forked from mirrors/linux
		
	 d8a66f3621
			
		
	
	
		d8a66f3621
		
	
	
	
	
		
			
			These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
		
			
				
	
	
		
			265 lines
		
	
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			265 lines
		
	
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin
 | |
|  *
 | |
|  * Copyright 2015-2019 Analog Devices Inc.
 | |
|  */
 | |
| 
 | |
| #include <linux/bits.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| 
 | |
| /*  Command Byte Operations */
 | |
| #define ADM1177_CMD_V_CONT	BIT(0)
 | |
| #define ADM1177_CMD_I_CONT	BIT(2)
 | |
| #define ADM1177_CMD_VRANGE	BIT(4)
 | |
| 
 | |
| /* Extended Register */
 | |
| #define ADM1177_REG_ALERT_TH	2
 | |
| 
 | |
| #define ADM1177_BITS		12
 | |
| 
 | |
| /**
 | |
|  * struct adm1177_state - driver instance specific data
 | |
|  * @client:		pointer to i2c client
 | |
|  * @r_sense_uohm:	current sense resistor value
 | |
|  * @alert_threshold_ua:	current limit for shutdown
 | |
|  * @vrange_high:	internal voltage divider
 | |
|  */
 | |
| struct adm1177_state {
 | |
| 	struct i2c_client	*client;
 | |
| 	u32			r_sense_uohm;
 | |
| 	u32			alert_threshold_ua;
 | |
| 	bool			vrange_high;
 | |
| };
 | |
| 
 | |
| static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data)
 | |
| {
 | |
| 	return i2c_master_recv(st->client, data, num);
 | |
| }
 | |
| 
 | |
| static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd)
 | |
| {
 | |
| 	return i2c_smbus_write_byte(st->client, cmd);
 | |
| }
 | |
| 
 | |
| static int adm1177_write_alert_thr(struct adm1177_state *st,
 | |
| 				   u32 alert_threshold_ua)
 | |
| {
 | |
| 	u64 val;
 | |
| 	int ret;
 | |
| 
 | |
| 	val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm;
 | |
| 	val = div_u64(val, 105840000U);
 | |
| 	val = div_u64(val, 1000U);
 | |
| 	if (val > 0xFF)
 | |
| 		val = 0xFF;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH,
 | |
| 					val);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	st->alert_threshold_ua = alert_threshold_ua;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			u32 attr, int channel, long *val)
 | |
| {
 | |
| 	struct adm1177_state *st = dev_get_drvdata(dev);
 | |
| 	u8 data[3];
 | |
| 	long dummy;
 | |
| 	int ret;
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case hwmon_curr:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_curr_input:
 | |
| 			ret = adm1177_read_raw(st, 3, data);
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 			dummy = (data[1] << 4) | (data[2] & 0xF);
 | |
| 			/*
 | |
| 			 * convert to milliamperes
 | |
| 			 * ((105.84mV / 4096) x raw) / senseResistor(ohm)
 | |
| 			 */
 | |
| 			*val = div_u64((105840000ull * dummy),
 | |
| 				       4096 * st->r_sense_uohm);
 | |
| 			return 0;
 | |
| 		case hwmon_curr_max_alarm:
 | |
| 			*val = st->alert_threshold_ua;
 | |
| 			return 0;
 | |
| 		default:
 | |
| 			return -EOPNOTSUPP;
 | |
| 		}
 | |
| 	case hwmon_in:
 | |
| 		ret = adm1177_read_raw(st, 3, data);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		dummy = (data[0] << 4) | (data[2] >> 4);
 | |
| 		/*
 | |
| 		 * convert to millivolts based on resistor devision
 | |
| 		 * (V_fullscale / 4096) * raw
 | |
| 		 */
 | |
| 		if (st->vrange_high)
 | |
| 			dummy *= 26350;
 | |
| 		else
 | |
| 			dummy *= 6650;
 | |
| 
 | |
| 		*val = DIV_ROUND_CLOSEST(dummy, 4096);
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int adm1177_write(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			 u32 attr, int channel, long val)
 | |
| {
 | |
| 	struct adm1177_state *st = dev_get_drvdata(dev);
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case hwmon_curr:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_curr_max_alarm:
 | |
| 			adm1177_write_alert_thr(st, val);
 | |
| 			return 0;
 | |
