forked from mirrors/linux
		
	 e8f3323805
			
		
	
	
		e8f3323805
		
	
	
	
	
		
			
			Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 * define wiphy guard * get TX power per link * EHT 320 MHz channel support for mesh ath11k * QCA6698AQ support ath9k * RX inactivity detection rtl8xxxu * add more USB device IDs rtw88 * add more USB device IDs * enable USB RX aggregation and USB 3 to improve performance rtw89 * PowerSave flow for Multi-Link Operation -----BEGIN PGP SIGNATURE----- iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe 8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI 9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3 bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw== =WIP7 -----END PGP SIGNATURE----- Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
		
			
				
	
	
		
			1620 lines
		
	
	
	
		
			43 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1620 lines
		
	
	
	
		
			43 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * SME code for cfg80211
 | |
|  * both driver SME event handling and the SME implementation
 | |
|  * (for nl80211's connect() and wext)
 | |
|  *
 | |
|  * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
 | |
|  * Copyright (C) 2009, 2020, 2022-2024 Intel Corporation. All rights reserved.
 | |
|  * Copyright 2017	Intel Deutschland GmbH
 | |
|  */
 | |
| 
 | |
| #include <linux/etherdevice.h>
 | |
| #include <linux/if_arp.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/workqueue.h>
 | |
| #include <linux/wireless.h>
 | |
| #include <linux/export.h>
 | |
| #include <net/iw_handler.h>
 | |
| #include <net/cfg80211.h>
 | |
| #include <net/rtnetlink.h>
 | |
| #include "nl80211.h"
 | |
| #include "reg.h"
 | |
| #include "rdev-ops.h"
 | |
| 
 | |
| /*
 | |
|  * Software SME in cfg80211, using auth/assoc/deauth calls to the
 | |
|  * driver. This is for implementing nl80211's connect/disconnect
 | |
|  * and wireless extensions (if configured.)
 | |
|  */
 | |
| 
 | |
| struct cfg80211_conn {
 | |
| 	struct cfg80211_connect_params params;
 | |
| 	/* these are sub-states of the _CONNECTING sme_state */
 | |
| 	enum {
 | |
| 		CFG80211_CONN_SCANNING,
 | |
| 		CFG80211_CONN_SCAN_AGAIN,
 | |
| 		CFG80211_CONN_AUTHENTICATE_NEXT,
 | |
| 		CFG80211_CONN_AUTHENTICATING,
 | |
| 		CFG80211_CONN_AUTH_FAILED_TIMEOUT,
 | |
| 		CFG80211_CONN_ASSOCIATE_NEXT,
 | |
| 		CFG80211_CONN_ASSOCIATING,
 | |
| 		CFG80211_CONN_ASSOC_FAILED,
 | |
| 		CFG80211_CONN_ASSOC_FAILED_TIMEOUT,
 | |
| 		CFG80211_CONN_DEAUTH,
 | |
| 		CFG80211_CONN_ABANDON,
 | |
| 		CFG80211_CONN_CONNECTED,
 | |
| 	} state;
 | |
| 	u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
 | |
| 	const u8 *ie;
 | |
| 	size_t ie_len;
 | |
| 	bool auto_auth, prev_bssid_valid;
 | |
| };
 | |
| 
 | |
| static void cfg80211_sme_free(struct wireless_dev *wdev)
 | |
| {
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	kfree(wdev->conn->ie);
 | |
| 	kfree(wdev->conn);
 | |
| 	wdev->conn = NULL;
 | |
| }
 | |
| 
 | |
| static int cfg80211_conn_scan(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_scan_request *request;
 | |
| 	int n_channels, err;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (rdev->scan_req || rdev->scan_msg)
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	if (wdev->conn->params.channel)
 | |
| 		n_channels = 1;
 | |
| 	else
 | |
| 		n_channels = ieee80211_get_num_supported_channels(wdev->wiphy);
 | |
| 
 | |
| 	request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) +
 | |
| 			  sizeof(request->channels[0]) * n_channels,
 | |
| 			  GFP_KERNEL);
 | |
| 	if (!request)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	request->n_channels = n_channels;
 | |
| 	if (wdev->conn->params.channel) {
 | |
| 		enum nl80211_band band = wdev->conn->params.channel->band;
 | |
| 		struct ieee80211_supported_band *sband =
 | |
| 			wdev->wiphy->bands[band];
 | |
| 
 | |
| 		if (!sband) {
 | |
| 			kfree(request);
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 		request->channels[0] = wdev->conn->params.channel;
 | |
| 		request->rates[band] = (1 << sband->n_bitrates) - 1;
 | |
| 	} else {
 | |
| 		int i = 0, j;
 | |
| 		enum nl80211_band band;
 | |
| 		struct ieee80211_supported_band *bands;
 | |
| 		struct ieee80211_channel *channel;
 | |
| 
 | |
| 		for (band = 0; band < NUM_NL80211_BANDS; band++) {
 | |
| 			bands = wdev->wiphy->bands[band];
 | |
| 			if (!bands)
 | |
| 				continue;
 | |
| 			for (j = 0; j < bands->n_channels; j++) {
 | |
| 				channel = &bands->channels[j];
 | |
| 				if (channel->flags & IEEE80211_CHAN_DISABLED)
 | |
| 					continue;
 | |
| 				request->channels[i++] = channel;
 | |
| 			}
 | |
| 			request->rates[band] = (1 << bands->n_bitrates) - 1;
 | |
| 		}
 | |
| 		n_channels = i;
 | |
| 	}
 | |
| 	request->n_channels = n_channels;
 | |
| 	request->ssids = (void *)request +
 | |
| 		struct_size(request, channels, n_channels);
 | |
| 	request->n_ssids = 1;
 | |
| 
 | |
| 	memcpy(request->ssids[0].ssid, wdev->conn->params.ssid,
 | |
| 		wdev->conn->params.ssid_len);
 | |
| 	request->ssids[0].ssid_len = wdev->conn->params.ssid_len;
 | |
| 
 | |
| 	eth_broadcast_addr(request->bssid);
 | |
| 
 | |
| 	request->wdev = wdev;
 | |
| 	request->wiphy = &rdev->wiphy;
 | |
| 	request->scan_start = jiffies;
 | |
| 
 | |
| 	rdev->scan_req = request;
 | |
| 
 | |
| 	err = cfg80211_scan(rdev);
 | |
| 	if (!err) {
 | |
| 		wdev->conn->state = CFG80211_CONN_SCANNING;
 | |
| 		nl80211_send_scan_start(rdev, wdev);
 | |
| 		dev_hold(wdev->netdev);
 | |
| 	} else {
 | |
| 		rdev->scan_req = NULL;
 | |
| 		kfree(request);
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int cfg80211_conn_do_work(struct wireless_dev *wdev,
 | |
| 				 enum nl80211_timeout_reason *treason)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_connect_params *params;
 | |
| 	struct cfg80211_auth_request auth_req = {};
 | |
| 	struct cfg80211_assoc_request req = {};
 | |
| 	int err;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return 0;
 | |
| 
 | |
| 	params = &wdev->conn->params;
 | |
| 
 | |
| 	switch (wdev->conn->state) {
 | |
| 	case CFG80211_CONN_SCANNING:
 | |
| 		/* didn't find it during scan ... */
 | |
| 		return -ENOENT;
 | |
| 	case CFG80211_CONN_SCAN_AGAIN:
 | |
| 		return cfg80211_conn_scan(wdev);
 | |
| 	case CFG80211_CONN_AUTHENTICATE_NEXT:
 | |
| 		if (WARN_ON(!rdev->ops->auth))
 | |
| 			return -EOPNOTSUPP;
 | |
| 		wdev->conn->state = CFG80211_CONN_AUTHENTICATING;
 | |
| 		auth_req.key = params->key;
 | |
| 		auth_req.key_len = params->key_len;
 | |
| 		auth_req.key_idx = params->key_idx;
 | |
| 		auth_req.auth_type = params->auth_type;
 | |
| 		auth_req.bss = cfg80211_get_bss(&rdev->wiphy, params->channel,
