nagai/kernel
3
0
Fork 0
forked from mirrors/linux
Code Pull requests Activity

net: dsa: b53: Add support for Broadcom RoboSwitch

Browse source 
This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.

This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).

Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2016-06-09 18:23:53 -07:00 committed by David S. Miller
parent 409a5f27ed
commit 967dd82ffc
14 changed files with 3397 additions and 0 deletions
repo.diff.show_diff_stats Download patch file Download diff file Expand all files Collapse all files

88
Documentation/devicetree/bindings/net/dsa/b53.txt Normal file
View file

@ -0,0 +1,88 @@
Broadcom BCM53xx Ethernet switches
==================================
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "brcm,bcm5325"
"brcm,bcm53115"
"brcm,bcm53125"
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
"brcm,bcm5397"
"brcm,bcm5398"
For the BCM5310x SoCs with an integrated switch, must be one of:
"brcm,bcm53010-srab"
"brcm,bcm53011-srab"
"brcm,bcm53012-srab"
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
"brcm,bcm3384-switch"
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
eth0: ethernet@10001000 {
compatible = "brcm,unimac";
reg = <0x10001000 0x1000>;
fixed-link {
speed = <1000>;
duplex-full;
};
};
mdio0: mdio@10000000 {
compatible = "brcm,unimac-mdio";
#address-cells = <1>;
#size-cells = <0>;
switch0: ethernet-switch@30 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
ports {
port0@0 {
reg = <0>;
label = "lan1";
};
port1@1 {
reg = <1>;
label = "lan2";
};
port5@5 {
reg = <5>;
label = "cable-modem";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
};
port8@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
ethernet = <&eth0>;
};
};
};
};

8
MAINTAINERS
View file

@ -2454,6 +2454,14 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/b44.*
BROADCOM B53 ETHERNET SWITCH DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
BROADCOM GENET ETHERNET DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org

2
drivers/net/dsa/Kconfig
View file

@ -28,4 +28,6 @@ config NET_DSA_BCM_SF2
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
source "drivers/net/dsa/b53/Kconfig"
endmenu

2
drivers/net/dsa/Makefile
View file

@ -1,3 +1,5 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
obj-y += b53/

33
drivers/net/dsa/b53/Kconfig Normal file
View file

@ -0,0 +1,33 @@
menuconfig B53
tristate "Broadcom BCM53xx managed switch support"
depends on NET_DSA
help
This driver adds support for Broadcom managed switch chips. It supports
BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
integrated switches.
config B53_SPI_DRIVER
tristate "B53 SPI connected switch driver"
depends on B53 && SPI
help
Select to enable support for registering switches configured through SPI.
config B53_MDIO_DRIVER
tristate "B53 MDIO connected switch driver"
depends on B53
help
Select to enable support for registering switches configured through MDIO.
config B53_MMAP_DRIVER
tristate "B53 MMAP connected switch driver"
depends on B53 && HAS_IOMEM
help
Select to enable support for memory-mapped switches like the BCM63XX
integrated switches.
config B53_SRAB_DRIVER
tristate "B53 SRAB connected switch driver"
depends on B53 && HAS_IOMEM
help
Select to enable support for memory-mapped Switch Register Access
Bridge Registers (SRAB) like it is found on the BCM53010

6
drivers/net/dsa/b53/Makefile Normal file
View file

@ -0,0 +1,6 @@
obj-$(CONFIG_B53) += b53_common.o
obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o
obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o
obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o
obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o

