nagai/kernel
3
0
Fork 0
forked from mirrors/linux
Code Pull requests Activity

net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.

Browse source 
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
  to have a bandwidth of at least this value.
  max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
  of up to this value.

o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
  which takes 4 arguments:
  netdev, VF number, min_tx_rate, max_tx_rate

o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.

o Drivers that currently implement ndo_set_vf_tx_rate should now call
  ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
  greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
  implemented by driver.

o If user enters only one of either min_tx_rate or max_tx_rate, then,
  userland should read back the other value from driver and set both
  for IFLA_VF_RATE.
  Drivers that have not yet implemented IFLA_VF_RATE should always
  return min_tx_rate as 0 when read from ip tool.

o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
  IFLA_VF_RATE should override.

o Idea is to have consistent display of rate values to user.

o Usage example: -

  ./ip link set p4p1 vf 0 rate 900

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sucheta Chakraborty 2014-05-22 09:59:05 -04:00 committed by David S. Miller
parent 307f099520
commit ed616689a3
20 changed files with 158 additions and 69 deletions
repo.diff.show_diff_stats Download patch file Download diff file Expand all files Collapse all files

3
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
View file

@ -2576,7 +2576,8 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx,
ivi->vf = vfidx;
ivi->qos = 0;
ivi->tx_rate = 10000; /* always 10G. TBA take from link struct */
ivi->max_tx_rate = 10000; /* always 10G. TBA take from link struct */
ivi->min_tx_rate = 0;
ivi->spoofchk = 1; /*always enabled */
if (vf->state == VF_ENABLED) {
/* mac and vlan are in vlan_mac objects */

21
drivers/net/ethernet/emulex/benet/be_main.c
View file

@ -1302,7 +1302,8 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
return -EINVAL;
vi->vf = vf;
vi->tx_rate = vf_cfg->tx_rate;
vi->max_tx_rate = vf_cfg->tx_rate;
vi->min_tx_rate = 0;
vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK;
vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT;
memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
@ -1342,7 +1343,8 @@ static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
return status;
}
static int be_set_vf_tx_rate(struct net_device *netdev, int vf, int rate)
static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct be_adapter *adapter = netdev_priv(netdev);
int status = 0;
@ -1353,18 +1355,21 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf, int rate)
if (vf >= adapter->num_vfs)
return -EINVAL;
if (rate < 100 || rate > 10000) {
if (min_tx_rate)
return -EINVAL;
if (max_tx_rate < 100 || max_tx_rate > 10000) {
dev_err(&adapter->pdev->dev,
"tx rate must be between 100 and 10000 Mbps\n");
"max tx rate must be between 100 and 10000 Mbps\n");
return -EINVAL;
}
status = be_cmd_config_qos(adapter, rate / 10, vf + 1);
status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1);
if (status)
dev_err(&adapter->pdev->dev,
"tx rate %d on VF %d failed\n", rate, vf);
"max tx rate %d on VF %d failed\n", max_tx_rate, vf);
else
adapter->vf_cfg[vf].tx_rate = rate;
adapter->vf_cfg[vf].tx_rate = max_tx_rate;
return status;
}
static int be_set_vf_link_state(struct net_device *netdev, int vf,
@ -4257,7 +4262,7 @@ static const struct net_device_ops be_netdev_ops = {
.ndo_vlan_rx_kill_vid = be_vlan_rem_vid,
.ndo_set_vf_mac = be_set_vf_mac,
.ndo_set_vf_vlan = be_set_vf_vlan,
.ndo_set_vf_tx_rate = be_set_vf_tx_rate,
.ndo_set_vf_rate = be_set_vf_tx_rate,
.ndo_get_vf_config = be_get_vf_config,
.ndo_set_vf_link_state = be_set_vf_link_state,
#ifdef CONFIG_NET_POLL_CONTROLLER

