forked from mirrors/linux
		
	 9bf85fbc9d
			
		
	
	
		9bf85fbc9d
		
	
	
	
	
		
			
			Add Nuvoton NPCM BMC Analog-to-Digital Converter(ADC) driver. The NPCM ADC is a 10-bit converter for eight channel inputs. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
		
			
				
	
	
		
			335 lines
		
	
	
	
		
			8.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			335 lines
		
	
	
	
		
			8.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| // Copyright (c) 2019 Nuvoton Technology corporation.
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/mfd/syscon.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/uaccess.h>
 | |
| 
 | |
| struct npcm_adc {
 | |
| 	bool int_status;
 | |
| 	u32 adc_sample_hz;
 | |
| 	struct device *dev;
 | |
| 	void __iomem *regs;
 | |
| 	struct clk *adc_clk;
 | |
| 	wait_queue_head_t wq;
 | |
| 	struct regulator *vref;
 | |
| 	struct regmap *rst_regmap;
 | |
| };
 | |
| 
 | |
| /* NPCM7xx reset module */
 | |
| #define NPCM7XX_IPSRST1_OFFSET		0x020
 | |
| #define NPCM7XX_IPSRST1_ADC_RST		BIT(27)
 | |
| 
 | |
| /* ADC registers */
 | |
| #define NPCM_ADCCON	 0x00
 | |
| #define NPCM_ADCDATA	 0x04
 | |
| 
 | |
| /* ADCCON Register Bits */
 | |
| #define NPCM_ADCCON_ADC_INT_EN		BIT(21)
 | |
| #define NPCM_ADCCON_REFSEL		BIT(19)
 | |
| #define NPCM_ADCCON_ADC_INT_ST		BIT(18)
 | |
| #define NPCM_ADCCON_ADC_EN		BIT(17)
 | |
| #define NPCM_ADCCON_ADC_RST		BIT(16)
 | |
| #define NPCM_ADCCON_ADC_CONV		BIT(13)
 | |
| 
 | |
| #define NPCM_ADCCON_CH_MASK		GENMASK(27, 24)
 | |
| #define NPCM_ADCCON_CH(x)		((x) << 24)
 | |
| #define NPCM_ADCCON_DIV_SHIFT		1
 | |
| #define NPCM_ADCCON_DIV_MASK		GENMASK(8, 1)
 | |
| #define NPCM_ADC_DATA_MASK(x)		((x) & GENMASK(9, 0))
 | |
| 
 | |
| #define NPCM_ADC_ENABLE		(NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
 | |
| 
 | |
| /* ADC General Definition */
 | |
| #define NPCM_RESOLUTION_BITS		10
 | |
| #define NPCM_INT_VREF_MV		2000
 | |
| 
 | |
| #define NPCM_ADC_CHAN(ch) {					\
 | |
| 	.type = IIO_VOLTAGE,					\
 | |
| 	.indexed = 1,						\
 | |
| 	.channel = ch,						\
 | |
| 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 | |
| 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
 | |
| 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 | |
| }
 | |
| 
 | |
| static const struct iio_chan_spec npcm_adc_iio_channels[] = {
 | |
| 	NPCM_ADC_CHAN(0),
 | |
| 	NPCM_ADC_CHAN(1),
 | |
| 	NPCM_ADC_CHAN(2),
 | |
| 	NPCM_ADC_CHAN(3),
 | |
| 	NPCM_ADC_CHAN(4),
 | |
| 	NPCM_ADC_CHAN(5),
 | |
| 	NPCM_ADC_CHAN(6),
 | |
| 	NPCM_ADC_CHAN(7),
 | |
| };
 | |
| 
 | |
| static irqreturn_t npcm_adc_isr(int irq, void *data)
 | |
| {
 | |
| 	u32 regtemp;
 | |
| 	struct iio_dev *indio_dev = data;
 | |
| 	struct npcm_adc *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	regtemp = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
 | |
| 		iowrite32(regtemp, info->regs + NPCM_ADCCON);
 | |
| 		wake_up_interruptible(&info->wq);
 | |
| 		info->int_status = true;
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
 | |
| {
 | |
| 	int ret;
 | |
| 	u32 regtemp;
 | |
| 
 | |
| 	/* Select ADC channel */
 | |
| 	regtemp = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	regtemp &= ~NPCM_ADCCON_CH_MASK;
 | |
| 	info->int_status = false;
 | |
| 	iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
 | |
| 		  NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
 | |
| 
 | |
| 	ret = wait_event_interruptible_timeout(info->wq, info->int_status,
 | |
| 					       msecs_to_jiffies(10));