1158
drivers/net/dsa/b53/b53_common.c Normal file
View file

File diff suppressed because it is too large Load diff

381
drivers/net/dsa/b53/b53_mdio.c Normal file
View file

@ -0,0 +1,381 @@
/*
* B53 register access through MII registers
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/brcmphy.h>
#include <linux/rtnetlink.h>
#include <net/dsa.h>
#include "b53_priv.h"
/* MII registers */
#define REG_MII_PAGE 0x10 /* MII Page register */
#define REG_MII_ADDR 0x11 /* MII Address register */
#define REG_MII_DATA0 0x18 /* MII Data register 0 */
#define REG_MII_DATA1 0x19 /* MII Data register 1 */
#define REG_MII_DATA2 0x1a /* MII Data register 2 */
#define REG_MII_DATA3 0x1b /* MII Data register 3 */
#define REG_MII_PAGE_ENABLE BIT(0)
#define REG_MII_ADDR_WRITE BIT(0)
#define REG_MII_ADDR_READ BIT(1)
static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
{
int i;
u16 v;
int ret;
struct mii_bus *bus = dev->priv;
if (dev->current_page != page) {
/* set page number */
v = (page << 8) | REG_MII_PAGE_ENABLE;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_PAGE, v);
if (ret)
return ret;
dev->current_page = page;
}
/* set register address */
v = (reg << 8) | op;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
if (ret)
return ret;
/* check if operation completed */
for (i = 0; i < 5; ++i) {
v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_ADDR);
if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0) & 0xff;
return 0;
}
static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
return 0;
}
static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
*val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA1) << 16;
return 0;
}
static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 2; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 3; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u32 temp = value;
for (i = 0; i < 2; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 3; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 4; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
u16 *value)
{
struct mii_bus *bus = dev->priv;
*value = mdiobus_read_nested(bus, addr, reg);
return 0;
}
static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
u16 value)
{
struct mii_bus *bus = dev->bus;
return mdiobus_write_nested(bus, addr, reg, value);
}
static struct b53_io_ops b53_mdio_ops = {
.read8 = b53_mdio_read8,
.read16 = b53_mdio_read16,
.read32 = b53_mdio_read32,
.read48 = b53_mdio_read48,
.read64 = b53_mdio_read64,
.write8 = b53_mdio_write8,
.write16 = b53_mdio_write16,
.write32 = b53_mdio_write32,
.write48 = b53_mdio_write48,
.write64 = b53_mdio_write64,
.phy_read16 = b53_mdio_phy_read16,
.phy_write16 = b53_mdio_phy_write16,
};
#define B53_BRCM_OUI_1 0x0143bc00
#define B53_BRCM_OUI_2 0x03625c00
#define B53_BRCM_OUI_3 0x00406000
static int b53_mdio_probe(struct mdio_device *mdiodev)
{
struct b53_device *dev;
u32 phy_id;
int ret;
/* allow the generic PHY driver to take over the non-management MDIO
* addresses
*/
if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
mdiodev->addr);
return -ENODEV;
}
/* read the first port's id */
phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
/* BCM5325, BCM539x (OUI_1)
* BCM53125, BCM53128 (OUI_2)
* BCM5365 (OUI_3)
*/
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_3) {
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
return -ENODEV;
}
dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
if (!dev)
return -ENOMEM;
/* we don't use page 0xff, so force a page set */
dev->current_page = 0xff;
dev->bus = mdiodev->bus;
dev_set_drvdata(&mdiodev->dev, dev);
ret = b53_switch_register(dev);
if (ret) {
dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
return ret;
}
return ret;
}
static void b53_mdio_remove(struct mdio_device *mdiodev)
{
struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
struct dsa_switch *ds = dev->ds;
dsa_unregister_switch(ds);
}
static const struct of_device_id b53_of_match[] = {
{ .compatible = "brcm,bcm5325" },
{ .compatible = "brcm,bcm53115" },
{ .compatible = "brcm,bcm53125" },
{ .compatible = "brcm,bcm53128" },
{ .compatible = "brcm,bcm5365" },
{ .compatible = "brcm,bcm5395" },
{ .compatible = "brcm,bcm5397" },
{ .compatible = "brcm,bcm5398" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, b53_of_match);
static struct mdio_driver b53_mdio_driver = {
.probe = b53_mdio_probe,
.remove = b53_mdio_remove,
.mdiodrv.driver = {
.name = "bcm53xx",
.of_match_table = b53_of_match,
},
};
static int __init b53_mdio_driver_register(void)
{
return mdio_driver_register(&b53_mdio_driver);
}
module_init(b53_mdio_driver_register);
static void __exit b53_mdio_driver_unregister(void)
{
mdio_driver_unregister(&b53_mdio_driver);
}
module_exit(b53_mdio_driver_unregister);
MODULE_DESCRIPTION("B53 MDIO access driver");
MODULE_LICENSE("Dual BSD/GPL");

