forked from mirrors/linux
		
	 a86854d0c5
			
		
	
	
		a86854d0c5
		
	
	
	
	
		
			
			The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
        devm_kzalloc(handle, a * b, gfp)
with:
        devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
        devm_kzalloc(handle, a * b * c, gfp)
with:
        devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
        devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
        devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
		
	
			
		
			
				
	
	
		
			549 lines
		
	
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			549 lines
		
	
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * TI LP855x Backlight Driver
 | |
|  *
 | |
|  *			Copyright (C) 2011 Texas Instruments
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/backlight.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_data/lp855x.h>
 | |
| #include <linux/pwm.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| 
 | |
| /* LP8550/1/2/3/6 Registers */
 | |
| #define LP855X_BRIGHTNESS_CTRL		0x00
 | |
| #define LP855X_DEVICE_CTRL		0x01
 | |
| #define LP855X_EEPROM_START		0xA0
 | |
| #define LP855X_EEPROM_END		0xA7
 | |
| #define LP8556_EPROM_START		0xA0
 | |
| #define LP8556_EPROM_END		0xAF
 | |
| 
 | |
| /* LP8555/7 Registers */
 | |
| #define LP8557_BL_CMD			0x00
 | |
| #define LP8557_BL_MASK			0x01
 | |
| #define LP8557_BL_ON			0x01
 | |
| #define LP8557_BL_OFF			0x00
 | |
| #define LP8557_BRIGHTNESS_CTRL		0x04
 | |
| #define LP8557_CONFIG			0x10
 | |
| #define LP8555_EPROM_START		0x10
 | |
| #define LP8555_EPROM_END		0x7A
 | |
| #define LP8557_EPROM_START		0x10
 | |
| #define LP8557_EPROM_END		0x1E
 | |
| 
 | |
| #define DEFAULT_BL_NAME		"lcd-backlight"
 | |
| #define MAX_BRIGHTNESS		255
 | |
| 
 | |
| enum lp855x_brightness_ctrl_mode {
 | |
| 	PWM_BASED = 1,
 | |
| 	REGISTER_BASED,
 | |
| };
 | |
| 
 | |
| struct lp855x;
 | |
| 
 | |
| /*
 | |
|  * struct lp855x_device_config
 | |
|  * @pre_init_device: init device function call before updating the brightness
 | |
|  * @reg_brightness: register address for brigthenss control
 | |
|  * @reg_devicectrl: register address for device control
 | |
|  * @post_init_device: late init device function call
 | |
|  */
 | |
| struct lp855x_device_config {
 | |
| 	int (*pre_init_device)(struct lp855x *);
 | |
| 	u8 reg_brightness;
 | |
| 	u8 reg_devicectrl;
 | |
| 	int (*post_init_device)(struct lp855x *);
 | |
| };
 | |
| 
 | |
| struct lp855x {
 | |
| 	const char *chipname;
 | |
| 	enum lp855x_chip_id chip_id;
 | |
| 	enum lp855x_brightness_ctrl_mode mode;
 | |
| 	struct lp855x_device_config *cfg;
 | |
| 	struct i2c_client *client;
 | |
| 	struct backlight_device *bl;
 | |
| 	struct device *dev;
 | |
| 	struct lp855x_platform_data *pdata;
 | |
| 	struct pwm_device *pwm;
 | |
| 	struct regulator *supply;	/* regulator for VDD input */
 | |
| 	struct regulator *enable;	/* regulator for EN/VDDIO input */
 | |
| };
 | |
| 
 | |
| static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
 | |
| {
 | |
| 	return i2c_smbus_write_byte_data(lp->client, reg, data);
 | |
| }
 | |
| 
 | |
