pcie_bif ras blocks needs to be initialized as early
as possible to handle fatal error detected in hw_init
phase. also align the pcie_bif ras sw_init with other
ras blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ignore ras umc bad page threshold by default, GPU initialization won't
be stopped in this mode.
v2: refine the description of bad_page_threshold.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a UMC bad page is reserved but not freed by an application, the
application may trigger uncorrectable error repeatly by accessing the page.
v2: add specific function to do the check.
v3: remove duplicate pages, calculate new added bad page number.
v4: reuse save_bad_pages to calculate new added bad page number.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]:
Amdgpu ras uses amdgpu_ras_is_supported to check whether
the ras block supports the ras function. amdgpu_ras_is_supported
uses .ras_enabled to determine whether the ras function of the
block is enabled.
But for special asic with mem ecc enabled but sram ecc not
enabled, some ras blocks support poison mode but their ras function
is not enabled on .ras_enabled, these ras blocks will run abnormally.
[How]:
If the ras block is not supported on .ras_enabled but the asic
supports poison mode and the ras block has ras configuration, it
can be considered that the ras block supports ras function.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]:
For special asic with mem ecc enabled but sram ecc
not enabled, some ras blocks can register their ras
configuration to ras list, but these ras blocks are not
enabled on .ras_enabled, so it can not get ras block
object using amdgpu_ras_get_ras_block.
[How]:
Remove ras block support check. Even if the ras block
checked is not in the ras list, it will return a null
pointer and will have no effect.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform gpu reset after gfx finishes processing
ras poison consumption on gfx_v11_0_3.
V2:
Move gfx poison consumption handler from hw_ops to ip
function level.
V3:
Adjust the calling position of amdgpu_gfx_poison_consumation_handler.
V4:
Since gfx v11_0_3 does not have .hw_ops instance, the .hw_ops null
pointer check in amdgpu_ras_interrupt_poison_consumption_handler
needs to be adjusted.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ras_block_late_init will be invoked in IP
specific ras_late_init call as a common helper for
all the IP blocks.
However, when amdgpu_ras_block_late_init call
amdgpu_ras_query_error_count to query ras error
counters, amdgpu_ras_query_error_count queries
all the IP blocks that support ras query interface.
This results to wrong error counters cached in
software copies when there are ras errors detected
at time zero or warm reset procedure. i.e., in
sdma_ras_late_init phase, it counts on sdma/mmhub
errors, while, in mmhub_ras_late_init phase, it
still counts on sdma/mmhub errors.
The change updates amdgpu_ras_query_error_count
interface to allow query specific ip error counter.
It introduces a new input parameter: query_info. if
query_info is NULL, it means query all the IP blocks,
otherwise, only query the ip block specified by
query_info.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. no need to query poison mode on SRIOV guest side, host can handle it.
2. define the function to simplify code.
v2: rename amdgpu_ras_poison_mode_query to amdgpu_ras_query_poison_mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support VCN/JPEG RAS in both bare metal and SRIOV environment.
v2: update commit description.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Injection on guest is not allowed.
v2: return directly in SRIOV environment.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the open-code with sysfs_emit() to simplify the code.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set support flag for VCN/JPEG 4.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code simpler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code more readable.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS error address translation algorithm is common
across dGPU and A + A platform as along as the SOC
integrates the same generation of UMC IP.
UMC RAS is managed by x86 MCA on A + A platform,
umc_ras in GPU driver is not initialized at all on
A + A platform. In such case, any umc_ras callback
implemented for dGPU config shouldn't be invoked
from A + A specific callback.
The change moves convert_error_address out of dGPU
umc_ras structure and makes it share between A + A
and dGPU config.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit dac6b80818.
This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.
Fixes: dac6b80818 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix some issues found by checkpatch script.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code reusable and remove redundant code.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the convert interface to simplify code.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the asic using smu v13_0_2, there is the following
warning when uninstalling amdgpu:
amdgpu: ras disable gfx failed poison:1 ret:-22.
[Why]:
For the asic using smu v13_0_2, the psp .suspend and
mode1reset is called before amdgpu_ras_pre_fini during
amdgpu uninstall, it has disabled all ras features and
reset the psp. Since the psp is reset, calling
amdgpu_ras_disable_all_features in amdgpu_ras_pre_fini
to disable ras features will fail.
[How]:
If all ras features are disabled, amdgpu_ras_disable_all_features
will not be called to disable all ras features again.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to reset error status since only umc ras supported on psp v13_0_0.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- introduce AMDGPU_SKIP_MODE2_RESET flag
- let mode2 reset fallback to default reset method if failed
v2: move this part out from the asic specific part
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move reset_context out of gpu recover function to make it configurable
for different reset purpose.
For the reset way of call gpu_recovery sysfs, force to use full reset
method. Otherwise, try soft reset by default if the related ASIC
supportted, if soft reset failed, will use full reset.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should not init whole ras bad page framework on sriov guest side
due to it is handled on host side.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX is the only IP block that RAS TA needs to program
the hardware when receiving enable_feature command.
