forked from mirrors/linux
		
	The GPIO-based NAND controller on National Instruments 169445 hardware exposes a set of simple lines for the control signals. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
		
			
				
	
	
		
			712 lines
		
	
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			712 lines
		
	
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Generic driver for memory-mapped GPIO controllers.
 | 
						|
 *
 | 
						|
 * Copyright 2008 MontaVista Software, Inc.
 | 
						|
 * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute  it and/or modify it
 | 
						|
 * under  the terms of  the GNU General  Public License as published by the
 | 
						|
 * Free Software Foundation;  either version 2 of the  License, or (at your
 | 
						|
 * option) any later version.
 | 
						|
 *
 | 
						|
 * ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
 | 
						|
 * ...``                                                         ```````..
 | 
						|
 * ..The simplest form of a GPIO controller that the driver supports is``
 | 
						|
 *  `.just a single "data" register, where GPIO state can be read and/or `
 | 
						|
 *    `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
 | 
						|
 *        `````````
 | 
						|
                                    ___
 | 
						|
_/~~|___/~|   . ```~~~~~~       ___/___\___     ,~.`.`.`.`````.~~...,,,,...
 | 
						|
__________|~$@~~~        %~    /o*o*o*o*o*o\   .. Implementing such a GPIO .
 | 
						|
o        `                     ~~~~\___/~~~~    ` controller in FPGA is ,.`
 | 
						|
                                                 `....trivial..'~`.```.```
 | 
						|
 *                                                    ```````
 | 
						|
 *  .```````~~~~`..`.``.``.
 | 
						|
 * .  The driver supports  `...       ,..```.`~~~```````````````....````.``,,
 | 
						|
 * .   big-endian notation, just`.  .. A bit more sophisticated controllers ,
 | 
						|
 *  . register the device with -be`. .with a pair of set/clear-bit registers ,
 | 
						|
 *   `.. suffix.  ```~~`````....`.`   . affecting the data register and the .`
 | 
						|
 *     ``.`.``...```                  ```.. output pins are also supported.`
 | 
						|
 *                        ^^             `````.`````````.,``~``~``~~``````
 | 
						|
 *                                                   .                  ^^
 | 
						|
 *   ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
 | 
						|
 * .. The expectation is that in at least some cases .    ,-~~~-,
 | 
						|
 *  .this will be used with roll-your-own ASIC/FPGA .`     \   /
 | 
						|
 *  .logic in Verilog or VHDL. ~~~`````````..`````~~`       \ /
 | 
						|
 *  ..````````......```````````                             \o_
 | 
						|
 *                                                           |
 | 
						|
 *                              ^^                          / \
 | 
						|
 *
 | 
						|
 *           ...`````~~`.....``.`..........``````.`.``.```........``.
 | 
						|
 *            `  8, 16, 32 and 64 bits registers are supported, and``.
