forked from mirrors/linux
		
	core:
 - Some cleanups and fixes in the self-refresh helpers
 - Some cleanups and fixes in the atomic helpers
 
 amdgpu:
 - Fix a 64 bit divide
 - Prevent a memory leak in a failure case in dc
 - Load proper gfx firmware on navi14 variants
 - Add more navi12 and navi14 PCI ids
 - Misc fixes for renoir
 - Fix bandwidth issues with multiple displays on vega20
 - Support for Dali
 - Fix a possible oops with KFD on hawaii
 - Fix for backlight level after resume on some APUs
 - Other misc fixes
 
 panfrost:
 - Multiple panfrost fixes for regulator support and page fault handling
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdjZr6AAoJEAx081l5xIa+nboP+gPWzx45Q3IsbnaZmcdFTFEf
 +/XgScoFcv5Uhd3aXtrSYDvPnSyNXpGsV5ccE/FtxNd4G75n20tPFxGNhjzyXfdc
 B2x1IRgc82W1KxYwwDlmd+f/86h6uthFkh1ToKN3hsHWNm8Wu8AgoJnoWvqwluf9
 natSFnQPQIvcADpbpyk8FiNcXvMg0qrKQ8aj3uPxqUs4/ftigzez+5vYJOkktoEJ
 NFtlouVvIZejVo6l4Q5ebXXsol7On02iHUszpdJtb5FxMcBQwAafewCGln2622cA
 8ooWmekZNtoHUH3WmUlrs7TqPKtoOqIEkMO8UvCJDwBB4/ft8sJRPDKFgk547E/8
 Htv6MZXCSOT+/XxebM/wHijOg3MQVjPzO9s73YSmkytzGZVQ/Fgohl/6W+bN/xAm
 j/huS5ZozengAldFJHG4wruSk820Vzx736x2pk+9sbpf7PdFDIpuZus8U8wHc411
 hu3S2397IxyX4XswLg8BTaIOhCXwT7CluQ9mYD1THPgRzG5YPha8JelTcwwlVsD9
 2Cw6mCUAqydHHMboWQnEhRXhuhVfGlPAdJTsdyoI6zdXYqU/ThihJPBgG0wSq0y0
 fAsj/9NRqSzg6hk9vm1QdCeOthKOuAZ0PgLcVHI1RNSwEyrN8yOupVwe7+Mn+q2z
 UNbfr2qXGqKxn6rqUy2W
 =yCyF
 -----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
 "Fixes built up over the past 1.5 weeks or so, it's two weeks of
  amdgpu, some core cleanups and some panfrost fixes. I also finally
  figured out why my desktop was slow to do a bunch of stuff (someone
  gave it an IPv6 address which can't reach anything!).
  core:
   - Some cleanups and fixes in the self-refresh helpers
   - Some cleanups and fixes in the atomic helpers
  amdgpu:
   - Fix a 64 bit divide
   - Prevent a memory leak in a failure case in dc
   - Load proper gfx firmware on navi14 variants
   - Add more navi12 and navi14 PCI ids
   - Misc fixes for renoir
   - Fix bandwidth issues with multiple displays on vega20
   - Support for Dali
   - Fix a possible oops with KFD on hawaii
   - Fix for backlight level after resume on some APUs
   - Other misc fixes
  panfrost:
   - Multiple panfrost fixes for regulator support and page fault
     handling"
* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/amd/display: prevent memory leak
  drm/amdgpu/gfx10: add support for wks firmware loading
  drm/amdgpu/display: include slab.h in dcn21_resource.c
  drm/amdgpu/display: fix 64 bit divide
  drm/panfrost: Prevent race when handling page fault
  drm/panfrost: Remove NULL checks for regulator
  drm/panfrost: Fix regulator_get_optional() misuse
  drm: Measure Self Refresh Entry/Exit times to avoid thrashing
  drm: Fix kerneldoc and remove unused struct member in self_refresh helper
  drm/atomic: Rename crtc_state->pageflip_flags to async_flip
  drm/atomic: Reject FLIP_ASYNC unconditionally
  drm/atomic: Take the atomic toys away from X
  drm/amdgpu: flag navi12 and 14 as experimental for 5.4
  drm/kms: Duct-tape for mode object lifetime checks
  drm/amdgpu: add navi12 pci id
  drm/amdgpu: add navi14 PCI ID for work station SKU
  drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
  drm/amd/powerplay: implement sysfs for getting dpm clock
  drm/amd/display: Restore backlight brightness after system resume
  drm/amd/display: Implement voltage limitation for dali
  ...
		
	
			
		
			
				
	
	
		
			1321 lines
		
	
	
	
		
			35 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1321 lines
		
	
	
	
		
			35 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0-only
 | 
						|
/*
 | 
						|
 * Analog Devices ADV7511 HDMI transmitter driver
 | 
						|
 *
 | 
						|
 * Copyright 2012 Analog Devices Inc.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/device.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/of_device.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
 | 
						|
#include <media/cec.h>
 | 
						|
 | 
						|
#include <drm/drm_atomic.h>
 | 
						|
#include <drm/drm_atomic_helper.h>
 | 
						|
#include <drm/drm_edid.h>
 | 
						|
#include <drm/drm_print.h>
 | 
						|
#include <drm/drm_probe_helper.h>
 | 
						|
 | 
						|
#include "adv7511.h"
 | 
						|
 | 
						|
/* ADI recommended values for proper operation. */
 | 
						|
static const struct reg_sequence adv7511_fixed_registers[] = {
 | 
						|
	{ 0x98, 0x03 },
 | 
						|
	{ 0x9a, 0xe0 },
 | 
						|
	{ 0x9c, 0x30 },
 | 
						|
	{ 0x9d, 0x61 },
 | 
						|
	{ 0xa2, 0xa4 },
 | 
						|
	{ 0xa3, 0xa4 },
 | 
						|
	{ 0xe0, 0xd0 },
 | 
						|
	{ 0xf9, 0x00 },
 | 
						|
	{ 0x55, 0x02 },
 | 
						|
};
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * Register access
 | 
						|
 */
 | 
						|
 | 
						|
static const uint8_t adv7511_register_defaults[] = {
 | 
						|
	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
 | 
						|
	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
 | 
						|
	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
 | 
						|
	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
 | 
						|
	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
 | 
						|
	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
 | 
						|
	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
 | 
						|
	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
 | 
						|
	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
 | 
						|
	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
 | 
						|
	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
 | 
						|
	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
 | 
						|
	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
 | 
						|
	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
 | 
						|
	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 | 
						|
};
 | 
						|
 | 
						|
static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
 | 
						|
{
 | 
						|
	switch (reg) {
 | 
						|
	case ADV7511_REG_CHIP_REVISION:
 | 
						|
	case ADV7511_REG_SPDIF_FREQ:
 | 
						|
	case ADV7511_REG_CTS_AUTOMATIC1:
 | 
						|
	case ADV7511_REG_CTS_AUTOMATIC2:
 | 
						|
	case ADV7511_REG_VIC_DETECTED:
 | 
						|
	case ADV7511_REG_VIC_SEND:
 | 
						|
	case ADV7511_REG_AUX_VIC_DETECTED:
 | 
						|
