forked from mirrors/linux
		
	 729f1f738a
			
		
	
	
		729f1f738a
		
	
	
	
	
		
			
			The tmp102 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-3-8edacce86b28@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
		
			
				
	
	
		
			312 lines
		
	
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			312 lines
		
	
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /* Texas Instruments TMP102 SMBus temperature sensor driver
 | |
|  *
 | |
|  * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/hwmon-sysfs.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/jiffies.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/of.h>
 | |
| 
 | |
| #define	DRIVER_NAME "tmp102"
 | |
| 
 | |
| #define	TMP102_TEMP_REG			0x00
 | |
| #define	TMP102_CONF_REG			0x01
 | |
| /* note: these bit definitions are byte swapped */
 | |
| #define		TMP102_CONF_SD		0x0100
 | |
| #define		TMP102_CONF_TM		0x0200
 | |
| #define		TMP102_CONF_POL		0x0400
 | |
| #define		TMP102_CONF_F0		0x0800
 | |
| #define		TMP102_CONF_F1		0x1000
 | |
| #define		TMP102_CONF_R0		0x2000
 | |
| #define		TMP102_CONF_R1		0x4000
 | |
| #define		TMP102_CONF_OS		0x8000
 | |
| #define		TMP102_CONF_EM		0x0010
 | |
| #define		TMP102_CONF_AL		0x0020
 | |
| #define		TMP102_CONF_CR0		0x0040
 | |
| #define		TMP102_CONF_CR1		0x0080
 | |
| #define	TMP102_TLOW_REG			0x02
 | |
| #define	TMP102_THIGH_REG		0x03
 | |
| 
 | |
| #define TMP102_CONFREG_MASK	(TMP102_CONF_SD | TMP102_CONF_TM | \
 | |
| 				 TMP102_CONF_POL | TMP102_CONF_F0 | \
 | |
| 				 TMP102_CONF_F1 | TMP102_CONF_OS | \
 | |
| 				 TMP102_CONF_EM | TMP102_CONF_AL | \
 | |
| 				 TMP102_CONF_CR0 | TMP102_CONF_CR1)
 | |
| 
 | |
| #define TMP102_CONFIG_CLEAR	(TMP102_CONF_SD | TMP102_CONF_OS | \
 | |
| 				 TMP102_CONF_CR0)
 | |
| #define TMP102_CONFIG_SET	(TMP102_CONF_TM | TMP102_CONF_EM | \
 | |
| 				 TMP102_CONF_CR1)
 | |
| 
 | |
| #define CONVERSION_TIME_MS		35	/* in milli-seconds */
 | |
| 
 | |
| struct tmp102 {
 | |
| 	struct regmap *regmap;
 | |
| 	u16 config_orig;
 | |
| 	unsigned long ready_time;
 | |
| };
 | |
| 
 | |
| /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
 | |
| static inline int tmp102_reg_to_mC(s16 val)
 | |
| {
 | |
| 	return ((val & ~0x01) * 1000) / 128;
 | |
| }
 | |
| 
 | |
| /* convert milliCelsius to left adjusted 13-bit TMP102 register value */
 | |
| static inline u16 tmp102_mC_to_reg(int val)
 | |
| {
 | |
| 	return (val * 128) / 1000;
 | |
| }
 | |
| 
 | |
| static int tmp102_read(struct device *dev, enum hwmon_sensor_types type,
 | |
| 		       u32 attr, int channel, long *temp)
 | |
| {
 | |
| 	struct tmp102 *tmp102 = dev_get_drvdata(dev);
 | |
| 	unsigned int regval;
 | |
| 	int err, reg;
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_input:
 | |
| 		/* Is it too early to return a conversion ? */
 | |
| 		if (time_before(jiffies, tmp102->ready_time)) {
 | |
| 			dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__);
 | |
| 			return -EAGAIN;
 | |
| 		}
 | |
| 		reg = TMP102_TEMP_REG;
 | |
| 		break;
 | |
| 	case hwmon_temp_max_hyst:
 | |
| 		reg = TMP102_TLOW_REG;
 | |
| 		break;
 | |
| 	case hwmon_temp_max:
 | |
| 		reg = TMP102_THIGH_REG;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	err = regmap_read(tmp102->regmap, reg, ®val);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 	*temp = tmp102_reg_to_mC(regval);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tmp102_write(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			u32 attr, int channel, long temp)
 | |
| {
 | |
| 	struct tmp102 *tmp102 = dev_get_drvdata(dev);
 | |
| 	int reg;
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_max_hyst:
 | |
| 		reg = TMP102_TLOW_REG;
 | |
| 		break;
 | |
| 	case hwmon_temp_max:
 | |
| 		reg = TMP102_THIGH_REG;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	temp = clamp_val(temp, -256000, 255000);
 | |
| 	return regmap_write(tmp102->regmap, reg, tmp102_mC_to_reg(temp));
 | |
| }
 | |
| 
 | |
| static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type,
 | |
| 				 u32 attr, int channel)
 | |
| {
 | |
| 	if (type != hwmon_temp)
 | |
| 		return 0;
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_input:
 | |
| 		return 0444;
 | |
| 	case hwmon_temp_max_hyst:
 | |
| 	case hwmon_temp_max:
 | |
| 		return 0644;
 | |
| 	default:
 | |
| 		return 0;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct hwmon_channel_info * const tmp102_info[] = {
 | |
| 	HWMON_CHANNEL_INFO(chip,
 | |
| 			   HWMON_C_REGISTER_TZ),
 | |
| 	HWMON_CHANNEL_INFO(temp,
 | |
| 			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct hwmon_ops tmp102_hwmon_ops = {
 | |
| 	.is_visible = tmp102_is_visible,
 | |
| 	.read = tmp102_read,
 | |
| 	.write = tmp102_write,
 | |
| };
 | |
| 
 | |