 | 
						|
 *            . the number of GPIOs is determined by the width of   ~
 | 
						|
 *             .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
 | 
						|
 *               `.......````.```
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/bug.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/spinlock.h>
 | 
						|
#include <linux/compiler.h>
 | 
						|
#include <linux/types.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/log2.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/gpio/driver.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/mod_devicetable.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/of_device.h>
 | 
						|
 | 
						|
static void bgpio_write8(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	writeb(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read8(void __iomem *reg)
 | 
						|
{
 | 
						|
	return readb(reg);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_write16(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	writew(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read16(void __iomem *reg)
 | 
						|
{
 | 
						|
	return readw(reg);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_write32(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	writel(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read32(void __iomem *reg)
 | 
						|
{
 | 
						|
	return readl(reg);
 | 
						|
}
 | 
						|
 | 
						|
#if BITS_PER_LONG >= 64
 | 
						|
static void bgpio_write64(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	writeq(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read64(void __iomem *reg)
 | 
						|
{
 | 
						|
	return readq(reg);
 | 
						|
}
 | 
						|
#endif /* BITS_PER_LONG >= 64 */
 | 
						|
 | 
						|
static void bgpio_write16be(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	iowrite16be(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read16be(void __iomem *reg)
 | 
						|
{
 | 
						|
	return ioread16be(reg);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_write32be(void __iomem *reg, unsigned long data)
 | 
						|
{
 | 
						|
	iowrite32be(data, reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_read32be(void __iomem *reg)
 | 
						|
{
 | 
						|
	return ioread32be(reg);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_pin2mask(struct gpio_chip *gc, unsigned int pin)
 | 
						|
{
 | 
						|
	return BIT(pin);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned long bgpio_pin2mask_be(struct gpio_chip *gc,
 | 
						|
				       unsigned int pin)
 | 
						|
{
 | 
						|
	return BIT(gc->bgpio_bits - 1 - pin);
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	unsigned long pinmask = gc->pin2mask(gc, gpio);
 | 
						|
 | 
						|
	if (gc->bgpio_dir & pinmask)
 | 
						|
		return !!(gc->read_reg(gc->reg_set) & pinmask);
 | 
						|
	else
 | 
						|
		return !!(gc->read_reg(gc->reg_dat) & pinmask);
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	return !!(gc->read_reg(gc->reg_dat) & gc->pin2mask(gc, gpio));
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val)
 | 
						|
{
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 | 
						|
{
 | 
						|
	unsigned long mask = gc->pin2mask(gc, gpio);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	if (val)
 | 
						|
		gc->bgpio_data |= mask;
 | 
						|
	else
 | 
						|
		gc->bgpio_data &= ~mask;
 | 
						|
 | 
						|
	gc->write_reg(gc->reg_dat, gc->bgpio_data);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio,
 | 
						|
				 int val)
 | 
						|
{
 | 
						|
	unsigned long mask = gc->pin2mask(gc, gpio);
 | 
						|
 | 
						|
	if (val)
 | 
						|
		gc->write_reg(gc->reg_set, mask);
 | 
						|
	else
 | 
						|
		gc->write_reg(gc->reg_clr, mask);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val)
 | 
						|
{
 | 
						|
	unsigned long mask = gc->pin2mask(gc, gpio);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	if (val)
 | 
						|
		gc->bgpio_data |= mask;
 | 
						|
	else
 | 
						|
		gc->bgpio_data &= ~mask;
 | 
						|
 | 
						|
	gc->write_reg(gc->reg_set, gc->bgpio_data);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_multiple_get_masks(struct gpio_chip *gc,
 | 
						|
				     unsigned long *mask, unsigned long *bits,
 | 
						|
				     unsigned long *set_mask,
 | 
						|
				     unsigned long *clear_mask)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	*set_mask = 0;
 | 
						|
	*clear_mask = 0;
 | 
						|
 | 
						|
	for (i = 0; i < gc->bgpio_bits; i++) {
 | 
						|
		if (*mask == 0)
 | 
						|
			break;
 | 
						|
		if (__test_and_clear_bit(i, mask)) {
 | 
						|
			if (test_bit(i, bits))
 | 
						|
				*set_mask |= gc->pin2mask(gc, i);
 | 
						|
			else
 | 
						|