2
drivers/net/ethernet/intel/i40e/i40e_main.c
View file

@ -6724,7 +6724,7 @@ static const struct net_device_ops i40e_netdev_ops = {
.ndo_set_features = i40e_set_features,
.ndo_set_vf_mac = i40e_ndo_set_vf_mac,
.ndo_set_vf_vlan = i40e_ndo_set_vf_port_vlan,
.ndo_set_vf_tx_rate = i40e_ndo_set_vf_bw,
.ndo_set_vf_rate = i40e_ndo_set_vf_bw,
.ndo_get_vf_config = i40e_ndo_get_vf_config,
.ndo_set_vf_link_state = i40e_ndo_set_vf_link_state,
#ifdef CONFIG_I40E_VXLAN

26
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
View file

@ -2205,7 +2205,8 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
*
* configure vf tx rate
**/
int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
int max_tx_rate)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_pf *pf = np->vsi->back;
@ -2221,6 +2222,12 @@ int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
goto error;
}
if (min_tx_rate) {
dev_err(&pf->pdev->dev, "Invalid min tx rate (%d) (greater than 0) specified for vf %d.\n",
min_tx_rate, vf_id);
return -EINVAL;
}
vf = &(pf->vf[vf_id]);
vsi = pf->vsi[vf->lan_vsi_index];
if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states)) {
@ -2243,23 +2250,23 @@ int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
break;
}
if (tx_rate > speed) {
dev_err(&pf->pdev->dev, "Invalid tx rate %d specified for vf %d.",
tx_rate, vf->vf_id);
if (max_tx_rate > speed) {
dev_err(&pf->pdev->dev, "Invalid max tx rate %d specified for vf %d.",
max_tx_rate, vf->vf_id);
ret = -EINVAL;
goto error;
}
/* Tx rate credits are in values of 50Mbps, 0 is disabled*/
ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, tx_rate / 50, 0,
NULL);
ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, max_tx_rate / 50,
0, NULL);
if (ret) {
dev_err(&pf->pdev->dev, "Unable to set tx rate, error code %d.\n",
dev_err(&pf->pdev->dev, "Unable to set max tx rate, error code %d.\n",
ret);
ret = -EIO;
goto error;
}
vf->tx_rate = tx_rate;
vf->tx_rate = max_tx_rate;
error:
return ret;
}
@ -2301,7 +2308,8 @@ int i40e_ndo_get_vf_config(struct net_device *netdev,
memcpy(&ivi->mac, vf->default_lan_addr.addr, ETH_ALEN);
ivi->tx_rate = vf->tx_rate;
ivi->max_tx_rate = vf->tx_rate;
ivi->min_tx_rate = 0;
ivi->vlan = le16_to_cpu(vsi->info.pvid) & I40E_VLAN_MASK;
ivi->qos = (le16_to_cpu(vsi->info.pvid) & I40E_PRIORITY_MASK) >>
I40E_VLAN_PRIORITY_SHIFT;

3
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
View file

@ -116,7 +116,8 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf);
int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac);
int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
int vf_id, u16 vlan_id, u8 qos);
int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate);
int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
int max_tx_rate);
int i40e_ndo_get_vf_config(struct net_device *netdev,
int vf_id, struct ifla_vf_info *ivi);
int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link);