 | |
| 						params->bssid,
 | |
| 						params->ssid, params->ssid_len,
 | |
| 						IEEE80211_BSS_TYPE_ESS,
 | |
| 						IEEE80211_PRIVACY_ANY);
 | |
| 		auth_req.link_id = -1;
 | |
| 		err = cfg80211_mlme_auth(rdev, wdev->netdev, &auth_req);
 | |
| 		cfg80211_put_bss(&rdev->wiphy, auth_req.bss);
 | |
| 		return err;
 | |
| 	case CFG80211_CONN_AUTH_FAILED_TIMEOUT:
 | |
| 		*treason = NL80211_TIMEOUT_AUTH;
 | |
| 		return -ENOTCONN;
 | |
| 	case CFG80211_CONN_ASSOCIATE_NEXT:
 | |
| 		if (WARN_ON(!rdev->ops->assoc))
 | |
| 			return -EOPNOTSUPP;
 | |
| 		wdev->conn->state = CFG80211_CONN_ASSOCIATING;
 | |
| 		if (wdev->conn->prev_bssid_valid)
 | |
| 			req.prev_bssid = wdev->conn->prev_bssid;
 | |
| 		req.ie = params->ie;
 | |
| 		req.ie_len = params->ie_len;
 | |
| 		req.use_mfp = params->mfp != NL80211_MFP_NO;
 | |
| 		req.crypto = params->crypto;
 | |
| 		req.flags = params->flags;
 | |
| 		req.ht_capa = params->ht_capa;
 | |
| 		req.ht_capa_mask = params->ht_capa_mask;
 | |
| 		req.vht_capa = params->vht_capa;
 | |
| 		req.vht_capa_mask = params->vht_capa_mask;
 | |
| 		req.link_id = -1;
 | |
| 
 | |
| 		req.bss = cfg80211_get_bss(&rdev->wiphy, params->channel,
 | |
| 					   params->bssid,
 | |
| 					   params->ssid, params->ssid_len,
 | |
| 					   IEEE80211_BSS_TYPE_ESS,
 | |
| 					   IEEE80211_PRIVACY_ANY);
 | |
| 		if (!req.bss) {
 | |
| 			err = -ENOENT;
 | |
| 		} else {
 | |
| 			err = cfg80211_mlme_assoc(rdev, wdev->netdev,
 | |
| 						  &req, NULL);
 | |
| 			cfg80211_put_bss(&rdev->wiphy, req.bss);
 | |
| 		}
 | |
| 
 | |
| 		if (err)
 | |
| 			cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
 | |
| 					     NULL, 0,
 | |
| 					     WLAN_REASON_DEAUTH_LEAVING,
 | |
| 					     false);
 | |
| 		return err;
 | |
| 	case CFG80211_CONN_ASSOC_FAILED_TIMEOUT:
 | |
| 		*treason = NL80211_TIMEOUT_ASSOC;
 | |
| 		fallthrough;
 | |
| 	case CFG80211_CONN_ASSOC_FAILED:
 | |
| 		cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
 | |
| 				     NULL, 0,
 | |
| 				     WLAN_REASON_DEAUTH_LEAVING, false);
 | |
| 		return -ENOTCONN;
 | |
| 	case CFG80211_CONN_DEAUTH:
 | |
| 		cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
 | |
| 				     NULL, 0,
 | |
| 				     WLAN_REASON_DEAUTH_LEAVING, false);
 | |
| 		fallthrough;
 | |
| 	case CFG80211_CONN_ABANDON:
 | |
| 		/* free directly, disconnected event already sent */
 | |
| 		cfg80211_sme_free(wdev);
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		return 0;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void cfg80211_conn_work(struct work_struct *work)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev =
 | |
| 		container_of(work, struct cfg80211_registered_device, conn_work);
 | |
| 	struct wireless_dev *wdev;
 | |
| 	u8 bssid_buf[ETH_ALEN], *bssid = NULL;
 | |
| 	enum nl80211_timeout_reason treason;
 | |
| 
 | |
| 	guard(wiphy)(&rdev->wiphy);
 | |
| 
 | |
| 	list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
 | |
| 		if (!wdev->netdev)
 | |
| 			continue;
 | |
| 
 | |
| 		if (!netif_running(wdev->netdev))
 | |
| 			continue;
 | |
| 
 | |
| 		if (!wdev->conn ||
 | |
| 		    wdev->conn->state == CFG80211_CONN_CONNECTED)
 | |
| 			continue;
 | |
| 
 | |
| 		if (wdev->conn->params.bssid) {
 | |
| 			memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
 | |
| 			bssid = bssid_buf;
 | |
| 		}
 | |
| 		treason = NL80211_TIMEOUT_UNSPECIFIED;
 | |
| 		if (cfg80211_conn_do_work(wdev, &treason)) {
 | |
| 			struct cfg80211_connect_resp_params cr;
 | |
| 
 | |
| 			memset(&cr, 0, sizeof(cr));
 | |
| 			cr.status = -1;
 | |
| 			cr.links[0].bssid = bssid;
 | |
| 			cr.timeout_reason = treason;
 | |
| 			__cfg80211_connect_result(wdev->netdev, &cr, false);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void cfg80211_step_auth_next(struct cfg80211_conn *conn,
 | |
| 				    struct cfg80211_bss *bss)
 | |
| {
 | |
| 	memcpy(conn->bssid, bss->bssid, ETH_ALEN);
 | |
| 	conn->params.bssid = conn->bssid;
 | |
| 	conn->params.channel = bss->channel;
 | |
| 	conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
 | |
| }
 | |
| 
 | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */
 | |
| static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_bss *bss;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel,
 | |
| 			       wdev->conn->params.bssid,
 | |
| 			       wdev->conn->params.ssid,
 | |
| 			       wdev->conn->params.ssid_len,
 | |
| 			       wdev->conn_bss_type,
 | |
| 			       IEEE80211_PRIVACY(wdev->conn->params.privacy));
 | |
| 	if (!bss)
 | |
| 		return NULL;
 | |
| 
 | |
| 	cfg80211_step_auth_next(wdev->conn, bss);
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| 
 | |
| 	return bss;
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_scan_done(struct net_device *dev)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_bss *bss;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	if (wdev->conn->state != CFG80211_CONN_SCANNING &&
 | |
| 	    wdev->conn->state != CFG80211_CONN_SCAN_AGAIN)
 | |
| 		return;
 | |
| 
 | |
| 	bss = cfg80211_get_conn_bss(wdev);
 | |
| 	if (bss)
 | |
| 		cfg80211_put_bss(&rdev->wiphy, bss);
 | |
| 	else
 | |
| 		schedule_work(&rdev->conn_work);
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len)
 | |
| {
 | |
| 	struct wiphy *wiphy = wdev->wiphy;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 | |
| 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
 | |
| 	u16 status_code = le16_to_cpu(mgmt->u.auth.status_code);
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED)
 | |
| 		return;
 | |
| 
 | |
| 	if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
 | |
| 	    wdev->conn->auto_auth &&
 | |
| 	    wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) {
 | |
| 		/* select automatically between only open, shared, leap */
 | |
| 		switch (wdev->conn->params.auth_type) {
 | |
| 		case NL80211_AUTHTYPE_OPEN_SYSTEM:
 | |
| 			if (wdev->connect_keys)
 | |
| 				wdev->conn->params.auth_type =
 | |
| 					NL80211_AUTHTYPE_SHARED_KEY;
 | |
| 			else
 | |
| 				wdev->conn->params.auth_type =
 | |
| 					NL80211_AUTHTYPE_NETWORK_EAP;
 | |
| 			break;
 | |
| 		case NL80211_AUTHTYPE_SHARED_KEY:
 | |
| 			wdev->conn->params.auth_type =
 | |
| 				NL80211_AUTHTYPE_NETWORK_EAP;
 | |
| 			break;
 | |
| 		default:
 | |
| 			/* huh? */
 | |
| 			wdev->conn->params.auth_type =
 | |
| 				NL80211_AUTHTYPE_OPEN_SYSTEM;
 | |
| 			break;
 | |
| 		}
 | |
| 		wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
 | |
| 		schedule_work(&rdev->conn_work);
 | |
| 	} else if (status_code != WLAN_STATUS_SUCCESS) {
 | |
| 		struct cfg80211_connect_resp_params cr;
 | |
| 
 | |
| 		memset(&cr, 0, sizeof(cr));
 | |
| 		cr.status = status_code;