| 		default:
 | |
| 			return -EOPNOTSUPP;
 | |
| 		}
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static umode_t adm1177_is_visible(const void *data,
 | |
| 				  enum hwmon_sensor_types type,
 | |
| 				  u32 attr, int channel)
 | |
| {
 | |
| 	const struct adm1177_state *st = data;
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case hwmon_in:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_in_input:
 | |
| 			return 0444;
 | |
| 		}
 | |
| 		break;
 | |
| 	case hwmon_curr:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_curr_input:
 | |
| 			if (st->r_sense_uohm)
 | |
| 				return 0444;
 | |
| 			return 0;
 | |
| 		case hwmon_curr_max_alarm:
 | |
| 			if (st->r_sense_uohm)
 | |
| 				return 0644;
 | |
| 			return 0;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct hwmon_channel_info * const adm1177_info[] = {
 | |
| 	HWMON_CHANNEL_INFO(curr,
 | |
| 			   HWMON_C_INPUT | HWMON_C_MAX_ALARM),
 | |
| 	HWMON_CHANNEL_INFO(in,
 | |
| 			   HWMON_I_INPUT),
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct hwmon_ops adm1177_hwmon_ops = {
 | |
| 	.is_visible = adm1177_is_visible,
 | |
| 	.read = adm1177_read,
 | |
| 	.write = adm1177_write,
 | |
| };
 | |
| 
 | |
| static const struct hwmon_chip_info adm1177_chip_info = {
 | |
| 	.ops = &adm1177_hwmon_ops,
 | |
| 	.info = adm1177_info,
 | |
| };
 | |
| 
 | |
| static int adm1177_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct device *hwmon_dev;
 | |
| 	struct adm1177_state *st;
 | |
| 	u32 alert_threshold_ua;
 | |
| 	int ret;
 | |
| 
 | |
| 	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
 | |
| 	if (!st)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	st->client = client;
 | |
| 
 | |
| 	ret = devm_regulator_get_enable_optional(&client->dev, "vref");
 | |
| 	if (ret == -EPROBE_DEFER)
 | |
| 		return -EPROBE_DEFER;
 | |
| 
 | |
| 	if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
 | |
| 				     &st->r_sense_uohm))
 | |
| 		st->r_sense_uohm = 0;
 | |
| 	if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp",
 | |
| 				     &alert_threshold_ua)) {
 | |
| 		if (st->r_sense_uohm)
 | |
| 			/*
 | |
| 			 * set maximum default value from datasheet based on
 | |
| 			 * shunt-resistor
 | |
| 			 */
 | |
| 			alert_threshold_ua = div_u64(105840000000,
 | |
| 						     st->r_sense_uohm);
 | |
| 		else
 | |
| 			alert_threshold_ua = 0;
 | |
| 	}
 | |
| 	st->vrange_high = device_property_read_bool(dev,
 | |
| 						    "adi,vrange-high-enable");
 | |
| 	if (alert_threshold_ua && st->r_sense_uohm)
 | |
| 		adm1177_write_alert_thr(st, alert_threshold_ua);
 | |
| 
 | |
| 	ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT |
 | |
| 				    ADM1177_CMD_I_CONT |
 | |
| 				    (st->vrange_high ? 0 : ADM1177_CMD_VRANGE));
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	hwmon_dev =
 | |
| 		devm_hwmon_device_register_with_info(dev, client->name, st,
 | |
| 						     &adm1177_chip_info, NULL);
 | |
| 	return PTR_ERR_OR_ZERO(hwmon_dev);
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id adm1177_id[] = {
 | |
| 	{"adm1177"},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, adm1177_id);
 | |
| 
 | |
| static const struct of_device_id adm1177_dt_ids[] = {
 | |
| 	{ .compatible = "adi,adm1177" },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
 | |
| 
 | |
| static struct i2c_driver adm1177_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "adm1177",
 | |
| 		.of_match_table = adm1177_dt_ids,
 | |
| 	},
 | |
| 	.probe = adm1177_probe,
 | |
| 	.id_table = adm1177_id,
 | |
| };
 | |
| module_i2c_driver(adm1177_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
 | |
| MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
 | |
| MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver");
 | |
| MODULE_LICENSE("GPL v2");
 |