20
drivers/net/ethernet/intel/igb/igb_main.c
View file

@ -169,7 +169,7 @@ static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
static int igb_ndo_set_vf_vlan(struct net_device *netdev,
int vf, u16 vlan, u8 qos);
static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
bool setting);
static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
@ -2084,7 +2084,7 @@ static const struct net_device_ops igb_netdev_ops = {
.ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
.ndo_set_vf_mac = igb_ndo_set_vf_mac,
.ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
.ndo_set_vf_tx_rate = igb_ndo_set_vf_bw,
.ndo_set_vf_rate = igb_ndo_set_vf_bw,
.ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk,
.ndo_get_vf_config = igb_ndo_get_vf_config,
#ifdef CONFIG_NET_POLL_CONTROLLER
@ -7879,7 +7879,8 @@ static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
}
}
static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@ -7888,15 +7889,19 @@ static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
if (hw->mac.type != e1000_82576)
return -EOPNOTSUPP;
if (min_tx_rate)
return -EINVAL;
actual_link_speed = igb_link_mbps(adapter->link_speed);
if ((vf >= adapter->vfs_allocated_count) ||
(!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
(tx_rate < 0) || (tx_rate > actual_link_speed))
(max_tx_rate < 0) ||
(max_tx_rate > actual_link_speed))
return -EINVAL;
adapter->vf_rate_link_speed = actual_link_speed;
adapter->vf_data[vf].tx_rate = (u16)tx_rate;
igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
return 0;
}
@ -7936,7 +7941,8 @@ static int igb_ndo_get_vf_config(struct net_device *netdev,
return -EINVAL;
ivi->vf = vf;
memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
ivi->tx_rate = adapter->vf_data[vf].tx_rate;
ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
ivi->min_tx_rate = 0;
ivi->vlan = adapter->vf_data[vf].pf_vlan;
ivi->qos = adapter->vf_data[vf].pf_qos;
ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;

2
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
View file

@ -7926,7 +7926,7 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_do_ioctl = ixgbe_ioctl,
.ndo_set_vf_mac = ixgbe_ndo_set_vf_mac,
.ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan,
.ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw,
.ndo_set_vf_rate = ixgbe_ndo_set_vf_bw,
.ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk,
.ndo_get_vf_config = ixgbe_ndo_get_vf_config,
.ndo_get_stats64 = ixgbe_get_stats64,

13
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
View file

@ -1222,7 +1222,8 @@ void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
}
}
int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
int max_tx_rate)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int link_speed;
@ -1240,13 +1241,16 @@ int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
if (link_speed != 10000)
return -EINVAL;
if (min_tx_rate)
return -EINVAL;
/* rate limit cannot be less than 10Mbs or greater than link speed */
if (tx_rate && ((tx_rate <= 10) || (tx_rate > link_speed)))
if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
return -EINVAL;
/* store values */
adapter->vf_rate_link_speed = link_speed;
adapter->vfinfo[vf].tx_rate = tx_rate;
adapter->vfinfo[vf].tx_rate = max_tx_rate;
/* update hardware configuration */
ixgbe_set_vf_rate_limit(adapter, vf);
@ -1288,7 +1292,8 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev,
return -EINVAL;
ivi->vf = vf;
memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
ivi->min_tx_rate = 0;
ivi->vlan = adapter->vfinfo[vf].pf_vlan;
ivi->qos = adapter->vfinfo[vf].pf_qos;
ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;

3
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
View file

@ -44,7 +44,8 @@ void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
u8 qos);
int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
int max_tx_rate);
int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
int ixgbe_ndo_get_vf_config(struct net_device *netdev,
int vf, struct ifla_vf_info *ivi);

11
drivers/net/ethernet/mellanox/mlx4/cmd.c
View file

@ -2486,11 +2486,12 @@ int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_in
ivf->mac[4] = ((s_info->mac >> (1*8)) & 0xff);
ivf->mac[5] = ((s_info->mac) & 0xff);
ivf->vlan = s_info->default_vlan;
ivf->qos = s_info->default_qos;
ivf->tx_rate = s_info->tx_rate;
ivf->spoofchk = s_info->spoofchk;
ivf->linkstate = s_info->link_state;
ivf->vlan = s_info->default_vlan;
ivf->qos = s_info->default_qos;
ivf->max_tx_rate = s_info->tx_rate;
ivf->min_tx_rate = 0;
ivf->spoofchk = s_info->spoofchk;
ivf->linkstate = s_info->link_state;
return 0;
}