 | |
| 		cr.links[0].bssid = mgmt->bssid;
 | |
| 		cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED;
 | |
| 		__cfg80211_connect_result(wdev->netdev, &cr, false);
 | |
| 	} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
 | |
| 		wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
 | |
| 		schedule_work(&rdev->conn_work);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return false;
 | |
| 
 | |
| 	if (status == WLAN_STATUS_SUCCESS) {
 | |
| 		wdev->conn->state = CFG80211_CONN_CONNECTED;
 | |
| 		return false;
 | |
| 	}
 | |
| 
 | |
| 	if (wdev->conn->prev_bssid_valid) {
 | |
| 		/*
 | |
| 		 * Some stupid APs don't accept reassoc, so we
 | |
| 		 * need to fall back to trying regular assoc;
 | |
| 		 * return true so no event is sent to userspace.
 | |
| 		 */
 | |
| 		wdev->conn->prev_bssid_valid = false;
 | |
| 		wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
 | |
| 		schedule_work(&rdev->conn_work);
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	wdev->conn->state = CFG80211_CONN_ASSOC_FAILED;
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_deauth(struct wireless_dev *wdev)
 | |
| {
 | |
| 	cfg80211_sme_free(wdev);
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_auth_timeout(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	wdev->conn->state = CFG80211_CONN_AUTH_FAILED_TIMEOUT;
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_disassoc(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	wdev->conn->state = CFG80211_CONN_DEAUTH;
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	wdev->conn->state = CFG80211_CONN_ASSOC_FAILED_TIMEOUT;
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| }
 | |
| 
 | |
| void cfg80211_sme_abandon_assoc(struct wireless_dev *wdev)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return;
 | |
| 
 | |
| 	wdev->conn->state = CFG80211_CONN_ABANDON;
 | |
| 	schedule_work(&rdev->conn_work);
 | |
| }
 | |
| 
 | |
| static void cfg80211_wdev_release_bsses(struct wireless_dev *wdev)
 | |
| {
 | |
| 	unsigned int link;
 | |
| 
 | |
| 	for_each_valid_link(wdev, link) {
 | |
| 		if (!wdev->links[link].client.current_bss)
 | |
| 			continue;
 | |
| 		cfg80211_unhold_bss(wdev->links[link].client.current_bss);
 | |
| 		cfg80211_put_bss(wdev->wiphy,
 | |
| 				 &wdev->links[link].client.current_bss->pub);
 | |
| 		wdev->links[link].client.current_bss = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void cfg80211_wdev_release_link_bsses(struct wireless_dev *wdev, u16 link_mask)
 | |
| {
 | |
| 	unsigned int link;
 | |
| 
 | |
| 	for_each_valid_link(wdev, link) {
 | |
| 		if (!wdev->links[link].client.current_bss ||
 | |
| 		    !(link_mask & BIT(link)))
 | |
| 			continue;
 | |
| 		cfg80211_unhold_bss(wdev->links[link].client.current_bss);
 | |
| 		cfg80211_put_bss(wdev->wiphy,
 | |
| 				 &wdev->links[link].client.current_bss->pub);
 | |
| 		wdev->links[link].client.current_bss = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int cfg80211_sme_get_conn_ies(struct wireless_dev *wdev,
 | |
| 				     const u8 *ies, size_t ies_len,
 | |
| 				     const u8 **out_ies, size_t *out_ies_len)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	u8 *buf;
 | |
| 	size_t offs;
 | |
| 
 | |
| 	if (!rdev->wiphy.extended_capabilities_len ||
 | |
| 	    (ies && cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, ies, ies_len))) {
 | |
| 		*out_ies = kmemdup(ies, ies_len, GFP_KERNEL);
 | |
| 		if (!*out_ies)
 | |
| 			return -ENOMEM;
 | |
| 		*out_ies_len = ies_len;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	buf = kmalloc(ies_len + rdev->wiphy.extended_capabilities_len + 2,
 | |
| 		      GFP_KERNEL);
 | |
| 	if (!buf)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	if (ies_len) {
 | |
| 		static const u8 before_extcapa[] = {
 | |
| 			/* not listing IEs expected to be created by driver */
 | |
| 			WLAN_EID_RSN,
 | |
| 			WLAN_EID_QOS_CAPA,
 | |
| 			WLAN_EID_RRM_ENABLED_CAPABILITIES,
 | |
| 			WLAN_EID_MOBILITY_DOMAIN,
 | |
| 			WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
 | |
| 			WLAN_EID_BSS_COEX_2040,
 | |
| 		};
 | |
| 
 | |
| 		offs = ieee80211_ie_split(ies, ies_len, before_extcapa,
 | |
| 					  ARRAY_SIZE(before_extcapa), 0);
 | |
| 		memcpy(buf, ies, offs);
 | |
| 		/* leave a whole for extended capabilities IE */
 | |
| 		memcpy(buf + offs + rdev->wiphy.extended_capabilities_len + 2,
 | |
| 		       ies + offs, ies_len - offs);
 | |
| 	} else {
 | |
| 		offs = 0;
 | |
| 	}
 | |
| 
 | |
| 	/* place extended capabilities IE (with only driver capabilities) */
 | |
| 	buf[offs] = WLAN_EID_EXT_CAPABILITY;
 | |
| 	buf[offs + 1] = rdev->wiphy.extended_capabilities_len;
 | |
| 	memcpy(buf + offs + 2,
 | |
| 	       rdev->wiphy.extended_capabilities,
 | |
| 	       rdev->wiphy.extended_capabilities_len);
 | |
| 
 | |
| 	*out_ies = buf;
 | |
| 	*out_ies_len = ies_len + rdev->wiphy.extended_capabilities_len + 2;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int cfg80211_sme_connect(struct wireless_dev *wdev,
 | |
| 				struct cfg80211_connect_params *connect,
 | |
| 				const u8 *prev_bssid)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_bss *bss;
 | |
| 	int err;
 | |
| 
 | |
| 	if (!rdev->ops->auth || !rdev->ops->assoc)
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	cfg80211_wdev_release_bsses(wdev);
 | |
| 
 | |
| 	if (wdev->connected) {
 | |
| 		cfg80211_sme_free(wdev);
 | |
| 		wdev->connected = false;
 | |
| 	}
 | |
| 
 | |
| 	if (wdev->conn)
 | |
| 		return -EINPROGRESS;
 | |
| 
 | |
| 	wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL);
 | |
| 	if (!wdev->conn)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	/*
 | |
| 	 * Copy all parameters, and treat explicitly IEs, BSSID, SSID.
 | |
| 	 */
 | |
| 	memcpy(&wdev->conn->params, connect, sizeof(*connect));
 | |
| 	if (connect->bssid) {
 | |
| 		wdev->conn->params.bssid = wdev->conn->bssid;
 | |
| 		memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN);
 | |
| 	}
 | |
| 
 | |
| 	if (cfg80211_sme_get_conn_ies(wdev, connect->ie, connect->ie_len,
 | |
| 				      &wdev->conn->ie,
 | |
| 				      &wdev->conn->params.ie_len)) {
 | |
| 		kfree(wdev->conn);
 | |
| 		wdev->conn = NULL;
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 	wdev->conn->params.ie = wdev->conn->ie;
 | |
| 
 | |
| 	if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) {
 | |
| 		wdev->conn->auto_auth = true;
 | |
| 		/* start with open system ... should mostly work */
 | |
| 		wdev->conn->params.auth_type =
 | |
| 			NL80211_AUTHTYPE_OPEN_SYSTEM;
 | |
| 	} else {
 | |
| 		wdev->conn->auto_auth = false;
 | |
| 	}
 | |
| 
 | |
| 	wdev->conn->params.ssid = wdev->u.client.ssid;
 | |
