forked from mirrors/linux
		
	 7c14947e4d
			
		
	
	
		7c14947e4d
		
	
	
	
	
		
			
			This patch adds support for the regulator framework to the tsl2772 driver. Driver was tested using a LG Nexus 5 (hammerhead) phone with the two regulators and on a Raspberry Pi 2 without any regulators controlling the power to the sensor. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
		
			
				
	
	
		
			1990 lines
		
	
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1990 lines
		
	
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * Device driver for monitoring ambient light intensity in (lux) and proximity
 | |
|  * detection (prox) within the TAOS TSL2571, TSL2671, TMD2671, TSL2771, TMD2771,
 | |
|  * TSL2572, TSL2672, TMD2672, TSL2772, and TMD2772 devices.
 | |
|  *
 | |
|  * Copyright (c) 2012, TAOS Corporation.
 | |
|  * Copyright (c) 2017-2018 Brian Masney <masneyb@onstation.org>
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/iio/events.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/sysfs.h>
 | |
| #include <linux/platform_data/tsl2772.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| 
 | |
| /* Cal defs */
 | |
| #define PROX_STAT_CAL			0
 | |
| #define PROX_STAT_SAMP			1
 | |
| #define MAX_SAMPLES_CAL			200
 | |
| 
 | |
| /* TSL2772 Device ID */
 | |
| #define TRITON_ID			0x00
 | |
| #define SWORDFISH_ID			0x30
 | |
| #define HALIBUT_ID			0x20
 | |
| 
 | |
| /* Lux calculation constants */
 | |
| #define TSL2772_LUX_CALC_OVER_FLOW	65535
 | |
| 
 | |
| /*
 | |
|  * TAOS Register definitions - Note: depending on device, some of these register
 | |
|  * are not used and the register address is benign.
 | |
|  */
 | |
| 
 | |
| /* Register offsets */
 | |
| #define TSL2772_MAX_CONFIG_REG		16
 | |
| 
 | |
| /* Device Registers and Masks */
 | |
| #define TSL2772_CNTRL			0x00
 | |
| #define TSL2772_ALS_TIME		0X01
 | |
| #define TSL2772_PRX_TIME		0x02
 | |
| #define TSL2772_WAIT_TIME		0x03
 | |
| #define TSL2772_ALS_MINTHRESHLO		0X04
 | |
| #define TSL2772_ALS_MINTHRESHHI		0X05
 | |
| #define TSL2772_ALS_MAXTHRESHLO		0X06
 | |
| #define TSL2772_ALS_MAXTHRESHHI		0X07
 | |
| #define TSL2772_PRX_MINTHRESHLO		0X08
 | |
| #define TSL2772_PRX_MINTHRESHHI		0X09
 | |
| #define TSL2772_PRX_MAXTHRESHLO		0X0A
 | |
| #define TSL2772_PRX_MAXTHRESHHI		0X0B
 | |
| #define TSL2772_PERSISTENCE		0x0C
 | |
| #define TSL2772_ALS_PRX_CONFIG		0x0D
 | |
| #define TSL2772_PRX_COUNT		0x0E
 | |
| #define TSL2772_GAIN			0x0F
 | |
| #define TSL2772_NOTUSED			0x10
 | |
| #define TSL2772_REVID			0x11
 | |
| #define TSL2772_CHIPID			0x12
 | |
| #define TSL2772_STATUS			0x13
 | |
| #define TSL2772_ALS_CHAN0LO		0x14
 | |
| #define TSL2772_ALS_CHAN0HI		0x15
 | |
| #define TSL2772_ALS_CHAN1LO		0x16
 | |
| #define TSL2772_ALS_CHAN1HI		0x17
 | |
| #define TSL2772_PRX_LO			0x18
 | |
| #define TSL2772_PRX_HI			0x19
 | |
| 
 | |
| /* tsl2772 cmd reg masks */
 | |
| #define TSL2772_CMD_REG			0x80
 | |
| #define TSL2772_CMD_SPL_FN		0x60
 | |
| #define TSL2772_CMD_REPEAT_PROTO	0x00
 | |
| #define TSL2772_CMD_AUTOINC_PROTO	0x20
 | |
| 
 | |
| #define TSL2772_CMD_PROX_INT_CLR	0X05
 | |
| #define TSL2772_CMD_ALS_INT_CLR		0x06
 | |
| #define TSL2772_CMD_PROXALS_INT_CLR	0X07
 | |
| 
 | |
| /* tsl2772 cntrl reg masks */
 | |
| #define TSL2772_CNTL_ADC_ENBL		0x02
 | |
| #define TSL2772_CNTL_PWR_ON		0x01
 | |
| 
 | |
| /* tsl2772 status reg masks */
 | |
| #define TSL2772_STA_ADC_VALID		0x01
 | |
| #define TSL2772_STA_PRX_VALID		0x02
 | |
| #define TSL2772_STA_ADC_PRX_VALID	(TSL2772_STA_ADC_VALID | \
 | |
| 					 TSL2772_STA_PRX_VALID)
 | |
| #define TSL2772_STA_ALS_INTR		0x10
 | |
| #define TSL2772_STA_PRX_INTR		0x20
 | |
| 
 | |
| /* tsl2772 cntrl reg masks */
 | |
| #define TSL2772_CNTL_REG_CLEAR		0x00
 | |
| #define TSL2772_CNTL_PROX_INT_ENBL	0X20
 | |
| #define TSL2772_CNTL_ALS_INT_ENBL	0X10
 | |
| #define TSL2772_CNTL_WAIT_TMR_ENBL	0X08
 | |
| #define TSL2772_CNTL_PROX_DET_ENBL	0X04
 | |
| #define TSL2772_CNTL_PWRON		0x01
 | |
| #define TSL2772_CNTL_ALSPON_ENBL	0x03
 | |
| #define TSL2772_CNTL_INTALSPON_ENBL	0x13
 | |
| #define TSL2772_CNTL_PROXPON_ENBL	0x0F
 | |
| #define TSL2772_CNTL_INTPROXPON_ENBL	0x2F
 | |
| 
 | |
| #define TSL2772_ALS_GAIN_TRIM_MIN	250
 | |
| #define TSL2772_ALS_GAIN_TRIM_MAX	4000
 | |
| 
 | |
| #define TSL2772_MAX_PROX_LEDS		2
 | |
| 
 | |
| #define TSL2772_BOOT_MIN_SLEEP_TIME	10000
 | |
| #define TSL2772_BOOT_MAX_SLEEP_TIME	28000
 | |
| 
 | |
| /* Device family members */
 | |
| enum {
 | |
| 	tsl2571,
 | |
| 	tsl2671,
 | |
| 	tmd2671,
 | |
| 	tsl2771,
 | |
| 	tmd2771,
 | |
| 	tsl2572,
 | |
| 	tsl2672,
 | |
| 	tmd2672,
 | |
| 	tsl2772,
 | |
| 	tmd2772,
 | |
| 	apds9930,
 | |
| };
 | |
| 
 | |
| enum {
 | |
| 	TSL2772_CHIP_UNKNOWN = 0,
 | |
| 	TSL2772_CHIP_WORKING = 1,
 | |
| 	TSL2772_CHIP_SUSPENDED = 2
 | |
| };
 | |
| 
 | |
| /* Per-device data */
 | |
| struct tsl2772_als_info {
 | |
| 	u16 als_ch0;
 | |
| 	u16 als_ch1;
 | |
| 	u16 lux;
 | |
| };
 | |
| 
 | |
| struct tsl2772_chip_info {
 | |
| 	int chan_table_elements;
 | |
| 	struct iio_chan_spec channel_with_events[4];
 | |
| 	struct iio_chan_spec channel_without_events[4];
 | |
| 	const struct iio_info *info;
 | |
| };
 | |
| 
 | |
| static const int tsl2772_led_currents[][2] = {
 | |
| 	{ 100000, TSL2772_100_mA },
 | |
| 	{  50000, TSL2772_50_mA },
 | |
| 	{  25000, TSL2772_25_mA },
 | |
| 	{  13000, TSL2772_13_mA },
 | |
| 	{      0, 0 }
 | |
| };
 | |
| 
 | |
| struct tsl2772_chip {
 | |
| 	kernel_ulong_t id;
 | |
| 	struct mutex prox_mutex;
 | |
| 	struct mutex als_mutex;
 | |
| 	struct i2c_client *client;
 | |
| 	struct regulator *vdd_supply;
 | |
| 	struct regulator *vddio_supply;
 | |
| 	u16 prox_data;
 | |
| 	struct tsl2772_als_info als_cur_info;
 | |
| 	struct tsl2772_settings settings;
 | |
| 	struct tsl2772_platform_data *pdata;
 | |
| 	int als_gain_time_scale;
 | |
| 	int als_saturation;
 | |
| 	int tsl2772_chip_status;
 | |
| 	u8 tsl2772_config[TSL2772_MAX_CONFIG_REG];
 | |
| 	const struct tsl2772_chip_info	*chip_info;
 | |
| 	const struct iio_info *info;
 | |
| 	s64 event_timestamp;
 | |
| 	/*
 | |
| 	 * This structure is intentionally large to accommodate
 | |
| 	 * updates via sysfs.
