percpu: align percpu readmostly subsection to cacheline

Currently percpu readmostly subsection may share cachelines with other
percpu subsections which may result in unnecessary cacheline bounce
and performance degradation.

This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR()
linker macros, makes each arch linker scripts specify its cacheline
size and use it to align percpu subsections.

This is based on Shaohua's x86 only patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shaohua.li@intel.com>

arch/alpha/kernel/vmlinux.lds.S

@@ -38,7 +38,7 @@ SECTIONS
 	__init_begin = ALIGN(PAGE_SIZE);
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
-	PERCPU(PAGE_SIZE)
+	PERCPU(64, PAGE_SIZE)
 	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
 	   needed for the THREAD_SIZE aligned init_task gets freed after init */
 	. = ALIGN(THREAD_SIZE);

arch/arm/kernel/vmlinux.lds.S

@@ -70,7 +70,7 @@ SECTIONS
 #endif
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(32, PAGE_SIZE)
 
 #ifndef CONFIG_XIP_KERNEL
 	. = ALIGN(PAGE_SIZE);

arch/blackfin/kernel/vmlinux.lds.S

@@ -136,7 +136,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	INIT_DATA_SECTION(16)
-	PERCPU(4)
+	PERCPU(32, 4)
 
 	.exit.data :
 	{

arch/cris/kernel/vmlinux.lds.S

@@ -107,7 +107,7 @@ SECTIONS
 #endif
 	__vmlinux_end = .;		/* Last address of the physical file. */
 #ifdef CONFIG_ETRAX_ARCH_V32
-	PERCPU(PAGE_SIZE)
+	PERCPU(32, PAGE_SIZE)
 
 	.init.ramfs : {
 		INIT_RAM_FS

arch/frv/kernel/vmlinux.lds.S

@@ -37,7 +37,7 @@ SECTIONS
   _einittext = .;
 
   INIT_DATA_SECTION(8)
-  PERCPU(4096)
+  PERCPU(L1_CACHE_BYTES, 4096)
 
   . = ALIGN(PAGE_SIZE);
   __init_end = .;

arch/ia64/kernel/vmlinux.lds.S

@@ -198,7 +198,7 @@ SECTIONS {
 
 	/* Per-cpu data: */
 	. = ALIGN(PERCPU_PAGE_SIZE);
-	PERCPU_VADDR(PERCPU_ADDR, :percpu)
+	PERCPU_VADDR(SMP_CACHE_BYTES, PERCPU_ADDR, :percpu)
 	__phys_per_cpu_start = __per_cpu_load;
 	/*
 	 * ensure percpu data fits

arch/m32r/kernel/vmlinux.lds.S

@@ -53,7 +53,7 @@ SECTIONS
   __init_begin = .;
   INIT_TEXT_SECTION(PAGE_SIZE)
   INIT_DATA_SECTION(16)
-  PERCPU(PAGE_SIZE)
+  PERCPU(32, PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */

arch/mips/kernel/vmlinux.lds.S

@@ -115,7 +115,7 @@ SECTIONS
 		EXIT_DATA
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(1 << CONFIG_MIPS_L1_CACHE_SHIFT, PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */

arch/mn10300/kernel/vmlinux.lds.S

@@ -70,7 +70,7 @@ SECTIONS
 	.exit.text : { EXIT_TEXT; }
 	.exit.data : { EXIT_DATA; }
 
-  PERCPU(PAGE_SIZE)
+  PERCPU(32, PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */

arch/parisc/kernel/vmlinux.lds.S

@@ -145,7 +145,7 @@ SECTIONS
 		EXIT_DATA
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */

arch/powerpc/kernel/vmlinux.lds.S

@@ -160,7 +160,7 @@ SECTIONS
 		INIT_RAM_FS
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
 
 	. = ALIGN(8);
 	.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {

arch/s390/kernel/vmlinux.lds.S

@@ -77,7 +77,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	INIT_DATA_SECTION(0x100)
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(0x100, PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;		/* freed after init ends here */
 

arch/sh/kernel/vmlinux.lds.S

@@ -66,7 +66,7 @@ SECTIONS
 		__machvec_end = .;
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
 
 	/*
 	 * .exit.text is discarded at runtime, not link time, to deal with

arch/sparc/kernel/vmlinux.lds.S

@@ -108,7 +108,7 @@ SECTIONS
 		__sun4v_2insn_patch_end = .;
 	}
 
-	PERCPU(PAGE_SIZE)
+	PERCPU(SMP_CACHE_BYTES, PAGE_SIZE)
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;

arch/tile/kernel/vmlinux.lds.S

@@ -63,7 +63,7 @@ SECTIONS
     *(.init.page)
   } :data =0
   INIT_DATA_SECTION(16)
-  PERCPU(PAGE_SIZE)
+  PERCPU(L2_CACHE_BYTES, PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
   VMLINUX_SYMBOL(_einitdata) = .;
 

arch/um/include/asm/common.lds.S

@@ -42,7 +42,7 @@
 	INIT_SETUP(0)
   }
 
-  PERCPU(32)
+  PERCPU(32, 32)
 	
