forked from mirrors/linux
		
	 0eb2766dd6
			
		
	
	
		0eb2766dd6
		
	
	
	
	
		
			
			The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes. Depending on how many wires are used (24/12) the driver can set the correct bus_format. If the information is not available in DT then assume 24 bit, single-edge setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-3-peter.ujfalusi@ti.com
		
			
				
	
	
		
			501 lines
		
	
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			501 lines
		
	
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright (C) 2016 Texas Instruments
 | |
|  * Author: Jyri Sarha <jsarha@ti.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms of the GNU General Public License version 2 as published by
 | |
|  * the Free Software Foundation.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/fwnode.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/irq.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of_graph.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/i2c.h>
 | |
| 
 | |
| #include <drm/drmP.h>
 | |
| #include <drm/drm_atomic_helper.h>
 | |
| #include <drm/drm_crtc.h>
 | |
| #include <drm/drm_probe_helper.h>
 | |
| 
 | |
| #define HOTPLUG_DEBOUNCE_MS		1100
 | |
| 
 | |
| struct tfp410 {
 | |
| 	struct drm_bridge	bridge;
 | |
| 	struct drm_connector	connector;
 | |
| 	unsigned int		connector_type;
 | |
| 
 | |
| 	u32			bus_format;
 | |
| 	struct i2c_adapter	*ddc;
 | |
| 	struct gpio_desc	*hpd;
 | |
| 	int			hpd_irq;
 | |
| 	struct delayed_work	hpd_work;
 | |
| 	struct gpio_desc	*powerdown;
 | |
| 
 | |
| 	struct drm_bridge_timings timings;
 | |
| 
 | |
| 	struct device *dev;
 | |
| };
 | |
| 
 | |
| static inline struct tfp410 *
 | |
| drm_bridge_to_tfp410(struct drm_bridge *bridge)
 | |
| {
 | |
| 	return container_of(bridge, struct tfp410, bridge);
 | |
| }
 | |
| 
 | |
| static inline struct tfp410 *
 | |
| drm_connector_to_tfp410(struct drm_connector *connector)
 | |
| {
 | |
| 	return container_of(connector, struct tfp410, connector);
 | |
| }
 | |
| 
 | |
| static int tfp410_get_modes(struct drm_connector *connector)
 | |
| {
 | |
| 	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
 | |
| 	struct edid *edid;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!dvi->ddc)
 | |
| 		goto fallback;
 | |
| 
 | |
| 	edid = drm_get_edid(connector, dvi->ddc);
 | |
| 	if (!edid) {
 | |
| 		DRM_INFO("EDID read failed. Fallback to standard modes\n");
 | |
| 		goto fallback;
 | |
| 	}
 | |
| 
 | |
| 	drm_connector_update_edid_property(connector, edid);
 | |
| 
 | |
| 	return drm_add_edid_modes(connector, edid);
 | |
| fallback:
 | |
| 	/* No EDID, fallback on the XGA standard modes */
 | |
| 	ret = drm_add_modes_noedid(connector, 1920, 1200);
 | |
| 
 | |
| 	/* And prefer a mode pretty much anything can handle */
 | |
| 	drm_set_preferred_mode(connector, 1024, 768);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = {
 | |
| 	.get_modes	= tfp410_get_modes,
 | |
| };
 | |
| 
 | |
| static enum drm_connector_status
 | |
| tfp410_connector_detect(struct drm_connector *connector, bool force)
 | |
| {
 | |
| 	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
 | |
| 
 | |
| 	if (dvi->hpd) {
 | |
| 		if (gpiod_get_value_cansleep(dvi->hpd))
 | |
| 			return connector_status_connected;
 | |
| 		else
 | |
| 			return connector_status_disconnected;
 | |
| 	}
 | |
| 
 | |
| 	if (dvi->ddc) {
 | |
| 		if (drm_probe_ddc(dvi->ddc))
 | |
| 			return connector_status_connected;
 | |
| 		else
 | |
| 			return connector_status_disconnected;
 | |
| 	}
 | |
| 
 | |
| 	return connector_status_unknown;
 | |
| }
 | |
| 
 | |
| static const struct drm_connector_funcs tfp410_con_funcs = {
 | |
| 	.detect			= tfp410_connector_detect,
 | |
| 	.fill_modes		= drm_helper_probe_single_connector_modes,
