Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

@@ -47,6 +47,7 @@ The full ID of peripheral types can be found below.
 	20	ASRC
 	21	ESAI
 	22	SSI Dual FIFO	(needs firmware ver >= 2)
+	23	Shared ASRC
 
 The third cell specifies the transfer priority as below.
 

Documentation/devicetree/bindings/dma/mpc512x-dma.txt

@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+	is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+	Each channel of this DMA controller has a peripheral request line,
+	the assignment is fixed in hardware. This one cell
+	in dmas property of a client device represents the channel number.
+
+Example:
+
+	dma0: dma@14000 {
+		compatible = "fsl,mpc5121-dma";
+		reg = <0x14000 0x1800>;
+		interrupts = <65 0x8>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.

Documentation/devicetree/bindings/dma/nbpfaxi.txt

@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible:	must be one of
+		"renesas,nbpfaxi64dmac1b4"
+		"renesas,nbpfaxi64dmac1b8"
+		"renesas,nbpfaxi64dmac1b16"
+		"renesas,nbpfaxi64dmac4b4"
+		"renesas,nbpfaxi64dmac4b8"
+		"renesas,nbpfaxi64dmac4b16"
+		"renesas,nbpfaxi64dmac8b4"
+		"renesas,nbpfaxi64dmac8b8"
+		"renesas,nbpfaxi64dmac8b16"
+- #dma-cells:	must be 2: the first integer is a terminal number, to which this
+		slave is connected, the second one is flags. Flags is a bitmask
+		with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+	dma: dma-controller@48000000 {
+		compatible = "renesas,nbpfaxi64dmac8b4";
+		reg = <0x48000000 0x400>;
+		interrupts = <0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4
+			      0 16 0x4
+			      0 17 0x4
+			      0 18 0x4
+			      0 19 0x4>;
+		#dma-cells = <2>;
+		dma-channels = <8>;
+		dma-requests = <8>;
+	};
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+		dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+			&dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+		dma-names = "rx", "tx";

Documentation/devicetree/bindings/dma/rcar-audmapp.txt

@@ -0,0 +1,29 @@
+* R-Car Audio DMAC peri peri Device Tree bindings
+
+Required properties:
+- compatible:	should be "renesas,rcar-audmapp"
+- #dma-cells:	should be <1>, see "dmas" property below
+
+Example:
+	audmapp: audio-dma-pp@0xec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
+
+* DMA client
+
+Required properties:
+- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+		where SRS/DRS values are fixed handles, specified in the SoC
+		manual as the value that would be written into the PDMACHCR.
+- dma-names:	a list of DMA channel names, one per "dmas" entry
+
+Example:
+
+	dmas = <&audmapp 0x2d00
+		&audmapp 0x3700>;
+	dma-names =  "src0_ssiu0",
+		     "dvc0_ssiu0";

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -0,0 +1,98 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
+called MID/RID.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+  interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+  channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+  connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};

Documentation/devicetree/bindings/dma/ste-dma40.txt

@@ -35,9 +35,11 @@ Required properties:
 
 Each dmas request consists of 4 cells:
   1. A phandle pointing to the DMA controller
-  2. Device Type
+  2. Device signal number, the signal line for single and burst requests
+     connected from the device to the DMA40 engine
   3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
+  4. A 32bit mask specifying; mode, direction and endianness
+     [NB: This list will grow]
         0x00000001: Mode:
                 Logical channel when unset
                 Physical channel when set
@@ -54,6 +56,74 @@ Each dmas request consists of 4 cells:
                 Normal priority when unset
                 High priority when set
 
+Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
+bidirectional, i.e. the same for RX and TX operations:
+
+0:  SPI controller 0
+1:  SD/MMC controller 0 (unused)
+2:  SD/MMC controller 1 (unused)
+3:  SD/MMC controller 2 (unused)
+4:  I2C port 1
+5:  I2C port 3
+6:  I2C port 2
+7:  I2C port 4
+8:  Synchronous Serial Port SSP0
+9:  Synchronous Serial Port SSP1
+10: Multi-Channel Display Engine MCDE RX
+11: UART port 2
+12: UART port 1
+13: UART port 0
+14: Multirate Serial Port MSP2
+15: I2C port 0
+16: USB OTG in/out endpoints 7 & 15
+17: USB OTG in/out endpoints 6 & 14
+18: USB OTG in/out endpoints 5 & 13
+19: USB OTG in/out endpoints 4 & 12
+20: SLIMbus or HSI channel 0
+21: SLIMbus or HSI channel 1
+22: SLIMbus or HSI channel 2
+23: SLIMbus or HSI channel 3
+24: Multimedia DSP SXA0
+25: Multimedia DSP SXA1
+26: Multimedia DSP SXA2
+27: Multimedia DSP SXA3
+28: SD/MM controller 2
+29: SD/MM controller 0
+30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+31: MSP port 0 or SLIMbus channel 0
+32: SD/MM controller 1
+33: SPI controller 2
+34: i2c3 RX2 TX2
+35: SPI controller 1
+36: USB OTG in/out endpoints 3 & 11
+37: USB OTG in/out endpoints 2 & 10
+38: USB OTG in/out endpoints 1 & 9
+39: USB OTG in/out endpoints 8
+40: SPI controller 3
+41: SD/MM controller 3
+42: SD/MM controller 4
+43: SD/MM controller 5
+44: Multimedia DSP SXA4
+45: Multimedia DSP SXA5
+46: SLIMbus channel 8 or Multimedia DSP SXA6
+47: SLIMbus channel 9 or Multimedia DSP SXA7
+48: Crypto Accelerator 1
+49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+50: Hash Accelerator 1 TX
+51: memcpy TX (to be used by the DMA driver for memcpy operations)
+52: SLIMbus or HSI channel 4
+53: SLIMbus or HSI channel 5
+54: SLIMbus or HSI channel 6
+55: SLIMbus or HSI channel 7
+56: memcpy (to be used by the DMA driver for memcpy operations)
+57: memcpy (to be used by the DMA driver for memcpy operations)
+58: memcpy (to be used by the DMA driver for memcpy operations)
+59: memcpy (to be used by the DMA driver for memcpy operations)
+60: memcpy (to be used by the DMA driver for memcpy operations)
+61: Crypto Accelerator 0
+62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+63: Hash Accelerator 0 TX
+
 Example:
 
 	uart@80120000 {

Documentation/devicetree/bindings/dma/sun6i-dma.txt

@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible:	Must be "allwinner,sun6i-a31-dma"
+- reg:		Should contain the registers base address and length
+- interrupts:	Should contain a reference to the interrupt used by this device
+- clocks:	Should contain a reference to the parent AHB clock
+- resets:	Should contain a reference to the reset controller asserting
+		this device in reset
+- #dma-cells :	Should be 1, a single cell holding a line request number
+
+Example:
+	dma: dma-controller@01c02000 {
+		compatible = "allwinner,sun6i-a31-dma";
+		reg = <0x01c02000 0x1000>;
+		interrupts = <0 50 4>;
+		clocks = <&ahb1_gates 6>;
+		resets = <&ahb1_rst 6>;
+		#dma-cells = <1>;
+	};
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+	compatible = "allwinner,sun6i-a31-spi";
+	reg = <0x01c6a000 0x1000>;
+	interrupts = <0 67 4>;
+	clocks = <&ahb1_gates 22>, <&spi2_clk>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 25>, <&dma 25>;
+	dma-names = "rx", "tx";
+	resets = <&ahb1_rst 22>;
+};

Documentation/dmaengine.txt

@@ -84,31 +84,32 @@ The slave DMA usage consists of following steps:
    the given transaction.
 
    Interface:
-	struct dma_async_tx_descriptor *(*chan->device->device_prep_slave_sg)(
+	struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned int sg_len, enum dma_data_direction direction,
 		unsigned long flags);
 
-	struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)(
+	struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_data_direction direction);
 
-	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+	struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
 		struct dma_chan *chan, struct dma_interleaved_template *xt,
 		unsigned long flags);
 
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.
-   The scatterlist must be mapped using the DMA struct device.  So,
+   The scatterlist must be mapped using the DMA struct device.
-   normal setup should look like this:
+   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
+   called using the DMA struct device, too.
+   So, normal setup should look like this:
 
 	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
 	if (nr_sg == 0)
 		/* error */
 
-	desc = chan->device->device_prep_slave_sg(chan, sgl, nr_sg,
+	desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
-			direction, flags);
 
    Once a descriptor has been obtained, the callback information can be
    added and the descriptor must then be submitted.  Some DMA engine
@@ -188,7 +189,7 @@ Further APIs:
    description of this API.
 
    This can be used in conjunction with dma_async_is_complete() and
-   the cookie returned from 'descriptor->submit()' to check for
+   the cookie returned from dmaengine_submit() to check for
    completion of a specific DMA transaction.
 