| 	wdev->conn->params.ssid_len = wdev->u.client.ssid_len;
 | |
| 
 | |
| 	/* see if we have the bss already */
 | |
| 	bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel,
 | |
| 			       wdev->conn->params.bssid,
 | |
| 			       wdev->conn->params.ssid,
 | |
| 			       wdev->conn->params.ssid_len,
 | |
| 			       wdev->conn_bss_type,
 | |
| 			       IEEE80211_PRIVACY(wdev->conn->params.privacy));
 | |
| 
 | |
| 	if (prev_bssid) {
 | |
| 		memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN);
 | |
| 		wdev->conn->prev_bssid_valid = true;
 | |
| 	}
 | |
| 
 | |
| 	/* we're good if we have a matching bss struct */
 | |
| 	if (bss) {
 | |
| 		enum nl80211_timeout_reason treason;
 | |
| 
 | |
| 		cfg80211_step_auth_next(wdev->conn, bss);
 | |
| 		err = cfg80211_conn_do_work(wdev, &treason);
 | |
| 		cfg80211_put_bss(wdev->wiphy, bss);
 | |
| 	} else {
 | |
| 		/* otherwise we'll need to scan for the AP first */
 | |
| 		err = cfg80211_conn_scan(wdev);
 | |
| 
 | |
| 		/*
 | |
| 		 * If we can't scan right now, then we need to scan again
 | |
| 		 * after the current scan finished, since the parameters
 | |
| 		 * changed (unless we find a good AP anyway).
 | |
| 		 */
 | |
| 		if (err == -EBUSY) {
 | |
| 			err = 0;
 | |
| 			wdev->conn->state = CFG80211_CONN_SCAN_AGAIN;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (err)
 | |
| 		cfg80211_sme_free(wdev);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	int err;
 | |
| 
 | |
| 	if (!wdev->conn)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (!rdev->ops->deauth)
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	if (wdev->conn->state == CFG80211_CONN_SCANNING ||
 | |
| 	    wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) {
 | |
| 		err = 0;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* wdev->conn->params.bssid must be set if > SCANNING */
 | |
| 	err = cfg80211_mlme_deauth(rdev, wdev->netdev,
 | |
| 				   wdev->conn->params.bssid,
 | |
| 				   NULL, 0, reason, false);
 | |
|  out:
 | |
| 	cfg80211_sme_free(wdev);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * code shared for in-device and software SME
 | |
|  */
 | |
| 
 | |
| static bool cfg80211_is_all_idle(void)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev;
 | |
| 	struct wireless_dev *wdev;
 | |
| 	bool is_all_idle = true;
 | |
| 
 | |
| 	/*
 | |
| 	 * All devices must be idle as otherwise if you are actively
 | |
| 	 * scanning some new beacon hints could be learned and would
 | |
| 	 * count as new regulatory hints.
 | |
| 	 * Also if there is any other active beaconing interface we
 | |
| 	 * need not issue a disconnect hint and reset any info such
 | |
| 	 * as chan dfs state, etc.
 | |
| 	 */
 | |
| 	for_each_rdev(rdev) {
 | |
| 		guard(wiphy)(&rdev->wiphy);
 | |
| 
 | |
| 		list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
 | |
| 			if (wdev->conn || wdev->connected ||
 | |
| 			    cfg80211_beaconing_iface_active(wdev))
 | |
| 				is_all_idle = false;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return is_all_idle;
 | |
| }
 | |
| 
 | |
| static void disconnect_work(struct work_struct *work)
 | |
| {
 | |
| 	rtnl_lock();
 | |
| 	if (cfg80211_is_all_idle())
 | |
| 		regulatory_hint_disconnect();
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
 | |
| 
 | |
| static void
 | |
| cfg80211_connect_result_release_bsses(struct wireless_dev *wdev,
 | |
| 				      struct cfg80211_connect_resp_params *cr)
 | |
| {
 | |
| 	unsigned int link;
 | |
| 
 | |
| 	for_each_valid_link(cr, link) {
 | |
| 		if (!cr->links[link].bss)
 | |
| 			continue;
 | |
| 		cfg80211_unhold_bss(bss_from_pub(cr->links[link].bss));
 | |
| 		cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * API calls for drivers implementing connect/disconnect and
 | |
|  * SME event handling
 | |
|  */
 | |
| 
 | |
| /* This method must consume bss one way or another */
 | |
| void __cfg80211_connect_result(struct net_device *dev,
 | |
| 			       struct cfg80211_connect_resp_params *cr,
 | |
| 			       bool wextev)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	const struct element *country_elem = NULL;
 | |
| 	const struct element *ssid;
 | |
| 	const u8 *country_data;
 | |
| 	u8 country_datalen;
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	union iwreq_data wrqu;
 | |
| #endif
 | |
| 	unsigned int link;
 | |
| 	const u8 *connected_addr;
 | |
| 	bool bss_not_found = false;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
 | |
| 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
 | |
| 		goto out;
 | |
| 
 | |
| 	if (cr->valid_links) {
 | |
| 		if (WARN_ON(!cr->ap_mld_addr))
 | |
| 			goto out;
 | |
| 
 | |
| 		for_each_valid_link(cr, link) {
 | |
| 			if (WARN_ON(!cr->links[link].addr))
 | |
| 				goto out;
 | |
| 		}
 | |
| 
 | |
| 		if (WARN_ON(wdev->connect_keys))
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	wdev->unprot_beacon_reported = 0;
 | |
| 	nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, cr,
 | |
| 				    GFP_KERNEL);
 | |
| 	connected_addr = cr->valid_links ? cr->ap_mld_addr : cr->links[0].bssid;
 | |
| 
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	if (wextev && !cr->valid_links) {
 | |
| 		if (cr->req_ie && cr->status == WLAN_STATUS_SUCCESS) {
 | |
| 			memset(&wrqu, 0, sizeof(wrqu));
 | |
| 			wrqu.data.length = cr->req_ie_len;
 | |
| 			wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
 | |
| 					    cr->req_ie);
 | |
| 		}
 | |
| 
 | |
| 		if (cr->resp_ie && cr->status == WLAN_STATUS_SUCCESS) {
 | |
| 			memset(&wrqu, 0, sizeof(wrqu));
 | |
| 			wrqu.data.length = cr->resp_ie_len;
 | |
| 			wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
 | |
| 					    cr->resp_ie);
 | |
| 		}
 | |
| 
 | |
| 		memset(&wrqu, 0, sizeof(wrqu));
 | |
| 		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 | |
| 		if (connected_addr && cr->status == WLAN_STATUS_SUCCESS) {
 | |
| 			memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN);
 | |
| 			memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN);
 | |
| 			wdev->wext.prev_bssid_valid = true;
 | |
| 		}
 | |
| 		wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	if (cr->status == WLAN_STATUS_SUCCESS) {
 | |
| 		if (!wiphy_to_rdev(wdev->wiphy)->ops->connect) {
 | |
| 			for_each_valid_link(cr, link) {
 | |
| 				if (WARN_ON_ONCE(!cr->links[link].bss))
 | |
| 					break;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		for_each_valid_link(cr, link) {
 | |
| 			/* don't do extra lookups for failures */
 | |
| 			if (cr->links[link].status != WLAN_STATUS_SUCCESS)
 | |
| 				continue;
 | |
| 
 | |
| 			if (cr->links[link].bss)
 | |
| 				continue;
 | |
| 
 | |
| 			cr->links[link].bss =
 | |