 | |
| 	.destroy		= drm_connector_cleanup,
 | |
| 	.reset			= drm_atomic_helper_connector_reset,
 | |
| 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
 | |
| 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 | |
| };
 | |
| 
 | |
| static int tfp410_attach(struct drm_bridge *bridge)
 | |
| {
 | |
| 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!bridge->encoder) {
 | |
| 		dev_err(dvi->dev, "Missing encoder\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	if (dvi->hpd_irq >= 0)
 | |
| 		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 | |
| 	else
 | |
| 		dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 | |
| 
 | |
| 	drm_connector_helper_add(&dvi->connector,
 | |
| 				 &tfp410_con_helper_funcs);
 | |
| 	ret = drm_connector_init(bridge->dev, &dvi->connector,
 | |
| 				 &tfp410_con_funcs, dvi->connector_type);
 | |
| 	if (ret) {
 | |
| 		dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	drm_display_info_set_bus_formats(&dvi->connector.display_info,
 | |
| 					 &dvi->bus_format, 1);
 | |
| 
 | |
| 	drm_connector_attach_encoder(&dvi->connector,
 | |
| 					  bridge->encoder);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void tfp410_enable(struct drm_bridge *bridge)
 | |
| {
 | |
| 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
 | |
| 
 | |
| 	gpiod_set_value_cansleep(dvi->powerdown, 0);
 | |
| }
 | |
| 
 | |
| static void tfp410_disable(struct drm_bridge *bridge)
 | |
| {
 | |
| 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
 | |
| 
 | |
| 	gpiod_set_value_cansleep(dvi->powerdown, 1);
 | |
| }
 | |
| 
 | |
| static const struct drm_bridge_funcs tfp410_bridge_funcs = {
 | |
| 	.attach		= tfp410_attach,
 | |
| 	.enable		= tfp410_enable,
 | |
| 	.disable	= tfp410_disable,
 | |
| };
 | |
| 
 | |
| static void tfp410_hpd_work_func(struct work_struct *work)
 | |
| {
 | |
| 	struct tfp410 *dvi;
 | |
| 
 | |
| 	dvi = container_of(work, struct tfp410, hpd_work.work);
 | |
| 
 | |
| 	if (dvi->bridge.dev)
 | |
| 		drm_helper_hpd_irq_event(dvi->bridge.dev);
 | |
| }
 | |
| 
 | |
| static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg)
 | |
| {
 | |
| 	struct tfp410 *dvi = arg;
 | |
| 
 | |
| 	mod_delayed_work(system_wq, &dvi->hpd_work,
 | |
| 			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static const struct drm_bridge_timings tfp410_default_timings = {
 | |
| 	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
 | |
| 			 | DRM_BUS_FLAG_DE_HIGH,
 | |
| 	.setup_time_ps = 1200,
 | |
| 	.hold_time_ps = 1300,
 | |
| };
 | |
| 
 | |
| static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
 | |
| {
 | |
| 	struct drm_bridge_timings *timings = &dvi->timings;
 | |
| 	struct device_node *ep;
 | |
| 	u32 pclk_sample = 0;
 | |
| 	u32 bus_width = 24;
 | |
| 	s32 deskew = 0;
 | |
| 
 | |
| 	/* Start with defaults. */
 | |
| 	*timings = tfp410_default_timings;
 | |
| 
 | |
| 	if (i2c)
 | |
| 		/*
 | |
| 		 * In I2C mode timings are configured through the I2C interface.
 | |
| 		 * As the driver doesn't support I2C configuration yet, we just
 | |
| 		 * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1).
 | |
| 		 */
 | |
| 		return 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN
 | |
| 	 * and EDGE pins. They are specified in DT through endpoint properties
 | |
| 	 * and vendor-specific properties.
 | |
| 	 */
 | |
| 	ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
 | |
| 	if (!ep)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* Get the sampling edge from the endpoint. */
 | |
| 	of_property_read_u32(ep, "pclk-sample", &pclk_sample);
 | |
| 	of_property_read_u32(ep, "bus-width", &bus_width);
 | |
| 	of_node_put(ep);
 | |
| 
 | |
| 	timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
 | |
| 
