  | #include <linux/slab.h> | ||||||
|  | #include <linux/spinlock.h> | ||||||
|  | 
 | ||||||
|  | #define WAIT_PCLK(n, rate)	\ | ||||||
|  | 	ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10) | ||||||
|  | 
 | ||||||
|  | /* I2C register address definitions */ | ||||||
|  | #define SYNQUACER_I2C_REG_BSR		(0x00 << 2) // Bus Status
 | ||||||
|  | #define SYNQUACER_I2C_REG_BCR		(0x01 << 2) // Bus Control
 | ||||||
|  | #define SYNQUACER_I2C_REG_CCR		(0x02 << 2) // Clock Control
 | ||||||
|  | #define SYNQUACER_I2C_REG_ADR		(0x03 << 2) // Address
 | ||||||
|  | #define SYNQUACER_I2C_REG_DAR		(0x04 << 2) // Data
 | ||||||
|  | #define SYNQUACER_I2C_REG_CSR		(0x05 << 2) // Expansion CS
 | ||||||
|  | #define SYNQUACER_I2C_REG_FSR		(0x06 << 2) // Bus Clock Freq
 | ||||||
|  | #define SYNQUACER_I2C_REG_BC2R		(0x07 << 2) // Bus Control 2
 | ||||||
|  | 
 | ||||||
|  | /* I2C register bit definitions */ | ||||||
|  | #define SYNQUACER_I2C_BSR_FBT		BIT(0)	// First Byte Transfer
 | ||||||
|  | #define SYNQUACER_I2C_BSR_GCA		BIT(1)	// General Call Address
 | ||||||
|  | #define SYNQUACER_I2C_BSR_AAS		BIT(2)	// Address as Slave
 | ||||||
|  | #define SYNQUACER_I2C_BSR_TRX		BIT(3)	// Transfer/Receive
 | ||||||
|  | #define SYNQUACER_I2C_BSR_LRB		BIT(4)	// Last Received Bit
 | ||||||
|  | #define SYNQUACER_I2C_BSR_AL		BIT(5)	// Arbitration Lost
 | ||||||
|  | #define SYNQUACER_I2C_BSR_RSC		BIT(6)	// Repeated Start Cond.
 | ||||||
|  | #define SYNQUACER_I2C_BSR_BB		BIT(7)	// Bus Busy
 | ||||||
|  | 
 | ||||||
|  | #define SYNQUACER_I2C_BCR_INT		BIT(0)	// Interrupt
 | ||||||
|  | #define SYNQUACER_I2C_BCR_INTE		BIT(1)	// Interrupt Enable
 | ||||||
|  | #define SYNQUACER_I2C_BCR_GCAA		BIT(2)	// Gen. Call Access Ack.
 | ||||||
|  | #define SYNQUACER_I2C_BCR_ACK		BIT(3)	// Acknowledge
 | ||||||
|  | #define SYNQUACER_I2C_BCR_MSS		BIT(4)	// Master Slave Select
 | ||||||
|  | #define SYNQUACER_I2C_BCR_SCC		BIT(5)	// Start Condition Cont.
 | ||||||
|  | #define SYNQUACER_I2C_BCR_BEIE		BIT(6)	// Bus Error Int Enable
 | ||||||
|  | #define SYNQUACER_I2C_BCR_BER		BIT(7)	// Bus Error
 | ||||||
|  | 
 | ||||||
|  | #define SYNQUACER_I2C_CCR_CS_MASK	(0x1f)	// CCR Clock Period Sel.
 | ||||||
|  | #define SYNQUACER_I2C_CCR_EN		BIT(5)	// Enable
 | ||||||
|  | #define SYNQUACER_I2C_CCR_FM		BIT(6)	// Speed Mode Select
 | ||||||
|  | 
 | ||||||
|  | #define SYNQUACER_I2C_CSR_CS_MASK	(0x3f)	// CSR Clock Period Sel.
