forked from mirrors/linux
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
54 lines
3.3 KiB
C
54 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef _M68K_CONTREGS_H
|
|
#define _M68K_CONTREGS_H
|
|
|
|
/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address
|
|
* space. These are for the mmu's context register, etc.
|
|
*
|
|
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
|
|
*/
|
|
|
|
/* 3=sun3
|
|
4=sun4 (as in sun4 sysmaint student book)
|
|
c=sun4c (according to davem) */
|
|
|
|
#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
|
|
#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
|
|
#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
|
|
#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
|
|
#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
|
|
#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
|
|
#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */
|
|
#define AC_SYNC_ERR 0x60000000 /* c fault type */
|
|
#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
|
|
#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
|
|
#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
|
|
#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
|
|
#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
|
|
#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
|
|
#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
|
|
#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
|
|
#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
|
|
|
|
/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */
|
|
#define AC_M_PCR 0x0000 /* shv Processor Control Reg */
|
|
#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */
|
|
#define AC_M_CXR 0x0200 /* shv Context Register */
|
|
#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */
|
|
#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */
|
|
#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */
|
|
#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */
|
|
#define AC_M_RESET 0x0700 /* hv Reset Reg */
|
|
#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */
|
|
#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */
|
|
#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */
|
|
#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */
|
|
#define AC_M_ITR 0x1300 /* hv Index Tag Register */
|
|
#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */
|
|
#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */
|
|
#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */
|
|
#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */
|
|
#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */
|
|
#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */
|
|
|
|
#endif /* _M68K_CONTREGS_H */
|