	case ADV7511_REG_STATUS:
 | 
						|
	case ADV7511_REG_GC(1):
 | 
						|
	case ADV7511_REG_INT(0):
 | 
						|
	case ADV7511_REG_INT(1):
 | 
						|
	case ADV7511_REG_PLL_STATUS:
 | 
						|
	case ADV7511_REG_AN(0):
 | 
						|
	case ADV7511_REG_AN(1):
 | 
						|
	case ADV7511_REG_AN(2):
 | 
						|
	case ADV7511_REG_AN(3):
 | 
						|
	case ADV7511_REG_AN(4):
 | 
						|
	case ADV7511_REG_AN(5):
 | 
						|
	case ADV7511_REG_AN(6):
 | 
						|
	case ADV7511_REG_AN(7):
 | 
						|
	case ADV7511_REG_HDCP_STATUS:
 | 
						|
	case ADV7511_REG_BCAPS:
 | 
						|
	case ADV7511_REG_BKSV(0):
 | 
						|
	case ADV7511_REG_BKSV(1):
 | 
						|
	case ADV7511_REG_BKSV(2):
 | 
						|
	case ADV7511_REG_BKSV(3):
 | 
						|
	case ADV7511_REG_BKSV(4):
 | 
						|
	case ADV7511_REG_DDC_STATUS:
 | 
						|
	case ADV7511_REG_EDID_READ_CTRL:
 | 
						|
	case ADV7511_REG_BSTATUS(0):
 | 
						|
	case ADV7511_REG_BSTATUS(1):
 | 
						|
	case ADV7511_REG_CHIP_ID_HIGH:
 | 
						|
	case ADV7511_REG_CHIP_ID_LOW:
 | 
						|
		return true;
 | 
						|
	}
 | 
						|
 | 
						|
	return false;
 | 
						|
}
 | 
						|
 | 
						|
static const struct regmap_config adv7511_regmap_config = {
 | 
						|
	.reg_bits = 8,
 | 
						|
	.val_bits = 8,
 | 
						|
 | 
						|
	.max_register = 0xff,
 | 
						|
	.cache_type = REGCACHE_RBTREE,
 | 
						|
	.reg_defaults_raw = adv7511_register_defaults,
 | 
						|
	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
 | 
						|
 | 
						|
	.volatile_reg = adv7511_register_volatile,
 | 
						|
};
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * Hardware configuration
 | 
						|
 */
 | 
						|
 | 
						|
static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
 | 
						|
				 const uint16_t *coeff,
 | 
						|
				 unsigned int scaling_factor)
 | 
						|
{
 | 
						|
	unsigned int i;
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
 | 
						|
			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
 | 
						|
 | 
						|
	if (enable) {
 | 
						|
		for (i = 0; i < 12; ++i) {
 | 
						|
			regmap_update_bits(adv7511->regmap,
 | 
						|
					   ADV7511_REG_CSC_UPPER(i),
 | 
						|
					   0x1f, coeff[i] >> 8);
 | 
						|
			regmap_write(adv7511->regmap,
 | 
						|
				     ADV7511_REG_CSC_LOWER(i),
 | 
						|
				     coeff[i] & 0xff);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (enable)
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
 | 
						|
				   0xe0, 0x80 | (scaling_factor << 5));
 | 
						|
	else
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
 | 
						|
				   0x80, 0x00);
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
 | 
						|
			   ADV7511_CSC_UPDATE_MODE, 0);
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
 | 
						|
{
 | 
						|
	if (packet & 0xff)
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
 | 
						|
				   packet, 0xff);
 | 
						|
 | 
						|
	if (packet & 0xff00) {
 | 
						|
		packet >>= 8;
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
 | 
						|
				   packet, 0xff);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
 | 
						|
{
 | 
						|
	if (packet & 0xff)
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
 | 
						|
				   packet, 0x00);
 | 
						|
 | 
						|
	if (packet & 0xff00) {
 | 
						|
		packet >>= 8;
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
 | 
						|
				   packet, 0x00);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* Coefficients for adv7511 color space conversion */
 | 
						|
static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
 | 
						|
	0x0734, 0x04ad, 0x0000, 0x1c1b,
 | 
						|
	0x1ddc, 0x04ad, 0x1f24, 0x0135,
 | 
						|
	0x0000, 0x04ad, 0x087c, 0x1b77,
 | 
						|
};
 | 
						|
 | 
						|
static void adv7511_set_config_csc(struct adv7511 *adv7511,
 | 
						|
				   struct drm_connector *connector,
 | 
						|
				   bool rgb, bool hdmi_mode)
 | 
						|
{
 | 
						|
	struct adv7511_video_config config;
 | 
						|
	bool output_format_422, output_format_ycbcr;
 | 
						|
	unsigned int mode;
 | 
						|
	uint8_t infoframe[17];
 | 
						|
 | 
						|
	config.hdmi_mode = hdmi_mode;
 | 
						|
 | 
						|
	hdmi_avi_infoframe_init(&config.avi_infoframe);
 | 
						|
 | 
						|
	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
 | 
						|
 | 
						|
	if (rgb) {
 | 
						|
		config.csc_enable = false;
 | 
						|
		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
 | 
						|
	} else {
 | 
						|
		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
 | 
						|
		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
 | 
						|
 | 
						|
		if ((connector->display_info.color_formats &
 | 
						|
		     DRM_COLOR_FORMAT_YCRCB422) &&
 | 
						|
		    config.hdmi_mode) {
 | 
						|
			config.csc_enable = false;
 | 
						|
			config.avi_infoframe.colorspace =
 | 
						|
				HDMI_COLORSPACE_YUV422;
 | 
						|
		} else {
 | 
						|
			config.csc_enable = true;
 | 
						|
			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (config.hdmi_mode) {
 | 
						|
		mode = ADV7511_HDMI_CFG_MODE_HDMI;
 | 
						|
 | 
						|
		switch (config.avi_infoframe.colorspace) {
 | 
						|
		case HDMI_COLORSPACE_YUV444:
 | 
						|
			output_format_422 = false;
 | 
						|
			output_format_ycbcr = true;
 | 
						|
			break;
 | 
						|
		case HDMI_COLORSPACE_YUV422:
 | 
						|
			output_format_422 = true;
 | 
						|
			output_format_ycbcr = true;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			output_format_422 = false;
 | 
						|
			output_format_ycbcr = false;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		mode = ADV7511_HDMI_CFG_MODE_DVI;
 | 
						|
		output_format_422 = false;
 | 
						|
		output_format_ycbcr = false;
 | 
						|
	}
 | 
						|
 | 
						|
	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
 | 
						|
 | 
						|
	adv7511_set_colormap(adv7511, config.csc_enable,
 | 
						|
			     config.csc_coefficents,
 | 
						|
			     config.csc_scaling_factor);
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
 | 
						|
			   (output_format_422 << 7) | output_format_ycbcr);
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
 | 
						|
			   ADV7511_HDMI_CFG_MODE_MASK, mode);
 | 
						|
 | 
						|
	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
 | 
						|
				sizeof(infoframe));
 | 
						|
 | 
						|
