forked from mirrors/linux
200 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
7d4e49a77d |
- The 3 patch series "hung_task: extend blocking task stacktrace dump to
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
||
|
Ilya Leoshkevich
|
c164679bed |
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
Using lx-symbols during s390 early boot fails with:
Error occurred in Python: 'utf-8' codec can't decode byte 0xcb in position 0: invalid continuation byte
The reason is that s390 decompressor's startup_kernel() does not create
vmcoreinfo note, and sets vmcore_info to kernel's physical base. This
confuses get_vmcore_s390().
Fix by handling this special case. Extract vm_layout.kaslr_offset from
the kernel image in physical memory, which is placed there by the
decompressor using the __bootdata_preserved mechanism, and generate a
synthetic vmcoreinfo note from it.
Link: https://lkml.kernel.org/r/20250515155811.114392-4-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Ilya Leoshkevich
|
e97c4a27cb |
scripts/gdb/symbols: factor out pagination_off()
Move the code that turns off pagination into a separate function. It will be useful later in order to prevent hangs when loading symbols for kernel image in physical memory during s390 early boot. Link: https://lkml.kernel.org/r/20250515155811.114392-3-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
3545414f25 |
scripts/gdb/symbols: factor out get_vmlinux()
Patch series "scripts/gdb/symbols: determine KASLR offset on s390 during
early boot".
I noticed that debugging s390 early boot using the support I introduced in
commit
|
||
|
Kirill A. Shutemov
|
1bffe6f689 |
x86/mm/64: Always use dynamic memory layout
Dynamic memory layout is used by KASLR and 5-level paging. CONFIG_X86_5LEVEL is going to be removed, making 5-level paging support unconditional which requires unconditional support of dynamic memory layout. Remove CONFIG_DYNAMIC_MEMORY_LAYOUT. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250516123306.3812286-2-kirill.shutemov@linux.intel.com |
||
|
Illia Ostapyshyn
|
09e1d93a42 |
scripts/gdb: update documentation for lx_per_cpu
Commit |
||
|
Illia Ostapyshyn
|
6be7045c77 |
scripts/gdb: fix kgdb probing on single-core systems
Patch series "scripts/gdb: Fixes related to lx_per_cpu()". These patches (1) fix kgdb detection on systems featuring a single CPU and (2) update the documentation to reflect the current usage of lx_per_cpu() and update an outdated example of its usage. This patch (of 2): When requested the list of threads via qfThreadInfo, gdb_cmd_query in kernel/debug/gdbstub.c first returns "shadow" threads for CPUs followed by the actual tasks in the system. Extended qThreadExtraInfo queries yield "shadowCPU%d" as the name for the CPU core threads. This behavior is used by get_gdbserver_type() to probe for KGDB by matching the name for the thread 2 against "shadowCPU". This breaks down on single-core systems, where thread 2 is the first nonshadow thread. Request the name for thread 1 instead. As GDB assigns thread IDs in the order of their appearance, it is safe to assume shadowCPU0 at ID 1 as long as CPU0 is not hotplugged. Before: (gdb) info threads Id Target Id Frame 1 Thread 4294967294 (shadowCPU0) kgdb_breakpoint () * 2 Thread 1 (swapper/0) kgdb_breakpoint () 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () ... (gdb) p $lx_current().comm Sorry, obtaining the current CPU is not yet supported with this gdb server. After: (gdb) info threads Id Target Id Frame 1 Thread 4294967294 (shadowCPU0) kgdb_breakpoint () * 2 Thread 1 (swapper/0) kgdb_breakpoint () 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () ... (gdb) p $lx_current().comm $1 = "swapper/0\000\000\000\000\000\000" Link: https://lkml.kernel.org/r/20250503123234.2407184-1-illia@yshyn.com Link: https://lkml.kernel.org/r/20250503123234.2407184-2-illia@yshyn.com Signed-off-by: Illia Ostapyshyn <illia@yshyn.com> Cc: Alex Shi <alexs@kernel.org> Cc: Brendan Jackman <jackmanb@google.com> Cc: Dongliang Mu <dzm91@hust.edu.cn> Cc: Florian Rommel <mail@florommel.de> Cc: Hu Haowen <2023002089@link.tyut.edu.cn> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
d6b02199cd |
- The 7 patch series "powerpc/crash: use generic crashkernel
reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The 2 patch series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The 4 patch series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The 12 patch series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The 16 patch series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The 7 patch series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The 2 patch series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The 4 patch series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq r6khQUIcQImPPcjFqEFpuiSOU0MBZA0= =Kii8 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
|
Ilya Leoshkevich
|
28939c3e99 |
scripts/gdb/symbols: determine KASLR offset on s390
Use QEMU's qemu.PhyMemMode [1] functionality to read vmcore from the physical memory the same way the existing dump tooling does this. Gracefully handle non-QEMU targets, early boot, and memory corruptions; print a warning if such situation is detected. [1] https://qemu-project.gitlab.io/qemu/system/gdb.html#examining-physical-memory Link: https://lkml.kernel.org/r/20250303110437.79070-1-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Antonio Quartulli
|
e0349c46cb |
scripts/gdb/linux/symbols.py: address changes to module_sect_attrs
When loading symbols from kernel modules we used to iterate from 0 to module_sect_attrs::nsections, in order to retrieve their name and address. However module_sect_attrs::nsections has been removed from the struct by a previous commit. Re-arrange the iteration by accessing all items in module_sect_attrs::grp::bin_attrs[] until NULL is found (it's a NULL terminated array). At the same time the symbol address cannot be extracted from module_sect_attrs::attrs[]::address anymore because it has also been deleted. Fetch it from module_sect_attrs::grp::bin_attrs[]::private as described in |
||
|
Brendan Jackman
|
4022918876 |
scripts/gdb: add $lx_per_cpu_ptr()
We currently have $lx_per_cpu() which works fine for stuff that kernel code would access via per_cpu(). But this doesn't work for stuff that kernel code accesses via per_cpu_ptr(): (gdb) p $lx_per_cpu(node_data[1].node_zones[2]->per_cpu_pageset) Cannot access memory at address 0xffff11105fbd6c28 This is because we take the address of the pointer and use that as the offset, instead of using the stored value. Add a GDB version that mirrors the kernel API, which uses the pointer value. To be consistent with per_cpu_ptr(), we need to return the pointer value instead of dereferencing it for the user. Therefore, move the existing dereference out of the per_cpu() Python helper and do that only in the $lx_per_cpu() implementation. Link: https://lkml.kernel.org/r/20250220-lx-per-cpu-ptr-v2-1-945dee8d8d38@google.com Signed-off-by: Brendan Jackman <jackmanb@google.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Florian Rommel <mail@florommel.de> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Brian Gerst
|
a1e4cc0155 |
x86/percpu: Move current_task to percpu hot section
No functional change. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Uros Bizjak <ubizjak@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250303165246.2175811-10-brgerst@gmail.com |
||
|
Jan Kiszka
|
4ebc417ef9 |
scripts/gdb: fix aarch64 userspace detection in get_current_task
At least recent gdb releases (seen with 14.2) return SP_EL0 as signed long which lets the right-shift always return 0. Link: https://lkml.kernel.org/r/dcd2fabc-9131-4b48-8419-6444e2d67454@siemens.com Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Barry Song <baohua@kernel.org> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Etienne Buira
|
2c259a91d8 |
gdb: lx-symbols: do not error out on monolithic build
This avoids spurious message: (gdb) lx-symbols loading vmlinux No source file named kernel/module/main.c. Link: https://lkml.kernel.org/r/Zy5ALByQtpO-ddh4@Z926fQmE5jqhFMgp6 Signed-off-by: Etienne Buira <etienne.buira@free.fr> Cc: Andrew Ballance <andrewjballance@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kuan-Ying Lee
|
0833952c07 |
scripts/gdb: add 'lx-kasan_mem_to_shadow' command
This command allows users to quickly translate memory address to the kasan shadow memory address. Example output: (gdb) lx-kasan_mem_to_shadow 0xffff000019acc008 shadow addr: 0xffff600003359801 Link: https://lkml.kernel.org/r/20240723064902.124154-6-kuan-ying.lee@canonical.com Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kuan-Ying Lee
|
35249f68b5 |
scripts/gdb: add 'lx-stack_depot_lookup' command.
