forked from mirrors/linux
net: phy: bcm7xxx: Add EPHY entry for 72165
72165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, create a new macro and set of functions for this different process type. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210917181551.2836036-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Florian Fainelli
Jakub Kicinski
parent
1a575cde59
commit
f68d08c437
2 changed files with 202 additions and 0 deletions
|
|
@ -398,6 +398,190 @@ static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev)
|
||||||
return bcm7xxx_28nm_ephy_apd_enable(phydev);
|
return bcm7xxx_28nm_ephy_apd_enable(phydev);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int bcm7xxx_16nm_ephy_afe_config(struct phy_device *phydev)
|
||||||
|
{
|
||||||
|
int tmp, rcalcode, rcalnewcodelp, rcalnewcode11, rcalnewcode11d2;
|
||||||
|
|
||||||
|
/* Reset PHY */
|
||||||
|
tmp = genphy_soft_reset(phydev);
|
||||||
|
if (tmp)
|
||||||
|
return tmp;
|
||||||
|
|
||||||
|
/* Reset AFE and PLL */
|
||||||
|
bcm_phy_write_exp_sel(phydev, 0x0003, 0x0006);
|
||||||
|
/* Clear reset */
|
||||||
|
bcm_phy_write_exp_sel(phydev, 0x0003, 0x0000);
|
||||||
|
|
||||||
|
/* Write PLL/AFE control register to select 54MHz crystal */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0000);
|
||||||
|
bcm_phy_write_misc(phydev, 0x0031, 0x0000, 0x044a);
|
||||||
|
|
||||||
|
/* Change Ka,Kp,Ki to pdiv=1 */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0033, 0x0002, 0x71a1);
|
||||||
|
/* Configuration override */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0033, 0x0001, 0x8000);
|
||||||
|
|
||||||
|
/* Change PLL_NDIV and PLL_NUDGE */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0031, 0x0001, 0x2f68);
|
||||||
|
bcm_phy_write_misc(phydev, 0x0031, 0x0002, 0x0000);
|
||||||
|
|
||||||
|
/* Reference frequency is 54Mhz, config_mode[15:14] = 3 (low
|
||||||
|
* phase)
|
||||||
|
*/
|
||||||
|
bcm_phy_write_misc(phydev, 0x0030, 0x0003, 0xc036);
|
||||||
|
|
||||||
|
/* Initialize bypass mode */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0032, 0x0003, 0x0000);
|
||||||
|
/* Bypass code, default: VCOCLK enabled */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0033, 0x0000, 0x0002);
|
||||||
|
/* LDOs at default setting */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0030, 0x0002, 0x01c0);
|
||||||
|
/* Release PLL reset */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0001);
|
||||||
|
|
||||||
|
/* Bandgap curvature correction to correct default */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0038, 0x0000, 0x0010);
|
||||||
|
|
||||||
|
/* Run RCAL */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x0038);
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003b);
|
||||||
|
udelay(2);
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003f);
|
||||||
|
mdelay(5);
|
||||||
|
|
||||||
|
/* AFE_CAL_CONFIG_0, Vref=1000, Target=10, averaging enabled */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x1c82);
|
||||||
|
/* AFE_CAL_CONFIG_0, no reset and analog powerup */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e82);
|
||||||
|
udelay(2);
|
||||||
|
/* AFE_CAL_CONFIG_0, start calibration */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f82);
|
||||||
|
udelay(100);
|
||||||
|
/* AFE_CAL_CONFIG_0, clear start calibration, set HiBW */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e86);
|
||||||
|
udelay(2);
|
||||||
|
/* AFE_CAL_CONFIG_0, start calibration with hi BW mode set */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f86);
|
||||||
|
udelay(100);
|
||||||
|
|
||||||
|
/* Adjust 10BT amplitude additional +7% and 100BT +2% */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7ea);