 | |
| 	if (ret == 0) {
 | |
| 		regtemp = ioread32(info->regs + NPCM_ADCCON);
 | |
| 		if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
 | |
| 			/* if conversion failed - reset ADC module */
 | |
| 			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
 | |
| 				     NPCM7XX_IPSRST1_ADC_RST);
 | |
| 			msleep(100);
 | |
| 			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
 | |
| 				     0x0);
 | |
| 			msleep(100);
 | |
| 
 | |
| 			/* Enable ADC and start conversion module */
 | |
| 			iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
 | |
| 				  info->regs + NPCM_ADCCON);
 | |
| 			dev_err(info->dev, "RESET ADC Complete\n");
 | |
| 		}
 | |
| 		return -ETIMEDOUT;
 | |
| 	}
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int npcm_adc_read_raw(struct iio_dev *indio_dev,
 | |
| 			     struct iio_chan_spec const *chan, int *val,
 | |
| 			     int *val2, long mask)
 | |
| {
 | |
| 	int ret;
 | |
| 	int vref_uv;
 | |
| 	struct npcm_adc *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		mutex_lock(&indio_dev->mlock);
 | |
| 		ret = npcm_adc_read(info, val, chan->channel);
 | |
| 		mutex_unlock(&indio_dev->mlock);
 | |
| 		if (ret) {
 | |
| 			dev_err(info->dev, "NPCM ADC read failed\n");
 | |
| 			return ret;
 | |
| 		}
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		if (info->vref) {
 | |
| 			vref_uv = regulator_get_voltage(info->vref);
 | |
| 			*val = vref_uv / 1000;
 | |
| 		} else {
 | |
| 			*val = NPCM_INT_VREF_MV;
 | |
| 		}
 | |
| 		*val2 = NPCM_RESOLUTION_BITS;
 | |
| 		return IIO_VAL_FRACTIONAL_LOG2;
 | |
| 	case IIO_CHAN_INFO_SAMP_FREQ:
 | |
| 		*val = info->adc_sample_hz;
 | |
| 		return IIO_VAL_INT;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct iio_info npcm_adc_iio_info = {
 | |
| 	.read_raw = &npcm_adc_read_raw,
 | |
| };
 | |
| 
 | |
| static const struct of_device_id npcm_adc_match[] = {
 | |
| 	{ .compatible = "nuvoton,npcm750-adc", },
 | |
| 	{ /* sentinel */ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, npcm_adc_match);
 | |
| 
 | |
| static int npcm_adc_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	int ret;
 | |
| 	int irq;
 | |
| 	u32 div;
 | |
| 	u32 reg_con;
 | |
| 	struct resource *res;
 | |
| 	struct npcm_adc *info;
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct device_node *np = pdev->dev.of_node;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 	info = iio_priv(indio_dev);
 | |
| 
 | |
| 	info->dev = &pdev->dev;
 | |
| 
 | |
| 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | |
| 	info->regs = devm_ioremap_resource(&pdev->dev, res);
 | |
| 	if (IS_ERR(info->regs))
 | |
| 		return PTR_ERR(info->regs);
 | |
| 
 | |
| 	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
 | |
| 	if (IS_ERR(info->adc_clk)) {
 | |
| 		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
 | |
| 		return PTR_ERR(info->adc_clk);
 | |
| 	}
 | |
| 
 | |
| 	/* calculate ADC clock sample rate */
 | |
| 	reg_con = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	div = reg_con & NPCM_ADCCON_DIV_MASK;
 | |
| 	div = div >> NPCM_ADCCON_DIV_SHIFT;
 | |
| 	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
 | |
| 
 | |
| 	if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
 | |
| 		info->rst_regmap = syscon_regmap_lookup_by_compatible
 | |
| 			("nuvoton,npcm750-rst");
 | |
| 		if (IS_ERR(info->rst_regmap)) {
 | |
| 			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
 | |
| 			ret = PTR_ERR(info->rst_regmap);
 | |