| static int lp855x_update_bit(struct lp855x *lp, u8 reg, u8 mask, u8 data)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 tmp;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(lp->client, reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	tmp = (u8)ret;
 | |
| 	tmp &= ~mask;
 | |
| 	tmp |= data & mask;
 | |
| 
 | |
| 	return lp855x_write_byte(lp, reg, tmp);
 | |
| }
 | |
| 
 | |
| static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
 | |
| {
 | |
| 	u8 start, end;
 | |
| 
 | |
| 	switch (lp->chip_id) {
 | |
| 	case LP8550:
 | |
| 	case LP8551:
 | |
| 	case LP8552:
 | |
| 	case LP8553:
 | |
| 		start = LP855X_EEPROM_START;
 | |
| 		end = LP855X_EEPROM_END;
 | |
| 		break;
 | |
| 	case LP8556:
 | |
| 		start = LP8556_EPROM_START;
 | |
| 		end = LP8556_EPROM_END;
 | |
| 		break;
 | |
| 	case LP8555:
 | |
| 		start = LP8555_EPROM_START;
 | |
| 		end = LP8555_EPROM_END;
 | |
| 		break;
 | |
| 	case LP8557:
 | |
| 		start = LP8557_EPROM_START;
 | |
| 		end = LP8557_EPROM_END;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return false;
 | |
| 	}
 | |
| 
 | |
| 	return addr >= start && addr <= end;
 | |
| }
 | |
| 
 | |
| static int lp8557_bl_off(struct lp855x *lp)
 | |
| {
 | |
| 	/* BL_ON = 0 before updating EPROM settings */
 | |
| 	return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK,
 | |
| 				LP8557_BL_OFF);
 | |
| }
 | |
| 
 | |
| static int lp8557_bl_on(struct lp855x *lp)
 | |
| {
 | |
| 	/* BL_ON = 1 after updating EPROM settings */
 | |
| 	return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK,
 | |
| 				LP8557_BL_ON);
 | |
| }
 | |
| 
 | |
| static struct lp855x_device_config lp855x_dev_cfg = {
 | |
| 	.reg_brightness = LP855X_BRIGHTNESS_CTRL,
 | |
| 	.reg_devicectrl = LP855X_DEVICE_CTRL,
 | |
| };
 | |
| 
 | |
| static struct lp855x_device_config lp8557_dev_cfg = {
 | |
| 	.reg_brightness = LP8557_BRIGHTNESS_CTRL,
 | |
| 	.reg_devicectrl = LP8557_CONFIG,
 | |
| 	.pre_init_device = lp8557_bl_off,
 | |
| 	.post_init_device = lp8557_bl_on,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Device specific configuration flow
 | |
|  *
 | |
|  *    a) pre_init_device(optional)
 | |
|  *    b) update the brightness register
 | |
|  *    c) update device control register
 | |
|  *    d) update ROM area(optional)
 | |
|  *    e) post_init_device(optional)
 | |
|  *
 | |
|  */
 | |
| static int lp855x_configure(struct lp855x *lp)
 | |
| {
 | |
| 	u8 val, addr;
 | |
| 	int i, ret;
 | |
| 	struct lp855x_platform_data *pd = lp->pdata;
 | |
| 
 | |
| 	switch (lp->chip_id) {
 | |
| 	case LP8550:
 | |
| 	case LP8551:
 | |
| 	case LP8552:
 | |
| 	case LP8553:
 | |
| 	case LP8556:
 | |
| 		lp->cfg = &lp855x_dev_cfg;
 | |
| 		break;
 | |
| 	case LP8555:
 | |
| 	case LP8557:
 | |
| 		lp->cfg = &lp8557_dev_cfg;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (lp->cfg->pre_init_device) {
 | |
| 		ret = lp->cfg->pre_init_device(lp);
 | |
| 		if (ret) {
 | |
| 			dev_err(lp->dev, "pre init device err: %d\n", ret);
 | |
| 			goto err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	val = pd->initial_brightness;
 | |
| 	ret = lp855x_write_byte(lp, lp->cfg->reg_brightness, val);
 | |
| 	if (ret)
 | |
| 		goto err;
 | |
| 
 | |