 | ||||||
|  | 
 | ||||||
|  | #define SYNQUACER_I2C_BC2R_SCLL		BIT(0)	// SCL Low Drive
 | ||||||
|  | #define SYNQUACER_I2C_BC2R_SDAL		BIT(1)	// SDA Low Drive
 | ||||||
|  | #define SYNQUACER_I2C_BC2R_SCLS		BIT(4)	// SCL Status
 | ||||||
|  | #define SYNQUACER_I2C_BC2R_SDAS		BIT(5)	// SDA Status
 | ||||||
|  | 
 | ||||||
|  | /* PCLK frequency */ | ||||||
|  | #define SYNQUACER_I2C_BUS_CLK_FR(rate)	(((rate) / 20000000) + 1) | ||||||
|  | 
 | ||||||
|  | /* STANDARD MODE frequency */ | ||||||
|  | #define SYNQUACER_I2C_CLK_MASTER_STD(rate)			\ | ||||||
|  | 	DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2) | ||||||
|  | /* FAST MODE frequency */ | ||||||
|  | #define SYNQUACER_I2C_CLK_MASTER_FAST(rate)			\ | ||||||
|  | 	DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3) | ||||||
|  | 
 | ||||||
|  | /* (clkrate <= 18000000) */ | ||||||
|  | /* calculate the value of CS bits in CCR register on standard mode */ | ||||||
|  | #define SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rate)			\ | ||||||
|  | 	   ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 65)		\ | ||||||
|  | 					& SYNQUACER_I2C_CCR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CSR register on standard mode */ | ||||||
|  | #define SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rate)		0x00 | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CCR register on fast mode */ | ||||||
|  | #define SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rate)			\ | ||||||
|  | 	   ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1)		\ | ||||||
|  | 					& SYNQUACER_I2C_CCR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CSR register on fast mode */ | ||||||
|  | #define SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rate)		0x00 | ||||||
|  | 
 | ||||||
|  | /* (clkrate > 18000000) */ | ||||||
|  | /* calculate the value of CS bits in CCR register on standard mode */ | ||||||
|  | #define SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rate)			\ | ||||||
|  | 	   ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1)		\ | ||||||
|  | 					& SYNQUACER_I2C_CCR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CSR register on standard mode */ | ||||||
|  | #define SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rate)			\ | ||||||
|  | 	   (((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) >> 5)	\ | ||||||
|  | 					& SYNQUACER_I2C_CSR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CCR register on fast mode */ | ||||||
|  | #define SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rate)			\ | ||||||
|  | 	   ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1)		\ | ||||||
|  | 					& SYNQUACER_I2C_CCR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* calculate the value of CS bits in CSR register on fast mode */ | ||||||
|  | #define SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rate)			\ | ||||||
|  | 	   (((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) >> 5)	\ | ||||||
|  | 					& SYNQUACER_I2C_CSR_CS_MASK) | ||||||
|  | 
 | ||||||
|  | /* min I2C clock frequency 14M */ | ||||||
|  | #define SYNQUACER_I2C_MIN_CLK_RATE	(14 * 1000000) | ||||||
|  | /* max I2C clock frequency 200M */ | ||||||
|  | #define SYNQUACER_I2C_MAX_CLK_RATE	(200 * 1000000) | ||||||
|  | /* I2C clock frequency 18M */ | ||||||
|  | #define SYNQUACER_I2C_CLK_RATE_18M	(18 * 1000000) | ||||||
|  | 
 | ||||||
