nagai/kernel
3
0
Fork 0
forked from mirrors/linux
Code Pull requests Activity
kernel/include/linux/ext2_fs.h
Mark Bellon 8fc2751beb [PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts 
If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command.  The quota tools look there
for the quota strings for their operation.  If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.

While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.

The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks.  The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).

Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:

 - FS codes have to process the entire string of options anyway.

 - Only FS codes that use quotas must have a show_options function (for
   quotas to work properly) however quotas are only used in a small number
   of FS.

 - Since most of the quota using FS support other options these FS codes
   should have the a show_options function to show those options - and the
   quota echoing becomes virtually negligible.

Based on feedback I have modified my patches from the original:

   JFS a missing patch has been restored to the posting
   EXT[2|3] and JFS always use the show_options function
       - Each FS has at least one FS specific option displayed
       - QUOTA output is under a CONFIG_QUOTA ifdef
       - a follow-on patch will add a multitude of options for each FS
   EXT[2|3] and JFS "quota" is treated as "usrquota"
   EXT3 journalled data check for journalled quota removed
   EXT[2|3] mount when quota specified but not compiled in

 - no changes from my original patch.  I tested the patch and the codes
   warn but

 - still mount.  With all due respection I believe the comments
   otherwise were a

 - misread of the patch.  Please reread/test and comment.  XFS patch
   removed - the XFS team already made the necessary changes EXT3 mixing
   old and new quotas are handled differently (not purely exclusive)

 - if old and new quotas for the same type are used together the old
   type is silently depricated for compatability (e.g.  usrquota and
   usrjquota)

 - mixing of old and new quotas is an error (e.g.  usrjquota and
   grpquota)

Signed-off-by: Mark Bellon <mbellon@mvista.com>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:23 -07:00