 | |
| 	switch (pclk_sample) {
 | |
| 	case 0:
 | |
| 		timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
 | |
| 					 |  DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
 | |
| 					 |  DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	switch (bus_width) {
 | |
| 	case 12:
 | |
| 		dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE;
 | |
| 		break;
 | |
| 	case 24:
 | |
| 		dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Get the setup and hold time from vendor-specific properties. */
 | |
| 	of_property_read_u32(dvi->dev->of_node, "ti,deskew", (u32 *)&deskew);
 | |
| 	if (deskew < -4 || deskew > 3)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	timings->setup_time_ps = min(0, 1200 - 350 * deskew);
 | |
| 	timings->hold_time_ps = min(0, 1300 + 350 * deskew);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tfp410_get_connector_properties(struct tfp410 *dvi)
 | |
| {
 | |
| 	struct device_node *connector_node, *ddc_phandle;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* port@1 is the connector node */
 | |
| 	connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1);
 | |
| 	if (!connector_node)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (of_device_is_compatible(connector_node, "hdmi-connector"))
 | |
| 		dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
 | |
| 	else
 | |
| 		dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
 | |
| 
 | |
| 	dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
 | |
| 					"hpd-gpios", 0, GPIOD_IN, "hpd");
 | |
| 	if (IS_ERR(dvi->hpd)) {
 | |
| 		ret = PTR_ERR(dvi->hpd);
 | |
| 		dvi->hpd = NULL;
 | |
| 		if (ret == -ENOENT)
 | |
| 			ret = 0;
 | |
| 		else
 | |
| 			goto fail;
 | |
| 	}
 | |
| 
 | |
| 	ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0);
 | |
| 	if (!ddc_phandle)
 | |
| 		goto fail;
 | |
| 
 | |
| 	dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle);
 | |
| 	if (dvi->ddc)
 | |
| 		dev_info(dvi->dev, "Connector's ddc i2c bus found\n");
 | |
| 	else
 | |
| 		ret = -EPROBE_DEFER;
 | |
| 
 | |
| 	of_node_put(ddc_phandle);
 | |
| 
 | |
| fail:
 | |
| 	of_node_put(connector_node);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tfp410_init(struct device *dev, bool i2c)
 | |
| {
 | |
| 	struct tfp410 *dvi;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!dev->of_node) {
 | |
| 		dev_err(dev, "device-tree data is missing\n");
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL);
 | |
| 	if (!dvi)
 | |
| 		return -ENOMEM;
 | |
| 	dev_set_drvdata(dev, dvi);
 | |
| 
 | |
| 	dvi->bridge.funcs = &tfp410_bridge_funcs;
 | |
| 	dvi->bridge.of_node = dev->of_node;
 | |
| 	dvi->bridge.timings = &dvi->timings;
 | |
| 	dvi->dev = dev;
 | |
| 
 | |
| 	ret = tfp410_parse_timings(dvi, i2c);
 | |
| 	if (ret)
 | |
| 		goto fail;
 | |
| 
 | |
| 	ret = tfp410_get_connector_properties(dvi);
 | |
| 	if (ret)
 | |
| 		goto fail;
 | |
| 
 | |
| 	dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
 | |
| 						 GPIOD_OUT_HIGH);
 | |
| 	if (IS_ERR(dvi->powerdown)) {
 | |
| 		dev_err(dev, "failed to parse powerdown gpio\n");
 | |
| 		return PTR_ERR(dvi->powerdown);
 | |
| 	}
 | |
| 
 | |
| 	if (dvi->hpd)
 | |
| 		dvi->hpd_irq = gpiod_to_irq(dvi->hpd);
 | |
| 	else
 | |
| 		dvi->hpd_irq = -ENXIO;
 | |
| 
 | |
| 	if (dvi->hpd_irq >= 0) {
 | |
| 		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
 | |
| 
 | |
| 		ret = devm_request_threaded_irq(dev, dvi->hpd_irq,
 | |
| 			NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING |
 | |
| 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 | |
| 			"hdmi-hpd", dvi);
 | |
| 		if (ret) {
 | |
| 			DRM_ERROR("failed to register hpd interrupt\n");
 | |
| 			goto fail;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	drm_bridge_add(&dvi->bridge);
