forked from mirrors/linux
		
	The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit0394a63acf("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes:6b93fb4648("net-next: dsa: add new driver for qca8xxx family") Fixes:a0c02161ec("net: dsa: variable number of ports") Fixes:0394a63acf("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			1162 lines
		
	
	
	
		
			28 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1162 lines
		
	
	
	
		
			28 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0
 | 
						|
/*
 | 
						|
 * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
 | 
						|
 * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
 | 
						|
 * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
 | 
						|
 * Copyright (c) 2016 John Crispin <john@phrozen.org>
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/phy.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <net/dsa.h>
 | 
						|
#include <linux/of_net.h>
 | 
						|
#include <linux/of_platform.h>
 | 
						|
#include <linux/if_bridge.h>
 | 
						|
#include <linux/mdio.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/etherdevice.h>
 | 
						|
 | 
						|
#include "qca8k.h"
 | 
						|
 | 
						|
#define MIB_DESC(_s, _o, _n)	\
 | 
						|
	{			\
 | 
						|
		.size = (_s),	\
 | 
						|
		.offset = (_o),	\
 | 
						|
		.name = (_n),	\
 | 
						|
	}
 | 
						|
 | 
						|
static const struct qca8k_mib_desc ar8327_mib[] = {
 | 
						|
	MIB_DESC(1, 0x00, "RxBroad"),
 | 
						|
	MIB_DESC(1, 0x04, "RxPause"),
 | 
						|
	MIB_DESC(1, 0x08, "RxMulti"),
 | 
						|
	MIB_DESC(1, 0x0c, "RxFcsErr"),
 | 
						|
	MIB_DESC(1, 0x10, "RxAlignErr"),
 | 
						|
	MIB_DESC(1, 0x14, "RxRunt"),
 | 
						|
	MIB_DESC(1, 0x18, "RxFragment"),
 | 
						|
	MIB_DESC(1, 0x1c, "Rx64Byte"),
 | 
						|
	MIB_DESC(1, 0x20, "Rx128Byte"),
 | 
						|
	MIB_DESC(1, 0x24, "Rx256Byte"),
 | 
						|
	MIB_DESC(1, 0x28, "Rx512Byte"),
 | 
						|
	MIB_DESC(1, 0x2c, "Rx1024Byte"),
 | 
						|
	MIB_DESC(1, 0x30, "Rx1518Byte"),
 | 
						|
	MIB_DESC(1, 0x34, "RxMaxByte"),
 | 
						|
	MIB_DESC(1, 0x38, "RxTooLong"),
 | 
						|
	MIB_DESC(2, 0x3c, "RxGoodByte"),
 | 
						|
	MIB_DESC(2, 0x44, "RxBadByte"),
 | 
						|
	MIB_DESC(1, 0x4c, "RxOverFlow"),
 | 
						|
	MIB_DESC(1, 0x50, "Filtered"),
 | 
						|
	MIB_DESC(1, 0x54, "TxBroad"),
 | 
						|
	MIB_DESC(1, 0x58, "TxPause"),
 | 
						|
	MIB_DESC(1, 0x5c, "TxMulti"),
 | 
						|
	MIB_DESC(1, 0x60, "TxUnderRun"),
 | 
						|
	MIB_DESC(1, 0x64, "Tx64Byte"),
 | 
						|
	MIB_DESC(1, 0x68, "Tx128Byte"),
 | 
						|
	MIB_DESC(1, 0x6c, "Tx256Byte"),
 | 
						|
	MIB_DESC(1, 0x70, "Tx512Byte"),
 | 
						|
	MIB_DESC(1, 0x74, "Tx1024Byte"),
 | 
						|
	MIB_DESC(1, 0x78, "Tx1518Byte"),
 | 
						|
	MIB_DESC(1, 0x7c, "TxMaxByte"),
 | 
						|
	MIB_DESC(1, 0x80, "TxOverSize"),
 | 
						|
	MIB_DESC(2, 0x84, "TxByte"),
 | 
						|
	MIB_DESC(1, 0x8c, "TxCollision"),
 | 
						|
	MIB_DESC(1, 0x90, "TxAbortCol"),
 | 
						|
	MIB_DESC(1, 0x94, "TxMultiCol"),
 | 
						|
	MIB_DESC(1, 0x98, "TxSingleCol"),
 | 
						|
	MIB_DESC(1, 0x9c, "TxExcDefer"),
 | 
						|
	MIB_DESC(1, 0xa0, "TxDefer"),
 | 
						|
	MIB_DESC(1, 0xa4, "TxLateCol"),
 | 
						|
};
 | 
						|
 | 
						|
/* The 32bit switch registers are accessed indirectly. To achieve this we need
 | 
						|
 * to set the page of the register. Track the last page that was set to reduce
 | 
						|
 * mdio writes
 | 
						|
 */
 | 
						|
static u16 qca8k_current_page = 0xffff;
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
 | 
						|
{
 | 
						|
	regaddr >>= 1;
 | 
						|
	*r1 = regaddr & 0x1e;
 | 
						|
 | 
						|
	regaddr >>= 5;
 | 
						|
	*r2 = regaddr & 0x7;
 | 
						|
 | 
						|
	regaddr >>= 3;
 | 
						|
	*page = regaddr & 0x3ff;
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = bus->read(bus, phy_id, regnum);
 | 
						|
	if (ret >= 0) {
 | 
						|
		val = ret;
 | 
						|
		ret = bus->read(bus, phy_id, regnum + 1);
 | 
						|
		val |= ret << 16;
 | 
						|
	}
 | 
						|
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err_ratelimited(&bus->dev,
 | 
						|
				    "failed to read qca8k 32bit register\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
 | 
						|
{
 | 
						|
	u16 lo, hi;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	lo = val & 0xffff;
 | 
						|
	hi = (u16)(val >> 16);
 | 
						|
 | 
						|
	ret = bus->write(bus, phy_id, regnum, lo);
 | 
						|
	if (ret >= 0)
 | 
						|
