forked from mirrors/linux
		
	net: dsa: tag_sja1105: be dsa_loop-safe
Add support for tag_sja1105 running on non-sja1105 DSA ports, by making sure that every time we dereference dp->priv, we check the switch's dsa_switch_ops (otherwise we access a struct sja1105_port structure that is in fact something else). This adds an unconditional build-time dependency between sja1105 being built as module => tag_sja1105 must also be built as module. This was there only for PTP before. Some sane defaults must also take place when not running on sja1105 hardware. These are: - sja1105_xmit_tpid: the sja1105 driver uses different VLAN protocols depending on VLAN awareness and switch revision (when an encapsulated VLAN must be sent). Default to 0x8100. - sja1105_rcv_meta_state_machine: this aggregates PTP frames with their metadata timestamp frames. When running on non-sja1105 hardware, don't do that and accept all frames unmodified. - sja1105_defer_xmit: calls sja1105_port_deferred_xmit in sja1105_main.c which writes a management route over SPI. When not running on sja1105 hardware, bypass the SPI write and send the frame as-is. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
		
							parent
							
								
									93e271632c
								
							
						
					
					
						commit
						994d2cbb08
					
				
					 4 changed files with 48 additions and 16 deletions
				
			
		|  | @ -28,8 +28,6 @@ | |||
| #define SJA1105_UNKNOWN_MULTICAST	0x010000000000ull | ||||
| #define SJA1105_DEFAULT_VLAN		(VLAN_N_VID - 1) | ||||
| 
 | ||||
| static const struct dsa_switch_ops sja1105_switch_ops; | ||||
| 
 | ||||
| static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, | ||||
| 			     unsigned int startup_delay) | ||||
| { | ||||
|  | @ -3100,7 +3098,7 @@ static void sja1105_teardown(struct dsa_switch *ds) | |||
| 	sja1105_static_config_free(&priv->static_config); | ||||
| } | ||||
| 
 | ||||
| static const struct dsa_switch_ops sja1105_switch_ops = { | ||||
| const struct dsa_switch_ops sja1105_switch_ops = { | ||||
| 	.get_tag_protocol	= sja1105_get_tag_protocol, | ||||
| 	.setup			= sja1105_setup, | ||||
| 	.teardown		= sja1105_teardown, | ||||
|  | @ -3149,6 +3147,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = { | |||
| 	.port_bridge_tx_fwd_offload = dsa_tag_8021q_bridge_tx_fwd_offload, | ||||
| 	.port_bridge_tx_fwd_unoffload = dsa_tag_8021q_bridge_tx_fwd_unoffload, | ||||
| }; | ||||
| EXPORT_SYMBOL_GPL(sja1105_switch_ops); | ||||
| 
 | ||||
| static const struct of_device_id sja1105_dt_ids[]; | ||||
| 
 | ||||
|  |  | |||
|  | @ -88,4 +88,22 @@ static inline void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, | |||
| 
 | ||||
| #endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) */ | ||||
| 
 | ||||
| #if IS_ENABLED(CONFIG_NET_DSA_SJA1105) | ||||
| 
 | ||||
| extern const struct dsa_switch_ops sja1105_switch_ops; | ||||
| 
 | ||||
| static inline bool dsa_port_is_sja1105(struct dsa_port *dp) | ||||
| { | ||||
| 	return dp->ds->ops == &sja1105_switch_ops; | ||||
| } | ||||
| 
 | ||||
| #else | ||||
| 
 | ||||
| static inline bool dsa_port_is_sja1105(struct dsa_port *dp) | ||||
| { | ||||
| 	return false; | ||||
| } | ||||
| 
 | ||||
| #endif | ||||
| 
 | ||||
| #endif /* _NET_DSA_SJA1105_H */ | ||||
|  |  | |||
|  | @ -138,7 +138,7 @@ config NET_DSA_TAG_LAN9303 | |||
| 
 | ||||
| config NET_DSA_TAG_SJA1105 | ||||
| 	tristate "Tag driver for NXP SJA1105 switches" | ||||
| 	depends on (NET_DSA_SJA1105 && NET_DSA_SJA1105_PTP) || !NET_DSA_SJA1105 || !NET_DSA_SJA1105_PTP | ||||
| 	depends on NET_DSA_SJA1105 || !NET_DSA_SJA1105 | ||||
| 	select PACKING | ||||
| 	help | ||||
| 	  Say Y or M if you want to enable support for tagging frames with the | ||||
|  |  | |||
|  | @ -116,9 +116,14 @@ static inline bool sja1105_is_meta_frame(const struct sk_buff *skb) | |||