This command allows users to quickly retrieve a stacktrace using a handle obtained from a memory coredump. Example output: (gdb) lx-stack_depot_lookup 0x00c80300 0xffff8000807965b4 <kmem_cache_alloc_noprof+660>: mov x20, x0 0xffff800081a077d8 <kmem_cache_oob_alloc+76>: mov x1, x0 0xffff800081a079a0 <test_version_show+100>: cbnz w0, 0xffff800081a07968 <test_version_show+44> 0xffff800082f4a3fc <kobj_attr_show+60>: ldr x19, [sp, #16] 0xffff800080a0fb34 <sysfs_kf_seq_show+460>: ldp x3, x4, [sp, #96] 0xffff800080a0a550 <kernfs_seq_show+296>: ldp x19, x20, [sp, #16] 0xffff8000808e7b40 <seq_read_iter+836>: mov w5, w0 0xffff800080a0b8ac <kernfs_fop_read_iter+804>: mov x23, x0 0xffff800080914a48 <copy_splice_read+972>: mov x6, x0 0xffff8000809151c4 <do_splice_read+348>: ldr x21, [sp, #32] Link: https://lkml.kernel.org/r/20240723064902.124154-5-kuan-ying.lee@canonical.com Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kuan-Ying Lee
|
4b183f6139 |
scripts/gdb: fix lx-mounts command error
(gdb) lx-mounts
mount super_block devname pathname fstype options
Python Exception <class 'gdb.error'>: There is no member named list.
Error occurred in Python: There is no member named list.
We encounter the above issue after commit
|
||
|
Kuan-Ying Lee
|
0c77e103c4 |
scripts/gdb: add iteration function for rbtree
Add inorder iteration function for rbtree usage.
This is a preparation patch for the next patch to fix the gdb mounts
issue.
Link: https://lkml.kernel.org/r/20240723064902.124154-3-kuan-ying.lee@canonical.com
Fixes:
|
||
|
Kuan-Ying Lee
|
a633a4b800 |
scripts/gdb: fix timerlist parsing issue
Patch series "Fix some GDB command error and add some GDB commands", v3. Fix some GDB command errors and add some useful GDB commands. This patch (of 5): Commit |
||
|
Linus Torvalds
|
527eff227d |
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg= =Stxz -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - In the series "treewide: Refactor heap related implementation", Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. * tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits) ia64: scrub ia64 from poison.h watchdog/perf: properly initialize the turbo mode timestamp and rearm counter tsacct: replace strncpy() with strscpy() lib/bch.c: use swap() to improve code test_bpf: convert comma to semicolon init/modpost: conditionally check section mismatch to __meminit* init: remove unused __MEMINIT* macros nilfs2: Constify struct kobj_type nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro math: rational: add missing MODULE_DESCRIPTION() macro lib/zlib: add missing MODULE_DESCRIPTION() macro fs: ufs: add MODULE_DESCRIPTION() lib/rbtree.c: fix the example typo ocfs2: add bounds checking to ocfs2_check_dir_entry() fs: add kernel-doc comments to ocfs2_prepare_orphan_dir() coredump: simplify zap_process() selftests/fpu: add missing MODULE_DESCRIPTION() macro compiler.h: simplify data_race() macro build-id: require program headers to be right after ELF header resource: add missing MODULE_DESCRIPTION() ... |
||
|
Kuan-Ying Lee
|
9d938f40b2 |
scripts/gdb: rename pool_index to pool_index_plus_1
We encounter the following issue after commit |
||
|
Kuan-Ying Lee
|
7d8742bf85 |
scripts/gdb: change VA_BITS_MIN when we use 16K page
Change VA_BITS_MIN when we use 16K page.
Link: https://lkml.kernel.org/r/20240619074911.100434-6-kuan-ying.lee@canonical.com
Fixes:
|
||
|
Kuan-Ying Lee
|
04a40baec0 |
scripts/gdb: set vabits_actual based on TCR_EL1
We encounter the following issue after commit |
||
|
Kuan-Ying Lee
|
3c0e9a2004 |
scripts/gdb: change the layout of vmemmap
We need to change the layout of vmemmap in gdb scripts after commit |
||
|
Kuan-Ying Lee
|
f2eaed1565 |
scripts/gdb: rework module VA range
After we enlarge the module VA range, we also change the module VA
range in gdb scripts.