		ret = bus->write(bus, phy_id, regnum + 1, hi);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_err_ratelimited(&bus->dev,
 | 
						|
				    "failed to write qca8k 32bit register\n");
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_set_page(struct mii_bus *bus, u16 page)
 | 
						|
{
 | 
						|
	if (page == qca8k_current_page)
 | 
						|
		return;
 | 
						|
 | 
						|
	if (bus->write(bus, 0x18, 0, page) < 0)
 | 
						|
		dev_err_ratelimited(&bus->dev,
 | 
						|
				    "failed to set qca8k page\n");
 | 
						|
	qca8k_current_page = page;
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
qca8k_read(struct qca8k_priv *priv, u32 reg)
 | 
						|
{
 | 
						|
	u16 r1, r2, page;
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	qca8k_split_addr(reg, &r1, &r2, &page);
 | 
						|
 | 
						|
	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
 | 
						|
 | 
						|
	qca8k_set_page(priv->bus, page);
 | 
						|
	val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
 | 
						|
 | 
						|
	mutex_unlock(&priv->bus->mdio_lock);
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
 | 
						|
{
 | 
						|
	u16 r1, r2, page;
 | 
						|
 | 
						|
	qca8k_split_addr(reg, &r1, &r2, &page);
 | 
						|
 | 
						|
	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
 | 
						|
 | 
						|
	qca8k_set_page(priv->bus, page);
 | 
						|
	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
 | 
						|
 | 
						|
	mutex_unlock(&priv->bus->mdio_lock);
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
 | 
						|
{
 | 
						|
	u16 r1, r2, page;
 | 
						|
	u32 ret;
 | 
						|
 | 
						|
	qca8k_split_addr(reg, &r1, &r2, &page);
 | 
						|
 | 
						|
	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
 | 
						|
 | 
						|
	qca8k_set_page(priv->bus, page);
 | 
						|
	ret = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
 | 
						|
	ret &= ~mask;
 | 
						|
	ret |= val;
 | 
						|
	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, ret);
 | 
						|
 | 
						|
	mutex_unlock(&priv->bus->mdio_lock);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
 | 
						|
{
 | 
						|
	qca8k_rmw(priv, reg, 0, val);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
 | 
						|
{
 | 
						|
	qca8k_rmw(priv, reg, val, 0);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
 | 
						|
 | 
						|
	*val = qca8k_read(priv, reg);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
 | 
						|
 | 
						|
	qca8k_write(priv, reg, val);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct regmap_range qca8k_readable_ranges[] = {
 | 
						|
	regmap_reg_range(0x0000, 0x00e4), /* Global control */
 | 
						|
	regmap_reg_range(0x0100, 0x0168), /* EEE control */
 | 
						|
	regmap_reg_range(0x0200, 0x0270), /* Parser control */
 | 
						|
	regmap_reg_range(0x0400, 0x0454), /* ACL */
 | 
						|
	regmap_reg_range(0x0600, 0x0718), /* Lookup */
 | 
						|
	regmap_reg_range(0x0800, 0x0b70), /* QM */
 | 
						|
	regmap_reg_range(0x0c00, 0x0c80), /* PKT */
 | 
						|
	regmap_reg_range(0x0e00, 0x0e98), /* L3 */
 | 
						|
	regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
 | 
						|
	regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
 | 
						|
	regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
 | 
						|
	regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
 | 
						|
	regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
 | 
						|
	regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
 | 
						|
	regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
 | 
						|
 | 
						|
};
 | 
						|
 | 
						|
static const struct regmap_access_table qca8k_readable_table = {
 | 
						|
	.yes_ranges = qca8k_readable_ranges,
 | 
						|
	.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
 | 
						|
};
 | 
						|
 | 
						|
static struct regmap_config qca8k_regmap_config = {
 | 
						|
	.reg_bits = 16,
 | 
						|
	.val_bits = 32,
 | 
						|
	.reg_stride = 4,
 | 
						|
	.max_register = 0x16ac, /* end MIB - Port6 range */
 | 
						|
	.reg_read = qca8k_regmap_read,
 | 
						|
	.reg_write = qca8k_regmap_write,
 | 
						|
	.rd_table = &qca8k_readable_table,
 | 
						|
};
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
 | 
						|
{
 | 
						|
	unsigned long timeout;
 | 
						|
 | 
						|
	timeout = jiffies + msecs_to_jiffies(20);
 | 
						|
 | 
						|
	/* loop until the busy flag has cleared */
 | 
						|
	do {
 | 
						|
		u32 val = qca8k_read(priv, reg);
 | 
						|