260
drivers/net/dsa/b53/b53_mmap.c Normal file
View file

@ -0,0 +1,260 @@
/*
* B53 register access through memory mapped registers
*
* Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/kconfig.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
struct b53_mmap_priv {
void __iomem *regs;
};
static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
u8 __iomem *regs = dev->priv;
*val = readb(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 2))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
*val = __raw_readw(regs + (page << 8) + reg);
else
*val = readw(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
*val = __raw_readl(regs + (page << 8) + reg);
else
*val = readl(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
if (WARN_ON(reg % 2))
return -EINVAL;
if (reg % 4) {
u16 lo;
u32 hi;
b53_mmap_read16(dev, page, reg, &lo);
b53_mmap_read32(dev, page, reg + 2, &hi);
*val = ((u64)hi << 16) | lo;
} else {
u32 lo;
u16 hi;
b53_mmap_read32(dev, page, reg, &lo);
b53_mmap_read16(dev, page, reg + 4, &hi);
*val = ((u64)hi << 32) | lo;
}
return 0;
}
static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
u32 hi, lo;
if (WARN_ON(reg % 4))
return -EINVAL;
b53_mmap_read32(dev, page, reg, &lo);
b53_mmap_read32(dev, page, reg + 4, &hi);
*val = ((u64)hi << 32) | lo;
return 0;
}
static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
u8 __iomem *regs = dev->priv;
writeb(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 2))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
__raw_writew(value, regs + (page << 8) + reg);
else
writew(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
__raw_writel(value, regs + (page << 8) + reg);
else
writel(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
if (WARN_ON(reg % 2))
return -EINVAL;
if (reg % 4) {
u32 hi = (u32)(value >> 16);
u16 lo = (u16)value;
b53_mmap_write16(dev, page, reg, lo);
b53_mmap_write32(dev, page, reg + 2, hi);
} else {
u16 hi = (u16)(value >> 32);
u32 lo = (u32)value;
b53_mmap_write32(dev, page, reg, lo);
b53_mmap_write16(dev, page, reg + 4, hi);
}
return 0;
}
static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
u32 hi, lo;
hi = upper_32_bits(value);
lo = lower_32_bits(value);
if (WARN_ON(reg % 4))
return -EINVAL;
b53_mmap_write32(dev, page, reg, lo);
b53_mmap_write32(dev, page, reg + 4, hi);
return 0;
}
static struct b53_io_ops b53_mmap_ops = {
.read8 = b53_mmap_read8,
.read16 = b53_mmap_read16,
.read32 = b53_mmap_read32,
.read48 = b53_mmap_read48,
.read64 = b53_mmap_read64,
.write8 = b53_mmap_write8,
.write16 = b53_mmap_write16,
.write32 = b53_mmap_write32,
.write48 = b53_mmap_write48,
.write64 = b53_mmap_write64,
};
static int b53_mmap_probe(struct platform_device *pdev)
{
struct b53_platform_data *pdata = pdev->dev.platform_data;
struct b53_device *dev;
if (!pdata)
return -EINVAL;
dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, pdata->regs);
if (!dev)
return -ENOMEM;
if (pdata)
dev->pdata = pdata;
platform_set_drvdata(pdev, dev);
return b53_switch_register(dev);
}
static int b53_mmap_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (dev)
b53_switch_remove(dev);
return 0;
}
static const struct of_device_id b53_mmap_of_table[] = {
{ .compatible = "brcm,bcm3384-switch" },
{ .compatible = "brcm,bcm6328-switch" },
{ .compatible = "brcm,bcm6368-switch" },
{ .compatible = "brcm,bcm63xx-switch" },
{ /* sentinel */ },
};
static struct platform_driver b53_mmap_driver = {
.probe = b53_mmap_probe,
.remove = b53_mmap_remove,
.driver = {
.name = "b53-switch",
.of_match_table = b53_mmap_of_table,
},
};
module_platform_driver(b53_mmap_driver);
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
MODULE_DESCRIPTION("B53 MMAP access driver");
MODULE_LICENSE("Dual BSD/GPL");

322
drivers/net/dsa/b53/b53_priv.h Normal file
View file

@ -0,0 +1,322 @@
/*
* B53 common definitions
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_PRIV_H
#define __B53_PRIV_H
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/phy.h>
#include <net/dsa.h>
struct b53_device;
struct b53_io_ops {
int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value);
int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value);
int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value);
int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value);
int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value);
int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
};
enum {
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
BCM5395_DEVICE_ID = 0x95,
BCM5397_DEVICE_ID = 0x97,
BCM5398_DEVICE_ID = 0x98,
BCM53115_DEVICE_ID = 0x53115,
BCM53125_DEVICE_ID = 0x53125,
BCM53128_DEVICE_ID = 0x53128,
BCM63XX_DEVICE_ID = 0x6300,
BCM53010_DEVICE_ID = 0x53010,
BCM53011_DEVICE_ID = 0x53011,
BCM53012_DEVICE_ID = 0x53012,
BCM53018_DEVICE_ID = 0x53018,
BCM53019_DEVICE_ID = 0x53019,
};
#define B53_N_PORTS 9
#define B53_N_PORTS_25 6
struct b53_port {
};
struct b53_device {
struct dsa_switch *ds;
struct b53_platform_data *pdata;
const char *name;
struct mutex reg_mutex;
struct mutex stats_mutex;
const struct b53_io_ops *ops;
/* chip specific data */
u32 chip_id;
u8 core_rev;
u8 vta_regs[3];
u8 duplex_reg;
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
int reset_gpio;
/* used ports mask */
u16 enabled_ports;
unsigned int cpu_port;
/* connect specific data */
u8 current_page;
struct device *dev;
/* Master MDIO bus we got probed from */
struct mii_bus *bus;
/* Slave MDIO bus we created */
struct mii_bus *slave_bus;
void *priv;
/* run time configuration */
unsigned enable_jumbo:1;
unsigned allow_vid_4095:1;
unsigned int num_vlans;
unsigned int num_ports;
struct b53_port *ports;
};
#define b53_for_each_port(dev, i) \
for (i = 0; i < B53_N_PORTS; i++) \
if (dev->enabled_ports & BIT(i))
static inline int is5325(struct b53_device *dev)
{
return dev->chip_id == BCM5325_DEVICE_ID;
}
static inline int is5365(struct b53_device *dev)
{
#ifdef CONFIG_BCM47XX
return dev->chip_id == BCM5365_DEVICE_ID;
#else
return 0;
#endif
}
static inline int is5397_98(struct b53_device *dev)
{
return dev->chip_id == BCM5397_DEVICE_ID ||
dev->chip_id == BCM5398_DEVICE_ID;
}
static inline int is539x(struct b53_device *dev)
{
return dev->chip_id == BCM5395_DEVICE_ID ||
dev->chip_id == BCM5397_DEVICE_ID ||
dev->chip_id == BCM5398_DEVICE_ID;
}
static inline int is531x5(struct b53_device *dev)
{
return dev->chip_id == BCM53115_DEVICE_ID ||
dev->chip_id == BCM53125_DEVICE_ID ||
dev->chip_id == BCM53128_DEVICE_ID;
}
static inline int is63xx(struct b53_device *dev)
{
#ifdef CONFIG_BCM63XX
return dev->chip_id == BCM63XX_DEVICE_ID;
#else
return 0;
#endif
}
static inline int is5301x(struct b53_device *dev)
{
return dev->chip_id == BCM53010_DEVICE_ID ||
dev->chip_id == BCM53011_DEVICE_ID ||
dev->chip_id == BCM53012_DEVICE_ID ||
dev->chip_id == BCM53018_DEVICE_ID ||
dev->chip_id == BCM53019_DEVICE_ID;
}
#define B53_CPU_PORT_25 5
#define B53_CPU_PORT 8
static inline int is_cpu_port(struct b53_device *dev, int port)
{
return dev->cpu_port;
}
struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
void *priv);
int b53_switch_detect(struct b53_device *dev);
int b53_switch_register(struct b53_device *dev);
static inline void b53_switch_remove(struct b53_device *dev)
{
dsa_unregister_switch(dev->ds);
}
static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read8(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read16(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read32(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read48(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read64(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write8(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write16(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write32(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write48(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write64(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
#ifdef CONFIG_BCM47XX
#include <linux/version.h>
#include <linux/bcm47xx_nvram.h>
#include <bcm47xx_board.h>
static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
{
enum bcm47xx_board board = bcm47xx_board_get();
switch (board) {
case BCM47XX_BOARD_LINKSYS_WRT300NV11:
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
return 8;
default:
return bcm47xx_nvram_gpio_pin("robo_reset");
}
}
#else
static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
{
return -ENOENT;
}
#endif
#endif