    Note:

arch/arm/common/edma.c

@@ -1414,6 +1414,34 @@ void edma_clear_event(unsigned channel)
 }
 EXPORT_SYMBOL(edma_clear_event);
 
+/*
+ * edma_assign_channel_eventq - move given channel to desired eventq
+ * Arguments:
+ *	channel - channel number
+ *	eventq_no - queue to move the channel
+ *
+ * Can be used to move a channel to a selected event queue.
+ */
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
+{
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_cc[ctlr]->num_channels)
+		return;
+
+	/* default to low priority queue */
+	if (eventq_no == EVENTQ_DEFAULT)
+		eventq_no = edma_cc[ctlr]->default_queue;
+	if (eventq_no >= edma_cc[ctlr]->num_tc)
+		return;
+
+	map_dmach_queue(ctlr, channel, eventq_no);
+}
+EXPORT_SYMBOL(edma_assign_channel_eventq);
+
 static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
 			      struct edma *edma_cc)
 {
@@ -1470,7 +1498,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
 	queue_priority_map[i][1] = -1;
 
 	pdata->queue_priority_mapping = queue_priority_map;
-	pdata->default_queue = 0;
+	/* Default queue has the lowest priority */
+	pdata->default_queue = i - 1;
 
 	return 0;
 }

arch/powerpc/boot/dts/mpc5121.dtsi

@@ -498,6 +498,7 @@ dma0: dma@14000 {
 			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
+			#dma-cells = <1>;
 		};
 	};
 

arch/sh/drivers/dma/dma-sh.c

@@ -25,7 +25,7 @@
  * Define the default configuration for dual address memory-memory transfer.
  * The 0x400 value represents auto-request, external->external.
  */
-#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_INDEX2VAL(XMIT_SZ_32BIT))
+#define RS_DUAL	(DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
 
 static unsigned long dma_find_base(unsigned int chan)
 {

arch/sh/include/asm/dma-register.h

@@ -13,17 +13,17 @@
 #ifndef DMA_REGISTER_H
 #define DMA_REGISTER_H
 
-/* DMA register */
+/* DMA registers */
-#define SAR	0x00
+#define SAR	0x00	/* Source Address Register */
-#define DAR	0x04
+#define DAR	0x04	/* Destination Address Register */
-#define TCR	0x08
+#define TCR	0x08	/* Transfer Count Register */
-#define CHCR	0x0C
+#define CHCR	0x0C	/* Channel Control Register */
-#define DMAOR	0x40
+#define DMAOR	0x40	/* DMA Operation Register */
 
 /* DMAOR definitions */
-#define DMAOR_AE	0x00000004
+#define DMAOR_AE	0x00000004	/* Address Error Flag */
 #define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
+#define DMAOR_DME	0x00000001	/* DMA Master Enable */
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
@@ -34,18 +34,20 @@
 #define ACK_W	0x00020000
 #define ACK_H	0x00000000
 #define ACK_L	0x00010000
-#define DM_INC	0x00004000
+#define DM_INC	0x00004000	/* Destination addresses are incremented */
-#define DM_DEC	0x00008000
+#define DM_DEC	0x00008000	/* Destination addresses are decremented */
-#define DM_FIX	0x0000c000
+#define DM_FIX	0x0000c000	/* Destination address is fixed */
-#define SM_INC	0x00001000
+#define SM_INC	0x00001000	/* Source addresses are incremented */
-#define SM_DEC	0x00002000
+#define SM_DEC	0x00002000	/* Source addresses are decremented */
-#define SM_FIX	0x00003000
+#define SM_FIX	0x00003000	/* Source address is fixed */
 #define RS_IN	0x00000200
 #define RS_OUT	0x00000300
+#define RS_AUTO	0x00000400	/* Auto Request */
+#define RS_ERS	0x00000800	/* DMA extended resource selector */
 #define TS_BLK	0x00000040
 #define TM_BUR	0x00000020
-#define CHCR_DE	0x00000001
+#define CHCR_DE	0x00000001	/* DMA Enable */
-#define CHCR_TE	0x00000002
+#define CHCR_TE	0x00000002	/* Transfer End Flag */
-#define CHCR_IE	0x00000004
+#define CHCR_IE	0x00000004	/* Interrupt Enable */
 
 #endif

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

@@ -30,62 +30,62 @@ static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
 		.addr		= 0xffe0000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x21,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
 		.addr		= 0xffe00014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
 		.addr		= 0xffe1000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x25,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
 		.addr		= 0xffe10014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x26,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
 		.addr		= 0xffe2000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x29,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
 		.addr		= 0xffe20014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SIUA_TX,
 		.addr		= 0xa454c098,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb1,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SIUA_RX,
 		.addr		= 0xa454c090,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb2,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SIUB_TX,
 		.addr		= 0xa454c09c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb5,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SIUB_RX,
 		.addr		= 0xa454c094,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb6,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
 		.addr		= 0x04ce0030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc1,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
 		.addr		= 0x04ce0030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc2,
 	},
 };

arch/sh/kernel/cpu/sh4a/setup-sh7724.c

@@ -36,122 +36,122 @@ static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
 		.addr		= 0xffe0000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x21,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
 		.addr		= 0xffe00014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
 		.addr		= 0xffe1000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x25,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
 		.addr		= 0xffe10014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x26,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
 		.addr		= 0xffe2000c,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x29,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
 		.addr		= 0xffe20014,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
 		.addr		= 0xa4e30020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2d,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
 		.addr		= 0xa4e30024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2e,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
 		.addr		= 0xa4e40020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x31,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
 		.addr		= 0xa4e40024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x32,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
 		.addr		= 0xa4e50020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x35,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
 		.addr		= 0xa4e50024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x36,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB0D0_TX,
 		.addr		= 0xA4D80100,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0x73,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB0D0_RX,
 		.addr		= 0xA4D80100,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0x73,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB0D1_TX,
 		.addr		= 0xA4D80120,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0x77,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB0D1_RX,
 		.addr		= 0xA4D80120,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0x77,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB1D0_TX,
 		.addr		= 0xA4D90100,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xab,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB1D0_RX,
 		.addr		= 0xA4D90100,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xab,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB1D1_TX,
 		.addr		= 0xA4D90120,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xaf,
 	}, {
 		.slave_id	= SHDMA_SLAVE_USB1D1_RX,
 		.addr		= 0xA4D90120,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xaf,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
 		.addr		= 0x04ce0030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc1,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
 		.addr		= 0x04ce0030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc2,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
 		.addr		= 0x04cf0030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc9,
 	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
 		.addr		= 0x04cf0030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.chcr		= DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xca,
 	},
 };

arch/sh/kernel/cpu/sh4a/setup-sh7757.c

@@ -123,28 +123,28 @@ static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SDHI_TX,
 		.addr		= 0x1fe50030,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc5,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SDHI_RX,
 		.addr		= 0x1fe50030,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc6,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
 		.addr		= 0x1fcb0034,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xd3,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
 		.addr		= 0x1fcb0034,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_32BIT),
 		.mid_rid	= 0xd7,
 	},
@@ -154,56 +154,56 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
 		.addr		= 0x1f4b000c,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x21,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
 		.addr		= 0x1f4b0014,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
 		.addr		= 0x1f4c000c,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x29,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
 		.addr		= 0x1f4c0014,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
 		.addr		= 0x1f4d000c,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x41,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
 		.addr		= 0x1f4d0014,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x42,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RSPI_TX,
 		.addr		= 0xfe480004,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc1,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RSPI_RX,
 		.addr		= 0xfe480004,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xc2,
 	},
@@ -213,70 +213,70 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC0_TX,
 		.addr		= 0x1e500012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x21,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC0_RX,
 		.addr		= 0x1e500013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC1_TX,
 		.addr		= 0x1e510012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x29,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC1_RX,
 		.addr		= 0x1e510013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC2_TX,
 		.addr		= 0x1e520012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xa1,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC2_RX,
 		.addr		= 0x1e520013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xa2,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC3_TX,
 		.addr		= 0x1e530012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xa9,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC3_RX,
 		.addr		= 0x1e530013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xaf,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC4_TX,
 		.addr		= 0x1e540012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xc5,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC4_RX,
 		.addr		= 0x1e540013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xc6,
 	},
@@ -286,70 +286,70 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC5_TX,
 		.addr		= 0x1e550012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x21,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC5_RX,
 		.addr		= 0x1e550013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC6_TX,
 		.addr		= 0x1e560012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x29,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC6_RX,
 		.addr		= 0x1e560013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC7_TX,
 		.addr		= 0x1e570012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x41,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC7_RX,
 		.addr		= 0x1e570013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x42,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC8_TX,
 		.addr		= 0x1e580012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x45,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC8_RX,
 		.addr		= 0x1e580013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x46,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC9_TX,
 		.addr		= 0x1e590012,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= SM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x51,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC9_RX,
 		.addr		= 0x1e590013,
-		.chcr		= DM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | RS_ERS | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x52,
 	},

drivers/dma/Kconfig

@@ -393,6 +393,22 @@ config XILINX_VDMA
 	  channels, Memory Mapped to Stream (MM2S) and Stream to
 	  Memory Mapped (S2MM) for the data transfers.
 