Changed from V1:
remove amdgpu_ras_need_send_ras_feature inline function,
use GFX RAS block check directly.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We removed the wrapper that was queueing the recover function
into reset domain queue who was using this name.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save the extra usless work schedule.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the sequence for ras late init and separate ras reset error status
from query status.
v2: squash in fix from Candice
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support umc/gfx/sdma ras on guest side
Changed from V1:
move sriov judgment in amdgpu_ras_interrupt_fatal_error_handler
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qeury ras status before ras poison consumption handling, add more
comment and log.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable RAS IH if poison consumption handler is implemented.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fatal error handler is independent from general ras interrupt
handler since there is no related IH ring.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for general RAS poison consumption handler.
v2: remove callback function for poison consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for the implementation of poison consumption handler.
v2: separate umc handler from poison creation.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn and jpeg ras support options
V2: vcn and jpeg ras flag enabled for aldebaran asic only
V3: vcn and jpeg ras flag disabled for error counter query
Generic poison query interface added
VCN and JPEG ras enabled based on IP version check
V4: vcn and jpeg ras flag moved under ecc flag for dGPU
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should notice SMU to update bad channel info when detected
uncorrectable error in UMC block
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_fini_default in amdgpu_ras.c as
.ras_fini common function, which is called when
.ras_fini of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_fini to
initialize .ras_fini in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
centrally calls the .ras_fini function of all ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed warning reported by kernel test robot:
1.warning: variable 'ras_obj' is used uninitialized
whenever '||' condition is true.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turn previously global function into a static function to avoid the
following Clang warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2459:5: warning: no previous prototype
for function 'amdgpu_ras_block_late_init_default' [-Wmissing-prototypes]
int amdgpu_ras_block_late_init_default(struct amdgpu_device *adev,
^
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2459:1: note: declare 'static' if the
function is not intended to be used outside of this translation unit
int amdgpu_ras_block_late_init_default(struct amdgpu_device *adev,
^
static
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang build fails with
amdgpu_ras.c:2416:7: error: variable 'ras_obj' is used uninitialized
whenever 'if' condition is true
if (adev->in_suspend || amdgpu_in_reset(adev)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
amdgpu_ras.c:2453:6: note: uninitialized use occurs here
if (ras_obj->ras_cb)
^~~~~~~
There is a logic error in the error handler's labels.
ex/ The sysfs: is the last goto label in the normal code but
is the middle of error handler. Rework the error handler.
cleanup: is the first error, so it's handler should be last.
interrupt: is the second error, it's handler is next. interrupt:
handles the failure of amdgpu_ras_interrupt_add_hander() by
calling amdgpu_ras_interrupt_remove_handler(). This is wrong,
remove() assumes the interrupt has been setup, not torn down by
add(). Change the goto label to cleanup.
sysfs is the last error, it's handler should be first. sysfs:
handles the failure of amdgpu_ras_sysfs_create() by calling
amdgpu_ras_sysfs_remove(). But when the create() fails there
is nothing added so there is nothing to remove. This error
handler is not needed. Remove the error handler and change
goto label to interrupt.
Fixes: b293e891b0 ("drm/amdgpu: add helper function to do common ras_late_init/fini (v3)")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_init_default in amdgpu_ras.c as
.ras_late_init common function, which is called when
.ras_late_init of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_init to
initialize .ras_late_init in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define amdgpu_ras_late_init to call all ras blocks' .ras_late_init.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Merge amdgpu_ras_late_init to
amdgpu_ras_block_late_init.
2. Remove amdgpu_ras_late_init since no ras block
calls amdgpu_ras_late_init.
3. Merge amdgpu_ras_late_fini to
amdgpu_ras_block_late_fini.
4. Remove amdgpu_ras_late_fini since no ras block
calls amdgpu_ras_late_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to reduce redundant struct conversion, modify
operating sysfs and interrupt function interface parameters.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize amdgpu_nbio_ras_late_init/amdgpu_nbio_ras_fini function code.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_init to create sysfs nodes
and interrupt handles.
2. Define amdgpu_ras_block_late_fini to remove sysfs nodes
and interrupt handles.
3. Replace ras block variable members in struct
amdgpu_ras_block_object with struct ras_common_if, which
can make it easy to associate each ras block instance
with each ras block functional interface.
4. Add .ras_cb to struct amdgpu_ras_block_object.
5. Change each ras block to fit for the changement of struct
amdgpu_ras_block_object.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.18-2022-02-11-1:
amdgpu:
- Clean up of power management code
- Enable freesync video mode by default
- Clean up of RAS code
- Improve VRAM access for debug using SDMA
- Coding style cleanups
- SR-IOV fixes
- More display FP reorg
- TLB flush fixes for Arcuturus, Vega20
- Misc display fixes
- Rework special register access methods for SR-IOV
- DP2 fixes
- DP tunneling fixes
- DSC fixes
- More IP discovery cleanups
- Misc RAS fixes
- Enable both SMU i2c buses where applicable
- s2idle improvements
- DPCS header cleanup
- Add new CAP firmware support for SR-IOV
amdkfd:
- Misc cleanups
- SVM fixes
- CRIU support
- Clean up MQD manager
UAPI:
- Add interface to amdgpu CTX ioctl to request a stable power state for profiling
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207
- Add amdkfd support for CRIU
https://github.com/checkpoint-restore/criu/pull/1709
- Remove old unused amdkfd debugger interface
Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced
radeon:
- Fix error handling in radeon_driver_open_kms
- UVD suspend fix
- Misc fixes
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
The commit d5e8ff5f7b ("drm/amdgpu: Fixed the defect of soft lock caused by infinite loop")
had fixed this defect.