358
drivers/net/dsa/b53/b53_regs.h Normal file
View file

@ -0,0 +1,358 @@
/*
* B53 register definitions
*
* Copyright (C) 2004 Broadcom Corporation
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_REGS_H
#define __B53_REGS_H
/* Management Port (SMP) Page offsets */
#define B53_CTRL_PAGE 0x00 /* Control */
#define B53_STAT_PAGE 0x01 /* Status */
#define B53_MGMT_PAGE 0x02 /* Management Mode */
#define B53_MIB_AC_PAGE 0x03 /* MIB Autocast */
#define B53_ARLCTRL_PAGE 0x04 /* ARL Control */
#define B53_ARLIO_PAGE 0x05 /* ARL Access */
#define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */
#define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */
/* PHY Registers */
#define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */
#define B53_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
#define B53_ALL_PORT_PAGE 0x19 /* All ports MII (broadcast) */
/* MIB registers */
#define B53_MIB_PAGE(i) (0x20 + (i))
/* Quality of Service (QoS) Registers */
#define B53_QOS_PAGE 0x30
/* Port VLAN Page */
#define B53_PVLAN_PAGE 0x31
/* VLAN Registers */
#define B53_VLAN_PAGE 0x34
/* Jumbo Frame Registers */
#define B53_JUMBO_PAGE 0x40
/* CFP Configuration Registers Page */
#define B53_CFP_PAGE 0xa1
/*************************************************************************
* Control Page registers
*************************************************************************/
/* Port Control Register (8 bit) */
#define B53_PORT_CTRL(i) (0x00 + (i))
#define PORT_CTRL_RX_DISABLE BIT(0)
#define PORT_CTRL_TX_DISABLE BIT(1)
#define PORT_CTRL_RX_BCST_EN BIT(2) /* Broadcast RX (P8 only) */
#define PORT_CTRL_RX_MCST_EN BIT(3) /* Multicast RX (P8 only) */
#define PORT_CTRL_RX_UCST_EN BIT(4) /* Unicast RX (P8 only) */
#define PORT_CTRL_STP_STATE_S 5
#define PORT_CTRL_STP_STATE_MASK (0x7 << PORT_CTRL_STP_STATE_S)
/* SMP Control Register (8 bit) */
#define B53_SMP_CTRL 0x0a
/* Switch Mode Control Register (8 bit) */
#define B53_SWITCH_MODE 0x0b
#define SM_SW_FWD_MODE BIT(0) /* 1 = Managed Mode */
#define SM_SW_FWD_EN BIT(1) /* Forwarding Enable */
/* IMP Port state override register (8 bit) */
#define B53_PORT_OVERRIDE_CTRL 0x0e
#define PORT_OVERRIDE_LINK BIT(0)
#define PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
#define PORT_OVERRIDE_SPEED_S 2
#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */
#define PORT_OVERRIDE_RX_FLOW BIT(4)
#define PORT_OVERRIDE_TX_FLOW BIT(5)
#define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */
#define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */
/* Power-down mode control */
#define B53_PD_MODE_CTRL_25 0x0f
/* IP Multicast control (8 bit) */
#define B53_IP_MULTICAST_CTRL 0x21
#define B53_IPMC_FWD_EN BIT(1)
#define B53_UC_FWD_EN BIT(6)
#define B53_MC_FWD_EN BIT(7)
/* (16 bit) */
#define B53_UC_FLOOD_MASK 0x32
#define B53_MC_FLOOD_MASK 0x34
#define B53_IPMC_FLOOD_MASK 0x36
/*
* Override Ports 0-7 State on devices with xMII interfaces (8 bit)
*
* For port 8 still use B53_PORT_OVERRIDE_CTRL
* Please note that not all ports are available on every hardware, e.g. BCM5301X
* don't include overriding port 6, BCM63xx also have some limitations.
*/
#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + (i))
#define GMII_PO_LINK BIT(0)
#define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
#define GMII_PO_SPEED_S 2
#define GMII_PO_SPEED_10M (0 << GMII_PO_SPEED_S)
#define GMII_PO_SPEED_100M (1 << GMII_PO_SPEED_S)
#define GMII_PO_SPEED_1000M (2 << GMII_PO_SPEED_S)
#define GMII_PO_RX_FLOW BIT(4)
#define GMII_PO_TX_FLOW BIT(5)
#define GMII_PO_EN BIT(6) /* Use the register contents */
#define GMII_PO_SPEED_2000M BIT(7) /* BCM5301X only, requires setting 1000M */