+config DMA_SUN6I
+	tristate "Allwinner A31 SoCs DMA support"
+	depends on MACH_SUN6I || COMPILE_TEST
+	depends on RESET_CONTROLLER
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the DMA engine for Allwinner A31 SoCs.
+
+config NBPFAXI_DMA
+	tristate "Renesas Type-AXI NBPF DMA support"
+	select DMA_ENGINE
+	depends on ARM || COMPILE_TEST
+	help
+	  Support for "Type-AXI" NBPF DMA IPs from Renesas
+
 config DMA_ENGINE
 	bool
 
@@ -406,6 +422,7 @@ config DMA_ACPI
 config DMA_OF
 	def_bool y
 	depends on OF
+	select DMA_ENGINE
 
 comment "DMA Clients"
 	depends on DMA_ENGINE

drivers/dma/Makefile

@@ -1,5 +1,5 @@
-ccflags-$(CONFIG_DMADEVICES_DEBUG)  := -DDEBUG
+subdir-ccflags-$(CONFIG_DMADEVICES_DEBUG)  := -DDEBUG
-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
+subdir-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
 
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
 obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
@@ -48,3 +48,5 @@ obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
 obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
 obj-y += xilinx/
 obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
+obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
+obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o

drivers/dma/TODO

@@ -7,7 +7,6 @@ TODO for slave dma
 	- imx-dma
 	- imx-sdma
 	- mxs-dma.c
-	- dw_dmac
 	- intel_mid_dma
 4. Check other subsystems for dma drivers and merge/move to dmaengine
 5. Remove dma_slave_config's dma direction.

drivers/dma/amba-pl08x.c

@@ -1040,7 +1040,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 		if (early_bytes) {
 			dev_vdbg(&pl08x->adev->dev,
-				"%s byte width LLIs (remain 0x%08x)\n",
+				"%s byte width LLIs (remain 0x%08zx)\n",
 				__func__, bd.remainder);
 			prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
 				num_llis++, &total_bytes);
@@ -1653,7 +1653,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
@@ -1662,7 +1662,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
 	dma_addr_t slave_addr;
 
 	dev_dbg(&pl08x->adev->dev,
-		"%s prepare cyclic transaction of %d/%d bytes %s %s\n",
+		"%s prepare cyclic transaction of %zd/%zd bytes %s %s\n",
 		__func__, period_len, buf_len,
 		direction == DMA_MEM_TO_DEV ? "to" : "from",
 		plchan->name);

drivers/dma/at_hdmac.c

@@ -294,14 +294,16 @@ static int atc_get_bytes_left(struct dma_chan *chan)
 			ret = -EINVAL;
 			goto out;
 		}
-		atchan->remain_desc -= (desc_cur->lli.ctrla & ATC_BTSIZE_MAX)
+
-						<< (desc_first->tx_width);
+		count = (desc_cur->lli.ctrla & ATC_BTSIZE_MAX)
-		if (atchan->remain_desc < 0) {
+			<< desc_first->tx_width;
+		if (atchan->remain_desc < count) {
 			ret = -EINVAL;
 			goto out;
-		} else {
-			ret = atchan->remain_desc;
 		}
+
+		atchan->remain_desc -= count;
+		ret = atchan->remain_desc;
 	} else {
 		/*
 		 * Get residual bytes when current
@@ -893,12 +895,11 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
  * @period_len: number of bytes for each period
  * @direction: transfer direction, to or from device
  * @flags: tx descriptor status flags
- * @context: transfer context (ignored)
  */
 static struct dma_async_tx_descriptor *
 atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
 	struct at_dma_slave	*atslave = chan->private;

drivers/dma/bcm2835-dma.c

@@ -335,7 +335,7 @@ static void bcm2835_dma_issue_pending(struct dma_chan *chan)
 static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags, void *context)
+	unsigned long flags)
 {
 	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
 	enum dma_slave_buswidth dev_width;

drivers/dma/dma-jz4740.c

@@ -433,7 +433,7 @@ static struct dma_async_tx_descriptor *jz4740_dma_prep_slave_sg(
 static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic(
 	struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags, void *context)
+	unsigned long flags)
 {
 	struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
 	struct jz4740_dma_desc *desc;
@@ -614,4 +614,4 @@ module_platform_driver(jz4740_dma_driver);
 
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 MODULE_DESCRIPTION("JZ4740 DMA driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");

drivers/dma/dw/core.c

@@ -279,6 +279,19 @@ static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first)
 	channel_set_bit(dw, CH_EN, dwc->mask);
 }
 
+static void dwc_dostart_first_queued(struct dw_dma_chan *dwc)
+{
+	struct dw_desc *desc;
+
+	if (list_empty(&dwc->queue))
+		return;
+
+	list_move(dwc->queue.next, &dwc->active_list);
+	desc = dwc_first_active(dwc);
+	dev_vdbg(chan2dev(&dwc->chan), "%s: started %u\n", __func__, desc->txd.cookie);
+	dwc_dostart(dwc, desc);
+}
+
 /*----------------------------------------------------------------------*/
 
 static void
@@ -335,10 +348,7 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc)
 	 * the completed ones.
 	 */
 	list_splice_init(&dwc->active_list, &list);
-	if (!list_empty(&dwc->queue)) {
+	dwc_dostart_first_queued(dwc);
-		list_move(dwc->queue.next, &dwc->active_list);
-		dwc_dostart(dwc, dwc_first_active(dwc));
-	}
 
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -467,10 +477,7 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc)
 	/* Try to continue after resetting the channel... */
 	dwc_chan_disable(dw, dwc);
 
-	if (!list_empty(&dwc->queue)) {
+	dwc_dostart_first_queued(dwc);
-		list_move(dwc->queue.next, &dwc->active_list);
-		dwc_dostart(dwc, dwc_first_active(dwc));
-	}
 	spin_unlock_irqrestore(&dwc->lock, flags);
 }
 
@@ -677,17 +684,9 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
 	 * possible, perhaps even appending to those already submitted
 	 * for DMA. But this is hard to do in a race-free manner.
 	 */
-	if (list_empty(&dwc->active_list)) {
-		dev_vdbg(chan2dev(tx->chan), "%s: started %u\n", __func__,
-				desc->txd.cookie);
-		list_add_tail(&desc->desc_node, &dwc->active_list);
-		dwc_dostart(dwc, dwc_first_active(dwc));
-	} else {
-		dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__,
-				desc->txd.cookie);
 
+	dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, desc->txd.cookie);
 	list_add_tail(&desc->desc_node, &dwc->queue);
-	}
 
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -1092,9 +1091,12 @@ dwc_tx_status(struct dma_chan *chan,
 static void dwc_issue_pending(struct dma_chan *chan)
 {
 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	unsigned long		flags;
 
-	if (!list_empty(&dwc->queue))
+	spin_lock_irqsave(&dwc->lock, flags);
-		dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
+	if (list_empty(&dwc->active_list))
+		dwc_dostart_first_queued(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
 }
 
 static int dwc_alloc_chan_resources(struct dma_chan *chan)

drivers/dma/edma.c

@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <linux/platform_data/edma.h>
 
@@ -256,8 +257,13 @@ static int edma_terminate_all(struct edma_chan *echan)
 	 * echan->edesc is NULL and exit.)
 	 */
 	if (echan->edesc) {
+		int cyclic = echan->edesc->cyclic;
 		echan->edesc = NULL;
 		edma_stop(echan->ch_num);
+		/* Move the cyclic channel back to default queue */
+		if (cyclic)
+			edma_assign_channel_eventq(echan->ch_num,
+						   EVENTQ_DEFAULT);
 	}
 
 	vchan_get_all_descriptors(&echan->vchan, &head);
@@ -592,7 +598,7 @@ struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
 static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long tx_flags, void *context)
+	unsigned long tx_flags)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
 	struct device *dev = chan->device->dev;
@@ -718,12 +724,15 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		edesc->absync = ret;
 
 		/*
-		 * Enable interrupts for every period because callback
+		 * Enable period interrupt only if it is requested
-		 * has to be called for every period.
 		 */
+		if (tx_flags & DMA_PREP_INTERRUPT)
 			edesc->pset[i].param.opt |= TCINTEN;
 	}
 
+	/* Place the cyclic channel to highest priority queue */
+	edma_assign_channel_eventq(echan->ch_num, EVENTQ_0);
+
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
 
@@ -993,7 +1002,7 @@ static int edma_dma_device_slave_caps(struct dma_chan *dchan,
 	caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
 	caps->cmd_pause = true;
 	caps->cmd_terminate = true;
-	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 
 	return 0;
 }
@@ -1040,7 +1049,7 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
 		dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
-		return -EIO;
+		return ecc->dummy_slot;
 	}
 
 	dma_cap_zero(ecc->dma_slave.cap_mask);
@@ -1125,7 +1134,7 @@ static int edma_init(void)
 		}
 	}
 
-	if (EDMA_CTLRS == 2) {
+	if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
 		pdev1 = platform_device_register_full(&edma_dev_info1);
 		if (IS_ERR(pdev1)) {
 			platform_driver_unregister(&edma_driver);

drivers/dma/ep93xx_dma.c

@@ -1092,7 +1092,6 @@ ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
  * @period_len: length of a single period
  * @dir: direction of the operation
  * @flags: tx descriptor status flags
- * @context: operation context (ignored)
  *
  * Prepares a descriptor for cyclic DMA operation. This means that once the
  * descriptor is submitted, we will be submitting in a @period_len sized
@@ -1105,8 +1104,7 @@ ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 static struct dma_async_tx_descriptor *
 ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
 			   size_t buf_len, size_t period_len,
-			   enum dma_transfer_direction dir, unsigned long flags,
+			   enum dma_transfer_direction dir, unsigned long flags)
-			   void *context)
 {
 	struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan);
 	struct ep93xx_dma_desc *desc, *first;

drivers/dma/fsl-edma.c

@@ -248,11 +248,12 @@ static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
 			unsigned int slot, bool enable)
 {
 	u32 ch = fsl_chan->vchan.chan.chan_id;
-	void __iomem *muxaddr = fsl_chan->edma->muxbase[ch / DMAMUX_NR];
+	void __iomem *muxaddr;
 	unsigned chans_per_mux, ch_off;
 
 	chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
 	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
 
 	if (enable)
 		edma_writeb(fsl_chan->edma,
@@ -516,7 +517,7 @@ static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
 static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
 	struct fsl_edma_desc *fsl_desc;
@@ -724,6 +725,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 {
 	struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
 	struct dma_chan *chan, *_chan;
+	unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR;
 
 	if (dma_spec->args_count != 2)
 		return NULL;
@@ -732,7 +734,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 	list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) {
 		if (chan->client_count)
 			continue;
-		if ((chan->chan_id / DMAMUX_NR) == dma_spec->args[0]) {
+		if ((chan->chan_id / chans_per_mux) == dma_spec->args[0]) {
 			chan = dma_get_slave_channel(chan);
 			if (chan) {
 				chan->device->privatecnt++;

drivers/dma/fsldma.c

@@ -396,10 +396,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	struct fsldma_chan *chan = to_fsl_chan(tx->chan);
 	struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
 	struct fsl_desc_sw *child;
-	unsigned long flags;
 	dma_cookie_t cookie = -EINVAL;
 