				*clear_mask |= gc->pin2mask(gc, i);
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_multiple_single_reg(struct gpio_chip *gc,
 | 
						|
					  unsigned long *mask,
 | 
						|
					  unsigned long *bits,
 | 
						|
					  void __iomem *reg)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
	unsigned long set_mask, clear_mask;
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
 | 
						|
 | 
						|
	gc->bgpio_data |= set_mask;
 | 
						|
	gc->bgpio_data &= ~clear_mask;
 | 
						|
 | 
						|
	gc->write_reg(reg, gc->bgpio_data);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 | 
						|
			       unsigned long *bits)
 | 
						|
{
 | 
						|
	bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_dat);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask,
 | 
						|
				   unsigned long *bits)
 | 
						|
{
 | 
						|
	bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_set);
 | 
						|
}
 | 
						|
 | 
						|
static void bgpio_set_multiple_with_clear(struct gpio_chip *gc,
 | 
						|
					  unsigned long *mask,
 | 
						|
					  unsigned long *bits)
 | 
						|
{
 | 
						|
	unsigned long set_mask, clear_mask;
 | 
						|
 | 
						|
	bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
 | 
						|
 | 
						|
	if (set_mask)
 | 
						|
		gc->write_reg(gc->reg_set, set_mask);
 | 
						|
	if (clear_mask)
 | 
						|
		gc->write_reg(gc->reg_clr, clear_mask);
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio,
 | 
						|
				int val)
 | 
						|
{
 | 
						|
	return -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio,
 | 
						|
				int val)
 | 
						|
{
 | 
						|
	gc->set(gc, gpio, val);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	gc->bgpio_dir &= ~gc->pin2mask(gc, gpio);
 | 
						|
	gc->write_reg(gc->reg_dir, gc->bgpio_dir);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	/* Return 0 if output, 1 of input */
 | 
						|
	return !(gc->read_reg(gc->reg_dir) & gc->pin2mask(gc, gpio));
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	gc->set(gc, gpio, val);
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	gc->bgpio_dir |= gc->pin2mask(gc, gpio);
 | 
						|
	gc->write_reg(gc->reg_dir, gc->bgpio_dir);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_dir_in_inv(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	gc->bgpio_dir |= gc->pin2mask(gc, gpio);
 | 
						|
	gc->write_reg(gc->reg_dir, gc->bgpio_dir);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	gc->set(gc, gpio, val);
 | 
						|
 | 
						|
	spin_lock_irqsave(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	gc->bgpio_dir &= ~gc->pin2mask(gc, gpio);
 | 
						|
	gc->write_reg(gc->reg_dir, gc->bgpio_dir);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_get_dir_inv(struct gpio_chip *gc, unsigned int gpio)
 | 
						|
{
 | 
						|
	/* Return 0 if output, 1 if input */
 | 
						|
	return !!(gc->read_reg(gc->reg_dir) & gc->pin2mask(gc, gpio));
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_setup_accessors(struct device *dev,
 | 
						|
				 struct gpio_chip *gc,
 | 
						|
				 bool bit_be,
 | 
						|
				 bool byte_be)
 | 
						|
{
 | 
						|
 | 
						|
	switch (gc->bgpio_bits) {
 | 
						|
	case 8:
 | 
						|
		gc->read_reg	= bgpio_read8;
 | 
						|
		gc->write_reg	= bgpio_write8;
 | 
						|
		break;
 | 
						|
	case 16:
 | 
						|
		if (byte_be) {
 | 
						|
			gc->read_reg	= bgpio_read16be;
 | 
						|
			gc->write_reg	= bgpio_write16be;
 | 
						|
		} else {
 | 
						|
			gc->read_reg	= bgpio_read16;
 | 
						|
			gc->write_reg	= bgpio_write16;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 32:
 | 
						|
		if (byte_be) {
 | 
						|
			gc->read_reg	= bgpio_read32be;
 | 
						|
			gc->write_reg	= bgpio_write32be;
 | 
						|
		} else {
 | 
						|
			gc->read_reg	= bgpio_read32;
 | 
						|
			gc->write_reg	= bgpio_write32;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
#if BITS_PER_LONG >= 64
 | 
						|
	case 64:
 | 
						|
		if (byte_be) {
 | 
						|
			dev_err(dev,
 | 
						|
				"64 bit big endian byte order unsupported\n");
 | 
						|
			return -EINVAL;
 | 
						|
		} else {
 | 
						|
			gc->read_reg	= bgpio_read64;
 | 
						|
			gc->write_reg	= bgpio_write64;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
#endif /* BITS_PER_LONG >= 64 */
 | 
						|
	default:
 | 
						|
		dev_err(dev, "unsupported data width %u bits\n", gc->bgpio_bits);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	gc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Create the device and allocate the resources.  For setting GPIO's there are
 | 
						|
 * three supported configurations:
 | 
						|
 *
 | 
						|
 *	- single input/output register resource (named "dat").