Link: https://lkml.kernel.org/r/20240619074911.100434-3-kuan-ying.lee@canonical.com
Fixes:
|
||
|
Kuan-Ying Lee
|
63ce5947ef |
scripts/gdb: redefine MAX_ORDER sanely
Patch series "Fix GDB command error".
This patchset fixes some GDB command errors.
1. Since memory layout of AARCH64 has been changed, we need to modify
the layout in GDB scripts as well.
2. Fix pool_index naming of stackdepot.
This patch (of 6):
Change the definition of MAX_ORDER to be inclusive.
Link: https://lkml.kernel.org/r/20240619074911.100434-1-kuan-ying.lee@canonical.com
Link: https://lkml.kernel.org/r/20240619074911.100434-2-kuan-ying.lee@canonical.com
Fixes:
|
||
|
Joel Granados
|
a11aaf6d0b |
kbuild: scripts/gdb: bring the "abspath" back
Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes:
|
||
|
Douglas Anderson
|
659bbf7e1b |
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
Recently we went through the source tree and replaced
$(srctree)/$(src) w/ $(src). However, the gdb scripts Makefile had a
hidden $(srctree)/$(src) that looked like this:
$(abspath $(srctree))/$(src)
Because we missed that then my installed kernel had symlinks that
looked like this:
__init__.py ->
${INSTALL_DIR}/$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Let's also replace the midden $(abspath $(srctree))/$(src) with
$(src). Now:
__init__.py ->
$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Fixes:
|
||
|
Linus Torvalds
|
eb6a9339ef |
Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo: Clean
up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb: Fixes
for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over macros.
The series is "codingstyle: avoid unused parameters for a function-like
macro".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkpLYQAKCRDdBJ7gKXxA
jo9NAQDctSD3TMXqxqCHLaEpCaYTYzi6TGAVHjgkqGzOt7tYjAD/ZIzgcmRwthjP
R7SSiSgZ7UnP9JRn16DQILmFeaoG1gs=
=lYhr
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
||
|
Linus Torvalds
|
ff9a79307f |
Kbuild updates for v6.10
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
||
|
Masahiro Yamada
|
b1992c3772 |
kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
||
|
Florian Rommel
|
40eea5abbb |
scripts/gdb: fix detection of current CPU in KGDB
Directly read the current CPU number from the kgdb_active variable. Before, the active CPU was obtained through the current task, which required searching the task list for the pid of GDB's selected thread. Obtaining the pid was buggy: GDB may use selected_thread().ptid[1] (LWPID) instead of .ptid[2] (TID) to store the threads pid; see https://sourceware.org/gdb/current/onlinedocs/gdb.html/Threads-In-Python.html As a result, the detection could return the wrong CPU number, leading to incorrect results for $lx_per_cpu and $lx_current. As a side effect, the patch significantly speeds up $lx_per_cpu and $lx_current in KGDB by avoiding the task-list iteration. Link: https://lkml.kernel.org/r/20240425153501.749966-5-mail@florommel.de Signed-off-by: Florian Rommel <mail@florommel.de> Cc: Andrew Jones <ajones@ventanamicro.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Florian Rommel
|
7566b063e9 |
scripts/gdb: make get_thread_info accept pointers
get_thread_info ($lx_thread_info) only accepted a dereferenced task
parameter. Passing a pointer to a task_struct (like $lx_per_cpu does with
KGDB) threw an exception.
With this patch, both (dereferenced values and pointers) are accepted.