		int busy = val & mask;
 | 
						|
 | 
						|
		if (!busy)
 | 
						|
			break;
 | 
						|
		cond_resched();
 | 
						|
	} while (!time_after_eq(jiffies, timeout));
 | 
						|
 | 
						|
	return time_after_eq(jiffies, timeout);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
 | 
						|
{
 | 
						|
	u32 reg[4];
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* load the ARL table into an array */
 | 
						|
	for (i = 0; i < 4; i++)
 | 
						|
		reg[i] = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
 | 
						|
 | 
						|
	/* vid - 83:72 */
 | 
						|
	fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
 | 
						|
	/* aging - 67:64 */
 | 
						|
	fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
 | 
						|
	/* portmask - 54:48 */
 | 
						|
	fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
 | 
						|
	/* mac - 47:0 */
 | 
						|
	fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
 | 
						|
	fdb->mac[1] = reg[1] & 0xff;
 | 
						|
	fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
 | 
						|
	fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
 | 
						|
	fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
 | 
						|
	fdb->mac[5] = reg[0] & 0xff;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
 | 
						|
		u8 aging)
 | 
						|
{
 | 
						|
	u32 reg[3] = { 0 };
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* vid - 83:72 */
 | 
						|
	reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
 | 
						|
	/* aging - 67:64 */
 | 
						|
	reg[2] |= aging & QCA8K_ATU_STATUS_M;
 | 
						|
	/* portmask - 54:48 */
 | 
						|
	reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
 | 
						|
	/* mac - 47:0 */
 | 
						|
	reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
 | 
						|
	reg[1] |= mac[1];
 | 
						|
	reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
 | 
						|
	reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
 | 
						|
	reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
 | 
						|
	reg[0] |= mac[5];
 | 
						|
 | 
						|
	/* load the array into the ARL table */
 | 
						|
	for (i = 0; i < 3; i++)
 | 
						|
		qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
 | 
						|
{
 | 
						|
	u32 reg;
 | 
						|
 | 
						|
	/* Set the command and FDB index */
 | 
						|
	reg = QCA8K_ATU_FUNC_BUSY;
 | 
						|
	reg |= cmd;
 | 
						|
	if (port >= 0) {
 | 
						|
		reg |= QCA8K_ATU_FUNC_PORT_EN;
 | 
						|
		reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Write the function register triggering the table access */
 | 
						|
	qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
 | 
						|
 | 
						|
	/* wait for completion */
 | 
						|
	if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
 | 
						|
		return -1;
 | 
						|
 | 
						|
	/* Check for table full violation when adding an entry */
 | 
						|
	if (cmd == QCA8K_FDB_LOAD) {
 | 
						|
		reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC);
 | 
						|
		if (reg & QCA8K_ATU_FUNC_FULL)
 | 
						|
			return -1;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
 | 
						|
	ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
 | 
						|
	if (ret >= 0)
 | 
						|
		qca8k_fdb_read(priv, fdb);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
 | 
						|
	      u16 vid, u8 aging)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	qca8k_fdb_write(priv, vid, port_mask, mac, aging);
 | 
						|
	ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	qca8k_fdb_write(priv, vid, port_mask, mac, 0);
 | 
						|
	ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_fdb_flush(struct qca8k_priv *priv)
 | 
						|
{
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_mib_init(struct qca8k_priv *priv)
 | 
						|
{
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
 | 
						|
	qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
 | 
						|
	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
 | 
						|
	qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
 | 
						|
{
 | 
						|
	u32 reg, val;
 | 
						|
 | 
						|
	switch (port) {
 | 
						|
	case 0:
 | 
						|
		reg = QCA8K_REG_PORT0_PAD_CTRL;
 | 
						|
		break;
 | 
						|
	case 6:
 | 
						|
		reg = QCA8K_REG_PORT6_PAD_CTRL;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		pr_err("Can't set PAD_CTRL on port %d\n", port);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Configure a port to be directly connected to an external
 | 
						|
	 * PHY or MAC.