	/* The AVI infoframe id is not configurable */
 | 
						|
	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
 | 
						|
			  infoframe + 1, sizeof(infoframe) - 1);
 | 
						|
 | 
						|
	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_set_link_config(struct adv7511 *adv7511,
 | 
						|
				    const struct adv7511_link_config *config)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * The input style values documented in the datasheet don't match the
 | 
						|
	 * hardware register field values :-(
 | 
						|
	 */
 | 
						|
	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
 | 
						|
 | 
						|
	unsigned int clock_delay;
 | 
						|
	unsigned int color_depth;
 | 
						|
	unsigned int input_id;
 | 
						|
 | 
						|
	clock_delay = (config->clock_delay + 1200) / 400;
 | 
						|
	color_depth = config->input_color_depth == 8 ? 3
 | 
						|
		    : (config->input_color_depth == 10 ? 1 : 2);
 | 
						|
 | 
						|
	/* TODO Support input ID 6 */
 | 
						|
	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
 | 
						|
		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
 | 
						|
			 ? 5 : 0;
 | 
						|
	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
 | 
						|
		input_id = config->embedded_sync ? 8 : 7;
 | 
						|
	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
 | 
						|
		input_id = config->embedded_sync ? 4 : 3;
 | 
						|
	else
 | 
						|
		input_id = config->embedded_sync ? 2 : 1;
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
 | 
						|
			   input_id);
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
 | 
						|
			   (color_depth << 4) |
 | 
						|
			   (input_styles[config->input_style] << 2));
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
 | 
						|
		     config->input_justification << 3);
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
 | 
						|
		     config->sync_pulse << 2);
 | 
						|
 | 
						|
	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
 | 
						|
 | 
						|
	adv7511->embedded_sync = config->embedded_sync;
 | 
						|
	adv7511->hsync_polarity = config->hsync_polarity;
 | 
						|
	adv7511->vsync_polarity = config->vsync_polarity;
 | 
						|
	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
 | 
						|
}
 | 
						|
 | 
						|
static void __adv7511_power_on(struct adv7511 *adv7511)
 | 
						|
{
 | 
						|
	adv7511->current_edid_segment = -1;
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | 
						|
			   ADV7511_POWER_POWER_DOWN, 0);
 | 
						|
	if (adv7511->i2c_main->irq) {
 | 
						|
		/*
 | 
						|
		 * Documentation says the INT_ENABLE registers are reset in
 | 
						|
		 * POWER_DOWN mode. My 7511w preserved the bits, however.
 | 
						|
		 * Still, let's be safe and stick to the documentation.
 | 
						|
		 */
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
 | 
						|
			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
 | 
						|
		regmap_update_bits(adv7511->regmap,
 | 
						|
				   ADV7511_REG_INT_ENABLE(1),
 | 
						|
				   ADV7511_INT1_DDC_ERROR,
 | 
						|
				   ADV7511_INT1_DDC_ERROR);
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Per spec it is allowed to pulse the HPD signal to indicate that the
 | 
						|
	 * EDID information has changed. Some monitors do this when they wakeup
 | 
						|
	 * from standby or are enabled. When the HPD goes low the adv7511 is
 | 
						|
	 * reset and the outputs are disabled which might cause the monitor to
 | 
						|
	 * go to standby again. To avoid this we ignore the HPD pin for the
 | 
						|
	 * first few seconds after enabling the output.
 | 
						|
	 */
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
 | 
						|
			   ADV7511_REG_POWER2_HPD_SRC_MASK,
 | 
						|
			   ADV7511_REG_POWER2_HPD_SRC_NONE);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_power_on(struct adv7511 *adv7511)
 | 
						|
{
 | 
						|
	__adv7511_power_on(adv7511);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Most of the registers are reset during power down or when HPD is low.
 | 
						|
	 */
 | 
						|
	regcache_sync(adv7511->regmap);
 | 
						|
 | 
						|
	if (adv7511->type == ADV7533)
 | 
						|
		adv7533_dsi_power_on(adv7511);
 | 
						|
	adv7511->powered = true;
 | 
						|
}
 | 
						|
 | 
						|
static void __adv7511_power_off(struct adv7511 *adv7511)
 | 
						|
{
 | 
						|
	/* TODO: setup additional power down modes */
 | 
						|
	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 | 
						|
			   ADV7511_POWER_POWER_DOWN,
 | 
						|
			   ADV7511_POWER_POWER_DOWN);
 | 
						|
	regmap_update_bits(adv7511->regmap,
 | 
						|
			   ADV7511_REG_INT_ENABLE(1),
 | 
						|
			   ADV7511_INT1_DDC_ERROR, 0);
 | 
						|
	regcache_mark_dirty(adv7511->regmap);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_power_off(struct adv7511 *adv7511)
 | 
						|
{
 | 
						|
	__adv7511_power_off(adv7511);
 | 
						|
	if (adv7511->type == ADV7533)
 | 
						|
		adv7533_dsi_power_off(adv7511);
 | 
						|
	adv7511->powered = false;
 | 
						|
}
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * Interrupt and hotplug detection
 | 
						|
 */
 | 
						|
 | 
						|
static bool adv7511_hpd(struct adv7511 *adv7511)
 | 
						|
{
 | 
						|
	unsigned int irq0;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 | 
						|
	if (ret < 0)
 | 
						|
		return false;
 | 
						|
 | 
						|
	if (irq0 & ADV7511_INT0_HPD) {
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
 | 
						|
			     ADV7511_INT0_HPD);
 | 
						|
		return true;
 | 
						|
	}
 | 
						|
 | 
						|
	return false;
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_hpd_work(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work);
 | 
						|
	enum drm_connector_status status;
 | 
						|
	unsigned int val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
 | 
						|
	if (ret < 0)
 | 
						|
		status = connector_status_disconnected;
 | 
						|
	else if (val & ADV7511_STATUS_HPD)
 | 
						|
		status = connector_status_connected;
 | 
						|
	else
 | 
						|
		status = connector_status_disconnected;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The bridge resets its registers on unplug. So when we get a plug
 | 
						|
	 * event and we're already supposed to be powered, cycle the bridge to
 | 
						|
	 * restore its state.