 | |
| 
 | |
| 	return 0;
 | |
| fail:
 | |
| 	i2c_put_adapter(dvi->ddc);
 | |
| 	if (dvi->hpd)
 | |
| 		gpiod_put(dvi->hpd);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tfp410_fini(struct device *dev)
 | |
| {
 | |
| 	struct tfp410 *dvi = dev_get_drvdata(dev);
 | |
| 
 | |
| 	cancel_delayed_work_sync(&dvi->hpd_work);
 | |
| 
 | |
| 	drm_bridge_remove(&dvi->bridge);
 | |
| 
 | |
| 	if (dvi->ddc)
 | |
| 		i2c_put_adapter(dvi->ddc);
 | |
| 	if (dvi->hpd)
 | |
| 		gpiod_put(dvi->hpd);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tfp410_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	return tfp410_init(&pdev->dev, false);
 | |
| }
 | |
| 
 | |
| static int tfp410_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	return tfp410_fini(&pdev->dev);
 | |
| }
 | |
| 
 | |
| static const struct of_device_id tfp410_match[] = {
 | |
| 	{ .compatible = "ti,tfp410" },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, tfp410_match);
 | |
| 
 | |
| static struct platform_driver tfp410_platform_driver = {
 | |
| 	.probe	= tfp410_probe,
 | |
| 	.remove	= tfp410_remove,
 | |
| 	.driver	= {
 | |
| 		.name		= "tfp410-bridge",
 | |
| 		.of_match_table	= tfp410_match,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_I2C)
 | |
| /* There is currently no i2c functionality. */
 | |
| static int tfp410_i2c_probe(struct i2c_client *client,
 | |
| 			    const struct i2c_device_id *id)
 | |
| {
 | |
| 	int reg;
 | |
| 
 | |
| 	if (!client->dev.of_node ||
 | |
| 	    of_property_read_u32(client->dev.of_node, "reg", ®)) {
 | |
| 		dev_err(&client->dev,
 | |
| 			"Can't get i2c reg property from device-tree\n");
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	return tfp410_init(&client->dev, true);
 | |
| }
 | |
| 
 | |
| static int tfp410_i2c_remove(struct i2c_client *client)
 | |
| {
 | |
| 	return tfp410_fini(&client->dev);
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id tfp410_i2c_ids[] = {
 | |
| 	{ "tfp410", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids);
 | |
| 
 | |
| static struct i2c_driver tfp410_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "tfp410",
 | |
| 		.of_match_table = of_match_ptr(tfp410_match),
 | |
| 	},
 | |
| 	.id_table	= tfp410_i2c_ids,
 | |
| 	.probe		= tfp410_i2c_probe,
 | |
| 	.remove		= tfp410_i2c_remove,
 | |
| };
 | |
| #endif /* IS_ENABLED(CONFIG_I2C) */
 | |
| 
 | |
| static struct {
 | |
| 	uint i2c:1;
 | |
| 	uint platform:1;
 | |
| }  tfp410_registered_driver;
 | |
| 
 | |
| static int __init tfp410_module_init(void)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_I2C)
 | |
| 	ret = i2c_add_driver(&tfp410_i2c_driver);
 | |
| 	if (ret)
 | |
| 		pr_err("%s: registering i2c driver failed: %d",
 | |
| 		       __func__, ret);
 | |
| 	else
 | |
| 		tfp410_registered_driver.i2c = 1;
 | |
| #endif
 | |
| 
 | |
| 	ret = platform_driver_register(&tfp410_platform_driver);
 | |
| 	if (ret)
 | |
| 		pr_err("%s: registering platform driver failed: %d",
 | |
| 		       __func__, ret);
 | |
| 	else
 | |
| 		tfp410_registered_driver.platform = 1;
 | |
| 
 | |
| 	if (tfp410_registered_driver.i2c ||
 | |
| 	    tfp410_registered_driver.platform)
 | |
| 		return 0;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| module_init(tfp410_module_init);
 | |
| 
 | |
| static void __exit tfp410_module_exit(void)
 | |
| {
 | |
| #if IS_ENABLED(CONFIG_I2C)
 | |
| 	if (tfp410_registered_driver.i2c)
 | |
| 		i2c_del_driver(&tfp410_i2c_driver);
 | |
| #endif
 | |
| 	if (tfp410_registered_driver.platform)
 | |
| 		platform_driver_unregister(&tfp410_platform_driver);
 | |
| }
 | |
| module_exit(tfp410_module_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>");
 | |
| MODULE_DESCRIPTION("TI TFP410 DVI bridge driver");
 | |
| MODULE_LICENSE("GPL");
 |