|  | #define SYNQUACER_I2C_SPEED_FM		400	// Fast Mode
 | ||||||
|  | #define SYNQUACER_I2C_SPEED_SM		100	// Standard Mode
 | ||||||
|  | 
 | ||||||
|  | enum i2c_state { | ||||||
|  | 	STATE_IDLE, | ||||||
|  | 	STATE_START, | ||||||
|  | 	STATE_READ, | ||||||
|  | 	STATE_WRITE | ||||||
|  | }; | ||||||
|  | 
 | ||||||
|  | struct synquacer_i2c { | ||||||
|  | 	struct completion	completion; | ||||||
|  | 
 | ||||||
|  | 	struct i2c_msg		*msg; | ||||||
|  | 	u32			msg_num; | ||||||
|  | 	u32			msg_idx; | ||||||
|  | 	u32			msg_ptr; | ||||||
|  | 
 | ||||||
|  | 	int			irq; | ||||||
|  | 	struct device		*dev; | ||||||
|  | 	void __iomem		*base; | ||||||
|  | 	struct clk		*pclk; | ||||||
|  | 	u32			pclkrate; | ||||||
|  | 	u32			speed_khz; | ||||||
|  | 	u32			timeout_ms; | ||||||
|  | 	enum i2c_state		state; | ||||||
|  | 	struct i2c_adapter	adapter; | ||||||
|  | 
 | ||||||
|  | 	bool			is_suspended; | ||||||
|  | }; | ||||||
|  | 
 | ||||||
|  | static inline int is_lastmsg(struct synquacer_i2c *i2c) | ||||||
|  | { | ||||||
|  | 	return i2c->msg_idx >= (i2c->msg_num - 1); | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static inline int is_msglast(struct synquacer_i2c *i2c) | ||||||
|  | { | ||||||
|  | 	return i2c->msg_ptr == (i2c->msg->len - 1); | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static inline int is_msgend(struct synquacer_i2c *i2c) | ||||||
|  | { | ||||||
|  | 	return i2c->msg_ptr >= i2c->msg->len; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c, | ||||||
|  | 					    struct i2c_msg *msgs, | ||||||
|  | 					    int num) | ||||||
|  | { | ||||||
|  | 	unsigned long bit_count = 0; | ||||||
|  | 	int i; | ||||||
|  | 
 | ||||||
|  | 	for (i = 0; i < num; i++, msgs++) | ||||||
|  | 		bit_count += msgs->len; | ||||||
|  | 
 | ||||||
|  | 	return DIV_ROUND_UP((bit_count * 9 + num * 10) * 3, 200) + 10; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret) | ||||||
|  | { | ||||||
|  | 	/*
 | ||||||
|  | 	 * clear IRQ (INT=0, BER=0) | ||||||
|  | 	 * set Stop Condition (MSS=0) | ||||||
|  | 	 * Interrupt Disable | ||||||
|  | 	 */ | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 
 | ||||||
|  | 	i2c->state = STATE_IDLE; | ||||||
|  | 
 | ||||||
|  | 	i2c->msg_ptr = 0; | ||||||
|  | 	i2c->msg = NULL; | ||||||
|  | 	i2c->msg_idx++; | ||||||
|  | 	i2c->msg_num = 0; | ||||||
|  | 	if (ret) | ||||||
|  | 		i2c->msg_idx = ret; | ||||||
|  | 
 | ||||||
|  | 	complete(&i2c->completion); | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static void synquacer_i2c_hw_init(struct synquacer_i2c *i2c) | ||||||
|  | { | ||||||
|  | 	unsigned char ccr_cs, csr_cs; | ||||||
|  | 	u32 rt = i2c->pclkrate; | ||||||
|  | 
 | ||||||
|  | 	/* Set own Address */ | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_ADR); | ||||||
|  | 
 | ||||||
|  | 	/* Set PCLK frequency */ | ||||||
|  | 	writeb(SYNQUACER_I2C_BUS_CLK_FR(i2c->pclkrate), | ||||||
|  | 	       i2c->base + SYNQUACER_I2C_REG_FSR); | ||||||
|  | 
 | ||||||
|  | 	switch (i2c->speed_khz) { | ||||||
|  | 	case SYNQUACER_I2C_SPEED_FM: | ||||||
|  | 		if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) { | ||||||
|  | 			ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rt); | ||||||
|  | 			csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rt); | ||||||
|  | 		} else { | ||||||
|  | 			ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rt); | ||||||