Revert workaround
commit a2170b4af6 ("drm/amdgpu: Add judgement to avoid infinite loop").
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MESA polls for errors every 2-3 seconds. Printing with dev_info() causes
the dmesg log to fill up with the same message, e.g,
[18028.206676] amdgpu 0000:0b:00.0: amdgpu: df doesn't config ras function.
Make it dev_dbg_once(), as it isn't something correctible during boot or
thereafter, so printing just once is sufficient. Also sanitize the message.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: yipechai <YiPeng.Chai@amd.com>
Fixes: 8b0fb0e967 ("drm/amdgpu: Modify gfx block to fit for the unified ras block data and ops")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The infinite loop causing soft lock occurs on multiple amdgpu cards
supporting ras feature.
2. This a workaround patch to fix 6492e1b07c.
It is valid for multiple amdgpu cards of the same type.
3. The root cause is that each GPU card device has a separate .ras_list
link header, but the instance and linked list node of each ras block
are unique. When each device is initialized, each ras instance will
repeatedly add link node to the device every time. In this way, only
the .ras_list of the last initialized device is completely correct.
the .ras_list->prev and .ras_list->next of the device initialzied
before can still point to the correct ras instance, but the prev
pointer and next pointer of the pointed ras instance both point to
the last initialized device's .ras_ list instead of the beginning
.ras_ list. When using list_for_each_entry_safe searches for
non-existent Ras nodes on devices other than the last device, the
last ras instance next pointer cannot always be equal to the
beginning .ras_list, so that the loop cannot be terminated, the
program enters a infinite loop.
BTW: Since the data and initialization process of each card are the same,
the link list between ras instances will not be destroyed every time
the device is initialized.
4. The soft locked logs are as follows:
[ 262.165690] CPU: 93 PID: 758 Comm: kworker/93:1 Tainted: G OE 5.13.0-27-generic #29~20.04.1-Ubuntu
[ 262.165695] Hardware name: Supermicro AS -4124GS-TNR/H12DSG-O-CPU, BIOS T20200717143848 07/17/2020
[ 262.165698] Workqueue: events amdgpu_ras_do_recovery [amdgpu]
[ 262.165980] RIP: 0010:amdgpu_ras_get_ras_block+0x86/0xd0 [amdgpu]
[ 262.166239] Code: 68 d8 4c 8d 71 d8 48 39 c3 74 54 49 8b 45 38 48 85 c0 74 32 44 89 fa 44 89 e6 4c 89 ef e8 82 e4 9b dc 85 c0 74 3c 49 8b 46 28 <49> 8d 56 28 4d 89 f5 48 83 e8 28 48 39 d3 74 25 49 89 c6 49 8b 45
[ 262.166243] RSP: 0018:ffffac908fa87d80 EFLAGS: 00000202
[ 262.166247] RAX: ffffffffc1394248 RBX: ffff91e4ab8d6e20 RCX: ffffffffc1394248
[ 262.166249] RDX: ffff91e4aa356e20 RSI: 000000000000000e RDI: ffff91e4ab8c0000
[ 262.166252] RBP: ffffac908fa87da8 R08: 0000000000000007 R09: 0000000000000001
[ 262.166254] R10: ffff91e4930b64ec R11: 0000000000000000 R12: 000000000000000e
[ 262.166256] R13: ffff91e4aa356df8 R14: ffffffffc1394320 R15: 0000000000000003
[ 262.166258] FS: 0000000000000000(0000) GS:ffff92238fb40000(0000) knlGS:0000000000000000
[ 262.166261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 262.166264] CR2: 00000001004865d0 CR3: 000000406d796000 CR4: 0000000000350ee0
[ 262.166267] Call Trace:
[ 262.166272] amdgpu_ras_do_recovery+0x130/0x290 [amdgpu]
[ 262.166529] ? psi_task_switch+0xd2/0x250
[ 262.166537] ? __switch_to+0x11d/0x460
[ 262.166542] ? __switch_to_asm+0x36/0x70
[ 262.166549] process_one_work+0x220/0x3c0
[ 262.166556] worker_thread+0x4d/0x3f0
[ 262.166560] ? process_one_work+0x3c0/0x3c0
[ 262.166563] kthread+0x12b/0x150
[ 262.166568] ? set_kthread_struct+0x40/0x40
[ 262.166571] ret_from_fork+0x22/0x30
Fixes: 6492e1b07c ("drm/amdgpu: Unify ras block interface for each ras block")
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create common amdgpu_umc_fill_error_record function for all versions
of UMC and clean up related codes.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit df4f0041c6.
Xgmi ras initialization had been moved from .late_init to early_init,
the defect of repeated calling amdgpu_ras_register_ras_block had been
fixed, so revert this patch.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code style warnings in amdgpu_ras:
1. ERROR: space required before the open parenthesis '('.
2. WARNING: line length of xxx exceeds 100 columns.
3. ERROR: "foo* bar" should be "foo *bar".
4. WARNING: unnecessary whitespace before a quoted newline.
5. WARNING: space prohibited before semicolon.
6. WARNING: suspect code indent for conditional statements.
7. WARNING: braces {} are not necessary for single statement blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping
-----BEGIN PGP SIGNATURE-----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=h74X
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
Use ARRAY_SIZE to get array length.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2725:16-17: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer insert ras blocks into ras_list if it already exists in ras_list.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move xgmi special error inject function from amdgpu_ras.c to xgmi block.