 | |
| 	 * Sized to 9 = max 8 segments + 1 termination segment
 | |
| 	 */
 | |
| 	struct tsl2772_lux tsl2772_device_lux[TSL2772_MAX_LUX_TABLE_SIZE];
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Different devices require different coefficents, and these numbers were
 | |
|  * derived from the 'Lux Equation' section of the various device datasheets.
 | |
|  * All of these coefficients assume a Glass Attenuation (GA) factor of 1.
 | |
|  * The coefficients are multiplied by 1000 to avoid floating point operations.
 | |
|  * The two rows in each table correspond to the Lux1 and Lux2 equations from
 | |
|  * the datasheets.
 | |
|  */
 | |
| static const struct tsl2772_lux tsl2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
 | |
| 	{ 53000, 106000 },
 | |
| 	{ 31800,  53000 },
 | |
| 	{ 0,          0 },
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_lux tmd2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
 | |
| 	{ 24000,  48000 },
 | |
| 	{ 14400,  24000 },
 | |
| 	{ 0,          0 },
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_lux tsl2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
 | |
| 	{ 60000, 112200 },
 | |
| 	{ 37800,  60000 },
 | |
| 	{     0,      0 },
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_lux tmd2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
 | |
| 	{ 20000,  35000 },
 | |
| 	{ 12600,  20000 },
 | |
| 	{     0,      0 },
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_lux apds9930_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
 | |
| 	{ 52000,  96824 },
 | |
| 	{ 38792,  67132 },
 | |
| 	{     0,      0 },
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
 | |
| 	[tsl2571] = tsl2x71_lux_table,
 | |
| 	[tsl2671] = tsl2x71_lux_table,
 | |
| 	[tmd2671] = tmd2x71_lux_table,
 | |
| 	[tsl2771] = tsl2x71_lux_table,
 | |
| 	[tmd2771] = tmd2x71_lux_table,
 | |
| 	[tsl2572] = tsl2x72_lux_table,
 | |
| 	[tsl2672] = tsl2x72_lux_table,
 | |
| 	[tmd2672] = tmd2x72_lux_table,
 | |
| 	[tsl2772] = tsl2x72_lux_table,
 | |
| 	[tmd2772] = tmd2x72_lux_table,
 | |
| 	[apds9930] = apds9930_lux_table,
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_settings tsl2772_default_settings = {
 | |
| 	.als_time = 255, /* 2.72 / 2.73 ms */
 | |
| 	.als_gain = 0,
 | |
| 	.prox_time = 255, /* 2.72 / 2.73 ms */
 | |
| 	.prox_gain = 0,
 | |
| 	.wait_time = 255,
 | |
| 	.als_prox_config = 0,
 | |
| 	.als_gain_trim = 1000,
 | |
| 	.als_cal_target = 150,
 | |
| 	.als_persistence = 1,
 | |
| 	.als_interrupt_en = false,
 | |
| 	.als_thresh_low = 200,
 | |
| 	.als_thresh_high = 256,
 | |
| 	.prox_persistence = 1,
 | |
| 	.prox_interrupt_en = false,
 | |
| 	.prox_thres_low  = 0,
 | |
| 	.prox_thres_high = 512,
 | |
| 	.prox_max_samples_cal = 30,
 | |
| 	.prox_pulse_count = 8,
 | |
| 	.prox_diode = TSL2772_DIODE1,
 | |
| 	.prox_power = TSL2772_100_mA
 | |
| };
 | |
| 
 | |
| static const s16 tsl2772_als_gain[] = {
 | |
| 	1,
 | |
| 	8,
 | |
| 	16,
 | |
| 	120
 | |
| };
 | |
| 
 | |
| static const s16 tsl2772_prox_gain[] = {
 | |
| 	1,
 | |
| 	2,
 | |
| 	4,
 | |
| 	8
 | |
| };
 | |
| 
 | |
| static const int tsl2772_int_time_avail[][6] = {
 | |
| 	[tsl2571] = { 0, 2720, 0, 2720, 0, 696000 },
 | |
| 	[tsl2671] = { 0, 2720, 0, 2720, 0, 696000 },
 | |
| 	[tmd2671] = { 0, 2720, 0, 2720, 0, 696000 },
 | |
| 	[tsl2771] = { 0, 2720, 0, 2720, 0, 696000 },
 | |
| 	[tmd2771] = { 0, 2720, 0, 2720, 0, 696000 },
 | |
| 	[tsl2572] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| 	[tsl2672] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| 	[tmd2672] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| 	[tsl2772] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| 	[tmd2772] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| 	[apds9930] = { 0, 2730, 0, 2730, 0, 699000 },
 | |
| };
 | |
| 
 | |
| static int tsl2772_int_calibscale_avail[] = { 1, 8, 16, 120 };
 | |
| 
 | |
| static int tsl2772_prox_calibscale_avail[] = { 1, 2, 4, 8 };
 | |
| 
 | |
| /* Channel variations */
 | |
| enum {
 | |
| 	ALS,
 | |
| 	PRX,
 | |
| 	ALSPRX,
 | |
| 	PRX2,
 | |
| 	ALSPRX2,
 | |
| };
 | |
| 
 | |
| static const u8 device_channel_config[] = {
 | |
| 	[tsl2571] = ALS,
 | |
| 	[tsl2671] = PRX,
 | |
| 	[tmd2671] = PRX,
 | |
| 	[tsl2771] = ALSPRX,
 | |
| 	[tmd2771] = ALSPRX,
 | |
| 	[tsl2572] = ALS,
 | |
| 	[tsl2672] = PRX2,
 | |
| 	[tmd2672] = PRX2,
 | |
| 	[tsl2772] = ALSPRX2,
 | |
| 	[tmd2772] = ALSPRX2,
 | |
| 	[apds9930] = ALSPRX2,
 | |
| };
 | |
| 
 | |
| static int tsl2772_read_status(struct tsl2772_chip *chip)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(chip->client,
 | |
| 				       TSL2772_CMD_REG | TSL2772_STATUS);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to read STATUS register: %d\n", __func__,
 | |
| 			ret);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_write_control_reg(struct tsl2772_chip *chip, u8 data)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(chip->client,
 | |
| 					TSL2772_CMD_REG | TSL2772_CNTRL, data);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to write to control register %x: %d\n",
 | |
| 			__func__, data, ret);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_autoinc_regs(struct tsl2772_chip *chip, int lower_reg,
 | |
| 				     int upper_reg)
 | |
| {
 | |
| 	u8 buf[2];
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(chip->client,
 | |
| 				   TSL2772_CMD_REG | TSL2772_CMD_AUTOINC_PROTO |
 | |
| 				   lower_reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to enable auto increment protocol: %d\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(chip->client,
 | |
| 				       TSL2772_CMD_REG | lower_reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to read from register %x: %d\n", __func__,
 | |
| 			lower_reg, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	buf[0] = ret;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(chip->client,
 | |
| 				       TSL2772_CMD_REG | upper_reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to read from register %x: %d\n", __func__,
 | |
| 			upper_reg, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	buf[1] = ret;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(chip->client,
 | |
| 				   TSL2772_CMD_REG | TSL2772_CMD_REPEAT_PROTO |
 | |
| 				   lower_reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to enable repeated byte protocol: %d\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return le16_to_cpup((const __le16 *)&buf[0]);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tsl2772_get_lux() - Reads and calculates current lux value.
 | |
|  * @indio_dev:	pointer to IIO device
 | |
|  *
 | |
|  * The raw ch0 and ch1 values of the ambient light sensed in the last
 | |
|  * integration cycle are read from the device. The raw values are multiplied
 | |
|  * by a device-specific scale factor, and divided by the integration time and
 | |
|  * device gain. The code supports multiple lux equations through the lux table
 | |
|  * coefficients. A lux gain trim is applied to each lux equation, and then the
 | |
|  * maximum lux within the interval 0..65535 is selected.