 | 
						|
	 */
 | 
						|
	if (status == connector_status_connected &&
 | 
						|
	    adv7511->connector.status == connector_status_disconnected &&
 | 
						|
	    adv7511->powered) {
 | 
						|
		regcache_mark_dirty(adv7511->regmap);
 | 
						|
		adv7511_power_on(adv7511);
 | 
						|
	}
 | 
						|
 | 
						|
	if (adv7511->connector.status != status) {
 | 
						|
		adv7511->connector.status = status;
 | 
						|
		if (status == connector_status_disconnected)
 | 
						|
			cec_phys_addr_invalidate(adv7511->cec_adap);
 | 
						|
		drm_kms_helper_hotplug_event(adv7511->connector.dev);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 | 
						|
{
 | 
						|
	unsigned int irq0, irq1;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 | 
						|
 | 
						|
	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
 | 
						|
		schedule_work(&adv7511->hpd_work);
 | 
						|
 | 
						|
	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
 | 
						|
		adv7511->edid_read = true;
 | 
						|
 | 
						|
		if (adv7511->i2c_main->irq)
 | 
						|
			wake_up_all(&adv7511->wq);
 | 
						|
	}
 | 
						|
 | 
						|
#ifdef CONFIG_DRM_I2C_ADV7511_CEC
 | 
						|
	adv7511_cec_irq_process(adv7511, irq1);
 | 
						|
#endif
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t adv7511_irq_handler(int irq, void *devid)
 | 
						|
{
 | 
						|
	struct adv7511 *adv7511 = devid;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = adv7511_irq_process(adv7511, true);
 | 
						|
	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * EDID retrieval
 | 
						|
 */
 | 
						|
 | 
						|
static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (adv7511->i2c_main->irq) {
 | 
						|
		ret = wait_event_interruptible_timeout(adv7511->wq,
 | 
						|
				adv7511->edid_read, msecs_to_jiffies(timeout));
 | 
						|
	} else {
 | 
						|
		for (; timeout > 0; timeout -= 25) {
 | 
						|
			ret = adv7511_irq_process(adv7511, false);
 | 
						|
			if (ret < 0)
 | 
						|
				break;
 | 
						|
 | 
						|
			if (adv7511->edid_read)
 | 
						|
				break;
 | 
						|
 | 
						|
			msleep(25);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return adv7511->edid_read ? 0 : -EIO;
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
 | 
						|
				  size_t len)
 | 
						|
{
 | 
						|
	struct adv7511 *adv7511 = data;
 | 
						|
	struct i2c_msg xfer[2];
 | 
						|
	uint8_t offset;
 | 
						|
	unsigned int i;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (len > 128)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (adv7511->current_edid_segment != block / 2) {
 | 
						|
		unsigned int status;
 | 
						|
 | 
						|
		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
 | 
						|
				  &status);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		if (status != 2) {
 | 
						|
			adv7511->edid_read = false;
 | 
						|
			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
 | 
						|
				     block);
 | 
						|
			ret = adv7511_wait_for_edid(adv7511, 200);
 | 
						|
			if (ret < 0)
 | 
						|
				return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		/* Break this apart, hopefully more I2C controllers will
 | 
						|
		 * support 64 byte transfers than 256 byte transfers
 | 
						|
		 */
 | 
						|
 | 
						|
		xfer[0].addr = adv7511->i2c_edid->addr;
 | 
						|
		xfer[0].flags = 0;
 | 
						|
		xfer[0].len = 1;
 | 
						|
		xfer[0].buf = &offset;
 | 
						|
		xfer[1].addr = adv7511->i2c_edid->addr;
 | 
						|
		xfer[1].flags = I2C_M_RD;
 | 
						|
		xfer[1].len = 64;
 | 
						|
		xfer[1].buf = adv7511->edid_buf;
 | 
						|
 | 
						|
		offset = 0;
 | 
						|
 | 
						|
		for (i = 0; i < 4; ++i) {
 | 
						|
			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
 | 
						|
					   ARRAY_SIZE(xfer));
 | 
						|
			if (ret < 0)
 | 
						|
				return ret;
 | 
						|
			else if (ret != 2)
 | 
						|
				return -EIO;
 | 
						|
 | 
						|
			xfer[1].buf += 64;
 | 
						|
			offset += 64;
 | 
						|
		}
 | 
						|
 | 
						|
		adv7511->current_edid_segment = block / 2;
 | 
						|
	}
 | 
						|
 | 
						|
	if (block % 2 == 0)
 | 
						|
		memcpy(buf, adv7511->edid_buf, len);
 | 
						|
	else
 | 
						|
		memcpy(buf, adv7511->edid_buf + 128, len);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * ADV75xx helpers
 | 
						|
 */
 | 
						|
 | 
						|
static int adv7511_get_modes(struct adv7511 *adv7511,
 | 
						|
			     struct drm_connector *connector)
 | 
						|
{
 | 
						|
	struct edid *edid;
 | 
						|
	unsigned int count;
 | 
						|
 | 
						|
	/* Reading the EDID only works if the device is powered */
 | 
						|
	if (!adv7511->powered) {
 | 
						|
		unsigned int edid_i2c_addr =
 | 
						|
					(adv7511->i2c_edid->addr << 1);
 | 
						|
 | 
						|
		__adv7511_power_on(adv7511);
 | 
						|
 | 
						|
		/* Reset the EDID_I2C_ADDR register as it might be cleared */
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
 | 
						|
			     edid_i2c_addr);
 | 
						|
	}
 | 
						|
 | 
						|
	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
 | 
						|
 | 
						|
	if (!adv7511->powered)
 | 
						|
		__adv7511_power_off(adv7511);
 | 
						|
 | 
						|
 | 
						|
	drm_connector_update_edid_property(connector, edid);
 | 
						|
	count = drm_add_edid_modes(connector, edid);
 | 
						|
 | 
						|
	adv7511_set_config_csc(adv7511, connector, adv7511->rgb,
 | 
						|
			       drm_detect_hdmi_monitor(edid));
 | 
						|
 | 
						|
	cec_s_phys_addr_from_edid(adv7511->cec_adap, edid);
 | 
						|
 | 
						|
	kfree(edid);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static enum drm_connector_status
 | 
						|
adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
 | 
						|
{
 | 
						|
	enum drm_connector_status status;
 | 
						|
	unsigned int val;
 | 
						|