 | 
						|
	 */
 | 
						|
	switch (mode) {
 | 
						|
	case PHY_INTERFACE_MODE_RGMII:
 | 
						|
		/* RGMII mode means no delay so don't enable the delay */
 | 
						|
		val = QCA8K_PORT_PAD_RGMII_EN;
 | 
						|
		qca8k_write(priv, reg, val);
 | 
						|
		break;
 | 
						|
	case PHY_INTERFACE_MODE_RGMII_ID:
 | 
						|
		/* RGMII_ID needs internal delay. This is enabled through
 | 
						|
		 * PORT5_PAD_CTRL for all ports, rather than individual port
 | 
						|
		 * registers
 | 
						|
		 */
 | 
						|
		qca8k_write(priv, reg,
 | 
						|
			    QCA8K_PORT_PAD_RGMII_EN |
 | 
						|
			    QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
 | 
						|
			    QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
 | 
						|
		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
 | 
						|
			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
 | 
						|
		break;
 | 
						|
	case PHY_INTERFACE_MODE_SGMII:
 | 
						|
		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		pr_err("xMII mode %d not supported\n", mode);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
 | 
						|
{
 | 
						|
	u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
 | 
						|
 | 
						|
	/* Port 0 and 6 have no internal PHY */
 | 
						|
	if (port > 0 && port < 6)
 | 
						|
		mask |= QCA8K_PORT_STATUS_LINK_AUTO;
 | 
						|
 | 
						|
	if (enable)
 | 
						|
		qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
 | 
						|
	else
 | 
						|
		qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
 | 
						|
}
 | 
						|
 | 
						|
static u32
 | 
						|
qca8k_port_to_phy(int port)
 | 
						|
{
 | 
						|
	/* From Andrew Lunn:
 | 
						|
	 * Port 0 has no internal phy.
 | 
						|
	 * Port 1 has an internal PHY at MDIO address 0.
 | 
						|
	 * Port 2 has an internal PHY at MDIO address 1.
 | 
						|
	 * ...
 | 
						|
	 * Port 5 has an internal PHY at MDIO address 4.
 | 
						|
	 * Port 6 has no internal PHY.
 | 
						|
	 */
 | 
						|
 | 
						|
	return port - 1;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
 | 
						|
{
 | 
						|
	u32 phy, val;
 | 
						|
 | 
						|
	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	/* callee is responsible for not passing bad ports,
 | 
						|
	 * but we still would like to make spills impossible.
 | 
						|
	 */
 | 
						|
	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
 | 
						|
	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
 | 
						|
	      QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
 | 
						|
	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
 | 
						|
	      QCA8K_MDIO_MASTER_DATA(data);
 | 
						|
 | 
						|
	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
 | 
						|
 | 
						|
	return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
 | 
						|
		QCA8K_MDIO_MASTER_BUSY);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
 | 
						|
{
 | 
						|
	u32 phy, val;
 | 
						|
 | 
						|
	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	/* callee is responsible for not passing bad ports,
 | 
						|
	 * but we still would like to make spills impossible.
 | 
						|
	 */
 | 
						|
	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
 | 
						|
	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
 | 
						|
	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
 | 
						|
	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
 | 
						|
 | 
						|
	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
 | 
						|
 | 
						|
	if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
 | 
						|
			    QCA8K_MDIO_MASTER_BUSY))
 | 
						|
		return -ETIMEDOUT;
 | 
						|
 | 
						|
	val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
 | 
						|
		QCA8K_MDIO_MASTER_DATA_MASK);
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = ds->priv;
 | 
						|
 | 
						|
	return qca8k_mdio_write(priv, port, regnum, data);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = ds->priv;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = qca8k_mdio_read(priv, port, regnum);
 | 
						|
 | 
						|
	if (ret < 0)
 | 
						|
		return 0xffff;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_setup_mdio_bus(struct qca8k_priv *priv)
 | 
						|
{
 | 
						|
	u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
 | 
						|
	struct device_node *ports, *port;
 | 
						|
	int err;
 | 
						|
 | 
						|
	ports = of_get_child_by_name(priv->dev->of_node, "ports");
 | 
						|
	if (!ports)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	for_each_available_child_of_node(ports, port) {
 | 
						|
		err = of_property_read_u32(port, "reg", ®);
 | 
						|
		if (err) {
 | 
						|
			of_node_put(port);
 | 
						|
			of_node_put(ports);
 | 
						|
			return err;
 | 
						|
		}
 | 
						|
 | 
						|
		if (!dsa_is_user_port(priv->ds, reg))
 | 
						|
			continue;
 | 
						|
 | 
						|
		if (of_property_read_bool(port, "phy-handle"))
 | 
						|
			external_mdio_mask |= BIT(reg);
 | 
						|
		else
 | 
						|
			internal_mdio_mask |= BIT(reg);
 | 
						|
	}
 | 
						|
 | 
						|
	of_node_put(ports);
 | 
						|
	if (!external_mdio_mask && !internal_mdio_mask) {
 | 
						|
		dev_err(priv->dev, "no PHYs are defined.\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
 | 
						|
	 * the MDIO_MASTER register also _disconnects_ the external MDC
 | 
						|
	 * passthrough to the internal PHYs. It's not possible to use both
 | 
						|
	 * configurations at the same time!