|  | 			csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rt); | ||||||
|  | 		} | ||||||
|  | 
 | ||||||
|  | 		/* Set Clock and enable, Set fast mode */ | ||||||
|  | 		writeb(ccr_cs | SYNQUACER_I2C_CCR_FM | | ||||||
|  | 		       SYNQUACER_I2C_CCR_EN, | ||||||
|  | 		       i2c->base + SYNQUACER_I2C_REG_CCR); | ||||||
|  | 		writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR); | ||||||
|  | 		break; | ||||||
|  | 	case SYNQUACER_I2C_SPEED_SM: | ||||||
|  | 		if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) { | ||||||
|  | 			ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rt); | ||||||
|  | 			csr_cs = SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rt); | ||||||
|  | 		} else { | ||||||
|  | 			ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rt); | ||||||
|  | 			csr_cs = SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rt); | ||||||
|  | 		} | ||||||
|  | 
 | ||||||
|  | 		/* Set Clock and enable, Set standard mode */ | ||||||
|  | 		writeb(ccr_cs | SYNQUACER_I2C_CCR_EN, | ||||||
|  | 		      i2c->base + SYNQUACER_I2C_REG_CCR); | ||||||
|  | 		writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR); | ||||||
|  | 		break; | ||||||
|  | 	default: | ||||||
|  | 		WARN_ON(1); | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	/* clear IRQ (INT=0, BER=0), Interrupt Disable */ | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_BC2R); | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c) | ||||||
|  | { | ||||||
|  | 	/* Disable clock */ | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_CCR); | ||||||
|  | 	writeb(0, i2c->base + SYNQUACER_I2C_REG_CSR); | ||||||
|  | 
 | ||||||
|  | 	WAIT_PCLK(100, i2c->pclkrate); | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static int synquacer_i2c_master_start(struct synquacer_i2c *i2c, | ||||||
|  | 				      struct i2c_msg *pmsg) | ||||||
|  | { | ||||||
|  | 	unsigned char bsr, bcr; | ||||||
|  | 
 | ||||||
|  | 	writeb(i2c_8bit_addr_from_msg(pmsg), i2c->base + SYNQUACER_I2C_REG_DAR); | ||||||
|  | 
 | ||||||
|  | 	dev_dbg(i2c->dev, "slave:0x%02x\n", pmsg->addr); | ||||||
|  | 
 | ||||||
|  | 	/* Generate Start Condition */ | ||||||
|  | 	bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); | ||||||
|  | 	bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); | ||||||
|  | 
 | ||||||
|  | 	if ((bsr & SYNQUACER_I2C_BSR_BB) && | ||||||
|  | 	    !(bcr & SYNQUACER_I2C_BCR_MSS)) { | ||||||
|  | 		dev_dbg(i2c->dev, "bus is busy"); | ||||||
|  | 		return -EBUSY; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	if (bsr & SYNQUACER_I2C_BSR_BB) { /* Bus is busy */ | ||||||
|  | 		dev_dbg(i2c->dev, "Continuous Start"); | ||||||
|  | 		writeb(bcr | SYNQUACER_I2C_BCR_SCC, | ||||||
|  | 		       i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	} else { | ||||||
|  | 		if (bcr & SYNQUACER_I2C_BCR_MSS) { | ||||||
|  | 			dev_dbg(i2c->dev, "not in master mode"); | ||||||
|  | 			return -EAGAIN; | ||||||
|  | 		} | ||||||
|  | 		dev_dbg(i2c->dev, "Start Condition"); | ||||||
|  | 		/* Start Condition + Enable Interrupts */ | ||||||
|  | 		writeb(bcr | SYNQUACER_I2C_BCR_MSS | | ||||||
|  | 		       SYNQUACER_I2C_BCR_INTE | SYNQUACER_I2C_BCR_BEIE, | ||||||
|  | 		       i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	WAIT_PCLK(10, i2c->pclkrate); | ||||||
|  | 
 | ||||||
|  | 	/* get BSR & BCR registers */ | ||||||
|  | 	bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); | ||||||
