forked from mirrors/linux
drm/panel: Add driver for the Toppoly TD028TTEC1 panel
This panel is used on the OpenMoko Neo FreeRunner and Neo 1973. The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver. v2: - fix checkpatch warnings: o (lcd == NULL) => (!lcd) (sam) o (1 << X) => BIT(X) (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-9-laurent.pinchart@ideasonboard.com
This commit is contained in:
Laurent Pinchart
Sam Ravnborg
parent
1c8fc3f0c5
commit
415b8dd087
4 changed files with 413 additions and 5 deletions
|
|
@ -324,6 +324,14 @@ config DRM_PANEL_SONY_ACX565AKM
|
|||
Say Y here if you want to enable support for the Sony ACX565AKM
|
||||
800x600 3.5" panel (found on the Nokia N900).
|
||||
|
||||
config DRM_PANEL_TPO_TD028TTEC1
|
||||
tristate "Toppoly (TPO) TD028TTEC1 panel driver"
|
||||
depends on OF && SPI
|
||||
depends on BACKLIGHT_CLASS_DEVICE
|
||||
help
|
||||
Say Y here if you want to enable support for TPO TD028TTEC1 480x640
|
||||
2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
|
||||
|
||||
config DRM_PANEL_TPO_TPG110
|
||||
tristate "TPO TPG 800x400 panel"
|
||||
depends on OF && SPI && GPIOLIB
|
||||
|
|
|
|||
|
|
@ -34,5 +34,6 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
|
|||
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
|
||||
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
|
||||
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
|
||||
obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
|
||||
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
|
||||
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
|
||||
|
|
|
|||
|
|
@ -31,10 +31,10 @@
|
|||
#include <drm/drm_modes.h>
|
||||
#include <drm/drm_panel.h>
|
||||
|
||||
#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
|
||||
#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
|
||||
#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
|
||||
#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
|
||||
#define CTRL_DISP_BRIGHTNESS_CTRL_ON BIT(5)
|
||||
#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON BIT(4)
|
||||
#define CTRL_DISP_BACKLIGHT_ON BIT(2)
|
||||
#define CTRL_DISP_AUTO_BRIGHTNESS_ON BIT(1)
|
||||
|
||||
#define MIPID_CMD_WRITE_CABC 0x55
|
||||
#define MIPID_CMD_READ_CABC 0x56
|
||||
|
|
@ -621,7 +621,7 @@ static int acx565akm_probe(struct spi_device *spi)
|
|||
int ret;
|
||||
|
||||
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
||||
if (lcd == NULL)
|
||||
if (!lcd)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_drvdata(spi, lcd);
|
||||
|
|
|
|||
399
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
Normal file
399
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
Normal file
|
|
@ -0,0 +1,399 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Toppoly TD028TTEC1 Panel Driver
|
||||
*
|
||||
* Copyright (C) 2019 Texas Instruments Incorporated
|
||||
*
|
||||
* Based on the omapdrm-specific panel-tpo-td028ttec1 driver
|
||||
*
|
||||
* Copyright (C) 2008 Nokia Corporation
|
||||
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
||||
*
|
||||
* Neo 1973 code (jbt6k74.c):
|
||||
* Copyright (C) 2006-2007 OpenMoko, Inc.