 | 
						|
	 *
 | 
						|
	 * Because this came up during the review process:
 | 
						|
	 * If the external mdio-bus driver is capable magically disabling
 | 
						|
	 * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
 | 
						|
	 * accessors for the time being, it would be possible to pull this
 | 
						|
	 * off.
 | 
						|
	 */
 | 
						|
	if (!!external_mdio_mask && !!internal_mdio_mask) {
 | 
						|
		dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (external_mdio_mask) {
 | 
						|
		/* Make sure to disable the internal mdio bus in cases
 | 
						|
		 * a dt-overlay and driver reload changed the configuration
 | 
						|
		 */
 | 
						|
 | 
						|
		qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
 | 
						|
				QCA8K_MDIO_MASTER_EN);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	priv->ops.phy_read = qca8k_phy_read;
 | 
						|
	priv->ops.phy_write = qca8k_phy_write;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_setup(struct dsa_switch *ds)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	int ret, i, phy_mode = -1;
 | 
						|
	u32 mask;
 | 
						|
 | 
						|
	/* Make sure that port 0 is the cpu port */
 | 
						|
	if (!dsa_is_cpu_port(ds, 0)) {
 | 
						|
		pr_err("port 0 is not the CPU port\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_init(&priv->reg_mutex);
 | 
						|
 | 
						|
	/* Start by setting up the register mapping */
 | 
						|
	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
 | 
						|
					&qca8k_regmap_config);
 | 
						|
	if (IS_ERR(priv->regmap))
 | 
						|
		pr_warn("regmap initialization failed");
 | 
						|
 | 
						|
	ret = qca8k_setup_mdio_bus(priv);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/* Initialize CPU port pad mode (xMII type, delays...) */
 | 
						|
	phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
 | 
						|
	if (phy_mode < 0) {
 | 
						|
		pr_err("Can't find phy-mode for master device\n");
 | 
						|
		return phy_mode;
 | 
						|
	}
 | 
						|
	ret = qca8k_set_pad_ctrl(priv, QCA8K_CPU_PORT, phy_mode);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/* Enable CPU Port, force it to maximum bandwidth and full-duplex */
 | 
						|
	mask = QCA8K_PORT_STATUS_SPEED_1000 | QCA8K_PORT_STATUS_TXFLOW |
 | 
						|
	       QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_DUPLEX;
 | 
						|
	qca8k_write(priv, QCA8K_REG_PORT_STATUS(QCA8K_CPU_PORT), mask);
 | 
						|
	qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
 | 
						|
		      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
 | 
						|
	qca8k_port_set_status(priv, QCA8K_CPU_PORT, 1);
 | 
						|
	priv->port_sts[QCA8K_CPU_PORT].enabled = 1;
 | 
						|
 | 
						|
	/* Enable MIB counters */
 | 
						|
	qca8k_mib_init(priv);
 | 
						|
 | 
						|
	/* Enable QCA header mode on the cpu port */
 | 
						|
	qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
 | 
						|
		    QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
 | 
						|
		    QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
 | 
						|
 | 
						|
	/* Disable forwarding by default on all ports */
 | 
						|
	for (i = 0; i < QCA8K_NUM_PORTS; i++)
 | 
						|
		qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
 | 
						|
			  QCA8K_PORT_LOOKUP_MEMBER, 0);
 | 
						|
 | 
						|
	/* Disable MAC by default on all user ports */
 | 
						|
	for (i = 1; i < QCA8K_NUM_PORTS; i++)
 | 
						|
		if (dsa_is_user_port(ds, i))
 | 
						|
			qca8k_port_set_status(priv, i, 0);
 | 
						|
 | 
						|
	/* Forward all unknown frames to CPU port for Linux processing */
 | 
						|
	qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
 | 
						|
		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
 | 
						|
		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
 | 
						|
		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
 | 
						|
		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
 | 
						|
 | 
						|
	/* Setup connection between CPU port & user ports */
 | 
						|
	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
 | 
						|
		/* CPU port gets connected to all user ports of the switch */
 | 
						|
		if (dsa_is_cpu_port(ds, i)) {
 | 
						|
			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
 | 
						|
				  QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
 | 
						|
		}
 | 
						|