 | |
|  */
 | |
| static int tsl2772_get_lux(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	struct tsl2772_lux *p;
 | |
| 	int max_lux, ret;
 | |
| 	bool overflow;
 | |
| 
 | |
| 	mutex_lock(&chip->als_mutex);
 | |
| 
 | |
| 	if (chip->tsl2772_chip_status != TSL2772_CHIP_WORKING) {
 | |
| 		dev_err(&chip->client->dev, "%s: device is not enabled\n",
 | |
| 			__func__);
 | |
| 		ret = -EBUSY;
 | |
| 		goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	ret = tsl2772_read_status(chip);
 | |
| 	if (ret < 0)
 | |
| 		goto out_unlock;
 | |
| 
 | |
| 	if (!(ret & TSL2772_STA_ADC_VALID)) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: data not valid yet\n", __func__);
 | |
| 		ret = chip->als_cur_info.lux; /* return LAST VALUE */
 | |
| 		goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN0LO,
 | |
| 					TSL2772_ALS_CHAN0HI);
 | |
| 	if (ret < 0)
 | |
| 		goto out_unlock;
 | |
| 	chip->als_cur_info.als_ch0 = ret;
 | |
| 
 | |
| 	ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN1LO,
 | |
| 					TSL2772_ALS_CHAN1HI);
 | |
| 	if (ret < 0)
 | |
| 		goto out_unlock;
 | |
| 	chip->als_cur_info.als_ch1 = ret;
 | |
| 
 | |
| 	if (chip->als_cur_info.als_ch0 >= chip->als_saturation) {
 | |
| 		max_lux = TSL2772_LUX_CALC_OVER_FLOW;
 | |
| 		goto update_struct_with_max_lux;
 | |
| 	}
 | |
| 
 | |
| 	if (!chip->als_cur_info.als_ch0) {
 | |
| 		/* have no data, so return LAST VALUE */
 | |
| 		ret = chip->als_cur_info.lux;
 | |
| 		goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	max_lux = 0;
 | |
| 	overflow = false;
 | |
| 	for (p = (struct tsl2772_lux *)chip->tsl2772_device_lux; p->ch0 != 0;
 | |
| 	     p++) {
 | |
| 		int lux;
 | |
| 
 | |
| 		lux = ((chip->als_cur_info.als_ch0 * p->ch0) -
 | |
| 		       (chip->als_cur_info.als_ch1 * p->ch1)) /
 | |
| 			chip->als_gain_time_scale;
 | |
| 
 | |
| 		/*
 | |
| 		 * The als_gain_trim can have a value within the range 250..4000
 | |
| 		 * and is a multiplier for the lux. A trim of 1000 makes no
 | |
| 		 * changes to the lux, less than 1000 scales it down, and
 | |
| 		 * greater than 1000 scales it up.
 | |
| 		 */
 | |
| 		lux = (lux * chip->settings.als_gain_trim) / 1000;
 | |
| 
 | |
| 		if (lux > TSL2772_LUX_CALC_OVER_FLOW) {
 | |
| 			overflow = true;
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		max_lux = max(max_lux, lux);
 | |
| 	}
 | |
| 
 | |
| 	if (overflow && max_lux == 0)
 | |
| 		max_lux = TSL2772_LUX_CALC_OVER_FLOW;
 | |
| 
 | |
| update_struct_with_max_lux:
 | |
| 	chip->als_cur_info.lux = max_lux;
 | |
| 	ret = max_lux;
 | |
| 
 | |
| out_unlock:
 | |
| 	mutex_unlock(&chip->als_mutex);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tsl2772_get_prox() - Reads proximity data registers and updates
 | |
|  *                      chip->prox_data.
 | |
|  *
 | |
|  * @indio_dev:	pointer to IIO device
 | |
|  */
 | |
| static int tsl2772_get_prox(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->prox_mutex);
 | |
| 
 | |
| 	ret = tsl2772_read_status(chip);
 | |
| 	if (ret < 0)
 | |
| 		goto prox_poll_err;
 | |
| 
 | |
| 	switch (chip->id) {
 | |
| 	case tsl2571:
 | |
| 	case tsl2671:
 | |
| 	case tmd2671:
 | |
| 	case tsl2771:
 | |
| 	case tmd2771:
 | |
| 		if (!(ret & TSL2772_STA_ADC_VALID)) {
 | |
| 			ret = -EINVAL;
 | |
| 			goto prox_poll_err;
 | |
| 		}
 | |
| 		break;
 | |
| 	case tsl2572:
 | |
| 	case tsl2672:
 | |
| 	case tmd2672:
 | |
| 	case tsl2772:
 | |
| 	case tmd2772:
 | |
| 	case apds9930:
 | |
| 		if (!(ret & TSL2772_STA_PRX_VALID)) {
 | |
| 			ret = -EINVAL;
 | |
| 			goto prox_poll_err;
 | |
| 		}
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	ret = tsl2772_read_autoinc_regs(chip, TSL2772_PRX_LO, TSL2772_PRX_HI);
 | |
| 	if (ret < 0)
 | |
| 		goto prox_poll_err;
 | |
| 	chip->prox_data = ret;
 | |
| 
 | |
| prox_poll_err:
 | |
| 	mutex_unlock(&chip->prox_mutex);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_prox_led_current(struct tsl2772_chip *chip)
 | |
| {
 | |
| 	struct device_node *of_node = chip->client->dev.of_node;
 | |
| 	int ret, tmp, i;
 | |
| 
 | |
| 	ret = of_property_read_u32(of_node, "led-max-microamp", &tmp);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (i = 0; tsl2772_led_currents[i][0] != 0; i++) {
 | |
| 		if (tmp == tsl2772_led_currents[i][0]) {
 | |
| 			chip->settings.prox_power = tsl2772_led_currents[i][1];
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	dev_err(&chip->client->dev, "Invalid value %d for led-max-microamp\n",
 | |
| 		tmp);
 | |
| 
 | |
| 	return -EINVAL;
 | |
| 
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_prox_diodes(struct tsl2772_chip *chip)
 | |
| {
 | |
| 	struct device_node *of_node = chip->client->dev.of_node;
 | |
| 	int i, ret, num_leds, prox_diode_mask;
 | |
| 	u32 leds[TSL2772_MAX_PROX_LEDS];
 | |
| 
 | |
| 	ret = of_property_count_u32_elems(of_node, "amstaos,proximity-diodes");
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	num_leds = ret;
 | |
| 	if (num_leds > TSL2772_MAX_PROX_LEDS)
 | |
| 		num_leds = TSL2772_MAX_PROX_LEDS;
 | |
| 
 | |
| 	ret = of_property_read_u32_array(of_node, "amstaos,proximity-diodes",
 | |
| 					 leds, num_leds);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"Invalid value for amstaos,proximity-diodes: %d.\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	prox_diode_mask = 0;
 | |
| 	for (i = 0; i < num_leds; i++) {
 | |
| 		if (leds[i] == 0)
 | |
| 			prox_diode_mask |= TSL2772_DIODE0;
 | |
| 		else if (leds[i] == 1)
 | |
| 			prox_diode_mask |= TSL2772_DIODE1;
 | |
| 		else {
 | |
| 			dev_err(&chip->client->dev,
 | |
| 				"Invalid value %d in amstaos,proximity-diodes.\n",
 | |
| 				leds[i]);
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void tsl2772_parse_dt(struct tsl2772_chip *chip)
 | |
| {
 | |
| 	tsl2772_read_prox_led_current(chip);
 | |
| 	tsl2772_read_prox_diodes(chip);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tsl2772_defaults() - Populates the device nominal operating parameters
 | |
|  *                      with those provided by a 'platform' data struct or
 | |
|  *                      with prefined defaults.
 | |
|  *
 | |
|  * @chip:               pointer to device structure.