Before (on x86, KGDB):
>>> p $lx_per_cpu(cpu_info)
Traceback (most recent call last):
File "./scripts/gdb/linux/cpus.py", line 158, in invoke
return per_cpu(var_ptr, cpu)
^^^^^^^^^^^^^^^^^^^^^
File "./scripts/gdb/linux/cpus.py", line 42, in per_cpu
cpu = get_current_cpu()
^^^^^^^^^^^^^^^^^
File "./scripts/gdb/linux/cpus.py", line 33, in get_current_cpu
return tasks.get_thread_info(tasks.get_task_by_pid(tid))['cpu']
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "./scripts/gdb/linux/tasks.py", line 88, in get_thread_info
if task.type.fields()[0].type == thread_info_type.get_type():
~~~~~~~~~~~~~~~~~~^^^
IndexError: list index out of range
Link: https://lkml.kernel.org/r/20240425153501.749966-4-mail@florommel.de
Signed-off-by: Florian Rommel <mail@florommel.de>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Florian Rommel
|
db08c53fdd |
scripts/gdb: fix parameter handling in $lx_per_cpu
Before, the script tried to get the address by constructing a pointer to
the parameter (by name). However, since GDB now passes the parameter as a
GdbValue, we cannot get its name. Instead, we retrieve the address
through GdbValue's address attribute.
Before:
>>> p $lx_per_cpu(cpu_info)
Traceback (most recent call last):
File "./scripts/gdb/linux/cpus.py", line 152, in invoke
var_ptr = gdb.parse_and_eval("&" + var_name.string())
^^^^^^^^^^^^^^^^^
gdb.error: Trying to read string with inappropriate type `struct cpuinfo_x86'.
Link: https://lkml.kernel.org/r/20240425153501.749966-3-mail@florommel.de
Signed-off-by: Florian Rommel <mail@florommel.de>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Florian Rommel
|
ec0b6d17a5 |
scripts/gdb: fix failing KGDB detection during probe
Patch series "scripts/gdb: Fixes for $lx_current and $lx_per_cpu". This series fixes several bugs in the GDB scripts related to the $lx_current and $lx_per_cpu functions. The changes were tested with GDB 10, 11, 12, 13, and 14. Patch 1 fixes false-negative results when probing for KGDB Patch 2 fixes the $lx_per_cpu function, which is currently non-functional in QEMU-GDB and KGDB. Patch 3 fixes an additional bug in $lx_per_cpu that occurs with KGDB. Patch 4 fixes the incorrect detection of the current CPU number in KGDB, which silently breaks $lx_per_cpu and $lx_current. This patch (of 4): The KGDB probe function sometimes failed to detect KGDB for SMP machines as it assumed that task 2 (kthreadd) is running on CPU 0, which is not necessarily the case. Now, the detection is agnostic to kthreadd's CPU. Link: https://lkml.kernel.org/r/20240425153501.749966-1-mail@florommel.de Link: https://lkml.kernel.org/r/20240425153501.749966-2-mail@florommel.de Signed-off-by: Florian Rommel <mail@florommel.de> Cc: Andrew Jones <ajones@ventanamicro.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Bitao Hu
|
86d2a2f51f |
genirq: Convert kstat_irqs to a struct
The irq_desc::kstat_irqs member is a per-CPU variable of type int, which is only capable of counting. A snapshot mechanism for interrupt statistics will be added soon, which requires an additional variable to store the snapshot. To facilitate expansion, convert kstat_irqs here to a struct containing only the count. Originally-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240411074134.30922-2-yaoma@linux.alibaba.com |
||
|
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
65d287c7eb |
asm-generic updates for 6.9
Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through Kconfig,
intended to help with a vdso rework that needs the constant but
cannot include the normal kernel headers when building the compat
VDSO on arm64 and potentially others.
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused.
-----BEGIN PGP SIGNATURE-----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=X4Cs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
||
|
Andrew Ballance
|
ded79af42f |
scripts/gdb/symbols: fix invalid escape sequence warning
With python 3.12, '\.' results in this warning
SyntaxWarning: invalid escape sequence '\.'