| 	val = pd->device_control;
 | |
| 	ret = lp855x_write_byte(lp, lp->cfg->reg_devicectrl, val);
 | |
| 	if (ret)
 | |
| 		goto err;
 | |
| 
 | |
| 	if (pd->size_program > 0) {
 | |
| 		for (i = 0; i < pd->size_program; i++) {
 | |
| 			addr = pd->rom_data[i].addr;
 | |
| 			val = pd->rom_data[i].val;
 | |
| 			if (!lp855x_is_valid_rom_area(lp, addr))
 | |
| 				continue;
 | |
| 
 | |
| 			ret = lp855x_write_byte(lp, addr, val);
 | |
| 			if (ret)
 | |
| 				goto err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (lp->cfg->post_init_device) {
 | |
| 		ret = lp->cfg->post_init_device(lp);
 | |
| 		if (ret) {
 | |
| 			dev_err(lp->dev, "post init device err: %d\n", ret);
 | |
| 			goto err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
 | |
| {
 | |
| 	unsigned int period = lp->pdata->period_ns;
 | |
| 	unsigned int duty = br * period / max_br;
 | |
| 	struct pwm_device *pwm;
 | |
| 
 | |
| 	/* request pwm device with the consumer name */
 | |
| 	if (!lp->pwm) {
 | |
| 		pwm = devm_pwm_get(lp->dev, lp->chipname);
 | |
| 		if (IS_ERR(pwm))
 | |
| 			return;
 | |
| 
 | |
| 		lp->pwm = pwm;
 | |
| 
 | |
| 		/*
 | |
| 		 * FIXME: pwm_apply_args() should be removed when switching to
 | |
| 		 * the atomic PWM API.
 | |
| 		 */
 | |
| 		pwm_apply_args(pwm);
 | |
| 	}
 | |
| 
 | |
| 	pwm_config(lp->pwm, duty, period);
 | |
| 	if (duty)
 | |
| 		pwm_enable(lp->pwm);
 | |
| 	else
 | |
| 		pwm_disable(lp->pwm);
 | |
| }
 | |
| 
 | |
| static int lp855x_bl_update_status(struct backlight_device *bl)
 | |
| {
 | |
| 	struct lp855x *lp = bl_get_data(bl);
 | |
| 	int brightness = bl->props.brightness;
 | |
| 
 | |
| 	if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 | |
| 		brightness = 0;
 | |
| 
 | |
| 	if (lp->mode == PWM_BASED)
 | |
| 		lp855x_pwm_ctrl(lp, brightness, bl->props.max_brightness);
 | |
| 	else if (lp->mode == REGISTER_BASED)
 | |
| 		lp855x_write_byte(lp, lp->cfg->reg_brightness, (u8)brightness);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct backlight_ops lp855x_bl_ops = {
 | |
| 	.options = BL_CORE_SUSPENDRESUME,
 | |
| 	.update_status = lp855x_bl_update_status,
 | |
| };
 | |
| 
 | |
| static int lp855x_backlight_register(struct lp855x *lp)
 | |
| {
 | |
| 	struct backlight_device *bl;
 | |
| 	struct backlight_properties props;
 | |
| 	struct lp855x_platform_data *pdata = lp->pdata;
 | |
| 	const char *name = pdata->name ? : DEFAULT_BL_NAME;
 | |
| 
 | |
| 	memset(&props, 0, sizeof(props));
 | |
| 	props.type = BACKLIGHT_PLATFORM;
 | |
| 	props.max_brightness = MAX_BRIGHTNESS;
 | |
| 
 | |
| 	if (pdata->initial_brightness > props.max_brightness)
 | |
| 		pdata->initial_brightness = props.max_brightness;
 | |
| 
 | |
| 	props.brightness = pdata->initial_brightness;
 | |
| 
 | |
| 	bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
 | |
| 				       &lp855x_bl_ops, &props);
 | |
| 	if (IS_ERR(bl))
 | |
| 		return PTR_ERR(bl);
 | |
| 
 | |
| 	lp->bl = bl;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static ssize_t lp855x_get_chip_id(struct device *dev,
 | |
| 				struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct lp855x *lp = dev_get_drvdata(dev);
 | |
| 
 | |
| 	return scnprintf(buf, PAGE_SIZE, "%s\n", lp->chipname);