#define B53_RGMII_CTRL_IMP 0x60
#define RGMII_CTRL_ENABLE_GMII BIT(7)
#define RGMII_CTRL_TIMING_SEL BIT(2)
#define RGMII_CTRL_DLL_RXC BIT(1)
#define RGMII_CTRL_DLL_TXC BIT(0)
#define B53_RGMII_CTRL_P(i) (B53_RGMII_CTRL_IMP + (i))
/* Software reset register (8 bit) */
#define B53_SOFTRESET 0x79
#define SW_RST BIT(7)
#define EN_SW_RST BIT(4)
/* Fast Aging Control register (8 bit) */
#define B53_FAST_AGE_CTRL 0x88
#define FAST_AGE_STATIC BIT(0)
#define FAST_AGE_DYNAMIC BIT(1)
#define FAST_AGE_PORT BIT(2)
#define FAST_AGE_VLAN BIT(3)
#define FAST_AGE_STP BIT(4)
#define FAST_AGE_MC BIT(5)
#define FAST_AGE_DONE BIT(7)
/*************************************************************************
* Status Page registers
*************************************************************************/
/* Link Status Summary Register (16bit) */
#define B53_LINK_STAT 0x00
/* Link Status Change Register (16 bit) */
#define B53_LINK_STAT_CHANGE 0x02
/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
#define B53_SPEED_STAT 0x04
#define SPEED_PORT_FE(reg, port) (((reg) >> (port)) & 1)
#define SPEED_PORT_GE(reg, port) (((reg) >> 2 * (port)) & 3)
#define SPEED_STAT_10M 0
#define SPEED_STAT_100M 1
#define SPEED_STAT_1000M 2
/* Duplex Status Summary (16 bit) */
#define B53_DUPLEX_STAT_FE 0x06
#define B53_DUPLEX_STAT_GE 0x08
#define B53_DUPLEX_STAT_63XX 0x0c
/* Revision ID register for BCM5325 */
#define B53_REV_ID_25 0x50
/* Strap Value (48 bit) */
#define B53_STRAP_VALUE 0x70
#define SV_GMII_CTRL_115 BIT(27)
/*************************************************************************
* Management Mode Page Registers
*************************************************************************/
/* Global Management Config Register (8 bit) */
#define B53_GLOBAL_CONFIG 0x00
#define GC_RESET_MIB 0x01
#define GC_RX_BPDU_EN 0x02
#define GC_MIB_AC_HDR_EN 0x10
#define GC_MIB_AC_EN 0x20
#define GC_FRM_MGMT_PORT_M 0xC0
#define GC_FRM_MGMT_PORT_04 0x00
#define GC_FRM_MGMT_PORT_MII 0x80
/* Broadcom Header control register (8 bit) */
#define B53_BRCM_HDR 0x03
#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
/* Device ID register (8 or 32 bit) */
#define B53_DEVICE_ID 0x30
/* Revision ID register (8 bit) */
#define B53_REV_ID 0x40
/*************************************************************************
* ARL Access Page Registers
*************************************************************************/
/* VLAN Table Access Register (8 bit) */
#define B53_VT_ACCESS 0x80
#define B53_VT_ACCESS_9798 0x60 /* for BCM5397/BCM5398 */
#define B53_VT_ACCESS_63XX 0x60 /* for BCM6328/62/68 */
#define VTA_CMD_WRITE 0
#define VTA_CMD_READ 1
#define VTA_CMD_CLEAR 2
#define VTA_START_CMD BIT(7)
/* VLAN Table Index Register (16 bit) */
#define B53_VT_INDEX 0x81
#define B53_VT_INDEX_9798 0x61
#define B53_VT_INDEX_63XX 0x62
/* VLAN Table Entry Register (32 bit) */
#define B53_VT_ENTRY 0x83
#define B53_VT_ENTRY_9798 0x63
#define B53_VT_ENTRY_63XX 0x64
#define VTE_MEMBERS 0x1ff
#define VTE_UNTAG_S 9
#define VTE_UNTAG (0x1ff << 9)
/*************************************************************************
* Port VLAN Registers
*************************************************************************/
/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
#define B53_PVLAN_PORT_MASK(i) ((i) * 2)
/*************************************************************************
* 802.1Q Page Registers
*************************************************************************/
/* Global QoS Control (8 bit) */
#define B53_QOS_GLOBAL_CTL 0x00
/* Enable 802.1Q for individual Ports (16 bit) */
#define B53_802_1P_EN 0x04
/*************************************************************************
* VLAN Page Registers