|  | 	bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); | ||||||
|  | 
 | ||||||
|  | 	if ((bsr & SYNQUACER_I2C_BSR_AL) || | ||||||
|  | 	    !(bcr & SYNQUACER_I2C_BCR_MSS)) { | ||||||
|  | 		dev_dbg(i2c->dev, "arbitration lost\n"); | ||||||
|  | 		return -EAGAIN; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	return 0; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c, | ||||||
|  | 				struct i2c_msg *msgs, int num) | ||||||
|  | { | ||||||
|  | 	unsigned char bsr; | ||||||
|  | 	unsigned long timeout; | ||||||
|  | 	int ret; | ||||||
|  | 
 | ||||||
|  | 	if (i2c->is_suspended) | ||||||
|  | 		return -EBUSY; | ||||||
|  | 
 | ||||||
|  | 	synquacer_i2c_hw_init(i2c); | ||||||
|  | 	bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); | ||||||
|  | 	if (bsr & SYNQUACER_I2C_BSR_BB) { | ||||||
|  | 		dev_err(i2c->dev, "cannot get bus (bus busy)\n"); | ||||||
|  | 		return -EBUSY; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	reinit_completion(&i2c->completion); | ||||||
|  | 
 | ||||||
|  | 	i2c->msg = msgs; | ||||||
|  | 	i2c->msg_num = num; | ||||||
|  | 	i2c->msg_ptr = 0; | ||||||
|  | 	i2c->msg_idx = 0; | ||||||
|  | 	i2c->state = STATE_START; | ||||||
|  | 
 | ||||||
|  | 	ret = synquacer_i2c_master_start(i2c, i2c->msg); | ||||||
|  | 	if (ret < 0) { | ||||||
|  | 		dev_dbg(i2c->dev, "Address failed: (%d)\n", ret); | ||||||
|  | 		return ret; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	timeout = wait_for_completion_timeout(&i2c->completion, | ||||||
|  | 					msecs_to_jiffies(i2c->timeout_ms)); | ||||||
|  | 	if (timeout == 0) { | ||||||
|  | 		dev_dbg(i2c->dev, "timeout\n"); | ||||||
|  | 		return -EAGAIN; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	ret = i2c->msg_idx; | ||||||
|  | 	if (ret != num) { | ||||||
|  | 		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); | ||||||
|  | 		return -EAGAIN; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	/* wait 2 clock periods to ensure the stop has been through the bus */ | ||||||
|  | 	udelay(DIV_ROUND_UP(2 * 1000, i2c->speed_khz)); | ||||||
|  | 
 | ||||||
|  | 	return 0; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id) | ||||||
|  | { | ||||||
|  | 	struct synquacer_i2c *i2c = dev_id; | ||||||
|  | 
 | ||||||
|  | 	unsigned char byte; | ||||||
|  | 	unsigned char bsr, bcr; | ||||||
|  | 	int ret; | ||||||
|  | 
 | ||||||
|  | 	bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 	bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); | ||||||
|  | 	dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); | ||||||
|  | 
 | ||||||
|  | 	if (bcr & SYNQUACER_I2C_BCR_BER) { | ||||||
|  | 		dev_err(i2c->dev, "bus error\n"); | ||||||
|  | 		synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 		goto out; | ||||||
|  | 	} | ||||||
|  | 	if ((bsr & SYNQUACER_I2C_BSR_AL) || | ||||||
|  | 	    !(bcr & SYNQUACER_I2C_BCR_MSS)) { | ||||||
|  | 		dev_dbg(i2c->dev, "arbitration lost\n"); | ||||||
|  | 		synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 		goto out; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	switch (i2c->state) { | ||||||
|  | 	case STATE_START: | ||||||
|  | 		if (bsr & SYNQUACER_I2C_BSR_LRB) { | ||||||
|  | 			dev_dbg(i2c->dev, "ack was not received\n"); | ||||||
|  | 			synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 			goto out; | ||||||
|  | 		} | ||||||
|  | 
 | ||||||