| 			goto err_disable_clk;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	irq = platform_get_irq(pdev, 0);
 | |
| 	if (irq <= 0) {
 | |
| 		dev_err(dev, "failed getting interrupt resource\n");
 | |
| 		ret = -EINVAL;
 | |
| 		goto err_disable_clk;
 | |
| 	}
 | |
| 
 | |
| 	ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
 | |
| 			       "NPCM_ADC", indio_dev);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "failed requesting interrupt\n");
 | |
| 		goto err_disable_clk;
 | |
| 	}
 | |
| 
 | |
| 	reg_con = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
 | |
| 	if (!IS_ERR(info->vref)) {
 | |
| 		ret = regulator_enable(info->vref);
 | |
| 		if (ret) {
 | |
| 			dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
 | |
| 			goto err_disable_clk;
 | |
| 		}
 | |
| 
 | |
| 		iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
 | |
| 			  info->regs + NPCM_ADCCON);
 | |
| 	} else {
 | |
| 		/*
 | |
| 		 * Any error which is not ENODEV indicates the regulator
 | |
| 		 * has been specified and so is a failure case.
 | |
| 		 */
 | |
| 		if (PTR_ERR(info->vref) != -ENODEV) {
 | |
| 			ret = PTR_ERR(info->vref);
 | |
| 			goto err_disable_clk;
 | |
| 		}
 | |
| 
 | |
| 		/* Use internal reference */
 | |
| 		iowrite32(reg_con | NPCM_ADCCON_REFSEL,
 | |
| 			  info->regs + NPCM_ADCCON);
 | |
| 	}
 | |
| 
 | |
| 	init_waitqueue_head(&info->wq);
 | |
| 
 | |
| 	reg_con = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	reg_con |= NPCM_ADC_ENABLE;
 | |
| 
 | |
| 	/* Enable the ADC Module */
 | |
| 	iowrite32(reg_con, info->regs + NPCM_ADCCON);
 | |
| 
 | |
| 	/* Start ADC conversion */
 | |
| 	iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
 | |
| 
 | |
| 	platform_set_drvdata(pdev, indio_dev);
 | |
| 	indio_dev->name = dev_name(&pdev->dev);
 | |
| 	indio_dev->dev.parent = &pdev->dev;
 | |
| 	indio_dev->info = &npcm_adc_iio_info;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 	indio_dev->channels = npcm_adc_iio_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
 | |
| 
 | |
| 	ret = iio_device_register(indio_dev);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "Couldn't register the device.\n");
 | |
| 		goto err_iio_register;
 | |
| 	}
 | |
| 
 | |
| 	pr_info("NPCM ADC driver probed\n");
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_iio_register:
 | |
| 	iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
 | |
| 	if (!IS_ERR(info->vref))
 | |
| 		regulator_disable(info->vref);
 | |
| err_disable_clk:
 | |
| 	clk_disable_unprepare(info->adc_clk);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int npcm_adc_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 | |
| 	struct npcm_adc *info = iio_priv(indio_dev);
 | |
| 	u32 regtemp;
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 
 | |
| 	regtemp = ioread32(info->regs + NPCM_ADCCON);
 | |
| 	iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
 | |
| 	if (!IS_ERR(info->vref))
 | |
| 		regulator_disable(info->vref);
 | |
| 	clk_disable_unprepare(info->adc_clk);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver npcm_adc_driver = {
 | |
| 	.probe		= npcm_adc_probe,
 | |
| 	.remove		= npcm_adc_remove,
 | |
| 	.driver		= {
 | |
| 		.name	= "npcm_adc",
 | |
| 		.of_match_table = npcm_adc_match,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| module_platform_driver(npcm_adc_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
 | |
| MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
 | |
| MODULE_LICENSE("GPL v2");
 |