*************************************************************************/
/* VLAN Control 0 (8 bit) */
#define B53_VLAN_CTRL0 0x00
#define VC0_8021PF_CTRL_MASK 0x3
#define VC0_8021PF_CTRL_NONE 0x0
#define VC0_8021PF_CTRL_CHANGE_PRI 0x1
#define VC0_8021PF_CTRL_CHANGE_VID 0x2
#define VC0_8021PF_CTRL_CHANGE_BOTH 0x3
#define VC0_8021QF_CTRL_MASK 0xc
#define VC0_8021QF_CTRL_CHANGE_PRI 0x1
#define VC0_8021QF_CTRL_CHANGE_VID 0x2
#define VC0_8021QF_CTRL_CHANGE_BOTH 0x3
#define VC0_RESERVED_1 BIT(1)
#define VC0_DROP_VID_MISS BIT(4)
#define VC0_VID_HASH_VID BIT(5)
#define VC0_VID_CHK_EN BIT(6) /* Use VID,DA or VID,SA */
#define VC0_VLAN_EN BIT(7) /* 802.1Q VLAN Enabled */
/* VLAN Control 1 (8 bit) */
#define B53_VLAN_CTRL1 0x01
#define VC1_RX_MCST_TAG_EN BIT(1)
#define VC1_RX_MCST_FWD_EN BIT(2)
#define VC1_RX_MCST_UNTAG_EN BIT(3)
/* VLAN Control 2 (8 bit) */
#define B53_VLAN_CTRL2 0x02
/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
#define B53_VLAN_CTRL3 0x03
#define B53_VLAN_CTRL3_63XX 0x04
#define VC3_MAXSIZE_1532 BIT(6) /* 5325 only */
#define VC3_HIGH_8BIT_EN BIT(7) /* 5325 only */
/* VLAN Control 4 (8 bit) */
#define B53_VLAN_CTRL4 0x05
#define B53_VLAN_CTRL4_25 0x04
#define B53_VLAN_CTRL4_63XX 0x06
#define VC4_ING_VID_CHECK_S 6
#define VC4_ING_VID_CHECK_MASK (0x3 << VC4_ING_VID_CHECK_S)
#define VC4_ING_VID_VIO_FWD 0 /* forward, but do not learn */
#define VC4_ING_VID_VIO_DROP 1 /* drop VID violations */
#define VC4_NO_ING_VID_CHK 2 /* do not check */
#define VC4_ING_VID_VIO_TO_IMP 3 /* redirect to MII port */
/* VLAN Control 5 (8 bit) */
#define B53_VLAN_CTRL5 0x06
#define B53_VLAN_CTRL5_25 0x05
#define B53_VLAN_CTRL5_63XX 0x07
#define VC5_VID_FFF_EN BIT(2)
#define VC5_DROP_VTABLE_MISS BIT(3)
/* VLAN Control 6 (8 bit) */
#define B53_VLAN_CTRL6 0x07
#define B53_VLAN_CTRL6_63XX 0x08
/* VLAN Table Access Register (16 bit) */
#define B53_VLAN_TABLE_ACCESS_25 0x06 /* BCM5325E/5350 */
#define B53_VLAN_TABLE_ACCESS_65 0x08 /* BCM5365 */
#define VTA_VID_LOW_MASK_25 0xf
#define VTA_VID_LOW_MASK_65 0xff
#define VTA_VID_HIGH_S_25 4
#define VTA_VID_HIGH_S_65 8
#define VTA_VID_HIGH_MASK_25 (0xff << VTA_VID_HIGH_S_25E)
#define VTA_VID_HIGH_MASK_65 (0xf << VTA_VID_HIGH_S_65)
#define VTA_RW_STATE BIT(12)
#define VTA_RW_STATE_RD 0
#define VTA_RW_STATE_WR BIT(12)
#define VTA_RW_OP_EN BIT(13)
/* VLAN Read/Write Registers for (16/32 bit) */
#define B53_VLAN_WRITE_25 0x08
#define B53_VLAN_WRITE_65 0x0a
#define B53_VLAN_READ 0x0c
#define VA_MEMBER_MASK 0x3f
#define VA_UNTAG_S_25 6
#define VA_UNTAG_MASK_25 0x3f
#define VA_UNTAG_S_65 7
#define VA_UNTAG_MASK_65 0x1f
#define VA_VID_HIGH_S 12
#define VA_VID_HIGH_MASK (0xffff << VA_VID_HIGH_S)
#define VA_VALID_25 BIT(20)
#define VA_VALID_25_R4 BIT(24)
#define VA_VALID_65 BIT(14)
/* VLAN Port Default Tag (16 bit) */
#define B53_VLAN_PORT_DEF_TAG(i) (0x10 + 2 * (i))
/*************************************************************************
* Jumbo Frame Page Registers
*************************************************************************/
/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
#define B53_JUMBO_PORT_MASK 0x01
#define B53_JUMBO_PORT_MASK_63XX 0x04
#define JPM_10_100_JUMBO_EN BIT(24) /* GigE always enabled */
/* Good Frame Max Size without 802.1Q TAG (16 bit) */
#define B53_JUMBO_MAX_SIZE 0x05
#define B53_JUMBO_MAX_SIZE_63XX 0x08
#define JMS_MIN_SIZE 1518
#define JMS_MAX_SIZE 9724
/*************************************************************************
* CFP Configuration Page Registers
*************************************************************************/
/* CFP Control Register with ports map (8 bit) */
#define B53_CFP_CTRL 0x00
#endif /* !__B53_REGS_H */