2. Support to use psp_ras_trigger_error as default error inject function in amdgpu_ras.c. If .ras_error_inject isn't defined in ras block, default error inject function will take effect.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify sdma block to fit for the unified ras block data and ops.
2.Change amdgpu_sdma_ras_funcs to amdgpu_sdma_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of sdma ras variable so that sdma ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register sdma ras block into amdgpu device ras block link list.
5.Remove the redundant code about sdma in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of sdma versions. If .ras_late_init and .ras_fini had been defined by the selected sdma version, the defined functions will take effect; if not defined, default fill them with amdgpu_sdma_ras_late_init and amdgpu_sdma_ras_fini.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify umc block to fit for the unified ras block data and ops.
2.Change amdgpu_umc_ras_funcs to amdgpu_umc_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of umc ras variable so that umc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register umc ras block into amdgpu device ras block link list.
5.Remove the redundant code about umc in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of umc versions. If .ras_late_init and .ras_fini had been defined by the selected umc version, the defined functions will take effect; if not defined, default fill them with amdgpu_umc_ras_late_init and amdgpu_umc_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify nbio block to fit for the unified ras block data and ops.
2.Change amdgpu_nbio_ras_funcs to amdgpu_nbio_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that nbio ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register nbio ras block into amdgpu device ras block link list.
5.Remove the redundant code about nbio in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mmhub block to fit for the unified ras block data and ops.
2.Change amdgpu_mmhub_ras_funcs to amdgpu_mmhub_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that mmhub ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register mmhub ras block into amdgpu device ras block link list. 5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of mmhub versions. If .ras_late_init and .ras_fini had been defined by the selected mmhub version, the defined functions will take effect; if not defined, default fill them with amdgpu_mmhub_ras_late_init and amdgpu_mmhub_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify hdp block to fit for the unified ras block data and ops.
2.Change amdgpu_hdp_ras_funcs to amdgpu_hdp_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of hdp ras variable so that hdp ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register hdp ras block into amdgpu device ras block link list.
5.Remove the redundant code about hdp in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gmc block to fit for the unified ras block data and ops.
2.Change amdgpu_xgmi_ras_funcs to amdgpu_xgmi_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gmc ras variable so that gmc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gmc ras block into amdgpu device ras block link list.
5.Remove the redundant code about gmc in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gfx block to fit for the unified ras block data and ops.
2.Change amdgpu_gfx_ras_funcs to amdgpu_gfx_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gfx ras variable so that gfx ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gfx ras block into amdgpu device ras block link list.
5.Remove the redundant code about gfx in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of gfx versions. If .ras_late_init and .ras_fini had been defined by the selected gfx version, the defined functions will take effect; if not defined, default fill with amdgpu_gfx_ras_late_init and amdgpu_gfx_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the compilation failed problem when other ras blocks' .h include amdgpu_ras.h.
v2: squash in forward declaration warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define unified ops interface for each block.
2. Add ras_block_match function pointer in ops interface, each ras block can customize specail match function to identify itself.
3. Add amdgpu_ras_block_match_default new function. If a ras block doesn't define .ras_block_match, default execute amdgpu_ras_block_match_default to identify this ras block.
4. Define unified basic ras block data for each ras block.
5. Create dedicated amdgpu device ras block link list to manage all of the ras blocks.
6. Add amdgpu_ras_register_ras_block new function interface for each ras block to register itself to ras controlling block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not allow exported amdgpu_vram_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call vram_mgr functions.
v2: pass adev's vram_mgr instead of adev
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Memory of err_data should be cleaned before usage
when there're multiple entry in ras ih.
Otherwise garbage data from last loop will be used.
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmHX1vMACgkQDHTzWXnE
hr6rAw/9ES5RO5N3Ku9foFk1CI9bqy1Kh663KLkkEc+rDdhKpiZbBnAsrKkZ9sGu
fNuHmWNN5nWXtDSOqHWuslt3F7Gh+qEBQtlkqC9mZsBm3bWB0aJK6E4QaJxfeSaK
ta6AmyGx8DaV+C69i86dnemQurYSDVjROd7LDPKnCU0Fye/JxiXSXQmXksKMFVxd
x5vmO9yfeDSg3EF+u1yB6nJNUYZBV0vhrAfjPqxPCRBXuQc7akuaglE/SFwlGnEk
vn0GjVHEQcRTqYKrHr64xvQxIoKXcJP0pkDUyT7KYCsyj8GJkvxkb7/ls5pp5DvL
SwyNg3J3vwUVP6w6GEvzf3ffG720qqUZvCbvLmE+A/t2DhGILiAm+HXSo43PTOW8
uagT7Gxma8dy8EovjSxioS9HPX8Gcu+S+XYavgOsevOZ7oeEt4f4TLW7LXsw9d6y
75FrMhiUpreab5hAh8Le0swuLYZHjdnJRdjSTqZJ/T6VdTdVftLT6IfwvSDx5CHy
cWuufgcAjd7xVTXFquHWYXWLTQkiSMGf1M02jx9IWolTd4Cm41LNBhqMEDHZLHJD
7ngGgoaREVDQ+MqjG90yfIwJFIpJPI3YOaHLi/Kznga+iDzFY6cyOQWW2vX7ZdY5
7+LJWsgGT8Feb7/bzD5hX1mYqJLxh1pWUIaqIKMl+7LJL7gTVU8=
=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
AMD systems currently lay out MCA bank types such that the type of bank
number "i" is either the same across all CPUs or is Reserved/Read-as-Zero.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS CS
3 SMU RAZ
Future AMD systems will lay out MCA bank types such that the type of
bank number "i" may be different across CPUs.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS NBIO
3 SMU RAZ
Change the structures that cache MCA bank types to be per-CPU and update
smca_get_bank_type() to handle this change.
