forked from mirrors/linux
a7c699d090
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
# stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }'
dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0
...
2. disas /s works correctly in gdb, with source and disassembly
interspersed:
# gdb vmlinux --batch -ex 'disas /s blk_op_str'
Dump of assembler code for function blk_op_str:
block/blk-core.c:
125 {
0xffffffff814c8740 <+0>: endbr64
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax
0xffffffff814c874b <+11>: cmp $0x23,%edi
0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40>
0xffffffff814c8750 <+16>: mov %edi,%edi
126 const char *op_str = "UNKNOWN";
0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax
126 const char *op_str = "UNKNOWN";
0xffffffff814c8761 <+33>: test %rax,%rax
0xffffffff814c8764 <+36>: cmove %rdx,%rax
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
65 lines
1.7 KiB
Bash
Executable file
65 lines
1.7 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Output a simple RPM spec file.
|
|
# This version assumes a minimum of RPM 4.13
|
|
#
|
|
# The only gothic bit here is redefining install_post to avoid
|
|
# stripping the symbols from files in the kernel which we want
|
|
#
|
|
# Patched for non-x86 by Opencon (L) 2002 <opencon@rio.skydome.net>
|
|
#
|
|
|
|
set -eu
|
|
|
|
output=$1
|
|
|
|
mkdir -p "$(dirname "${output}")"
|
|
|
|
exec >"${output}"
|
|
|
|
if grep -q CONFIG_MODULES=y include/config/auto.conf; then
|
|
echo '%define with_devel %{?_without_devel: 0} %{?!_without_devel: 1}'
|
|
else
|
|
echo '%define with_devel 0'
|
|
fi
|
|
|
|
# debuginfo package generation uses find-debuginfo.sh under the hood,
|
|
# which only works on uncompressed modules that contain debuginfo
|
|
if grep -q CONFIG_DEBUG_INFO=y include/config/auto.conf &&
|
|
(! grep -q CONFIG_MODULE_COMPRESS=y include/config/auto.conf) &&
|
|
(! grep -q CONFIG_DEBUG_INFO_SPLIT=y include/config/auto.conf); then
|
|
echo '%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}'
|
|
else
|
|
echo '%define with_debuginfo 0'
|
|
fi
|
|
|
|
cat<<EOF
|
|
%define ARCH ${ARCH}
|
|
%define KERNELRELEASE ${KERNELRELEASE}
|
|
%define pkg_release $("${srctree}/scripts/build-version")
|
|
EOF
|
|
|
|
cat "${srctree}/scripts/package/kernel.spec"
|
|
|
|
# collect the user's name and email address for the changelog entry
|
|
if [ "$(command -v git)" ]; then
|
|
name=$(git config user.name) || true
|
|
email=$(git config user.email) || true
|
|
fi
|
|
|
|
if [ ! "${name:+set}" ]; then
|
|
name=${KBUILD_BUILD_USER:-$(id -nu)}
|
|
fi
|
|
|
|
if [ ! "${email:+set}" ]; then
|
|
buildhost=${KBUILD_BUILD_HOST:-$(hostname -f 2>/dev/null || hostname)}
|
|
builduser=${KBUILD_BUILD_USER:-$(id -nu)}
|
|
email="${builduser}@${buildhost}"
|
|
fi
|
|
|
|
cat << EOF
|
|
|
|
%changelog
|
|
* $(LC_ALL=C date +'%a %b %d %Y') ${name} <${email}>
|
|
- Custom built Linux kernel.
|
|
EOF
|