forked from mirrors/linux
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
437 lines
9.2 KiB
Text
437 lines
9.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "ARM Versatile AB";
|
|
compatible = "arm,versatile-ab";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&vic>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
i2c0 = &i2c0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x08000000>;
|
|
};
|
|
|
|
xtal24mhz: xtal24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
bridge {
|
|
compatible = "ti,ths8134b", "ti,ths8134";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
vga_bridge_in: endpoint {
|
|
remote-endpoint = <&clcd_pads_vga_dac>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
vga_bridge_out: endpoint {
|
|
remote-endpoint = <&vga_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vga {
|
|
compatible = "vga-connector";
|
|
|
|
port {
|
|
vga_con_in: endpoint {
|
|
remote-endpoint = <&vga_bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
core-module@10000000 {
|
|
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
|
|
reg = <0x10000000 0x200>;
|
|
|
|
led@08.0 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x01>;
|
|
label = "versatile:0";
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
led@08.1 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x02>;
|
|
label = "versatile:1";
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
led@08.2 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x04>;
|
|
label = "versatile:2";
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
led@08.3 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x08>;
|
|
label = "versatile:3";
|
|
default-state = "off";
|
|
};
|
|
led@08.4 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x10>;
|
|
label = "versatile:4";
|
|
default-state = "off";
|
|
};
|
|
led@08.5 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x20>;
|
|
label = "versatile:5";
|
|
default-state = "off";
|
|
};
|
|
led@08.6 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x40>;
|
|
label = "versatile:6";
|
|
default-state = "off";
|
|
};
|
|
led@08.7 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x80>;
|
|
label = "versatile:7";
|
|
default-state = "off";
|
|
};
|
|
|
|
/* OSC1 on AB, OSC4 on PB */
|
|
osc1: cm_aux_osc@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "arm,versatile-cm-auxosc";
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
|
|
timclk: timclk@1M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <24>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
pclk: pclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
};
|
|
|
|
flash@34000000 {
|
|
/* 64 MiB NOR flash in non-interleaved chips */
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x34000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
i2c0: i2c@10002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x10002000 0x1000>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1338";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
net@10010000 {
|
|
compatible = "smsc,lan91c111";
|
|
reg = <0x10010000 0x10000>;
|
|
interrupts = <25>;
|
|
};
|
|
|
|
lcd@10008000 {
|
|
compatible = "arm,versatile-lcd";
|
|
reg = <0x10008000 0x1000>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
vic: intc@10140000 {
|
|
compatible = "arm,versatile-vic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10140000 0x1000>;
|
|
clear-mask = <0xffffffff>;
|
|
valid-mask = <0xffffffff>;
|
|
};
|
|
|
|
sic: intc@10003000 {
|
|
compatible = "arm,versatile-sic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10003000 0x1000>;
|
|
interrupt-parent = <&vic>;
|
|
interrupts = <31>; /* Cascaded to vic */
|
|
clear-mask = <0xffffffff>;
|
|
/*
|
|
* Valid interrupt lines mask according to
|
|
* table 4-36 page 4-50 of ARM DUI 0225D
|
|
*/
|
|
valid-mask = <0x0760031b>;
|
|
};
|
|
|
|
dma@10130000 {
|
|
compatible = "arm,pl081", "arm,primecell";
|
|
reg = <0x10130000 0x1000>;
|
|
interrupts = <17>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
uart0: uart@101f1000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f1000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
uart1: uart@101f2000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f2000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
uart2: uart@101f3000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f3000 0x1000>;
|
|
interrupts = <14>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
smc@10100000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x10100000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mpmc@10110000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x10110000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
display@10120000 {
|
|
compatible = "arm,pl110", "arm,primecell";
|
|
reg = <0x10120000 0x1000>;
|
|
interrupts = <16>;
|
|
clocks = <&osc1>, <&pclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 800x600 16bpp @ 36MHz works fine */
|
|
max-memory-bandwidth = <54000000>;
|
|
|
|
/*
|
|
* This port is routed through a PLD (Programmable
|
|
* Logic Device) that routes the output from the CLCD
|
|
* (after transformations) to the VGA DAC and also an
|
|
* external panel connector. The PLD is essential for
|
|
* supporting RGB565/BGR565.
|
|
*
|
|
* The signals from the port thus reaches two endpoints.
|
|
* The PLD is managed through a few special bits in the
|
|
* FPGA "sysreg".
|
|
*
|
|
* This arrangement can be clearly seen in
|
|
* ARM DUI 0225D, page 3-41, figure 3-19.
|
|
*/
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clcd_pads_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
clcd_pads_vga_dac: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&vga_bridge_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sctl@101e0000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101e0000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
watchdog@101e1000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101e1000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
timer@101e2000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x101e2000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer0", "timer1", "apb_pclk";
|
|
};
|
|
|
|
timer@101e3000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x101e3000 0x1000>;
|
|
interrupts = <5>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer0", "timer1", "apb_pclk";
|
|
};
|
|
|
|
gpio0: gpio@101e4000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x101e4000 0x1000>;
|
|
gpio-controller;
|
|
interrupts = <6>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio1: gpio@101e5000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x101e5000 0x1000>;
|
|
interrupts = <7>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
rtc@101e8000 {
|
|
compatible = "arm,pl030", "arm,primecell";
|
|
reg = <0x101e8000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
sci@101f0000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101f0000 0x1000>;
|
|
interrupts = <15>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
spi@101f4000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x101f4000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
};
|
|
|
|
fpga {
|
|
compatible = "arm,versatile-fpga", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x10000000 0x10000>;
|
|
|
|
sysreg@0 {
|
|
compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
|
|
reg = <0x00000 0x1000>;
|
|
|
|
panel: display@0 {
|
|
compatible = "arm,versatile-tft-panel";
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&clcd_pads_panel>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
aaci@4000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x4000 0x1000>;
|
|
interrupts = <24>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
mmc@5000 {
|
|
compatible = "arm,pl180", "arm,primecell";
|
|
reg = <0x5000 0x1000>;
|
|
interrupts-extended = <&vic 22 &sic 1>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
};
|
|
kmi@6000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x6000 0x1000>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <3>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
kmi@7000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x7000 0x1000>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <4>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
};
|
|
};
|
|
};
|