 | 
						|
		/* Invividual user ports get connected to CPU port only */
 | 
						|
		if (dsa_is_user_port(ds, i)) {
 | 
						|
			int shift = 16 * (i % 2);
 | 
						|
 | 
						|
			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
 | 
						|
				  QCA8K_PORT_LOOKUP_MEMBER,
 | 
						|
				  BIT(QCA8K_CPU_PORT));
 | 
						|
 | 
						|
			/* Enable ARP Auto-learning by default */
 | 
						|
			qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
 | 
						|
				      QCA8K_PORT_LOOKUP_LEARN);
 | 
						|
 | 
						|
			/* For port based vlans to work we need to set the
 | 
						|
			 * default egress vid
 | 
						|
			 */
 | 
						|
			qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
 | 
						|
				  0xffff << shift, 1 << shift);
 | 
						|
			qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
 | 
						|
				    QCA8K_PORT_VLAN_CVID(1) |
 | 
						|
				    QCA8K_PORT_VLAN_SVID(1));
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Flush the FDB table */
 | 
						|
	qca8k_fdb_flush(priv);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = ds->priv;
 | 
						|
	u32 reg;
 | 
						|
 | 
						|
	/* Force fixed-link setting for CPU port, skip others. */
 | 
						|
	if (!phy_is_pseudo_fixed_link(phy))
 | 
						|
		return;
 | 
						|
 | 
						|
	/* Set port speed */
 | 
						|
	switch (phy->speed) {
 | 
						|
	case 10:
 | 
						|
		reg = QCA8K_PORT_STATUS_SPEED_10;
 | 
						|
		break;
 | 
						|
	case 100:
 | 
						|
		reg = QCA8K_PORT_STATUS_SPEED_100;
 | 
						|
		break;
 | 
						|
	case 1000:
 | 
						|
		reg = QCA8K_PORT_STATUS_SPEED_1000;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_dbg(priv->dev, "port%d link speed %dMbps not supported.\n",
 | 
						|
			port, phy->speed);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Set duplex mode */
 | 
						|
	if (phy->duplex == DUPLEX_FULL)
 | 
						|
		reg |= QCA8K_PORT_STATUS_DUPLEX;
 | 
						|
 | 
						|
	/* Force flow control */
 | 
						|
	if (dsa_is_cpu_port(ds, port))
 | 
						|
		reg |= QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_TXFLOW;
 | 
						|
 | 
						|
	/* Force link down before changing MAC options */
 | 
						|
	qca8k_port_set_status(priv, port, 0);
 | 
						|
	qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
 | 
						|
	qca8k_port_set_status(priv, port, 1);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	if (stringset != ETH_SS_STATS)
 | 
						|
		return;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
 | 
						|
		strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
 | 
						|
			ETH_GSTRING_LEN);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
 | 
						|
			uint64_t *data)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	const struct qca8k_mib_desc *mib;
 | 
						|
	u32 reg, i;
 | 
						|
	u64 hi;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
 | 
						|
		mib = &ar8327_mib[i];
 | 
						|
		reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
 | 
						|
 | 
						|
		data[i] = qca8k_read(priv, reg);
 | 
						|
		if (mib->size == 2) {
 | 
						|
			hi = qca8k_read(priv, reg + 4);
 | 
						|
			data[i] |= hi << 32;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
 | 
						|
{
 | 
						|
	if (sset != ETH_SS_STATS)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	return ARRAY_SIZE(ar8327_mib);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
 | 
						|
	u32 reg;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
 | 
						|
	if (eee->eee_enabled)
 | 
						|
		reg |= lpi_en;
 | 
						|
	else
 | 
						|
		reg &= ~lpi_en;
 | 
						|
	qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
 | 
						|
{
 | 
						|
	/* Nothing to do on the port's MAC */
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	u32 stp_state;
 | 
						|
 | 
						|
	switch (state) {
 | 
						|
	case BR_STATE_DISABLED:
 | 
						|
		stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
 | 
						|
		break;
 | 
						|
	case BR_STATE_BLOCKING:
 | 
						|
		stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
 | 
						|
		break;
 | 
						|
	case BR_STATE_LISTENING:
 | 
						|
		stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
 | 
						|
		break;
 | 
						|
	case BR_STATE_LEARNING:
 | 
						|
		stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
 | 
						|
		break;
 | 
						|
	case BR_STATE_FORWARDING:
 | 
						|
	default:
 | 
						|
		stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
 | 
						|
		  QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	int port_mask = BIT(QCA8K_CPU_PORT);
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
 | 
						|
		if (dsa_to_port(ds, i)->bridge_dev != br)
 | 
						|
			continue;
 | 
						|
		/* Add this port to the portvlan mask of the other ports
 | 
						|
		 * in the bridge
 | 
						|
		 */
 | 
						|
		qca8k_reg_set(priv,
 | 
						|
			      QCA8K_PORT_LOOKUP_CTRL(i),
 | 
						|
			      BIT(port));
 | 
						|
		if (i != port)
 | 
						|
			port_mask |= BIT(i);
 | 
						|
	}
 | 
						|
	/* Add all other ports to this ports portvlan mask */
 | 
						|
	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
 | 
						|
		  QCA8K_PORT_LOOKUP_MEMBER, port_mask);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
 | 
						|
		if (dsa_to_port(ds, i)->bridge_dev != br)
 | 
						|
			continue;
 | 
						|
		/* Remove this port to the portvlan mask of the other ports
 | 
						|
		 * in the bridge
 | 
						|
		 */
 | 
						|
		qca8k_reg_clear(priv,
 | 
						|
				QCA8K_PORT_LOOKUP_CTRL(i),
 | 
						|
				BIT(port));
 | 
						|
	}
 | 
						|
 | 
						|
	/* Set the cpu port to be the only one in the portvlan mask of
 | 
						|
	 * this port
 | 
						|
	 */
 | 
						|
	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
 | 
						|
		  QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_enable(struct dsa_switch *ds, int port,
 | 
						|
		  struct phy_device *phy)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
 | 
						|
	if (!dsa_is_user_port(ds, port))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	qca8k_port_set_status(priv, port, 1);
 | 
						|
	priv->port_sts[port].enabled = 1;
 | 
						|
 | 
						|
	phy_support_asym_pause(phy);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_port_disable(struct dsa_switch *ds, int port)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
 | 
						|
	qca8k_port_set_status(priv, port, 0);
 | 
						|
	priv->port_sts[port].enabled = 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
 | 
						|
		      u16 port_mask, u16 vid)
 | 
						|
{
 | 
						|
	/* Set the vid to the port vlan id if no vid is set */
 | 
						|
	if (!vid)
 | 
						|
		vid = 1;
 | 
						|
 | 
						|
	return qca8k_fdb_add(priv, addr, port_mask, vid,
 | 
						|
			     QCA8K_ATU_STATUS_STATIC);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_fdb_add(struct dsa_switch *ds, int port,
 | 
						|
		   const unsigned char *addr, u16 vid)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	u16 port_mask = BIT(port);
 | 
						|
 | 
						|
	return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_fdb_del(struct dsa_switch *ds, int port,
 | 
						|
		   const unsigned char *addr, u16 vid)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	u16 port_mask = BIT(port);
 | 
						|
 | 
						|
	if (!vid)
 | 
						|
		vid = 1;
 | 
						|
 | 
						|
	return qca8k_fdb_del(priv, addr, port_mask, vid);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
 | 
						|
		    dsa_fdb_dump_cb_t *cb, void *data)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 | 
						|
	struct qca8k_fdb _fdb = { 0 };
 | 
						|
	int cnt = QCA8K_NUM_FDB_RECORDS;
 | 
						|
	bool is_static;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	mutex_lock(&priv->reg_mutex);
 | 
						|
	while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
 | 
						|
		if (!_fdb.aging)
 | 
						|
			break;
 | 
						|
		is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
 | 
						|
		ret = cb(_fdb.mac, _fdb.vid, is_static, data);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
	mutex_unlock(&priv->reg_mutex);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static enum dsa_tag_protocol
 | 
						|
qca8k_get_tag_protocol(struct dsa_switch *ds, int port)
 | 
						|
{
 | 
						|
	return DSA_TAG_PROTO_QCA;
 | 
						|
}
 | 
						|
 | 
						|
static const struct dsa_switch_ops qca8k_switch_ops = {
 | 
						|
	.get_tag_protocol	= qca8k_get_tag_protocol,
 | 
						|
	.setup			= qca8k_setup,
 | 
						|
	.adjust_link            = qca8k_adjust_link,
 | 
						|
	.get_strings		= qca8k_get_strings,
 | 
						|
	.get_ethtool_stats	= qca8k_get_ethtool_stats,
 | 
						|
	.get_sset_count		= qca8k_get_sset_count,