	bool hpd;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
 | 
						|
	if (ret < 0)
 | 
						|
		return connector_status_disconnected;
 | 
						|
 | 
						|
	if (val & ADV7511_STATUS_HPD)
 | 
						|
		status = connector_status_connected;
 | 
						|
	else
 | 
						|
		status = connector_status_disconnected;
 | 
						|
 | 
						|
	hpd = adv7511_hpd(adv7511);
 | 
						|
 | 
						|
	/* The chip resets itself when the cable is disconnected, so in case
 | 
						|
	 * there is a pending HPD interrupt and the cable is connected there was
 | 
						|
	 * at least one transition from disconnected to connected and the chip
 | 
						|
	 * has to be reinitialized. */
 | 
						|
	if (status == connector_status_connected && hpd && adv7511->powered) {
 | 
						|
		regcache_mark_dirty(adv7511->regmap);
 | 
						|
		adv7511_power_on(adv7511);
 | 
						|
		adv7511_get_modes(adv7511, connector);
 | 
						|
		if (adv7511->status == connector_status_connected)
 | 
						|
			status = connector_status_disconnected;
 | 
						|
	} else {
 | 
						|
		/* Renable HPD sensing */
 | 
						|
		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
 | 
						|
				   ADV7511_REG_POWER2_HPD_SRC_MASK,
 | 
						|
				   ADV7511_REG_POWER2_HPD_SRC_BOTH);
 | 
						|
	}
 | 
						|
 | 
						|
	adv7511->status = status;
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
static enum drm_mode_status adv7511_mode_valid(struct adv7511 *adv7511,
 | 
						|
			      struct drm_display_mode *mode)
 | 
						|
{
 | 
						|
	if (mode->clock > 165000)
 | 
						|
		return MODE_CLOCK_HIGH;
 | 
						|
 | 
						|
	return MODE_OK;
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_mode_set(struct adv7511 *adv7511,
 | 
						|
			     const struct drm_display_mode *mode,
 | 
						|
			     const struct drm_display_mode *adj_mode)
 | 
						|
{
 | 
						|
	unsigned int low_refresh_rate;
 | 
						|
	unsigned int hsync_polarity = 0;
 | 
						|
	unsigned int vsync_polarity = 0;
 | 
						|
 | 
						|
	if (adv7511->embedded_sync) {
 | 
						|
		unsigned int hsync_offset, hsync_len;
 | 
						|
		unsigned int vsync_offset, vsync_len;
 | 
						|
 | 
						|
		hsync_offset = adj_mode->crtc_hsync_start -
 | 
						|
			       adj_mode->crtc_hdisplay;
 | 
						|
		vsync_offset = adj_mode->crtc_vsync_start -
 | 
						|
			       adj_mode->crtc_vdisplay;
 | 
						|
		hsync_len = adj_mode->crtc_hsync_end -
 | 
						|
			    adj_mode->crtc_hsync_start;
 | 
						|
		vsync_len = adj_mode->crtc_vsync_end -
 | 
						|
			    adj_mode->crtc_vsync_start;
 | 
						|
 | 
						|
		/* The hardware vsync generator has a off-by-one bug */
 | 
						|
		vsync_offset += 1;
 | 
						|
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
 | 
						|
			     ((hsync_offset >> 10) & 0x7) << 5);
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
 | 
						|
			     (hsync_offset >> 2) & 0xff);
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
 | 
						|
			     ((hsync_offset & 0x3) << 6) |
 | 
						|
			     ((hsync_len >> 4) & 0x3f));
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
 | 
						|
			     ((hsync_len & 0xf) << 4) |
 | 
						|
			     ((vsync_offset >> 6) & 0xf));
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
 | 
						|
			     ((vsync_offset & 0x3f) << 2) |
 | 
						|
			     ((vsync_len >> 8) & 0x3));
 | 
						|
		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
 | 
						|
			     vsync_len & 0xff);
 | 
						|
 | 
						|
		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
 | 
						|
		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
 | 
						|
	} else {
 | 
						|
		enum adv7511_sync_polarity mode_hsync_polarity;
 | 
						|
		enum adv7511_sync_polarity mode_vsync_polarity;
 | 
						|
 | 
						|
		/**
 | 
						|
		 * If the input signal is always low or always high we want to
 | 
						|
		 * invert or let it passthrough depending on the polarity of the
 | 
						|
		 * current mode.
 | 
						|
		 **/
 | 
						|
		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
 | 
						|
			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
 | 
						|
		else
 | 
						|
			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
 | 
						|
 | 
						|
		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
 | 
						|
			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
 | 
						|
		else
 | 
						|
			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
 | 
						|
 | 
						|
		if (adv7511->hsync_polarity != mode_hsync_polarity &&
 | 
						|
		    adv7511->hsync_polarity !=
 | 
						|
		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
 | 
						|
			hsync_polarity = 1;
 | 
						|
 | 
						|
		if (adv7511->vsync_polarity != mode_vsync_polarity &&
 | 
						|
		    adv7511->vsync_polarity !=
 | 
						|
		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
 | 
						|
			vsync_polarity = 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (drm_mode_vrefresh(mode) <= 24)
 | 
						|
		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
 | 
						|
	else if (drm_mode_vrefresh(mode) <= 25)
 | 
						|
		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
 | 
						|
	else if (drm_mode_vrefresh(mode) <= 30)
 | 
						|
		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 | 
						|
	else
 | 
						|
		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
 | 
						|
 | 
						|
	regmap_update_bits(adv7511->regmap, 0xfb,
 | 
						|
		0x6, low_refresh_rate << 1);
 | 
						|
	regmap_update_bits(adv7511->regmap, 0x17,
 | 
						|
		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 | 
						|
 | 
						|
	if (adv7511->type == ADV7533)
 | 
						|
		adv7533_mode_set(adv7511, adj_mode);
 | 
						|
 | 
						|
	drm_mode_copy(&adv7511->curr_mode, adj_mode);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
 | 
						|
	 * supposed to give better results.