Move some SMCA-specific structures to amd.c from mce.h, since they no
longer need to be global.
Break out the "count" for bank types from struct smca_hwid, since this
should provide a per-CPU count rather than a system-wide count.
Apply the "const" qualifier to the struct smca_hwid_mcatypes array. The
values in this array should not change at runtime.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-3-yazen.ghannam@amd.com
This commit fixes the compile-time warning below:
warning: no previous prototype for ‘amdgpu_ras_mca_query_error_status’
[-Wmissing-prototypes]
Changes since v1:
- As suggested by Alexander Deucher:
1. Make function static instead of adding prototype.
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAS poison mode is enabled by default on the platform.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
skip get ecc info for aldebarn through check ip version
do not affect other asic type
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is a workaround due to get ecc info failed during gpu recovery
[ 700.236122] amdgpu 0000:09:00.0: amdgpu: Failed to export SMU ecc table!
[ 700.236128] amdgpu 0000:09:00.0: amdgpu: GPU reset begin!
[ 704.331171] amdgpu: qcm fence wait loop timeout expired
[ 704.331194] amdgpu: The cp might be in an unrecoverable state due to an unsuccessful queues preemption
[ 704.332445] amdgpu 0000:09:00.0: amdgpu: GPU reset begin!
[ 704.332448] amdgpu 0000:09:00.0: amdgpu: Bailing on TDR for s_job:ffffffffffffffff, as another already in progress
[ 704.332456] amdgpu: Pasid 0x8000 destroy queue 0 failed, ret -62
[ 710.360924] amdgpu 0000:09:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000013 SMN_C2PMSG_82:0x00000007
[ 710.360964] amdgpu 0000:09:00.0: amdgpu: Failed to disable smu features.
[ 710.361002] amdgpu 0000:09:00.0: amdgpu: Fail to disable dpm features!
[ 710.361014] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
still need call ras_disable_all_featrures to handle
ras initilization failure case.
Function amdgpu_device_fini_hw is called before amdgpu_device_fini_sw,
so ras ta will unload before send ras disable command, ras dsiable operation
must before hw fini.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if smu support ECCTABLE, driver can message smu to get ecc_table
then query umc error info from ECCTABLE
v2:
optimize source code makes logical more reasonable
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix race condition failure during UMC UE injection.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode2 reset, the GPU is temporarily removed from the
mgpu_info list. As a result, page retirement fails because it
cannot find the GPU in the GPU list.
To fix this, create our own list of GPUs that support MCE notifier
based page retirement and use that list to check if the UMC error
occurred on a GPU that supports MCE notifier based page retirement.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Aldebaran, GPU driver will handle bad page retirement
for GPU memory even though UMC is host managed. As a result,
register a bad page retirement handler on the mce notifier
chain to retire bad pages on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clear error count when persistant harvesting is not enabled
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, umc uncorrectable error will be ignored until
the corrupted data consumed by another ras module (such as gfx, sdma).
v2: update the debug message and replace dev_warn with dev_info.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RAS poison supported flag and tell PSP RAS TA about the info.
v2: rename poison mode to poison supported, we can also disable poison
mode even we support it.
print value of poison supported if ras feature enablement fails.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All code paths under the EAGAIN path in RAS late init are unused.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update RAS infrastructure to support RAS query for MCA subblocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added trigger error support for MP0/MP1/MPIO blocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add MPIO to RAS block
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete ras_if->name in the RAS ctx structure and remove related lines.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcd ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs RAS EEPROM files are available when
the ASIC supports RAS, and when the debugfs is
enabled, an also when "ras_enable" module
parameter is set to 0. However in this case,
we get a kernel oops when accessing some of
the "ras_..." controls in debugfs. The reason
for this is that struct amdgpu_ras::adev is
unset. This commit sets it, thus enabling access
to those facilities. Note that this facilitates
EEPROM access and not necessarily RAS features or
functionality.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.
Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.
Check the check-sum of a table in EEPROM on init.
Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.
Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qualify with "ras_". Use kernel's own--don't
redefine your own.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.
This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.
Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().
When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".
Simplify the logic here and there, as well.
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.
Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap amdgpu_ras_eeprom_xfer(..., bool write),
into amdgpu_ras_eeprom_read() and
amdgpu_ras_eeprom_write(), as that makes reading
and understanding the code clearer.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of fixing the spelling in
amdgpu_ras_eeprom_process_recods(),
rename it to,
amdgpu_ras_eeprom_xfer(),
to look similar to other I2C and protocol
transfer (read/write) functions.
Also to keep the column span to within reason by
using a shorter name.
Change the "num" function parameter from "int" to
"const u32" since it is the number of items
(records) to xfer, i.e. their count, which cannot
be a negative number.