 | |
|  */
 | |
| static void tsl2772_defaults(struct tsl2772_chip *chip)
 | |
| {
 | |
| 	/* If Operational settings defined elsewhere.. */
 | |
| 	if (chip->pdata && chip->pdata->platform_default_settings)
 | |
| 		memcpy(&chip->settings, chip->pdata->platform_default_settings,
 | |
| 		       sizeof(tsl2772_default_settings));
 | |
| 	else
 | |
| 		memcpy(&chip->settings, &tsl2772_default_settings,
 | |
| 		       sizeof(tsl2772_default_settings));
 | |
| 
 | |
| 	/* Load up the proper lux table. */
 | |
| 	if (chip->pdata && chip->pdata->platform_lux_table[0].ch0 != 0)
 | |
| 		memcpy(chip->tsl2772_device_lux,
 | |
| 		       chip->pdata->platform_lux_table,
 | |
| 		       sizeof(chip->pdata->platform_lux_table));
 | |
| 	else
 | |
| 		memcpy(chip->tsl2772_device_lux,
 | |
| 		       tsl2772_default_lux_table_group[chip->id],
 | |
| 		       TSL2772_DEFAULT_TABLE_BYTES);
 | |
| 
 | |
| 	tsl2772_parse_dt(chip);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tsl2772_als_calibrate() -	Obtain single reading and calculate
 | |
|  *                              the als_gain_trim.
 | |
|  *
 | |
|  * @indio_dev:	pointer to IIO device
 | |
|  */
 | |
| static int tsl2772_als_calibrate(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret, lux_val;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(chip->client,
 | |
| 				       TSL2772_CMD_REG | TSL2772_CNTRL);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to read from the CNTRL register\n",
 | |
| 			__func__);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	if ((ret & (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON))
 | |
| 			!= (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON)) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: Device is not powered on and/or ADC is not enabled\n",
 | |
| 			__func__);
 | |
| 		return -EINVAL;
 | |
| 	} else if ((ret & TSL2772_STA_ADC_VALID) != TSL2772_STA_ADC_VALID) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: The two ADC channels have not completed an integration cycle\n",
 | |
| 			__func__);
 | |
| 		return -ENODATA;
 | |
| 	}
 | |
| 
 | |
| 	lux_val = tsl2772_get_lux(indio_dev);
 | |
| 	if (lux_val < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to get lux\n", __func__);
 | |
| 		return lux_val;
 | |
| 	}
 | |
| 	if (lux_val == 0)
 | |
| 		return -ERANGE;
 | |
| 
 | |
| 	ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) /
 | |
| 			lux_val;
 | |
| 	if (ret < TSL2772_ALS_GAIN_TRIM_MIN || ret > TSL2772_ALS_GAIN_TRIM_MAX)
 | |
| 		return -ERANGE;
 | |
| 
 | |
| 	chip->settings.als_gain_trim = ret;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void tsl2772_disable_regulators_action(void *_data)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = _data;
 | |
| 
 | |
| 	regulator_disable(chip->vdd_supply);
 | |
| 	regulator_disable(chip->vddio_supply);
 | |
| }
 | |
| 
 | |
| static int tsl2772_enable_regulator(struct tsl2772_chip *chip,
 | |
| 				    struct regulator *regulator)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regulator_enable(regulator);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev, "Failed to enable regulator: %d\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct regulator *tsl2772_get_regulator(struct tsl2772_chip *chip,
 | |
| 					       char *name)
 | |
| {
 | |
| 	struct regulator *regulator;
 | |
| 	int ret;
 | |
| 
 | |
| 	regulator = devm_regulator_get(&chip->client->dev, name);
 | |
| 	if (IS_ERR(regulator)) {
 | |
| 		if (PTR_ERR(regulator) != -EPROBE_DEFER)
 | |
| 			dev_err(&chip->client->dev,
 | |
| 				"Failed to get %s regulator %d\n",
 | |
| 				name, (int)PTR_ERR(regulator));
 | |
| 
 | |
| 		return regulator;
 | |
| 	}
 | |
| 
 | |
| 	ret = tsl2772_enable_regulator(chip, regulator);
 | |
| 	if (ret < 0)
 | |
| 		return ERR_PTR(ret);
 | |
| 
 | |
| 	return regulator;
 | |
| }
 | |
| 
 | |
| static int tsl2772_chip_on(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret, i, als_count, als_time_us;
 | |
| 	u8 *dev_reg, reg_val;
 | |
| 
 | |
| 	/* Non calculated parameters */
 | |
| 	chip->tsl2772_config[TSL2772_ALS_TIME] = chip->settings.als_time;
 | |
| 	chip->tsl2772_config[TSL2772_PRX_TIME] = chip->settings.prox_time;
 | |
| 	chip->tsl2772_config[TSL2772_WAIT_TIME] = chip->settings.wait_time;
 | |
| 	chip->tsl2772_config[TSL2772_ALS_PRX_CONFIG] =
 | |
| 		chip->settings.als_prox_config;
 | |
| 
 | |
| 	chip->tsl2772_config[TSL2772_ALS_MINTHRESHLO] =
 | |
| 		(chip->settings.als_thresh_low) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_ALS_MINTHRESHHI] =
 | |
| 		(chip->settings.als_thresh_low >> 8) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_ALS_MAXTHRESHLO] =
 | |
| 		(chip->settings.als_thresh_high) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_ALS_MAXTHRESHHI] =
 | |
| 		(chip->settings.als_thresh_high >> 8) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_PERSISTENCE] =
 | |
| 		(chip->settings.prox_persistence & 0xFF) << 4 |
 | |
| 		(chip->settings.als_persistence & 0xFF);
 | |
| 
 | |
| 	chip->tsl2772_config[TSL2772_PRX_COUNT] =
 | |
| 			chip->settings.prox_pulse_count;
 | |
| 	chip->tsl2772_config[TSL2772_PRX_MINTHRESHLO] =
 | |
| 			(chip->settings.prox_thres_low) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_PRX_MINTHRESHHI] =
 | |
| 			(chip->settings.prox_thres_low >> 8) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_PRX_MAXTHRESHLO] =
 | |
| 			(chip->settings.prox_thres_high) & 0xFF;
 | |
| 	chip->tsl2772_config[TSL2772_PRX_MAXTHRESHHI] =
 | |
| 			(chip->settings.prox_thres_high >> 8) & 0xFF;
 | |
| 
 | |
| 	/* and make sure we're not already on */
 | |
| 	if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) {
 | |
| 		/* if forcing a register update - turn off, then on */
 | |
| 		dev_info(&chip->client->dev, "device is already enabled\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Set the gain based on tsl2772_settings struct */
 | |
| 	chip->tsl2772_config[TSL2772_GAIN] =
 | |
| 		(chip->settings.als_gain & 0xFF) |
 | |
| 		((chip->settings.prox_gain & 0xFF) << 2) |
 | |
| 		(chip->settings.prox_diode << 4) |
 | |
| 		(chip->settings.prox_power << 6);
 | |
| 
 | |
| 	/* set chip time scaling and saturation */
 | |
| 	als_count = 256 - chip->settings.als_time;
 | |
| 	als_time_us = als_count * tsl2772_int_time_avail[chip->id][3];
 | |
| 	chip->als_saturation = als_count * 768; /* 75% of full scale */
 | |
| 	chip->als_gain_time_scale = als_time_us *
 | |
| 		tsl2772_als_gain[chip->settings.als_gain];
 | |
| 
 | |
| 	/*
 | |
| 	 * TSL2772 Specific power-on / adc enable sequence
 | |
| 	 * Power on the device 1st.
 | |
| 	 */
 | |
| 	ret = tsl2772_write_control_reg(chip, TSL2772_CNTL_PWR_ON);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/*
 | |
| 	 * Use the following shadow copy for our delay before enabling ADC.
 | |
| 	 * Write all the registers.