 | 
						|
	 */
 | 
						|
 | 
						|
	adv7511->f_tmds = mode->clock;
 | 
						|
}
 | 
						|
 | 
						|
/* Connector funcs */
 | 
						|
static struct adv7511 *connector_to_adv7511(struct drm_connector *connector)
 | 
						|
{
 | 
						|
	return container_of(connector, struct adv7511, connector);
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_connector_get_modes(struct drm_connector *connector)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = connector_to_adv7511(connector);
 | 
						|
 | 
						|
	return adv7511_get_modes(adv, connector);
 | 
						|
}
 | 
						|
 | 
						|
static enum drm_mode_status
 | 
						|
adv7511_connector_mode_valid(struct drm_connector *connector,
 | 
						|
			     struct drm_display_mode *mode)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = connector_to_adv7511(connector);
 | 
						|
 | 
						|
	return adv7511_mode_valid(adv, mode);
 | 
						|
}
 | 
						|
 | 
						|
static struct drm_connector_helper_funcs adv7511_connector_helper_funcs = {
 | 
						|
	.get_modes = adv7511_connector_get_modes,
 | 
						|
	.mode_valid = adv7511_connector_mode_valid,
 | 
						|
};
 | 
						|
 | 
						|
static enum drm_connector_status
 | 
						|
adv7511_connector_detect(struct drm_connector *connector, bool force)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = connector_to_adv7511(connector);
 | 
						|
 | 
						|
	return adv7511_detect(adv, connector);
 | 
						|
}
 | 
						|
 | 
						|
static const struct drm_connector_funcs adv7511_connector_funcs = {
 | 
						|
	.fill_modes = drm_helper_probe_single_connector_modes,
 | 
						|
	.detect = adv7511_connector_detect,
 | 
						|
	.destroy = drm_connector_cleanup,
 | 
						|
	.reset = drm_atomic_helper_connector_reset,
 | 
						|
	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 | 
						|
	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 | 
						|
};
 | 
						|
 | 
						|
/* Bridge funcs */
 | 
						|
static struct adv7511 *bridge_to_adv7511(struct drm_bridge *bridge)
 | 
						|
{
 | 
						|
	return container_of(bridge, struct adv7511, bridge);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_bridge_enable(struct drm_bridge *bridge)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = bridge_to_adv7511(bridge);
 | 
						|
 | 
						|
	adv7511_power_on(adv);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_bridge_disable(struct drm_bridge *bridge)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = bridge_to_adv7511(bridge);
 | 
						|
 | 
						|
	adv7511_power_off(adv);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
 | 
						|
				    const struct drm_display_mode *mode,
 | 
						|
				    const struct drm_display_mode *adj_mode)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = bridge_to_adv7511(bridge);
 | 
						|
 | 
						|
	adv7511_mode_set(adv, mode, adj_mode);
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_bridge_attach(struct drm_bridge *bridge)
 | 
						|
{
 | 
						|
	struct adv7511 *adv = bridge_to_adv7511(bridge);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!bridge->encoder) {
 | 
						|
		DRM_ERROR("Parent encoder object not found");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	if (adv->i2c_main->irq)
 | 
						|
		adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
 | 
						|
	else
 | 
						|
		adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
 | 
						|
				DRM_CONNECTOR_POLL_DISCONNECT;
 | 
						|
 | 
						|
	ret = drm_connector_init(bridge->dev, &adv->connector,
 | 
						|
				 &adv7511_connector_funcs,
 | 
						|
				 DRM_MODE_CONNECTOR_HDMIA);
 | 
						|
	if (ret) {
 | 
						|
		DRM_ERROR("Failed to initialize connector with drm\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
	drm_connector_helper_add(&adv->connector,
 | 
						|
				 &adv7511_connector_helper_funcs);
 | 
						|
	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
 | 
						|
 | 
						|
	if (adv->type == ADV7533)
 | 
						|
		ret = adv7533_attach_dsi(adv);
 | 
						|
 | 
						|
	if (adv->i2c_main->irq)
 | 
						|
		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
 | 
						|
			     ADV7511_INT0_HPD);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct drm_bridge_funcs adv7511_bridge_funcs = {
 | 
						|
	.enable = adv7511_bridge_enable,
 | 
						|
	.disable = adv7511_bridge_disable,
 | 
						|
	.mode_set = adv7511_bridge_mode_set,
 | 
						|
	.attach = adv7511_bridge_attach,
 | 
						|
};
 | 
						|
 | 
						|
/* -----------------------------------------------------------------------------
 | 
						|
 * Probe & remove
 | 
						|
 */
 | 
						|
 | 
						|
static const char * const adv7511_supply_names[] = {
 | 
						|
	"avdd",
 | 
						|
	"dvdd",
 | 
						|
	"pvdd",
 | 
						|
	"bgvdd",
 | 
						|
	"dvdd-3v",
 | 
						|
};
 | 
						|
 | 
						|
static const char * const adv7533_supply_names[] = {
 | 
						|
	"avdd",
 | 
						|
	"dvdd",
 | 
						|
	"pvdd",
 | 
						|
	"a2vdd",
 | 
						|
	"v3p3",
 | 
						|
	"v1p2",
 | 
						|
};
 | 
						|
 | 
						|
static int adv7511_init_regulators(struct adv7511 *adv)
 | 
						|
{
 | 
						|
	struct device *dev = &adv->i2c_main->dev;
 | 
						|
	const char * const *supply_names;
 | 
						|
	unsigned int i;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (adv->type == ADV7511) {
 | 
						|
		supply_names = adv7511_supply_names;
 | 
						|
		adv->num_supplies = ARRAY_SIZE(adv7511_supply_names);
 | 
						|
	} else {
 | 
						|
		supply_names = adv7533_supply_names;
 | 
						|
		adv->num_supplies = ARRAY_SIZE(adv7533_supply_names);
 | 
						|
	}
 | 
						|
 | 
						|
	adv->supplies = devm_kcalloc(dev, adv->num_supplies,
 | 
						|
				     sizeof(*adv->supplies), GFP_KERNEL);
 | 
						|
	if (!adv->supplies)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	for (i = 0; i < adv->num_supplies; i++)
 | 
						|
		adv->supplies[i].supply = supply_names[i];
 | 
						|
 | 
						|
	ret = devm_regulator_bulk_get(dev, adv->num_supplies, adv->supplies);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return regulator_bulk_enable(adv->num_supplies, adv->supplies);
 | 
						|
}
 | 
						|
 | 
						|
static void adv7511_uninit_regulators(struct adv7511 *adv)
 | 
						|
{
 | 
						|
	regulator_bulk_disable(adv->num_supplies, adv->supplies);
 | 
						|
}
 | 
						|
 | 
						|
static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
 | 
						|
{
 | 
						|
	struct i2c_client *i2c = to_i2c_client(dev);
 | 
						|
	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 | 
						|
 | 
						|
	if (adv7511->type == ADV7533)
 | 
						|
		reg -= ADV7533_REG_CEC_OFFSET;
 | 
						|
 | 
						|
	switch (reg) {
 | 
						|
	case ADV7511_REG_CEC_RX_FRAME_HDR:
 | 
						|
	case ADV7511_REG_CEC_RX_FRAME_DATA0...