-	spin_lock_irqsave(&chan->desc_lock, flags);
+	spin_lock_bh(&chan->desc_lock);
+
+#ifdef CONFIG_PM
+	if (unlikely(chan->pm_state != RUNNING)) {
+		chan_dbg(chan, "cannot submit due to suspend\n");
+		spin_unlock_bh(&chan->desc_lock);
+		return -1;
+	}
+#endif
 
 	/*
 	 * assign cookies to all of the software descriptors
@@ -412,7 +419,7 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	/* put this transaction onto the tail of the pending queue */
 	append_ld_queue(chan, desc);
 
-	spin_unlock_irqrestore(&chan->desc_lock, flags);
+	spin_unlock_bh(&chan->desc_lock);
 
 	return cookie;
 }
@@ -458,6 +465,88 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan)
 	return desc;
 }
 
+/**
+ * fsldma_clean_completed_descriptor - free all descriptors which
+ * has been completed and acked
+ * @chan: Freescale DMA channel
+ *
+ * This function is used on all completed and acked descriptors.
+ * All descriptors should only be freed in this function.
+ */
+static void fsldma_clean_completed_descriptor(struct fsldma_chan *chan)
+{
+	struct fsl_desc_sw *desc, *_desc;
+
+	/* Run the callback for each descriptor, in order */
+	list_for_each_entry_safe(desc, _desc, &chan->ld_completed, node)
+		if (async_tx_test_ack(&desc->async_tx))
+			fsl_dma_free_descriptor(chan, desc);
+}
+
+/**
+ * fsldma_run_tx_complete_actions - cleanup a single link descriptor
+ * @chan: Freescale DMA channel
+ * @desc: descriptor to cleanup and free
+ * @cookie: Freescale DMA transaction identifier
+ *
+ * This function is used on a descriptor which has been executed by the DMA
+ * controller. It will run any callbacks, submit any dependencies.
+ */
+static dma_cookie_t fsldma_run_tx_complete_actions(struct fsldma_chan *chan,
+		struct fsl_desc_sw *desc, dma_cookie_t cookie)
+{
+	struct dma_async_tx_descriptor *txd = &desc->async_tx;
+	dma_cookie_t ret = cookie;
+
+	BUG_ON(txd->cookie < 0);
+
+	if (txd->cookie > 0) {
+		ret = txd->cookie;
+
+		/* Run the link descriptor callback function */
+		if (txd->callback) {
+			chan_dbg(chan, "LD %p callback\n", desc);
+			txd->callback(txd->callback_param);
+		}
+	}
+
+	/* Run any dependencies */
+	dma_run_dependencies(txd);
+
+	return ret;
+}
+
+/**
+ * fsldma_clean_running_descriptor - move the completed descriptor from
+ * ld_running to ld_completed
+ * @chan: Freescale DMA channel
+ * @desc: the descriptor which is completed
+ *
+ * Free the descriptor directly if acked by async_tx api, or move it to
+ * queue ld_completed.
+ */
+static void fsldma_clean_running_descriptor(struct fsldma_chan *chan,
+		struct fsl_desc_sw *desc)
+{
+	/* Remove from the list of transactions */
+	list_del(&desc->node);
+
+	/*
+	 * the client is allowed to attach dependent operations
+	 * until 'ack' is set
+	 */
+	if (!async_tx_test_ack(&desc->async_tx)) {
+		/*
+		 * Move this descriptor to the list of descriptors which is
+		 * completed, but still awaiting the 'ack' bit to be set.
+		 */
+		list_add_tail(&desc->node, &chan->ld_completed);
+		return;
+	}
+
+	dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys);
+}
+
 /**
  * fsl_chan_xfer_ld_queue - transfer any pending transactions
  * @chan : Freescale DMA channel
@@ -526,31 +615,58 @@ static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan)
 }
 
 /**
- * fsldma_cleanup_descriptor - cleanup and free a single link descriptor
+ * fsldma_cleanup_descriptors - cleanup link descriptors which are completed
+ * and move them to ld_completed to free until flag 'ack' is set
  * @chan: Freescale DMA channel
- * @desc: descriptor to cleanup and free
  *
- * This function is used on a descriptor which has been executed by the DMA
+ * This function is used on descriptors which have been executed by the DMA
- * controller. It will run any callbacks, submit any dependencies, and then
+ * controller. It will run any callbacks, submit any dependencies, then
- * free the descriptor.
+ * free these descriptors if flag 'ack' is set.
  */
-static void fsldma_cleanup_descriptor(struct fsldma_chan *chan,
+static void fsldma_cleanup_descriptors(struct fsldma_chan *chan)
-				      struct fsl_desc_sw *desc)
 {
-	struct dma_async_tx_descriptor *txd = &desc->async_tx;
+	struct fsl_desc_sw *desc, *_desc;
+	dma_cookie_t cookie = 0;
+	dma_addr_t curr_phys = get_cdar(chan);
+	int seen_current = 0;
 
-	/* Run the link descriptor callback function */
+	fsldma_clean_completed_descriptor(chan);
-	if (txd->callback) {
+
-		chan_dbg(chan, "LD %p callback\n", desc);
+	/* Run the callback for each descriptor, in order */
-		txd->callback(txd->callback_param);
+	list_for_each_entry_safe(desc, _desc, &chan->ld_running, node) {
+		/*
+		 * do not advance past the current descriptor loaded into the
+		 * hardware channel, subsequent descriptors are either in
+		 * process or have not been submitted
+		 */
+		if (seen_current)
+			break;
+
+		/*
+		 * stop the search if we reach the current descriptor and the
+		 * channel is busy
+		 */
+		if (desc->async_tx.phys == curr_phys) {
+			seen_current = 1;
+			if (!dma_is_idle(chan))
+				break;
 		}
 
-	/* Run any dependencies */
+		cookie = fsldma_run_tx_complete_actions(chan, desc, cookie);
-	dma_run_dependencies(txd);
 
-	dma_descriptor_unmap(txd);
+		fsldma_clean_running_descriptor(chan, desc);
-	chan_dbg(chan, "LD %p free\n", desc);
+	}
-	dma_pool_free(chan->desc_pool, desc, txd->phys);
+
+	/*
+	 * Start any pending transactions automatically
+	 *
+	 * In the ideal case, we keep the DMA controller busy while we go
+	 * ahead and free the descriptors below.
+	 */
+	fsl_chan_xfer_ld_queue(chan);
+
+	if (cookie > 0)
+		chan->common.completed_cookie = cookie;
 }
 
 /**
@@ -617,13 +733,14 @@ static void fsldma_free_desc_list_reverse(struct fsldma_chan *chan,
 static void fsl_dma_free_chan_resources(struct dma_chan *dchan)
 {
 	struct fsldma_chan *chan = to_fsl_chan(dchan);
-	unsigned long flags;
 
 	chan_dbg(chan, "free all channel resources\n");
-	spin_lock_irqsave(&chan->desc_lock, flags);
+	spin_lock_bh(&chan->desc_lock);
+	fsldma_cleanup_descriptors(chan);
 	fsldma_free_desc_list(chan, &chan->ld_pending);
 	fsldma_free_desc_list(chan, &chan->ld_running);
-	spin_unlock_irqrestore(&chan->desc_lock, flags);
+	fsldma_free_desc_list(chan, &chan->ld_completed);
+	spin_unlock_bh(&chan->desc_lock);
 
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
@@ -842,7 +959,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
 {
 	struct dma_slave_config *config;
 	struct fsldma_chan *chan;
-	unsigned long flags;
 	int size;
 
 	if (!dchan)
@@ -852,7 +968,7 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
 
 	switch (cmd) {
 	case DMA_TERMINATE_ALL:
-		spin_lock_irqsave(&chan->desc_lock, flags);
+		spin_lock_bh(&chan->desc_lock);
 
 		/* Halt the DMA engine */
 		dma_halt(chan);
@@ -860,9 +976,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
 		/* Remove and free all of the descriptors in the LD queue */
 		fsldma_free_desc_list(chan, &chan->ld_pending);
 		fsldma_free_desc_list(chan, &chan->ld_running);
+		fsldma_free_desc_list(chan, &chan->ld_completed);
 		chan->idle = true;
 
-		spin_unlock_irqrestore(&chan->desc_lock, flags);
+		spin_unlock_bh(&chan->desc_lock);
 		return 0;
 
 	case DMA_SLAVE_CONFIG:
@@ -904,11 +1021,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
 static void fsl_dma_memcpy_issue_pending(struct dma_chan *dchan)
 {
 	struct fsldma_chan *chan = to_fsl_chan(dchan);
-	unsigned long flags;
 
-	spin_lock_irqsave(&chan->desc_lock, flags);
+	spin_lock_bh(&chan->desc_lock);
 	fsl_chan_xfer_ld_queue(chan);
-	spin_unlock_irqrestore(&chan->desc_lock, flags);
+	spin_unlock_bh(&chan->desc_lock);
 }
 
 /**
@@ -919,6 +1035,17 @@ static enum dma_status fsl_tx_status(struct dma_chan *dchan,
 					dma_cookie_t cookie,
 					struct dma_tx_state *txstate)
 {
+	struct fsldma_chan *chan = to_fsl_chan(dchan);
+	enum dma_status ret;
+
+	ret = dma_cookie_status(dchan, cookie, txstate);
+	if (ret == DMA_COMPLETE)
+		return ret;
+
+	spin_lock_bh(&chan->desc_lock);
+	fsldma_cleanup_descriptors(chan);
+	spin_unlock_bh(&chan->desc_lock);
+
 	return dma_cookie_status(dchan, cookie, txstate);
 }
 
@@ -996,52 +1123,18 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data)
 static void dma_do_tasklet(unsigned long data)
 {
 	struct fsldma_chan *chan = (struct fsldma_chan *)data;
-	struct fsl_desc_sw *desc, *_desc;
-	LIST_HEAD(ld_cleanup);
-	unsigned long flags;
 
 	chan_dbg(chan, "tasklet entry\n");
 
-	spin_lock_irqsave(&chan->desc_lock, flags);
+	spin_lock_bh(&chan->desc_lock);
-
-	/* update the cookie if we have some descriptors to cleanup */
-	if (!list_empty(&chan->ld_running)) {
-		dma_cookie_t cookie;
-
-		desc = to_fsl_desc(chan->ld_running.prev);
-		cookie = desc->async_tx.cookie;
-		dma_cookie_complete(&desc->async_tx);
-
-		chan_dbg(chan, "completed_cookie=%d\n", cookie);
-	}
-
-	/*
-	 * move the descriptors to a temporary list so we can drop the lock
-	 * during the entire cleanup operation
-	 */
-	list_splice_tail_init(&chan->ld_running, &ld_cleanup);
 
 	/* the hardware is now idle and ready for more */
 	chan->idle = true;
 
-	/*
+	/* Run all cleanup for descriptors which have been completed */
-	 * Start any pending transactions automatically
+	fsldma_cleanup_descriptors(chan);
-	 *
-	 * In the ideal case, we keep the DMA controller busy while we go
-	 * ahead and free the descriptors below.
-	 */
-	fsl_chan_xfer_ld_queue(chan);
-	spin_unlock_irqrestore(&chan->desc_lock, flags);
 
-	/* Run the callback for each descriptor, in order */
+	spin_unlock_bh(&chan->desc_lock);
-	list_for_each_entry_safe(desc, _desc, &ld_cleanup, node) {
-
-		/* Remove from the list of transactions */
-		list_del(&desc->node);
-
-		/* Run all cleanup for this descriptor */
-		fsldma_cleanup_descriptor(chan, desc);
-	}
 
 	chan_dbg(chan, "tasklet exit\n");
 }
@@ -1225,7 +1318,11 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
 	spin_lock_init(&chan->desc_lock);
 	INIT_LIST_HEAD(&chan->ld_pending);
 	INIT_LIST_HEAD(&chan->ld_running);
+	INIT_LIST_HEAD(&chan->ld_completed);
 	chan->idle = true;
+#ifdef CONFIG_PM
+	chan->pm_state = RUNNING;
+#endif
 
 	chan->common.device = &fdev->common;
 	dma_cookie_init(&chan->common);
@@ -1365,6 +1462,69 @@ static int fsldma_of_remove(struct platform_device *op)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int fsldma_suspend_late(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct fsldma_device *fdev = platform_get_drvdata(pdev);
+	struct fsldma_chan *chan;
+	int i;
+
+	for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) {
+		chan = fdev->chan[i];
+		if (!chan)
+			continue;
+
+		spin_lock_bh(&chan->desc_lock);
+		if (unlikely(!chan->idle))
+			goto out;
+		chan->regs_save.mr = get_mr(chan);
+		chan->pm_state = SUSPENDED;
+		spin_unlock_bh(&chan->desc_lock);
+	}
+	return 0;
+
+out:
+	for (; i >= 0; i--) {
+		chan = fdev->chan[i];
+		if (!chan)
+			continue;
+		chan->pm_state = RUNNING;
+		spin_unlock_bh(&chan->desc_lock);
+	}
+	return -EBUSY;
+}
+
+static int fsldma_resume_early(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct fsldma_device *fdev = platform_get_drvdata(pdev);
+	struct fsldma_chan *chan;
+	u32 mode;
+	int i;
+
+	for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) {
+		chan = fdev->chan[i];
+		if (!chan)
+			continue;
+
+		spin_lock_bh(&chan->desc_lock);
+		mode = chan->regs_save.mr
+			& ~FSL_DMA_MR_CS & ~FSL_DMA_MR_CC & ~FSL_DMA_MR_CA;
+		set_mr(chan, mode);
+		chan->pm_state = RUNNING;
+		spin_unlock_bh(&chan->desc_lock);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops fsldma_pm_ops = {
+	.suspend_late	= fsldma_suspend_late,
+	.resume_early	= fsldma_resume_early,
+};
+#endif
+
 static const struct of_device_id fsldma_of_ids[] = {
 	{ .compatible = "fsl,elo3-dma", },
 	{ .compatible = "fsl,eloplus-dma", },
@@ -1377,6 +1537,9 @@ static struct platform_driver fsldma_of_driver = {
 		.name = "fsl-elo-dma",
 		.owner = THIS_MODULE,
 		.of_match_table = fsldma_of_ids,
+#ifdef CONFIG_PM
+		.pm = &fsldma_pm_ops,
+#endif
 	},
 	.probe = fsldma_of_probe,
 	.remove = fsldma_of_remove,

drivers/dma/fsldma.h

@@ -134,12 +134,36 @@ struct fsldma_device {
 #define FSL_DMA_CHAN_PAUSE_EXT	0x00001000
 #define FSL_DMA_CHAN_START_EXT	0x00002000
 
+#ifdef CONFIG_PM
+struct fsldma_chan_regs_save {
+	u32 mr;
+};
+
+enum fsldma_pm_state {
+	RUNNING = 0,
+	SUSPENDED,
+};
+#endif
+
 struct fsldma_chan {
 	char name[8];			/* Channel name */
 	struct fsldma_chan_regs __iomem *regs;
 	spinlock_t desc_lock;		/* Descriptor operation lock */
-	struct list_head ld_pending;	/* Link descriptors queue */
+	/*
-	struct list_head ld_running;	/* Link descriptors queue */
+	 * Descriptors which are queued to run, but have not yet been
+	 * submitted to the hardware for execution
+	 */
+	struct list_head ld_pending;
+	/*
+	 * Descriptors which are currently being executed by the hardware
+	 */
+	struct list_head ld_running;
+	/*
+	 * Descriptors which have finished execution by the hardware. These
+	 * descriptors have already had their cleanup actions run. They are
+	 * waiting for the ACK bit to be set by the async_tx API.
+	 */
+	struct list_head ld_completed;	/* Link descriptors queue */
 	struct dma_chan common;		/* DMA common channel */
 	struct dma_pool *desc_pool;	/* Descriptors pool */
 	struct device *dev;		/* Channel device */
@@ -148,6 +172,10 @@ struct fsldma_chan {
 	struct tasklet_struct tasklet;
 	u32 feature;
 	bool idle;			/* DMA controller is idle */
+#ifdef CONFIG_PM
+	struct fsldma_chan_regs_save regs_save;
+	enum fsldma_pm_state pm_state;
+#endif
 
 	void (*toggle_ext_pause)(struct fsldma_chan *fsl_chan, int enable);
 	void (*toggle_ext_start)(struct fsldma_chan *fsl_chan, int enable);

drivers/dma/imx-dma.c

@@ -866,7 +866,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg(
 static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct imxdma_channel *imxdmac = to_imxdma_chan(chan);
 	struct imxdma_engine *imxdma = imxdmac->imxdma;

drivers/dma/imx-sdma.c

@@ -271,6 +271,7 @@ struct sdma_channel {
 	unsigned int			chn_count;
 	unsigned int			chn_real_count;
 	struct tasklet_struct		tasklet;
+	struct imx_dma_data		data;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -749,6 +750,11 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
 		per_2_per = sdma->script_addrs->per_2_per_addr;
 		break;
+	case IMX_DMATYPE_ASRC_SP:
+		per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
+		per_2_per = sdma->script_addrs->per_2_per_addr;
+		break;
 	case IMX_DMATYPE_MSHC:
 		per_2_emi = sdma->script_addrs->mshc_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->mcu_2_mshc_addr;
@@ -911,14 +917,13 @@ static int sdma_request_channel(struct sdma_channel *sdmac)
 	int channel = sdmac->channel;
 	int ret = -EBUSY;
 
-	sdmac->bd = dma_alloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, GFP_KERNEL);
+	sdmac->bd = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys,
+					GFP_KERNEL);
 	if (!sdmac->bd) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	memset(sdmac->bd, 0, PAGE_SIZE);
-
 	sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys;
 	sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
 
@@ -1120,7 +1125,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
 static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	struct sdma_engine *sdma = sdmac->sdma;
@@ -1414,12 +1419,14 @@ static int __init sdma_init(struct sdma_engine *sdma)
 
 static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param)
 {
+	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	struct imx_dma_data *data = fn_param;
 
 	if (!imx_dma_is_general_purpose(chan))
 		return false;
 