Also swap the order of parameters, keeping the
pointer to records and their number next to each
other, while the direction now becomes the last
parameter.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use SMU to update the bad pages rather than directly
accessing the EEPROM from the driver.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use adev_to_drm() to get to the drm_device pointer.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.14-2021-06-02:
amdgpu:
- GC/MM register access macro clean up for SR-IOV
- Beige Goby updates
- W=1 Fixes
- Aldebaran fixes
- Misc display fixes
- ACPI ATCS/ATIF handling rework
- SR-IOV fixes
- RAS fixes
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes for suspend/resume
- More buffer object subclassing work
- Add new INFO query for additional vbios information
- Add new placement for preemptable SG buffers
amdkfd:
- Misc fixes
radeon:
- W=1 Fixes
- Misc cleanups
UAPI:
- Add new INFO query for additional vbios information
Useful for debugging vbios related issues. Proposed umr patch:
https://patchwork.freedesktop.org/patch/433297/
- 16bpc fixed point format support
IGT test:
https://lists.freedesktop.org/archives/igt-dev/2021-May/031507.html
Proposed Vulkan patch:
a25d480207
- Add a new GEM flag which is only used internally in the kernel driver. Userspace
is not allowed to set it.
drm:
- 16bpc fixed point format fourcc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602214009.4553-1-alexander.deucher@amd.com
On Context Query2 IOCTL return the correctable and
uncorrectable errors in O(1) fashion, from cached
values, and schedule a delayed work function to
calculate and cache them for the next such IOCTL.
v2: Cancel pending delayed work at ras_fini().
v3: Remove conditionals when dealing with delayed
work manipulation as they're inherently racy.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The correctable and uncorrectable errors
are calculated at each invocation of this
function. Therefore, it is highly inefficient to
return just one of them based on a Boolean
input. If the caller wants both, twice the work
would be done. (And this work is O(n^3) on
Vega20.)
Fix this "interface" to simply return what it had
calculated--both values. Let the caller choose
what it wants to record, inspect, use.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the stuff in amdgpu_device_fini such as HW interrupts
disable and pending fences finilization must be done right away on
pci_remove while most of the stuff which relates to finilizing and
releasing driver data structures can be kept until
drm_driver.release hook is called, i.e. when the last device
reference is dropped.
v4: Change functions prefix early->hw and late->sw
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-3-andrey.grodzovsky@amd.com
Only clear RAS error counters if perestent EDC harvesting is not supported
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a couple of syntax errors and removed one excess
parameter in the function documentations which lead
to kernel docs build warning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For aldebaran, hardware will not clear error status automatically when
reading error status register, insteadly driver should set clear bit of
the error status register explicitly to clear error status.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original codes use ras status and kernl errno together in the same
function, which is a wrong code style.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS is disabled through amdgpu_ras_enable kernel parameter,
we should quit the RAS initialization eariler to avoid initialization
of some RAS data structure such as sysfs etc.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export the runtime-set "ras_hw_enabled" and
"ras_enabled" to debugfs, for debugging.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename,
ras_hw_supported --> ras_hw_enabled, and
ras_features --> ras_enabled,
to show that ras_enabled is a subset of
ras_hw_enabled, which itself is a subset
of the ASIC capability.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move ras_hw_supported into struct amdgpu_dev.
The dependency is:
struct amdgpu_ras <== struct amdgpu_dev <== ASIC,
read as "struct amdgpu_ras depends on struct
amdgpu_dev, which depends on the hardware."
This can be loosely understood as, "if RAS is
supported, which is property of the ASIC (struct
amdgpu_dev), then we can access struct
amdgpu_ras."
v2: Fix a typo: must binary AND in ternary cond
in amdgpu_ras.c
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant ras->supported, as this value
is also stored in adev->ras_features.
Use adev->ras_features, as that supercedes "ras",
since the latter is its member.
The dependency goes like this:
ras <== adev->ras_features <== hw_supported,
and is read as "ras depends on ras_features, which
depends on hw_supported." The arrows show the flow
of information, i.e. the dependency update.
"hw_supported" should also live in "adev".
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx ras now can be enabled by default in aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add hdp block ras error query and reset support in
amdgpu ras error count query and reset interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add socket/die information in RAS messages for platforms
that support query those information
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
aldebaran gfx ras is still under development
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset the RAS error count and error status registers after
reading to prevent over reporting error counts on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-By: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because "sscanf(str, "retire_page")" always return 0, if application use
the raw data for error injection, it always wrongly falls into "op ==
3". Change to use strstr instead.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add back the double-sscanf so that both decimal
and hexadecimal values could be read in, but this
time invert the scan so that hexadecimal format
with a leading 0x is tried first, and if that
fails, then try decimal format.
Also use a logical-AND instead of nesting double
if-conditional.
See commit "drm/amdgpu: Fix a bug for input with double sscanf"
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Imporve the kernel-doc for the RAS sysfs
interface. Fix the grammar, fix the context.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add bad_page_cnt_threshold to debugfs, an optional
file system used for debugging, for reporting
purposes only--it usually matches the size of
EEPROM but may be different depending on the
"bad_page_threshold" kernel module option.
The "bad_page_cnt_threshold" is a dynamically
computed value. It depends on three things: the
VRAM size; the size of the EEPROM (or the size
allocated to the RAS table therein); and the
"bad_page_threshold" module parameter. It is a
dynamically computed value, when the amdgpu module
is run, on which further parameters and logic
depend, and as such it is helpful to see the
dynamically computed value in debugfs.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix if (ret) --> if (!ret), a bug, for
"retire_page", which caused the kernel to recall
the method with *pos == end of file, and that
bounced back with error. On the first run, we
advanced *pos, but returned 0 back to fs layer,
also a bug.