1
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
View file

@ -1319,6 +1319,7 @@ struct qlcnic_eswitch {
#define QL_STATUS_INVALID_PARAM -1
#define MAX_BW 100 /* % of link speed */
#define MIN_BW 1 /* % of link speed */
#define MAX_VLAN_ID 4095
#define MIN_VLAN_ID 2
#define DEFAULT_MAC_LEARN 1

2
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
View file

@ -525,7 +525,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
#endif
#ifdef CONFIG_QLCNIC_SRIOV
.ndo_set_vf_mac = qlcnic_sriov_set_vf_mac,
.ndo_set_vf_tx_rate = qlcnic_sriov_set_vf_tx_rate,
.ndo_set_vf_rate = qlcnic_sriov_set_vf_tx_rate,
.ndo_get_vf_config = qlcnic_sriov_get_vf_config,
.ndo_set_vf_vlan = qlcnic_sriov_set_vf_vlan,
.ndo_set_vf_spoofchk = qlcnic_sriov_set_vf_spoofchk,

2
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
View file

@ -233,7 +233,7 @@ bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *,
void qlcnic_sriov_pf_reset(struct qlcnic_adapter *);
int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *);
int qlcnic_sriov_set_vf_mac(struct net_device *, int, u8 *);
int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int);
int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int, int);
int qlcnic_sriov_get_vf_config(struct net_device *, int ,
struct ifla_vf_info *);
int qlcnic_sriov_set_vf_vlan(struct net_device *, int, u16, u8);

1
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
View file

@ -201,6 +201,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
sriov->vf_info[i].vp = vp;
vp->vlan_mode = QLC_GUEST_VLAN_MODE;
vp->max_tx_bw = MAX_BW;
vp->min_tx_bw = MIN_BW;
vp->spoofchk = false;
random_ether_addr(vp->mac);
dev_info(&adapter->pdev->dev,

56
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
View file

@ -1848,7 +1848,8 @@ int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
return 0;
}
int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate)
int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
@ -1863,35 +1864,52 @@ int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate)
if (vf >= sriov->num_vfs)
return -EINVAL;
if (tx_rate >= 10000 || tx_rate < 100) {
netdev_err(netdev,
"Invalid Tx rate, allowed range is [%d - %d]",
QLC_VF_MIN_TX_RATE, QLC_VF_MAX_TX_RATE);
return -EINVAL;
}
if (tx_rate == 0)
tx_rate = 10000;
vf_info = &sriov->vf_info[vf];
vp = vf_info->vp;
vpid = vp->handle;
if (!min_tx_rate)
min_tx_rate = QLC_VF_MIN_TX_RATE;
if (max_tx_rate &&
(max_tx_rate >= 10000 || max_tx_rate < min_tx_rate)) {
netdev_err(netdev,
"Invalid max Tx rate, allowed range is [%d - %d]",
min_tx_rate, QLC_VF_MAX_TX_RATE);
return -EINVAL;
}
if (!max_tx_rate)
max_tx_rate = 10000;
if (min_tx_rate &&
(min_tx_rate > max_tx_rate || min_tx_rate < QLC_VF_MIN_TX_RATE)) {
netdev_err(netdev,
"Invalid min Tx rate, allowed range is [%d - %d]",
QLC_VF_MIN_TX_RATE, max_tx_rate);
return -EINVAL;
}
if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) {
if (qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, vpid))
return -EIO;
nic_info.max_tx_bw = tx_rate / 100;
nic_info.max_tx_bw = max_tx_rate / 100;
nic_info.min_tx_bw = min_tx_rate / 100;
nic_info.bit_offsets = BIT_0;
if (qlcnic_sriov_pf_set_vport_info(adapter, &nic_info, vpid))
return -EIO;
}
vp->max_tx_bw = tx_rate / 100;
vp->max_tx_bw = max_tx_rate / 100;
netdev_info(netdev,
"Setting Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n",
tx_rate, vp->max_tx_bw, vf);
"Setting Max Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n",
max_tx_rate, vp->max_tx_bw, vf);
vp->min_tx_bw = min_tx_rate / 100;
netdev_info(netdev,
"Setting Min Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n",
min_tx_rate, vp->min_tx_bw, vf);
return 0;
}
@ -1990,9 +2008,13 @@ int qlcnic_sriov_get_vf_config(struct net_device *netdev,
ivi->qos = vp->qos;
ivi->spoofchk = vp->spoofchk;
if (vp->max_tx_bw == MAX_BW)
ivi->tx_rate = 0;
ivi->max_tx_rate = 0;
else
ivi->tx_rate = vp->max_tx_bw * 100;
ivi->max_tx_rate = vp->max_tx_bw * 100;
if (vp->min_tx_bw == MIN_BW)
ivi->min_tx_rate = 0;
else
ivi->min_tx_rate = vp->min_tx_bw * 100;
ivi->vf = vf;
return 0;