-	chan->private = data;
+	sdmac->data = *data;
+	chan->private = &sdmac->data;
 
 	return true;
 }

drivers/dma/ipu/ipu_idmac.c

@@ -1532,11 +1532,17 @@ static int idmac_alloc_chan_resources(struct dma_chan *chan)
 #ifdef DEBUG
 	if (chan->chan_id == IDMAC_IC_7) {
 		ic_sof = ipu_irq_map(69);
-		if (ic_sof > 0)
+		if (ic_sof > 0) {
-			request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan);
+			ret = request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan);
+			if (ret)
+				dev_err(&chan->dev->device, "request irq failed for IC SOF");
+		}
 		ic_eof = ipu_irq_map(70);
-		if (ic_eof > 0)
+		if (ic_eof > 0) {
-			request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan);
+			ret = request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan);
+			if (ret)
+				dev_err(&chan->dev->device, "request irq failed for IC EOF");
+		}
 	}
 #endif
 

drivers/dma/mmp_pdma.c

@@ -601,7 +601,7 @@ static struct dma_async_tx_descriptor *
 mmp_pdma_prep_dma_cyclic(struct dma_chan *dchan,
 			 dma_addr_t buf_addr, size_t len, size_t period_len,
 			 enum dma_transfer_direction direction,
-			 unsigned long flags, void *context)
+			 unsigned long flags)
 {
 	struct mmp_pdma_chan *chan;
 	struct mmp_pdma_desc_sw *first = NULL, *prev = NULL, *new;

drivers/dma/mmp_tdma.c

@@ -389,7 +389,7 @@ struct mmp_tdma_desc *mmp_tdma_alloc_descriptor(struct mmp_tdma_chan *tdmac)
 static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct mmp_tdma_chan *tdmac = to_mmp_tdma_chan(chan);
 	struct mmp_tdma_desc *desc;

drivers/dma/mpc512x_dma.c

@@ -53,6 +53,7 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/of_dma.h>
 #include <linux/of_platform.h>
 
 #include <linux/random.h>
@@ -1036,7 +1037,15 @@ static int mpc_dma_probe(struct platform_device *op)
 	if (retval)
 		goto err_free2;
 
-	return retval;
+	/* Register with OF helpers for DMA lookups (nonfatal) */
+	if (dev->of_node) {
+		retval = of_dma_controller_register(dev->of_node,
+						of_dma_xlate_by_chan_id, mdma);
+		if (retval)
+			dev_warn(dev, "Could not register for OF lookup\n");
+	}
+
+	return 0;
 
 err_free2:
 	if (mdma->is_mpc8308)
@@ -1057,6 +1066,8 @@ static int mpc_dma_remove(struct platform_device *op)
 	struct device *dev = &op->dev;
 	struct mpc_dma *mdma = dev_get_drvdata(dev);
 
+	if (dev->of_node)
+		of_dma_controller_free(dev->of_node);
 	dma_async_device_unregister(&mdma->dma);
 	if (mdma->is_mpc8308) {
 		free_irq(mdma->irq2, mdma);

drivers/dma/mxs-dma.c

@@ -413,16 +413,14 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
 	int ret;
 
-	mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev,
+	mxs_chan->ccw = dma_zalloc_coherent(mxs_dma->dma_device.dev,
-				CCW_BLOCK_SIZE, &mxs_chan->ccw_phys,
+					    CCW_BLOCK_SIZE,
-				GFP_KERNEL);
+					    &mxs_chan->ccw_phys, GFP_KERNEL);
 	if (!mxs_chan->ccw) {
 		ret = -ENOMEM;
 		goto err_alloc;
 	}
 
-	memset(mxs_chan->ccw, 0, CCW_BLOCK_SIZE);
-
 	if (mxs_chan->chan_irq != NO_IRQ) {
 		ret = request_irq(mxs_chan->chan_irq, mxs_dma_int_handler,
 					0, "mxs-dma", mxs_dma);
@@ -591,7 +589,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
+		unsigned long flags)
 {
 	struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;

drivers/dma/of-dma.c

@@ -218,3 +218,38 @@ struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
 			&dma_spec->args[0]);
 }
 EXPORT_SYMBOL_GPL(of_dma_simple_xlate);
+
+/**
+ * of_dma_xlate_by_chan_id - Translate dt property to DMA channel by channel id
+ * @dma_spec:	pointer to DMA specifier as found in the device tree
+ * @of_dma:	pointer to DMA controller data
+ *
+ * This function can be used as the of xlate callback for DMA driver which wants
+ * to match the channel based on the channel id. When using this xlate function
+ * the #dma-cells propety of the DMA controller dt node needs to be set to 1.
+ * The data parameter of of_dma_controller_register must be a pointer to the
+ * dma_device struct the function should match upon.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	struct dma_device *dev = ofdma->of_dma_data;
+	struct dma_chan *chan, *candidate = NULL;
+
+	if (!dev || dma_spec->args_count != 1)
+		return NULL;
+
+	list_for_each_entry(chan, &dev->channels, device_node)
+		if (chan->chan_id == dma_spec->args[0]) {
+			candidate = chan;
+			break;
+		}
+
+	if (!candidate)
+		return NULL;
+
+	return dma_get_slave_channel(candidate);
+}
+EXPORT_SYMBOL_GPL(of_dma_xlate_by_chan_id);

drivers/dma/omap-dma.c

@@ -853,8 +853,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg(
 
 static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
-	size_t period_len, enum dma_transfer_direction dir, unsigned long flags,
+	size_t period_len, enum dma_transfer_direction dir, unsigned long flags)
-	void *context)
 {
 	struct omap_dmadev *od = to_omap_dma_dev(chan->device);
 	struct omap_chan *c = to_omap_dma_chan(chan);

drivers/dma/qcom_bam_dma.c

@@ -61,12 +61,17 @@ struct bam_desc_hw {
 #define DESC_FLAG_INT BIT(15)
 #define DESC_FLAG_EOT BIT(14)
 #define DESC_FLAG_EOB BIT(13)
+#define DESC_FLAG_NWD BIT(12)
 
 struct bam_async_desc {
 	struct virt_dma_desc vd;
 
 	u32 num_desc;
 	u32 xfer_len;
+
+	/* transaction flags, EOT|EOB|NWD */
+	u16 flags;
+
 	struct bam_desc_hw *curr_desc;
 
 	enum dma_transfer_direction dir;
@@ -490,6 +495,14 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 	if (!async_desc)
 		goto err_out;
 
+	if (flags & DMA_PREP_FENCE)
+		async_desc->flags |= DESC_FLAG_NWD;
+
+	if (flags & DMA_PREP_INTERRUPT)
+		async_desc->flags |= DESC_FLAG_EOT;
+	else
+		async_desc->flags |= DESC_FLAG_INT;
+
 	async_desc->num_desc = num_alloc;
 	async_desc->curr_desc = async_desc->desc;
 	async_desc->dir = direction;
@@ -793,7 +806,10 @@ static void bam_start_dma(struct bam_chan *bchan)
 	else
 		async_desc->xfer_len = async_desc->num_desc;
 
-	/* set INT on last descriptor */
+	/* set any special flags on the last descriptor */
+	if (async_desc->num_desc == async_desc->xfer_len)
+		desc[async_desc->xfer_len - 1].flags = async_desc->flags;
+	else
 		desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT;
 
 	if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {

drivers/dma/s3c24xx-dma.c

@@ -889,8 +889,7 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
 
 static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
-	enum dma_transfer_direction direction, unsigned long flags,
+	enum dma_transfer_direction direction, unsigned long flags)
-	void *context)
 {
 	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
 	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;

drivers/dma/sa11x0-dma.c

@@ -612,7 +612,7 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
 
 static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
-	enum dma_transfer_direction dir, unsigned long flags, void *context)
+	enum dma_transfer_direction dir, unsigned long flags)
 {
 	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
 	struct sa11x0_dma_desc *txd;

drivers/dma/sh/Kconfig

@@ -2,21 +2,39 @@
 # DMA engine configuration for sh
 #
 
+#
+# DMA Engine Helpers
+#
+
 config SH_DMAE_BASE
 	bool "Renesas SuperH DMA Engine support"
-	depends on (SUPERH && SH_DMA) || ARCH_SHMOBILE || COMPILE_TEST
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+	depends on !SUPERH || SH_DMA
 	depends on !SH_DMA_API
 	default y
 	select DMA_ENGINE
 	help
 	  Enable support for the Renesas SuperH DMA controllers.
 
+#
+# DMA Controllers
+#
+
 config SH_DMAE
 	tristate "Renesas SuperH DMAC support"
 	depends on SH_DMAE_BASE
 	help
 	  Enable support for the Renesas SuperH DMA controllers.
 
+if SH_DMAE
+
+config SH_DMAE_R8A73A4
+	def_bool y
+	depends on ARCH_R8A73A4
+	depends on OF
+
+endif
+
 config SUDMAC
 	tristate "Renesas SUDMAC support"
 	depends on SH_DMAE_BASE
@@ -34,7 +52,3 @@ config RCAR_AUDMAC_PP
 	depends on SH_DMAE_BASE
 	help
 	  Enable support for the Renesas R-Car Audio DMAC Peripheral Peripheral controllers.
-
-config SHDMA_R8A73A4
-	def_bool y
-	depends on ARCH_R8A73A4 && SH_DMAE != n

drivers/dma/sh/Makefile

@@ -1,10 +1,18 @@
+#
+# DMA Engine Helpers
+#
+
 obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o shdma-of.o
-obj-$(CONFIG_SH_DMAE) += shdma.o
+
+#
+# DMA Controllers
+#
+
 shdma-y := shdmac.o
-ifeq ($(CONFIG_OF),y)
+shdma-$(CONFIG_SH_DMAE_R8A73A4) += shdma-r8a73a4.o
-shdma-$(CONFIG_SHDMA_R8A73A4) += shdma-r8a73a4.o
-endif
 shdma-objs := $(shdma-y)
+obj-$(CONFIG_SH_DMAE) += shdma.o
+
 obj-$(CONFIG_SUDMAC) += sudmac.o
 obj-$(CONFIG_RCAR_HPB_DMAE) += rcar-hpbdma.o
 obj-$(CONFIG_RCAR_AUDMAC_PP) += rcar-audmapp.o

drivers/dma/sh/rcar-audmapp.c

@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
+#include <linux/of_dma.h>
 #include <linux/platform_data/dma-rcar-audmapp.h>
 #include <linux/platform_device.h>
 #include <linux/shdma-base.h>
@@ -45,8 +46,9 @@
 
 struct audmapp_chan {
 	struct shdma_chan shdma_chan;
-	struct audmapp_slave_config *config;
 	void __iomem *base;
+	dma_addr_t slave_addr;
+	u32 chcr;
 };
 
 struct audmapp_device {
@@ -56,7 +58,16 @@ struct audmapp_device {
 	void __iomem *chan_reg;
 };
 