 | |
| }
 | |
| 
 | |
| static ssize_t lp855x_get_bl_ctl_mode(struct device *dev,
 | |
| 				     struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct lp855x *lp = dev_get_drvdata(dev);
 | |
| 	char *strmode = NULL;
 | |
| 
 | |
| 	if (lp->mode == PWM_BASED)
 | |
| 		strmode = "pwm based";
 | |
| 	else if (lp->mode == REGISTER_BASED)
 | |
| 		strmode = "register based";
 | |
| 
 | |
| 	return scnprintf(buf, PAGE_SIZE, "%s\n", strmode);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(chip_id, S_IRUGO, lp855x_get_chip_id, NULL);
 | |
| static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp855x_get_bl_ctl_mode, NULL);
 | |
| 
 | |
| static struct attribute *lp855x_attributes[] = {
 | |
| 	&dev_attr_chip_id.attr,
 | |
| 	&dev_attr_bl_ctl_mode.attr,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct attribute_group lp855x_attr_group = {
 | |
| 	.attrs = lp855x_attributes,
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static int lp855x_parse_dt(struct lp855x *lp)
 | |
| {
 | |
| 	struct device *dev = lp->dev;
 | |
| 	struct device_node *node = dev->of_node;
 | |
| 	struct lp855x_platform_data *pdata;
 | |
| 	int rom_length;
 | |
| 
 | |
| 	if (!node) {
 | |
| 		dev_err(dev, "no platform data\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 	if (!pdata)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	of_property_read_string(node, "bl-name", &pdata->name);
 | |
| 	of_property_read_u8(node, "dev-ctrl", &pdata->device_control);
 | |
| 	of_property_read_u8(node, "init-brt", &pdata->initial_brightness);
 | |
| 	of_property_read_u32(node, "pwm-period", &pdata->period_ns);
 | |
| 
 | |
| 	/* Fill ROM platform data if defined */
 | |
| 	rom_length = of_get_child_count(node);
 | |
| 	if (rom_length > 0) {
 | |
| 		struct lp855x_rom_data *rom;
 | |
| 		struct device_node *child;
 | |
| 		int i = 0;
 | |
| 
 | |
| 		rom = devm_kcalloc(dev, rom_length, sizeof(*rom), GFP_KERNEL);
 | |
| 		if (!rom)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		for_each_child_of_node(node, child) {
 | |
| 			of_property_read_u8(child, "rom-addr", &rom[i].addr);
 | |
| 			of_property_read_u8(child, "rom-val", &rom[i].val);
 | |
| 			i++;
 | |
| 		}
 | |
| 
 | |
| 		pdata->size_program = rom_length;
 | |
| 		pdata->rom_data = &rom[0];
 | |
| 	}
 | |
| 
 | |
| 	lp->pdata = pdata;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #else
 | |
| static int lp855x_parse_dt(struct lp855x *lp)
 | |
| {
 | |
| 	return -EINVAL;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct lp855x *lp;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
 | |
| 		return -EIO;
 | |
| 
 | |
| 	lp = devm_kzalloc(&cl->dev, sizeof(struct lp855x), GFP_KERNEL);
 | |
| 	if (!lp)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	lp->client = cl;
 | |
| 	lp->dev = &cl->dev;
 | |
| 	lp->chipname = id->name;
 | |
| 	lp->chip_id = id->driver_data;
 | |
| 	lp->pdata = dev_get_platdata(&cl->dev);
 | |
| 
 | |
| 	if (!lp->pdata) {
 | |
| 		ret = lp855x_parse_dt(lp);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	if (lp->pdata->period_ns > 0)
 | |
| 		lp->mode = PWM_BASED;
 | |
| 	else
 | |
| 		lp->mode = REGISTER_BASED;