557 lines
18 KiB
C
Raw Blame History

/*
* linux/include/linux/ext2_fs.h
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/include/linux/minix_fs.h
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#ifndef _LINUX_EXT2_FS_H
#define _LINUX_EXT2_FS_H
#include <linux/types.h>
#include <linux/ext2_fs_sb.h>
/*
* The second extended filesystem constants/structures
*/
/*
* Define EXT2FS_DEBUG to produce debug messages
*/
#undef EXT2FS_DEBUG
/*
* Define EXT2_PREALLOCATE to preallocate data blocks for expanding files
*/
#define EXT2_PREALLOCATE
#define EXT2_DEFAULT_PREALLOC_BLOCKS 8
/*
* The second extended file system version
*/
#define EXT2FS_DATE "95/08/09"
#define EXT2FS_VERSION "0.5b"
/*
* Debug code
*/
#ifdef EXT2FS_DEBUG
# define ext2_debug(f, a...) { \
printk ("EXT2-fs DEBUG (%s, %d): %s:", \
__FILE__, __LINE__, __FUNCTION__); \
printk (f, ## a); \
}
#else
# define ext2_debug(f, a...) /**/
#endif
/*
* Special inode numbers
*/
#define EXT2_BAD_INO 1 /* Bad blocks inode */
#define EXT2_ROOT_INO 2 /* Root inode */
#define EXT2_BOOT_LOADER_INO 5 /* Boot loader inode */
#define EXT2_UNDEL_DIR_INO 6 /* Undelete directory inode */
/* First non-reserved inode for old ext2 filesystems */
#define EXT2_GOOD_OLD_FIRST_INO 11
/*
* The second extended file system magic number
*/
#define EXT2_SUPER_MAGIC 0xEF53
#ifdef __KERNEL__
static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb)
{
return sb->s_fs_info;
}
#else
/* Assume that user mode programs are passing in an ext2fs superblock, not
* a kernel struct super_block. This will allow us to call the feature-test
* macros from user land. */
#define EXT2_SB(sb) (sb)
#endif
/*
* Maximal count of links to a file
*/
#define EXT2_LINK_MAX 32000
/*
* Macro-instructions used to manage several block sizes
*/
#define EXT2_MIN_BLOCK_SIZE 1024
#define EXT2_MAX_BLOCK_SIZE 4096
#define EXT2_MIN_BLOCK_LOG_SIZE 10
#ifdef __KERNEL__
# define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize)
#else
# define EXT2_BLOCK_SIZE(s) (EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#endif
#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32))
#ifdef __KERNEL__
# define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)
#else
# define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#endif
#ifdef __KERNEL__
#define EXT2_ADDR_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_addr_per_block_bits)
#define EXT2_INODE_SIZE(s) (EXT2_SB(s)->s_inode_size)
#define EXT2_FIRST_INO(s) (EXT2_SB(s)->s_first_ino)
#else
#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
EXT2_GOOD_OLD_INODE_SIZE : \
(s)->s_inode_size)
#define EXT2_FIRST_INO(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
EXT2_GOOD_OLD_FIRST_INO : \
(s)->s_first_ino)
#endif
/*
* Macro-instructions used to manage fragments
*/
#define EXT2_MIN_FRAG_SIZE 1024
#define EXT2_MAX_FRAG_SIZE 4096
#define EXT2_MIN_FRAG_LOG_SIZE 10
#ifdef __KERNEL__
# define EXT2_FRAG_SIZE(s) (EXT2_SB(s)->s_frag_size)
# define EXT2_FRAGS_PER_BLOCK(s) (EXT2_SB(s)->s_frags_per_block)
#else
# define EXT2_FRAG_SIZE(s) (EXT2_MIN_FRAG_SIZE << (s)->s_log_frag_size)
# define EXT2_FRAGS_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / EXT2_FRAG_SIZE(s))
#endif
/*
* Structure of a blocks group descriptor
*/
struct ext2_group_desc
{
__le32 bg_block_bitmap; /* Blocks bitmap block */
__le32 bg_inode_bitmap; /* Inodes bitmap block */
__le32 bg_inode_table; /* Inodes table block */
__le16 bg_free_blocks_count; /* Free blocks count */
__le16 bg_free_inodes_count; /* Free inodes count */
__le16 bg_used_dirs_count; /* Directories count */
__le16 bg_pad;
__le32 bg_reserved[3];
};
/*
* Macro-instructions used to manage group descriptors
*/
#ifdef __KERNEL__
# define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_group)
# define EXT2_DESC_PER_BLOCK(s) (EXT2_SB(s)->s_desc_per_block)
# define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_group)
# define EXT2_DESC_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_desc_per_block_bits)
#else
# define EXT2_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group)
# define EXT2_DESC_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc))
# define EXT2_INODES_PER_GROUP(s) ((s)->s_inodes_per_group)
#endif
/*
* Constants relative to the data blocks
*/
#define EXT2_NDIR_BLOCKS 12
#define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS
#define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1)
#define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1)
#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1)
/*
* Inode flags
*/
#define EXT2_SECRM_FL 0x00000001 /* Secure deletion */
#define EXT2_UNRM_FL 0x00000002 /* Undelete */
#define EXT2_COMPR_FL 0x00000004 /* Compress file */
#define EXT2_SYNC_FL 0x00000008 /* Synchronous updates */
#define EXT2_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define EXT2_APPEND_FL 0x00000020 /* writes to file may only append */
#define EXT2_NODUMP_FL 0x00000040 /* do not dump file */
#define EXT2_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define EXT2_DIRTY_FL 0x00000100
#define EXT2_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define EXT2_NOCOMP_FL 0x00000400 /* Don't compress */
#define EXT2_ECOMPR_FL 0x00000800 /* Compression error */
/* End compression flags --- maybe not all used */
#define EXT2_BTREE_FL 0x00001000 /* btree format dir */
#define EXT2_INDEX_FL 0x00001000 /* hash-indexed directory */
#define EXT2_IMAGIC_FL 0x00002000 /* AFS directory */
#define EXT2_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
#define EXT2_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define EXT2_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define EXT2_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define EXT2_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define EXT2_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define EXT2_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
/*
* ioctl commands
*/
#define EXT2_IOC_GETFLAGS _IOR('f', 1, long)
#define EXT2_IOC_SETFLAGS _IOW('f', 2, long)
#define EXT2_IOC_GETVERSION _IOR('v', 1, long)
#define EXT2_IOC_SETVERSION _IOW('v', 2, long)
/*
* Structure of an inode on the disk
*/
struct ext2_inode {
__le16 i_mode; /* File mode */
__le16 i_uid; /* Low 16 bits of Owner Uid */
__le32 i_size; /* Size in bytes */
__le32 i_atime; /* Access time */
__le32 i_ctime; /* Creation time */
__le32 i_mtime; /* Modification time */
__le32 i_dtime; /* Deletion Time */
__le16 i_gid; /* Low 16 bits of Group Id */
__le16 i_links_count; /* Links count */
__le32 i_blocks; /* Blocks count */
__le32 i_flags; /* File flags */
union {
struct {
__le32 l_i_reserved1;
} linux1;
struct {
__le32 h_i_translator;
} hurd1;
struct {
__le32 m_i_reserved1;
} masix1;
} osd1; /* OS dependent 1 */
__le32 i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
__le32 i_generation; /* File version (for NFS) */
__le32 i_file_acl; /* File ACL */
__le32 i_dir_acl; /* Directory ACL */
__le32 i_faddr; /* Fragment address */
union {
struct {
__u8 l_i_frag; /* Fragment number */
__u8 l_i_fsize; /* Fragment size */
__u16 i_pad1;
__le16 l_i_uid_high; /* these 2 fields */
__le16 l_i_gid_high; /* were reserved2[0] */
__u32 l_i_reserved2;
} linux2;
struct {
__u8 h_i_frag; /* Fragment number */
__u8 h_i_fsize; /* Fragment size */
__le16 h_i_mode_high;
__le16 h_i_uid_high;
__le16 h_i_gid_high;
__le32 h_i_author;
} hurd2;
struct {
__u8 m_i_frag; /* Fragment number */
__u8 m_i_fsize; /* Fragment size */
__u16 m_pad1;
__u32 m_i_reserved2[2];
} masix2;
} osd2; /* OS dependent 2 */
};
#define i_size_high i_dir_acl
#if defined(__KERNEL__) || defined(__linux__)
#define i_reserved1 osd1.linux1.l_i_reserved1
#define i_frag osd2.linux2.l_i_frag
#define i_fsize osd2.linux2.l_i_fsize
#define i_uid_low i_uid
#define i_gid_low i_gid
#define i_uid_high osd2.linux2.l_i_uid_high
#define i_gid_high osd2.linux2.l_i_gid_high
#define i_reserved2 osd2.linux2.l_i_reserved2
#endif
#ifdef __hurd__
#define i_translator osd1.hurd1.h_i_translator
#define i_frag osd2.hurd2.h_i_frag;
#define i_fsize osd2.hurd2.h_i_fsize;
#define i_uid_high osd2.hurd2.h_i_uid_high
#define i_gid_high osd2.hurd2.h_i_gid_high
#define i_author osd2.hurd2.h_i_author
#endif
#ifdef __masix__
#define i_reserved1 osd1.masix1.m_i_reserved1
#define i_frag osd2.masix2.m_i_frag
#define i_fsize osd2.masix2.m_i_fsize
#define i_reserved2 osd2.masix2.m_i_reserved2
#endif
/*
* File system states
*/
#define EXT2_VALID_FS 0x0001 /* Unmounted cleanly */
#define EXT2_ERROR_FS 0x0002 /* Errors detected */
/*
* Mount flags
*/
#define EXT2_MOUNT_CHECK 0x000001 /* Do mount-time checks */
#define EXT2_MOUNT_OLDALLOC 0x000002 /* Don't use the new Orlov allocator */
#define EXT2_MOUNT_GRPID 0x000004 /* Create files with directory's group */