Link: https://lkml.kernel.org/r/20240304012507.240380-1-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Koudai Iwahori <koudai@google.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Arnd Bergmann
|
d3e5bab923 |
arch: simplify architecture specific page size configuration
arc, arm64, parisc and powerpc all have their own Kconfig symbols in place of the common CONFIG_PAGE_SIZE_4KB symbols. Change these so the common symbols are the ones that are actually used, while leaving the arhcitecture specific ones as the user visible place for configuring it, to avoid breaking user configs. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc32) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Kuan-Ying Lee
|
0040f2c553 |
scripts/gdb/vmalloc: fix vmallocinfo error
The patch series "Mitigate a vmap lock contention" removes vmap_area_list, which will break the gdb vmallocinfo command: (gdb) lx-vmallocinfo Python Exception <class 'gdb.error'>: No symbol "vmap_area_list" in current context. Error occurred in Python: No symbol "vmap_area_list" in current context. So we can instead use vmap_nodes to iterate all vmallocinfo. Link: https://lkml.kernel.org/r/20240207085856.11190-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Casper Li <casper.li@mediatek.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Paolo Bonzini
|
dcf0926e9b |
x86: replace CONFIG_HAVE_KVM with IS_ENABLED(CONFIG_KVM)
It is more accurate to check if KVM is enabled, instead of having the architecture say so. Architectures always "have" KVM, so for example checking CONFIG_HAVE_KVM in x86 code is pointless, but if KVM is disabled in a specific build, there is no need for support code. Alternatively, many of the #ifdefs could simply be deleted. However, this would add completely dead code. For example, when KVM is disabled, there should not be any posted interrupts, i.e. NOT wiring up the "dummy" handlers and treating IRQs on those vectors as spurious is the right thing to do. Cc: x86@kernel.org Cc: kbingham@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
b5f66ba2d0 |
Kbuild updates for v6.8
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
-----BEGIN PGP SIGNATURE-----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=HXZB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
* tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits)
kbuild: deb-pkg: use debian/<package> for tmpdir
kbuild: deb-pkg: move 'make headers' to build-arch
kbuild: deb-pkg: do not search for 'scripts' directory under arch/
kbuild: deb-pkg: use build ID instead of debug link for dbg package
kbuild: deb-pkg: use more debhelper commands in builddeb
kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules
kbuild: deb-pkg: allow to run debian/rules from output directory
kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed
kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules
kbuild: deb-pkg: factor out common Make options in debian/rules
kbuild: deb-pkg: hard-code Build-Depends
kbuild: deb-pkg: split debian/copyright from the mkdebian script
gen_init_cpio: Apply mtime supplied by user to all file types
kbuild: resolve symlinks for O= properly
docs: dev-tools: Add UAPI checker documentation
check-uapi: Introduce check-uapi.sh
scripts: Introduce a default git.orderFile
kconfig: WERROR unmet symbol dependency
Add .editorconfig file for basic formatting
kconfig: Use KCONFIG_CONFIG instead of .config
...
|
||
|
Kuan-Ying Lee
|
e52ec6a2db |
scripts/gdb: remove exception handling and refine print format
1. When we crash on a page, we want to check what happened on this page instead of skipping this page by try-except block. Thus, removing the try-except block. 2. Remove redundant comma and print the task name properly. Link: https://lkml.kernel.org/r/20231127070404.4192-4-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kuan-Ying Lee
|
125e9987a2 |
scripts/gdb/stackdepot: rename pool_index to pools_num
After stackdepot evicting support patchset[1], we rename pool_index to pools_num. To avoid from the below issue, we rename consistently in gdb scripts. Python Exception <class 'gdb.error'>: No symbol "pool_index" in current context. Error occurred in Python: No symbol "pool_index" in current context. [1] https://lore.kernel.org/linux-mm/cover.1700502145.git.andreyknvl@google.com/ Link: https://lkml.kernel.org/r/20231129065142.13375-3-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Florian Fainelli
|
801a2b1b49 |
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.
Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes:
|
||
|
Kuan-Ying Lee
|
854f2764b5 |
scripts/gdb/tasks: fix lx-ps command error
Since commit |
||
|
Masahiro Yamada
|
0df8e97085 |
scripts: clean up IA-64 code
A little more janitorial work after commit
|
||
|
Ben Wolsieffer
|
6620999f0d |
scripts/gdb/vmalloc: disable on no-MMU
vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:
Traceback (most recent call last):
File "<...>/vmlinux-gdb.py", line 51, in <module>
import linux.vmalloc
File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
vmap_area_ptr_type = vmap_area_type.get_type().pointer()
^^^^^^^^^^^^^^^^^^^^^^^^^
File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
self._type = gdb.lookup_type(self._name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.
To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.
Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes:
|