 | 
						|
 *	- set/clear pair (named "set" and "clr").
 | 
						|
 *	- single output register resource and single input resource ("set" and
 | 
						|
 *	dat").
 | 
						|
 *
 | 
						|
 * For the single output register, this drives a 1 by setting a bit and a zero
 | 
						|
 * by clearing a bit.  For the set clr pair, this drives a 1 by setting a bit
 | 
						|
 * in the set register and clears it by setting a bit in the clear register.
 | 
						|
 * The configuration is detected by which resources are present.
 | 
						|
 *
 | 
						|
 * For setting the GPIO direction, there are three supported configurations:
 | 
						|
 *
 | 
						|
 *	- simple bidirection GPIO that requires no configuration.
 | 
						|
 *	- an output direction register (named "dirout") where a 1 bit
 | 
						|
 *	indicates the GPIO is an output.
 | 
						|
 *	- an input direction register (named "dirin") where a 1 bit indicates
 | 
						|
 *	the GPIO is an input.
 | 
						|
 */
 | 
						|
static int bgpio_setup_io(struct gpio_chip *gc,
 | 
						|
			  void __iomem *dat,
 | 
						|
			  void __iomem *set,
 | 
						|
			  void __iomem *clr,
 | 
						|
			  unsigned long flags)
 | 
						|
{
 | 
						|
 | 
						|
	gc->reg_dat = dat;
 | 
						|
	if (!gc->reg_dat)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (set && clr) {
 | 
						|
		gc->reg_set = set;
 | 
						|
		gc->reg_clr = clr;
 | 
						|
		gc->set = bgpio_set_with_clear;
 | 
						|
		gc->set_multiple = bgpio_set_multiple_with_clear;
 | 
						|
	} else if (set && !clr) {
 | 
						|
		gc->reg_set = set;
 | 
						|
		gc->set = bgpio_set_set;
 | 
						|
		gc->set_multiple = bgpio_set_multiple_set;
 | 
						|
	} else if (flags & BGPIOF_NO_OUTPUT) {
 | 
						|
		gc->set = bgpio_set_none;
 | 
						|
		gc->set_multiple = NULL;
 | 
						|
	} else {
 | 
						|
		gc->set = bgpio_set;
 | 
						|
		gc->set_multiple = bgpio_set_multiple;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
 | 
						|
	    (flags & BGPIOF_READ_OUTPUT_REG_SET))
 | 
						|
		gc->get = bgpio_get_set;
 | 
						|
	else
 | 
						|
		gc->get = bgpio_get;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_setup_direction(struct gpio_chip *gc,
 | 
						|
				 void __iomem *dirout,
 | 
						|
				 void __iomem *dirin,
 | 
						|
				 unsigned long flags)
 | 
						|
{
 | 
						|
	if (dirout && dirin) {
 | 
						|
		return -EINVAL;
 | 
						|
	} else if (dirout) {
 | 
						|
		gc->reg_dir = dirout;
 | 
						|
		gc->direction_output = bgpio_dir_out;
 | 
						|
		gc->direction_input = bgpio_dir_in;
 | 
						|
		gc->get_direction = bgpio_get_dir;
 | 
						|
	} else if (dirin) {
 | 
						|
		gc->reg_dir = dirin;
 | 
						|
		gc->direction_output = bgpio_dir_out_inv;
 | 
						|
		gc->direction_input = bgpio_dir_in_inv;
 | 
						|
		gc->get_direction = bgpio_get_dir_inv;
 | 
						|
	} else {
 | 
						|
		if (flags & BGPIOF_NO_OUTPUT)
 | 
						|
			gc->direction_output = bgpio_dir_out_err;
 | 
						|
		else
 | 
						|
			gc->direction_output = bgpio_simple_dir_out;
 | 
						|
		gc->direction_input = bgpio_simple_dir_in;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin)
 | 
						|
{
 | 
						|
	if (gpio_pin < chip->ngpio)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	return -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