| 				cfg80211_get_bss(wdev->wiphy, NULL,
 | |
| 						 cr->links[link].bssid,
 | |
| 						 wdev->u.client.ssid,
 | |
| 						 wdev->u.client.ssid_len,
 | |
| 						 wdev->conn_bss_type,
 | |
| 						 IEEE80211_PRIVACY_ANY);
 | |
| 			if (!cr->links[link].bss) {
 | |
| 				bss_not_found = true;
 | |
| 				break;
 | |
| 			}
 | |
| 			cfg80211_hold_bss(bss_from_pub(cr->links[link].bss));
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	cfg80211_wdev_release_bsses(wdev);
 | |
| 
 | |
| 	if (cr->status != WLAN_STATUS_SUCCESS) {
 | |
| 		kfree_sensitive(wdev->connect_keys);
 | |
| 		wdev->connect_keys = NULL;
 | |
| 		wdev->u.client.ssid_len = 0;
 | |
| 		wdev->conn_owner_nlportid = 0;
 | |
| 		cfg80211_connect_result_release_bsses(wdev, cr);
 | |
| 		cfg80211_sme_free(wdev);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (WARN_ON(bss_not_found)) {
 | |
| 		cfg80211_connect_result_release_bsses(wdev, cr);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	memset(wdev->links, 0, sizeof(wdev->links));
 | |
| 	for_each_valid_link(cr, link) {
 | |
| 		if (cr->links[link].status == WLAN_STATUS_SUCCESS)
 | |
| 			continue;
 | |
| 		cr->valid_links &= ~BIT(link);
 | |
| 		/* don't require bss pointer for failed links */
 | |
| 		if (!cr->links[link].bss)
 | |
| 			continue;
 | |
| 		cfg80211_unhold_bss(bss_from_pub(cr->links[link].bss));
 | |
| 		cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
 | |
| 	}
 | |
| 	wdev->valid_links = cr->valid_links;
 | |
| 	for_each_valid_link(cr, link)
 | |
| 		wdev->links[link].client.current_bss =
 | |
| 			bss_from_pub(cr->links[link].bss);
 | |
| 	wdev->connected = true;
 | |
| 	ether_addr_copy(wdev->u.client.connected_addr, connected_addr);
 | |
| 	if (cr->valid_links) {
 | |
| 		for_each_valid_link(cr, link)
 | |
| 			memcpy(wdev->links[link].addr, cr->links[link].addr,
 | |
| 			       ETH_ALEN);
 | |
| 	}
 | |
| 
 | |
| 	cfg80211_upload_connect_keys(wdev);
 | |
| 
 | |
| 	rcu_read_lock();
 | |
| 	for_each_valid_link(cr, link) {
 | |
| 		country_elem =
 | |
| 			ieee80211_bss_get_elem(cr->links[link].bss,
 | |
| 					       WLAN_EID_COUNTRY);
 | |
| 		if (country_elem)
 | |
| 			break;
 | |
| 	}
 | |
| 	if (!country_elem) {
 | |
| 		rcu_read_unlock();
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	country_datalen = country_elem->datalen;
 | |
| 	country_data = kmemdup(country_elem->data, country_datalen, GFP_ATOMIC);
 | |
| 	rcu_read_unlock();
 | |
| 
 | |
| 	if (!country_data)
 | |
| 		return;
 | |
| 
 | |
| 	regulatory_hint_country_ie(wdev->wiphy,
 | |
| 				   cr->links[link].bss->channel->band,
 | |
| 				   country_data, country_datalen);
 | |
| 	kfree(country_data);
 | |
| 
 | |
| 	if (!wdev->u.client.ssid_len) {
 | |
| 		rcu_read_lock();
 | |
| 		for_each_valid_link(cr, link) {
 | |
| 			ssid = ieee80211_bss_get_elem(cr->links[link].bss,
 | |
| 						      WLAN_EID_SSID);
 | |
| 
 | |
| 			if (!ssid || !ssid->datalen)
 | |
| 				continue;
 | |
| 
 | |
| 			memcpy(wdev->u.client.ssid, ssid->data, ssid->datalen);
 | |
| 			wdev->u.client.ssid_len = ssid->datalen;
 | |
| 			break;
 | |
| 		}
 | |
| 		rcu_read_unlock();
 | |
| 	}
 | |
| 
 | |
| 	return;
 | |
| out:
 | |
| 	for_each_valid_link(cr, link)
 | |
| 		cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
 | |
| }
 | |
| 
 | |
| static void cfg80211_update_link_bss(struct wireless_dev *wdev,
 | |
| 				     struct cfg80211_bss **bss)
 | |
| {
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_internal_bss *ibss;
 | |
| 
 | |
| 	if (!*bss)
 | |
| 		return;
 | |
| 
 | |
| 	ibss = bss_from_pub(*bss);
 | |
| 	if (list_empty(&ibss->list)) {
 | |
| 		struct cfg80211_bss *found = NULL, *tmp = *bss;
 | |
| 
 | |
| 		found = cfg80211_get_bss(wdev->wiphy, NULL,
 | |
| 					 (*bss)->bssid,
 | |
| 					 wdev->u.client.ssid,
 | |
| 					 wdev->u.client.ssid_len,
 | |
| 					 wdev->conn_bss_type,
 | |
| 					 IEEE80211_PRIVACY_ANY);
 | |
| 		if (found) {
 | |
| 			/* The same BSS is already updated so use it
 | |
| 			 * instead, as it has latest info.
 | |
| 			 */
 | |
| 			*bss = found;
 | |
| 		} else {
 | |
| 			/* Update with BSS provided by driver, it will
 | |
| 			 * be freshly added and ref cnted, we can free
 | |
| 			 * the old one.
 | |
| 			 *
 | |
| 			 * signal_valid can be false, as we are not
 | |
| 			 * expecting the BSS to be found.
 | |
| 			 *
 | |
| 			 * keep the old timestamp to avoid confusion
 | |
| 			 */
 | |
| 			cfg80211_bss_update(rdev, ibss, false,
 | |
| 					    ibss->ts);
 | |
| 		}
 | |
| 
 | |
| 		cfg80211_put_bss(wdev->wiphy, tmp);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Consumes bss object(s) one way or another */
 | |
| void cfg80211_connect_done(struct net_device *dev,
 | |
| 			   struct cfg80211_connect_resp_params *params,
 | |
| 			   gfp_t gfp)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_event *ev;
 | |
| 	unsigned long flags;
 | |
| 	u8 *next;
 | |
| 	size_t link_info_size = 0;
 | |
| 	unsigned int link;
 | |
| 
 | |
| 	for_each_valid_link(params, link) {
 | |
| 		cfg80211_update_link_bss(wdev, ¶ms->links[link].bss);
 | |
| 		link_info_size += params->links[link].bssid ? ETH_ALEN : 0;
 | |
| 		link_info_size += params->links[link].addr ? ETH_ALEN : 0;
 | |
| 	}
 | |
| 
 | |
| 	ev = kzalloc(sizeof(*ev) + (params->ap_mld_addr ? ETH_ALEN : 0) +
 | |
| 		     params->req_ie_len + params->resp_ie_len +
 | |
| 		     params->fils.kek_len + params->fils.pmk_len +
 | |
| 		     (params->fils.pmkid ? WLAN_PMKID_LEN : 0) + link_info_size,
 | |
| 		     gfp);
 | |
| 
 | |
| 	if (!ev) {
 | |
| 		for_each_valid_link(params, link)
 | |
| 			cfg80211_put_bss(wdev->wiphy,
 | |
| 					 params->links[link].bss);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	ev->type = EVENT_CONNECT_RESULT;
 | |
| 	next = ((u8 *)ev) + sizeof(*ev);
 | |
| 	if (params->ap_mld_addr) {
 | |
| 		ev->cr.ap_mld_addr = next;
 | |
| 		memcpy((void *)ev->cr.ap_mld_addr, params->ap_mld_addr,
 | |
| 		       ETH_ALEN);
 | |
| 		next += ETH_ALEN;
 | |
| 	}
 | |
| 	if (params->req_ie_len) {
 | |
| 		ev->cr.req_ie = next;
 | |
| 		ev->cr.req_ie_len = params->req_ie_len;
 | |
| 		memcpy((void *)ev->cr.req_ie, params->req_ie,
 | |
| 		       params->req_ie_len);
 | |
| 		next += params->req_ie_len;
 | |
| 	}
 | |
| 	if (params->resp_ie_len) {
 | |
| 		ev->cr.resp_ie = next;
 | |
| 		ev->cr.resp_ie_len = params->resp_ie_len;
 | |
| 		memcpy((void *)ev->cr.resp_ie, params->resp_ie,
 | |
| 		       params->resp_ie_len);
 | |
| 		next += params->resp_ie_len;
 | |
| 	}
 | |
| 	if (params->fils.kek_len) {
 | |
| 		ev->cr.fils.kek = next;
 | |
| 		ev->cr.fils.kek_len = params->fils.kek_len;
 | |
| 		memcpy((void *)ev->cr.fils.kek, params->fils.kek,
 | |