|
||||
* Author: Harald Welte <laforge@openmoko.org>
|
||||
*
|
||||
* Ported and adapted from Neo 1973 U-Boot by:
|
||||
* H. Nikolaus Schaller <hns@goldelico.com>
|
||||
*/
|
||||
|
||||
#include <linux/backlight.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <drm/drm_connector.h>
|
||||
#include <drm/drm_modes.h>
|
||||
#include <drm/drm_panel.h>
|
||||
|
||||
#define JBT_COMMAND 0x000
|
||||
#define JBT_DATA 0x100
|
||||
|
||||
#define JBT_REG_SLEEP_IN 0x10
|
||||
#define JBT_REG_SLEEP_OUT 0x11
|
||||
|
||||
#define JBT_REG_DISPLAY_OFF 0x28
|
||||
#define JBT_REG_DISPLAY_ON 0x29
|
||||
|
||||
#define JBT_REG_RGB_FORMAT 0x3a
|
||||
#define JBT_REG_QUAD_RATE 0x3b
|
||||
|
||||
#define JBT_REG_POWER_ON_OFF 0xb0
|
||||
#define JBT_REG_BOOSTER_OP 0xb1
|
||||
#define JBT_REG_BOOSTER_MODE 0xb2
|
||||
#define JBT_REG_BOOSTER_FREQ 0xb3
|
||||
#define JBT_REG_OPAMP_SYSCLK 0xb4
|
||||
#define JBT_REG_VSC_VOLTAGE 0xb5
|
||||
#define JBT_REG_VCOM_VOLTAGE 0xb6
|
||||
#define JBT_REG_EXT_DISPL 0xb7
|
||||
#define JBT_REG_OUTPUT_CONTROL 0xb8
|
||||
#define JBT_REG_DCCLK_DCEV 0xb9
|
||||
#define JBT_REG_DISPLAY_MODE1 0xba
|
||||
#define JBT_REG_DISPLAY_MODE2 0xbb
|
||||
#define JBT_REG_DISPLAY_MODE 0xbc
|
||||
#define JBT_REG_ASW_SLEW 0xbd
|
||||
#define JBT_REG_DUMMY_DISPLAY 0xbe
|
||||
#define JBT_REG_DRIVE_SYSTEM 0xbf
|
||||
|
||||
#define JBT_REG_SLEEP_OUT_FR_A 0xc0
|
||||
#define JBT_REG_SLEEP_OUT_FR_B 0xc1
|
||||
#define JBT_REG_SLEEP_OUT_FR_C 0xc2
|
||||
#define JBT_REG_SLEEP_IN_LCCNT_D 0xc3
|
||||
#define JBT_REG_SLEEP_IN_LCCNT_E 0xc4
|
||||
#define JBT_REG_SLEEP_IN_LCCNT_F 0xc5
|
||||
#define JBT_REG_SLEEP_IN_LCCNT_G 0xc6
|
||||
|
||||
#define JBT_REG_GAMMA1_FINE_1 0xc7
|
||||
#define JBT_REG_GAMMA1_FINE_2 0xc8
|
||||
#define JBT_REG_GAMMA1_INCLINATION 0xc9
|
||||
#define JBT_REG_GAMMA1_BLUE_OFFSET 0xca
|
||||
|
||||
#define JBT_REG_BLANK_CONTROL 0xcf
|
||||
#define JBT_REG_BLANK_TH_TV 0xd0
|
||||
#define JBT_REG_CKV_ON_OFF 0xd1
|
||||
#define JBT_REG_CKV_1_2 0xd2
|
||||
#define JBT_REG_OEV_TIMING 0xd3
|
||||
#define JBT_REG_ASW_TIMING_1 0xd4
|
||||
#define JBT_REG_ASW_TIMING_2 0xd5
|
||||
|
||||
#define JBT_REG_HCLOCK_VGA 0xec
|
||||
#define JBT_REG_HCLOCK_QVGA 0xed
|
||||
|
||||
struct td028ttec1_panel {
|
||||
struct drm_panel panel;
|
||||
|
||||
struct spi_device *spi;
|
||||
struct backlight_device *backlight;
|
||||
};
|
||||
|
||||
#define to_td028ttec1_device(p) container_of(p, struct td028ttec1_panel, panel)
|
||||
|
||||
static int jbt_ret_write_0(struct td028ttec1_panel *lcd, u8 reg, int *err)
|
||||
{
|
||||
struct spi_device *spi = lcd->spi;
|
||||
u16 tx_buf = JBT_COMMAND | reg;
|
||||
int ret;
|
||||
|
||||
if (err && *err)
|
||||
return *err;
|
||||
|
||||
ret = spi_write(spi, (u8 *)&tx_buf, sizeof(tx_buf));
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
|
||||
if (err)
|
||||
*err = ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jbt_reg_write_1(struct td028ttec1_panel *lcd,
|
||||
u8 reg, u8 data, int *err)
|
||||
{
|
||||
struct spi_device *spi = lcd->spi;
|
||||
u16 tx_buf[2];
|
||||
int ret;
|
||||
|
||||
if (err && *err)
|
||||
return *err;
|
||||
|
||||
tx_buf[0] = JBT_COMMAND | reg;
|
||||
tx_buf[1] = JBT_DATA | data;
|
||||
|
||||
ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
|
||||
if (err)
|
||||
*err = ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jbt_reg_write_2(struct td028ttec1_panel *lcd,
|
||||
u8 reg, u16 data, int *err)
|
||||
{
|
||||
struct spi_device *spi = lcd->spi;
|
||||
u16 tx_buf[3];
|
||||
int ret;
|
||||
|
||||
if (err && *err)
|
||||
return *err;
|
||||
|
||||
tx_buf[0] = JBT_COMMAND | reg;
|
||||
tx_buf[1] = JBT_DATA | (data >> 8);
|
||||
tx_buf[2] = JBT_DATA | (data & 0xff);
|
||||
|
||||
ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
|
||||
if (err)
|
||||
*err = ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int td028ttec1_prepare(struct drm_panel *panel)
|
||||
{
|
||||
struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