|  | 		if (i2c->msg->flags & I2C_M_RD) | ||||||
|  | 			i2c->state = STATE_READ; | ||||||
|  | 		else | ||||||
|  | 			i2c->state = STATE_WRITE; | ||||||
|  | 
 | ||||||
|  | 		if (is_lastmsg(i2c) && i2c->msg->len == 0) { | ||||||
|  | 			synquacer_i2c_stop(i2c, 0); | ||||||
|  | 			goto out; | ||||||
|  | 		} | ||||||
|  | 
 | ||||||
|  | 		if (i2c->state == STATE_READ) | ||||||
|  | 			goto prepare_read; | ||||||
|  | 
 | ||||||
|  | 		/* fallthru */ | ||||||
|  | 
 | ||||||
|  | 	case STATE_WRITE: | ||||||
|  | 		if (bsr & SYNQUACER_I2C_BSR_LRB) { | ||||||
|  | 			dev_dbg(i2c->dev, "WRITE: No Ack\n"); | ||||||
|  | 			synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 			goto out; | ||||||
|  | 		} | ||||||
|  | 
 | ||||||
|  | 		if (!is_msgend(i2c)) { | ||||||
|  | 			writeb(i2c->msg->buf[i2c->msg_ptr++], | ||||||
|  | 			       i2c->base + SYNQUACER_I2C_REG_DAR); | ||||||
|  | 
 | ||||||
|  | 			/* clear IRQ, and continue */ | ||||||
|  | 			writeb(SYNQUACER_I2C_BCR_BEIE | | ||||||
|  | 			       SYNQUACER_I2C_BCR_MSS | | ||||||
|  | 			       SYNQUACER_I2C_BCR_INTE, | ||||||
|  | 			       i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		if (is_lastmsg(i2c)) { | ||||||
|  | 			synquacer_i2c_stop(i2c, 0); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		dev_dbg(i2c->dev, "WRITE: Next Message\n"); | ||||||
|  | 
 | ||||||
|  | 		i2c->msg_ptr = 0; | ||||||
|  | 		i2c->msg_idx++; | ||||||
|  | 		i2c->msg++; | ||||||
|  | 
 | ||||||
|  | 		/* send the new start */ | ||||||
|  | 		ret = synquacer_i2c_master_start(i2c, i2c->msg); | ||||||
|  | 		if (ret < 0) { | ||||||
|  | 			dev_dbg(i2c->dev, "restart error (%d)\n", ret); | ||||||
|  | 			synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		i2c->state = STATE_START; | ||||||
|  | 		break; | ||||||
|  | 
 | ||||||
|  | 	case STATE_READ: | ||||||
|  | 		byte = readb(i2c->base + SYNQUACER_I2C_REG_DAR); | ||||||
|  | 		if (!(bsr & SYNQUACER_I2C_BSR_FBT)) /* data */ | ||||||
|  | 			i2c->msg->buf[i2c->msg_ptr++] = byte; | ||||||
|  | 		else /* address */ | ||||||
|  | 			dev_dbg(i2c->dev, "address:0x%02x. ignore it.\n", byte); | ||||||
|  | 
 | ||||||
|  | prepare_read: | ||||||
|  | 		if (is_msglast(i2c)) { | ||||||
|  | 			writeb(SYNQUACER_I2C_BCR_MSS | | ||||||
|  | 			       SYNQUACER_I2C_BCR_BEIE | | ||||||
|  | 			       SYNQUACER_I2C_BCR_INTE, | ||||||
|  | 			       i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		if (!is_msgend(i2c)) { | ||||||
|  | 			writeb(SYNQUACER_I2C_BCR_MSS | | ||||||
|  | 			       SYNQUACER_I2C_BCR_BEIE | | ||||||
|  | 			       SYNQUACER_I2C_BCR_INTE | | ||||||
|  | 			       SYNQUACER_I2C_BCR_ACK, | ||||||
|  | 			       i2c->base + SYNQUACER_I2C_REG_BCR); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		if (is_lastmsg(i2c)) { | ||||||
|  | 			/* last message, send stop and complete */ | ||||||
|  | 			dev_dbg(i2c->dev, "READ: Send Stop\n"); | ||||||
|  | 			synquacer_i2c_stop(i2c, 0); | ||||||
|  | 			break; | ||||||
|  | 		} | ||||||
|  | 		dev_dbg(i2c->dev, "READ: Next Transfer\n"); | ||||||
|  | 
 | ||||||
|  | 		i2c->msg_ptr = 0; | ||||||
|  | 		i2c->msg_idx++; | ||||||
|  | 		i2c->msg++; | ||||||
|  | 
 | ||||||
|  | 		ret = synquacer_i2c_master_start(i2c, i2c->msg); | ||||||
|  | 		if (ret < 0) { | ||||||
|  | 			dev_dbg(i2c->dev, "restart error (%d)\n", ret); | ||||||
|  | 			synquacer_i2c_stop(i2c, -EAGAIN); | ||||||
|  | 		} else { | ||||||