| 		       params->fils.kek_len);
 | |
| 		next += params->fils.kek_len;
 | |
| 	}
 | |
| 	if (params->fils.pmk_len) {
 | |
| 		ev->cr.fils.pmk = next;
 | |
| 		ev->cr.fils.pmk_len = params->fils.pmk_len;
 | |
| 		memcpy((void *)ev->cr.fils.pmk, params->fils.pmk,
 | |
| 		       params->fils.pmk_len);
 | |
| 		next += params->fils.pmk_len;
 | |
| 	}
 | |
| 	if (params->fils.pmkid) {
 | |
| 		ev->cr.fils.pmkid = next;
 | |
| 		memcpy((void *)ev->cr.fils.pmkid, params->fils.pmkid,
 | |
| 		       WLAN_PMKID_LEN);
 | |
| 		next += WLAN_PMKID_LEN;
 | |
| 	}
 | |
| 	ev->cr.fils.update_erp_next_seq_num = params->fils.update_erp_next_seq_num;
 | |
| 	if (params->fils.update_erp_next_seq_num)
 | |
| 		ev->cr.fils.erp_next_seq_num = params->fils.erp_next_seq_num;
 | |
| 	ev->cr.valid_links = params->valid_links;
 | |
| 	for_each_valid_link(params, link) {
 | |
| 		if (params->links[link].bss)
 | |
| 			cfg80211_hold_bss(
 | |
| 				bss_from_pub(params->links[link].bss));
 | |
| 		ev->cr.links[link].bss = params->links[link].bss;
 | |
| 		ev->cr.links[link].status = params->links[link].status;
 | |
| 
 | |
| 		if (params->links[link].addr) {
 | |
| 			ev->cr.links[link].addr = next;
 | |
| 			memcpy((void *)ev->cr.links[link].addr,
 | |
| 			       params->links[link].addr,
 | |
| 			       ETH_ALEN);
 | |
| 			next += ETH_ALEN;
 | |
| 		}
 | |
| 		if (params->links[link].bssid) {
 | |
| 			ev->cr.links[link].bssid = next;
 | |
| 			memcpy((void *)ev->cr.links[link].bssid,
 | |
| 			       params->links[link].bssid,
 | |
| 			       ETH_ALEN);
 | |
| 			next += ETH_ALEN;
 | |
| 		}
 | |
| 	}
 | |
| 	ev->cr.status = params->status;
 | |
| 	ev->cr.timeout_reason = params->timeout_reason;
 | |
| 
 | |
| 	spin_lock_irqsave(&wdev->event_lock, flags);
 | |
| 	list_add_tail(&ev->list, &wdev->event_list);
 | |
| 	spin_unlock_irqrestore(&wdev->event_lock, flags);
 | |
| 	queue_work(cfg80211_wq, &rdev->event_work);
 | |
| }
 | |
| EXPORT_SYMBOL(cfg80211_connect_done);
 | |
| 
 | |
| /* Consumes bss object one way or another */
 | |
| void __cfg80211_roamed(struct wireless_dev *wdev,
 | |
| 		       struct cfg80211_roam_info *info)
 | |
| {
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	union iwreq_data wrqu;
 | |
| #endif
 | |
| 	unsigned int link;
 | |
| 	const u8 *connected_addr;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
 | |
| 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
 | |
| 		goto out;
 | |
| 
 | |
| 	if (WARN_ON(!wdev->connected))
 | |
| 		goto out;
 | |
| 
 | |
| 	if (info->valid_links) {
 | |
| 		if (WARN_ON(!info->ap_mld_addr))
 | |
| 			goto out;
 | |
| 
 | |
| 		for_each_valid_link(info, link) {
 | |
| 			if (WARN_ON(!info->links[link].addr))
 | |
| 				goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	cfg80211_wdev_release_bsses(wdev);
 | |
| 
 | |
| 	for_each_valid_link(info, link) {
 | |
| 		if (WARN_ON(!info->links[link].bss))
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	memset(wdev->links, 0, sizeof(wdev->links));
 | |
| 	wdev->valid_links = info->valid_links;
 | |
| 	for_each_valid_link(info, link) {
 | |
| 		cfg80211_hold_bss(bss_from_pub(info->links[link].bss));
 | |
| 		wdev->links[link].client.current_bss =
 | |
| 			bss_from_pub(info->links[link].bss);
 | |
| 	}
 | |
| 
 | |
| 	connected_addr = info->valid_links ?
 | |
| 			 info->ap_mld_addr :
 | |
| 			 info->links[0].bss->bssid;
 | |
| 	ether_addr_copy(wdev->u.client.connected_addr, connected_addr);
 | |
| 	if (info->valid_links) {
 | |
| 		for_each_valid_link(info, link)
 | |
| 			memcpy(wdev->links[link].addr, info->links[link].addr,
 | |
| 			       ETH_ALEN);
 | |
| 	}
 | |
| 	wdev->unprot_beacon_reported = 0;
 | |
| 	nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy),
 | |
| 			    wdev->netdev, info, GFP_KERNEL);
 | |
| 
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	if (!info->valid_links) {
 | |
| 		if (info->req_ie) {
 | |
| 			memset(&wrqu, 0, sizeof(wrqu));
 | |
| 			wrqu.data.length = info->req_ie_len;
 | |
| 			wireless_send_event(wdev->netdev, IWEVASSOCREQIE,
 | |
| 					    &wrqu, info->req_ie);
 | |
| 		}
 | |
| 
 | |
| 		if (info->resp_ie) {
 | |
| 			memset(&wrqu, 0, sizeof(wrqu));
 | |
| 			wrqu.data.length = info->resp_ie_len;
 | |
| 			wireless_send_event(wdev->netdev, IWEVASSOCRESPIE,
 | |
| 					    &wrqu, info->resp_ie);
 | |
| 		}
 | |
| 
 | |
| 		memset(&wrqu, 0, sizeof(wrqu));
 | |
| 		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 | |
| 		memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN);
 | |
| 		memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN);
 | |
| 		wdev->wext.prev_bssid_valid = true;
 | |
| 		wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	return;
 | |
| out:
 | |
| 	for_each_valid_link(info, link)
 | |
| 		cfg80211_put_bss(wdev->wiphy, info->links[link].bss);
 | |
| }
 | |
| 
 | |
| /* Consumes info->links.bss object(s) one way or another */
 | |
| void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
 | |
| 		     gfp_t gfp)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_event *ev;
 | |
| 	unsigned long flags;
 | |
| 	u8 *next;
 | |
| 	unsigned int link;
 | |
| 	size_t link_info_size = 0;
 | |
| 	bool bss_not_found = false;
 | |
| 
 | |
| 	for_each_valid_link(info, link) {
 | |
| 		link_info_size += info->links[link].addr ? ETH_ALEN : 0;
 | |
| 		link_info_size += info->links[link].bssid ? ETH_ALEN : 0;
 | |
| 
 | |
| 		if (info->links[link].bss)
 | |
| 			continue;
 | |
| 
 | |
| 		info->links[link].bss =
 | |
| 			cfg80211_get_bss(wdev->wiphy,
 | |
| 					 info->links[link].channel,
 | |
| 					 info->links[link].bssid,
 | |
| 					 wdev->u.client.ssid,
 | |
| 					 wdev->u.client.ssid_len,
 | |
| 					 wdev->conn_bss_type,
 | |
| 					 IEEE80211_PRIVACY_ANY);
 | |
| 
 | |
| 		if (!info->links[link].bss) {
 | |
| 			bss_not_found = true;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (WARN_ON(bss_not_found))
 | |
| 		goto out;
 | |
| 
 | |
| 	ev = kzalloc(sizeof(*ev) + info->req_ie_len + info->resp_ie_len +
 | |
| 		     info->fils.kek_len + info->fils.pmk_len +
 | |
| 		     (info->fils.pmkid ? WLAN_PMKID_LEN : 0) +
 | |
| 		     (info->ap_mld_addr ? ETH_ALEN : 0) + link_info_size, gfp);
 | |
| 	if (!ev)
 | |
| 		goto out;
 | |
| 
 | |
| 	ev->type = EVENT_ROAMED;
 | |
| 	next = ((u8 *)ev) + sizeof(*ev);
 | |
| 	if (info->req_ie_len) {
 | |
| 		ev->rm.req_ie = next;
 | |
| 		ev->rm.req_ie_len = info->req_ie_len;
 | |
| 		memcpy((void *)ev->rm.req_ie, info->req_ie, info->req_ie_len);
 | |
| 		next += info->req_ie_len;
 | |
| 	}
 | |
| 	if (info->resp_ie_len) {
 | |
| 		ev->rm.resp_ie = next;
 | |
| 		ev->rm.resp_ie_len = info->resp_ie_len;
 | |
| 		memcpy((void *)ev->rm.resp_ie, info->resp_ie,