331
drivers/net/dsa/b53/b53_spi.c Normal file
View file

@ -0,0 +1,331 @@
/*
* B53 register access through SPI
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
#define B53_SPI_DATA 0xf0
#define B53_SPI_STATUS 0xfe
#define B53_SPI_CMD_SPIF BIT(7)
#define B53_SPI_CMD_RACK BIT(5)
#define B53_SPI_CMD_READ 0x00
#define B53_SPI_CMD_WRITE 0x01
#define B53_SPI_CMD_NORMAL 0x60
#define B53_SPI_CMD_FAST 0x10
#define B53_SPI_PAGE_SELECT 0xff
static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val,
unsigned int len)
{
u8 txbuf[2];
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ;
txbuf[1] = reg;
return spi_write_then_read(spi, txbuf, 2, val, len);
}
static inline int b53_spi_clear_status(struct spi_device *spi)
{
unsigned int i;
u8 rxbuf;
int ret;
for (i = 0; i < 10; i++) {
ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
if (ret)
return ret;
if (!(rxbuf & B53_SPI_CMD_SPIF))
break;
mdelay(1);
}
if (i == 10)
return -EIO;
return 0;
}
static inline int b53_spi_set_page(struct spi_device *spi, u8 page)
{
u8 txbuf[3];
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = B53_SPI_PAGE_SELECT;
txbuf[2] = page;
return spi_write(spi, txbuf, sizeof(txbuf));
}
static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page)
{
int ret = b53_spi_clear_status(spi);
if (ret)
return ret;
return b53_spi_set_page(spi, page);
}
static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg)
{
u8 rxbuf;
int retry_count;
int ret;
ret = b53_spi_read_reg(spi, reg, &rxbuf, 1);
if (ret)
return ret;
for (retry_count = 0; retry_count < 10; retry_count++) {
ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
if (ret)
return ret;
if (rxbuf & B53_SPI_CMD_RACK)
break;
mdelay(1);
}
if (retry_count == 10)
return -EIO;
return 0;
}
static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data,
unsigned int len)
{
struct spi_device *spi = dev->priv;
int ret;
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
ret = b53_spi_prepare_reg_read(spi, reg);
if (ret)
return ret;
return b53_spi_read_reg(spi, B53_SPI_DATA, data, len);
}
static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
return b53_spi_read(dev, page, reg, val, 1);
}
static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 2);
if (!ret)
*val = le16_to_cpu(*val);
return ret;
}
static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 4);
if (!ret)
*val = le32_to_cpu(*val);
return ret;
}
static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
*val = 0;
ret = b53_spi_read(dev, page, reg, (u8 *)val, 6);
if (!ret)
*val = le64_to_cpu(*val);
return ret;
}
static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 8);
if (!ret)
*val = le64_to_cpu(*val);
return ret;
}
static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[3];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
txbuf[2] = value;
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[4];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le16(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[6];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le32(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[10];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le64(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf) - 2);
}
static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[10];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le64(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static struct b53_io_ops b53_spi_ops = {
.read8 = b53_spi_read8,
.read16 = b53_spi_read16,
.read32 = b53_spi_read32,
.read48 = b53_spi_read48,
.read64 = b53_spi_read64,
.write8 = b53_spi_write8,
.write16 = b53_spi_write16,
.write32 = b53_spi_write32,
.write48 = b53_spi_write48,
.write64 = b53_spi_write64,
};
static int b53_spi_probe(struct spi_device *spi)
{
struct b53_device *dev;
int ret;
dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi);
if (!dev)
return -ENOMEM;
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
ret = b53_switch_register(dev);
if (ret)
return ret;
spi_set_drvdata(spi, dev);
return 0;
}
static int b53_spi_remove(struct spi_device *spi)
{
struct b53_device *dev = spi_get_drvdata(spi);
if (dev)
b53_switch_remove(dev);
return 0;
}
static struct spi_driver b53_spi_driver = {
.driver = {
.name = "b53-switch",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = b53_spi_probe,
.remove = b53_spi_remove,
};
module_spi_driver(b53_spi_driver);
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
MODULE_DESCRIPTION("B53 SPI access driver");
MODULE_LICENSE("Dual BSD/GPL");

