forked from mirrors/linux
		
	drm/mipi-dbi: Add support for DRM_FORMAT_RGB888
DRM_FORMAT_RGB888 is 24 bits per pixel and it would be natural to send it on the SPI bus using a 24 bits per word transfer. The problem with this is that not all SPI controllers support 24 bpw. Since DRM_FORMAT_RGB888 is stored in memory as little endian and the SPI bus is big endian we use 8 bpw to always get the same pixel format on the bus: b8g8r8. The MIPI DCS specification lists the standard commands that can be sent over the MIPI DBI interface. The set_address_mode (36h) command has one bit in the parameter that controls RGB/BGR order. This means that the controller can be configured to receive the pixel as BGR. RGB888 is rarely supported on these controllers but RGB666 is very common. All datasheets I have seen do at least support the pixel format option where each color is sent as one byte and the 6 MSB's are used. All this put together means that we can send each pixel as b8g8r8 and an RGB666 capable controller sees this as b6x2g6x2r6x2. v4: - s/emulation_format/pixel_format/ (Dmitry) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-4-d7c2bcb9b78d@tronnes.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
This commit is contained in:
		
							parent
							
								
									df3fb27a74
								
							
						
					
					
						commit
						4aebb79021
					
				
					 2 changed files with 30 additions and 4 deletions
				
			
		|  | @ -206,6 +206,7 @@ int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer * | |||
| 		      struct drm_rect *clip, bool swap, | ||||
| 		      struct drm_format_conv_state *fmtcnv_state) | ||||
| { | ||||
| 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev); | ||||
| 	struct drm_gem_object *gem = drm_gem_fb_get_obj(fb, 0); | ||||
| 	struct iosys_map dst_map = IOSYS_MAP_INIT_VADDR(dst); | ||||
| 	int ret; | ||||
|  | @ -222,9 +223,19 @@ int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer * | |||
| 		else | ||||
| 			drm_fb_memcpy(&dst_map, NULL, src, fb, clip); | ||||
| 		break; | ||||
| 	case DRM_FORMAT_RGB888: | ||||
| 		drm_fb_memcpy(&dst_map, NULL, src, fb, clip); | ||||
| 		break; | ||||
| 	case DRM_FORMAT_XRGB8888: | ||||
| 		switch (dbidev->pixel_format) { | ||||
| 		case DRM_FORMAT_RGB565: | ||||
| 			drm_fb_xrgb8888_to_rgb565(&dst_map, NULL, src, fb, clip, fmtcnv_state, swap); | ||||
| 			break; | ||||
| 		case DRM_FORMAT_RGB888: | ||||
| 			drm_fb_xrgb8888_to_rgb888(&dst_map, NULL, src, fb, clip, fmtcnv_state); | ||||
| 			break; | ||||
| 		} | ||||
| 		break; | ||||
| 	default: | ||||
| 		drm_err_once(fb->dev, "Format is not supported: %p4cc\n", | ||||
| 			     &fb->format->format); | ||||
|  | @ -260,9 +271,11 @@ static void mipi_dbi_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb, | |||
| 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev); | ||||
| 	unsigned int height = rect->y2 - rect->y1; | ||||
| 	unsigned int width = rect->x2 - rect->x1; | ||||
| 	const struct drm_format_info *dst_format; | ||||
| 	struct mipi_dbi *dbi = &dbidev->dbi; | ||||
| 	bool swap = dbi->swap_bytes; | ||||
| 	int ret = 0; | ||||
| 	size_t len; | ||||
| 	bool full; | ||||
| 	void *tr; | ||||
| 
 | ||||
|  | @ -283,8 +296,13 @@ static void mipi_dbi_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb, | |||
| 	mipi_dbi_set_window_address(dbidev, rect->x1, rect->x2 - 1, rect->y1, | ||||
| 				    rect->y2 - 1); | ||||
| 
 | ||||
| 	ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START, tr, | ||||
| 				   width * height * 2); | ||||
| 	if (fb->format->format == DRM_FORMAT_XRGB8888) | ||||
| 		dst_format = drm_format_info(dbidev->pixel_format); | ||||
| 	else | ||||
| 		dst_format = fb->format; | ||||
| 	len = drm_format_info_min_pitch(dst_format, 0, width) * height; | ||||
| 
 | ||||
| 	ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START, tr, len); | ||||
| err_msg: | ||||
| 	if (ret) | ||||
| 		drm_err_once(fb->dev, "Failed to update display %d\n", ret); | ||||
|  | @ -572,7 +590,7 @@ static const uint32_t mipi_dbi_formats[] = { | |||
|  * has one fixed &drm_display_mode which is rotated according to @rotation. | ||||
|  * This mode is used to set the mode config min/max width/height properties. | ||||
|  * | ||||
|  * Use mipi_dbi_dev_init() if you don't need custom formats. | ||||
|  * Use mipi_dbi_dev_init() if you want native RGB565 and emulated XRGB8888 format. | ||||
|  * | ||||
|  * Note: | ||||
|  * Some of the helper functions expects RGB565 to be the default format and the | ||||
|  | @ -631,6 +649,9 @@ int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev, | |||
| 	drm->mode_config.min_height = dbidev->mode.vdisplay; | ||||
| 	drm->mode_config.max_height = dbidev->mode.vdisplay; | ||||
| 	dbidev->rotation = rotation; | ||||
| 	dbidev->pixel_format = formats[0]; | ||||
| 	if (formats[0] == DRM_FORMAT_RGB888) | ||||
| 		dbidev->dbi.write_memory_bpw = 8; | ||||
| 
 | ||||
| 	DRM_DEBUG_KMS("rotation = %u\n", rotation); | ||||
| 
 | ||||
|  |  | |||
|  | @ -101,6 +101,11 @@ struct mipi_dbi_dev { | |||
| 	 */ | ||||
| 	struct drm_display_mode mode; | ||||
| 
 | ||||
| 	/**
 | ||||
| 	 * @pixel_format: Native pixel format (DRM_FORMAT\_\*) | ||||
| 	 */ | ||||
| 	u32 pixel_format; | ||||
| 
 | ||||
| 	/**
 | ||||
| 	 * @tx_buf: Buffer used for transfer (copy clip rect area) | ||||
| 	 */ | ||||
|  |  | |||
		Loading…
	
		Reference in a new issue
	
	 Noralf Trønnes
						Noralf Trønnes