 | 
						|
	.get_mac_eee		= qca8k_get_mac_eee,
 | 
						|
	.set_mac_eee		= qca8k_set_mac_eee,
 | 
						|
	.port_enable		= qca8k_port_enable,
 | 
						|
	.port_disable		= qca8k_port_disable,
 | 
						|
	.port_stp_state_set	= qca8k_port_stp_state_set,
 | 
						|
	.port_bridge_join	= qca8k_port_bridge_join,
 | 
						|
	.port_bridge_leave	= qca8k_port_bridge_leave,
 | 
						|
	.port_fdb_add		= qca8k_port_fdb_add,
 | 
						|
	.port_fdb_del		= qca8k_port_fdb_del,
 | 
						|
	.port_fdb_dump		= qca8k_port_fdb_dump,
 | 
						|
};
 | 
						|
 | 
						|
static int
 | 
						|
qca8k_sw_probe(struct mdio_device *mdiodev)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv;
 | 
						|
	u32 id;
 | 
						|
 | 
						|
	/* allocate the private data struct so that we can probe the switches
 | 
						|
	 * ID register
 | 
						|
	 */
 | 
						|
	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
 | 
						|
	if (!priv)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	priv->bus = mdiodev->bus;
 | 
						|
	priv->dev = &mdiodev->dev;
 | 
						|
 | 
						|
	priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
 | 
						|
						   GPIOD_ASIS);
 | 
						|
	if (IS_ERR(priv->reset_gpio))
 | 
						|
		return PTR_ERR(priv->reset_gpio);
 | 
						|
 | 
						|
	if (priv->reset_gpio) {
 | 
						|
		gpiod_set_value_cansleep(priv->reset_gpio, 1);
 | 
						|
		/* The active low duration must be greater than 10 ms
 | 
						|
		 * and checkpatch.pl wants 20 ms.
 | 
						|
		 */
 | 
						|
		msleep(20);
 | 
						|
		gpiod_set_value_cansleep(priv->reset_gpio, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	/* read the switches ID register */
 | 
						|
	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
 | 
						|
	id >>= QCA8K_MASK_CTRL_ID_S;
 | 
						|
	id &= QCA8K_MASK_CTRL_ID_M;
 | 
						|
	if (id != QCA8K_ID_QCA8337)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
 | 
						|
	if (!priv->ds)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	priv->ds->priv = priv;
 | 
						|
	priv->ops = qca8k_switch_ops;
 | 
						|
	priv->ds->ops = &priv->ops;
 | 
						|
	mutex_init(&priv->reg_mutex);
 | 
						|
	dev_set_drvdata(&mdiodev->dev, priv);
 | 
						|
 | 
						|
	return dsa_register_switch(priv->ds);
 | 
						|
}
 | 
						|
 | 
						|
static void
 | 
						|
qca8k_sw_remove(struct mdio_device *mdiodev)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < QCA8K_NUM_PORTS; i++)
 | 
						|
		qca8k_port_set_status(priv, i, 0);
 | 
						|
 | 
						|
	dsa_unregister_switch(priv->ds);
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM_SLEEP
 | 
						|
static void
 | 
						|
qca8k_set_pm(struct qca8k_priv *priv, int enable)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
 | 
						|
		if (!priv->port_sts[i].enabled)
 | 
						|
			continue;
 | 
						|
 | 
						|
		qca8k_port_set_status(priv, i, enable);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int qca8k_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	qca8k_set_pm(priv, 0);
 | 
						|
 | 
						|
	return dsa_switch_suspend(priv->ds);
 | 
						|
}
 | 
						|
 | 
						|
static int qca8k_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct qca8k_priv *priv = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	qca8k_set_pm(priv, 1);
 | 
						|
 | 
						|
	return dsa_switch_resume(priv->ds);
 | 
						|
}
 | 
						|
#endif /* CONFIG_PM_SLEEP */
 | 
						|
 | 
						|
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
 | 
						|
			 qca8k_suspend, qca8k_resume);
 | 
						|
 | 
						|
static const struct of_device_id qca8k_of_match[] = {
 | 
						|
	{ .compatible = "qca,qca8334" },
 | 
						|
	{ .compatible = "qca,qca8337" },
 | 
						|
	{ /* sentinel */ },
 | 
						|
};
 | 
						|
 | 
						|
static struct mdio_driver qca8kmdio_driver = {
 | 
						|
	.probe  = qca8k_sw_probe,
 | 
						|
	.remove = qca8k_sw_remove,
 | 
						|
	.mdiodrv.driver = {
 | 
						|
		.name = "qca8k",
 | 
						|
		.of_match_table = qca8k_of_match,
 | 
						|
		.pm = &qca8k_pm_ops,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
mdio_module_driver(qca8kmdio_driver);
 | 
						|
 | 
						|
MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
 | 
						|
MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
 | 
						|
MODULE_LICENSE("GPL v2");
 | 
						|
MODULE_ALIAS("platform:qca8k");
 |