+struct audmapp_desc {
+	struct shdma_desc shdma_desc;
+	dma_addr_t src;
+	dma_addr_t dst;
+};
+
+#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan)
+
 #define to_chan(chan) container_of(chan, struct audmapp_chan, shdma_chan)
+#define to_desc(sdesc) container_of(sdesc, struct audmapp_desc, shdma_desc)
 #define to_dev(chan) container_of(chan->shdma_chan.dma_chan.device,	\
 				  struct audmapp_device, shdma_dev.dma_dev)
 
@@ -90,70 +101,82 @@ static void audmapp_halt(struct shdma_chan *schan)
 }
 
 static void audmapp_start_xfer(struct shdma_chan *schan,
-			       struct shdma_desc *sdecs)
+			       struct shdma_desc *sdesc)
 {
 	struct audmapp_chan *auchan = to_chan(schan);
 	struct audmapp_device *audev = to_dev(auchan);
-	struct audmapp_slave_config *cfg = auchan->config;
+	struct audmapp_desc *desc = to_desc(sdesc);
 	struct device *dev = audev->dev;
-	u32 chcr = cfg->chcr | PDMACHCR_DE;
+	u32 chcr = auchan->chcr | PDMACHCR_DE;
 
-	dev_dbg(dev, "src/dst/chcr = %pad/%pad/%x\n",
+	dev_dbg(dev, "src/dst/chcr = %pad/%pad/%08x\n",
-		&cfg->src, &cfg->dst, cfg->chcr);
+		&desc->src, &desc->dst, chcr);
 
-	audmapp_write(auchan, cfg->src,	PDMASAR);
+	audmapp_write(auchan, desc->src,	PDMASAR);
-	audmapp_write(auchan, cfg->dst,	PDMADAR);
+	audmapp_write(auchan, desc->dst,	PDMADAR);
 	audmapp_write(auchan, chcr,	PDMACHCR);
 }
 
-static struct audmapp_slave_config *
+static void audmapp_get_config(struct audmapp_chan *auchan, int slave_id,
-audmapp_find_slave(struct audmapp_chan *auchan, int slave_id)
+			      u32 *chcr, dma_addr_t *dst)
 {
 	struct audmapp_device *audev = to_dev(auchan);
 	struct audmapp_pdata *pdata = audev->pdata;
 	struct audmapp_slave_config *cfg;
 	int i;
 
+	*chcr	= 0;
+	*dst	= 0;
+
+	if (!pdata) { /* DT */
+		*chcr = ((u32)slave_id) << 16;
+		auchan->shdma_chan.slave_id = (slave_id) >> 8;
+		return;
+	}
+
+	/* non-DT */
+
 	if (slave_id >= AUDMAPP_SLAVE_NUMBER)
-		return NULL;
+		return;
 
 	for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
-		if (cfg->slave_id == slave_id)
+		if (cfg->slave_id == slave_id) {
-			return cfg;
+			*chcr	= cfg->chcr;
-
+			*dst	= cfg->dst;
-	return NULL;
+			break;
+		}
 }
 
 static int audmapp_set_slave(struct shdma_chan *schan, int slave_id,
 			     dma_addr_t slave_addr, bool try)
 {
 	struct audmapp_chan *auchan = to_chan(schan);
-	struct audmapp_slave_config *cfg =
+	u32 chcr;
-		audmapp_find_slave(auchan, slave_id);
+	dma_addr_t dst;
+
+	audmapp_get_config(auchan, slave_id, &chcr, &dst);
 
-	if (!cfg)
-		return -ENODEV;
 	if (try)
 		return 0;
 
-	auchan->config	= cfg;
+	auchan->chcr		= chcr;
+	auchan->slave_addr	= slave_addr ? : dst;
 
 	return 0;
 }
 
 static int audmapp_desc_setup(struct shdma_chan *schan,
-			      struct shdma_desc *sdecs,
+			      struct shdma_desc *sdesc,
 			      dma_addr_t src, dma_addr_t dst, size_t *len)
 {
-	struct audmapp_chan *auchan = to_chan(schan);
+	struct audmapp_desc *desc = to_desc(sdesc);
-	struct audmapp_slave_config *cfg = auchan->config;
-
-	if (!cfg)
-		return -ENODEV;
 
 	if (*len > (size_t)AUDMAPP_LEN_MAX)
 		*len = (size_t)AUDMAPP_LEN_MAX;
 
+	desc->src = src;
+	desc->dst = dst;
+
 	return 0;
 }
 
@@ -164,7 +187,9 @@ static void audmapp_setup_xfer(struct shdma_chan *schan,
 
 static dma_addr_t audmapp_slave_addr(struct shdma_chan *schan)
 {
-	return 0; /* always fixed address */
+	struct audmapp_chan *auchan = to_chan(schan);
+
+	return auchan->slave_addr;
 }
 
 static bool audmapp_channel_busy(struct shdma_chan *schan)
@@ -183,7 +208,7 @@ static bool audmapp_desc_completed(struct shdma_chan *schan,
 
 static struct shdma_desc *audmapp_embedded_desc(void *buf, int i)
 {
-	return &((struct shdma_desc *)buf)[i];
+	return &((struct audmapp_desc *)buf)[i].shdma_desc;
 }
 
 static const struct shdma_ops audmapp_shdma_ops = {
@@ -234,16 +259,39 @@ static void audmapp_chan_remove(struct audmapp_device *audev)
 	dma_dev->chancnt = 0;
 }
 
+static struct dma_chan *audmapp_of_xlate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	dma_cap_mask_t mask;
+	struct dma_chan *chan;
+	u32 chcr = dma_spec->args[0];
+
+	if (dma_spec->args_count != 1)
+		return NULL;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	chan = dma_request_channel(mask, shdma_chan_filter, NULL);
+	if (chan)
+		to_shdma_chan(chan)->hw_req = chcr;
+
+	return chan;
+}
+
 static int audmapp_probe(struct platform_device *pdev)
 {
 	struct audmapp_pdata *pdata = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
 	struct audmapp_device *audev;
 	struct shdma_dev *sdev;
 	struct dma_device *dma_dev;
 	struct resource *res;
 	int err, i;
 
-	if (!pdata)
+	if (np)
+		of_dma_controller_register(np, audmapp_of_xlate, pdev);
+	else if (!pdata)
 		return -ENODEV;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -260,7 +308,7 @@ static int audmapp_probe(struct platform_device *pdev)
 
 	sdev		= &audev->shdma_dev;
 	sdev->ops	= &audmapp_shdma_ops;
-	sdev->desc_size	= sizeof(struct shdma_desc);
+	sdev->desc_size	= sizeof(struct audmapp_desc);
 
 	dma_dev			= &sdev->dma_dev;
 	dma_dev->copy_align	= LOG2_DEFAULT_XFER_SIZE;
@@ -305,12 +353,18 @@ static int audmapp_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id audmapp_of_match[] = {
+	{ .compatible = "renesas,rcar-audmapp", },
+	{},
+};
+
 static struct platform_driver audmapp_driver = {
 	.probe		= audmapp_probe,
 	.remove		= audmapp_remove,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "rcar-audmapp-engine",
+		.of_match_table = audmapp_of_match,
 	},
 };
 module_platform_driver(audmapp_driver);

drivers/dma/sh/shdma-arm.h

@@ -45,7 +45,7 @@ enum {
 	((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
 	 (((i) & TS_HI_BIT)  << TS_HI_SHIFT))
 
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
 
 #endif

drivers/dma/sh/shdma-base.c

@@ -206,45 +206,6 @@ static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
 	return 0;
 }
 
-/*
- * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer. If for some reason you allocate a
- * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
- * parameter. If this filter is used, the slave driver, after calling
- * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .slave_id, .direction, and either .src_addr or .dst_addr set.
- * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
- * capability! If this becomes a requirement, hardware glue drivers, using this
- * services would have to provide their own filters, which first would check
- * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
- * this, and only then, in case of a match, call this common filter.
- * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
- * In that case the MID-RID value is used for slave channel filtering and is
- * passed to this function in the "arg" parameter.
- */
-bool shdma_chan_filter(struct dma_chan *chan, void *arg)
-{
-	struct shdma_chan *schan = to_shdma_chan(chan);
-	struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
-	const struct shdma_ops *ops = sdev->ops;
-	int match = (long)arg;
-	int ret;
-
-	if (match < 0)
-		/* No slave requested - arbitrary channel */
-		return true;
-
-	if (!schan->dev->of_node && match >= slave_num)
-		return false;
-
-	ret = ops->set_slave(schan, match, 0, true);
-	if (ret < 0)
-		return false;
-
-	return true;
-}
-EXPORT_SYMBOL(shdma_chan_filter);
-
 static int shdma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct shdma_chan *schan = to_shdma_chan(chan);
@@ -295,6 +256,51 @@ static int shdma_alloc_chan_resources(struct dma_chan *chan)
 	return ret;
 }
 