 | |
| 		       info->resp_ie_len);
 | |
| 		next += info->resp_ie_len;
 | |
| 	}
 | |
| 	if (info->fils.kek_len) {
 | |
| 		ev->rm.fils.kek = next;
 | |
| 		ev->rm.fils.kek_len = info->fils.kek_len;
 | |
| 		memcpy((void *)ev->rm.fils.kek, info->fils.kek,
 | |
| 		       info->fils.kek_len);
 | |
| 		next += info->fils.kek_len;
 | |
| 	}
 | |
| 	if (info->fils.pmk_len) {
 | |
| 		ev->rm.fils.pmk = next;
 | |
| 		ev->rm.fils.pmk_len = info->fils.pmk_len;
 | |
| 		memcpy((void *)ev->rm.fils.pmk, info->fils.pmk,
 | |
| 		       info->fils.pmk_len);
 | |
| 		next += info->fils.pmk_len;
 | |
| 	}
 | |
| 	if (info->fils.pmkid) {
 | |
| 		ev->rm.fils.pmkid = next;
 | |
| 		memcpy((void *)ev->rm.fils.pmkid, info->fils.pmkid,
 | |
| 		       WLAN_PMKID_LEN);
 | |
| 		next += WLAN_PMKID_LEN;
 | |
| 	}
 | |
| 	ev->rm.fils.update_erp_next_seq_num = info->fils.update_erp_next_seq_num;
 | |
| 	if (info->fils.update_erp_next_seq_num)
 | |
| 		ev->rm.fils.erp_next_seq_num = info->fils.erp_next_seq_num;
 | |
| 	if (info->ap_mld_addr) {
 | |
| 		ev->rm.ap_mld_addr = next;
 | |
| 		memcpy((void *)ev->rm.ap_mld_addr, info->ap_mld_addr,
 | |
| 		       ETH_ALEN);
 | |
| 		next += ETH_ALEN;
 | |
| 	}
 | |
| 	ev->rm.valid_links = info->valid_links;
 | |
| 	for_each_valid_link(info, link) {
 | |
| 		ev->rm.links[link].bss = info->links[link].bss;
 | |
| 
 | |
| 		if (info->links[link].addr) {
 | |
| 			ev->rm.links[link].addr = next;
 | |
| 			memcpy((void *)ev->rm.links[link].addr,
 | |
| 			       info->links[link].addr,
 | |
| 			       ETH_ALEN);
 | |
| 			next += ETH_ALEN;
 | |
| 		}
 | |
| 
 | |
| 		if (info->links[link].bssid) {
 | |
| 			ev->rm.links[link].bssid = next;
 | |
| 			memcpy((void *)ev->rm.links[link].bssid,
 | |
| 			       info->links[link].bssid,
 | |
| 			       ETH_ALEN);
 | |
| 			next += ETH_ALEN;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	spin_lock_irqsave(&wdev->event_lock, flags);
 | |
| 	list_add_tail(&ev->list, &wdev->event_list);
 | |
| 	spin_unlock_irqrestore(&wdev->event_lock, flags);
 | |
| 	queue_work(cfg80211_wq, &rdev->event_work);
 | |
| 
 | |
| 	return;
 | |
| out:
 | |
| 	for_each_valid_link(info, link)
 | |
| 		cfg80211_put_bss(wdev->wiphy, info->links[link].bss);
 | |
| 
 | |
| }
 | |
| EXPORT_SYMBOL(cfg80211_roamed);
 | |
| 
 | |
| void __cfg80211_port_authorized(struct wireless_dev *wdev, const u8 *peer_addr,
 | |
| 					const u8 *td_bitmap, u8 td_bitmap_len)
 | |
| {
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
 | |
| 		wdev->iftype != NL80211_IFTYPE_P2P_CLIENT &&
 | |
| 		wdev->iftype != NL80211_IFTYPE_AP &&
 | |
| 		wdev->iftype != NL80211_IFTYPE_P2P_GO))
 | |
| 		return;
 | |
| 
 | |
| 	if (wdev->iftype == NL80211_IFTYPE_STATION ||
 | |
| 		wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) {
 | |
| 		if (WARN_ON(!wdev->connected) ||
 | |
| 			WARN_ON(!ether_addr_equal(wdev->u.client.connected_addr, peer_addr)))
 | |
| 			return;
 | |
| 	}
 | |
| 
 | |
| 	nl80211_send_port_authorized(wiphy_to_rdev(wdev->wiphy), wdev->netdev,
 | |
| 				     peer_addr, td_bitmap, td_bitmap_len);
 | |
| }
 | |
| 
 | |
| void cfg80211_port_authorized(struct net_device *dev, const u8 *peer_addr,
 | |
| 			      const u8 *td_bitmap, u8 td_bitmap_len, gfp_t gfp)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_event *ev;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	if (WARN_ON(!peer_addr))
 | |
| 		return;
 | |
| 
 | |
| 	ev = kzalloc(sizeof(*ev) + td_bitmap_len, gfp);
 | |
| 	if (!ev)
 | |
| 		return;
 | |
| 
 | |
| 	ev->type = EVENT_PORT_AUTHORIZED;
 | |
| 	memcpy(ev->pa.peer_addr, peer_addr, ETH_ALEN);
 | |
| 	ev->pa.td_bitmap = ((u8 *)ev) + sizeof(*ev);
 | |
| 	ev->pa.td_bitmap_len = td_bitmap_len;
 | |
| 	memcpy((void *)ev->pa.td_bitmap, td_bitmap, td_bitmap_len);
 | |
| 
 | |
| 	/*
 | |
| 	 * Use the wdev event list so that if there are pending
 | |
| 	 * connected/roamed events, they will be reported first.
 | |
| 	 */
 | |
| 	spin_lock_irqsave(&wdev->event_lock, flags);
 | |
| 	list_add_tail(&ev->list, &wdev->event_list);
 | |
| 	spin_unlock_irqrestore(&wdev->event_lock, flags);
 | |
| 	queue_work(cfg80211_wq, &rdev->event_work);
 | |
| }
 | |
| EXPORT_SYMBOL(cfg80211_port_authorized);
 | |
| 
 | |
| void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
 | |
| 			     size_t ie_len, u16 reason, bool from_ap)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	int i;
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	union iwreq_data wrqu;
 | |
| #endif
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
 | |
| 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
 | |
| 		return;
 | |
| 
 | |
| 	cfg80211_wdev_release_bsses(wdev);
 | |
| 	wdev->valid_links = 0;
 | |
| 	wdev->connected = false;
 | |
| 	wdev->u.client.ssid_len = 0;
 | |
| 	wdev->conn_owner_nlportid = 0;
 | |
| 	kfree_sensitive(wdev->connect_keys);
 | |
| 	wdev->connect_keys = NULL;
 | |
| 
 | |
| 	nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap);
 | |
| 
 | |
| 	/* stop critical protocol if supported */
 | |
| 	if (rdev->ops->crit_proto_stop && rdev->crit_proto_nlportid) {
 | |
| 		rdev->crit_proto_nlportid = 0;
 | |
| 		rdev_crit_proto_stop(rdev, wdev);
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Delete all the keys ... pairwise keys can't really
 | |
| 	 * exist any more anyway, but default keys might.
 | |
| 	 */
 | |
| 	if (rdev->ops->del_key) {
 | |
| 		int max_key_idx = 5;
 | |
| 
 | |
| 		if (wiphy_ext_feature_isset(
 | |
| 			    wdev->wiphy,
 | |
| 			    NL80211_EXT_FEATURE_BEACON_PROTECTION) ||
 | |
| 		    wiphy_ext_feature_isset(
 | |
| 			    wdev->wiphy,
 | |
| 			    NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT))
 | |
| 			max_key_idx = 7;
 | |
| 		for (i = 0; i <= max_key_idx; i++)
 | |
| 			rdev_del_key(rdev, dev, -1, i, false, NULL);
 | |
| 	}
 | |
| 
 | |
| 	rdev_set_qos_map(rdev, dev, NULL);
 | |
| 
 | |
| #ifdef CONFIG_CFG80211_WEXT
 | |
| 	memset(&wrqu, 0, sizeof(wrqu));
 | |
| 	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 | |
| 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
 | |
| 	wdev->wext.connect.ssid_len = 0;
 | |
| #endif
 | |
| 
 | |
| 	schedule_work(&cfg80211_disconnect_work);
 | |
| 
 | |
| 	cfg80211_schedule_channels_check(wdev);
 | |
| }
 | |
| 
 | |
| void cfg80211_disconnected(struct net_device *dev, u16 reason,
 | |
| 			   const u8 *ie, size_t ie_len,
 | |
| 			   bool locally_generated, gfp_t gfp)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 	struct cfg80211_event *ev;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	ev = kzalloc(sizeof(*ev) + ie_len, gfp);
 | |
| 	if (!ev)
 | |
| 		return;
 | |
| 
 | |
| 	ev->type = EVENT_DISCONNECTED;
 | |