3
drivers/net/ethernet/sfc/siena_sriov.c
View file

@ -1633,7 +1633,8 @@ int efx_sriov_get_vf_config(struct net_device *net_dev, int vf_i,
ivi->vf = vf_i;
ether_addr_copy(ivi->mac, vf->addr.mac_addr);
ivi->tx_rate = 0;
ivi->max_tx_rate = 0;
ivi->min_tx_rate = 0;
tci = ntohs(vf->addr.tci);
ivi->vlan = tci & VLAN_VID_MASK;
ivi->qos = (tci >> VLAN_PRIO_SHIFT) & 0x7;

3
include/linux/if_link.h
View file

@ -10,8 +10,9 @@ struct ifla_vf_info {
__u8 mac[32];
__u32 vlan;
__u32 qos;
__u32 tx_rate;
__u32 spoofchk;
__u32 linkstate;
__u32 min_tx_rate;
__u32 max_tx_rate;
};
#endif /* _LINUX_IF_LINK_H */

8
include/linux/netdevice.h
View file

@ -850,7 +850,8 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev,
* SR-IOV management functions.
* int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
* int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
* int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
* int (*ndo_set_vf_rate)(struct net_device *dev, int vf, int min_tx_rate,
* int max_tx_rate);
* int (*ndo_set_vf_spoofchk)(struct net_device *dev, int vf, bool setting);
* int (*ndo_get_vf_config)(struct net_device *dev,
* int vf, struct ifla_vf_info *ivf);
@ -1044,8 +1045,9 @@ struct net_device_ops {
int queue, u8 *mac);
int (*ndo_set_vf_vlan)(struct net_device *dev,
int queue, u16 vlan, u8 qos);
int (*ndo_set_vf_tx_rate)(struct net_device *dev,
int vf, int rate);
int (*ndo_set_vf_rate)(struct net_device *dev,
int vf, int min_tx_rate,
int max_tx_rate);
int (*ndo_set_vf_spoofchk)(struct net_device *dev,
int vf, bool setting);
int (*ndo_get_vf_config)(struct net_device *dev,

9
include/uapi/linux/if_link.h
View file

@ -399,9 +399,10 @@ enum {
IFLA_VF_UNSPEC,
IFLA_VF_MAC, /* Hardware queue specific attributes */
IFLA_VF_VLAN,
IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */
IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */
IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */
IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */
__IFLA_VF_MAX,
};
@ -423,6 +424,12 @@ struct ifla_vf_tx_rate {
__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
};
struct ifla_vf_rate {
__u32 vf;
__u32 min_tx_rate; /* Min Bandwidth in Mbps */
__u32 max_tx_rate; /* Max Bandwidth in Mbps */
};
struct ifla_vf_spoofchk {
__u32 vf;
__u32 setting;