   .initcall.init : {
 	INIT_CALLS

arch/x86/kernel/vmlinux.lds.S

@@ -230,7 +230,7 @@ SECTIONS
 	 * output PHDR, so the next output section - .init.text - should
 	 * start another segment - init.
 	 */
-	PERCPU_VADDR(0, :percpu)
+	PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
 #endif
 
 	INIT_TEXT_SECTION(PAGE_SIZE)
@@ -305,7 +305,7 @@ SECTIONS
 	}
 
 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
-	PERCPU(THREAD_SIZE)
+	PERCPU(INTERNODE_CACHE_BYTES, THREAD_SIZE)
 #endif
 
 	. = ALIGN(PAGE_SIZE);

arch/xtensa/kernel/vmlinux.lds.S

@@ -155,7 +155,7 @@ SECTIONS
     INIT_RAM_FS
   }
 
-  PERCPU(PAGE_SIZE)
+  PERCPU(XCHAL_ICACHE_LINESIZE, PAGE_SIZE)
 
   /* We need this dummy segment here */
 

include/asm-generic/vmlinux.lds.h

@@ -15,7 +15,7 @@
  *	HEAD_TEXT_SECTION
  *	INIT_TEXT_SECTION(PAGE_SIZE)
  *	INIT_DATA_SECTION(...)
- *	PERCPU(PAGE_SIZE)
+ *	PERCPU(CACHELINE_SIZE, PAGE_SIZE)
  *	__init_end = .;
  *
  *	_stext = .;
@@ -683,13 +683,18 @@
 
 /**
  * PERCPU_VADDR - define output section for percpu area
+ * @cacheline: cacheline size
  * @vaddr: explicit base address (optional)
  * @phdr: destination PHDR (optional)
  *
- * Macro which expands to output section for percpu area.  If @vaddr
+ * Macro which expands to output section for percpu area.
- * is not blank, it specifies explicit base address and all percpu
+ *
- * symbols will be offset from the given address.  If blank, @vaddr
+ * @cacheline is used to align subsections to avoid false cacheline
- * always equals @laddr + LOAD_OFFSET.
+ * sharing between subsections for different purposes.
+ *
+ * If @vaddr is not blank, it specifies explicit base address and all
+ * percpu symbols will be offset from the given address.  If blank,
+ * @vaddr always equals @laddr + LOAD_OFFSET.
  *
  * @phdr defines the output PHDR to use if not blank.  Be warned that
  * output PHDR is sticky.  If @phdr is specified, the next output
@@ -700,7 +705,7 @@
  * If there is no need to put the percpu section at a predetermined
  * address, use PERCPU().
  */
-#define PERCPU_VADDR(vaddr, phdr)					\
+#define PERCPU_VADDR(cacheline, vaddr, phdr)				\
 	VMLINUX_SYMBOL(__per_cpu_load) = .;				\
 	.data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load)		\
 				- LOAD_OFFSET) {			\
@@ -708,7 +713,9 @@
 		*(.data..percpu..first)					\
 		. = ALIGN(PAGE_SIZE);					\
 		*(.data..percpu..page_aligned)				\
+		. = ALIGN(cacheline);					\
 		*(.data..percpu..readmostly)				\
+		. = ALIGN(cacheline);					\
 		*(.data..percpu)					\
 		*(.data..percpu..shared_aligned)			\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\
@@ -717,18 +724,18 @@
 
 /**
  * PERCPU - define output section for percpu area, simple version
+ * @cacheline: cacheline size
  * @align: required alignment
  *
- * Align to @align and outputs output section for percpu area.  This
+ * Align to @align and outputs output section for percpu area.  This macro
- * macro doesn't maniuplate @vaddr or @phdr and __per_cpu_load and
+ * doesn't manipulate @vaddr or @phdr and __per_cpu_load and
  * __per_cpu_start will be identical.
  *
- * This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
+ * This macro is equivalent to ALIGN(@align); PERCPU_VADDR(@cacheline,,)
- * that __per_cpu_load is defined as a relative symbol against
+ * except that __per_cpu_load is defined as a relative symbol against
- * .data..percpu which is required for relocatable x86_32
+ * .data..percpu which is required for relocatable x86_32 configuration.
- * configuration.
  */
-#define PERCPU(align)							\
+#define PERCPU(cacheline, align)					\
 	. = ALIGN(align);						\
 	.data..percpu	: AT(ADDR(.data..percpu) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__per_cpu_load) = .;			\
@@ -736,7 +743,9 @@
 		*(.data..percpu..first)					\
 		. = ALIGN(PAGE_SIZE);					\
 		*(.data..percpu..page_aligned)				\
+		. = ALIGN(cacheline);					\
 		*(.data..percpu..readmostly)				\
+		. = ALIGN(cacheline);					\
 		*(.data..percpu)					\
 		*(.data..percpu..shared_aligned)			\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\