int bgpio_init(struct gpio_chip *gc, struct device *dev,
 | 
						|
	       unsigned long sz, void __iomem *dat, void __iomem *set,
 | 
						|
	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
 | 
						|
	       unsigned long flags)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!is_power_of_2(sz))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	gc->bgpio_bits = sz * 8;
 | 
						|
	if (gc->bgpio_bits > BITS_PER_LONG)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_lock_init(&gc->bgpio_lock);
 | 
						|
	gc->parent = dev;
 | 
						|
	gc->label = dev_name(dev);
 | 
						|
	gc->base = -1;
 | 
						|
	gc->ngpio = gc->bgpio_bits;
 | 
						|
	gc->request = bgpio_request;
 | 
						|
 | 
						|
	ret = bgpio_setup_io(gc, dat, set, clr, flags);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = bgpio_setup_accessors(dev, gc, flags & BGPIOF_BIG_ENDIAN,
 | 
						|
				    flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = bgpio_setup_direction(gc, dirout, dirin, flags);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	gc->bgpio_data = gc->read_reg(gc->reg_dat);
 | 
						|
	if (gc->set == bgpio_set_set &&
 | 
						|
			!(flags & BGPIOF_UNREADABLE_REG_SET))
 | 
						|
		gc->bgpio_data = gc->read_reg(gc->reg_set);
 | 
						|
	if (gc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
 | 
						|
		gc->bgpio_dir = gc->read_reg(gc->reg_dir);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(bgpio_init);
 | 
						|
 | 
						|
#if IS_ENABLED(CONFIG_GPIO_GENERIC_PLATFORM)
 | 
						|
 | 
						|
static void __iomem *bgpio_map(struct platform_device *pdev,
 | 
						|
			       const char *name,
 | 
						|
			       resource_size_t sane_sz)
 | 
						|
{
 | 
						|
	struct resource *r;
 | 
						|
	resource_size_t sz;
 | 
						|
 | 
						|
	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
 | 
						|
	if (!r)
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	sz = resource_size(r);
 | 
						|
	if (sz != sane_sz)
 | 
						|
		return IOMEM_ERR_PTR(-EINVAL);
 | 
						|
 | 
						|
	return devm_ioremap_resource(&pdev->dev, r);
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_OF
 | 
						|
static const struct of_device_id bgpio_of_match[] = {
 | 
						|
	{ .compatible = "brcm,bcm6345-gpio" },
 | 
						|
	{ .compatible = "wd,mbl-gpio" },
 | 
						|
	{ .compatible = "ni,169445-nand-gpio" },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, bgpio_of_match);
 | 
						|
 | 
						|
static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
 | 
						|
					  unsigned long *flags)
 | 
						|
{
 | 
						|
	struct bgpio_pdata *pdata;
 | 
						|
 | 
						|
	if (!of_match_device(bgpio_of_match, &pdev->dev))
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	pdata = devm_kzalloc(&pdev->dev, sizeof(struct bgpio_pdata),
 | 
						|
			     GFP_KERNEL);
 | 
						|
	if (!pdata)
 | 
						|
		return ERR_PTR(-ENOMEM);
 | 
						|
 | 
						|
	pdata->base = -1;
 | 
						|
 | 
						|
	if (of_device_is_big_endian(pdev->dev.of_node))
 | 
						|
		*flags |= BGPIOF_BIG_ENDIAN_BYTE_ORDER;
 | 
						|
 | 
						|
	if (of_property_read_bool(pdev->dev.of_node, "no-output"))
 | 
						|
		*flags |= BGPIOF_NO_OUTPUT;
 | 
						|
 | 
						|
	return pdata;
 | 
						|
}
 | 
						|
#else
 | 
						|
static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
 | 
						|
					  unsigned long *flags)