38
net/core/rtnetlink.c
View file

@ -767,8 +767,8 @@ static inline int rtnl_vfinfo_size(const struct net_device *dev,
size += num_vfs *
(nla_total_size(sizeof(struct ifla_vf_mac)) +
nla_total_size(sizeof(struct ifla_vf_vlan)) +
nla_total_size(sizeof(struct ifla_vf_tx_rate)) +
nla_total_size(sizeof(struct ifla_vf_spoofchk)));
nla_total_size(sizeof(struct ifla_vf_spoofchk)) +
nla_total_size(sizeof(struct ifla_vf_rate)));
return size;
} else
return 0;
@ -1034,6 +1034,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
struct ifla_vf_info ivi;
struct ifla_vf_mac vf_mac;
struct ifla_vf_vlan vf_vlan;
struct ifla_vf_rate vf_rate;
struct ifla_vf_tx_rate vf_tx_rate;
struct ifla_vf_spoofchk vf_spoofchk;
struct ifla_vf_link_state vf_linkstate;
@ -1054,6 +1055,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
break;
vf_mac.vf =
vf_vlan.vf =
vf_rate.vf =
vf_tx_rate.vf =
vf_spoofchk.vf =
vf_linkstate.vf = ivi.vf;
@ -1061,7 +1063,9 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
memcpy(vf_mac.mac, ivi.mac, sizeof(ivi.mac));
vf_vlan.vlan = ivi.vlan;
vf_vlan.qos = ivi.qos;
vf_tx_rate.rate = ivi.tx_rate;
vf_tx_rate.rate = ivi.max_tx_rate;
vf_rate.min_tx_rate = ivi.min_tx_rate;
vf_rate.max_tx_rate = ivi.max_tx_rate;
vf_spoofchk.setting = ivi.spoofchk;
vf_linkstate.link_state = ivi.linkstate;
vf = nla_nest_start(skb, IFLA_VF_INFO);
@ -1071,6 +1075,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
}
if (nla_put(skb, IFLA_VF_MAC, sizeof(vf_mac), &vf_mac) ||
nla_put(skb, IFLA_VF_VLAN, sizeof(vf_vlan), &vf_vlan) ||
nla_put(skb, IFLA_VF_RATE, sizeof(vf_rate),
&vf_rate) ||
nla_put(skb, IFLA_VF_TX_RATE, sizeof(vf_tx_rate),
&vf_tx_rate) ||
nla_put(skb, IFLA_VF_SPOOFCHK, sizeof(vf_spoofchk),
@ -1177,6 +1183,8 @@ static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
.len = sizeof(struct ifla_vf_tx_rate) },
[IFLA_VF_SPOOFCHK] = { .type = NLA_BINARY,
.len = sizeof(struct ifla_vf_spoofchk) },
[IFLA_VF_RATE] = { .type = NLA_BINARY,
.len = sizeof(struct ifla_vf_rate) },
};
static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
@ -1336,11 +1344,29 @@ static int do_setvfinfo(struct net_device *dev, struct nlattr *attr)
}
case IFLA_VF_TX_RATE: {
struct ifla_vf_tx_rate *ivt;
struct ifla_vf_info ivf;
ivt = nla_data(vf);
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_tx_rate)
err = ops->ndo_set_vf_tx_rate(dev, ivt->vf,
ivt->rate);
if (ops->ndo_get_vf_config)
err = ops->ndo_get_vf_config(dev, ivt->vf,
&ivf);
if (err)
break;
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_rate)
err = ops->ndo_set_vf_rate(dev, ivt->vf,
ivf.min_tx_rate,
ivt->rate);
break;
}
case IFLA_VF_RATE: {
struct ifla_vf_rate *ivt;
ivt = nla_data(vf);
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_rate)
err = ops->ndo_set_vf_rate(dev, ivt->vf,
ivt->min_tx_rate,
ivt->max_tx_rate);
break;
}
case IFLA_VF_SPOOFCHK: {