 | |
| 	 */
 | |
| 	for (i = 0, dev_reg = chip->tsl2772_config;
 | |
| 			i < TSL2772_MAX_CONFIG_REG; i++) {
 | |
| 		int reg = TSL2772_CMD_REG + i;
 | |
| 
 | |
| 		ret = i2c_smbus_write_byte_data(chip->client, reg,
 | |
| 						*dev_reg++);
 | |
| 		if (ret < 0) {
 | |
| 			dev_err(&chip->client->dev,
 | |
| 				"%s: failed to write to register %x: %d\n",
 | |
| 				__func__, reg, ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Power-on settling time */
 | |
| 	usleep_range(3000, 3500);
 | |
| 
 | |
| 	reg_val = TSL2772_CNTL_PWR_ON | TSL2772_CNTL_ADC_ENBL |
 | |
| 		  TSL2772_CNTL_PROX_DET_ENBL;
 | |
| 	if (chip->settings.als_interrupt_en)
 | |
| 		reg_val |= TSL2772_CNTL_ALS_INT_ENBL;
 | |
| 	if (chip->settings.prox_interrupt_en)
 | |
| 		reg_val |= TSL2772_CNTL_PROX_INT_ENBL;
 | |
| 
 | |
| 	ret = tsl2772_write_control_reg(chip, reg_val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(chip->client,
 | |
| 				   TSL2772_CMD_REG | TSL2772_CMD_SPL_FN |
 | |
| 				   TSL2772_CMD_PROXALS_INT_CLR);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to clear interrupt status: %d\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	chip->tsl2772_chip_status = TSL2772_CHIP_WORKING;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_chip_off(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	/* turn device off */
 | |
| 	chip->tsl2772_chip_status = TSL2772_CHIP_SUSPENDED;
 | |
| 	return tsl2772_write_control_reg(chip, 0x00);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tsl2772_invoke_change - power cycle the device to implement the user
 | |
|  *                         parameters
 | |
|  * @indio_dev:	pointer to IIO device
 | |
|  *
 | |
|  * Obtain and lock both ALS and PROX resources, determine and save device state
 | |
|  * (On/Off), cycle device to implement updated parameter, put device back into
 | |
|  * proper state, and unlock resource.
 | |
|  */
 | |
| static int tsl2772_invoke_change(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int device_status = chip->tsl2772_chip_status;
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->als_mutex);
 | |
| 	mutex_lock(&chip->prox_mutex);
 | |
| 
 | |
| 	if (device_status == TSL2772_CHIP_WORKING) {
 | |
| 		ret = tsl2772_chip_off(indio_dev);
 | |
| 		if (ret < 0)
 | |
| 			goto unlock;
 | |
| 	}
 | |
| 
 | |
| 	ret = tsl2772_chip_on(indio_dev);
 | |
| 
 | |
| unlock:
 | |
| 	mutex_unlock(&chip->prox_mutex);
 | |
| 	mutex_unlock(&chip->als_mutex);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_prox_cal(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int prox_history[MAX_SAMPLES_CAL + 1];
 | |
| 	int i, ret, mean, max, sample_sum;
 | |
| 
 | |
| 	if (chip->settings.prox_max_samples_cal < 1 ||
 | |
| 	    chip->settings.prox_max_samples_cal > MAX_SAMPLES_CAL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	for (i = 0; i < chip->settings.prox_max_samples_cal; i++) {
 | |
| 		usleep_range(15000, 17500);
 | |
| 		ret = tsl2772_get_prox(indio_dev);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		prox_history[i] = chip->prox_data;
 | |
| 	}
 | |
| 
 | |
| 	sample_sum = 0;
 | |
| 	max = INT_MIN;
 | |
| 	for (i = 0; i < chip->settings.prox_max_samples_cal; i++) {
 | |
| 		sample_sum += prox_history[i];
 | |
| 		max = max(max, prox_history[i]);
 | |
| 	}
 | |
| 	mean = sample_sum / chip->settings.prox_max_samples_cal;
 | |
| 
 | |
| 	chip->settings.prox_thres_high = (max << 1) - mean;
 | |
| 
 | |
| 	return tsl2772_invoke_change(indio_dev);
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_avail(struct iio_dev *indio_dev,
 | |
| 			      struct iio_chan_spec const *chan,
 | |
| 			      const int **vals, int *type, int *length,
 | |
| 			      long mask)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_CALIBSCALE:
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			*length = ARRAY_SIZE(tsl2772_int_calibscale_avail);
 | |
| 			*vals = tsl2772_int_calibscale_avail;
 | |
| 		} else {
 | |
| 			*length = ARRAY_SIZE(tsl2772_prox_calibscale_avail);
 | |
| 			*vals = tsl2772_prox_calibscale_avail;
 | |
| 		}
 | |
| 		*type = IIO_VAL_INT;
 | |
| 		return IIO_AVAIL_LIST;
 | |
| 	case IIO_CHAN_INFO_INT_TIME:
 | |
| 		*length = ARRAY_SIZE(tsl2772_int_time_avail[chip->id]);
 | |
| 		*vals = tsl2772_int_time_avail[chip->id];
 | |
| 		*type = IIO_VAL_INT_PLUS_MICRO;
 | |
| 		return IIO_AVAIL_RANGE;
 | |
| 	}
 | |
| 
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static ssize_t in_illuminance0_target_input_show(struct device *dev,
 | |
| 						 struct device_attribute *attr,
 | |
| 						 char *buf)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
 | |
| }
 | |
| 
 | |
| static ssize_t in_illuminance0_target_input_store(struct device *dev,
 | |
| 						  struct device_attribute *attr,
 | |
| 						  const char *buf, size_t len)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	u16 value;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (kstrtou16(buf, 0, &value))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	chip->settings.als_cal_target = value;
 | |
| 	ret = tsl2772_invoke_change(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static ssize_t in_illuminance0_calibrate_store(struct device *dev,
 | |
| 					       struct device_attribute *attr,
 | |
| 					       const char *buf, size_t len)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 | |
| 	bool value;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (kstrtobool(buf, &value) || !value)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = tsl2772_als_calibrate(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = tsl2772_invoke_change(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static ssize_t in_illuminance0_lux_table_show(struct device *dev,
 | |
| 					      struct device_attribute *attr,
 | |
| 					      char *buf)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
 | |
| 	int i = 0;
 | |
| 	int offset = 0;
 | |
| 
 | |
| 	while (i < TSL2772_MAX_LUX_TABLE_SIZE) {
 | |
| 		offset += snprintf(buf + offset, PAGE_SIZE, "%u,%u,",
 | |
| 			chip->tsl2772_device_lux[i].ch0,
 | |
| 			chip->tsl2772_device_lux[i].ch1);
 | |
| 		if (chip->tsl2772_device_lux[i].ch0 == 0) {
 | |
| 			/*
 | |
| 			 * We just printed the first "0" entry.
 | |
| 			 * Now get rid of the extra "," and break.
 | |
| 			 */
 | |
| 			offset--;
 | |
| 			break;
 | |
| 		}
 | |
| 		i++;
 | |
| 	}
 | |
| 
 | |
| 	offset += snprintf(buf + offset, PAGE_SIZE, "\n");
 | |
| 	return offset;
 | |
| }
 | |
| 
 | |
| static ssize_t in_illuminance0_lux_table_store(struct device *dev,
 | |
| 					       struct device_attribute *attr,
 | |
| 					       const char *buf, size_t len)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int value[ARRAY_SIZE(chip->tsl2772_device_lux) * 2 + 1];
 | |
| 	int n, ret;
 | |
| 
 | |
| 	get_options(buf, ARRAY_SIZE(value), value);
 | |
| 
 | |
| 	/*
 | |
| 	 * We now have an array of ints starting at value[1], and
 | |
| 	 * enumerated by value[0].
 | |
| 	 * We expect each group of two ints to be one table entry,
 | |
| 	 * and the last table entry is all 0.