 | 
						|
		ADV7511_REG_CEC_RX_FRAME_DATA0 + 14:
 | 
						|
	case ADV7511_REG_CEC_RX_FRAME_LEN:
 | 
						|
	case ADV7511_REG_CEC_RX_BUFFERS:
 | 
						|
	case ADV7511_REG_CEC_TX_LOW_DRV_CNT:
 | 
						|
		return true;
 | 
						|
	}
 | 
						|
 | 
						|
	return false;
 | 
						|
}
 | 
						|
 | 
						|
static const struct regmap_config adv7511_cec_regmap_config = {
 | 
						|
	.reg_bits = 8,
 | 
						|
	.val_bits = 8,
 | 
						|
 | 
						|
	.max_register = 0xff,
 | 
						|
	.cache_type = REGCACHE_RBTREE,
 | 
						|
	.volatile_reg = adv7511_cec_register_volatile,
 | 
						|
};
 | 
						|
 | 
						|
static int adv7511_init_cec_regmap(struct adv7511 *adv)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	adv->i2c_cec = i2c_new_ancillary_device(adv->i2c_main, "cec",
 | 
						|
						ADV7511_CEC_I2C_ADDR_DEFAULT);
 | 
						|
	if (IS_ERR(adv->i2c_cec))
 | 
						|
		return PTR_ERR(adv->i2c_cec);
 | 
						|
	i2c_set_clientdata(adv->i2c_cec, adv);
 | 
						|
 | 
						|
	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
 | 
						|
					&adv7511_cec_regmap_config);
 | 
						|
	if (IS_ERR(adv->regmap_cec)) {
 | 
						|
		ret = PTR_ERR(adv->regmap_cec);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	if (adv->type == ADV7533) {
 | 
						|
		ret = adv7533_patch_cec_registers(adv);
 | 
						|
		if (ret)
 | 
						|
			goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
err:
 | 
						|
	i2c_unregister_device(adv->i2c_cec);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_parse_dt(struct device_node *np,
 | 
						|
			    struct adv7511_link_config *config)
 | 
						|
{
 | 
						|
	const char *str;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
 | 
						|
	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
 | 
						|
	    config->input_color_depth != 12)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	ret = of_property_read_string(np, "adi,input-colorspace", &str);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (!strcmp(str, "rgb"))
 | 
						|
		config->input_colorspace = HDMI_COLORSPACE_RGB;
 | 
						|
	else if (!strcmp(str, "yuv422"))
 | 
						|
		config->input_colorspace = HDMI_COLORSPACE_YUV422;
 | 
						|
	else if (!strcmp(str, "yuv444"))
 | 
						|
		config->input_colorspace = HDMI_COLORSPACE_YUV444;
 | 
						|
	else
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	ret = of_property_read_string(np, "adi,input-clock", &str);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (!strcmp(str, "1x"))
 | 
						|
		config->input_clock = ADV7511_INPUT_CLOCK_1X;
 | 
						|
	else if (!strcmp(str, "2x"))
 | 
						|
		config->input_clock = ADV7511_INPUT_CLOCK_2X;
 | 
						|
	else if (!strcmp(str, "ddr"))
 | 
						|
		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
 | 
						|
	else
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
 | 
						|
	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
 | 
						|
		ret = of_property_read_u32(np, "adi,input-style",
 | 
						|
					   &config->input_style);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		if (config->input_style < 1 || config->input_style > 3)
 | 
						|
			return -EINVAL;
 | 
						|
 | 
						|
		ret = of_property_read_string(np, "adi,input-justification",
 | 
						|
					      &str);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		if (!strcmp(str, "left"))
 | 
						|
			config->input_justification =
 | 
						|
				ADV7511_INPUT_JUSTIFICATION_LEFT;
 | 
						|
		else if (!strcmp(str, "evenly"))
 | 
						|
			config->input_justification =
 | 
						|
				ADV7511_INPUT_JUSTIFICATION_EVENLY;
 | 
						|
		else if (!strcmp(str, "right"))
 | 
						|
			config->input_justification =
 | 
						|
				ADV7511_INPUT_JUSTIFICATION_RIGHT;
 | 
						|
		else
 | 
						|
			return -EINVAL;
 | 
						|
 | 
						|
	} else {
 | 
						|
		config->input_style = 1;
 | 
						|
		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
 | 
						|
	}
 | 
						|
 | 
						|
	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
 | 
						|
	if (config->clock_delay < -1200 || config->clock_delay > 1600)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
 | 
						|
 | 
						|
	/* Hardcode the sync pulse configurations for now. */
 | 
						|
	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
 | 
						|
	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
 | 
						|
	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 | 
						|
{
 | 
						|
	struct adv7511_link_config link_config;
 | 
						|
	struct adv7511 *adv7511;
 | 
						|
	struct device *dev = &i2c->dev;
 | 
						|
	unsigned int val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!dev->of_node)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
 | 
						|
	if (!adv7511)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	adv7511->i2c_main = i2c;
 | 
						|
	adv7511->powered = false;
 | 
						|
	adv7511->status = connector_status_disconnected;
 | 
						|
 | 
						|
	if (dev->of_node)
 | 
						|
		adv7511->type = (enum adv7511_type)of_device_get_match_data(dev);
 | 
						|
	else
 | 
						|
		adv7511->type = id->driver_data;
 | 
						|
 | 
						|
	memset(&link_config, 0, sizeof(link_config));
 | 
						|
 | 
						|
	if (adv7511->type == ADV7511)
 | 
						|
		ret = adv7511_parse_dt(dev->of_node, &link_config);
 | 
						|
	else
 | 
						|
		ret = adv7533_parse_dt(dev->of_node, adv7511);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = adv7511_init_regulators(adv7511);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "failed to init regulators\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The power down GPIO is optional. If present, toggle it from active to
 | 
						|
	 * inactive to wake up the encoder.