|  | 			i2c->state = STATE_START; | ||||||
|  | 		} | ||||||
|  | 		break; | ||||||
|  | 	default: | ||||||
|  | 		dev_err(i2c->dev, "called in err STATE (%d)\n", i2c->state); | ||||||
|  | 		break; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | out: | ||||||
|  | 	WAIT_PCLK(10, i2c->pclkrate); | ||||||
|  | 	return IRQ_HANDLED; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, | ||||||
|  | 			      int num) | ||||||
|  | { | ||||||
|  | 	struct synquacer_i2c *i2c; | ||||||
|  | 	int retry; | ||||||
|  | 	int ret; | ||||||
|  | 
 | ||||||
|  | 	i2c = i2c_get_adapdata(adap); | ||||||
|  | 	i2c->timeout_ms = calc_timeout_ms(i2c, msgs, num); | ||||||
|  | 
 | ||||||
|  | 	dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms); | ||||||
|  | 
 | ||||||
|  | 	for (retry = 0; retry < adap->retries; retry++) { | ||||||
|  | 		ret = synquacer_i2c_doxfer(i2c, msgs, num); | ||||||
|  | 		if (ret != -EAGAIN) | ||||||
|  | 			return ret; | ||||||
|  | 
 | ||||||
|  | 		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); | ||||||
|  | 
 | ||||||
|  | 		synquacer_i2c_hw_reset(i2c); | ||||||
|  | 	} | ||||||
|  | 	return -EIO; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static u32 synquacer_i2c_functionality(struct i2c_adapter *adap) | ||||||
|  | { | ||||||
|  | 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static const struct i2c_algorithm synquacer_i2c_algo = { | ||||||
|  | 	.master_xfer	= synquacer_i2c_xfer, | ||||||
|  | 	.functionality	= synquacer_i2c_functionality, | ||||||
|  | }; | ||||||
|  | 
 | ||||||
|  | static struct i2c_adapter synquacer_i2c_ops = { | ||||||
|  | 	.owner		= THIS_MODULE, | ||||||
|  | 	.name		= "synquacer_i2c-adapter", | ||||||
|  | 	.algo		= &synquacer_i2c_algo, | ||||||
|  | 	.retries	= 5, | ||||||
|  | }; | ||||||
|  | 
 | ||||||
|  | static int synquacer_i2c_probe(struct platform_device *pdev) | ||||||
|  | { | ||||||
|  | 	struct synquacer_i2c *i2c; | ||||||
|  | 	struct resource *r; | ||||||
|  | 	u32 bus_speed; | ||||||
|  | 	int ret; | ||||||
|  | 
 | ||||||
|  | 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); | ||||||
|  | 	if (!i2c) | ||||||
|  | 		return -ENOMEM; | ||||||
|  | 
 | ||||||
|  | 	bus_speed = i2c_acpi_find_bus_speed(&pdev->dev); | ||||||
|  | 	if (!bus_speed) | ||||||
|  | 		device_property_read_u32(&pdev->dev, "clock-frequency", | ||||||
|  | 					 &bus_speed); | ||||||
|  | 
 | ||||||
|  | 	device_property_read_u32(&pdev->dev, "socionext,pclk-rate", | ||||||
|  | 				 &i2c->pclkrate); | ||||||
|  | 
 | ||||||
|  | 	i2c->pclk = devm_clk_get(&pdev->dev, "pclk"); | ||||||
|  | 	if (IS_ERR(i2c->pclk) && PTR_ERR(i2c->pclk) == -EPROBE_DEFER) | ||||||
|  | 		return -EPROBE_DEFER; | ||||||
|  | 	if (!IS_ERR_OR_NULL(i2c->pclk)) { | ||||||
|  | 		dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk); | ||||||
|  | 
 | ||||||
|  | 		ret = clk_prepare_enable(i2c->pclk); | ||||||
|  | 		if (ret) { | ||||||
|  | 			dev_err(&pdev->dev, "failed to enable clock (%d)\n", | ||||||
|  | 				ret); | ||||||
|  | 			return ret; | ||||||
|  | 		} | ||||||
|  | 		i2c->pclkrate = clk_get_rate(i2c->pclk); | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE || | ||||||
|  | 	    i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) { | ||||||
|  | 		dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n", | ||||||
|  | 			i2c->pclkrate); | ||||||
|  | 		return -EINVAL; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||||||