| } | ||||
| 
 | ||||
| /* Calls sja1105_port_deferred_xmit in sja1105_main.c */ | ||||
| static struct sk_buff *sja1105_defer_xmit(struct sja1105_port *sp, | ||||
| static struct sk_buff *sja1105_defer_xmit(struct dsa_port *dp, | ||||
| 					  struct sk_buff *skb) | ||||
| { | ||||
| 	struct sja1105_port *sp = dp->priv; | ||||
| 
 | ||||
| 	if (!dsa_port_is_sja1105(dp)) | ||||
| 		return skb; | ||||
| 
 | ||||
| 	/* Increase refcount so the kfree_skb in dsa_slave_xmit
 | ||||
| 	 * won't really free the packet. | ||||
| 	 */ | ||||
|  | @ -128,8 +133,13 @@ static struct sk_buff *sja1105_defer_xmit(struct sja1105_port *sp, | |||
| 	return NULL; | ||||
| } | ||||
| 
 | ||||
| static u16 sja1105_xmit_tpid(struct sja1105_port *sp) | ||||
| static u16 sja1105_xmit_tpid(struct dsa_port *dp) | ||||
| { | ||||
| 	struct sja1105_port *sp = dp->priv; | ||||
| 
 | ||||
| 	if (unlikely(!dsa_port_is_sja1105(dp))) | ||||
| 		return ETH_P_8021Q; | ||||
| 
 | ||||
| 	return sp->xmit_tpid; | ||||
| } | ||||
| 
 | ||||
|  | @ -155,7 +165,7 @@ static struct sk_buff *sja1105_imprecise_xmit(struct sk_buff *skb, | |||
| 	 */ | ||||
| 	tx_vid = dsa_8021q_bridge_tx_fwd_offload_vid(dp->bridge_num); | ||||
| 
 | ||||
| 	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv), tx_vid); | ||||
| 	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp), tx_vid); | ||||
| } | ||||
| 
 | ||||
| static struct sk_buff *sja1105_xmit(struct sk_buff *skb, | ||||
|  | @ -174,9 +184,9 @@ static struct sk_buff *sja1105_xmit(struct sk_buff *skb, | |||
| 	 * is the .port_deferred_xmit driver callback. | ||||
| 	 */ | ||||
| 	if (unlikely(sja1105_is_link_local(skb))) | ||||
| 		return sja1105_defer_xmit(dp->priv, skb); | ||||
| 		return sja1105_defer_xmit(dp, skb); | ||||
| 
 | ||||
| 	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv), | ||||
| 	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp), | ||||
| 			     ((pcp << VLAN_PRIO_SHIFT) | tx_vid)); | ||||
| } | ||||
| 
 | ||||
|  | @ -200,7 +210,7 @@ static struct sk_buff *sja1110_xmit(struct sk_buff *skb, | |||
| 	 * tag_8021q TX VLANs. | ||||
| 	 */ | ||||
| 	if (likely(!sja1105_is_link_local(skb))) | ||||
| 		return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv), | ||||
| 		return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp), | ||||
| 				     ((pcp << VLAN_PRIO_SHIFT) | tx_vid)); | ||||
| 
 | ||||
| 	skb_push(skb, SJA1110_HEADER_LEN); | ||||
|  | @ -265,16 +275,16 @@ static struct sk_buff | |||
| 				bool is_link_local, | ||||
| 				bool is_meta) | ||||
| { | ||||
| 	struct sja1105_port *sp; | ||||
| 	struct dsa_port *dp; | ||||
| 
 | ||||
| 	dp = dsa_slave_to_port(skb->dev); | ||||
| 	sp = dp->priv; | ||||
| 
 | ||||
| 	/* Step 1: A timestampable frame was received.
 | ||||
| 	 * Buffer it until we get its meta frame. | ||||
| 	 */ | ||||
| 	if (is_link_local) { | ||||
| 		struct dsa_port *dp = dsa_slave_to_port(skb->dev); | ||||
| 		struct sja1105_port *sp = dp->priv; | ||||
| 
 | ||||
| 		if (unlikely(!dsa_port_is_sja1105(dp))) | ||||
| 			return skb; | ||||
| 
 | ||||
| 		if (!test_bit(SJA1105_HWTS_RX_EN, &sp->data->state)) | ||||
| 			/* Do normal processing. */ | ||||
| 			return skb; | ||||
|  | @ -307,8 +317,13 @@ static struct sk_buff | |||
| 	 * frame, which serves no further purpose). | ||||
| 	 */ | ||||
| 	} else if (is_meta) { | ||||
| 		struct dsa_port *dp = dsa_slave_to_port(skb->dev); | ||||
| 		struct sja1105_port *sp = dp->priv; | ||||
| 		struct sk_buff *stampable_skb; | ||||
| 
 | ||||
| 		if (unlikely(!dsa_port_is_sja1105(dp))) | ||||
| 			return skb; | ||||
| 
 | ||||
| 		/* Drop the meta frame if we're not in the right state
 | ||||
| 		 * to process it. | ||||
| 		 */ | ||||
|  |  | |||
		Loading…
	
		Reference in a new issue
	
	 Vladimir Oltean
						Vladimir Oltean