 | |
| 	 */
 | |
| 	n = value[0];
 | |
| 	if ((n % 2) || n < 4 ||
 | |
| 	    n > ((ARRAY_SIZE(chip->tsl2772_device_lux) - 1) * 2))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if ((value[(n - 1)] | value[n]) != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) {
 | |
| 		ret = tsl2772_chip_off(indio_dev);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Zero out the table */
 | |
| 	memset(chip->tsl2772_device_lux, 0, sizeof(chip->tsl2772_device_lux));
 | |
| 	memcpy(chip->tsl2772_device_lux, &value[1], (value[0] * 4));
 | |
| 
 | |
| 	ret = tsl2772_invoke_change(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static ssize_t in_proximity0_calibrate_store(struct device *dev,
 | |
| 					     struct device_attribute *attr,
 | |
| 					     const char *buf, size_t len)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 | |
| 	bool value;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (kstrtobool(buf, &value) || !value)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = tsl2772_prox_cal(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = tsl2772_invoke_change(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_interrupt_config(struct iio_dev *indio_dev,
 | |
| 					 const struct iio_chan_spec *chan,
 | |
| 					 enum iio_event_type type,
 | |
| 					 enum iio_event_direction dir)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	if (chan->type == IIO_INTENSITY)
 | |
| 		return chip->settings.als_interrupt_en;
 | |
| 	else
 | |
| 		return chip->settings.prox_interrupt_en;
 | |
| }
 | |
| 
 | |
| static int tsl2772_write_interrupt_config(struct iio_dev *indio_dev,
 | |
| 					  const struct iio_chan_spec *chan,
 | |
| 					  enum iio_event_type type,
 | |
| 					  enum iio_event_direction dir,
 | |
| 					  int val)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	if (chan->type == IIO_INTENSITY)
 | |
| 		chip->settings.als_interrupt_en = val ? true : false;
 | |
| 	else
 | |
| 		chip->settings.prox_interrupt_en = val ? true : false;
 | |
| 
 | |
| 	return tsl2772_invoke_change(indio_dev);
 | |
| }
 | |
| 
 | |
| static int tsl2772_write_event_value(struct iio_dev *indio_dev,
 | |
| 				     const struct iio_chan_spec *chan,
 | |
| 				     enum iio_event_type type,
 | |
| 				     enum iio_event_direction dir,
 | |
| 				     enum iio_event_info info,
 | |
| 				     int val, int val2)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret = -EINVAL, count, persistence;
 | |
| 	u8 time;
 | |
| 
 | |
| 	switch (info) {
 | |
| 	case IIO_EV_INFO_VALUE:
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			switch (dir) {
 | |
| 			case IIO_EV_DIR_RISING:
 | |
| 				chip->settings.als_thresh_high = val;
 | |
| 				ret = 0;
 | |
| 				break;
 | |
| 			case IIO_EV_DIR_FALLING:
 | |
| 				chip->settings.als_thresh_low = val;
 | |
| 				ret = 0;
 | |
| 				break;
 | |
| 			default:
 | |
| 				break;
 | |
| 			}
 | |
| 		} else {
 | |
| 			switch (dir) {
 | |
| 			case IIO_EV_DIR_RISING:
 | |
| 				chip->settings.prox_thres_high = val;
 | |
| 				ret = 0;
 | |
| 				break;
 | |
| 			case IIO_EV_DIR_FALLING:
 | |
| 				chip->settings.prox_thres_low = val;
 | |
| 				ret = 0;
 | |
| 				break;
 | |
| 			default:
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 		break;
 | |
| 	case IIO_EV_INFO_PERIOD:
 | |
| 		if (chan->type == IIO_INTENSITY)
 | |
| 			time = chip->settings.als_time;
 | |
| 		else
 | |
| 			time = chip->settings.prox_time;
 | |
| 
 | |
| 		count = 256 - time;
 | |
| 		persistence = ((val * 1000000) + val2) /
 | |
| 			(count * tsl2772_int_time_avail[chip->id][3]);
 | |
| 
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			/* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */
 | |
| 			if (persistence > 3)
 | |
| 				persistence = (persistence / 5) + 3;
 | |
| 
 | |
| 			chip->settings.als_persistence = persistence;
 | |
| 		} else {
 | |
| 			chip->settings.prox_persistence = persistence;
 | |
| 		}
 | |
| 
 | |
| 		ret = 0;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return tsl2772_invoke_change(indio_dev);
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_event_value(struct iio_dev *indio_dev,
 | |
| 				    const struct iio_chan_spec *chan,
 | |
| 				    enum iio_event_type type,
 | |
| 				    enum iio_event_direction dir,
 | |
| 				    enum iio_event_info info,
 | |
| 				    int *val, int *val2)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int filter_delay, persistence;
 | |
| 	u8 time;
 | |
| 
 | |
| 	switch (info) {
 | |
| 	case IIO_EV_INFO_VALUE:
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			switch (dir) {
 | |
| 			case IIO_EV_DIR_RISING:
 | |
| 				*val = chip->settings.als_thresh_high;
 | |
| 				return IIO_VAL_INT;
 | |
| 			case IIO_EV_DIR_FALLING:
 | |
| 				*val = chip->settings.als_thresh_low;
 | |
| 				return IIO_VAL_INT;
 | |
| 			default:
 | |
| 				return -EINVAL;
 | |
| 			}
 | |
| 		} else {
 | |
| 			switch (dir) {
 | |
| 			case IIO_EV_DIR_RISING:
 | |
| 				*val = chip->settings.prox_thres_high;
 | |
| 				return IIO_VAL_INT;
 | |
| 			case IIO_EV_DIR_FALLING:
 | |
| 				*val = chip->settings.prox_thres_low;
 | |
| 				return IIO_VAL_INT;
 | |
| 			default:
 | |
| 				return -EINVAL;
 | |
| 			}
 | |
| 		}
 | |
| 		break;
 | |
| 	case IIO_EV_INFO_PERIOD:
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			time = chip->settings.als_time;
 | |
| 			persistence = chip->settings.als_persistence;
 | |
| 
 | |
| 			/* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */
 | |
| 			if (persistence > 3)
 | |
| 				persistence = (persistence - 3) * 5;
 | |
| 		} else {
 | |
| 			time = chip->settings.prox_time;
 | |
| 			persistence = chip->settings.prox_persistence;
 | |
| 		}
 | |
| 
 | |
| 		filter_delay = persistence * (256 - time) *
 | |
| 			tsl2772_int_time_avail[chip->id][3];
 | |
| 
 | |
| 		*val = filter_delay / 1000000;
 | |
| 		*val2 = filter_delay % 1000000;
 | |
| 		return IIO_VAL_INT_PLUS_MICRO;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int tsl2772_read_raw(struct iio_dev *indio_dev,
 | |
| 			    struct iio_chan_spec const *chan,
 | |
| 			    int *val,
 | |
| 			    int *val2,
 | |
| 			    long mask)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_PROCESSED:
 | |
| 		switch (chan->type) {
 | |
| 		case IIO_LIGHT:
 | |
| 			tsl2772_get_lux(indio_dev);
 | |
| 			*val = chip->als_cur_info.lux;
 | |
| 			return IIO_VAL_INT;
 | |
| 		default:
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		switch (chan->type) {
 | |
| 		case IIO_INTENSITY:
 | |
| 			tsl2772_get_lux(indio_dev);
 | |
| 			if (chan->channel == 0)
 | |
| 				*val = chip->als_cur_info.als_ch0;
 | |
| 			else
 | |
| 				*val = chip->als_cur_info.als_ch1;
 | |
| 			return IIO_VAL_INT;
 | |
| 		case IIO_PROXIMITY:
 | |
| 			tsl2772_get_prox(indio_dev);
 | |
| 			*val = chip->prox_data;
 | |
| 			return IIO_VAL_INT;
 | |
| 		default:
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 		break;
 | |
| 	case IIO_CHAN_INFO_CALIBSCALE:
 | |
| 		if (chan->type == IIO_LIGHT)
 | |
| 			*val = tsl2772_als_gain[chip->settings.als_gain];
 | |
| 		else
 | |
| 			*val = tsl2772_prox_gain[chip->settings.prox_gain];
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_CALIBBIAS:
 | |
| 		*val = chip->settings.als_gain_trim;
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_INT_TIME:
 | |
| 		*val = 0;
 | |
| 		*val2 = (256 - chip->settings.als_time) *
 | |
| 			tsl2772_int_time_avail[chip->id][3];
 | |
| 		return IIO_VAL_INT_PLUS_MICRO;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int tsl2772_write_raw(struct iio_dev *indio_dev,
 | |
| 			     struct iio_chan_spec const *chan,
 | |
| 			     int val,
 | |
| 			     int val2,