#define EXT2_MOUNT_DEBUG 0x000008 /* Some debugging messages */
#define EXT2_MOUNT_ERRORS_CONT 0x000010 /* Continue on errors */
#define EXT2_MOUNT_ERRORS_RO 0x000020 /* Remount fs ro on errors */
#define EXT2_MOUNT_ERRORS_PANIC 0x000040 /* Panic on errors */
#define EXT2_MOUNT_MINIX_DF 0x000080 /* Mimics the Minix statfs */
#define EXT2_MOUNT_NOBH 0x000100 /* No buffer_heads */
#define EXT2_MOUNT_NO_UID32 0x000200 /* Disable 32-bit UIDs */
#define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */
#define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */
#define EXT2_MOUNT_XIP 0x010000 /* Execute in place */
#define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */
#define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */
#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt
#define set_opt(o, opt) o |= EXT2_MOUNT_##opt
#define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \
EXT2_MOUNT_##opt)
/*
* Maximal mount counts between two filesystem checks
*/
#define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */
#define EXT2_DFL_CHECKINTERVAL 0 /* Don't use interval check */
/*
* Behaviour when detecting errors
*/
#define EXT2_ERRORS_CONTINUE 1 /* Continue execution */
#define EXT2_ERRORS_RO 2 /* Remount fs read-only */
#define EXT2_ERRORS_PANIC 3 /* Panic */
#define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE
/*
* Structure of the super block
*/
struct ext2_super_block {
__le32 s_inodes_count; /* Inodes count */
__le32 s_blocks_count; /* Blocks count */
__le32 s_r_blocks_count; /* Reserved blocks count */
__le32 s_free_blocks_count; /* Free blocks count */
__le32 s_free_inodes_count; /* Free inodes count */
__le32 s_first_data_block; /* First Data Block */
__le32 s_log_block_size; /* Block size */
__le32 s_log_frag_size; /* Fragment size */
__le32 s_blocks_per_group; /* # Blocks per group */
__le32 s_frags_per_group; /* # Fragments per group */
__le32 s_inodes_per_group; /* # Inodes per group */
__le32 s_mtime; /* Mount time */
__le32 s_wtime; /* Write time */
__le16 s_mnt_count; /* Mount count */
__le16 s_max_mnt_count; /* Maximal mount count */
__le16 s_magic; /* Magic signature */
__le16 s_state; /* File system state */
__le16 s_errors; /* Behaviour when detecting errors */
__le16 s_minor_rev_level; /* minor revision level */
__le32 s_lastcheck; /* time of last check */
__le32 s_checkinterval; /* max. time between checks */
__le32 s_creator_os; /* OS */
__le32 s_rev_level; /* Revision level */
__le16 s_def_resuid; /* Default uid for reserved blocks */
__le16 s_def_resgid; /* Default gid for reserved blocks */
/*
* These fields are for EXT2_DYNAMIC_REV superblocks only.
*
* Note: the difference between the compatible feature set and
* the incompatible feature set is that if there is a bit set
* in the incompatible feature set that the kernel doesn't
* know about, it should refuse to mount the filesystem.
*
* e2fsck's requirements are more strict; if it doesn't know
* about a feature in either the compatible or incompatible
* feature set, it must abort and not try to meddle with
* things it doesn't understand...
*/
__le32 s_first_ino; /* First non-reserved inode */
__le16 s_inode_size; /* size of inode structure */
__le16 s_block_group_nr; /* block group # of this superblock */
__le32 s_feature_compat; /* compatible feature set */
__le32 s_feature_incompat; /* incompatible feature set */
__le32 s_feature_ro_compat; /* readonly-compatible feature set */
__u8 s_uuid[16]; /* 128-bit uuid for volume */
char s_volume_name[16]; /* volume name */
char s_last_mounted[64]; /* directory where last mounted */
__le32 s_algorithm_usage_bitmap; /* For compression */
/*
* Performance hints. Directory preallocation should only
* happen if the EXT2_COMPAT_PREALLOC flag is on.
*/
__u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/
__u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */
__u16 s_padding1;
/*
* Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set.
*/
__u8 s_journal_uuid[16]; /* uuid of journal superblock */
__u32 s_journal_inum; /* inode number of journal file */
__u32 s_journal_dev; /* device number of journal file */
__u32 s_last_orphan; /* start of list of inodes to delete */
__u32 s_hash_seed[4]; /* HTREE hash seed */
__u8 s_def_hash_version; /* Default hash version to use */
__u8 s_reserved_char_pad;
__u16 s_reserved_word_pad;
__le32 s_default_mount_opts;
__le32 s_first_meta_bg; /* First metablock block group */
__u32 s_reserved[190]; /* Padding to the end of the block */
};