| 	ev->dc.ie = ((u8 *)ev) + sizeof(*ev);
 | |
| 	ev->dc.ie_len = ie_len;
 | |
| 	memcpy((void *)ev->dc.ie, ie, ie_len);
 | |
| 	ev->dc.reason = reason;
 | |
| 	ev->dc.locally_generated = locally_generated;
 | |
| 
 | |
| 	spin_lock_irqsave(&wdev->event_lock, flags);
 | |
| 	list_add_tail(&ev->list, &wdev->event_list);
 | |
| 	spin_unlock_irqrestore(&wdev->event_lock, flags);
 | |
| 	queue_work(cfg80211_wq, &rdev->event_work);
 | |
| }
 | |
| EXPORT_SYMBOL(cfg80211_disconnected);
 | |
| 
 | |
| /*
 | |
|  * API calls for nl80211/wext compatibility code
 | |
|  */
 | |
| int cfg80211_connect(struct cfg80211_registered_device *rdev,
 | |
| 		     struct net_device *dev,
 | |
| 		     struct cfg80211_connect_params *connect,
 | |
| 		     struct cfg80211_cached_keys *connkeys,
 | |
| 		     const u8 *prev_bssid)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	int err;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	/*
 | |
| 	 * If we have an ssid_len, we're trying to connect or are
 | |
| 	 * already connected, so reject a new SSID unless it's the
 | |
| 	 * same (which is the case for re-association.)
 | |
| 	 */
 | |
| 	if (wdev->u.client.ssid_len &&
 | |
| 	    (wdev->u.client.ssid_len != connect->ssid_len ||
 | |
| 	     memcmp(wdev->u.client.ssid, connect->ssid, wdev->u.client.ssid_len)))
 | |
| 		return -EALREADY;
 | |
| 
 | |
| 	/*
 | |
| 	 * If connected, reject (re-)association unless prev_bssid
 | |
| 	 * matches the current BSSID.
 | |
| 	 */
 | |
| 	if (wdev->connected) {
 | |
| 		if (!prev_bssid)
 | |
| 			return -EALREADY;
 | |
| 		if (!ether_addr_equal(prev_bssid,
 | |
| 				      wdev->u.client.connected_addr))
 | |
| 			return -ENOTCONN;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Reject if we're in the process of connecting with WEP,
 | |
| 	 * this case isn't very interesting and trying to handle
 | |
| 	 * it would make the code much more complex.
 | |
| 	 */
 | |
| 	if (wdev->connect_keys)
 | |
| 		return -EINPROGRESS;
 | |
| 
 | |
| 	cfg80211_oper_and_ht_capa(&connect->ht_capa_mask,
 | |
| 				  rdev->wiphy.ht_capa_mod_mask);
 | |
| 	cfg80211_oper_and_vht_capa(&connect->vht_capa_mask,
 | |
| 				   rdev->wiphy.vht_capa_mod_mask);
 | |
| 
 | |
| 	if (connkeys && connkeys->def >= 0) {
 | |
| 		int idx;
 | |
| 		u32 cipher;
 | |
| 
 | |
| 		idx = connkeys->def;
 | |
| 		cipher = connkeys->params[idx].cipher;
 | |
| 		/* If given a WEP key we may need it for shared key auth */
 | |
| 		if (cipher == WLAN_CIPHER_SUITE_WEP40 ||
 | |
| 		    cipher == WLAN_CIPHER_SUITE_WEP104) {
 | |
| 			connect->key_idx = idx;
 | |
| 			connect->key = connkeys->params[idx].key;
 | |
| 			connect->key_len = connkeys->params[idx].key_len;
 | |
| 
 | |
| 			/*
 | |
| 			 * If ciphers are not set (e.g. when going through
 | |
| 			 * iwconfig), we have to set them appropriately here.
 | |
| 			 */
 | |
| 			if (connect->crypto.cipher_group == 0)
 | |
| 				connect->crypto.cipher_group = cipher;
 | |
| 
 | |
| 			if (connect->crypto.n_ciphers_pairwise == 0) {
 | |
| 				connect->crypto.n_ciphers_pairwise = 1;
 | |
| 				connect->crypto.ciphers_pairwise[0] = cipher;
 | |
| 			}
 | |
| 		}
 | |
| 	} else {
 | |
| 		if (WARN_ON(connkeys))
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		/* connect can point to wdev->wext.connect which
 | |
| 		 * can hold key data from a previous connection
 | |
| 		 */
 | |
| 		connect->key = NULL;
 | |
| 		connect->key_len = 0;
 | |
| 		connect->key_idx = 0;
 | |
| 	}
 | |
| 
 | |
| 	wdev->connect_keys = connkeys;
 | |
| 	memcpy(wdev->u.client.ssid, connect->ssid, connect->ssid_len);
 | |
| 	wdev->u.client.ssid_len = connect->ssid_len;
 | |
| 
 | |
| 	wdev->conn_bss_type = connect->pbss ? IEEE80211_BSS_TYPE_PBSS :
 | |
| 					      IEEE80211_BSS_TYPE_ESS;
 | |
| 
 | |
| 	if (!rdev->ops->connect)
 | |
| 		err = cfg80211_sme_connect(wdev, connect, prev_bssid);
 | |
| 	else
 | |
| 		err = rdev_connect(rdev, dev, connect);
 | |
| 
 | |
| 	if (err) {
 | |
| 		wdev->connect_keys = NULL;
 | |
| 		/*
 | |
| 		 * This could be reassoc getting refused, don't clear
 | |
| 		 * ssid_len in that case.
 | |
| 		 */
 | |
| 		if (!wdev->connected)
 | |
| 			wdev->u.client.ssid_len = 0;
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
 | |
| 			struct net_device *dev, u16 reason, bool wextev)
 | |
| {
 | |
| 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 | |
| 	int err = 0;
 | |
| 
 | |
| 	lockdep_assert_wiphy(wdev->wiphy);
 | |
| 
 | |
| 	kfree_sensitive(wdev->connect_keys);
 | |
| 	wdev->connect_keys = NULL;
 | |
| 
 | |
| 	wdev->conn_owner_nlportid = 0;
 | |
| 
 | |
| 	if (wdev->conn)
 | |
| 		err = cfg80211_sme_disconnect(wdev, reason);
 | |
| 	else if (!rdev->ops->disconnect)
 | |
| 		cfg80211_mlme_down(rdev, dev);
 | |
| 	else if (wdev->u.client.ssid_len)
 | |
| 		err = rdev_disconnect(rdev, dev, reason);
 | |
| 
 | |
| 	/*
 | |
| 	 * Clear ssid_len unless we actually were fully connected,
 | |
| 	 * in which case cfg80211_disconnected() will take care of
 | |
| 	 * this later.
 | |
| 	 */
 | |
| 	if (!wdev->connected)
 | |
| 		wdev->u.client.ssid_len = 0;
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Used to clean up after the connection / connection attempt owner socket
 | |
|  * disconnects
 | |
|  */
 | |
| void cfg80211_autodisconnect_wk(struct work_struct *work)
 | |
| {
 | |
| 	struct wireless_dev *wdev =
 | |
| 		container_of(work, struct wireless_dev, disconnect_wk);
 | |
| 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
 | |
| 
 | |
| 	guard(wiphy)(wdev->wiphy);
 | |
| 
 | |
| 	if (wdev->conn_owner_nlportid) {
 | |
| 		switch (wdev->iftype) {
 | |
| 		case NL80211_IFTYPE_ADHOC:
 | |
| 			cfg80211_leave_ibss(rdev, wdev->netdev, false);
 | |
| 			break;
 | |
| 		case NL80211_IFTYPE_AP:
 | |
| 		case NL80211_IFTYPE_P2P_GO:
 | |
| 			cfg80211_stop_ap(rdev, wdev->netdev, -1, false);
 | |
| 			break;
 | |
| 		case NL80211_IFTYPE_MESH_POINT:
 | |
| 			cfg80211_leave_mesh(rdev, wdev->netdev);
 | |
| 			break;
 | |
| 		case NL80211_IFTYPE_STATION:
 | |
| 		case NL80211_IFTYPE_P2P_CLIENT:
 | |
| 			/*
 | |
| 			 * Use disconnect_bssid if still connecting and
 | |
| 			 * ops->disconnect not implemented.  Otherwise we can
 | |
| 			 * use cfg80211_disconnect.
 | |
| 			 */
 | |
| 			if (rdev->ops->disconnect || wdev->connected)
 | |
| 				cfg80211_disconnect(rdev, wdev->netdev,
 | |
| 						    WLAN_REASON_DEAUTH_LEAVING,
 | |
| 						    true);
 | |
| 			else
 | |
| 				cfg80211_mlme_deauth(rdev, wdev->netdev,
 | |
| 						     wdev->disconnect_bssid,
 | |
| 						     NULL, 0,
 | |
| 						     WLAN_REASON_DEAUTH_LEAVING,
 | |
| 						     false);
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| }
 |