 | |
| 			     long mask)
 | |
| {
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_CALIBSCALE:
 | |
| 		if (chan->type == IIO_INTENSITY) {
 | |
| 			switch (val) {
 | |
| 			case 1:
 | |
| 				chip->settings.als_gain = 0;
 | |
| 				break;
 | |
| 			case 8:
 | |
| 				chip->settings.als_gain = 1;
 | |
| 				break;
 | |
| 			case 16:
 | |
| 				chip->settings.als_gain = 2;
 | |
| 				break;
 | |
| 			case 120:
 | |
| 				chip->settings.als_gain = 3;
 | |
| 				break;
 | |
| 			default:
 | |
| 				return -EINVAL;
 | |
| 			}
 | |
| 		} else {
 | |
| 			switch (val) {
 | |
| 			case 1:
 | |
| 				chip->settings.prox_gain = 0;
 | |
| 				break;
 | |
| 			case 2:
 | |
| 				chip->settings.prox_gain = 1;
 | |
| 				break;
 | |
| 			case 4:
 | |
| 				chip->settings.prox_gain = 2;
 | |
| 				break;
 | |
| 			case 8:
 | |
| 				chip->settings.prox_gain = 3;
 | |
| 				break;
 | |
| 			default:
 | |
| 				return -EINVAL;
 | |
| 			}
 | |
| 		}
 | |
| 		break;
 | |
| 	case IIO_CHAN_INFO_CALIBBIAS:
 | |
| 		if (val < TSL2772_ALS_GAIN_TRIM_MIN ||
 | |
| 		    val > TSL2772_ALS_GAIN_TRIM_MAX)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		chip->settings.als_gain_trim = val;
 | |
| 		break;
 | |
| 	case IIO_CHAN_INFO_INT_TIME:
 | |
| 		if (val != 0 || val2 < tsl2772_int_time_avail[chip->id][1] ||
 | |
| 		    val2 > tsl2772_int_time_avail[chip->id][5])
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		chip->settings.als_time = 256 -
 | |
| 			(val2 / tsl2772_int_time_avail[chip->id][3]);
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return tsl2772_invoke_change(indio_dev);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR_RW(in_illuminance0_target_input);
 | |
| 
 | |
| static DEVICE_ATTR_WO(in_illuminance0_calibrate);
 | |
| 
 | |
| static DEVICE_ATTR_WO(in_proximity0_calibrate);
 | |
| 
 | |
| static DEVICE_ATTR_RW(in_illuminance0_lux_table);
 | |
| 
 | |
| /* Use the default register values to identify the Taos device */
 | |
| static int tsl2772_device_id_verif(int id, int target)
 | |
| {
 | |
| 	switch (target) {
 | |
| 	case tsl2571:
 | |
| 	case tsl2671:
 | |
| 	case tsl2771:
 | |
| 		return (id & 0xf0) == TRITON_ID;
 | |
| 	case tmd2671:
 | |
| 	case tmd2771:
 | |
| 		return (id & 0xf0) == HALIBUT_ID;
 | |
| 	case tsl2572:
 | |
| 	case tsl2672:
 | |
| 	case tmd2672:
 | |
| 	case tsl2772:
 | |
| 	case tmd2772:
 | |
| 	case apds9930:
 | |
| 		return (id & 0xf0) == SWORDFISH_ID;
 | |
| 	}
 | |
| 
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static irqreturn_t tsl2772_event_handler(int irq, void *private)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = private;
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	s64 timestamp = iio_get_time_ns(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = tsl2772_read_status(chip);
 | |
| 	if (ret < 0)
 | |
| 		return IRQ_HANDLED;
 | |
| 
 | |
| 	/* What type of interrupt do we need to process */
 | |
| 	if (ret & TSL2772_STA_PRX_INTR) {
 | |
| 		iio_push_event(indio_dev,
 | |
| 			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
 | |
| 						    0,
 | |
| 						    IIO_EV_TYPE_THRESH,
 | |
| 						    IIO_EV_DIR_EITHER),
 | |
| 			       timestamp);
 | |
| 	}
 | |
| 
 | |
| 	if (ret & TSL2772_STA_ALS_INTR) {
 | |
| 		iio_push_event(indio_dev,
 | |
| 			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
 | |
| 						    0,
 | |
| 						    IIO_EV_TYPE_THRESH,
 | |
| 						    IIO_EV_DIR_EITHER),
 | |
| 			       timestamp);
 | |
| 	}
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(chip->client,
 | |
| 				   TSL2772_CMD_REG | TSL2772_CMD_SPL_FN |
 | |
| 				   TSL2772_CMD_PROXALS_INT_CLR);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(&chip->client->dev,
 | |
| 			"%s: failed to clear interrupt status: %d\n",
 | |
| 			__func__, ret);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static struct attribute *tsl2772_ALS_device_attrs[] = {
 | |
| 	&dev_attr_in_illuminance0_target_input.attr,
 | |
| 	&dev_attr_in_illuminance0_calibrate.attr,
 | |
| 	&dev_attr_in_illuminance0_lux_table.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static struct attribute *tsl2772_PRX_device_attrs[] = {
 | |
| 	&dev_attr_in_proximity0_calibrate.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static struct attribute *tsl2772_ALSPRX_device_attrs[] = {
 | |
| 	&dev_attr_in_illuminance0_target_input.attr,
 | |
| 	&dev_attr_in_illuminance0_calibrate.attr,
 | |
| 	&dev_attr_in_illuminance0_lux_table.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static struct attribute *tsl2772_PRX2_device_attrs[] = {
 | |
| 	&dev_attr_in_proximity0_calibrate.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static struct attribute *tsl2772_ALSPRX2_device_attrs[] = {
 | |
| 	&dev_attr_in_illuminance0_target_input.attr,
 | |
| 	&dev_attr_in_illuminance0_calibrate.attr,
 | |
| 	&dev_attr_in_illuminance0_lux_table.attr,
 | |
| 	&dev_attr_in_proximity0_calibrate.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group tsl2772_device_attr_group_tbl[] = {
 | |
| 	[ALS] = {
 | |
| 		.attrs = tsl2772_ALS_device_attrs,
 | |
| 	},
 | |
| 	[PRX] = {
 | |
| 		.attrs = tsl2772_PRX_device_attrs,
 | |
| 	},
 | |
| 	[ALSPRX] = {
 | |
| 		.attrs = tsl2772_ALSPRX_device_attrs,
 | |
| 	},
 | |
| 	[PRX2] = {
 | |
| 		.attrs = tsl2772_PRX2_device_attrs,
 | |
| 	},
 | |
| 	[ALSPRX2] = {
 | |
| 		.attrs = tsl2772_ALSPRX2_device_attrs,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| #define TSL2772_DEVICE_INFO(type)[type] = \
 | |
| 	{ \
 | |
| 		.attrs = &tsl2772_device_attr_group_tbl[type], \
 | |
| 		.read_raw = &tsl2772_read_raw, \
 | |
| 		.read_avail = &tsl2772_read_avail, \
 | |
| 		.write_raw = &tsl2772_write_raw, \
 | |
| 		.read_event_value = &tsl2772_read_event_value, \
 | |
| 		.write_event_value = &tsl2772_write_event_value, \
 | |
| 		.read_event_config = &tsl2772_read_interrupt_config, \
 | |
| 		.write_event_config = &tsl2772_write_interrupt_config, \
 | |
| 	}
 | |
| 
 | |
| static const struct iio_info tsl2772_device_info[] = {
 | |
| 	TSL2772_DEVICE_INFO(ALS),
 | |
| 	TSL2772_DEVICE_INFO(PRX),
 | |
| 	TSL2772_DEVICE_INFO(ALSPRX),
 | |
| 	TSL2772_DEVICE_INFO(PRX2),
 | |
| 	TSL2772_DEVICE_INFO(ALSPRX2),
 | |
| };
 | |
| 
 | |
| static const struct iio_event_spec tsl2772_events[] = {
 | |
| 	{
 | |
| 		.type = IIO_EV_TYPE_THRESH,
 | |
| 		.dir = IIO_EV_DIR_RISING,
 | |
| 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
 | |
| 	}, {
 | |
| 		.type = IIO_EV_TYPE_THRESH,
 | |
| 		.dir = IIO_EV_DIR_FALLING,
 | |
| 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
 | |
| 	}, {
 | |
| 		.type = IIO_EV_TYPE_THRESH,
 | |
| 		.dir = IIO_EV_DIR_EITHER,
 | |
| 		.mask_separate = BIT(IIO_EV_INFO_PERIOD) |
 | |
| 			BIT(IIO_EV_INFO_ENABLE),
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct tsl2772_chip_info tsl2772_chip_info_tbl[] = {
 | |
| 	[ALS] = {
 | |
| 		.channel_with_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			},
 | |
| 		},
 | |
| 		.channel_without_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			},
 | |
| 		},
 | |
| 		.chan_table_elements = 3,
 | |
| 		.info = &tsl2772_device_info[ALS],
 | |
| 	},
 | |
| 	[PRX] = {
 | |
| 		.channel_with_events = {
 | |
| 			{
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			},
 | |
| 		},
 | |
| 		.channel_without_events = {
 | |
| 			{
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			},
 | |
| 		},
 | |
| 		.chan_table_elements = 1,
 | |
| 		.info = &tsl2772_device_info[PRX],
 | |
| 	},
 | |
| 	[ALSPRX] = {
 | |
| 		.channel_with_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			}, {
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			},
 | |