 | |
| 
 | |
| 	lp->supply = devm_regulator_get(lp->dev, "power");
 | |
| 	if (IS_ERR(lp->supply)) {
 | |
| 		if (PTR_ERR(lp->supply) == -EPROBE_DEFER)
 | |
| 			return -EPROBE_DEFER;
 | |
| 		lp->supply = NULL;
 | |
| 	}
 | |
| 
 | |
| 	lp->enable = devm_regulator_get_optional(lp->dev, "enable");
 | |
| 	if (IS_ERR(lp->enable)) {
 | |
| 		ret = PTR_ERR(lp->enable);
 | |
| 		if (ret == -ENODEV) {
 | |
| 			lp->enable = NULL;
 | |
| 		} else {
 | |
| 			if (ret != -EPROBE_DEFER)
 | |
| 				dev_err(lp->dev, "error getting enable regulator: %d\n",
 | |
| 					ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (lp->supply) {
 | |
| 		ret = regulator_enable(lp->supply);
 | |
| 		if (ret < 0) {
 | |
| 			dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (lp->enable) {
 | |
| 		ret = regulator_enable(lp->enable);
 | |
| 		if (ret < 0) {
 | |
| 			dev_err(lp->dev, "failed to enable vddio: %d\n", ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * LP8555 datasheet says t_RESPONSE (time between VDDIO and
 | |
| 		 * I2C) is 1ms.
 | |
| 		 */
 | |
| 		usleep_range(1000, 2000);
 | |
| 	}
 | |
| 
 | |
| 	i2c_set_clientdata(cl, lp);
 | |
| 
 | |
| 	ret = lp855x_configure(lp);
 | |
| 	if (ret) {
 | |
| 		dev_err(lp->dev, "device config err: %d", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = lp855x_backlight_register(lp);
 | |
| 	if (ret) {
 | |
| 		dev_err(lp->dev,
 | |
| 			"failed to register backlight. err: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group);
 | |
| 	if (ret) {
 | |
| 		dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	backlight_update_status(lp->bl);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int lp855x_remove(struct i2c_client *cl)
 | |
| {
 | |
| 	struct lp855x *lp = i2c_get_clientdata(cl);
 | |
| 
 | |
| 	lp->bl->props.brightness = 0;
 | |
| 	backlight_update_status(lp->bl);
 | |
| 	if (lp->supply)
 | |
| 		regulator_disable(lp->supply);
 | |
| 	sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id lp855x_dt_ids[] = {
 | |
| 	{ .compatible = "ti,lp8550", },
 | |
| 	{ .compatible = "ti,lp8551", },
 | |
| 	{ .compatible = "ti,lp8552", },
 | |
| 	{ .compatible = "ti,lp8553", },
 | |
| 	{ .compatible = "ti,lp8555", },
 | |
| 	{ .compatible = "ti,lp8556", },
 | |
| 	{ .compatible = "ti,lp8557", },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, lp855x_dt_ids);
 | |
| 
 | |
| static const struct i2c_device_id lp855x_ids[] = {
 | |
| 	{"lp8550", LP8550},
 | |
| 	{"lp8551", LP8551},
 | |
| 	{"lp8552", LP8552},
 | |
| 	{"lp8553", LP8553},
 | |
| 	{"lp8555", LP8555},
 | |
| 	{"lp8556", LP8556},
 | |
| 	{"lp8557", LP8557},
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, lp855x_ids);
 | |
| 
 | |
| static struct i2c_driver lp855x_driver = {
 | |
| 	.driver = {
 | |
| 		   .name = "lp855x",
 | |
| 		   .of_match_table = of_match_ptr(lp855x_dt_ids),
 | |
| 		   },
 | |
| 	.probe = lp855x_probe,
 | |
| 	.remove = lp855x_remove,
 | |
| 	.id_table = lp855x_ids,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(lp855x_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
 | |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
 | |
| MODULE_LICENSE("GPL");
 |