 | 
						|
{
 | 
						|
	return NULL;
 | 
						|
}
 | 
						|
#endif /* CONFIG_OF */
 | 
						|
 | 
						|
static int bgpio_pdev_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct device *dev = &pdev->dev;
 | 
						|
	struct resource *r;
 | 
						|
	void __iomem *dat;
 | 
						|
	void __iomem *set;
 | 
						|
	void __iomem *clr;
 | 
						|
	void __iomem *dirout;
 | 
						|
	void __iomem *dirin;
 | 
						|
	unsigned long sz;
 | 
						|
	unsigned long flags = 0;
 | 
						|
	int err;
 | 
						|
	struct gpio_chip *gc;
 | 
						|
	struct bgpio_pdata *pdata;
 | 
						|
 | 
						|
	pdata = bgpio_parse_dt(pdev, &flags);
 | 
						|
	if (IS_ERR(pdata))
 | 
						|
		return PTR_ERR(pdata);
 | 
						|
 | 
						|
	if (!pdata) {
 | 
						|
		pdata = dev_get_platdata(dev);
 | 
						|
		flags = pdev->id_entry->driver_data;
 | 
						|
	}
 | 
						|
 | 
						|
	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
 | 
						|
	if (!r)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	sz = resource_size(r);
 | 
						|
 | 
						|
	dat = bgpio_map(pdev, "dat", sz);
 | 
						|
	if (IS_ERR(dat))
 | 
						|
		return PTR_ERR(dat);
 | 
						|
 | 
						|
	set = bgpio_map(pdev, "set", sz);
 | 
						|
	if (IS_ERR(set))
 | 
						|
		return PTR_ERR(set);
 | 
						|
 | 
						|
	clr = bgpio_map(pdev, "clr", sz);
 | 
						|
	if (IS_ERR(clr))
 | 
						|
		return PTR_ERR(clr);
 | 
						|
 | 
						|
	dirout = bgpio_map(pdev, "dirout", sz);
 | 
						|
	if (IS_ERR(dirout))
 | 
						|
		return PTR_ERR(dirout);
 | 
						|
 | 
						|
	dirin = bgpio_map(pdev, "dirin", sz);
 | 
						|
	if (IS_ERR(dirin))
 | 
						|
		return PTR_ERR(dirin);
 | 
						|
 | 
						|
	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
 | 
						|
	if (!gc)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	err = bgpio_init(gc, dev, sz, dat, set, clr, dirout, dirin, flags);
 | 
						|
	if (err)
 | 
						|
		return err;
 | 
						|
 | 
						|
	if (pdata) {
 | 
						|
		if (pdata->label)
 | 
						|
			gc->label = pdata->label;
 | 
						|
		gc->base = pdata->base;
 | 
						|
		if (pdata->ngpio > 0)
 | 
						|
			gc->ngpio = pdata->ngpio;
 | 
						|
	}
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, gc);
 | 
						|
 | 
						|
	return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
 | 
						|
}
 | 
						|
 | 
						|
static const struct platform_device_id bgpio_id_table[] = {
 | 
						|
	{
 | 
						|
		.name		= "basic-mmio-gpio",
 | 
						|
		.driver_data	= 0,
 | 
						|
	}, {
 | 
						|
		.name		= "basic-mmio-gpio-be",
 | 
						|
		.driver_data	= BGPIOF_BIG_ENDIAN,
 | 
						|
	},
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(platform, bgpio_id_table);
 | 
						|
 | 
						|
static struct platform_driver bgpio_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name = "basic-mmio-gpio",
 | 
						|
		.of_match_table = of_match_ptr(bgpio_of_match),
 | 
						|
	},
 | 
						|
	.id_table = bgpio_id_table,
 | 
						|
	.probe = bgpio_pdev_probe,
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(bgpio_driver);
 | 
						|
 | 
						|
#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
 | 
						|
 | 
						|
MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
 | 
						|
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
 | 
						|
MODULE_LICENSE("GPL");
 |