 | 
						|
	 */
 | 
						|
	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
 | 
						|
	if (IS_ERR(adv7511->gpio_pd)) {
 | 
						|
		ret = PTR_ERR(adv7511->gpio_pd);
 | 
						|
		goto uninit_regulators;
 | 
						|
	}
 | 
						|
 | 
						|
	if (adv7511->gpio_pd) {
 | 
						|
		usleep_range(5000, 6000);
 | 
						|
		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
 | 
						|
	if (IS_ERR(adv7511->regmap)) {
 | 
						|
		ret = PTR_ERR(adv7511->regmap);
 | 
						|
		goto uninit_regulators;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
 | 
						|
	if (ret)
 | 
						|
		goto uninit_regulators;
 | 
						|
	dev_dbg(dev, "Rev. %d\n", val);
 | 
						|
 | 
						|
	if (adv7511->type == ADV7511)
 | 
						|
		ret = regmap_register_patch(adv7511->regmap,
 | 
						|
					    adv7511_fixed_registers,
 | 
						|
					    ARRAY_SIZE(adv7511_fixed_registers));
 | 
						|
	else
 | 
						|
		ret = adv7533_patch_registers(adv7511);
 | 
						|
	if (ret)
 | 
						|
		goto uninit_regulators;
 | 
						|
 | 
						|
	adv7511_packet_disable(adv7511, 0xffff);
 | 
						|
 | 
						|
	adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid",
 | 
						|
					ADV7511_EDID_I2C_ADDR_DEFAULT);
 | 
						|
	if (IS_ERR(adv7511->i2c_edid)) {
 | 
						|
		ret = PTR_ERR(adv7511->i2c_edid);
 | 
						|
		goto uninit_regulators;
 | 
						|
	}
 | 
						|
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
 | 
						|
		     adv7511->i2c_edid->addr << 1);
 | 
						|
 | 
						|
	adv7511->i2c_packet = i2c_new_ancillary_device(i2c, "packet",
 | 
						|
					ADV7511_PACKET_I2C_ADDR_DEFAULT);
 | 
						|
	if (IS_ERR(adv7511->i2c_packet)) {
 | 
						|
		ret = PTR_ERR(adv7511->i2c_packet);
 | 
						|
		goto err_i2c_unregister_edid;
 | 
						|
	}
 | 
						|
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
 | 
						|
		     adv7511->i2c_packet->addr << 1);
 | 
						|
 | 
						|
	ret = adv7511_init_cec_regmap(adv7511);
 | 
						|
	if (ret)
 | 
						|
		goto err_i2c_unregister_packet;
 | 
						|
 | 
						|
	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
 | 
						|
		     adv7511->i2c_cec->addr << 1);
 | 
						|
 | 
						|
	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 | 
						|
 | 
						|
	if (i2c->irq) {
 | 
						|
		init_waitqueue_head(&adv7511->wq);
 | 
						|
 | 
						|
		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
 | 
						|
						adv7511_irq_handler,
 | 
						|
						IRQF_ONESHOT, dev_name(dev),
 | 
						|
						adv7511);
 | 
						|
		if (ret)
 | 
						|
			goto err_unregister_cec;
 | 
						|
	}
 | 
						|
 | 
						|
	adv7511_power_off(adv7511);
 | 
						|
 | 
						|
	i2c_set_clientdata(i2c, adv7511);
 | 
						|
 | 
						|
	if (adv7511->type == ADV7511)
 | 
						|
		adv7511_set_link_config(adv7511, &link_config);
 | 
						|
 | 
						|
	ret = adv7511_cec_init(dev, adv7511);
 | 
						|
	if (ret)
 | 
						|
		goto err_unregister_cec;
 | 
						|
 | 
						|
	adv7511->bridge.funcs = &adv7511_bridge_funcs;
 | 
						|
	adv7511->bridge.of_node = dev->of_node;
 | 
						|
 | 
						|
	drm_bridge_add(&adv7511->bridge);
 | 
						|
 | 
						|
	adv7511_audio_init(dev, adv7511);
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_unregister_cec:
 | 
						|
	i2c_unregister_device(adv7511->i2c_cec);
 | 
						|
	if (adv7511->cec_clk)
 | 
						|
		clk_disable_unprepare(adv7511->cec_clk);
 | 
						|
err_i2c_unregister_packet:
 | 
						|
	i2c_unregister_device(adv7511->i2c_packet);
 | 
						|
err_i2c_unregister_edid:
 | 
						|
	i2c_unregister_device(adv7511->i2c_edid);
 | 
						|
uninit_regulators:
 | 
						|
	adv7511_uninit_regulators(adv7511);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int adv7511_remove(struct i2c_client *i2c)
 | 
						|
{
 | 
						|
	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 | 
						|
 | 
						|
	if (adv7511->type == ADV7533)
 | 
						|
		adv7533_detach_dsi(adv7511);
 | 
						|
	i2c_unregister_device(adv7511->i2c_cec);
 | 
						|
	if (adv7511->cec_clk)
 | 
						|
		clk_disable_unprepare(adv7511->cec_clk);
 | 
						|
 | 
						|
	adv7511_uninit_regulators(adv7511);
 | 
						|
 | 
						|
	drm_bridge_remove(&adv7511->bridge);
 | 
						|
 | 
						|
	adv7511_audio_exit(adv7511);
 | 
						|
 | 
						|
	cec_unregister_adapter(adv7511->cec_adap);
 | 
						|
 | 
						|
	i2c_unregister_device(adv7511->i2c_packet);
 | 
						|
	i2c_unregister_device(adv7511->i2c_edid);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct i2c_device_id adv7511_i2c_ids[] = {
 | 
						|
	{ "adv7511", ADV7511 },
 | 
						|
	{ "adv7511w", ADV7511 },
 | 
						|
	{ "adv7513", ADV7511 },
 | 
						|
#ifdef CONFIG_DRM_I2C_ADV7533
 | 
						|
	{ "adv7533", ADV7533 },
 | 
						|
#endif
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
 | 
						|
 | 
						|
static const struct of_device_id adv7511_of_ids[] = {
 | 
						|
	{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
 | 
						|
	{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
 | 
						|
	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
 | 
						|
#ifdef CONFIG_DRM_I2C_ADV7533
 | 
						|
	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
 | 
						|
#endif
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, adv7511_of_ids);
 | 
						|
 | 
						|
static struct mipi_dsi_driver adv7533_dsi_driver = {
 | 
						|
	.driver.name = "adv7533",
 | 
						|
};
 | 
						|
 | 
						|
static struct i2c_driver adv7511_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name = "adv7511",
 | 
						|
		.of_match_table = adv7511_of_ids,
 | 
						|
	},
 | 
						|
	.id_table = adv7511_i2c_ids,
 | 
						|
	.probe = adv7511_probe,
 | 
						|
	.remove = adv7511_remove,
 | 
						|
};
 | 
						|
 | 
						|
static int __init adv7511_init(void)
 | 
						|
{
 | 
						|
	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
 | 
						|
		mipi_dsi_driver_register(&adv7533_dsi_driver);
 | 
						|
 | 
						|
	return i2c_add_driver(&adv7511_driver);
 | 
						|
}
 | 
						|
module_init(adv7511_init);
 | 
						|
 | 
						|
static void __exit adv7511_exit(void)
 | 
						|
{
 | 
						|
	i2c_del_driver(&adv7511_driver);
 | 
						|
 | 
						|
	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
 | 
						|
		mipi_dsi_driver_unregister(&adv7533_dsi_driver);
 | 
						|
}
 | 
						|
module_exit(adv7511_exit);
 | 
						|
 | 
						|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 | 
						|
MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
 | 
						|
MODULE_LICENSE("GPL");
 |