Fix the logic of the check of the result of
amdgpu_reserve_page_direct()--it is 0 on success,
and non-zero on error, not the other way
around. This patch fixes this bug.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove double-sscanf to scan for %llu and 0x%llx,
as that is not going to work!
The %llu will consume the "0" in "0x" of your
input, and the hex value you think you're entering
will always be 0. That is, a valid hex value can
never be consumed.
On the other hand, just entering a hex number
without leading 0x will either be scanned as a
string and not match, for instance FAB123, or
the leading decimal portion is scanned as the
%llu, for instance 123FAB will be scanned as 123,
which is not correct.
Thus remove the first %llu scan and leave only the
%llx scan, removing the leading 0x since %llx can
scan either.
Addresses are usually always hex values, so this
suffices.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Xinhui Pan <xinhui.pan@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added support in RAS debugfs to add bad page for isolated page retirement testing
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In event of RAS UE + warm reset, error counters shall be harvested and cleared on driver load
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx ras is only available in cerntain ip generations.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub ras is only avaiable in cerntain mmhub ip
generation.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. split umc callbacks
into ras and non-ras ones so gpu driver only
initializes umc ras callbacks when it manages
umc ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. move all xgmi ras
functions to xgmi_ras_funcs so gpu driver only
initializes xgmi ras functions when it manages
xgmi ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nbio ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. split nbio callbacks
into ras and non-ras ones so gpu driver only
initializes nbio ras callbacks when it manages
nbio ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver only manages GFX/SDMA/MMHUB RAS in platforms
that gpu node is connected to cpu through XGMI, other
than that, it queries VBIOS for RAS capabilities.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu//drm/amd/amdgpu/amdgpu_ras.c:434:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:220:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:249:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/df_v3_6.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_psp.c:2973:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:75:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:112:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:58:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:93:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:125:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:52:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:71:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:140:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:164:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:186:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_atombios.c:1916:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use positive logic to check for RAS
support. Rename the function to actually indicate
what it is testing for. Essentially, make the
function a predicate with the correct name.
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As noted during the review this approach doesn't make sense at all.
We should not apply any limitation on the VRAM applications can use inside the kernel.
If an application or end user wants to reserve a certain amount of VRAM for bad pages handling we should do this in the upper layer.
This reverts commit f89b881c81.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cause:
It is necessary to send ras disable command to ras-ta during gfx
block ras later init, because the ras capability is disable read
from vbios for vega20 gaming, but the ras context is released
during ras init process, this will cause send ras disable command
to ras-to failed.
how:
Delay releasing ras context, the ras context
will be released after gfx block later init done.
Changed from V1:
move release_ras_context into ras_resume
Changed from V2:
check BIT(UMC) is more reasonable before access eeprom table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read eeprom through SMU doesn't works stable on XGMI reset during test.
skip it for now
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When connected to a host via xGMI, system fatal errors may trigger
warm reset, driver has no change to query edc status before reset.
Therefore in this case, driver should harvest previous error loging
registers during boot, instead of only resetting them.
v2:
1. IP's ras_manager object is created when its ras feature is enabled,
so change to query edc status after amdgpu_ras_late_init called
2. change to enable watchdog timer after finishing gfx edc init
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reivewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SQ's watchdog timer monitors forward progress, a mask of which waves
caused the watchdog timeout is recorded into ras status registers and
then trigger a system fatal error event.
v2:
1. change *query_timeout_status to *query_sq_timeout_status.
2. move query_sq_timeout_status into amdgpu_ras_do_recovery.
3. add module parameters to enable/disable fatal error event and modify
the watchdog timer.
v3:
1. remove unused parameters of *enable_watchdog_timer
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.
v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To ensure user has a constant of VRAM accessible in run-time, driver
reserves limit backup pages when init, and return ones when bad pages
retired, to keep no change of unused memory size.
v2: refine codes to calculate badpags threshold
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark amdgpu_ras_debugfs_create_ctrl_node() as static.
Fixes: eb14235668777b ("drm/amdgpu: do not keep debugfs dentry")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup unnecessary debugfs dentries and surrounding functions.
v3: remove return value check for debugfs_create_file()
v2: remove ttm_debugfs_entries array.
do not init variables.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
old code wrongly used the bad page status as the function return value,
which cause amdgpu_ras_badpages_read always return failed.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is still a warning when CONFIG_DEBUG_FS is disabled:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1145:13: error: 'amdgpu_ras_debugfs_create_ctrl_node' defined but not used [-Werror=unused-function]
1145 | static void amdgpu_ras_debugfs_create_ctrl_node(struct amdgpu_device *adev)
Change the code again to make the compiler actually drop
this code but not warn about it.
Fixes: ae2bf61ff3 ("drm/amdgpu: guard ras debugfs creation/removal based on CONFIG_DEBUG_FS")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1482:6: warning: no previous prototype for ‘amdgpu_ras_error_status_query’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:908:5: warning: no previous prototype for ‘amdgpu_ras_error_cure’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. The patch corrects issues for various amdgpu_*.c files
for this driver. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_reset_gpu, because bad pages may not be freed,
it has high probability to reserve bad pages failed.