|  | 	i2c->base = devm_ioremap_resource(&pdev->dev, r); | ||||||
|  | 	if (IS_ERR(i2c->base)) | ||||||
|  | 		return PTR_ERR(i2c->base); | ||||||
|  | 
 | ||||||
|  | 	i2c->irq = platform_get_irq(pdev, 0); | ||||||
|  | 	if (i2c->irq < 0) { | ||||||
|  | 		dev_err(&pdev->dev, "no IRQ resource found\n"); | ||||||
|  | 		return -ENODEV; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr, | ||||||
|  | 			       0, dev_name(&pdev->dev), i2c); | ||||||
|  | 	if (ret < 0) { | ||||||
|  | 		dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); | ||||||
|  | 		return ret; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	i2c->state = STATE_IDLE; | ||||||
|  | 	i2c->dev = &pdev->dev; | ||||||
|  | 	i2c->adapter = synquacer_i2c_ops; | ||||||
|  | 	i2c_set_adapdata(&i2c->adapter, i2c); | ||||||
|  | 	i2c->adapter.dev.parent = &pdev->dev; | ||||||
|  | 	i2c->adapter.nr = pdev->id; | ||||||
|  | 	init_completion(&i2c->completion); | ||||||
|  | 
 | ||||||
|  | 	if (bus_speed < 400000) | ||||||
|  | 		i2c->speed_khz = SYNQUACER_I2C_SPEED_SM; | ||||||
|  | 	else | ||||||
|  | 		i2c->speed_khz = SYNQUACER_I2C_SPEED_FM; | ||||||
|  | 
 | ||||||
|  | 	synquacer_i2c_hw_init(i2c); | ||||||
|  | 
 | ||||||
|  | 	ret = i2c_add_numbered_adapter(&i2c->adapter); | ||||||
|  | 	if (ret) { | ||||||
|  | 		dev_err(&pdev->dev, "failed to add bus to i2c core\n"); | ||||||
|  | 		return ret; | ||||||
|  | 	} | ||||||
|  | 
 | ||||||
|  | 	platform_set_drvdata(pdev, i2c); | ||||||
|  | 
 | ||||||
|  | 	dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n", | ||||||
|  | 		 dev_name(&i2c->adapter.dev)); | ||||||
|  | 
 | ||||||
|  | 	return 0; | ||||||
|  | } | ||||||
|  | 
 | ||||||
|  | static int synquacer_i2c_remove(struct platform_device *pdev) | ||||||
|  | { | ||||||
|  | 	struct synquacer_i2c *i2c = platform_get_drvdata(pdev); | ||||||
|  | 
 | ||||||
|  | 	i2c_del_adapter(&i2c->adapter); | ||||||
|  | 	if (!IS_ERR(i2c->pclk)) | ||||||
|  | 		clk_disable_unprepare(i2c->pclk); | ||||||
|  | 
 | ||||||
|  | 	return 0; | ||||||
|  | }; | ||||||
|  | 
 | ||||||
|  | static const struct of_device_id synquacer_i2c_dt_ids[] = { | ||||||
|  | 	{ .compatible = "socionext,synquacer-i2c" }, | ||||||
|  | 	{ /* sentinel */ } | ||||||
|  | }; | ||||||
|  | MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids); | ||||||
|  | 
 | ||||||
|  | #ifdef CONFIG_ACPI | ||||||
|  | static const struct acpi_device_id synquacer_i2c_acpi_ids[] = { | ||||||
|  | 	{ "SCX0003" }, | ||||||
|  | 	{ /* sentinel */ } | ||||||
|  | }; | ||||||
|  | MODULE_DEVICE_TABLE(acpi, synquacer_i2c_acpi_ids); | ||||||
|  | #endif | ||||||
|  | 
 | ||||||
|  | static struct platform_driver synquacer_i2c_driver = { | ||||||
|  | 	.probe	= synquacer_i2c_probe, | ||||||
|  | 	.remove	= synquacer_i2c_remove, | ||||||
|  | 	.driver	= { | ||||||
|  | 		.name = "synquacer_i2c", | ||||||
|  | 		.of_match_table = of_match_ptr(synquacer_i2c_dt_ids), | ||||||
|  | 		.acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids), | ||||||
|  | 	}, | ||||||
|  | }; | ||||||
|  | module_platform_driver(synquacer_i2c_driver); | ||||||
|  | 
 | ||||||
|  | MODULE_AUTHOR("Fujitsu Semiconductor Ltd"); | ||||||
|  | MODULE_DESCRIPTION("Socionext SynQuacer I2C Driver"); | ||||||
|  | MODULE_LICENSE("GPL v2"); | ||||||
		Loading…
	
		Reference in a new issue
	
	 Ard Biesheuvel
						Ard Biesheuvel