/*
* Codes for operating systems
*/
#define EXT2_OS_LINUX 0
#define EXT2_OS_HURD 1
#define EXT2_OS_MASIX 2
#define EXT2_OS_FREEBSD 3
#define EXT2_OS_LITES 4
/*
* Revision levels
*/
#define EXT2_GOOD_OLD_REV 0 /* The good old (original) format */
#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */
#define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV
#define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV
#define EXT2_GOOD_OLD_INODE_SIZE 128
/*
* Feature set definitions
*/
#define EXT2_HAS_COMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) )
#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) )
#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) )
#define EXT2_SET_COMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask)
#define EXT2_SET_RO_COMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask)
#define EXT2_SET_INCOMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask)
#define EXT2_CLEAR_COMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask)
#define EXT2_CLEAR_RO_COMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask)
#define EXT2_CLEAR_INCOMPAT_FEATURE(sb,mask) \
EXT2_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask)
#define EXT2_FEATURE_COMPAT_DIR_PREALLOC 0x0001
#define EXT2_FEATURE_COMPAT_IMAGIC_INODES 0x0002
#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004
#define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008
#define EXT2_FEATURE_COMPAT_RESIZE_INO 0x0010
#define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020
#define EXT2_FEATURE_COMPAT_ANY 0xffffffff
#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001
#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE 0x0002
#define EXT2_FEATURE_RO_COMPAT_BTREE_DIR 0x0004
#define EXT2_FEATURE_RO_COMPAT_ANY 0xffffffff
#define EXT2_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002
#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004
#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008
#define EXT2_FEATURE_INCOMPAT_META_BG 0x0010
#define EXT2_FEATURE_INCOMPAT_ANY 0xffffffff
#define EXT2_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR
#define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_FILETYPE| \
EXT2_FEATURE_INCOMPAT_META_BG)
#define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
#define EXT2_FEATURE_RO_COMPAT_UNSUPPORTED ~EXT2_FEATURE_RO_COMPAT_SUPP
#define EXT2_FEATURE_INCOMPAT_UNSUPPORTED ~EXT2_FEATURE_INCOMPAT_SUPP
/*
* Default values for user and/or group using reserved blocks
*/
#define EXT2_DEF_RESUID 0
#define EXT2_DEF_RESGID 0
/*
* Default mount options
*/
#define EXT2_DEFM_DEBUG 0x0001
#define EXT2_DEFM_BSDGROUPS 0x0002
#define EXT2_DEFM_XATTR_USER 0x0004
#define EXT2_DEFM_ACL 0x0008
#define EXT2_DEFM_UID16 0x0010
/* Not used by ext2, but reserved for use by ext3 */
#define EXT3_DEFM_JMODE 0x0060
#define EXT3_DEFM_JMODE_DATA 0x0020
#define EXT3_DEFM_JMODE_ORDERED 0x0040
#define EXT3_DEFM_JMODE_WBACK 0x0060
/*
* Structure of a directory entry
*/
#define EXT2_NAME_LEN 255
struct ext2_dir_entry {
__le32 inode; /* Inode number */
__le16 rec_len; /* Directory entry length */
__le16 name_len; /* Name length */
char name[EXT2_NAME_LEN]; /* File name */
};
/*
* The new version of the directory entry. Since EXT2 structures are
* stored in intel byte order, and the name_len field could never be
* bigger than 255 chars, it's safe to reclaim the extra byte for the
* file_type field.
*/
struct ext2_dir_entry_2 {
__le32 inode; /* Inode number */
__le16 rec_len; /* Directory entry length */
__u8 name_len; /* Name length */
__u8 file_type;
char name[EXT2_NAME_LEN]; /* File name */
};
/*
* Ext2 directory file types. Only the low 3 bits are used. The
* other bits are reserved for now.
*/
enum {
EXT2_FT_UNKNOWN,
EXT2_FT_REG_FILE,
EXT2_FT_DIR,
EXT2_FT_CHRDEV,
EXT2_FT_BLKDEV,
EXT2_FT_FIFO,
EXT2_FT_SOCK,
EXT2_FT_SYMLINK,
EXT2_FT_MAX
};
/*
* EXT2_DIR_PAD defines the directory entries boundaries
*
* NOTE: It must be a multiple of 4
*/
#define EXT2_DIR_PAD 4
#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1)
#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \
~EXT2_DIR_ROUND)
#endif /* _LINUX_EXT2_FS_H */
View git blame Copy permalink