+/*
+ * This is the standard shdma filter function to be used as a replacement to the
+ * "old" method, using the .private pointer. If for some reason you allocate a
+ * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
+ * parameter. If this filter is used, the slave driver, after calling
+ * dma_request_channel(), will also have to call dmaengine_slave_config() with
+ * .slave_id, .direction, and either .src_addr or .dst_addr set.
+ * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
+ * capability! If this becomes a requirement, hardware glue drivers, using this
+ * services would have to provide their own filters, which first would check
+ * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
+ * this, and only then, in case of a match, call this common filter.
+ * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
+ * In that case the MID-RID value is used for slave channel filtering and is
+ * passed to this function in the "arg" parameter.
+ */
+bool shdma_chan_filter(struct dma_chan *chan, void *arg)
+{
+	struct shdma_chan *schan;
+	struct shdma_dev *sdev;
+	int match = (long)arg;
+	int ret;
+
+	/* Only support channels handled by this driver. */
+	if (chan->device->device_alloc_chan_resources !=
+	    shdma_alloc_chan_resources)
+		return false;
+
+	if (match < 0)
+		/* No slave requested - arbitrary channel */
+		return true;
+
+	schan = to_shdma_chan(chan);
+	if (!schan->dev->of_node && match >= slave_num)
+		return false;
+
+	sdev = to_shdma_dev(schan->dma_chan.device);
+	ret = sdev->ops->set_slave(schan, match, 0, true);
+	if (ret < 0)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL(shdma_chan_filter);
+
 static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
 {
 	struct shdma_desc *desc, *_desc;
@@ -662,15 +668,16 @@ static struct dma_async_tx_descriptor *shdma_prep_slave_sg(
 static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags, void *context)
+	unsigned long flags)
 {
 	struct shdma_chan *schan = to_shdma_chan(chan);
 	struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
+	struct dma_async_tx_descriptor *desc;
 	const struct shdma_ops *ops = sdev->ops;
 	unsigned int sg_len = buf_len / period_len;
 	int slave_id = schan->slave_id;
 	dma_addr_t slave_addr;
-	struct scatterlist sgl[SHDMA_MAX_SG_LEN];
+	struct scatterlist *sgl;
 	int i;
 
 	if (!chan)
@@ -694,7 +701,16 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
 
 	slave_addr = ops->slave_addr(schan);
 
+	/*
+	 * Allocate the sg list dynamically as it would consumer too much stack
+	 * space.
+	 */
+	sgl = kcalloc(sg_len, sizeof(*sgl), GFP_KERNEL);
+	if (!sgl)
+		return NULL;
+
 	sg_init_table(sgl, sg_len);
+
 	for (i = 0; i < sg_len; i++) {
 		dma_addr_t src = buf_addr + (period_len * i);
 
@@ -704,8 +720,11 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
 		sg_dma_len(&sgl[i]) = period_len;
 	}
 
-	return shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
+	desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
 			     direction, flags, true);
+
+	kfree(sgl);
+	return desc;
 }
 
 static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,

drivers/dma/sh/shdma.h

@@ -62,7 +62,7 @@ struct sh_dmae_desc {
 #define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
 				     struct sh_dmae_device, shdma_dev.dma_dev)
 
-#ifdef CONFIG_SHDMA_R8A73A4
+#ifdef CONFIG_SH_DMAE_R8A73A4
 extern const struct sh_dmae_pdata r8a73a4_dma_pdata;
 #define r8a73a4_shdma_devid (&r8a73a4_dma_pdata)
 #else

drivers/dma/sh/shdmac.c

@@ -38,12 +38,12 @@
 #include "../dmaengine.h"
 #include "shdma.h"
 
-/* DMA register */
+/* DMA registers */
-#define SAR	0x00
+#define SAR	0x00	/* Source Address Register */
-#define DAR	0x04
+#define DAR	0x04	/* Destination Address Register */
-#define TCR	0x08
+#define TCR	0x08	/* Transfer Count Register */
-#define CHCR	0x0C
+#define CHCR	0x0C	/* Channel Control Register */
-#define DMAOR	0x40
+#define DMAOR	0x40	/* DMA Operation Register */
 
 #define TEND	0x18 /* USB-DMAC */
 
@@ -239,9 +239,8 @@ static void dmae_init(struct sh_dmae_chan *sh_chan)
 {
 	/*
 	 * Default configuration for dual address memory-memory transfer.
-	 * 0x400 represents auto-request.
 	 */
-	u32 chcr = DM_INC | SM_INC | 0x400 | log2size_to_chcr(sh_chan,
+	u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan,
 						   LOG2_DEFAULT_XFER_SIZE);
 	sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
 	chcr_write(sh_chan, chcr);

drivers/dma/sirf-dma.c

@@ -580,7 +580,7 @@ static struct dma_async_tx_descriptor *sirfsoc_dma_prep_interleaved(
 static struct dma_async_tx_descriptor *
 sirfsoc_dma_prep_cyclic(struct dma_chan *chan, dma_addr_t addr,
 	size_t buf_len, size_t period_len,
-	enum dma_transfer_direction direction, unsigned long flags, void *context)
+	enum dma_transfer_direction direction, unsigned long flags)
 {
 	struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan);
 	struct sirfsoc_dma_desc *sdesc = NULL;

drivers/dma/ste_dma40.c

@@ -2531,8 +2531,7 @@ d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 static struct dma_async_tx_descriptor *
 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
 		     size_t buf_len, size_t period_len,
-		     enum dma_transfer_direction direction, unsigned long flags,
+		     enum dma_transfer_direction direction, unsigned long flags)
-		     void *context)
 {
 	unsigned int periods = buf_len / period_len;
 	struct dma_async_tx_descriptor *txd;

drivers/dma/tegra20-apb-dma.c

@@ -1055,7 +1055,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 	struct dma_chan *dc, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags, void *context)
+	unsigned long flags)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
 	struct tegra_dma_desc *dma_desc = NULL;

include/dt-bindings/dma/nbpfaxi.h

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DT_BINDINGS_NBPFAXI_H
+#define DT_BINDINGS_NBPFAXI_H
+
+/**
+ * Use "#dma-cells = <2>;" with the second integer defining slave DMA flags:
+ */
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+#endif

include/linux/dmaengine.h

@@ -37,7 +37,6 @@
  */
 typedef s32 dma_cookie_t;
 #define DMA_MIN_COOKIE	1
-#define DMA_MAX_COOKIE	INT_MAX
 
 static inline int dma_submit_error(dma_cookie_t cookie)
 {
@@ -671,7 +670,7 @@ struct dma_device {
 	struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context);
+		unsigned long flags);
 	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
 		struct dma_chan *chan, struct dma_interleaved_template *xt,
 		unsigned long flags);
@@ -746,7 +745,7 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
 		unsigned long flags)
 {
 	return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
-						period_len, dir, flags, NULL);
+						period_len, dir, flags);
 }
 
 static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(

include/linux/of_dma.h

@@ -41,6 +41,8 @@ extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 						     const char *name);
 extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
 		struct of_dma *ofdma);
+extern struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
+		struct of_dma *ofdma);
 #else
 static inline int of_dma_controller_register(struct device_node *np,
 		struct dma_chan *(*of_dma_xlate)
@@ -66,6 +68,8 @@ static inline struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_s
 	return NULL;
 }
 
+#define of_dma_xlate_by_chan_id NULL
+
 #endif
 
 #endif /* __LINUX_OF_DMA_H */

include/linux/platform_data/dma-imx.h

@@ -40,6 +40,7 @@ enum sdma_peripheral_type {
 	IMX_DMATYPE_ASRC,	/* ASRC */
 	IMX_DMATYPE_ESAI,	/* ESAI */
 	IMX_DMATYPE_SSI_DUAL,	/* SSI Dual FIFO */
+	IMX_DMATYPE_ASRC_SP,	/* Shared ASRC */
 };
 
 enum imx_dma_prio {

include/linux/platform_data/edma.h

@@ -150,6 +150,8 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
+
 struct edma_rsv_info {
 
 	const s16	(*rsv_chans)[2];

include/linux/sh_dma.h

@@ -95,19 +95,21 @@ struct sh_dmae_pdata {
 };
 
 /* DMAOR definitions */
-#define DMAOR_AE	0x00000004
+#define DMAOR_AE	0x00000004	/* Address Error Flag */
 #define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
+#define DMAOR_DME	0x00000001	/* DMA Master Enable */
 
 /* Definitions for the SuperH DMAC */
-#define DM_INC	0x00004000
+#define DM_INC	0x00004000	/* Destination addresses are incremented */
-#define DM_DEC	0x00008000
+#define DM_DEC	0x00008000	/* Destination addresses are decremented */
-#define DM_FIX	0x0000c000
+#define DM_FIX	0x0000c000	/* Destination address is fixed */
-#define SM_INC	0x00001000
+#define SM_INC	0x00001000	/* Source addresses are incremented */
-#define SM_DEC	0x00002000
+#define SM_DEC	0x00002000	/* Source addresses are decremented */
-#define SM_FIX	0x00003000
+#define SM_FIX	0x00003000	/* Source address is fixed */
-#define CHCR_DE	0x00000001
+#define RS_AUTO	0x00000400	/* Auto Request */
-#define CHCR_TE	0x00000002
+#define RS_ERS	0x00000800	/* DMA extended resource selector */
-#define CHCR_IE	0x00000004
+#define CHCR_DE	0x00000001	/* DMA Enable */
+#define CHCR_TE	0x00000002	/* Transfer End Flag */
+#define CHCR_IE	0x00000004	/* Interrupt Enable */
 
 #endif