|
||||||
|
/* Adjust 1G mode amplitude and 1G testmode1 */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0038, 0x0002, 0xede0);
|
||||||
|
|
||||||
|
/* Read CORE_EXPA9 */
|
||||||
|
tmp = bcm_phy_read_exp(phydev, 0x00a9);
|
||||||
|
/* CORE_EXPA9[6:1] is rcalcode[5:0] */
|
||||||
|
rcalcode = (tmp & 0x7e) / 2;
|
||||||
|
/* Correct RCAL code + 1 is -1% rprogr, LP: +16 */
|
||||||
|
rcalnewcodelp = rcalcode + 16;
|
||||||
|
/* Correct RCAL code + 1 is -15 rprogr, 11: +10 */
|
||||||
|
rcalnewcode11 = rcalcode + 10;
|
||||||
|
/* Saturate if necessary */
|
||||||
|
if (rcalnewcodelp > 0x3f)
|
||||||
|
rcalnewcodelp = 0x3f;
|
||||||
|
if (rcalnewcode11 > 0x3f)
|
||||||
|
rcalnewcode11 = 0x3f;
|
||||||
|
/* REXT=1 BYP=1 RCAL_st1<5:0>=new rcal code */
|
||||||
|
tmp = 0x00f8 + rcalnewcodelp * 256;
|
||||||
|
/* Program into AFE_CAL_CONFIG_2 */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, tmp);
|
||||||
|
/* AFE_BIAS_CONFIG_0 10BT bias code (Bias: E4) */
|
||||||
|
bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7e4);
|
||||||
|
/* invert adc clock output and 'adc refp ldo current To correct
|
||||||
|
* default
|
||||||
|
*/
|
||||||
|
bcm_phy_write_misc(phydev, 0x003b, 0x0000, 0x8002);
|
||||||
|
/* 100BT stair case, high BW, 1G stair case, alternate encode */
|
||||||
|
bcm_phy_write_misc(phydev, 0x003c, 0x0003, 0xf882);
|
||||||
|
/* 1000BT DAC transition method per Erol, bits[32], DAC Shuffle
|
||||||
|
* sequence 1 + 10BT imp adjust bits
|
||||||
|
*/
|
||||||
|
bcm_phy_write_misc(phydev, 0x003d, 0x0000, 0x3201);
|
||||||
|
/* Non-overlap fix */
|
||||||
|
bcm_phy_write_misc(phydev, 0x003a, 0x0002, 0x0c00);
|
||||||
|
|
||||||
|
/* pwdb override (rxconfig<5>) to turn on RX LDO indpendent of
|
||||||
|
* pwdb controls from DSP_TAP10
|
||||||
|
*/
|
||||||
|
bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0020);
|
||||||
|
|
||||||
|
/* Remove references to channel 2 and 3 */
|
||||||
|
bcm_phy_write_misc(phydev, 0x003b, 0x0002, 0x0000);
|
||||||
|
bcm_phy_write_misc(phydev, 0x003b, 0x0003, 0x0000);
|
||||||
|
|
||||||
|
/* Set cal_bypassb bit rxconfig<43> */
|
||||||
|
bcm_phy_write_misc(phydev, 0x003a, 0x0003, 0x0800);
|
||||||
|
udelay(2);
|
||||||
|
|
||||||
|
/* Revert pwdb_override (rxconfig<5>) to 0 so that the RX pwr
|
||||||
|
* is controlled by DSP.
|
||||||
|
*/
|
||||||
|
bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0000);
|
||||||
|
|
||||||
|
/* Drop LSB */
|
||||||
|
rcalnewcode11d2 = (rcalnewcode11 & 0xfffe) / 2;
|
||||||
|
tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0001);
|
||||||
|
/* Clear bits [11:5] */
|
||||||
|
tmp &= ~0xfe0;
|
||||||
|
/* set txcfg_ch0<5>=1 (enable + set local rcal) */
|
||||||
|
tmp |= 0x0020 | (rcalnewcode11d2 * 64);
|
||||||
|
bcm_phy_write_misc(phydev, 0x003d, 0x0001, tmp);
|
||||||
|
bcm_phy_write_misc(phydev, 0x003d, 0x0002, tmp);
|
||||||
|
|
||||||
|
tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0000);
|
||||||
|
/* set txcfg<45:44>=11 (enable Rextra + invert fullscaledetect)
|
||||||
|
*/
|
||||||
|
tmp &= ~0x3000;
|
||||||
|
tmp |= 0x3000;
|
||||||
|
bcm_phy_write_misc(phydev, 0x003d, 0x0000, tmp);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bcm7xxx_16nm_ephy_config_init(struct phy_device *phydev)
|
||||||
|
{
|
||||||
|
int ret, val;
|
||||||
|
|
||||||
|
ret = bcm7xxx_16nm_ephy_afe_config(phydev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bcm_phy_set_eee(phydev, true);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
val = ret;
|
||||||
|
|
||||||
|
/* Auto power down of DLL enabled,
|
||||||
|
* TXC/RXC disabled during auto power down.