|
||||
unsigned int i;
|
||||
int ret = 0;
|
||||
|
||||
/* Three times command zero */
|
||||
for (i = 0; i < 3; ++i) {
|
||||
jbt_ret_write_0(lcd, 0x00, &ret);
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
|
||||
/* deep standby out */
|
||||
jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x17, &ret);
|
||||
|
||||
/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
|
||||
jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE, 0x80, &ret);
|
||||
|
||||
/* Quad mode off */
|
||||
jbt_reg_write_1(lcd, JBT_REG_QUAD_RATE, 0x00, &ret);
|
||||
|
||||
/* AVDD on, XVDD on */
|
||||
jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x16, &ret);
|
||||
|
||||
/* Output control */
|
||||
jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0xfff9, &ret);
|
||||
|
||||
/* Sleep mode off */
|
||||
jbt_ret_write_0(lcd, JBT_REG_SLEEP_OUT, &ret);
|
||||
|
||||
/* at this point we have like 50% grey */
|
||||
|
||||
/* initialize register set */
|
||||
jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE1, 0x01, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE2, 0x00, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_RGB_FORMAT, 0x60, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_DRIVE_SYSTEM, 0x10, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_BOOSTER_OP, 0x56, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_BOOSTER_MODE, 0x33, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_OPAMP_SYSCLK, 0x02, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_VSC_VOLTAGE, 0x2b, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_VCOM_VOLTAGE, 0x40, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_EXT_DISPL, 0x03, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_DCCLK_DCEV, 0x04, &ret);
|
||||
/*
|
||||
* default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
|
||||
* to avoid red / blue flicker
|
||||
*/
|
||||
jbt_reg_write_1(lcd, JBT_REG_ASW_SLEW, 0x04, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_DUMMY_DISPLAY, 0x00, &ret);
|
||||
|
||||
jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_A, 0x11, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_B, 0x11, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_C, 0x11, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0, &ret);
|
||||
|
||||
jbt_reg_write_2(lcd, JBT_REG_GAMMA1_FINE_1, 0x5533, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_GAMMA1_FINE_2, 0x00, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_GAMMA1_INCLINATION, 0x00, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00, &ret);
|
||||
|
||||
jbt_reg_write_2(lcd, JBT_REG_HCLOCK_VGA, 0x1f0, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_BLANK_CONTROL, 0x02, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_BLANK_TH_TV, 0x0804, &ret);
|
||||
|
||||
jbt_reg_write_1(lcd, JBT_REG_CKV_ON_OFF, 0x01, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_CKV_1_2, 0x0000, &ret);
|
||||
|
||||
jbt_reg_write_2(lcd, JBT_REG_OEV_TIMING, 0x0d0e, &ret);
|
||||
jbt_reg_write_2(lcd, JBT_REG_ASW_TIMING_1, 0x11a4, &ret);
|
||||
jbt_reg_write_1(lcd, JBT_REG_ASW_TIMING_2, 0x0e, &ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int td028ttec1_enable(struct drm_panel *panel)
|
||||
{
|
||||
struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
|
||||
int ret;
|
||||
|
||||
ret = jbt_ret_write_0(lcd, JBT_REG_DISPLAY_ON, NULL);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
backlight_enable(lcd->backlight);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int td028ttec1_disable(struct drm_panel *panel)
|
||||
{
|
||||
struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
|
||||
|
||||
backlight_disable(lcd->backlight);
|
||||
|
||||
jbt_ret_write_0(lcd, JBT_REG_DISPLAY_OFF, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int td028ttec1_unprepare(struct drm_panel *panel)
|
||||
{
|
||||
struct td028ttec1_panel *lcd = to_td028ttec1_device(panel);
|
||||
|
||||
jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0x8002, NULL);
|
||||
jbt_ret_write_0(lcd, JBT_REG_SLEEP_IN, NULL);
|
||||
jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x00, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct drm_display_mode td028ttec1_mode = {
|
||||
.clock = 22153,
|
||||
.hdisplay = 480,
|
||||
.hsync_start = 480 + 24,
|
||||
.hsync_end = 480 + 24 + 8,
|
||||
.htotal = 480 + 24 + 8 + 8,
|
||||
.vdisplay = 640,
|
||||
.vsync_start = 640 + 4,
|
||||
.vsync_end = 640 + 4 + 2,
|
||||
.vtotal = 640 + 4 + 2 + 2,
|
||||
.vrefresh = 66,
|
||||
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
|
||||
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
||||
.width_mm = 43,
|
||||
.height_mm = 58,
|
||||
};
|
||||
|
||||
static int td028ttec1_get_modes(struct drm_panel *panel)
|
||||
{
|
||||
struct drm_connector *connector = panel->connector;
|
||||
struct drm_display_mode *mode;
|
||||
|
||||
mode = drm_mode_duplicate(panel->drm, &td028ttec1_mode);
|
||||
if (!mode)
|
||||
return -ENOMEM;
|
||||
|
||||
drm_mode_set_name(mode);
|
||||
drm_mode_probed_add(connector, mode);
|
||||
|
||||
connector->display_info.width_mm = td028ttec1_mode.width_mm;
|
||||
connector->display_info.height_mm = td028ttec1_mode.height_mm;
|
||||
/*
|
||||
* FIXME: According to the datasheet sync signals are sampled on the
|
||||
* rising edge of the clock, but the code running on the OpenMoko Neo
|
||||
* FreeRunner and Neo 1973 indicates sampling on the falling edge. This
|
||||
* should be tested on a real device.
|
||||
*/
|
||||
connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
|
||||
| DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
|
||||
| DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static const struct drm_panel_funcs td028ttec1_funcs = {
|
||||
.prepare = td028ttec1_prepare,
|
||||
.enable = td028ttec1_enable,
|
||||
.disable = td028ttec1_disable,
|
||||
.unprepare = td028ttec1_unprepare,
|
||||
.get_modes = td028ttec1_get_modes,
|
||||
};
|
||||
|
||||
static int td028ttec1_probe(struct spi_device *spi)
|
||||
{
|
||||
struct td028ttec1_panel *lcd;
|
||||
int ret;
|
||||
|
||||
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
||||
if (lcd == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_drvdata(spi, lcd);
|
||||
lcd->spi = spi;
|
||||
|
||||
lcd->backlight = devm_of_find_backlight(&spi->dev);
|
||||
if (IS_ERR(lcd->backlight))
|
||||
return PTR_ERR(lcd->backlight);
|
||||
|
||||
spi->mode = SPI_MODE_3;
|
||||
spi->bits_per_word = 9;
|
||||
|
||||
ret = spi_setup(spi);
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
drm_panel_init(&lcd->panel);
|
||||
lcd->panel.dev = &lcd->spi->dev;
|
||||
lcd->panel.funcs = &td028ttec1_funcs;
|
||||
|
||||
return drm_panel_add(&lcd->panel);
|
||||
}
|
||||
|
||||
static int td028ttec1_remove(struct spi_device *spi)
|
||||
{
|
||||
struct td028ttec1_panel *lcd = spi_get_drvdata(spi);
|
||||
|
||||
drm_panel_remove(&lcd->panel);
|
||||
drm_panel_disable(&lcd->panel);
|
||||
drm_panel_unprepare(&lcd->panel);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id td028ttec1_of_match[] = {
|
||||
{ .compatible = "tpo,td028ttec1", },
|
||||
/* DT backward compatibility. */
|
||||
{ .compatible = "toppoly,td028ttec1", },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
|
||||
|
||||
static const struct spi_device_id td028ttec1_ids[] = {
|
||||
{ "tpo,td028ttec1", 0},
|
||||
{ "toppoly,td028ttec1", 0 },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
|
||||
|
||||
static struct spi_driver td028ttec1_driver = {
|
||||
.probe = td028ttec1_probe,
|
||||
.remove = td028ttec1_remove,
|
||||
.id_table = td028ttec1_ids,
|
||||
.driver = {
|
||||
.name = "panel-tpo-td028ttec1",
|
||||
.of_match_table = td028ttec1_of_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_spi_driver(td028ttec1_driver);
|
||||
|
||||
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
|
||||
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in a new issue