| static const struct hwmon_chip_info tmp102_chip_info = {
 | |
| 	.ops = &tmp102_hwmon_ops,
 | |
| 	.info = tmp102_info,
 | |
| };
 | |
| 
 | |
| static void tmp102_restore_config(void *data)
 | |
| {
 | |
| 	struct tmp102 *tmp102 = data;
 | |
| 
 | |
| 	regmap_write(tmp102->regmap, TMP102_CONF_REG, tmp102->config_orig);
 | |
| }
 | |
| 
 | |
| static bool tmp102_is_writeable_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	return reg != TMP102_TEMP_REG;
 | |
| }
 | |
| 
 | |
| static bool tmp102_is_volatile_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	return reg == TMP102_TEMP_REG;
 | |
| }
 | |
| 
 | |
| static const struct regmap_config tmp102_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 16,
 | |
| 	.max_register = TMP102_THIGH_REG,
 | |
| 	.writeable_reg = tmp102_is_writeable_reg,
 | |
| 	.volatile_reg = tmp102_is_volatile_reg,
 | |
| 	.val_format_endian = REGMAP_ENDIAN_BIG,
 | |
| 	.cache_type = REGCACHE_MAPLE,
 | |
| 	.use_single_read = true,
 | |
| 	.use_single_write = true,
 | |
| };
 | |
| 
 | |
| static int tmp102_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct device *hwmon_dev;
 | |
| 	struct tmp102 *tmp102;
 | |
| 	unsigned int regval;
 | |
| 	int err;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter,
 | |
| 				     I2C_FUNC_SMBUS_WORD_DATA)) {
 | |
| 		dev_err(dev,
 | |
| 			"adapter doesn't support SMBus word transactions\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	tmp102 = devm_kzalloc(dev, sizeof(*tmp102), GFP_KERNEL);
 | |
| 	if (!tmp102)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	i2c_set_clientdata(client, tmp102);
 | |
| 
 | |
| 	tmp102->regmap = devm_regmap_init_i2c(client, &tmp102_regmap_config);
 | |
| 	if (IS_ERR(tmp102->regmap))
 | |
| 		return PTR_ERR(tmp102->regmap);
 | |
| 
 | |
| 	err = regmap_read(tmp102->regmap, TMP102_CONF_REG, ®val);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(dev, "error reading config register\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	if ((regval & ~TMP102_CONFREG_MASK) !=
 | |
| 	    (TMP102_CONF_R0 | TMP102_CONF_R1)) {
 | |
| 		dev_err(dev, "unexpected config register value\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	tmp102->config_orig = regval;
 | |
| 
 | |
| 	err = devm_add_action_or_reset(dev, tmp102_restore_config, tmp102);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	regval &= ~TMP102_CONFIG_CLEAR;
 | |
| 	regval |= TMP102_CONFIG_SET;
 | |
| 
 | |
| 	err = regmap_write(tmp102->regmap, TMP102_CONF_REG, regval);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(dev, "error writing config register\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Mark that we are not ready with data until the first
 | |
| 	 * conversion is complete
 | |
| 	 */
 | |
| 	tmp102->ready_time = jiffies + msecs_to_jiffies(CONVERSION_TIME_MS);
 | |
| 
 | |
| 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
 | |
| 							 tmp102,
 | |
| 							 &tmp102_chip_info,
 | |
| 							 NULL);
 | |
| 	if (IS_ERR(hwmon_dev)) {
 | |
| 		dev_dbg(dev, "unable to register hwmon device\n");
 | |
| 		return PTR_ERR(hwmon_dev);
 | |
| 	}
 | |
| 	dev_info(dev, "initialized\n");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tmp102_suspend(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct tmp102 *tmp102 = i2c_get_clientdata(client);
 | |
| 
 | |
| 	return regmap_update_bits(tmp102->regmap, TMP102_CONF_REG,
 | |
| 				  TMP102_CONF_SD, TMP102_CONF_SD);
 | |
| }
 | |
| 
 | |
| static int tmp102_resume(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct tmp102 *tmp102 = i2c_get_clientdata(client);
 | |
| 	int err;
 | |
| 
 | |
| 	err = regmap_update_bits(tmp102->regmap, TMP102_CONF_REG,
 | |
| 				 TMP102_CONF_SD, 0);
 | |
| 
 | |
| 	tmp102->ready_time = jiffies + msecs_to_jiffies(CONVERSION_TIME_MS);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static DEFINE_SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume);
 | |
| 
 | |
| static const struct i2c_device_id tmp102_id[] = {
 | |
| 	{ "tmp102", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, tmp102_id);
 | |
| 
 | |
| static const struct of_device_id __maybe_unused tmp102_of_match[] = {
 | |
| 	{ .compatible = "ti,tmp102" },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, tmp102_of_match);
 | |
| 
 | |
| static struct i2c_driver tmp102_driver = {
 | |
| 	.driver.name	= DRIVER_NAME,
 | |
| 	.driver.of_match_table = of_match_ptr(tmp102_of_match),
 | |
| 	.driver.pm	= pm_sleep_ptr(&tmp102_dev_pm_ops),
 | |
| 	.probe		= tmp102_probe,
 | |
| 	.id_table	= tmp102_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(tmp102_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
 | |
| MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
 | |
| MODULE_LICENSE("GPL");
 |