415
drivers/net/dsa/b53/b53_srab.c Normal file
View file

@ -0,0 +1,415 @@
/*
* B53 register access through Switch Register Access Bridge Registers
*
* Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
/* command and status register of the SRAB */
#define B53_SRAB_CMDSTAT 0x2c
#define B53_SRAB_CMDSTAT_RST BIT(2)
#define B53_SRAB_CMDSTAT_WRITE BIT(1)
#define B53_SRAB_CMDSTAT_GORDYN BIT(0)
#define B53_SRAB_CMDSTAT_PAGE 24
#define B53_SRAB_CMDSTAT_REG 16
/* high order word of write data to switch registe */
#define B53_SRAB_WD_H 0x30
/* low order word of write data to switch registe */
#define B53_SRAB_WD_L 0x34
/* high order word of read data from switch register */
#define B53_SRAB_RD_H 0x38
/* low order word of read data from switch register */
#define B53_SRAB_RD_L 0x3c
/* command and status register of the SRAB */
#define B53_SRAB_CTRLS 0x40
#define B53_SRAB_CTRLS_RCAREQ BIT(3)
#define B53_SRAB_CTRLS_RCAGNT BIT(4)
#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6)
/* the register captures interrupt pulses from the switch */
#define B53_SRAB_INTR 0x44
#define B53_SRAB_INTR_P(x) BIT(x)
#define B53_SRAB_SWITCH_PHY BIT(8)
#define B53_SRAB_1588_SYNC BIT(9)
#define B53_SRAB_IMP1_SLEEP_TIMER BIT(10)
#define B53_SRAB_P7_SLEEP_TIMER BIT(11)
#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12)
struct b53_srab_priv {
void __iomem *regs;
};
static int b53_srab_request_grant(struct b53_device *dev)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
u32 ctrls;
int i;
ctrls = readl(regs + B53_SRAB_CTRLS);
ctrls |= B53_SRAB_CTRLS_RCAREQ;
writel(ctrls, regs + B53_SRAB_CTRLS);
for (i = 0; i < 20; i++) {
ctrls = readl(regs + B53_SRAB_CTRLS);
if (ctrls & B53_SRAB_CTRLS_RCAGNT)
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static void b53_srab_release_grant(struct b53_device *dev)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
u32 ctrls;
ctrls = readl(regs + B53_SRAB_CTRLS);
ctrls &= ~B53_SRAB_CTRLS_RCAREQ;
writel(ctrls, regs + B53_SRAB_CTRLS);
}
static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int i;
u32 cmdstat;
/* set register address */
cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) |
(reg << B53_SRAB_CMDSTAT_REG) |
B53_SRAB_CMDSTAT_GORDYN |
op;
writel(cmdstat, regs + B53_SRAB_CMDSTAT);
/* check if operation completed */
for (i = 0; i < 5; ++i) {
cmdstat = readl(regs + B53_SRAB_CMDSTAT);
if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN))
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L) & 0xff;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L) & 0xffff;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
*val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
*val += (u64)readl(regs + B53_SRAB_RD_H) << 32;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel((u32)value, regs + B53_SRAB_WD_L);
writel((u16)(value >> 32), regs + B53_SRAB_WD_H);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel((u32)value, regs + B53_SRAB_WD_L);
writel((u32)(value >> 32), regs + B53_SRAB_WD_H);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static struct b53_io_ops b53_srab_ops = {
.read8 = b53_srab_read8,
.read16 = b53_srab_read16,
.read32 = b53_srab_read32,
.read48 = b53_srab_read48,
.read64 = b53_srab_read64,
.write8 = b53_srab_write8,
.write16 = b53_srab_write16,
.write32 = b53_srab_write32,
.write48 = b53_srab_write48,
.write64 = b53_srab_write64,
};
static int b53_srab_probe(struct platform_device *pdev)
{
struct b53_srab_priv *priv;
struct b53_device *dev;
struct resource *r;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(priv->regs))
return -ENOMEM;
dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv);
if (!dev)
return -ENOMEM;
platform_set_drvdata(pdev, dev);
return b53_switch_register(dev);
}
static int b53_srab_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (dev)
b53_switch_remove(dev);
return 0;
}
static const struct of_device_id b53_srab_of_match[] = {
{ .compatible = "brcm,bcm53010-srab" },
{ .compatible = "brcm,bcm53011-srab" },
{ .compatible = "brcm,bcm53012-srab" },
{ .compatible = "brcm,bcm53018-srab" },
{ .compatible = "brcm,bcm53019-srab" },
{ .compatible = "brcm,bcm5301x-srab" },
{ /* sentinel */ },
};
static struct platform_driver b53_srab_driver = {
.probe = b53_srab_probe,
.remove = b53_srab_remove,
.driver = {
.name = "b53-srab-switch",
.of_match_table = b53_srab_of_match,
},
};
module_platform_driver(b53_srab_driver);
MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver");
MODULE_LICENSE("Dual BSD/GPL");

33
include/linux/platform_data/b53.h Normal file
View file

@ -0,0 +1,33 @@
/*
* B53 platform data
*
* Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_H
#define __B53_H
#include <linux/kernel.h>
struct b53_platform_data {
u32 chip_id;
u16 enabled_ports;
/* only used by MMAP'd driver */
unsigned big_endian:1;
void __iomem *regs;
};
#endif