| 		},
 | |
| 		.channel_without_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			}, {
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			},
 | |
| 		},
 | |
| 		.chan_table_elements = 4,
 | |
| 		.info = &tsl2772_device_info[ALSPRX],
 | |
| 	},
 | |
| 	[PRX2] = {
 | |
| 		.channel_with_events = {
 | |
| 			{
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			},
 | |
| 		},
 | |
| 		.channel_without_events = {
 | |
| 			{
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			},
 | |
| 		},
 | |
| 		.chan_table_elements = 1,
 | |
| 		.info = &tsl2772_device_info[PRX2],
 | |
| 	},
 | |
| 	[ALSPRX2] = {
 | |
| 		.channel_with_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			}, {
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.event_spec = tsl2772_events,
 | |
| 			.num_event_specs = ARRAY_SIZE(tsl2772_events),
 | |
| 			},
 | |
| 		},
 | |
| 		.channel_without_events = {
 | |
| 			{
 | |
| 			.type = IIO_LIGHT,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBBIAS),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_INT_TIME) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			}, {
 | |
| 			.type = IIO_INTENSITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 1,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 			}, {
 | |
| 			.type = IIO_PROXIMITY,
 | |
| 			.indexed = 1,
 | |
| 			.channel = 0,
 | |
| 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			.info_mask_separate_available =
 | |
| 				BIT(IIO_CHAN_INFO_CALIBSCALE),
 | |
| 			},
 | |
| 		},
 | |
| 		.chan_table_elements = 4,
 | |
| 		.info = &tsl2772_device_info[ALSPRX2],
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static int tsl2772_probe(struct i2c_client *clientp,
 | |
| 			 const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	struct tsl2772_chip *chip;
 | |
| 	int ret;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip = iio_priv(indio_dev);
 | |
| 	chip->client = clientp;
 | |
| 	i2c_set_clientdata(clientp, indio_dev);
 | |
| 
 | |
| 	chip->vddio_supply = tsl2772_get_regulator(chip, "vddio");
 | |
| 	if (IS_ERR(chip->vddio_supply))
 | |
| 		return PTR_ERR(chip->vddio_supply);
 | |
| 
 | |
| 	chip->vdd_supply = tsl2772_get_regulator(chip, "vdd");
 | |
| 	if (IS_ERR(chip->vdd_supply)) {
 | |
| 		regulator_disable(chip->vddio_supply);
 | |
| 		return PTR_ERR(chip->vdd_supply);
 | |
| 	}
 | |
| 
 | |
| 	ret = devm_add_action(&clientp->dev, tsl2772_disable_regulators_action,
 | |
| 			      chip);
 | |
| 	if (ret < 0) {
 | |
| 		tsl2772_disable_regulators_action(chip);
 | |
| 		dev_err(&clientp->dev, "Failed to setup regulator cleanup action %d\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME);
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(chip->client,
 | |
| 				       TSL2772_CMD_REG | TSL2772_CHIPID);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (tsl2772_device_id_verif(ret, id->driver_data) <= 0) {
 | |
| 		dev_info(&chip->client->dev,
 | |
| 			 "%s: i2c device found does not match expected id\n",
 | |
| 				__func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(clientp, TSL2772_CMD_REG | TSL2772_CNTRL);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&clientp->dev,
 | |
| 			"%s: Failed to write to CMD register: %d\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	mutex_init(&chip->als_mutex);
 | |
| 	mutex_init(&chip->prox_mutex);
 | |
| 
 | |
| 	chip->tsl2772_chip_status = TSL2772_CHIP_UNKNOWN;
 | |
| 	chip->pdata = dev_get_platdata(&clientp->dev);
 | |
| 	chip->id = id->driver_data;
 | |
| 	chip->chip_info =
 | |
| 		&tsl2772_chip_info_tbl[device_channel_config[id->driver_data]];
 | |
| 
 | |
| 	indio_dev->info = chip->chip_info->info;
 | |
| 	indio_dev->dev.parent = &clientp->dev;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 	indio_dev->name = chip->client->name;
 | |
| 	indio_dev->num_channels = chip->chip_info->chan_table_elements;
 | |
| 
 | |
| 	if (clientp->irq) {
 | |
| 		indio_dev->channels = chip->chip_info->channel_with_events;
 | |
| 
 | |
| 		ret = devm_request_threaded_irq(&clientp->dev, clientp->irq,
 | |
| 						NULL,
 | |
| 						&tsl2772_event_handler,
 | |
| 						IRQF_TRIGGER_FALLING |
 | |
| 						IRQF_ONESHOT,
 | |
| 						"TSL2772_event",
 | |
| 						indio_dev);
 | |
| 		if (ret) {
 | |
| 			dev_err(&clientp->dev,
 | |
| 				"%s: irq request failed\n", __func__);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	} else {
 | |
| 		indio_dev->channels = chip->chip_info->channel_without_events;
 | |
| 	}
 | |
| 
 | |
| 	tsl2772_defaults(chip);
 | |
| 	ret = tsl2772_chip_on(indio_dev);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = iio_device_register(indio_dev);
 | |
| 	if (ret) {
 | |
| 		tsl2772_chip_off(indio_dev);
 | |
| 		dev_err(&clientp->dev,
 | |
| 			"%s: iio registration failed\n", __func__);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tsl2772_suspend(struct device *dev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = tsl2772_chip_off(indio_dev);
 | |
| 	regulator_disable(chip->vdd_supply);
 | |
| 	regulator_disable(chip->vddio_supply);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tsl2772_resume(struct device *dev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 | |
| 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = tsl2772_enable_regulator(chip, chip->vddio_supply);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = tsl2772_enable_regulator(chip, chip->vdd_supply);
 | |
| 	if (ret < 0) {
 | |
| 		regulator_disable(chip->vddio_supply);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME);
 | |
| 
 | |
| 	return tsl2772_chip_on(indio_dev);
 | |
| }
 | |
| 
 | |
| static int tsl2772_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 | |
| 
 | |
| 	tsl2772_chip_off(indio_dev);
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id tsl2772_idtable[] = {
 | |
| 	{ "tsl2571", tsl2571 },
 | |
| 	{ "tsl2671", tsl2671 },
 | |
| 	{ "tmd2671", tmd2671 },
 | |
| 	{ "tsl2771", tsl2771 },
 | |
| 	{ "tmd2771", tmd2771 },
 | |
| 	{ "tsl2572", tsl2572 },
 | |
| 	{ "tsl2672", tsl2672 },
 | |
| 	{ "tmd2672", tmd2672 },
 | |
| 	{ "tsl2772", tsl2772 },
 | |
| 	{ "tmd2772", tmd2772 },
 | |
| 	{ "apds9930", apds9930},
 | |
| 	{}
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, tsl2772_idtable);
 | |
| 
 | |
| static const struct of_device_id tsl2772_of_match[] = {
 | |
| 	{ .compatible = "amstaos,tsl2571" },
 | |
| 	{ .compatible = "amstaos,tsl2671" },
 | |
| 	{ .compatible = "amstaos,tmd2671" },
 | |
| 	{ .compatible = "amstaos,tsl2771" },
 | |
| 	{ .compatible = "amstaos,tmd2771" },
 | |
| 	{ .compatible = "amstaos,tsl2572" },
 | |
| 	{ .compatible = "amstaos,tsl2672" },
 | |
| 	{ .compatible = "amstaos,tmd2672" },
 | |
| 	{ .compatible = "amstaos,tsl2772" },
 | |
| 	{ .compatible = "amstaos,tmd2772" },
 | |
| 	{ .compatible = "avago,apds9930" },
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, tsl2772_of_match);
 | |
| 
 | |
| static const struct dev_pm_ops tsl2772_pm_ops = {
 | |
| 	.suspend = tsl2772_suspend,
 | |
| 	.resume  = tsl2772_resume,
 | |
| };
 | |
| 
 | |
| static struct i2c_driver tsl2772_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "tsl2772",
 | |
| 		.of_match_table = tsl2772_of_match,
 | |
| 		.pm = &tsl2772_pm_ops,
 | |
| 	},
 | |
| 	.id_table = tsl2772_idtable,
 | |
| 	.probe = tsl2772_probe,
 | |
| 	.remove = tsl2772_remove,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(tsl2772_driver);
 | |
| 
 | |
| MODULE_AUTHOR("J. August Brenner <Jon.Brenner@ams.com>");
 | |
| MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
 | |
| MODULE_DESCRIPTION("TAOS tsl2772 ambient and proximity light sensor driver");
 | |
| MODULE_LICENSE("GPL");
 |