|
||||||
|
*/
|
||||||
|
val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
|
||||||
|
val |= BIT(8);
|
||||||
|
|
||||||
|
ret = bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return bcm_phy_enable_apd(phydev, true);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bcm7xxx_16nm_ephy_resume(struct phy_device *phydev)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Re-apply workarounds coming out suspend/resume */
|
||||||
|
ret = bcm7xxx_16nm_ephy_config_init(phydev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return genphy_config_aneg(phydev);
|
||||||
|
}
|
||||||
|
|
||||||
static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
|
static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
|
||||||
{
|
{
|
||||||
int ret;
|
int ret;
|
||||||
|
|
@ -610,9 +794,25 @@ static void bcm7xxx_28nm_remove(struct phy_device *phydev)
|
||||||
.resume = bcm7xxx_config_init, \
|
.resume = bcm7xxx_config_init, \
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#define BCM7XXX_16NM_EPHY(_oui, _name) \
|
||||||
|
{ \
|
||||||
|
.phy_id = (_oui), \
|
||||||
|
.phy_id_mask = 0xfffffff0, \
|
||||||
|
.name = _name, \
|
||||||
|
/* PHY_BASIC_FEATURES */ \
|
||||||
|
.flags = PHY_IS_INTERNAL, \
|
||||||
|
.probe = bcm7xxx_28nm_probe, \
|
||||||
|
.remove = bcm7xxx_28nm_remove, \
|
||||||
|
.config_init = bcm7xxx_16nm_ephy_config_init, \
|
||||||
|
.config_aneg = genphy_config_aneg, \
|
||||||
|
.read_status = genphy_read_status, \
|
||||||
|
.resume = bcm7xxx_16nm_ephy_resume, \
|
||||||
|
}
|
||||||
|
|
||||||
static struct phy_driver bcm7xxx_driver[] = {
|
static struct phy_driver bcm7xxx_driver[] = {
|
||||||
BCM7XXX_28NM_EPHY(PHY_ID_BCM72113, "Broadcom BCM72113"),
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM72113, "Broadcom BCM72113"),
|
||||||
BCM7XXX_28NM_EPHY(PHY_ID_BCM72116, "Broadcom BCM72116"),
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM72116, "Broadcom BCM72116"),
|
||||||
|
BCM7XXX_16NM_EPHY(PHY_ID_BCM72165, "Broadcom BCM72165"),
|
||||||
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
|
||||||
BCM7XXX_28NM_EPHY(PHY_ID_BCM7255, "Broadcom BCM7255"),
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7255, "Broadcom BCM7255"),
|
||||||
BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
|
||||||
|
|
@ -635,6 +835,7 @@ static struct phy_driver bcm7xxx_driver[] = {
|
||||||
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
||||||
{ PHY_ID_BCM72113, 0xfffffff0 },
|
{ PHY_ID_BCM72113, 0xfffffff0 },
|
||||||
{ PHY_ID_BCM72116, 0xfffffff0, },
|
{ PHY_ID_BCM72116, 0xfffffff0, },
|
||||||
|
{ PHY_ID_BCM72165, 0xfffffff0, },
|
||||||
{ PHY_ID_BCM7250, 0xfffffff0, },
|
{ PHY_ID_BCM7250, 0xfffffff0, },
|
||||||
{ PHY_ID_BCM7255, 0xfffffff0, },
|
{ PHY_ID_BCM7255, 0xfffffff0, },
|
||||||
{ PHY_ID_BCM7260, 0xfffffff0, },
|
{ PHY_ID_BCM7260, 0xfffffff0, },
|
||||||
|
|
|
||||||
|
|
@ -32,6 +32,7 @@
|
||||||
|
|
||||||
#define PHY_ID_BCM72113 0x35905310
|
#define PHY_ID_BCM72113 0x35905310
|
||||||
#define PHY_ID_BCM72116 0x35905350
|
#define PHY_ID_BCM72116 0x35905350
|
||||||
|
#define PHY_ID_BCM72165 0x35905340
|
||||||
#define PHY_ID_BCM7250 0xae025280
|
#define PHY_ID_BCM7250 0xae025280
|
||||||
#define PHY_ID_BCM7255 0xae025120
|
#define PHY_ID_BCM7255 0xae025120
|
||||||
#define PHY_ID_BCM7260 0xae025190
|
#define PHY_ID_BCM7260 0xae025190
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue