forked from mirrors/linux
pwm: sprd: Add Spreadtrum PWM support
This patch adds the Spreadtrum PWM support, which provides maximum 4 channels. Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
Baolin Wang
Thierry Reding
parent
bdaadd5948
commit
8aae4b02e8
3 changed files with 321 additions and 0 deletions
|
|
@ -423,6 +423,17 @@ config PWM_SPEAR
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-spear.
|
||||
|
||||
config PWM_SPRD
|
||||
tristate "Spreadtrum PWM support"
|
||||
depends on ARCH_SPRD || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Generic PWM framework driver for the PWM controller on
|
||||
Spreadtrum SoCs.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-sprd.
|
||||
|
||||
config PWM_STI
|
||||
tristate "STiH4xx PWM support"
|
||||
depends on ARCH_STI
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
|
|||
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
|
||||
obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
|
||||
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
|
||||
obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o
|
||||
obj-$(CONFIG_PWM_STI) += pwm-sti.o
|
||||
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
|
||||
obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
|
||||
|
|
|
|||
309
drivers/pwm/pwm-sprd.c
Normal file
309
drivers/pwm/pwm-sprd.c
Normal file
|
|
@ -0,0 +1,309 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2019 Spreadtrum Communications Inc.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/math64.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
|
||||
#define SPRD_PWM_PRESCALE 0x0
|
||||
#define SPRD_PWM_MOD 0x4
|
||||
#define SPRD_PWM_DUTY 0x8
|
||||
#define SPRD_PWM_ENABLE 0x18
|
||||
|
||||
#define SPRD_PWM_MOD_MAX GENMASK(7, 0)
|
||||
#define SPRD_PWM_DUTY_MSK GENMASK(15, 0)
|
||||
#define SPRD_PWM_PRESCALE_MSK GENMASK(7, 0)
|
||||
#define SPRD_PWM_ENABLE_BIT BIT(0)
|
||||
|
||||
#define SPRD_PWM_CHN_NUM 4
|
||||
#define SPRD_PWM_REGS_SHIFT 5
|
||||
#define SPRD_PWM_CHN_CLKS_NUM 2
|
||||
#define SPRD_PWM_CHN_OUTPUT_CLK 1
|
||||
|
||||
struct sprd_pwm_chn {
|
||||
struct clk_bulk_data clks[SPRD_PWM_CHN_CLKS_NUM];
|
||||
u32 clk_rate;
|
||||
};
|
||||
|
||||
struct sprd_pwm_chip {
|
||||
void __iomem *base;
|
||||
struct device *dev;
|
||||
struct pwm_chip chip;
|
||||
int num_pwms;
|
||||
struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM];
|
||||
};
|
||||
|
||||
/*
|
||||
* The list of clocks required by PWM channels, and each channel has 2 clocks:
|
||||
* enable clock and pwm clock.
|
||||
*/
|
||||
static const char * const sprd_pwm_clks[] = {
|
||||
"enable0", "pwm0",
|
||||
"enable1", "pwm1",
|
||||
"enable2", "pwm2",
|
||||
"enable3", "pwm3",
|
||||
};
|
||||
|
||||
static u32 sprd_pwm_read(struct sprd_pwm_chip *spc, u32 hwid, u32 reg)
|
||||
{
|
||||
u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
|
||||
|
||||
return readl_relaxed(spc->base + offset);
|
||||
}
|
||||
|
||||
static void sprd_pwm_write(struct sprd_pwm_chip *spc, u32 hwid,
|
||||
u32 reg, u32 val)
|
||||
{
|
||||
u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
|
||||
|
||||
writel_relaxed(val, spc->base + offset);
|
||||
}
|
||||
|
||||
static void sprd_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
struct sprd_pwm_chip *spc =
|
||||
container_of(chip, struct sprd_pwm_chip, chip);
|
||||
struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
|
||||
u32 val, duty, prescale;
|
||||
u64 tmp;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* The clocks to PWM channel has to be enabled first before
|
||||
* reading to the registers.
|
||||
*/
|
||||
ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
|
||||
if (ret) {
|
||||
dev_err(spc->dev, "failed to enable pwm%u clocks\n",
|
||||
pwm->hwpwm);
|
||||
return;
|
||||
}
|
||||
|
||||
val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_ENABLE);
|
||||
if (val & SPRD_PWM_ENABLE_BIT)
|
||||
state->enabled = true;
|
||||
else
|
||||
state->enabled = false;
|
||||
|
||||
/*
|
||||
* The hardware provides a counter that is feed by the source clock.
|
||||
* The period length is (PRESCALE + 1) * MOD counter steps.
|
||||
* The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
|
||||
* Thus the period_ns and duty_ns calculation formula should be:
|
||||
* period_ns = NSEC_PER_SEC * (prescale + 1) * mod / clk_rate
|
||||
* duty_ns = NSEC_PER_SEC * (prescale + 1) * duty / clk_rate
|
||||
*/
|
||||
val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_PRESCALE);
|
||||
prescale = val & SPRD_PWM_PRESCALE_MSK;
|
||||
tmp = (prescale + 1) * NSEC_PER_SEC * SPRD_PWM_MOD_MAX;
|
||||
state->period = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
|
||||
|
||||
val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_DUTY);
|
||||
duty = val & SPRD_PWM_DUTY_MSK;
|
||||
tmp = (prescale + 1) * NSEC_PER_SEC * duty;
|
||||
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
|
||||
|
||||
/* Disable PWM clocks if the PWM channel is not in enable state. */
|
||||
if (!state->enabled)
|
||||
clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
|
||||
}
|
||||
|
||||
static int sprd_pwm_config(struct sprd_pwm_chip *spc, struct pwm_device *pwm,
|
||||
int duty_ns, int period_ns)
|
||||
{
|
||||
struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
|
||||
u32 prescale, duty;
|
||||
u64 tmp;
|
||||
|
||||
/*
|
||||
* The hardware provides a counter that is feed by the source clock.
|
||||
* The period length is (PRESCALE + 1) * MOD counter steps.
|
||||
* The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
|
||||
*
|
||||
* To keep the maths simple we're always using MOD = SPRD_PWM_MOD_MAX.
|
||||
* The value for PRESCALE is selected such that the resulting period
|
||||
* gets the maximal length not bigger than the requested one with the
|
||||
* given settings (MOD = SPRD_PWM_MOD_MAX and input clock).
|
||||
*/
|
||||
duty = duty_ns * SPRD_PWM_MOD_MAX / period_ns;
|
||||
|
||||
tmp = (u64)chn->clk_rate * period_ns;
|
||||
do_div(tmp, NSEC_PER_SEC);
|
||||
prescale = DIV_ROUND_CLOSEST_ULL(tmp, SPRD_PWM_MOD_MAX) - 1;
|
||||
if (prescale > SPRD_PWM_PRESCALE_MSK)
|
||||
prescale = SPRD_PWM_PRESCALE_MSK;
|
||||
|
||||
/*
|
||||
* Note: Writing DUTY triggers the hardware to actually apply the
|
||||
* values written to MOD and DUTY to the output, so must keep writing
|
||||
* DUTY last.
|
||||
*
|
||||
* The hardware can ensures that current running period is completed
|
||||
* before changing a new configuration to avoid mixed settings.
|
||||
*/
|
||||
sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PRESCALE, prescale);
|
||||
sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_MOD, SPRD_PWM_MOD_MAX);
|
||||
sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_DUTY, duty);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sprd_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
struct sprd_pwm_chip *spc =
|
||||
container_of(chip, struct sprd_pwm_chip, chip);
|
||||
struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
|
||||
struct pwm_state *cstate = &pwm->state;
|
||||
int ret;
|
||||
|
||||
if (state->enabled) {
|
||||
if (!cstate->enabled) {
|
||||
/*
|
||||
* The clocks to PWM channel has to be enabled first
|
||||
* before writing to the registers.
|
||||
*/
|
||||
ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM,
|
||||
chn->clks);
|
||||
if (ret) {
|
||||
dev_err(spc->dev,
|
||||
"failed to enable pwm%u clocks\n",
|
||||
pwm->hwpwm);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
if (state->period != cstate->period ||
|
||||
state->duty_cycle != cstate->duty_cycle) {
|
||||
ret = sprd_pwm_config(spc, pwm, state->duty_cycle,
|
||||
state->period);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1);
|
||||
} else if (cstate->enabled) {
|
||||
/*
|
||||
* Note: After setting SPRD_PWM_ENABLE to zero, the controller
|
||||
* will not wait for current period to be completed, instead it
|
||||
* will stop the PWM channel immediately.
|
||||
*/
|
||||
sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 0);
|
||||
|
||||
clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops sprd_pwm_ops = {
|
||||
.apply = sprd_pwm_apply,
|
||||
.get_state = sprd_pwm_get_state,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
|
||||
{
|
||||
struct clk *clk_pwm;
|
||||
int ret, i;
|
||||
|
||||
for (i = 0; i < SPRD_PWM_CHN_NUM; i++) {
|
||||
struct sprd_pwm_chn *chn = &spc->chn[i];
|
||||
int j;
|
||||
|
||||
for (j = 0; j < SPRD_PWM_CHN_CLKS_NUM; ++j)
|
||||
chn->clks[j].id =
|
||||
sprd_pwm_clks[i * SPRD_PWM_CHN_CLKS_NUM + j];
|
||||
|
||||
ret = devm_clk_bulk_get(spc->dev, SPRD_PWM_CHN_CLKS_NUM,
|
||||
chn->clks);
|
||||
if (ret) {
|
||||
if (ret == -ENOENT)
|
||||
break;
|
||||
|
||||
if (ret != -EPROBE_DEFER)
|
||||
dev_err(spc->dev,
|
||||
"failed to get channel clocks\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
clk_pwm = chn->clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;
|
||||
chn->clk_rate = clk_get_rate(clk_pwm);
|
||||
}
|
||||
|
||||
if (!i) {
|
||||
dev_err(spc->dev, "no available PWM channels\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
spc->num_pwms = i;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sprd_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct sprd_pwm_chip *spc;
|
||||
int ret;
|
||||
|
||||
spc = devm_kzalloc(&pdev->dev, sizeof(*spc), GFP_KERNEL);
|
||||
if (!spc)
|
||||
return -ENOMEM;
|
||||
|
||||
spc->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(spc->base))
|
||||
return PTR_ERR(spc->base);
|
||||
|
||||
spc->dev = &pdev->dev;
|
||||
platform_set_drvdata(pdev, spc);
|
||||
|
||||
ret = sprd_pwm_clk_init(spc);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
spc->chip.dev = &pdev->dev;
|
||||
spc->chip.ops = &sprd_pwm_ops;
|
||||
spc->chip.base = -1;
|
||||
spc->chip.npwm = spc->num_pwms;
|
||||
|
||||
ret = pwmchip_add(&spc->chip);
|
||||
if (ret)
|
||||
dev_err(&pdev->dev, "failed to add PWM chip\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sprd_pwm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct sprd_pwm_chip *spc = platform_get_drvdata(pdev);
|
||||
|
||||
return pwmchip_remove(&spc->chip);
|
||||
}
|
||||
|
||||
static const struct of_device_id sprd_pwm_of_match[] = {
|
||||
{ .compatible = "sprd,ums512-pwm", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sprd_pwm_of_match);
|
||||
|
||||
static struct platform_driver sprd_pwm_driver = {
|
||||
.driver = {
|
||||
.name = "sprd-pwm",
|
||||
.of_match_table = sprd_pwm_of_match,
|
||||
},
|
||||
.probe = sprd_pwm_probe,
|
||||
.remove = sprd_pwm_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(sprd_pwm_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Spreadtrum PWM Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in a new issue