Change to reserve bad pages when freeing VRAM.
v2:
1. avoid allocating the drm_mm node outside of amdgpu_vram_mgr.c
2. move bad page reserving into amdgpu_ras_add_bad_pages, if vram mgr
reserve bad page failed, it will put it into pending list, otherwise
put it into processed list;
3. remove amdgpu_ras_release_bad_pages, because retired page's info has
been moved into amdgpu_vram_mgr
v3:
1. formate code style;
2. rename amdgpu_vram_reserve_scope as amdgpu_vram_reservation;
3. rename scope_pending as reservations_pending;
4. rename scope_processed as reserved_pages;
5. change to iterate over all the pending ones and try to insert them
with drm_mm_reserve_node();
v4:
1. rename amdgpu_vram_mgr_reserve_scope as
amdgpu_vram_mgr_reserve_range;
2. remove unused include "amdgpu_ras.h";
3. rename amdgpu_vram_mgr_check_and_reserve as
amdgpu_vram_mgr_do_reserve;
4. refine amdgpu_vram_mgr_reserve_range to call
amdgpu_vram_mgr_do_reserve.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of saving bad pages in amdgpu_ras_reset_gpu, it will reduce
the unnecessary calling of amdgpu_ras_save_bad_pages.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result]
1284 | sysfs_create_group(&adev->dev->kobj, &group);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: just print an error for sysfs group creation failure
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge ras sysfs creation together by calling sysfs_create_group
once, as sysfs_update_group may not work properly as expected.
v2: improve commit message
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable UMC RAS in lieu of stability issues on certain sku
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCEA/MMHUB EA error should not result to DF freeze, this is
fixed in next generation, but for some reasons the GCEA/MMHUB
EA error will result to DF freeze in previous generation,
diver should avoid to indicate GCEA/MMHUB EA error as hw fatal
error in kernel message by read GCEA/MMHUB err status registers.
Changed from V1:
make query_ras_error_status function more general
make read mmhub er status register more friendly
Changed from V2:
move ras error status query function into do_recovery workqueue
Changed from V3:
remove useless code from V2, print GCEA error status
instance number
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ctx->features are new RAS implementation which
is only available for Vega20 and onwards, it is not
available for vega10, vega10 should follow legacy
ECC implementation.
Changed from V1:
wrap function to initialize kfd node properties
Changed from V2:
remove wrap function and SDMA SRAM ECC check
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a static inline adev_to_drm() to obtain
the DRM device pointer from an amdgpu_device pointer.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change to dynamically create and release hive info object,
which help driver support more hives in the future.
v2:
Change to save hive object pointer in adev, to avoid locking
xgmi_mutex every time when calling amdgpu_get_xgmi_hive.
v3:
1. Change type of hive object pointer in adev from void* to
amdgpu_hive_info*.
2. remove unnecessary variable initialization.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if other threads have holden the reset lock, recovery will
fail to try_lock. Therefore we introduce atomic hive->in_reset
and adev->in_gpu_reset, to avoid reentering GPU recovery.
v2:
drop "? true : false" in the definition of amdgpu_in_reset
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can avoid potential build warn/error when
CONFIG_DEBUG_FS is not set.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The whole approach wasn't thought through till the end.
We already had a reset lock like this in the past and it caused the same problems like this one.
Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.
This reverts commit df9c8d1aa2.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before ras recovery is issued, user could operate this debugfs
node to enable/disable the harvest of all RAS IPs' ras error
count registers, which will help keep hardware's registers'
status instead of cleaning up them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once ras recovery is issued by ras sync flood interrupt or
ras controller interrupt, add this guard to bypass or execute
ras error count register harvest of all IPs.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enabled GECC error injection and query support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_bad_page_threshold = 0, bad page reservation stuffs
are skipped in either UMC ECC irq or page retirement calling of
sync flood isr.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bad page information should not be exposed by sysfs when
bad page retirement is disabled, so decouple it from ras
sysfs group creating, and add one guard before creating.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add one definition for the RAS module's FS name. It's used
in both debugfs and sysfs cases.
v2: Use static variable instead of macro definition.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS flags needs to be cleaned as well when user requires
one clean eeprom.
v2: RAS flags shall be restored after eeprom reset succeeds.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GPU executes recovery and retriving bad GPU tag
from external eerpom device, the recovery will be broken
and error message is printed as well for user's awareness.
v2: Refine warning message in threshold reaching case, and
fix spelling typo.
v3: Fix explicit calling of bad gpu.
v4: Rename function names.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once the ras recovery is issued from eeprom write itself,
bad page reservation should be ignored, otherwise, recursive
calling of writting to eeprom would happen.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When retrieving bad gpu tag from eeprom, GPU init should
fail as the GPU needs to be retired for further check.
v2: Fix spelling typo, correct the condition to detect
bad gpu tag and refine error message.
v3: Refine function argument name.
v4: Fix missing check of returning value of i2c
initialization error case.
v5: Use dev_err to print PCI information in dmesg instead
of DRM_ERROR.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bad page threshold value should be valid in the range between
-1 and max records length of eeprom. It could determine when
saved bad pages exceed threshold value, and proceed corresponding
actions.
v2: When using the default typical value, it should be min
value between typical value and eeprom max records length.
v3: drop the case of setting bad_page_cnt_threshold to be
0xFFFFFFFF, as it confuses user.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
