forked from mirrors/linux
dcdecdcfe1
Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
189 lines
4.3 KiB
C
189 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* drivers/net/phy/davicom.c
|
|
*
|
|
* Driver for Davicom PHYs
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#define MII_DM9161_SCR 0x10
|
|
#define MII_DM9161_SCR_INIT 0x0610
|
|
#define MII_DM9161_SCR_RMII 0x0100
|
|
|
|
/* DM9161 Interrupt Register */
|
|
#define MII_DM9161_INTR 0x15
|
|
#define MII_DM9161_INTR_PEND 0x8000
|
|
#define MII_DM9161_INTR_DPLX_MASK 0x0800
|
|
#define MII_DM9161_INTR_SPD_MASK 0x0400
|
|
#define MII_DM9161_INTR_LINK_MASK 0x0200
|
|
#define MII_DM9161_INTR_MASK 0x0100
|
|
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
|
|
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
|
|
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
|
|
#define MII_DM9161_INTR_INIT 0x0000
|
|
#define MII_DM9161_INTR_STOP \
|
|
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
|
|
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
|
|
|
|
/* DM9161 10BT Configuration/Status */
|
|
#define MII_DM9161_10BTCSR 0x12
|
|
#define MII_DM9161_10BTCSR_INIT 0x7800
|
|
|
|
MODULE_DESCRIPTION("Davicom PHY driver");
|
|
MODULE_AUTHOR("Andy Fleming");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
#define DM9161_DELAY 1
|
|
static int dm9161_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp;
|
|
|
|
temp = phy_read(phydev, MII_DM9161_INTR);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
if (PHY_INTERRUPT_ENABLED == phydev->interrupts)
|
|
temp &= ~(MII_DM9161_INTR_STOP);
|
|
else
|
|
temp |= MII_DM9161_INTR_STOP;
|
|
|
|
temp = phy_write(phydev, MII_DM9161_INTR, temp);
|
|
|
|
return temp;
|
|
}
|
|
|
|
static int dm9161_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
/* Isolate the PHY */
|
|
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Configure the new settings */
|
|
err = genphy_config_aneg(phydev);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm9161_config_init(struct phy_device *phydev)
|
|
{
|
|
int err, temp;
|
|
|
|
/* Isolate the PHY */
|
|
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
temp = MII_DM9161_SCR_INIT;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Do not bypass the scrambler/descrambler */
|
|
err = phy_write(phydev, MII_DM9161_SCR, temp);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Clear 10BTCSR to default */
|
|
err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Reconnect the PHY, and enable Autonegotiation */
|
|
return phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
|
|
}
|
|
|
|
static int dm9161_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err = phy_read(phydev, MII_DM9161_INTR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static struct phy_driver dm91xx_driver[] = {
|
|
{
|
|
.phy_id = 0x0181b880,
|
|
.name = "Davicom DM9161E",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_init = dm9161_config_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
}, {
|
|
.phy_id = 0x0181b8b0,
|
|
.name = "Davicom DM9161B/C",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_init = dm9161_config_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
}, {
|
|
.phy_id = 0x0181b8a0,
|
|
.name = "Davicom DM9161A",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_init = dm9161_config_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
}, {
|
|
.phy_id = 0x00181b80,
|
|
.name = "Davicom DM9131",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
/* PHY_BASIC_FEATURES */
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
} };
|
|
|
|
module_phy_driver(dm91xx_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused davicom_tbl[] = {
|
|
{ 0x0181b880, 0x0ffffff0 },
|
|
{ 0x0181b8b0, 0x0ffffff0 },
|
|
{ 0x0181b8a0, 0x0ffffff0 },
|
|
{ 0x00181b80, 0x0ffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, davicom_tbl);
|