nagai/kernel
3
0
Fork 0
forked from mirrors/linux
Code Pull requests Activity

spi: spi-omap2-mcspi.c: Toggle CS after each word

Browse source 
This patch allows the board code to define SPI devices which needs to
toggle the chip select after every word send. This is needed to get a
better resolution reading e.g. an ADC data stream.
Apart from that, as in the normal code CS is controlled by software,
a transfer is done much faster.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Matthias Brugger 2013-01-24 13:40:41 +01:00 committed by Mark Brown
parent 18dd6199fa
commit 5cbc7ca987
2 changed files with 21 additions and 0 deletions
repo.diff.show_diff_stats Download patch file Download diff file Expand all files Collapse all files

18
drivers/spi/spi-omap2-mcspi.c
View file

@ -927,6 +927,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
struct spi_device *spi;
struct spi_transfer *t = NULL;
struct spi_master *master;
int cs_active = 0;
struct omap2_mcspi_cs *cs;
struct omap2_mcspi_device_config *cd;
@ -935,6 +936,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
u32 chconf;
spi = m->spi;
master = spi->master;
cs = spi->controller_state;
cd = spi->controller_data;
@ -952,6 +954,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
if (!t->speed_hz && !t->bits_per_word)
par_override = 0;
}
if (cd && cd->cs_per_word) {
chconf = mcspi->ctx.modulctrl;
chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
mcspi->ctx.modulctrl =
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
}
if (!cs_active) {
omap2_mcspi_force_cs(spi, 1);
@ -1013,6 +1023,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
if (cs_active)
omap2_mcspi_force_cs(spi, 0);
if (cd && cd->cs_per_word) {
chconf = mcspi->ctx.modulctrl;
chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
mcspi->ctx.modulctrl =
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
}
omap2_mcspi_set_enable(spi, 0);
m->status = status;

3
include/linux/platform_data/spi-omap2-mcspi.h
View file

@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr {
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
/* toggle chip select after every word */
unsigned cs_per_word:1;
};
#endif